2020 Huawei Catalog
2020 Huawei Catalog
2020 Huawei Catalog
than 50 countries. In China, UK, Japan and South Korea, 5G services have already been rolled-out at a
large scale. More than 70 countries are scheduled to issue 5G licenses by 2021. In the next few years, 5G
network construction will be a top priority for global operators.
5G networks can provide 1000 times more capacity, and 10 to 100 times higher speed than 4G networks,
in order to deliver service features. The International Telecommunication Union (ITU) has explicit
specifications of up to 1 Gbps peak rate and ubiquitous 100 Mbps outdoor perceived rate for 5G
networks. As the 5G industry chain matures and enhanced mobile broadband (eMBB), massive machine-
type communications (mMTC), and ultra-reliable low-latency communication (URLLC) services are fully
rolled-out, 5G will be implemented on all bands through dynamic spectrum sharing.
During the early stage of 5G, the xGbps experience is primarily based on the high bandwidth of the C-
bands or 2.6 GHz with Massive MIMO technology, or through mmWave resources. Network coverage is
fulfilled using both LTE and NR based on E-UTRA-NR dual connectivity (EN-DC). Flexible sharing is
implemented between LTE and NR in both time and frequency domains.
5G must enable premium service experiences for individual users and digital transformations in industrial
applications, while allowing operators to tackle both business innovation and OPEX reduction.
Accumulated constructions involving 2G, 3G and 4G have made networks too complex to support all of
these requirements. Simplifying site deployment as well as network operation and maintenance (O&M) is
becoming inevitable for operators. This is required in order to be able to provide sufficient bandwidth and
low-latency capabilities for emerging services, and to support quick service launches, while reducing per-
bit construction and maintenance costs.
In 2020, we will see 5G deployed at an even larger scale. In line with this trend, the Huawei 1+1 antenna
reconstruction strategy enables efficient 5G Massive MIMO deployment:
1+1=2 1+1=1
Two poles scenario, space is enough to deploy One pole per sector, to deploy one antenna
two antennas per sector, One for Sub-3GHz all in supporting up to Sub-6GHz all in one.
one and another one for 5G Massive MIMO.
• Industry's highest integration, smallest dimensions. • Snake array 2.0 and adaptive feeding networks for ultra-
• Supports 2T4R and 4T4R on all sub-3GHz bands, and L-band wideband 4T6S from 1800 to 2600 MHz.
2x690-960/2x1427-2690/2x1695-2690/2x1427-2690/2x1695-2690 690-960/690-960/1427-2690/1427-2690/1695-2690/1695-2690
Width: 469mm Width: 499mm
• FDD 4T4R on all Sub-3GHz bands and 5G NR 8T8R are • Massive MIMO and passive antenna integration, enabling
• Multi-layer Interleaved Design reduces antenna width by • 2m length to support Massive MIMO and passive
50%, compared to traditional antennas. deployment on all Sub-6GHz bands in a single module.
• Shortens site acquisition duration, making site deployment
easier.
2x690-960/2x1427-2690/2x1695-2690/4x2300-3800/4x2300-3800 Active: TX/RX : 32T32R, Output Power: 200W, 200MHz Bandwidth @ C-Band
Passive: 2x690-960/2x1427-2690/2x1695-2690 MHz
Width: 499mm
Dimensions: 469x318mm@2m
Slim Design Overcomes Site Limits and Supports Flexible Evolution
2x690-960/2x1427-2690/2x1695-2690 690-960/4x1695-2690/4x3300-3800
Width: 369mm Width: 369mm
• Modular design for flexible configuration and smooth • Beam configurable, supporting 8T3S, 4T6S and 4T3S
evolution. deployment.
• Simplify site acquisition and protect investment. • Power sharing offsets uneven user distribution, while
retaining capacity performance.
• Reduce duplicate investments, bringing customers TCO
savings.
Antenna represents a core basic capability of radio access networks (RANs), and will continue to serve as
a key component in 5G networks. Huawei has been heavily investing in antenna research and
development. To date, Huawei has seven global antenna R&D centers, bringing together more than 400
experts and teams dedicated to active and passive antenna research. With more than 20 years of
experience in the RAN domain, Huawei has achieved a RAN-antenna coordinated design that can
significantly improve antenna performance. According to the 2019 ABI Research's analysis report,
Huawei's antenna technology innovation and implementation scored highest in the industry with 94.5
points, confirming the company's lead in the antenna industry.
Antenna innovation focuses on pursuing high integration and high performance, to support network
reconstruction and evolution. Huawei has developed many innovative solutions to deliver higher antenna
performance, as well as related manufacturing and quality control process to constantly enhance Passive
Intermodulation (PIM). Innovative Huawei technologies such as Enhanced Streamline, Dual Belt Line and
Golf Ball Effect improves wind load performance. Huawei has also persistently explored the fields of high
power and heat dissipation, represented by Cable Free 2.0 and the ceramic filters that have been applied
to BladeAAU products.
Contribution to Industry Development
Huawei is dedicated to promoting the development of the antenna industry. To date, Huawei
participates in more than 50 standardization related organizations, making continuous contributions to
industry coordination, alignment and standardization.
With the support of telecom operators, Huawei has successfully held the Global Antenna Technology
& Industry Forum in eight occasions. The forum has evolved to become the most influential platform
of the antenna industry, bringing together leading telecom operators, third-party organizations, tower
companies, industry organizations and media to jointly promote the development of antenna
technology.
Huawei co-leads and is a major contributor of the Next Generation Mobile Networks (NGMN)
Alliance, promoting MQ4 and MQ5 cluster connectors to become an industry standard. Huawei MQ4
and MQ5 cluster connectors have been selected by NGMN for early 5G NR deployment by this
alliance.
Huawei is a major participant and contributor of P-BASTA 11.1 and AISG 3.0 standards.
Huawei is the leader and a major contributor of BASTA AAS.
Huawei released the industry's first white paper on antenna industry trends in the 5G era in 2019.
Bl ade Ant enna
Blade Antenna is a revolutionary antenna design form. Blade antenna adopted modular design,
the upper module and lower module can be swapped separately. This kind of design can help
operators upgrade network more flexibly and protect investment.
Upper M odule
Blade Antenna
Lower M odule
Upper Module
The first module support 2 low bands
The following modules can support FDD \ TDD 8T8R, SDA
Lower Module
The first module support 2 low bands and 4 high bands
The following modules can support 3 low bands and 6 high
bands, FDD 8T8R in the future
A06240BA00v06
Exam ple: D -XXXXX - 690-960/ 1710-2690/ 1710-2690/ 1710-2690/ 1710-2690 -65/ 65/ 65/ 65/ 65-17i/ 18i/ 18i/ 17.5i/ 17.5i-M / M / M / M / M- B/ R
Diagram : X1 X2 X3 X4 X5 X6 X7
D Directional
O Omni-directional
C Cluster
X1 I Indoor
CP Camouflage Pipe
X X Polarization
V Vertical Polarization
X2
H Horizontal Polarization
C Circular Polarization
X5 Number Gain(dBi)
C Combiner Integrated
T TM A Integrated
R RCU Integrated
X7
AS Azimuth Steering
HE High Efficiency
** For antennas ith 14 or more ports, the same letters are represented in the “Number + Letter" ormat or the X2, X3, X4, and
X6 bits. For example, for the "X2" bit, "7X" indicates "XXXXXXX".
Ant enna Type Nam ing Rule: Type2
Exam ple: D - 06X - 2x690-960/ 4x1710-2690 - 2x65/ 4x65 - 2x15.5i/ 4x18i - 6xM - R
Diagram : X1 X2 X3 X4 X5 X6 X7
D Directional
O Omni-directional
C Cluster
X1 I Indoor
CP Camouflage Pipe
X X Polarization
V Vertical Polarization
X2
H Horizontal Polarization
C Circular Polarization
X5 Number Gain(dBi)
C Combiner Integrated
R RCU Integrated
AS Azimuth Steering
CF Cable Free
EM F EM F
TD Topology detection
Product M odel Nam ing Rule
Type2
A 06 240 P D 00 v06 N
Option: Reserved
Physical aspect
P: Panel Antenna
B: Blade Antenna
C: Camouflage Antenna
Port couple numbers distribution
0: pairs of port (≥3GHz)
4: pairs of port (1-3GHz)
2: pairs of port (≤1GHz)
Frequency characters
06: 6 pairs of port
A: Antenna products
Product M odel Nam ing Rule
RCU M odel Nam ing Exam ple: AIM M M odel Nam ing Exam ple:
A RCU 020 04 v01 A IM M 21 S 11 EB v01
TM A M odel Nam ing Exam ple: Com biner M odel Nam ing Exam ple:
A TA 26 20 00 v06 A COM D 2 H 11 v06
Colour coding is used to identify antenna RF ports and also for RET remote identification. Colour coding consists of
five parts generally: colour code, pattern coding, array numbering, array symbol and RCU serial number.
14-Port EasyRET antenna is used as an example to illustrate colour coding:
Type 1 Type 2
2 Low Bands Filt ered 2 Low Bands Filt ered
r2 r1: 690-862MHz rr r: 690-862MHz
y1 yL
r2: 880-960MHz rr: 880-960MHz
r1 and r2 share the same low-band array r and rr share the same low-band array
Type 1: Type 2:
HWxxx..........r1 HWxxx..........b2 HWxxx..........r HWxxx..........bbC
HWxxx..........r2 HWxxx..........b3 HWxxx..........rr HWxxx..........bbbR
HWxxx..........b1 HWxxx..........y2 HWxxx..........b HWxxx..........yyR
HWxxx..........y1 HWxxx..........yL
AISG Colour Coding
1. Colour Code
According to AISG, the upper band edge ranges of the antenna port are represented by red, green, blue, and yellow
in sequence from the low band range to the high band range. The following table shows the definition of the
frequency range and the associated colour code abbreviation.
Upper Band Edge Range Assigned Colour Code Colour Code Abbreviat ion
y1 y2 y3 y4 y5 y6
Type B:
Different segments of color and gaps are shown in the following figure.
Note: Gaps between colored segments may be white gaps or black lines.
For multi-band antennas, different arrays are indicated by their colour code abbreviations, array IDs, as well as array
positions. There are two types of array numbering.
Array ID: e.g. “y1” or “y” or the irst high-band array, ”y2” or ”yy” or the second high-band array.
AISG Colour Coding
Array position is represented by abbreviation (e.g. L, C, R, T, M, and B), the following table shows the details.
Array Horizont al Def init ion Array Vert ical Def init ion
Abbreviat ion Full Name Abbreviat ion Full Name
L Left Array T Top Array
C Center Array M Middle Array
R Right Array B Bottom Array
Take 14-port antenna for example, array with Ry2 or yyR means the second high-band array and located at right
position inside of antenna.
In order to better display the physical structure of Huawei antennas, the array symbol corresponding to the array ID
and array position is shown in the catalogue.
