Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 33 views

    Pic246 Ds24641 Datasheet 2

    Uploaded by

    Micah Kiprop
    The PIC246 is a compact, economical loop-powered transmitter for monitoring electronic pressure in applications requiring accuracy and flexibility. It converts input pressure signals into a 4-20mA current output using a piezoresistive silicon pressure transducer. It is suitable for use in 12V battery systems or automotive applications with a minimum supply voltage of 7V. Front panel zero and span adjustments allow for calibration without disconnecting output wires.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Pic246 Ds24641 Datasheet 2

    Uploaded by

    Micah Kiprop
    33 views2 pages
    The PIC246 is a compact, economical loop-powered transmitter for monitoring electronic pressure in applications requiring accuracy and flexibility. It converts input pressure signals into a 4-20mA current output using a piezoresistive silicon pressure transducer. It is suitable for use in 12V battery systems or automotive applications with a minimum supply voltage of 7V. Front panel zero and span adjustments allow for calibration without disconnecting output wires.

    Original Description:

    Free

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The PIC246 is a compact, economical loop-powered transmitter for monitoring electronic pressure in applications requiring accuracy and flexibility. It converts input pressure signals into a 4-20mA current output using a piezoresistive silicon pressure transducer. It is suitable for use in 12V battery systems or automotive applications with a minimum supply voltage of 7V. Front panel zero and span adjustments allow for calibration without disconnecting output wires.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    33 views2 pages

    Pic246 Ds24641 Datasheet 2

    Uploaded by

    Micah Kiprop
    The PIC246 is a compact, economical loop-powered transmitter for monitoring electronic pressure in applications requiring accuracy and flexibility. It converts input pressure signals into a 4-20mA current output using a piezoresistive silicon pressure transducer. It is suitable for use in 12V battery systems or automotive applications with a minimum supply voltage of 7V. Front panel zero and span adjustments allow for calibration without disconnecting output wires.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    Pressure To Current Converter v4 PIC246

    DESCRIPTION
    The PIC246 is a loop-powered transmitter for use in applications that require
    electronic pressure monitoring. Both differential pressure and gauge pressure
    versions are available. The PIC246 offers an economical solution combining
    compactness with accuracy and flexibility. Standard output is 4 - 20mA with a
    minimum supply voltage of 7V. This enables the PIC246 to be used in 12V battery
    supply systems or in automotive applications. Other factory set output configurations
    are 10 - 50mA loop powered and 0 - 10mA, 0 - 20mA or voltage output in 3-wire
    connection. Reference for 3-wire connection is the negative supply. The heart of the
    unit is a piezo resistive silicon pressure transducer, providing high accuracy, long life
    and total adjust-ability. Double surge protection is standard with all Series 200 loop
    powered transmitters to prevent failure due to spikes induced by DC switched
    inductive loads. Final calibration is trimmed using the front accessible zero and span
    15-turn trim adjustments. A front mounted LED and a test socket verify module
    function and assist in calibration checks without disconnection of output wires.

    General Specifications
    Mounting: Clip for 35mm DIN-Rail
    Case size: 23.5W x 71.5H x 109D (mm).
    Case material: ABS.
    Connection: Screw terminals.
    Weight: 0.100 kg.
    Protection class: IP40. (IP65 use suitable
    enclosure).
    Input pressure ranges: 2kPa up to 0 - 200kPa.
    (200mmWG up to 20mWG).
    Medium compatibility: Air, low pressure steam, gasoline and oil vapours, ethylene glycol.
    Over pressure (max): 100kPa (all ranges).
    Static pressure: 100kPa.
    Accuracy: <1% of range (2% <2kPa range).
    Front ‘SPAN’ adjust: ±25% typical.
    Front ‘ZERO’ adjust: +20/ -10% typical.
    Linearity: ±1% of range.
    Pressure hysteresis: 0.05% of range.
    Temperature drift: 0.02% per °C.
    Supply voltage: 7 - 40V continuous (50V 30 seconds).
    SupplyVoltage−7V
    Load for 4 - 20mA output: RLmax= .
    0.02A
    Load change effect: 0.1% up to RL max.
    Electromagnetic compatibility: Complies with AS/NZS 4251.1 (EN 50081.1)

    For input / output combinations refer to TYPE NO. DESIGNATION overleaf.

    NESS Corporation Pressure To Current Converter v4 PIC246 Tel: (02) 8825 9295 www.apcs.net.au
    APCS division Drawing: DS24641 Issue: 2 2/11/20 Fax: (02) 8825 9290 Page: 1
    TYPE NO. DESIGNATION PIC246 - X X X X X
    Output:
    1 = 4 - 20mA. *) 6 = 0 - 1V.
    2 = 10 - 50mA. *) 7 = 0 - 5V min supply 10.5Vdc.
    *) 3 = 0 - 1mA. *) 8 = 0 - 10V min supply 15.5Vdc.
    *) 4 = 0 - 10mA. *) 9 = Other (Specify).
    *) 5 = 0 - 20mA.
    Input:
    3 = 1 to 10kPa Specify required calibration within the input range selected.
    6 = 10 to 100kPa.
    8 = 100 to 200kPa. Select 9 when using measurement 3 below
    Nozzle Type:
    1 = Barbed fitting for 3.5 - 4mm ID soft tube.
    *) 2 = Quick-Connect 3.2mm (1/8") OD tube (recommended tube SMC TE 1800 BG)
    *) 6 = Quick-Connect 6mm OD tube
    *) 7 = 1/4” NPT female
    Measurement:
    1 = Gauge pressure.
    *) 2 = Differential pressure.
    *) 3 = 0 - 120 kPa absolute (barometric).
    Options:
    0 = None. 3 = Reverse action.
    *) 2 = Output ramp. *) 9 = Other (Specify).

    *) = Price Extra.

    Front Control Explanation


    1. Test socket. Output signal access with
    reference to terminal (1) loop integrity is
    maintained when digital multi meter
    Rin <30Ω is used.
    2. Loop indicator. Dim at 4mA, bright at 20mA.
    3. SPAN (full scale) adjustment 15 turn.
    4. ZERO (start scale) adjustment 15 turn.

    *Note: RL is input load of PLC, VSD, or other process instruments.

    In the interest of development and improvement, APCS reserve the right to amend, without notice, details contained in this publication.
    APCS will accept no legal liability for any errors, omissions or amendments.

    NESS Corporation Pressure To Current Converter v4 PIC246 Tel: (02) 8825 9295 www.apcs.net.au
    APCS division Drawing: DS24641 Issue: 2 2/11/20 Fax: (02) 8825 9290 Page: 2

    You might also like