Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 185 views

    Calculation Sheet: Checking For Bearing Capacity of Lifting Hooks ACI 318-14 Standard

    Uploaded by

    Mai Salem
    This document provides a calculation sheet for checking the bearing capacity of rebar lifting hooks. It includes input data like the rebar diameter, concrete strength, and edge distance. It then calculates the factored shear load and checks the concrete breakout strength in shear according to ACI 318-14 standards. The calculation shows that the concrete breakout strength of 0.25 tons is less than the factored load of 2 tons, so the design fails this check.

    Copyright:

    © All Rights Reserved
    Download as XLS, PDF, TXT or read online from Scribd

    Calculation Sheet: Checking For Bearing Capacity of Lifting Hooks ACI 318-14 Standard

    Uploaded by

    Mai Salem
    185 views4 pages
    This document provides a calculation sheet for checking the bearing capacity of rebar lifting hooks. It includes input data like the rebar diameter, concrete strength, and edge distance. It then calculates the factored shear load and checks the concrete breakout strength in shear according to ACI 318-14 standards. The calculation shows that the concrete breakout strength of 0.25 tons is less than the factored load of 2 tons, so the design fails this check.

    Original Description:

    Caculation for lifting hook

    Original Title

    01- Caculation for lifting hook

    Copyright

    © © All Rights Reserved

    Available Formats

    XLS, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides a calculation sheet for checking the bearing capacity of rebar lifting hooks. It includes input data like the rebar diameter, concrete strength, and edge distance. It then calculates the factored shear load and checks the concrete breakout strength in shear according to ACI 318-14 standards. The calculation shows that the concrete breakout strength of 0.25 tons is less than the factored load of 2 tons, so the design fails this check.

    Copyright:

    © All Rights Reserved
    Download as XLS, PDF, TXT or read online from Scribd
    Download as xls, pdf, or txt
    185 views4 pages

    Calculation Sheet: Checking For Bearing Capacity of Lifting Hooks ACI 318-14 Standard

    Uploaded by

    Mai Salem
    This document provides a calculation sheet for checking the bearing capacity of rebar lifting hooks. It includes input data like the rebar diameter, concrete strength, and edge distance. It then calculates the factored shear load and checks the concrete breakout strength in shear according to ACI 318-14 standards. The calculation shows that the concrete breakout strength of 0.25 tons is less than the factored load of 2 tons, so the design fails this check.

    Copyright:

    © All Rights Reserved
    Download as XLS, PDF, TXT or read online from Scribd
    Download as xls, pdf, or txt
    of 4

    PROJECT : NGHI SON REFINERY AND PETROCHEMICAL COMPLEX PREPARED BY : NGO VAN TUAN

    CONTRACTOR : JGCS CONSORTIUM CHECKED BY : NGO VAN TUAN


    VINACONEX JSC SUB-CONTRACTOR : VINACONEX JSC DATE : 24-Aug-21 APPROVED BY : NGO VAN TUAN

    Checking for Bearing Capacity of Lifting Hooks ACI 318-14 Standard

    CALCULATION SHEET
    PROJECT : Metro Station PREPARED BY : Ngo Thi Thuy Mai
    CONTRACTOR : VNCN E&C CHECKED BY : Ngo Thi Thuy Mai
    DATE : 24-Aug-21 APPROVED BY : Ngo Thi Thuy Mai
    Checking for Bearing Capacity of Rebar ACI 318-14 Standard

    I. REFERENCE DOCUMENT
    - ACI 318-14: Building Code Requirements for Structural Concrete

    II. DATA INPUT


    1. DATA INPUT FOR LIFTING HOOKS

    Diameter of Rebar da = 16 mm

    Effective cross-sectional area of a Rebar in tensile Ase,N = 201 mm2

    Effective cross-sectional area of a Rebar in shear Ase,V = 201 mm2

    Anchorage depth of Rebar hef = 100 mm

    Development length of anchorage length lef = 100 mm

    Width of rebars if any w = 0 mm

    Specified compressive strength of concrete fc = 6 Mpa (Concrete grade M100)


    Thickness of concrete wall t = 100 mm

    Edge distance ca1 = 100 mm

    III. CHECKING BEARING CAPACITY OF SLINGS OR CHAINS


    1. CALCULATION OF ACTION LOAD

    The factored shear load in a Rebar: Vu = 2.00 Ton

    2. CHECKING CONCRETE BREAKOUT STRENGTH IN SHEAR


    Check concrete breakout strength in shear as following condition (ACI 318-14 17.3.1.1 & 17.5.2.1):

    AVc
     Vcb    ed ,V c ,V h ,V Vb  0.25 < Vua = 2.00 Ton Conclusion Fail
    AVco

    Where in, the strength reduce factor of Rebar in concrete: f = 0.45 (Refer to ACI 318-14 17.3.3)

    There in:
    - The basic concrete breakout strength of a single anchor in shear in cracked concrete (ACI 318-14 17.5.2.2):

      l  0.2 
    Vb   7  e  da  a f 'c (c1 )1.5  0.84 Ton
      da  
     
    - The load-bearing length of the anchor for shear (ACI 318-14 17.5.2.2):
    le = hef = 100.0 mm
    - The projected concrete failure area of single anchor for calculation of strength in shear (ACI 318-14 17.5.2.1):
    AVco = 4.5c2a1 = 45000 mm2
    - The projected concrete failure area of lifting hooks for calculation of strength in shear (ACI 318-14 17.5.2.1):
    AVc = 1.5c1 (2ca1) = 30000 mm2
    - The modification factor for edge effect for a single anchor loaded in shear (ACI 318-14 17.5.2.6)
    yed,V = 1
    - The modification factor for anchor located in region of a concrete member no cracking (ACI 318-14 17.5.2.7):
    yc,V = 1
    - The modification factor for post-installed anchors designed for uncraked concrete (ACI 318-14 17.4.2.8)

    (For cast-in anchors)


    1.5c1
     h ,V   1 (ha is very big)
    Min( ha ,1.5c1 )

    You might also like