The following figures show the physical structures of different antennas as examples:
I. 4-Port Antenna
II. 4-Port Antenna
2 Filtered Low Bands ("Dipole reuse")
r1 r2 r rr 2 Filtered High Bands ("Dipole reuse")
e.g. 790-862/880-960 or b1 y1 b y
e.g. 1710-2170/2490-2690 MHz
690-803/824-960 MHz
IV.6-Port Antenna
1 Low Band
III.4-Port Antenna
2 Side-by-side High-band Arrays
2 Side-by-side High-band Arrays
y1 y2 yL yyR e.g. 790-960/ 1710-2690/ 1710- y1 y2 yL yyR
e.g. 1710-2690/1710-2690 MHz
2690 or 690-960/ 1710-
2690/ 1710-2690 M Hz
r1 r
r1 r r1 r
AISG Colour Coding
The SN (serial number) of integrated RCU contains colour coding information, EasyRET antennas support remote
RCU identification by colour coding.
The SN of an integrated RCU contains 19 digits. The following describes a hexa-band EasyRET antenna's SN as an
example:
Note: This naming convention is the mainstream scene. If you have any questions, please contact us.
Type 1: H W N 2 4 3 0 G 9 0 0 1 0 0 2 1 R y 2
Type 2: H W M 2 4 3 0 G 9 0 0 1 0 0 2 1 y y R
Color coding:
Use the last or last several
digit s to show the band
features and position of the
ant enna port. Fill other digits
that are not used wit h a
random code.
MMIK
MMIK000102 MMIK000103
ANT
APE4518R17v06 APE4518R17v07
AHP4518R4v06 AHP4518R4v07
AOC4518R5v06 AOC4518R6v06
TMA
ATADU2005v06 ATADU2024v06
ATADU2003v06 ATADU2023v06
Index of Ant enna and Ant enna Line Product
The products are listed in an alphabetical & numeric order. New or changed product.
ASBT…
ASBT00001v06 375
ASBT00002v06 375
Bracket
ASM …
ASMC00001 483
ASMC00002 483
ASMC00003 483
ASMC00004 484
ASMC00005 484
ASMC00006 498
ASMC00008 496
ASMC00009 499
ASMC00012 491
ASMC00013 492
ASMC00014 493
ASMC00015 494
ASMC00016 497
ASMC00017 495
ASMDT0A01 485
ASMDT0B01 486
ASMDT0C01 487
ASMDT0D01 488
ASMDT0F01 489
ASMDT0G01 490
ASMWM0001 500
Index of Ant enna Plat f orm
M odel Page
ACSR **ACSRSI4518R37v06 2
ACSR **ACSRSI4517R3v06 3
ACSM M M IK000103 5
AAU AAU5950 6
AAU AAU5951 8
** Preliminary Issue
ACSR ( Ant enna w it h Cabinet Suit e f or RRU)
ACSR(Antenna with Cabinet Suite for RRU) is an extensible antenna solution, which can be
integrated with Huawei RRU to realize passive antenna and RRU in one box. ACSR helps operators
to deploy sub 3GHz full 4T4R by one installation in one box to simply the site configuration and
reduce TCO.
ACSR RRU
AAU
65/ 65/ 65/ 65/ 65/ 65-14.5i/ 14.5i/ 17.5i/ 17.5i/ 17.5i/ 17.5i-M / M / M / M / M / M -R
EasyRET2L4H 12-Port Ant enna w it h Int egrat ed RCUs -1.5m
Notes: Only HUAWEI RRU supported. Contact technical support to get specific RRU type.
ACSRSI4517R3v06
AXXXXXX-690-960/ 690-960/ 1695-2690/ 1695-2690/ 1695-2690/ 1695-2690-
65/ 65/ 65/ 65/ 65/ 65-16i/ 16i/ 16.5i/ 16.5i/ 16.5i/ 16.5i-M / M / M / M / M / M -R
EasyRET 2L4H 12-Port Ant enna w it h Int egrat ed RCUs - 2.0m
Notes: Only HUAWEI RRU supported. Contact technical support to get specific RRU type.
ACSM ( Ant enna w it h Cabinet Suit e f or M assive M IM O)
AAU
Product Descript ion
ACSM which includes passive antenna and MMIK(Massive MIMO Mechanical Integration Kit) is a
solution to integrate passive antenna and Massive MIMO.
With ACSM, operators can deploy passive antenna and Massive MIMO on single pole as one box,
or reserve space for future Massive MIMO deployment, to reduce site cost and shorten TTM.
Massive
M IMO
Passive
MMIK (Massive MIMO Mechanical Integration Kit) Antenna
Flip cover design for easy installation and
maintenance of Massive MIMO.
Fit Huawei passive antennas with 469mm width.
ACSM
M M IK000103
L4
Inst allat ion Lim it at ion
M echanical tilt (°) 0
Outlet of Huawei antenna (W x D) (mm) 469 x 206
M aximum length of M assive M IM O (L1) (mm) 850 L2
M aximum width of M assive M IM O (mm) 430
365 (Antenna with Clamps kit -F, fit for
M aximum depth allowed from M assive M IM O ASM DT0F01)
front to pole (D1) (mm) 325 (Antenna with Clamps Kit -D, fit for
ASM DT0D01)
L3
395 (Antenna with Clamps kit -F, fit for
ASM DT0F01)
Depth from M IK front to pole (D2) (mm)
360 (Antenna with Clamps Kit -D, fit for
ASM DT0D01)
M inimum length of pole (L2) (mm) L3 + 1200
M inimum operation spacing from
antenna top to M assive M IM O bottom (L4) 100
(mm)
100
AAU5950
AAU
Product Descript ion
AAU5950
TX/ RX 4T4R
EIRP 4*61.3dBm
Dimensions (H x W x D) 1999mm(H)*429mm(W)*426mm(D)
Weight 79kg
Temperature - 40℃~55℃
AAU
Product Descript ion
AAU5951
TX/ RX 4T4R
EIRP 4*61.3dBm
Dimensions (H x W x D) 1999mm(H)*429mm(W)*426mm(D)
Weight 87kg
Temperature - 40℃~55℃
L Band &
H Band
M ult i-band
B - 1 Low Band
2 Port s
4 Port s
690-960/
690-960
65/ 65 14.5/ 14.5 0-14/ 0-14 EasyRET2.0 4 x 4.3-10 1499 x 429 x 196 ADU4515R5v06 20 E
690-960/
690-960
65/ 65 16/ 16 0-10/ 0-10 EasyRET2.0 4 x 4.3-10 1999 x 429 x 196 ADU4516R6v06 22 E
690-960/
690-960
65/ 65 17/ 17 0-10/ 0-10 EasyRET2.0 4 x 4.3-10 2550 x 429 x 196 ADU4517R6v06 24 E
** Preliminary Issue
M ult i-band
B - 1 Low Band
6 Port s
690-862/
15/ 15.5/ 0-10/ 0-10/
880-906/ 65/ 65/ 65
16 0-10
EasyRET2.0 6 x 4.3-10 1999 x 429 x 196 ATR4516R2v06 26 EE
690-960
690-862/
16.5/ 16.5/ 2-12/ 2-12/
880-906/ 65/ 65/ 65
17 2-12
EasyRET2.0 6 x 4.3-10 2550 x 429 x 196 ATR4517R10v06 28 EE
690-960
r r1 r2 r1 r2 r3
2 Low-bands array
side-by-side
L Band &
H Band
M ult i-band
B - 2 High Band
2 Port s
4 Port s
1710-2200/
1710-2200
65/ 65 18/ 18 0-10/ 0-10 EasyRET2.0 4 x 4.3-10 1365 x 269 x 86 ADU4518R1v06 38 H
1710-2690/
1710-2690
65/ 65 18/ 18 0-12/ 0-12 EasyRET2.0 4 x 4.3-10 1365 x 269 x 86 ADU4518R6v06 40 I
1695-2690/
1695-2690
65/ 65 21/ 21 0-6/ 0-6 EasyRET2.0 4 x 4.3-10 2099 x 269 x 86 ADU4521R0v06 42 I
1710-2690/
1710-2690
33/ 33 21/ 21 0-10/ 0-10 EasyRET2.0 4 x 4.3-10 1399 x 449 x 196 **ADU4521R3v06 44 I
6 Port s
1710-2690/
0-12/ 0-12/
1710-2690/ 65/ 65/ 65 18/ 18/ 18
0-12
EasyRET2.0 6 x 4.3-10 1365 x 376 x 99 ATR4518R14v06 46 P
1710-2690
** Preliminary Issue
M ult i-band
B - 2 High Band
8 Port s
1710-2690/
1710-2690/ 18/ 18/ 0-12/ 0-12/
1710-2690/
65/ 65/ 65/ 65
18/ 18 0-12/ 0-12
EasyRET2.0 8 x 4.3-10 1499 x 449 x 115 AQU4518R21v06 48 VV
1710-2690
** Preliminary Issue
2 High-bands 2 High-bands
array array
side-by-side side-by-side
A704515R0v06
DX-690-960-65-15i-M -R
EasyRET Low -Band 2-Port Ant enna w it h 1 Int egrat ed RCU - 1.4m
L Band &
H Band
Elect rical Propert ies
690 - 960
Frequency range (M Hz)
690 - 803 790 - 862 824 - 894 880 - 960
Polarization +45° , -45°
Electrical downtilt (°) 0 - 14 , continuously adjustable
at mid Tilt 13.9 14.4 14.6 14.8
Gain (dBi)
over all Tilts 13.9 ± 0.3 14.3 ± 0.3 14.5 ± 0.3 14.7 ± 0.4
Side lobe suppression for first side
> 15 > 15 > 15 > 17
lobe above main beam (dB)
Horizontal 3dB beam width (°) 69 ± 1.4 68 ± 1.0 67 ± 1.0 65 ± 2.0
Vertical 3dB beam width ( °) 16.4 ± 1.0 15.0 ± 1.0 14.5 ± 0.7 13.2 ± 0.9
VSWR < 1.5
Cross polar isolation (dB) ≥ 30
Front to back ratio , ± 30° (dB) > 24 > 25 > 25 > 25
Cross polar ratio (dB) 0° > 17 > 17 > 17 > 17
M ax. power per input (W) 500 (at 50℃ ambient temperature)
Intermodulation IM 3 (dBc) ≤ -153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC Ground
(87)
Antenna weight (kg) 12.3
Clamps weight (kg) 2.9 (2 units)
Antenna packing weight (kg) 21.3 (Included clamps)
M ast diameter supported (mm) 50 - 115
Radome material Fiberglass
Radome colour Light grey
Operational temperature ( ℃)
1415
1280
-40 .. +65
Frontal: 435 (at 150 km/ h)
Wind load (N) Lateral: 195 (at 150 km/ h)
M aximum: 580 (at 150 km/ h)
M ax. operational wind speed (km/ h) 200
Survival wind speed (km/ h) 250
Connector 2 x 4.3-10 Female
Connector position Bottom
Accessories
48
M echanical downtilt:
Downtilt kit ASM DT0B01 1.3 kg 1 (Separate packing)
0 - 16 °
A704515R0v06
DX-690-960-65-15i-M -R
EasyRET Low -Band 2-Port Ant enna w it h 1 Int egrat ed RCU - 1.4m
Propert ies
RET type Integrated RET
RET protocols* AISG 2.0 / 3GPP
Input voltage range (V) 10 - 30 DC
< 0.5 (when the motor does not work, 12 V)
Power consumption (W) < 3 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 30 (typically, depending on antenna type)
2 x 8 pin connector according to IEC 60130-9
RET connector
Daisy chain in: M ale / Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
DC n/ c RS-485B n/ c RS-485A DC DC return n/ c
2.5 (10/ 350 μs)
Lightning protection (kA)
10 (8/ 20 μs)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET
antenna software interface is switchable between AISG 2.0/ 3GPP and AISG 1.1 with a vendor defined command. For more details
about protocol switching function, contact Huawei before system installation.
