TUBE ANTENNAS

TRI-SECTOR

88 | April 2015
 TRIO
Series

TRIO
Three-Sector antennas
inside a small, low visual
impact cylindrical enclosure.
Discretely deployed as flag
poles, roof-top vents, street
lamps or telephone poles.

April 2015 | 89
 790-960 / 1710-2170 / 1710-2170 / 1710-2690 MHz

6890103
6890103A 6890103G
Quad Band | Tri-Sector Antenna | XXXX-Pol | 65° / 65° / 65° / 65° | 17.5 / 17.3 / 17.3 / 18.6 dBi | Variable Tilt

• Quad band, Tri-sector antenna, dual polarisation, 8 connectors per sector

• Independent tilt on each band 0-10° / 0-12° / 0-12° / 0-10° TRIO
• Independent azimuth panning ±15° on each sector Series
• MET and RET versions, AISG1.1 or 3GPP/AISG2.0

Presentation
The 6890103 is a Tri-Sector system that contains three Quad Band antennas installed at 120° in a cylindrical shroud with ±15° azimuth panning
capability independent on each sector. A service area at the bottom can be opened for access to connectors and the manual adjustment of
the electrical downtilt and azimuth panning. Variants can be delivered with only one or two sectors fitted. See below for ordering details.
Ordering Options Three Sectors Two Sectors One Sector
Manual Electrical Tilt 6890103 6890102 6890101
Remote Electrical Tilt AISG1.1 6890103A 6890102A 6890101A
Remote Electrical Tilt 3GPP/AISG2.0 6890103G 6890102G 6890101G
Access Ports Description (Connectors)
Each sector has 8 colour-coded connectors located at the bottom face.
RED Rings Extended Low Band 790-960 MHz Ports (2x) 7/16-DIN Female Long Neck
WHITE Rings Wide Band (Top Array) 1710-2170 MHz Ports (2x) 7/16-DIN Female Ultra Long Neck
BLUE Rings Wide Band (Bottom Array) 1710-2170 MHz Ports (2x) 7/16-DIN Female Ultra Long Neck
YELLOW Rings Ultra Wide Band 1710-2690 MHz Ports (2x) 7/16-DIN Female Long Neck
Electrical Characteristics Low Band (RED) Wide Band (BLUE) Ultra Wide Band (YELLOW)
Frequency Bands (MHz) 790...880...960 1710...1880 1900...2170 1710...1880 1900...2170 2500...2690
Tilt 0° 16.5...17.0...17.5 16.5...16.9 16.9...17.3 17.6...17.9 17.9...18.4 18.3...18.6
Gain (dBi) Tilt Mid Value 16.5...17.0...17.5 16.4...16.7 16.7...17.2 17.5...17.7 17.7...18.2 18.0...18.2
Tilt Max Value 16.4...16.9...17.4 16.3...16.5 16.5...17.0 17.5...17.6 17.6...18.0 17.7...17.8
Input Impedance 50Ω 50Ω 50Ω
VSWR < 1.5 < 1.5 < 1.5
Polarisation ±45° ±45° ±45°
Horizontal Beamwidth (-3 dB) 66° (±6°) 67° (±3°) 64° (±4°) 67° (±3°) 64° (±4°) 60° (±3°)
Vertical Beamwidth (-3 dB) 7.3° 7.2° 6.7° 5.5° 5.0° 4.0°
Electrical Downtilt Range 0-10° 0-12° 0-10°
> 30 dB,
> 30 dB > 30 dB
Intra Band Isolation > 28 dB from
> 28 dB from 0° to 2° tilt > 28 dB from 0° to 2° tilt
0° to 2° tilt
Isolation Between Bands > 30 dB > 30 dB > 30 dB
Upper Sidelobe Rejection
18 dB Typical 18 dB Typical 18 dB Typical
(20° sector above main beam)
Front-to-Back Ratio > 30 dB > 30 dB > 30 dB
Maximum Power (Per Port) 200 W 160 W 160 W
Intermodulation
< -110 dBm < -110 dBm < -110 dBm
3rd Order for 2x20W Carriers
Electrical Downtilt Control
Electrical downtilt for each band can be controlled separately. Tilt indicator(s) are covered by removable transparent cap(s).
Manual Electrical Tilt (MET) A coloured knob at the end of the tilt indicator allows change of the tilt without need of a tool. The knob colour
Control is identical to the corresponding connector ring colour. To access the knob, remove the cap by turning it counter-
clockwise. It is re-installed by opposite rotation. Do not remove the transparent cap(s) from the antenna.

Remote Electrical Tilt (RET) The remote control of the electrical tilt is managed by a Multi-Device Control Unit (MDCU) inserted in the bottom
Control of the antenna. A single actuator individually controls the tilt of each band (no need for daisy chain cables between
the bands). This module does not add any additional length to the antenna. For RET control, the transparent caps
must be in place and locked. The tilt angle indicators always remain visible and the antenna still has manual tilt
control (manual override).

