Plant Documentation

16.07.2021 16:24:03
! = out of range
# = not read or communication error
* = parameter changed

1/14
 TAG: --------
t-mass 65
FieldServ S/N: E6113602000
Configuration

SYSTEM UNITS

UNIT MASS FLOW kg/h

UNIT MASS kg
UNIT COR.VOL.FL Nm³/h
UNIT COR.VOLUME Nm³
UNIT CV MASS MJ/kg
UNIT CV COR.VOL. MJ/Nm³
UNIT HEAT FLOW kW
# UNIT HEAT
UNIT PRESSURE BAR A
UNIT TEMPERATURE °C (CELSIUS)
UNIT DENSITY kg/m³
UNIT LENGTH MILLIMETER

SPECIAL-UNITS

TEXT ARB.MASS ----

QUICK SETUP

# T-DAT SAVE/LOAD

OPERATION

LANGUAGE PORTUGUES
* ACCESS CODE 0

16.07.2021 16:24:04
! = out of range
# = not read or communication error
* = parameter changed

2/14
 TAG: --------
t-mass 65
FieldServ S/N: E6113602000
Configuration

DEF.PRIVATE CODE 65
STATUS ACCESS ACCESS SERVICE
ACCESS CODE CNTR 101

USER INTERFACE

ASSIGN LINE 1 MASS FLOW

ASSIGN LINE 2 TOTALIZER 1
# FORMAT
# DISPLAY DAMPING s
# CONTRAST LCD %
# BACKLIGHT %

TOTALIZER 1

ASSIGN TOTALIZER MASS FLOW

# ASSIGN GAS GROUP
UNIT TOTALIZER kg

TOTALIZER 2

ASSIGN TOTALIZER OFF

HANDLING TOTAL.

# FAILSAFE ALL TOT

16.07.2021 16:24:04
! = out of range
# = not read or communication error
* = parameter changed

3/14
 TAG: --------
t-mass 65
FieldServ S/N: E6113602000
Configuration

CURRENT OUTPUT 1

ASSIGN CURRENT MASS FLOW

# ASSIGN GAS GROUP
# CURRENT SPAN
# VALUE 20mA kg/h
# TIME CONSTANT s
# FAILSAFE MODE
# OUTPUT SIGNAL
SIMULATION CURR. OFF
CURRENT ADJUST OFF

PULSE/STAT.OUT.1

OPERATION MODE PULSE

ASSIGN PULSE COR. VOLUME FLOW
# ASSIGN GAS GROUP
# PULSE VALUE Nm³/P
# PULSE WIDTH ms
# OUTPUT SIGNAL
# FAILSAFE MODE
SIMULATION PULSE OFF

COMMUNICATION

TAG NAME --------

# TAG DESCRIPTION
# FIELDBUS ADDRESS

16.07.2021 16:24:04
! = out of range
# = not read or communication error
* = parameter changed

4/14
 TAG: --------
t-mass 65
FieldServ S/N: E6113602000
Configuration

# HART PROTOCOL
# WRITE PROTECT
# MANUFACT ID
# DEVICE ID
# DEVICE REVISION

PROCESSPARAMETER

# PROC. PRESSURE 1 BAR A

# PROC. PRESSURE 2 BAR A
# PROC. PRESSURE BAR A
# REF. PRESSURE BAR A
# REF. TEMPERATURE °C (CELSIUS)
# REF.DENSITY kg/m³
# NET CAL. VALUE MJ/kg
ASSIGN LF-CUTOFF COR. VOLUME FLOW
# ON-VAL.LF-CUTOFF Nm³/h
# OFFVAL.LF-CUTOFF %
# INSTALL FACTOR

GAS

SELECT GROUP GAS GROUP 1

ANALYZER INPUT OFF
NO. OF GASES 1
GAS TYPE 1 BUTANE
CHECK VALUES OK

16.07.2021 16:24:04
! = out of range
# = not read or communication error
* = parameter changed

5/14
 TAG: --------
t-mass 65
FieldServ S/N: E6113602000
Configuration

HEAT FLOW

CAL. VALUE TYPE MASS

MODE 1 AUTO NET
MODE 2 AUTO NET
# REF.COMB.TEMP. °C (CELSIUS)

SYSTEM PARAMETER

# POS. ZERO RETURN

# FLOW DAMPING s

SENSOR DATA

# ZEROPOINT
# CALIBRATION DATE
# FLOW CONDITIONER
# NOMINAL DIAMETER

SUPERVISION

ASSIGN SYS.ERROR CANCEL

ASSIGN PROC.ERR. CANCEL
# ALARM DELAY s
# SYSTEM RESET
# TROUBLESHOOTING

16.07.2021 16:24:04
! = out of range
# = not read or communication error
* = parameter changed