St andards: EN/ IEC 60950-1(Safety), EN/ IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission),
EN/ IEC 62368-1(Safety),ETSI EN 301 489, FCC Part15, ICES-003
Cert if icat ion: CE, FCC, IC, RCM , RoHS, REACH, WEEE
HWxxxx…...r
r - Red r
L Band &
H Band
Elect rical Propert ies
690 - 960
Frequency range (M Hz)
690 - 803 790 - 862 824 - 894 880 - 960
Polarization +45° , -45°
Electrical downtilt (°) 0 - 12 , continuously adjustable
at mid Tilt 15.5 15.9 16.1 16.4
Gain (dBi)
over all Tilts 15.4 ± 0.3 15.7 ± 0.4 15.9 ± 0.5 16.1 ± 0.5
(588)
Antenna weight (kg) 15.3
Clamps weight (kg) 3.0 (2 units)
Antenna packing weight (kg) 25.8 (Included clamps)
M ast diameter supported (mm) 50 - 115
Radome material Fiberglass
Radome colour Light grey
Operational temperature (℃) -40 .. +65
1300
1936
Accessories
48
M echanical downtilt:
Downtilt kit ASM DT0C01 2.1 kg 1 (Separate packing)
0 - 12 °
A704516R0v06
DX-690-960-65-16.5i-M -R
EasyRET Low -Band 2-Port Ant enna w it h 1 Int egrat ed RCU - 2.0m
Propert ies
RET type Integrated RET
RET protocols* AISG 2.0 / 3GPP
Input voltage range (V) 10 - 30 DC
< 0.5 (when the motor does not work, 12 V)
Power consumption (W) < 3 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 30 (typically, depending on antenna type)
2 x 8 pin connector according to IEC 60130-9
RET connector
Daisy chain in: M ale / Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
DC n/ c RS-485B n/ c RS-485A DC DC return n/ c
2.5 (10/ 350 μs)
Lightning protection (kA)
10 (8/ 20 μs)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET
antenna software interface is switchable between AISG 2.0/ 3GPP and AISG 1.1 with a vendor defined command. For more details
about protocol switching function, contact Huawei before system installation.
St andards: EN/ IEC 60950-1(Safety), EN/ IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission),
EN/ IEC 62368-1(Safety),ETSI EN 301 489, FCC Part15, ICES-003
Cert if icat ion: CE, FCC, IC, RCM , RoHS, REACH, WEEE
HWxxxx…...r
r - Red r
L Band &
H Band
Elect rical Propert ies
690 - 960
Frequency range (M Hz)
690 - 803 790 - 862 824 - 894 880 - 960
Polarization +45° , -45°
Electrical downtilt (°) 0 - 10 , continuously adjustable
at mid Tilt 16.5 16.7 17.0 17.2
Gain (dBi)
over all Tilts 16.4 ± 0.3 16.6 ± 0.4 16.7 ± 0.4 16.9 ± 0.5
106
M echanical Propert ies
Antenna dimensions (H x W x D) (mm) 2535 x 298 x 149
Packing dimensions (H x W x D) (mm) 2910 x 375 x 200
(613)
Antenna weight (kg) 19.3
Clamps weight (kg) 3.0 (2 units)
Antenna packing weight (kg) 27.0 (Included clamps)
M ast diameter supported (mm) 50 - 115
Radome material Fiberglass
Radome colour Light grey
1874
Accessories
It em M odel Descript ion Weight Unit s per ant enna
M echanical downtilt:
Downtilt kit ASM DT0C01 2.1 kg 1 (Separate packing)
0-8°
A704517R0v06
DX-690-960-65-17.5i-M -R
EasyRET Low -Band 2- Port Ant enna w it h 1 Int egrat ed RCU -
2.6m
Int egrat ed RET Specif icat ions
Propert ies
RET type Integrated RET
RET protocols* AISG 2.0 / 3GPP
Input voltage range (V) 10 - 30 DC
< 0.5 (when the motor does not work, 12 V)
Power consumption (W) < 3 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 30 (typically, depending on antenna type)
2 x 8 pin connector according to IEC 60130-9
RET connector
Daisy chain in: M ale / Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
DC n/ c RS-485B n/ c RS-485A DC DC return n/ c
2.5 (10/ 350 μs)
Lightning protection (kA)
10 (8/ 20 μs)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET
antenna software interface is switchable between AISG 2.0/ 3GPP and AISG 1.1 with a vendor defined command. For more details
about protocol switching function, contact Huawei before system installation.
St andards: EN/ IEC 60950-1(Safety), EN/ IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission),
EN/ IEC 62368-1(Safety),ETSI EN 301 489, FCC Part15, ICES-003
Cert if icat ion: CE, FCC, IC, RCM , RoHS, REACH, WEEE
HWxxxx…...r
r
r - Red
L Band &
H Band
Elect rical Propert ies
690 - 960
Frequency range (M Hz)
690 - 803 790 - 862 824 - 894 880 - 960
Polarization +45° , -45°
Electrical downtilt (°) 0 - 10 , continuously adjustable
at mid Tilt 19.1 19.7 20.0 20.3
Gain (dBi)
over all Tilts 19.0 ± 0.5 19.6 ± 0.4 19.9 ± 0.5 20.2 ± 0.3
Side lobe suppression for first
> 19 > 21 > 21 > 19
side lobe above main beam (dB)
Azimuth side lobe
> 18 > 18 > 19 > 19
suppression(dB)
Horizontal 3dB beam width ( °) 35 ± 1.5 32.5 ± 1.0 31.5 ± 1.5 29 ± 1.0
Vertical 3dB beam width ( °) 8.8 ± 0.5 8.0 ± 0.5 7.7 ± 0.3 7.2 ± 0.5
VSWR < 1.5
Cross polar isolation (dB) ≥ 28 ≥ 30
Front to back ratio , ± 30°(dB) > 32 > 35 > 33 > 32
Cross polar ratio (dB) 0° > 21 > 28 > 26 > 24
M ax. power per input (W) 500 (at 50℃ ambient temperature)
Intermodulation IM 3 (dBc) ≤ -153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC Ground
1. Values based on NGM N recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XM L format is available.
(599)
Antenna weight (kg) 44.8
Clamps weight (kg) 5.8 (2 units)
Antenna packing weight (kg) 64.2 (Included clamps)
M ast diameter supported (mm) 50 - 115
Radome material Fiberglass
Radome colour Light grey
1888
Accessories
Item Model Description Weight Units per antenna
Mechanical downtilt:
Downtilt kit ASMDT0F01 3.1 kg 1 (Separate packing)
0-8°
A704521R0v06
DX-690-960-33-20.5i-M -R
EasyRET Low -Band 2-Port Ant enna w it h 1 Int egrat ed RCU - 2.6m
Propert ies
RET type Integrated RET
RET protocols* AISG 2.0 / 3GPP
Input voltage range (V) 10 - 30 DC
< 0.5 (when the motor does not work, 12 V)
Power consumption (W) < 3 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 30 (typically, depending on antenna type)
2 x 8 pin connector according to IEC 60130-9
RET connector
Daisy chain in: M ale / Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
DC n/ c RS-485B n/ c RS-485A DC DC return n/ c
2.5 (10/ 350 μs)
Lightning protection (kA)
10 (8/ 20 μs)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET
antenna software interface is switchable between AISG 2.0/ 3GPP and AISG 1.1 with a vendor defined command. For more details
about protocol switching function, contact Huawei before system installation.
St andards: EN/ IEC 60950-1(Safety), EN/ IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission),
EN/ IEC 62368-1(Safety),ETSI EN 301 489, FCC Part15, ICES-003
Cert if icat ion: CE, FCC, IC, RCM , RoHS, REACH, WEEE
HWxxxx…...r
r
r - Red
L Band &
H Band
Elect rical Propert ies
790 - 960
Frequency range (M Hz)
790 - 862 824 - 894 880 - 960
Polarization +45° , -45°
Electrical downtilt (° ) 0 - 12 , continuously adjustable
at mid Tilt 15.0 15.2 15.3
Gain (dBi)
over all Tilts 14.8 ± 0.3 15.0 ± 0.3 15.0 ± 0.4
(604)
Packing dimensions (H x W x D) (mm) 2255 x 305 x 190
Antenna weight (kg) 13.5
Clamps weight (kg) 3.0 (2 units)
Antenna packing weight (kg) 22.4 (Included clamps)
M ast diameter supported (mm) 50 - 115
1285
Accessories
47
Propert ies
RET type Integrated RET
RET protocols* AISG 2.0 / 3GPP
Input voltage range (V) 10 - 30 DC
< 0.5 (when the motor does not work, 12 V)
Power consumption (W) < 3 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 30 (typically, depending on antenna type)
2 x 8 pin connector according to IEC 60130-9
RET connector
Daisy chain in: M ale / Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
DC n/ c RS-485B n/ c RS-485A DC DC return n/ c
2.5 (10/ 350 μs)
Lightning protection (kA)
10 (8/ 20 μs)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET
antenna software interface is switchable between AISG 2.0/ 3GPP and AISG 1.1 with a vendor defined command. For more details
about protocol switching function, contact Huawei before system installation.
St andards: EN/ IEC 60950-1(Safety), EN/ IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission),
EN/ IEC 62368-1(Safety),ETSI EN 301 489, FCC Part15, ICES-003
Cert if icat ion: CE, FCC, IC, RCM , RoHS, REACH, WEEE
HWxxxx…...r
r
r - Red
L Band &
H Band
Elect rical Propert ies
2 x (690 - 960)
Frequency range (M Hz)
690 - 803 790 - 862 824 - 894 880 - 960
Polarization +45° , -45°
Electrical downtilt (°) 0 - 14 , continuously adjustable , each band separately
at mid Tilt 13.8 14.2 14.4 14.5
Gain (dBi)
over all Tilts 13.7 ± 0.5 14.1 ± 0.5 14.3 ± 0.5 14.4 ± 0.5
(66)
Antenna weight (kg) 22.4
Clamps weight (kg) 3.6 (2 units)
Antenna packing weight (kg) 33.8 (Included clamps)
M ast diameter supported (mm) 50 - 115
Radome material Fiberglass
Radome colour Light grey
1376
1499
Accessories
It em M odel Descript ion Weight Unit s per ant enna
M echanical downtilt:
Downtilt kit ASM DT0D01 2.1 kg 1 (Separate packing)
0 - 16 °
ADU4515R5v06
DXX-690-960/ 690-960-65/ 65-14.5i/ 14.5i-M / M -R
EasyRET 2L 4-Port Ant enna w it h 2 Int egrat ed RCUs - 1.4m
Propert ies
RET type Integrated RET
RET protocols* AISG 2.0 / 3GPP
Input voltage range (V) 10 - 30 DC
< 0.5 (when the motor does not work, 12 V)
Power consumption (W) < 3 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 30 (typically, depending on antenna type)
2 x 8 pin connector according to IEC 60130-9
RET connector
Daisy chain in: M ale / Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
DC n/ c RS-485B n/ c RS-485A DC DC return n/ c
2.5 (10/ 350 μs)
Lightning protection (kA)
10 (8/ 20 μs)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET
antenna software interface is switchable between AISG 2.0/ 3GPP and AISG 1.1 with a vendor defined command. For more
details about protocol switching function, contact Huawei before system installation.