RET Module Part Number MDCU-A0000 for AISG1.1 protocol (three units included in 6890103A)
(one per sector) MDCU-G0000 for 3GPP/AISG2.0 protocol (three units included in 6890103G)
Environmental
Operating Temperature Range -40° C to +60° C
Environmental ETS 300 019
RoHS Compliant Yes

Several patents pending regarding this product. Quoted performance parameters are provided to offer typical, peak or range values only and may vary as a result of normal testing, manufacturing and operational
conditions. Extreme operational conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to products may be made without notice.

90 | April 2015
 790-960 / 1710-2170 / 1710-2170 / 1710-2690 MHz

6890103
6890103A 6890103G
Quad Band | Tri-Sector Antenna | XXXX-Pol | 65° / 65° / 65° / 65° | 17.5 / 17.3 / 17.3 / 18.6 dBi | Variable Tilt

Mechanical Characteristics
Dimensions (Total Height x Diameter) 3108 x 573 mm (Total height includes 394 mm Service Area, Effective antenna height is 2676 mm)
Relative Directions of Internal Antennas (Sector Axis) 0° (±15°) 120° (±15°) 240° (±15°)
Weight Three Sectors: 190 kg Two Sectors: 153 kg One Sector: 116 kg
Shroud Outdoor Plastic, Grey RAL7035
Wind Speed Operational: 160 km/hr Survival: 200 km/h
Wind load at 160 km/h 1055 N

Bottom View of Antenna (View Inside Service Area) Dimensions (in mm)

Mounting Flange Interface

Six curved slots 18 mm wide

on a 500 mm diameter circle

TRIO Extension
A TRIO Extension is a short mounting (0.85 m) mast which has the same diameter,
same outside material and same colour as the antenna. The two major advantages
of the extensions are getting the antenna higher and housing our TMA.
Dimensions (Height x Diameter) 850 x 573 mm
Weight 66 kg
Shroud Outdoor Plastic, Grey RAL7035
Flange Galvanised Steel
Wind Speed Operational: 160 km/h Survival: 200 km/h
Refer to the separate documentation on TRIO Extensions for more details.

Several patents pending regarding this product. Quoted performance parameters are provided to offer typical, peak or range values only and may vary as a result of normal testing, manufacturing and operational
conditions. Extreme operational conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to products may be made without notice.

April 2015 | 91
 880-960 / 1710-2170 / 1710-2170 MHz

5880903
5880803 5880803G
Tri Band | Tri-Sector Antenna | XXX-Pol | 65° / 65° / 65° | 17.5 / 17.2 / 17.3 dBi | Variable Tilt

• Tri band, Tri-sector antenna, dual polarisation, 6 connectors per sector TRIO
• Independent tilt on each band 0-10° / 0-12° / 0-12° Series
• Independent azimuth panning ±15° on each sector
• MET and RET versions, AISG1.1 or 3GPP/AISG2.0

Presentation
The 5880903 is a Tri-Sector system that contains three Tri Band antennas installed at 120° in a cylindrical shroud with ±15° azimuth panning
capability independent on each sector. A service area at the bottom can be opened for access to connectors and the manual adjustment of
the electrical downtilt and azimuth panning. Variants can be delivered with only one or two sectors fitted. See below for ordering details.
Ordering Options Three Sectors Two Sectors One Sector
Manual Electrical Tilt 5880903 5880902 5880901
Remote Electrical Tilt AISG1.1 5880803 5880802 5880801
Remote Electrical Tilt 3GPP/AISG2.0 5880803G 5880802G 5880801G
Access Ports Description (Connectors)
Each sector has 6 colour-coded connectors located at the bottom face.