6/14
 TAG: --------
t-mass 65
FieldServ S/N: E6113602000
Configuration

SIMULAT. SYSTEM

# SIM.FAILSAFEMODE
SIM. MEASURAND OFF

SENSOR VERSION

SENSOR TYPE FLOWCELL

SERIAL NUMBER E6113602000
# TRANS. SER. NR.
# SW-REV. S-DAT
# PRE-AMP. SW. NR.
# PRE-AMP. HW. NR.
# HW-REV. SENSOR
# HW-IDENT. SENSOR
# PROD-NO. SENSOR

AMP. VERSION

# DEVICE SOFTWARE
HW-REV. AMP. V1.00.00
SW-REV. AMP. V1.01.02
# SW-REV. T-DAT
SW-IDENT. AMP. 71137565
HW-IDENT. AMP. 71089741
PROD-NO. AMP. 0069975288
I/O TYPE I/O X0
# SW-REV. I/O

16.07.2021 16:24:04
! = out of range
# = not read or communication error
* = parameter changed

7/14
 TAG: --------
t-mass 65
FieldServ S/N: E6113602000
Configuration

# SW-IDENT. I/O
HW-REV. I/O V1.00.00
HW-IDENT. I/O 71104165
PROD-NO. I/O 0070294842
# SUB-I/O TYPE 1
# SW-REV. SUB-I/O
# SW-IDENT.SUB-I/O
# W-REV. SUB-I/O
# PROD-NO.SUB-I/O1
# SUB-I/O TYPE 2
# SW-REV. SUB-I/O
# SW-IDENT.SUB-I/O
# HW-REV. SUB-I/OH
# PROD-NO.SUB-I/O2

IN-SITU CALIB.

OPERATION MODE OFF

SERV.&ANALYSIS 1

# AUTO.PREAMP.UPD.
# SENS. CONNECTION
# SENSOR DIAGN.
# DELTA T °C (CELSIUS)

SERV.&ANALYSIS 2

16.07.2021 16:24:04
! = out of range
# = not read or communication error
* = parameter changed

8/14
 TAG: --------
t-mass 65
FieldServ S/N: E6113602000
Configuration

# EXT. FLOW CALIB. kg/h

# DEL. EXT. CALIB.

16.07.2021 16:24:04
! = out of range
# = not read or communication error
* = parameter changed

9/14
 TAG: --------
t-mass 65
FieldServ S/N: E6113602000
Process values

MEASURING VALUES

MASS FLOW 0.0000 kg/h

COR. VOLUME FLOW 0.0000 Nm³/h
HEAT FLOW 0.0000 kW
TEMPERATURE 32.1 °C (CELSIUS)

TOTALIZER 1

# SUM kg
# OVERFLOW E7 kg

HANDLING TOTAL.

# SUM INVENTORY kg
# OVERFL. INVENT. E7 kg

CURRENT OUTPUT 1

# ACTUAL CURRENT mA

PROCESSPARAMETER

# ZEROPOINT ADJUST

16.07.2021 16:24:04
! = out of range
# = not read or communication error
* = parameter changed

10/14
 TAG: --------
t-mass 65
FieldServ S/N: E6113602000
Process values

SUPERVISION

OPERATION HOURS 020566

# HRS. SINCE RESET

SERV.&ANALYSIS 1

# TX % %
# MIN T FLUID °C (CELSIUS)
# MAX T FLUID °C (CELSIUS)

SERV.&ANALYSIS 2

# DYN.VISCOSITY mPas
# SPEC. HEAT CAP. kJ/kgK
# TH. CONDUCTIVITY W/mK
# DENSITY kg/m³

16.07.2021 16:24:04
! = out of range
# = not read or communication error
* = parameter changed

11/14
 TAG: --------
t-mass 65
FieldServ S/N: E6113602000
Diagnostics

SUPERVISION

# ACTUAL SYS.COND
# PREV.SYS.COND 1
# PREV.SYS.COND 2
# PREV.SYS.COND 3
# PREV.SYS.COND 4
# PREV.SYS.COND 5
# PREV.SYS.COND 6
# PREV.SYS.COND 7
# PREV.SYS.COND 8
# PREV.SYS.COND 9
# PREV.SYS.COND 10
# PREV.SYS.COND 11
# PREV.SYS.COND 12
# PREV.SYS.COND 13
# PREV.SYS.COND 14
# PREV.SYS.COND 15
# PREV.SYS.COND 16

16.07.2021 16:24:04
! = out of range
# = not read or communication error
* = parameter changed

12/14
 TAG: --------
t-mass 65
FieldView S/N: E6113602000
FieldView

16.07.2021 16:24:04
! = out of range
# = not read or communication error
* = parameter changed

13/14
14/14