St andards: EN/ IEC 60950-1(Safety), EN/ IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission),
EN/ IEC 62368-1(Safety),ETSI EN 301 489, FCC Part15, ICES-003
Cert if icat ion: CE, FCC, IC, RCM , RoHS, REACH, WEEE
HWxxxx……Lr1
HWxxxx……Rr2
Lr1 Rr2
r - Red
L - Left array R - Right
array
L Band &
H Band
Elect rical Propert ies
2 x (690 - 960)
Frequency range (M Hz)
690 - 803 790 - 862 824 - 894 880 - 960
Polarization +45° , -45°
Electrical downtilt (°) 0 - 10 , continuously adjustable , each band separately
at mid Tilt 15.0 15.5 15.8 16.0
Gain (dBi)
over all Tilts 14.8 ± 0.5 15.3 ± 0.5 15.6 ± 0.5 15.8 ± 0.5
Side lobe suppression for first
> 16 > 17 > 17 > 17
side lobe above main beam (dB)
Horizontal 3dB beam width ( °) 68 ± 5 65 ± 5 62 ± 5 60 ± 5
Vertical 3dB beam width ( °) 10.5 ± 0.9 9.5 ± 0.8 9.2 ± 0.7 8.5 ± 0.7
VSWR < 1.5
Cross polar isolation (dB) ≥ 28
Interband isolation (dB) ≥ 28
Front to back ratio , ± 30° (dB) > 23 > 24 > 25 > 26
Cross polar ratio (dB) 0° > 17 > 18 > 19 > 20
M ax. power per input (W) 400 (at 50℃ ambient temperature)
Intermodulation IM 3 (dBc) ≤ -153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC Ground
(669)
Packing dimensions (H x W x D) (mm) 2195 x 530 x 270
Antenna weight (kg) 28.2
Clamps weight (kg) 3.6 (2 units)
Antenna packing weight (kg) 38.0 (Included clamps)
M ast diameter supported (mm) 50 - 115
Radome material Fiberglass
Radome colour Light grey
1273
1999
Accessories
57
Propert ies
RET type Integrated RET
RET protocols* AISG 2.0 / 3GPP
Input voltage range (V) 10 - 30 DC
< 0.5 (when the motor does not work, 12 V)
Power consumption (W) < 3 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 30 (typically, depending on antenna type)
2 x 8 pin connector according to IEC 60130-9
RET connector
Daisy chain in: M ale / Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
DC n/ c RS-485B n/ c RS-485A DC DC return n/ c
2.5 (10/ 350 μs)
Lightning protection (kA)
10 (8/ 20 μs)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET
antenna software interface is switchable between AISG 2.0/ 3GPP and AISG 1.1 with a vendor defined command. For more
details about protocol switching function, contact Huawei before system installation.
St andards: EN/ IEC 60950-1(Safety), EN/ IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission),
EN/ IEC 62368-1(Safety),ETSI EN 301 489, FCC Part15, ICES-003
Cert if icat ion: CE, FCC, IC, RCM , RoHS, REACH, WEEE
HWxxxx……Lr1
HWxxxx……Rr2
Lr1 Rr2
r - Red
L - Left array R - Right
array
L Band &
H Band
Elect rical Propert ies
2 x (690 - 960)
Frequency range (M Hz)
690 - 803 790 - 862 824 - 894 880 - 960
Polarization +45° , -45°
Electrical downtilt (°) 0 - 10 , continuously adjustable , each band separately
at mid Tilt 15.8 16.4 16.7 17.2
Gain (dBi)
over all Tilts 15.5 ± 0.5 16.2 ± 0.5 16.4 ± 0.5 16.9 ± 0.5
Side lobe suppression for first
> 16 > 17 > 17 > 17
side lobe above main beam (dB)
Horizontal 3dB beam width ( °) 68 ± 5 65 ± 5 62 ± 5 60 ± 5
Vertical 3dB beam width ( °) 8.8 ± 0.7 8.0 ± 0.6 7.8 ± 0.5 7.5 ± 0.5
VSWR < 1.5
Cross polar isolation (dB) ≥ 28
Interband isolation (dB) ≥ 28
Front to back ratio , ± 30° (dB) > 23 > 24 > 25 > 26
Cross polar ratio (dB) 0° > 17 > 18 > 19 > 20
M ax. power per input (W) 400 (at 50℃ ambient temperature)
Intermodulation IM 3 (dBc) ≤ -153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC Ground
(706)
Packing dimensions (H x W x D) (mm) 2770 x 530 x 275
Antenna weight (kg) 33.4
Clamps weight (kg) 5.8 (2 units)
Antenna packing weight (kg) 55.0 (Included clamps)
M ast diameter supported (mm) 50 - 115
Radome material Fiberglass
Radome colour Light grey
2550
1787
Accessories
57
Propert ies
RET type Integrated RET
RET protocols* AISG 2.0 / 3GPP
Input voltage range (V) 10 - 30 DC
< 0.5 (when the motor does not work, 12 V)
Power consumption (W) < 3 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 30 (typically, depending on antenna type)
2 x 8 pin connector according to IEC 60130-9
RET connector
Daisy chain in: M ale / Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
DC n/ c RS-485B n/ c RS-485A DC DC return n/ c
2.5 (10/ 350 μs)
Lightning protection (kA)
10 (8/ 20 μs)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET
antenna software interface is switchable between AISG 2.0/ 3GPP and AISG 1.1 with a vendor defined command. For more
details about protocol switching function, contact Huawei before system installation.
St andards: EN/ IEC 60950-1(Safety), EN/ IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission),
EN/ IEC 62368-1(Safety),ETSI EN 301 489, FCC Part15, ICES-003
Cert if icat ion: CE, FCC, IC, RCM , RoHS, REACH, WEEE
HWxxxx……Lr1
HWxxxx……Rr2
Lr1 Rr2
r - Red
L - Left array R - Right
array
L Band &
H Band
Elect rical Propert ies
690 - 862 (Lr1) 880 - 960 690 - 960 (Rr3)
Frequency range (M Hz)
690 - 803 790 - 862 (Lr2) 690 - 803 790 - 862 824 - 894 880 - 960
Polarization +45° , -45° +45° , -45°
Electrical downtilt (°) 2 - 12 , continuously adjustable , each band separately
at mid Tilt 14.2 14.7 15.3 14.5 15 15.3 15.6
Gain (dBi)
over all Tilts 14.1 ± 0.5 14.5 ± 0.6 15.1 ± 0.5 14.3 ± 0.5 14.8 ± 0.5 15.1 ± 0.5 15.4 ± 0.5
(669)
Antenna weight (kg) 30.3
Clamps weight (kg) 3.6 (2 units)
Antenna packing weight (kg) 41.3 (Included clamps)
M ast diameter supported (mm) 50 - 115
1273
1999
Accessories
Weigh
It em M odel Descript ion Unit s per ant enna
t
Downt ilt kit ASMDT0D01 Mechanical downt ilt : 0 - 12° 2.1 kg 1 (Separate packing)
ATR4516R2v06
DXXX-690-862/ 880-960/ 690-960-65/ 65/ 65-15i/ 15.5i/ 16i-M / M / M -R
EasyRET 3L 6-Port Ant enna w it h 3 Int egrat ed RCUs - 2.0m
Propert ies
RET type Integrated RET
RET protocols* AISG 2.0 / 3GPP
Input voltage range (V) 10 - 30 DC
< 0.5 (when the motor does not work, 12 V)
Power consumption (W) < 4.5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 40 (typically, depending on antenna type)
2 x 8 pin connector according to IEC 60130-9
RET connector
Daisy chain in: M ale / Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
DC n/ c RS-485B n/ c RS-485A DC DC return n/ c
2.5 (10/ 350 μs)
Lightning protection (kA)
10 (8/ 20 μs)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET
antenna software interface is switchable between AISG 2.0/ 3GPP and AISG 1.1 with a vendor defined command. For more details
about protocol switching function, contact Huawei before system installation.
St andards: EN/ IEC 60950-1(Safety), EN/ IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission),
EN/ IEC 62368-1(Safety),ETSI EN 301 489, FCC Part15, ICES-003
Cert if icat ion: CE, FCC, IC, RCM , RoHS, REACH, WEEE
L Band &
H Band
Elect rical Propert ies
690 - 862 690 - 960
Frequency range (M Hz) 880 - 960
690 - 803 790 - 862 690 - 803 790 - 862 824 - 894 880 - 960
Polarization +45° , -45° +45° , -45°
Electrical downtilt (°) 2 - 12 , continuously adjustable , each band separately
at mid Tilt 15.2 15.8 16.4 15.4 16.1 16.3 16.7
Gain (dBi)
over all Tilts 15.1 ± 0.5 15.7 ± 0.6 16.2 ± 0.5 15.3 ± 0.6 16.0 ± 0.6 16.2 ± 0.5 16.5 ± 0.5
Side lobe suppression for first
> 15 > 15 > 17 > 15 > 16 > 16 > 17
side lobe above main beam (dB)
Horizontal 3dB beam width ( °) 68 ± 6 62 ± 5 58 ± 5 68 ± 6 62 ± 5 60 ± 5 58 ± 5
Vertical 3dB beam width ( °) 8.2 ± 0.6 7.4 ± 0.5 6.5 ± 0.4 8.5 ± 0.7 7.7 ± 0.6 7.4 ± 0.6 7.0 ± 0.5
VSWR < 1.5 < 1.5 < 1.5
Cross polar isolation (dB) ≥ 28 ≥ 28 ≥ 28
Interband isolation (dB) ≥ 28 ≥ 28 ≥ 28
Front to back ratio , ± 30° (dB) > 22 > 23 > 25 > 22 > 23 > 24 > 25
Cross polar ratio (dB) 0° > 16 > 20 > 20 > 16 > 19 > 20 > 20
M ax. power per input (W) 400 (at 50℃ ambient temperature) * 500 (at 50℃ ambient temperature) *
Intermodulation IM 3 (dBc) ≤ -150 (2 x 43 dBm carrier) ≤ -153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC Ground
106
M echanical Propert ies
Antenna dimensions (H x W x D) (mm) 2769 x 429 x 196
Packing dimensions (H x W x D) (mm) 2980 x 530 x 275
(925)
Antenna weight (kg) 38.5
Clamps weight (kg) 5.8 (2 units)
Antenna packing weight (kg) 59.0 (Included clamps)
M ast diameter supported (mm) 50 - 115
Radome material Fiberglass
Radome colour Light grey
1787
2769
Accessories
Item Model Description Weight Units per antenna
Downtilt kit ASMDT0F01 Mechanical downtilt: 0 - 8 ° 3.1 kg 1 (Separate packing)
ATR4517R10v06
DXXX-690-862/ 880-960/ 690-960-65/ 65/ 65-16i/ 16.5i/ 17i-M / M / M -R
EasyRET 3L 6-Port Ant enna w it h 3 Int egrat ed RCUs - 2.6m
Propert ies
RET type Integrated RET
RET protocols* AISG 2.0 / 3GPP
Input voltage range (V) 10 - 30 DC
< 0.5 (when the motor does not work, 12 V)
Power consumption (W) < 4.5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 40 (typically, depending on antenna type)
2 x 8 pin connector according to IEC 60130-9
RET connector
Daisy chain in: M ale / Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
DC n/ c RS-485B n/ c RS-485A DC DC return n/ c
2.5 (10/ 350 μs)
Lightning protection (kA)
10 (8/ 20 μs)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET
antenna software interface is switchable between AISG 2.0/ 3GPP and AISG 1.1 with a vendor defined command. For more details
about protocol switching function, contact Huawei before system installation.