RED Rings Low Band 880-960 MHz Ports (2x) 7/16-DIN Female Long Neck

1710-2170 MHz Ports

WHITE Rings High Band (Top Array) (2x) 7/16-DIN Female Ultra Long Neck
Pattern optimised for DCS1800
1710-2170 MHz Ports
BLUE Rings High Band (Bottom Array) (2x) 7/16-DIN Female Long Neck
Pattern optimised for UMTS2100
Electrical Characteristics Low Band (RED) High Band (WHITE) High Band (BLUE)
Frequency Bands (MHz) 880...960 1710...1880 1900...2170 1710...1880 1900...2170
Tilt 0° 17.0...17.5 dBi 16.5...16.7 16.7...17.2 16.5...16.9 16.9...17.3
Gain (dBi) Tilt Mid Value 17.0...17.5 dBi 16.3...16.5 16.5...17.0 16.4...16.7 16.7...17.2
Tilt Max Value 16.9...17.4 dBi 16.0...16.3 16.3...16.5 16.3...16.5 16.5...17.0
Input Impedance 50Ω 50Ω 50Ω
VSWR < 1.5 < 1.5 < 1.5
Polarisation ±45° ±45° ±45°
Horizontal Beamwidth (-3 dB) 65° 65° 62° 65° 62°
Vertical Beamwidth (-3 dB) 7° 7° 7° 7° 7°
Electrical Downtilt Range 0-10° 0-12° 0-12°
Isolation Between Ports > 30 dB > 30 dB > 30 dB
Isolation Between Bands 45 dB Typical 45 dB Typical 45 dB Typical
Upper Sidelobe Rejection
18 dB Typical 18 dB Typical 18 dB Typical
(20° sector above main beam)
Front-to-Back Ratio > 30 dB > 30 dB > 30 dB
Maximum Power (Per Port) 200 W 160 W 160 W
Intermodulation
< -110 dBm < -110 dBm < -110 dBm
3rd Order for 2x20W Carriers
Electrical Downtilt Control
Electrical downtilt for each band can be controlled separately. Tilt indicator(s) are covered by removable transparent cap(s).
Manual Electrical Tilt (MET) A coloured knob at the end of the tilt indicator allows change of the tilt without need of a tool. The knob colour
Control is identical to the corresponding connector ring colour. To access the knob, remove the cap by turning it counter-
clockwise. It is re-installed by opposite rotation. Do not remove the transparent cap(s) from the antenna.

Remote Electrical Tilt (RET) The remote control of the electrical tilt is managed by a Multi-Device Control Unit (MDCU) inserted in the bottom
Control of the antenna. A single actuator individually controls the tilt of each band (no need for daisy chain cables between
the bands). This module does not add any additional length to the antenna. For RET control, the transparent caps
must be in place and locked. The tilt angle indicators always remain visible and the antenna still has manual tilt
control (manual override).

RET Module Part Number MDCU-A0000 for AISG1.1 protocol (three units included in 5880803)
(one per sector) MDCU-G0000 for 3GPP/AISG2.0 protocol (three units included in 5880803G)
Environmental
Operating Temperature Range -40° C to +60° C
Environmental ETS 300 019
RoHS Compliant Yes

Several patents pending regarding this product. Quoted performance parameters are provided to offer typical, peak or range values only and may vary as a result of normal testing, manufacturing and operational
conditions. Extreme operational conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to products may be made without notice.

92 | April 2015
 880-960 / 1710-2170 / 1710-2170 MHz

5880903
5880803 5880803G
Tri Band | Tri-Sector Antenna | XXX-Pol | 65° / 65° / 65° | 17.5 / 17.2 / 17.3 dBi | Variable Tilt

Mechanical Characteristics
Dimensions (Total Height x Diameter) 3069 x 388 mm (Total height includes 394 mm Service Area, Effective antenna height is 2676 mm)
Relative Directions of Internal Antennas (Sector Axis) 0° (±15°) 120° (±15°) 240° (±15°)
Weight Three Sectors: 98 kg Two Sectors: 86 kg One Sector: 74 kg
Shroud Outdoor Plastic, Grey RAL7035
Wind Speed Operational: 160 km/hr Survival: 200 km/h
Wind load at 160 km/h 709 N

Bottom View of Antenna (View Inside Service Area) Dimensions (in mm)

Mounting Flange Interface

Six curved slots 11.5 mm wide

on a 260 mm diameter circle

TRIO Extension
A TRIO Extension is a short mounting (0.85 m) mast which has the same diameter,
same outside material and same colour as the antenna. The two major advantages
of the extensions are getting the antenna higher and housing our TMA.
Dimensions (Height x Diameter) 850 x 388 mm
Weight 41.5 kg
Shroud Outdoor Plastic, Grey RAL7035
Flange Galvanised Steel
Wind Speed Operational: 160 km/h Survival: 200 km/h
Refer to the separate documentation on TRIO Extensions for more details.

Several patents pending regarding this product. Quoted performance parameters are provided to offer typical, peak or range values only and may vary as a result of normal testing, manufacturing and operational
conditions. Extreme operational conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to products may be made without notice.

April 2015 | 93
 698-960 / 1695-2690 / 1695-2180 / 2490-2690 MHz

6888303
6888303A 6888303G
Quad Band | Tri-Sector Antenna | XXXX-Pol | 65° / 65° / 65° / 65° | 16.5 / 18.5 / 17.5 / 18.0 dBi | Variable Tilt

• Quad band, Tri-Sector antenna, dual polarisation, 8 connectors per sector

• Independent tilt on each band 0-10° / 0-10° / 0-10° / 0-10° TRIO
• Independent azimuth panning ±15° on each sector Series
• MET and RET versions, AISG1.1 or 3GPP/AISG2.0

Presentation
The 6888303 is a Tri-Sector system that contains three Quad Band antennas installed at 120° in a cylindrical shroud with ±15° azimuth panning
capability independent on each sector. A service area at the bottom can be opened for access to connectors and the manual adjustment of
the electrical downtilt and azimuth panning. Variants can be delivered with only one or two sectors fitted. See below for ordering details.

Ordering Options Three Sectors Two Sectors One Sector

Manual Electrical Tilt 6888303 6888302 6888301
Remote Electrical Tilt AISG1.1 6888303A 6888302A 6888301A
Remote Electrical Tilt 3GPP/AISG2.0 6888303G 6888302G 6888301G
Access Ports Description (Connectors)
Each sector has 8 colour-coded connectors located at the bottom face.
R1 Ultra Low Band 698-960 MHz Ports (2x) 7/16-DIN Female Long Neck
Y1 Ultra Wide Band 1695-2690 MHz Ports (2x) 7/16-DIN Female Ultra Long Neck
B1 Wide Band 1695-2180 MHz Ports (2x) 7/16-DIN Female Ultra Long Neck
Y2 2600 2490-2690 MHz Ports (2x) 7/16-DIN Female Long Neck
Electrical Characteristics R1 Y1 B1 Y2
Frequency Bands (MHz) 700 800 900 1800 2100 2600 1800 2100 2600
Tilt 0° 14.5 15.5 16.4 17.7 18.1 18.5 17.4 17.7 18.0
Gain (dBi) Tilt 5° 14.5 15.4 16.3 17.7 18.1 18.5 17.4 17.7 18.0
Tilt 10° 14.2 15.1 16.0 17.7 18.0 18.2 17.4 17.6 17.7
Input Impedance 50Ω 50Ω 50Ω 50Ω
VSWR < 1.5 < 1.5 < 1.5 < 1.5
Polarisation ±45° ±45° ±45° ±45°
Horizontal Beamwidth (-3 dB) 73° 65° 65° 65° 63° 61° 65° 63° 61°
Vertical Beamwidth (-3 dB) 12° 10° 9.4° 6.1° 5.3° 4.2° 6.1° 5.3° 4.2°
Electrical Downtilt Range 0-10° 0-10° 0-10° 0-10°
> 30 dB > 30 dB,
> 30 dB > 30 dB
Inter/Intra Band Isolation > 28 dB from > 28 dB from
> 28 dB from 0° to 2° tilt > 28 dB from 0° to 2° tilt
0° to 2° tilt 0° to 2° tilt
Upper Sidelobe Rejection 18 dB
18 dB Typical 18 dB Typical 18 dB Typical
(20° sector above main beam) Typical
Front-to-Back @ 180° > 30 dB > 30 dB > 30 dB > 30 dB
Ratio @ 180° ±30° > 25 dB > 25 dB > 25 dB > 25 dB
Maximum Power (Per Port) 250 W 200 W 200 W 200 W
Intermodulation < -110
< -110 dBm < -110 dBm < -110 dBm
3rd Order for 2x20W Carriers dBm
Electrical Downtilt Control
Electrical downtilt for each band can be controlled separately. Tilt indicator(s) are covered by removable transparent cap(s).

Manual Electrical Tilt (MET) A coloured knob at the end of the tilt indicator allows change of the tilt without need of a tool. The knob colour
Control is identical to the corresponding connector ring colour. To access the knob, remove the cap by turning it counter-
clockwise. It is re-installed by opposite rotation. Do not remove the transparent cap(s) from the antenna.

Remote Electrical Tilt (RET) The remote control of the electrical tilt is managed by a Multi-Device Control Unit (MDCU) inserted in the bottom
Control of the antenna. A single actuator individually controls the tilt of each band (no need for daisy chain cables between
the bands). This module does not add any additional length to the antenna. For RET control, the transparent caps
must be in place and locked. The tilt angle indicators always remain visible and the antenna still has manual tilt
control (manual override).

RET Module Part Number MDCU-A0000 for AISG1.1 protocol (three units included in 6888303A)
(one per sector) MDCU-G0000 for 3GPP/AISG2.0 protocol (three units included in 6888303G)
Environmental
Operating Temperature Range -40° C to +60° C
Environmental ETS 300 019
RoHS Compliant Yes

Several patents pending regarding this product. Quoted performance parameters are provided to offer typical, peak or range values only and may vary as a result of normal testing, manufacturing and operational
conditions. Extreme operational conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to products may be made without notice.