St andards: EN/ IEC 60950-1(Safety), EN/ IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission),
EN/ IEC 62368-1(Safety),ETSI EN 301 489, FCC Part15, ICES-003
Cert if icat ion: CE, FCC, IC, RCM , RoHS, REACH, WEEE
L Band &
H Band
Elect rical Propert ies
1710 - 2200
Frequency range (M Hz)
1710 - 1880 1850 - 1990 1920 - 2170 2170 - 2200
Polarization +45° , -45°
Electrical downtilt (°) 0 - 10 , continuously adjustable
at mid Tilt 17.4 17.8 18.0 17.9
Gain (dBi)
over all Tilts 17.2 ± 0.4 17.6 ± 0.4 17.7 ± 0.4 17.8 ± 0.4
Side lobe suppression for first side
> 19 > 19 > 18 > 17
lobe above main beam (dB)
Horizontal 3dB beam width ( °) 68 ± 1.5 67 ± 1.5 66 ± 2 63 ± 2
Vertical 3dB beam width ( °) 7.4 ± 0.4 6.9 ± 0.4 6.5 ± 0.4 6.0 ± 0.3
VSWR < 1.5
Cross polar isolation (dB) ≥ 30
Front to back ratio, ± 30° (dB) > 28 > 28 > 27 > 27
Cross polar ratio (dB) 0° > 22 > 22 > 22 > 18
M ax. power per input (W) 300 (at 50℃ ambient temperature)
Intermodulation IM 3 (dBc) ≤ -153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC Ground
Accessories
It em M odel Descript ion Weight Unit s per ant enna
M echanical downtilt:
Downtilt kit ASM DT0A01 0.6 kg 1 (Separate packing)
0 - 12 °
A194518R0v06
DX-1710-2200-65-18i-M -R
EasyRET High-Band 2-Port Ant enna w it h 1 Int egrat ed RCU - 1.4m
Propert ies
RET type Integrated RET
RET protocols* AISG 2.0 / 3GPP
Input voltage range (V) 10 - 30 DC
< 0.5 (when the motor does not work, 12 V)
Power consumption (W) < 3 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 30 (typically, depending on antenna type)
2 x 8 pin connector according to IEC 60130-9
RET connector
Daisy chain in: M ale / Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
DC n/ c RS-485B n/ c RS-485A DC DC return n/ c
2.5 (10/ 350 μs)
Lightning protection (kA)
10 (8/ 20 μs)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET
antenna software interface is switchable between AISG 2.0/ 3GPP and AISG 1.1 with a vendor defined command. For more details
about protocol switching function, contact Huawei before system installation.
St andards: EN/ IEC 60950-1(Safety), EN/ IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission),
EN/ IEC 62368-1(Safety),ETSI EN 301 489, FCC Part15, ICES-003
Cert if icat ion: CE, FCC, IC, RCM , RoHS, REACH, WEEE
HWxxxx……b
b
b - Blue
L Band &
H Band
Elect rical Propert ies
1710 - 2690
Frequency range (M Hz)
1710 - 1990 1920 - 2200 2200 - 2490 2490 - 2690
Polarization +45° , -45°
Electrical downtilt (°) 0 - 12 , continuously adjustable
at mid Tilt 17.4 18.0 18.5 18.6
Gain (dBi)
over all Tilts 17.2 ± 0.3 17.6 ± 0.5 18.3 ± 0.4 18.4 ± 0.4
Side lobe suppression for first side
> 18 > 18 > 18 > 18
lobe above main beam (dB)
Horizontal 3dB beam width (°) 68 ± 2.0 65 ± 2.4 62 ± 2.7 60 ± 1.5
Vertical 3dB beam width ( °) 6.8 ± 0.4 6.1 ± 0.4 5.5 ± 0.4 5.0 ± 0.3
VSWR < 1.5
Cross polar isolation (dB) ≥ 30
Front to back ratio, ± 30° (dB) > 28 > 29 > 29 > 29
Cross polar ratio (dB) 0° > 20 > 20 > 20 > 20
M ax. power per input (W) 250 (at 50℃ ambient temperature)
Intermodulation IM 3 (dBc) ≤ -153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC Ground
Accessories
It em M odel Descript ion Weight Unit s per ant enna
M echanical downtilt:
Downtilt kit ASM DT0A01 0.6 kg 1 (Separate packing)
0 - 12 °
A264518R0v06
DX-1710-2690-65-18i-M -R
EasyRET High-Band 2-Port Ant enna w it h 1 Int egrat ed RCU - 1.4m
Propert ies
RET type Integrated RET
RET protocols* AISG 2.0 / 3GPP
Input voltage range (V) 10 - 30 DC
< 0.5 (when the motor does not work, 12 V)
Power consumption (W) < 3 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 30 (typically, depending on antenna type)
2 x 8 pin connector according to IEC 60130-9
RET connector
Daisy chain in: M ale / Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
DC n/ c RS-485B n/ c RS-485A DC DC return n/ c
2.5 (10/ 350 μs)
Lightning protection (kA)
10 (8/ 20 μs)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET
antenna software interface is switchable between AISG 2.0/ 3GPP and AISG 1.1 with a vendor defined command. For more details
about protocol switching function, contact Huawei before system installation.
St andards: EN/ IEC 60950-1(Safety), EN/ IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission),
EN/ IEC 62368-1(Safety),ETSI EN 301 489, FCC Part15, ICES-003
Cert if icat ion: CE, FCC, IC, RCM , RoHS, REACH, WEEE
HWxxxx……y
y
y - Yellow
L Band &
H Band
Elect rical Propert ies
1695 - 2690
Frequency range (M Hz)
1695 - 1990 1920 - 2200 2200 - 2490 2490 - 2690
Polarization +45° , -45°
Electrical downtilt (°) 0 - 6 , continuously adjustable
at mid Tilt 19.8 20.3 20.7 21.0
Gain (dBi)
over all Tilts 19.8 ± 0.5 20.3 ± 0.5 20.7 ± 0.5 21.0 ± 0.5
Side lobe suppression for first side
> 18 > 17 > 17 > 17
lobe above main beam (dB)
Horizontal 3dB beam width ( °) 68 ± 4 65 ± 3 61 ± 2 59 ± 4
Vertical 3dB beam width ( °) 4.4 ± 0.4 4.0 ± 0.4 3.5 ± 0.2 3.3 ± 0.3
VSWR < 1.5
Cross polar isolation (dB) ≥ 28
Front to back ratio , ± 30° (dB) > 27 > 27 > 27 > 27
Cross polar ratio (dB) 0° > 20 > 20 > 20 > 20
M ax. power per input (W) 250 (at 50℃ ambient temperature)
Intermodulation IM 3 (dBc) ≤ -153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC Ground
801
Antenna weight (kg) 9.8
Clamps weight (kg) 2.9 (2 units)
Antenna packing weight (kg) 16.8 (Included clamps)
M ast diameter supported (mm) 50 -115
Radome material Fiberglass
Radome colour Light grey
2130
Accessories
Downtilt kit ASM DT0B01 Mechanical downt ilt : 0 - 12 ° 1.3 kg 1 (Separate packing)
A264521R1v06
DX-1695-2690-65-21i-M -R
EasyRET High-Band 2-Port Ant enna w it h 1 Int egrat ed RCU - 2.0m
Propert ies
RET type Integrated RET
RET protocols* AISG 2.0 / 3GPP
Input voltage range (V) 10 - 30 DC
< 0.5 (when the motor does not work, 12 V)
Power consumption (W) < 3 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 30 (typically, depending on antenna type)
2 x 8 pin connector according to IEC 60130-9
RET connector
Daisy chain in: M ale / Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
DC n/ c RS-485B n/ c RS-485A DC DC return n/ c
2.5 (10/ 350 μs)
Lightning protection (kA)
10 (8/ 20 μs)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET
antenna software interface is switchable between AISG 2.0/ 3GPP and AISG 1.1 with a vendor defined command. For more
details about protocol switching function, contact Huawei before system installation.
St andards: EN/ IEC 60950-1(Safety), EN/ IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission),
EN/ IEC 62368-1(Safety),ETSI EN 301 489, FCC Part15, ICES-003
Cert if icat ion: CE, FCC, IC, RCM , RoHS, REACH, WEEE
HWxxxx……y1 y
y - Yellow
L Band &
H Band
Elect rical Propert ies
1695 - 2690
Frequency range (M Hz)
1695 - 1990 1920 - 2200 2200 - 2490 2490 - 2690
Polarization +45° , -45°
Electrical downtilt (°) 2 - 12 , continuously adjustable
at mid Tilt 19.5 19.8 19.9 20.0
Gain (dBi)
over all Tilts 19.4 ± 0.5 19.7 ± 0.4 19.8 ± 0.4 19.9 ± 0.5
Side lobe suppression for first side
> 17 > 17 > 16 > 16
lobe above main beam (dB)
Horizontal 3dB beam width ( °) 36 ± 2.0 34 ± 1.5 32 ± 1.5 30 ± 1.5
Vertical 3dB beam width ( °) 7.1 ± 0.5 6.5 ± 0.5 5.5 ± 0.4 5.1 ± 0.4
VSWR < 1.5
Cross polar isolation (dB) ≥ 28
Interband isolation (dB) ≥ 28
Front to back ratio , ± 30° (dB) > 29 > 32 > 33 > 33
Cross polar ratio (dB) 0° > 21 > 21 > 20 > 24
M ax. power per input (W) 250 (at 50℃ ambient temperature)*
Intermodulation IM 3 (dBc) ≤ -153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC Ground
(56)
Antenna weight (kg) 13.4
Clamps weight (kg) 2.9 (2 units)
Antenna packing weight (kg) 21.3 (Included clamps)
M ast diameter supported (mm) 50 - 115
Radome material Fiberglass
1365
1251
Accessories
It em M odel Descript ion Weight Unit s per ant enna
M echanical downtilt:
Downtilt kit ASM DT0B01 1.3 kg 1 (Separate packing)
0 - 16°
A264521R2v06
DX-1695-2690-33-21i-M -R
EasyRET High-Band 2-Port Ant enna w it h 1 Int egrat ed RCU - 1.4m
Propert ies
RET type Integrated RET
RET protocols* AISG 2.0 / 3GPP
Input voltage range (V) 10 - 30 DC
< 0.5 (when the motor does not work, 12 V)
Power consumption (W) < 3 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 30 (typically, depending on antenna type)
2 x 8 pin connector according to IEC 60130-9
RET connector
Daisy chain in: M ale / Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
DC n/ c RS-485B n/ c RS-485A DC DC return n/ c
2.5 (10/ 350 μs)
Lightning protection (kA)
10 (8/ 20 μs)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET
antenna software interface is switchable between AISG 2.0/ 3GPP and AISG 1.1 with a vendor defined command. For more
details about protocol switching function, contact Huawei before system installation.