94 | April 2015
 698-960 / 1695-2690 / 1695-2180 / 2490-2690 MHz

6888303
6888303A 6888303G
Quad Band | Tri-Sector Antenna | XXXX-Pol | 65° / 65° / 65° / 65° | 16.5 / 18.5 / 17.5 / 18.0 dBi | Variable Tilt

Mechanical Characteristics
Dimensions (Total Height x Diameter) 2325 x 573 mm (Total height includes 394 mm Service Area)
Relative Directions of Internal Antennas (Sector Axis) 0° (±15°) 120° (±15°) 240° (±15°)
Weight Three Sectors: 131 kg Two Sectors: 104 kg One Sector: 77 kg
Shroud Outdoor Plastic, Grey RAL7035
Wind Speed Operational: 160 km/hr Survival: 200 km/h
Wind load at 160 km/h 790 N

Bottom View of Antenna (View Inside Service Area) Dimensions (in mm)

Mounting Flange Interface

Six curved slots 18 mm wide

on a 500 mm diameter circle

TRIO Extension
A TRIO Extension is a short mounting (0.85 m) mast which has the same diameter,
same outside material and same colour as the antenna. The two major advantages
of the extensions are getting the antenna higher and housing our TMA.
Dimensions (Height x Diameter) 850 x 573 mm
Weight 66 kg
Shroud Outdoor Plastic, Grey RAL7035
Flange Galvanised Steel
Wind Speed Operational: 160 km/h Survival: 200 km/h
Refer to the separate documentation on TRIO Extensions for more details.

Several patents pending regarding this product. Quoted performance parameters are provided to offer typical, peak or range values only and may vary as a result of normal testing, manufacturing and operational
conditions. Extreme operational conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to products may be made without notice.

April 2015 | 95
 790-960 / 1710-2170 / 1710-2690 MHz

6878203
6878203A 6878203G
Tri Band | Tri-Sector Antenna | XXX-Pol | 65° / 65° / 65° | 16.5 / 18.6 / 18.6 dBi | Variable Tilt

• Tri band, Tri-sector antenna, dual polarisation, 6 connectors per sector TRIO
• Independent tilt on each band 0-10° / 0-10° / 0-10° Series
• Independent azimuth panning ±15° on each sector
• MET and RET versions, AISG1.1 or 3GPP/AISG2.0

Presentation
The 6878203 is a Tri-Sector system that contains three Tri Band antennas installed at 120° in a cylindrical shroud with ±15° azimuth panning
capability independent on each sector. A service area at the bottom can be opened for access to connectors and the manual adjustment of
the electrical downtilt and azimuth panning. Variants can be delivered with only one or two sectors fitted. See below for ordering details.
Ordering Options Three Sectors Two Sectors One Sector
Manual Electrical Tilt 6878203 6878202 6878201
Remote Electrical Tilt AISG1.1 6878203A 6878202A 6878201A
Remote Electrical Tilt 3GPP/AISG2.0 6878203G 6878202G 6878201G
Access Ports Description (Connectors)
Each sector has 6 colour-coded connectors located at the bottom face.
RED Rings Extended Low Band 790-960 MHz Ports (2x) 7/16-DIN Female Long Neck
BLUE Rings Wide Band 1710-2170 MHz Ports (2x) 7/16-DIN Female Ultra Long Neck
YELLOW Rings Ultra Wide Band 1710-2690 MHz Ports (2x) 7/16-DIN Female Ultra Long Neck
Electrical Characteristics Low Band (RED) Wide Band (BLUE) Ultra Wide Band (YELLOW)
Frequency Bands (MHz) 790...880...960 1710...1880 1900...2170 1710...1880 1900...2170 2500...2690
Tilt 0° 15.5...16.0...16.5 17.8...18.2 18.2...18.6 17.6...17.9 17.9...18.4 18.3...18.6
Gain (dBi) Tilt 5° 15.5...16.0...16.5 17.7...18.0 18.0...18.5 17.5...17.7 17.7...18.2 18.0...18.2
Tilt 10° 15.4...15.9...16.4 17.6...17.8 17.8...18.3 17.5...17.6 17.9...18.0 17.7...17.8
Input Impedance 50Ω 50Ω 50Ω
VSWR < 1.5 < 1.5 < 1.5
Polarisation ±45° ±45° ±45°
Horizontal Beamwidth (-3 dB) 66° (±6°) 67° (±3°) 64° (±4°) 67° (±3°) 64° (±4°) 60° (±3°)
Vertical Beamwidth (-3 dB) 9.0° 5.7° 4.9° 5.5° 5.0° 4.0°
Electrical Downtilt Range 0-10° 0-10° 0-10°
> 30 dB,
Intra Band Isolation > 28 dB from > 30 dB, > 28 dB from 0° to 2° tilt > 30 dB, > 28 dB from 0° to 2° tilt
0° to 2° tilt
Isolation Between Bands 45 dB Typical 45 dB Typical 45 dB Typical
Upper Sidelobe Rejection
18 dB Typical 18 dB Typical 18 dB Typical
(20° sector above main beam)
Front-to-Back Ratio > 30 dB > 30 dB > 30 dB
Maximum Power (Per Port) 200 W 160 W 160 W
Intermodulation
< -110 dBm < -110 dBm < -110 dBm
3rd Order for 2x20W Carriers
Electrical Downtilt Control
Electrical downtilt for each band can be controlled separately. Tilt indicator(s) are covered by removable transparent cap(s).
Manual Electrical Tilt (MET) A coloured knob at the end of the tilt indicator allows change of the tilt without need of a tool. The knob colour
Control is identical to the corresponding connector ring colour. To access the knob, remove the cap by turning it counter-
clockwise. It is re-installed by opposite rotation. Do not remove the transparent cap(s) from the antenna.