St andards: EN/ IEC 60950-1(Safety), EN/ IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission),
EN/ IEC 62368-1(Safety),ETSI EN 301 489, FCC Part15, ICES-003
Cert if icat ion: CE, FCC, IC, RCM , RoHS, REACH, WEEE
y - Yellow
L Band &
H Band
Elect rical Propert ies
2 x (1710 - 2200)
Frequency range (M Hz)
1710 - 1880 1850 - 1990 1920 - 2170 2170 - 2200
Polarization +45° , -45°
Electrical downtilt (°) 0 - 10 , continuously adjustable, each band separately
at mid Tilt 17.6 18.0 18.2 18.1
Gain (dBi)
over all Tilts 17.5 ± 0.5 17.8 ± 0.4 18.0 ± 0.4 17.9 ± 0.4
Side lobe suppression for first side
> 20 > 18 > 18 > 17
lobe above main beam (dB)
Horizontal 3dB beam width ( °) 67 ± 3 66 ± 3 64 ± 5 61 ± 4
Vertical 3dB beam width (°) 7.4 ± 0.4 6.9 ± 0.4 6.5 ± 0.6 6.0 ± 0.3
VSWR < 1.5
Cross polar isolation (dB) ≥ 30
Interband isolation (dB) ≥ 30 (1710 - 2200 / / 1710 - 2200 M Hz)
Front to back ratio, ± 30° (dB) > 27 > 27 > 26 > 26
Cross polar ratio (dB) 0° > 22 > 22 > 21 > 18
M ax. power per input (W) 300 (at 50℃ ambient temperature)
Intermodulation IM 3 (dBc) ≤ -153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC Ground
106
M echanical Propert ies
(45)
Antenna dimensions (H x W x D) (mm) 1365 x 269 x 86
Packing dimensions (H x W x D) (mm) 1680 x 340 x 155
Antenna weight (kg) 10.6
Clamps weight (kg) 2.9 (2 units)
Antenna packing weight (kg) 17.6 (Included clamps)
M ast diameter supported (mm) 50 - 115
Radome material Fiberglass
Radome colour Light grey
1365
1274
Accessories
It em M odel Descript ion Weight Unit s per ant enna
M echanical downtilt:
Downtilt kit ASM DT0B01 1.3 kg 1 (Separate packing)
0 - 16 °
ADU4518R1v06
DXX-1710-2200/ 1710-2200-65/ 65-18i/ 18i-M / M -R
EasyRET 2H 4-Port Ant enna w it h 2 Int egrat ed RCUs - 1.4m
HWxxxx……bL
HWxxxx……bbR bL bbR
L Band &
H Band
Elect rical Propert ies
2 x (1710 - 2690)
Frequency range (M Hz)
1710 - 1990 1920 - 2200 2200 - 2490 2490 - 2690
Polarization +45° , -45°
Electrical downtilt (°) 0 - 12 , continuously adjustable, each band separately
at mid Tilt 17.4 17.9 18.2 18.4
Gain (dBi)
over all Tilts 17.3 ± 0.3 17.7 ± 0.4 18.0 ± 0.3 18.2 ± 0.4
Side lobe suppression for first side
> 18 > 18 > 18 > 18
lobe above main beam (dB)
Horizontal 3dB beam width (°) 66 ± 2.7 65 ± 2.7 63 ± 2.8 61 ± 2.6
Vertical 3dB beam width ( °) 6.9 ± 0.3 6.3 ± 0.3 5.5 ± 0.3 5.0 ± 0.3
VSWR < 1.5
Cross polar isolation (dB) ≥ 30
Interband isolation (dB) ≥ 30 (1710 - 2690 / / 1710 - 2690 M Hz)
Front to back ratio, ± 30° (dB) > 27 > 27 > 27 > 27
Cross polar ratio (dB) 0° > 20 > 20 > 20 > 20
M ax. power per input (W) 250 (at 50℃ ambient temperature)
Intermodulation IM 3 (dBc) ≤ -153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC Ground
(45)
1365 x 269 x 86
(mm)
Packing dimensions (H x W x D) (mm) 1680 x 340 x 155
Antenna weight (kg) 11.8
Clamps weight (kg) 2.9 (2 units)
Antenna packing weight (kg) 18.8 (included clamps)
M ast diameter supported (mm) 50 - 115
Radome material Fiberglass
1365
1274
Accessories
It em M odel Descript ion Weight Unit s per ant enna
M echanical downtilt:
Downtilt kit ASM DT0B01 1.3 kg 1 (Separate packing)
0 - 16 °
ADU4518R6v06
DXX-1710-2690/ 1710-2690-65/ 65-18i/ 18i-M / M -R
EasyRET 2H 4-Port Ant enna w it h 2 Int egrat ed RCUs - 1.4m
Propert ies
RET type Integrated RET
RET protocols* AISG 2.0 / 3GPP
Input voltage range (V) 10 - 30 DC
< 0.5 (when the motor does not work, 12 V)
Power consumption (W) < 3 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 30 (typically, depending on antenna type)
2 x 8 pin connector according to IEC 60130-9
RET connector
Daisy chain in: M ale / Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
DC n/ c RS-485B n/ c RS-485A DC DC return n/ c
2.5 (10/ 350 μs)
Lightning protection (kA)
10 (8/ 20 μs)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET
antenna software interface is switchable between AISG 2.0/ 3GPP and AISG 1.1 with a vendor defined command. For more details
about protocol switching function, contact Huawei before system installation.
St andards: EN/ IEC 60950-1(Safety), EN/ IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission),
EN/ IEC 62368-1(Safety),ETSI EN 301 489, FCC Part15, ICES-003
Cert if icat ion: CE, FCC, IC, RCM , RoHS, REACH, WEEE
HWxxxx……yL
HWxxxx……yyR
yL yyR
y - Yellow
L - Left array
R - Right array
L Band &
H Band
Elect rical Propert ies
2 x (1695 - 2690)
Frequency range (M Hz)
1695 - 1990 1920 - 2200 2200 - 2490 2490 - 2690
Polarization +45° , -45°
Electrical downtilt (°) 0 - 6 , continuously adjustable , each band separately
at mid Tilt 20.0 20.5 20.7 21.0
Gain (dBi)
over all Tilts 20.0 ± 0.5 20.5 ± 0.5 20.7 ± 0.5 21.0 ± 0.5
Side lobe suppression for first side
> 18 > 17 > 17 > 16
lobe above main beam (dB)
Horizontal 3dB beam width ( °) 65 ± 4 62 ± 3 60 ± 3 58 ± 5
Vertical 3dB beam width ( °) 4.4 ± 0.4 4.0 ± 0.4 3.5 ± 0.2 3.3 ± 0.3
VSWR < 1.5
Cross polar isolation (dB) ≥ 28
Interband isolation (dB) ≥ 28
Front to back ratio , ± 30° (dB) > 26 > 26 > 26 > 26
Cross polar ratio (dB) 0° > 20 > 20 > 20 > 20
M ax. power per input (W) 250 (at 50℃ ambient temperature) *
Intermodulation IM 3 (dBc) ≤ -153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC Ground
(743)
Antenna weight (kg) 16.2
Clamps weight (kg) 3.6 (2 units)
Antenna packing weight (kg) 26.8 (Included clamps)
M ast diameter supported (mm) 50-115
Radome material Fiberglass
Radome colour Light grey
2099
1310
Accessories
It em M odel Descript ion Weight Unit s per ant enna
M echanical downtilt:
Downtilt kit ASM DT0D01 2.1 kg 1 (Separate packing)
0 - 12 °
ADU4521R0v06
DXX-1695-2690/ 1695-2690-65/ 65-21i/ 21i-M / M -R
EasyRET 2H 4-Port Ant enna w it h 2 Int egrat ed RCUs - 2.0m
Propert ies
RET type Integrated RET
RET protocols* AISG 2.0 / 3GPP
Input voltage range (V) 10 - 30 DC
< 0.5 (when the motor does not work, 12 V)
Power consumption (W) < 3 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 30 (typically, depending on antenna type)
2 x 8 pin connector according to IEC 60130-9
RET connector
Daisy chain in: M ale / Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
DC n/ c RS-485B n/ c RS-485A DC DC return n/ c
2.5 (10/ 350 μs)
Lightning protection (kA)
10 (8/ 20 μs)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET
antenna software interface is switchable between AISG 2.0/ 3GPP and AISG 1.1 with a vendor defined command. For more details
about protocol switching function, contact Huawei before system installation.
St andards: EN/ IEC 60950-1(Safety), EN/ IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission),
EN/ IEC 62368-1(Safety),ETSI EN 301 489, FCC Part15, ICES-003
Cert if icat ion: CE, FCC, IC, RCM , RoHS, REACH, WEEE
HWxxxx……Ly1
HWxxxx……Ry2
Ly1 Ry2
y - Yellow
L - Left array
R - Right array
L Band &
H Band
Elect rical Propert ies
2 x (1710 - 2690)
Frequency range (M Hz)
1710 - 1990 1920 - 2200 2200 - 2490 2490 - 2690
Polarization +45° , -45°
Electrical downtilt (°) 0 - 10 , continuously adjustable , each band separately
Gain (dBi) 20.2 20.5 20.5 20.8
Side lobe suppression for first side
> 16 > 16 > 16 >16
lobe above main beam (dB)
Horizontal 3dB beam width ( °) 36 34 33 32
Vertical 3dB beam width ( °) 7.0 6.3 5.5 5.0
VSWR < 1.5
Cross polar isolation (dB) ≥ 25
Interband isolation (dB) ≥ 25
Front to back ratio, ± 30° (dB) > 25
Cross polar ratio at boresight (dB) > 15
M ax. power per input (W) 250 (at 50℃ ambient temperature)
Total power (W) 700 (at 50℃ ambient temperature)
Intermodulation IM 3 (dBc) ≤ -153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC Ground
1273
1399
Radome colour Light grey
Operational temperature (℃) -40 .. +65
Frontal: 400 (at 150 km/ h)
Wind load (N) Lateral: 235 (at 150 km/ h)
M aximum: 525 (at 150 km/ h)
M ax. operational wind speed (km/ h) 200
Survival wind speed (km/ h) 250
Connector 4 x 4.3-10 Female
Connector position Bottom
Accessories
It em M odel Descript ion Weight Unit s per ant enna
Propert ies
RET type Integrated RET
RET protocols* AISG 2.0 / 3GPP
Input voltage range (V) 10 - 30 DC
< 0.5 (when the motor does not work, 12 V)
Power consumption (W) < 5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 40 (typically, depending on antenna type)
2 x 8 pin connector according to IEC 60130-9
RET connector
Daisy chain in: M ale / Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
DC n/ c RS-485B n/ c RS-485A DC DC return n/ c
2.5 (10/ 350 μs)
Lightning protection (kA)
10 (8/ 20 μs)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET
antenna software interface is switchable between AISG 2.0/ 3GPP and AISG 1.1 with a vendor defined command. For more
details about protocol switching function, contact Huawei before system installation.