Remote Electrical Tilt (RET) The remote control of the electrical tilt is managed by a Multi-Device Control Unit (MDCU) inserted in the bottom
Control of the antenna. A single actuator individually controls the tilt of each band (no need for daisy chain cables between
the bands). This module does not add any additional length to the antenna. For RET control, the transparent caps
must be in place and locked. The tilt angle indicators always remain visible and the antenna still has manual tilt
control (manual override).

RET Module Part Number MDCU-A0000 for AISG1.1 protocol (three units included in 6878203A)
(one per sector) MDCU-G0000 for 3GPP/AISG2.0 protocol (three units included in 6878203G)
Environmental
Operating Temperature Range -40° C to +60° C
Environmental ETS 300 019
RoHS Compliant Yes

Several patents pending regarding this product. Quoted performance parameters are provided to offer typical, peak or range values only and may vary as a result of normal testing, manufacturing and operational
conditions. Extreme operational conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to products may be made without notice.

96 | April 2015
 790-960 / 1710-2170 / 1710-2690 MHz

6878203
6878203A 6878203G
Tri Band | Tri-Sector Antenna | XXX-Pol | 65° / 65° / 65° | 16.5 / 18.6 / 18.6 dBi | Variable Tilt

Mechanical Characteristics
Dimensions (Total Height x Diameter) 2325 x 573 mm (Total height includes 394 mm Service Area)
Relative Directions of Internal Antennas (Sector Axis) 0° (±15°) 120° (±15°) 240° (±15°)
Weight Three Sectors: 140 kg Two Sectors: 110 kg One Sector: 80 kg
Shroud Outdoor Plastic, Grey RAL7035
Wind Speed Operational: 160 km/hr Survival: 200 km/h
Wind load at 160 km/h 790 N

Bottom View of Antenna (View Inside Service Area) Dimensions (in mm)

Mounting Flange Interface

Six curved slots 18 mm wide

on a 500 mm diameter circle

TRIO Extension
A TRIO Extension is a short mounting (0.85 m) mast which has the same diameter,
same outside material and same colour as the antenna. The two major advantages
of the extensions are getting the antenna higher and housing our TMA.
Dimensions (Height x Diameter) 850 x 573 mm
Weight 66 kg
Shroud Outdoor Plastic, Grey RAL7035
Flange Galvanised Steel
Wind Speed Operational: 160 km/h Survival: 200 km/h
Refer to the separate documentation on TRIO Extensions for more details.

Several patents pending regarding this product. Quoted performance parameters are provided to offer typical, peak or range values only and may vary as a result of normal testing, manufacturing and operational
conditions. Extreme operational conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to products may be made without notice.

April 2015 | 97
 880-960 / 1710-2170 MHz

5863903
5863803 5863803G
Dual Band | Tri-Sector Antenna | XX-Pol | 65° / 65° | 16.5 / 18.0 dBi | Variable Tilt

• Dual band, Tri-sector antenna, dual polarisation, 4 connectors per sector

TRIO
• Independent tilt on each band 0-10° / 0-10°
Series
• Independent azimuth panning ±15° on each sector
• MET and RET versions, AISG1.1 or 3GPP/AISG2.0

Presentation
The 5863903 is a Tri-Sector system that contains three Dual Band antennas installed at 120° in a cylindrical shroud with ±15° azimuth panning
capability independent on each sector. A service area at the bottom can be opened for access to connectors and the manual adjustment of
the electrical downtilt and azimuth panning. Variants can be delivered with only one or two sectors fitted. See below for ordering details.
Ordering Options Three Sectors Two Sectors One Sector
Manual Electrical Tilt 5863903 5863902 5863901
Remote Electrical Tilt AISG1.1 5863803 5863802 5863801
Remote Electrical Tilt 3GPP/AISG2.0 5863803G 5863802G 5863801G
Access Ports Description (Connectors)
Each sector has 4 colour-coded connectors located at the bottom face.

RED Rings Low Band 880-960 MHz Ports (2x) 7/16-DIN Female Long Neck

BLUE Rings High Band 1710-2170 MHz Ports (2x) 7/16-DIN Female Long Neck

Electrical Characteristics Low Band (RED) High Band (BLUE)

Frequency Bands (MHz) 880...960 1710...1880 1900...2170
Tilt 0° 16.0...16.5 17.3...17.6 17.6...18.1
Gain (dBi) Tilt 5° 16.0...16.5 17.2...17.4 17.4...17.9
Tilt 10° 15.9...16.4 16.2...17.3 17.3...17.7
Input Impedance 50Ω 50Ω
VSWR < 1.5 < 1.5
Polarisation ±45° ±45°
Horizontal Beamwidth (-3 dB) 65° 65° 64°
Vertical Beamwidth (-3 dB) 9° 6° 6°
Electrical Downtilt Range 0-10° 0-10°
Isolation Between Ports > 30 dB > 30 dB
Isolation Between Bands 45 dB Typical 45 dB Typical
Upper Sidelobe Rejection
18 dB Typical 18 dB Typical
(20° sector above main beam)
Front-to-Back Ratio > 30 dB > 30 dB
Maximum Power (Per Port) 200 W 160 W
Intermodulation
< -110 dBm < -110 dBm
3rd Order for 2x20W Carriers
Electrical Downtilt Control
Electrical downtilt for each band can be controlled separately. Tilt indicator(s) are covered by removable transparent cap(s).
Manual Electrical Tilt (MET) A coloured knob at the end of the tilt indicator allows change of the tilt without need of a tool. The knob colour
Control is identical to the corresponding connector ring colour. To access the knob, remove the cap by turning it counter-
clockwise. It is re-installed by opposite rotation. Do not remove the transparent cap(s) from the antenna.

Remote Electrical Tilt (RET) The remote control of the electrical tilt is managed by a Multi-Device Control Unit (MDCU) inserted in the bottom
Control of the antenna. A single actuator individually controls the tilt of each band (no need for daisy chain cables between
the bands). This module does not add any additional length to the antenna. For RET control, the transparent caps
must be in place and locked. The tilt angle indicators always remain visible and the antenna still has manual tilt
control (manual override).

RET Module Part Number MDCU-A0000 for AISG1.1 protocol (three units included in 5863803)
(one per sector) MDCU-G0000 for 3GPP/AISG2.0 protocol (three units included in 5863803G)
Environmental
Operating Temperature Range -40° C to +60° C
Environmental ETS 300 019
RoHS Compliant Yes

Several patents pending regarding this product. Quoted performance parameters are provided to offer typical, peak or range values only and may vary as a result of normal testing, manufacturing and operational
conditions. Extreme operational conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to products may be made without notice.

98 | April 2015
 880-960 / 1710-2170 MHz

5863903
5863803 5863803G
Tri Band | Tri-Sector Antenna | XXX-Pol | 65° / 65° / 65° | 17.5 / 17.2 / 17.3 dBi | Variable Tilt

Mechanical Characteristics
Dimensions (Total Height x Diameter) 2291 x 388 mm (Total height includes 394 mm Service Area, Effective antenna height is 1900 mm)
Relative Directions of Internal Antennas (Sector Axis) 0° (±15°) 120° (±15°) 240° (±15°)
Weight Three Sectors: 68 kg Two Sectors: 58 kg One Sector: 48 kg
Shroud Outdoor Plastic, Grey RAL7035
Wind Speed Operational: 160 km/hr Survival: 200 km/h
Wind load at 160 km/h 529 N

Bottom View of Antenna (View Inside Service Area) Dimensions (in mm)

Mounting Flange Interface

Six curved slots 11.5 mm wide

on a 260 mm diameter circle

TRIO Extension
A TRIO Extension is a short mounting (0.85 m) mast which has the same diameter,
same outside material and same colour as the antenna. The two major advantages
of the extensions are getting the antenna higher and housing our TMA.
Dimensions (Height x Diameter) 850 x 388 mm
Weight 41.5 kg
Shroud Outdoor Plastic, Grey RAL7035
Flange Galvanised Steel
Wind Speed Operational: 160 km/h Survival: 200 km/h
Refer to the separate documentation on TRIO Extensions for more details.

Several patents pending regarding this product. Quoted performance parameters are provided to offer typical, peak or range values only and may vary as a result of normal testing, manufacturing and operational
conditions. Extreme operational conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to products may be made without notice.

April 2015 | 99
 (2x) 1710-2690 MHz

6177103
6177103A 6177103G
Twin Band | Tri-Sector Antenna | (2x) X-Pol | 65° | 18.0 dBi | Variable Tilt

• Twin band, Tri-sector antenna, dual polarisation, 4 connectors per sector TRIO

y
• Independent tilt on each band 0-12° / 0-12° Series

ead
• Independent azimuth panning ±15° on each sector
LT

R
• MET and RET versions, AISG1.1 or 3GPP/AISG2.0
E 2600
Presentation

The 6177103 is a Tri-Sector system that contains three Twin Band antennas installed at 120° in a cylindrical shroud with ±15° azimuth panning
capability independent on each sector. A service area at the bottom can be opened for access to connectors and the manual adjustment of
the electrical downtilt and azimuth panning. Variants can be delivered with only one or two sectors fitted. See below for ordering details.