St andards: EN/ IEC 60950-1(Safety), EN/ IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission),
EN/ IEC 62368-1(Safety),ETSI EN 301 489, FCC Part15, ICES-003
Cert if icat ion: CE, FCC, IC, RCM , RoHS, REACH, WEEE
HWxxxx……Ly1
HWxxxx……Ry2
y - Yellow
L - Left array R - Right array
L Band &
H Band
Elect rical Propert ies
3 x (1710 - 2690)
Frequency range (M Hz)
1710 - 1990 1920 - 2200 2200 - 2490 2490 - 2690
Polarization +45° , -45°
Electrical downtilt (°) 0 - 12 , continuously adjustable, each band separately
at mid Tilt 17.6 18.0 18.4 18.6
Gain (dBi)
over all Tilts 17.4 ± 0.4 17.8 ± 0.4 18.1 ± 0.4 18.3 ± 0.5
(51)
Antenna dimensions (H x W x D) (mm) 1365 x 376 x 99
Packing dimensions (H x W x D) (mm) 1680 x 440 x 170
Antenna weight (kg) 17.3
Clamps weight (kg) 3.0 (2 units)
Antenna packing weight (kg) 27.0 (included clamps)
M ast diameter supported (mm) 50 - 115
Radome material Fiberglass
1262
1365
Accessories
It em M odel Descript ion Weight Unit s per ant enna
M echanical downtilt:
Downtilt kit ASM DT0C01 2.1 kg 1 (Separate packing)
0 - 16 °
ATR4518R14v06
DXXX-1710-2690/ 1710-2690/ 1710-2690-65/ 65/ 65-18i/ 18i/ 18i-M / M / M -R
EasyRET 3H 6-Port Ant enna w it h 3 Int egrat ed RCUs - 1.4m
Propert ies
RET type Integrated RET
RET protocols* AISG 2.0 / 3GPP
Input voltage range (V) 10 - 30 DC
< 0.5 (when the motor does not work, 12 V)
Power consumption (W) < 4.5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 40 (typically, depending on antenna type)
2 x 8 pin connector according to IEC 60130-9
RET connector
Daisy chain in: M ale / Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
DC n/ c RS-485B n/ c RS-485A DC DC return n/ c
2.5 (10/ 350 μs)
Lightning protection (kA)
10 (8/ 20 μs)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET
antenna software interface is switchable between AISG 2.0/ 3GPP and AISG 1.1 with a vendor defined command. For more details
about protocol switching function, contact Huawei before system installation.
St andards: EN/ IEC 60950-1(Safety), EN/ IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission),
EN/ IEC 62368-1(Safety),ETSI EN 301 489, FCC Part15, ICES-003
Cert if icat ion: CE, FCC, IC, RCM, RoHS, REACH, WEEE
y – Yellow
L - Left array
R - Right array
C - Center array
Pat t ern sam ple f or ref erence
L Band &
H Band
Elect rical Propert ies
4 x (1710 - 2690)
Frequency range (M Hz)
1710 - 1990 1920 - 2200 2200 - 2490 2490 - 2690
Polarization +45° , -45°
Electrical downtilt (° ) 0 - 12 , continuously adjustable, each band separately
at mid Tilt 17.4 17.7 17.9 18.3
Gain (dBi)
over all Tilts 17.2 ± 0.5 17.5 ± 0.5 17.7 ± 0.5 18.0 ± 0.5
Side lobe suppression for first side
> 18 > 18 > 19 > 20
lobe above main beam (dB)
Horizontal 3dB beam width (° ) 68 ± 5 64 ± 5 61 ± 5 60 ± 5
Vertical 3dB beam width (° ) 6.8 ± 0.5 6.1 ± 0.4 5.4 ± 0.4 5.0 ± 0.3
VSWR < 1.5
Cross polar isolation (dB) ≥ 28
Interband isolation (dB) ≥ 28 (1710 - 2690 / / 1710 - 2690 M Hz)
Front to back ratio, ± 30° (dB) > 27 > 28 > 28 > 28
Cross polar ratio (dB) 0° > 22 > 22 > 22 > 23
M ax. power per input (W) 250 (at 50℃ ambient temperature)
Total power (W) 800 (at 50℃ ambient temperature)
Intermodulation IM 3 (dBc) ≤ -153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC Ground
(57)
Packing dimensions (H x W x D) (mm) 1835 x 510 x 185
Antenna weight (kg) 23.9
Clamps weight (kg) 3.6 (2 units)
Antenna packing weight (kg) 35.8 (included clamps)
M ast diameter supported (mm) 50 - 115
Radome material Fiberglass
1499
1385
Accessories
Weigh
It em M odel Descript ion Unit s per ant enna
t
M echanical downtilt:
Downtilt kit ASM DT0D01 2.1 kg 1 (Separate packing)
0 - 16 °
AQU4518R21v06
DXXXX-1710-2690/ 1710-2690/ 1710-2690/ 1710-2690-65/ 65/ 65/ 65-
18i/ 18i/ 18i/ 18i-M / M / M / M -R
EasyRET 4H 8-Port Ant enna w it h 4 Int egrat ed RCUs - 1.4m
Propert ies
RET type Integrated RET
RET protocols* AISG 2.0 / 3GPP
Input voltage range (V) 10 - 30 DC
< 0.5 (when the motor does not work, 12 V)
Power consumption (W) < 4.5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 40 (typically, depending on antenna type)
4 x 8 pin connector according to IEC 60130-9
RET connector
Daisy chain in: M ale / Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
DC n/ c RS-485B n/ c RS-485A DC DC return n/ c
2.5 (10/ 350 μs)
Lightning protection (kA)
10 (8/ 20 μs)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET
antenna software interface is switchable between AISG 2.0/ 3GPP and AISG 1.1 with a vendor defined command. For more details
about protocol switching function, contact Huawei before system installation.
St andards: EN/ IEC 60950-1(Safety), EN/ IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission),
EN/ IEC 62368-1(Safety),ETSI EN 301 489, FCC Part15, ICES-003
Cert if icat ion: CE, FCC, IC, RCM , RoHS, REACH, WEEE
1LnH Band
4 Port s - 1L1H
690-960/
1710-2690
65/ 65 15/ 17.5 0-15/ 2-12 EasyRET2.0 4 x 4.3-10 1499 x 259 x 135 ADU4518R9v06 50 G
690-960/
1710-2690
65/ 65 16/ 18 0-12/ 2-12 EasyRET2.0 4 x 4.3-10 2087 x 259 x 135 ADU4518R7v06 52 G
690-960/
1710-2690
65/ 65 17/ 18 0-10/ 2-12 EasyRET2.0 4 x 4.3-10 2555 x 259 x 135 ADU4518R8v06 54 G
6 Port s - 1L2H
617-894/
0-12/ 0-
1695-2690/ 65/ 65/ 65 16/ 18/ 18
12/ 0-12
EasyRET2.0 6 x 4.3-10 2099 x 399 x 196 ATR4518R28v06 56 N
1695-2690
690-960/
0-14/ 0-10/
1695-2690/ 65/ 65/ 65 15/ 18/ 18
0-10
EasyRET2.0 6 x 4.3-10 1499 x 349 x 166 ATR4518R13v06 58 N
1695-2690
690-960/
0-10/ 0-10/
1695-2690/ 65/ 65/ 65 16/ 18/ 18
0-10
EasyRET2.0 6 x 4.3-10 1999 x 349 x 166 ATR4518R6v06 60 N
1695-2690
690-960/
0-10/ 0-10/
1695-2690/ 65/ 65/ 65 17/ 18/ 18
0-10
EasyRET2.0 6 x 4.3-10 2528 x 349 x 166 ATR4518R11v06 62 N
1695-2690
** Preliminary Issue
M ult i-band
B - 3 1LnH
8 Port s - 1L3H
690-960/
1427-2690/ 15/ 17.5/ 0-14/ 2-12/
1695-2690/
65/ 65/ 65/ 65
18/ 18 2-12/ 2-12
EasyRET2.0 8 x 4.3-10 1499 x 369 x 149 AQU4518R27v06 64 TT
1695-2690
690-960/
1427-2690/ 16/ 17.5/ 2-12/ 2-12/
1695-2690/
65/ 65/ 65/ 65
18/ 18 2-12/ 2-12
EasyRET2.0 8 x 4.3-10 1999 x 369 x 149 AQU4518R22v07 67 TT
1695-2690
690-960/
1710-2690/ 15/ 17.5/ 0-14/ 2-12/
1710-2690/
65/ 65/ 65/ 65
17.5/ 17.5 2-12/ 2-12
EasyRET2.0 8 x 4.3-10 1499 x 369 x 149 AQU4518R14v07 70 TT
1710-2690
690-960/
1695-2690/ 16/ 18/ 2-12/ 2-12/
1695-2690/
65/ 65/ 65/ 65
18/ 18 2-12/ 2-12
EasyRET2.0 8 x 4.3-10 1999 x 369 x 149 AQU4518R11v07 73 TT
1695-2690
690-960/
1695-2690/ 17/ 18/ 0-10/ 0-10/
1695-2690/
65/ 65/ 65/ 65
18/ 17.5 0-10/ 0-10
EasyRET2.0 8 x 4.3-10 2528 x 349 x 166 AQU4518R9v06 76 U
1695-2690
10 Port s - 1L4H
690-960/
1427-2690/ 15/ 17.5/ 0-14/ 2-12/
65/ 65/ 65/ 65/
1695-2200/
65
17/ 17.5/ 2-12/ 2-12/ EasyRET2.0 10 x 4.3-10 1499 x 369 x 149 APE4518R37v06 78 X3
2490-2690/ 17.5 2-12
1695-2690
690-960/
1695-2200/ 16/ 17.5/ 0-10/ 0-10/
65/ 65/ 65/
1695-2200/
65/ 65
17.5/ 18/ 0-10/ 0-10/ EasyRET2.0 10 x 4.3-10 1999 x 349 x 166 APE4518R19v06 81 X2
2490-2690/ 18 0-10
2490-2690
** Preliminary Issue
M ult i-band
B - 3 1LnH
1LnH Band
10 Port s - 1L4H
690-960/
1695-2690/ 0-10/ 2-12/
65/ 65/ 65/ 16/ 16.5/
1695-2690/
65/ 65 16.5/ 16/ 16
2-12/ 2-12/ EasyRET2.0 10 x 4.3-10 1999 x 349 x 166 APE4516R1v06 83 X
1695-2690/ 2-12
1695-2690
690-960/
1695-2690/ 0-10/ 0-10/
65/ 65/ 65/ 17/ 18/ 18
1695-2690/
65/ 65 / 17.5/ 17.5
0-10/ 0-10/ EasyRET2.0 10 x 4.3-10 2528 x 349 x 166 APE4517R0v06 85 X
1695-2690/ 0-10
1695-2690
12 Port s - 1L5H
690-960/
1427-2690/
17/ 17.5/ 1 2-12/ 2-12/
1695-2690/ 65/ 65/ 65/
1695-2690/ 65/ 65/ 65
7.5/ 17.5/ 1 2-12/ 2-12/ EasyRET2.0 12 x 4.3-10 2769 x 369 x 149 ASI4518R30v06 87 XX
7.5/ 17.5 2-12/ 2-12
1695-2690/
1695-2690
** Preliminary Issue
y2 y3 y2 y5
y y1 y2
y1 y4 y1 y3 y4
r r1 r1 r1
y1 y2 y1
y2
y1 y2 y3 r1 y2 y3
y1 r1 y3
b1 b2 b1
r1 r1
ADU4518R9v06
DXX-690-960/ 1710-2690-65/ 65-15i/ 17.5i-M / M -R
EasyRET 1L1H 4-Port Ant enna w it h 2 Int egrat ed RCUs - 1.4m
Vertical 3dB beam width ( °) 15.3 ± 1 14.0 ± 0.7 13.3 ± 0.6 12.3 ± 0.7 7.2 ± 0.7 6.5 ± 0.6 5.7 ± 0.5 5.3 ± 0.3
(181)
Antenna weight (kg) 16.5
Clamps weight (kg) 3.0 (2 units)
Antenna packing weight (kg) 25.5 (Included clamps)
M ast diameter supported (mm) 50 - 115
Radome material Fiberglass
Radome colour Light grey
1265
1499
Accessories
Weigh
It em M odel Descript ion Unit s per ant enna
t
M echanical downtilt:
Downtilt kit ASM DT0C01 2.1 kg 1 (Separat e packing)
0 - 16 °
ADU4518R9v06
DXX-690-960/ 1710-2690-65/ 65-15i/ 17.5i-M / M -R
EasyRET 1L1H 4-Port Ant enna w it h 2 Int egrat ed RCUs - 1.4m
1LnH Band
< 0.5 (when the motor does not work, 12 V)
Power consumption (W) < 3 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 30 (typically, depending on antenna type)
2 x 8 pin connector according to IEC 60130-9
RET connector
Daisy chain in: M ale / Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
DC n/ c RS-485B n/ c RS-485A DC DC return n/ c
2.5 (10/ 350 μs)
Lightning protection (kA)
10 (8/ 20 μs)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET
antenna software interface is switchable between AISG 2.0/ 3GPP and AISG 1.1 with a vendor defined command. For more details
about protocol switching function, contact Huawei before system installation.