Ordering Options Three Sectors Two Sectors One Sector

Manual Electrical Tilt 6177103 6177102 6177101

Remote Electrical Tilt AISG1.1 6177103A 6177102A 6177101A

Remote Electrical Tilt 3GPP/AISG2.0 6177103G 6177102G 6177101G

Access Ports Description (Connectors)

Each sector has 4 colour-coded connectors located at the bottom face.

Y1 Ultra Wide Band 1710-2690 MHz Ports (2x) 7/16-DIN Female Ultra Long Neck

Y2 Ultra Wide Band 1710-2690 MHz Ports (2x) 7/16-DIN Female Ultra Long Neck

Electrical Characteristics
Frequency Bands (MHz) 1710...1880...2170...2690 MHz

Gain (dBi) 16.9...17.2...17.6...18.0 dBi

Input Impedance 50Ω

VSWR < 1.5

Polarisation ±45°

Horizontal Beamwidth (-3 dB) 65°

Vertical Beamwidth (-3 dB) 6°

Electrical Downtilt Range 0-12°

Intra Band Isolation > 25 dB

Upper Sidelobe Rejection

18 dB Typical
(20° sector above main beam)

Null Fill
< 18 dB Typical
(First Null Below Main Beam)

Front-to-Back Ratio > 30 dB

Maximum Power (Per Port) 160 W

Intermodulation
< -153 dBc
3rd Order for 2x20W Carriers

Electrical Downtilt Control

Electrical downtilt for each band can be controlled separately. Tilt indicator(s) are covered by removable transparent cap(s).

Manual Electrical Tilt (MET) A coloured knob at the end of the tilt indicator allows change of the tilt without need of a tool. The knob colour
Control is identical to the corresponding connector ring colour. To access the knob, remove the cap by turning it counter-
clockwise. It is re-installed by opposite rotation. Do not remove the transparent cap(s) from the antenna.

Remote Electrical Tilt (RET) The remote control of the electrical tilt is managed by a Multi-Device Control Unit (MDCU) inserted in the bottom
Control of the antenna. A single actuator individually controls the tilt of each band (no need for daisy chain cables between
the bands). This module does not add any additional length to the antenna. For RET control, the transparent caps
must be in place and locked. The tilt angle indicators always remain visible and the antenna still has manual tilt
control (manual override).

RET Module Part Number MDCU-A0000 for AISG1.1 protocol (three units included in 6177103A)
(one per sector) MDCU-G0000 for 3GPP/AISG2.0 protocol (three units included in 6177103G)

Environmental
Operating Temperature Range -40° C to +60° C

Environmental ETS 300 019

RoHS Compliant Yes

Several patents pending regarding this product. Quoted performance parameters are provided to offer typical, peak or range values only and may vary as a result of normal testing, manufacturing and operational
conditions. Extreme operational conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to products may be made without notice.

100 | April 2015

 (2x) 1710-2690 MHz

6177103
6177103A 6177103G
Twin Band | Tri-Sector Antenna | (2x) X-Pol | 65° | 18.0 dBi | Variable Tilt

Mechanical Characteristics
Dimensions (Total Height x Diameter) 1927 x 573 mm (Total height includes 408 mm Service Area)
Relative Directions of Internal Antennas (Sector Axis) 0° (±15°) 120° (±15°) 240° (±15°)
Weight Three Sectors: 103 kg Two Sectors: 89 kg One Sector: 75 kg
Shroud Outdoor Plastic, Grey RAL7035
Wind Speed Operational: 160 km/hr Survival: 200 km/h

Wind load at 150 km/h 827 N

(EN1991-4-1) at 160 km/h 940 N

Bottom View of Antenna Dimensions (in mm)

V ie w In
side
View Outside Service Area

Se
rvi
c

e
Ar
ea

Mounting Flange Interface

Six curved slots 18 mm wide

on a 500 mm diameter circle

TRIO Extension
A TRIO Extension is a short mounting (0.85 m) mast which has the same diameter,
same outside material and same colour as the antenna. The two major advantages
of the extensions are getting the antenna higher and housing our TMA.
Dimensions (Height x Diameter) 850 x 573 mm
Weight 66 kg
Shroud Outdoor Plastic, Grey RAL7035
Flange Galvanised Steel
Wind Speed Operational: 160 km/h Survival: 200 km/h
Refer to the separate documentation on TRIO Extensions for more details.

Several patents pending regarding this product. Quoted performance parameters are provided to offer typical, peak or range values only and may vary as a result of normal testing, manufacturing and operational
conditions. Extreme operational conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to products may be made without notice.

April 2015 | 101