St andards: EN/ IEC 60950-1(Safety), EN/ IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission),
EN/ IEC 62368-1(Safety),ETSI EN 301 489, FCC Part15, ICES-003
Cert if icat ion: CE, FCC, IC, RCM , RoHS, REACH, WEEE
HWxxxx……r
HWxxxx……y
y
r - Red y - Yellow
(779)
Packing dimensions (H x W x D) (mm) 2380 x 315 x 220
Ant enna weight (kg) 20.2
Clamps weight (kg) 3.0 (2 units)
Ant enna packing weight (kg) 28.2 (Included clamps)
Mast diameter supported (mm) 50 - 115
Radome material Fiberglass
Radome colour Light grey
2087
1255
Accessories
53
Unit s per
It em M odel Descript ion Weight
ant enna
Mechanical downt ilt :
Downt ilt kit ASMDT0C01 2.1 kg 1 (Separate packing)
0 - 12 °
ADU4518R7v06
DXX-690-960/ 1710-2690-65/ 65-16i/ 18i-M / M -R
EasyRET 1L1H 4-Port Ant enna w it h 2 Int egrat ed RCUs - 2.0m
Propert ies
RET type Integrated RET
RET protocols* AISG 2.0 / 3GPP
Input voltage range (V) 10 - 30 DC
1LnH Band
< 0.5 (when the motor does not work, 12 V)
Power consumption (W) < 3 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 30 (typically, depending on antenna type)
2 x 8 pin connector according to IEC 60130-9
RET connector
Daisy chain in: M ale / Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
DC n/ c RS-485B n/ c RS-485A DC DC return n/ c
2.5 (10/ 350 μs)
Lightning protection (kA)
10 (8/ 20 μs)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET
antenna software interface is switchable between AISG 2.0/ 3GPP and AISG 1.1 with a vendor defined command. For more details
about protocol switching function, contact Huawei before system installation.
St andards: EN/ IEC 60950-1(Safety), EN/ IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission),
EN/ IEC 62368-1(Safety),ETSI EN 301 489, FCC Part15, ICES-003
Cert if icat ion: CE, FCC, IC, RCM , RoHS, REACH, WEEE
HWxxxx……r
HWxxxx……y
y
r - Red y - Yellow
(567)
Packing dimensions (H x W x D) (mm) 2970 x 315 x 220
Ant enna weight (kg) 23.0
Clamps weight (kg) 3.6 (2 units)
Ant enna packing weight (kg) 33.2 (Included clamps)
Mast diameter supported (mm) 50 - 115
Radome material Fiberglass
Radome colour Light grey
Operational t emperature (℃) -40 .. +65
2555
1935
Accessories
It em M odel Descript ion Weight Unit s per ant enna
53
M echanical downtilt:
Downtilt kit ASM DT0D01 2.1 kg 1 (Separate packing)
0-8°
ADU4518R8v06
DXX-690-960/ 1710-2690-65/ 65-17i/ 18i-M / M -R
EasyRET 1L1H 4-Port Ant enna w it h 2 Int egrat ed RCUs - 2.6m
Propert ies
RET type Integrated RET
RET protocols* AISG 2.0 / 3GPP
Input voltage range (V) 10 - 30 DC
1LnH Band
< 0.5 (when the motor does not work, 12 V)
Power consumption (W) < 3 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 30 (typically, depending on antenna type)
2 x 8 pin connector according to IEC 60130-9
RET connector
Daisy chain in: M ale / Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
DC n/ c RS-485B n/ c RS-485A DC DC return n/ c
2.5 (10/ 350 μs)
Lightning protection (kA)
10 (8/ 20 μs)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET
antenna software interface is switchable between AISG 2.0/ 3GPP and AISG 1.1 with a vendor defined command. For more details
about protocol switching function, contact Huawei before system installation.
St andards: EN/ IEC 60950-1(Safety), EN/ IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission),
EN/ IEC 62368-1(Safety),ETSI EN 301 489, FCC Part15, ICES-003
Cert if icat ion: CE, FCC, IC, RCM , RoHS, REACH, WEEE
HWxxxx……r
HWxxxx……y
y
r - Red y - Yellow
(725)
Antenna weight (kg) 29.5
Clamps weight (kg) 3.6 (2 units)
Antenna packing weight (kg) 40.5 (Included clamps)
M ast diameter supported (mm) 50 - 115
Radome material Fiberglass
1310
2099
Accessories
It em M odel Descript ion Weight Unit s per ant enna
M echanical downtilt:
Downtilt kit ASM DT0D01 2.1 kg 1 (Separate packing)
0 - 12 °
ATR4518R28v06
DXXX-617-894/ 1695-2690/ 1695-2690-65/ 65/ 65-16i/ 18i/ 18i-M / M / M -R
EasyRET 1L2H 6-Port Ant enna w it h 3 Int egrat ed RCUs - 2.0m
Propert ies
RET type Integrated RET
RET protocols* AISG 2.0 / 3GPP
Input voltage range (V) 10 - 30 DC
1LnH Band
< 0.5 (when the motor does not work, 12 V)
Power consumption (W) < 4.5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 40 (typically, depending on antenna type)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET
antenna software interface is switchable between AISG 2.0/ 3GPP and AISG 1.1 with a vendor defined command. For more details
about protocol switching function, contact Huawei before system installation.
St andards: EN/ IEC 60950-1(Safety), EN/ IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission),
EN/ IEC 62368-1(Safety),ETSI EN 301 489, FCC Part15, ICES-003
Cert if icat ion: CE, FCC, IC, RCM , RoHS, REACH, WEEE
r1
r - Red y - Yellow
L - Left array R - Right array
(137)
106
Packing dimensions (H x W x D) (mm) 1740 x 445 x 230
Antenna weight (kg) 19.7
Clamps weight (kg) 3.6 (2 units)
Antenna packing weight (kg) 27.5 (included clamps)
M ast diameter supported (mm) 50 - 115
Radome material Fiberglass
1499
1310
Accessories
It em M odel Descript ion Weight Unit s per ant enna
M echanical downtilt:
Downtilt kit ASM DT0D01 2.1 kg 1 (Separate packing)
0 - 16 °
ATR4518R13v06
DXXX-690-960/ 1695-2690/ 1695-2690-65/ 65/ 65-15i/ 18i/ 18i-M / M / M -R
EasyRET 1L2H 6-Port Ant enna w it h 3 Int egrat ed RCUs - 1.4m
Propert ies
RET type Integrated RET
RET protocols* AISG 2.0 / 3GPP
1LnH Band
Input voltage range (V) 10 - 30 DC
< 0.5 (when the motor does not work, 12 V)
Power consumption (W) < 4.5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 40 (typically, depending on antenna type)
2 x 8 pin connector according to IEC 60130-9
RET connector
Daisy chain in: M ale / Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
DC n/ c RS-485B n/ c RS-485A DC DC return n/ c
2.5 (10/ 350 μs)
Lightning protection (kA)
10 (8/ 20 μs)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET
antenna software interface is switchable between AISG 2.0/ 3GPP and AISG 1.1 with a vendor defined command.
For more details about protocol switching function, contact Huawei before system installation.
St andards: EN/ IEC 60950-1(Safety), EN/ IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission),
EN/ IEC 62368-1(Safety),ETSI EN 301 489, FCC Part15, ICES-003
Cert if icat ion: CE, FCC, IC, RCM , RoHS, REACH, WEEE
HWxxxx……Ly1
HWxxxx……r1
y1 y2
HWxxxx……Ry2
r - Red y - Yellow r1
L - Left array R - Right array
Vertical 3dB beam width ( °) 10.3 ± 0.7 9.5 ± 0.5 9.2 ± 0.6 8.6 ± 0.5 7.1 ± 0.5 6.5 ± 0.5 5.8 ± 0.4 5.3 ± 0.2
(637)
Antenna weight (kg) 23.4
Clamps weight (kg) 3.6 (2 units)
Antenna packing weight (kg) 31.5 (included clamps)
M ast diameter supported (mm) 50 - 115
Radome material Fiberglass
Radome colour Light grey
1310
1999
Accessories
52
Propert ies
RET type Integrated RET
RET protocols* AISG 2.0 / 3GPP
Input voltage range (V) 10 - 30 DC
1LnH Band
< 0.5 (when the motor does not work, 12 V)
Power consumption (W) < 4.5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 40 (typically, depending on antenna type)
2 x 8 pin connector according to IEC 60130-9
RET connector
Daisy chain in: M ale / Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
DC n/ c RS-485B n/ c RS-485A DC DC return n/ c
2.5 (10/ 350 μs)
Lightning protection (kA)
10 (8/ 20 μs)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET
antenna software interface is switchable between AISG 2.0/ 3GPP and AISG 1.1 with a vendor defined command.
For more details about protocol switching function, contact Huawei before system installation.
St andards: EN/ IEC 60950-1(Safety), EN/ IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission),
EN/ IEC 62368-1(Safety),ETSI EN 301 489, FCC Part15, ICES-003
Cert if icat ion: CE, FCC, IC, RCM , RoHS, REACH, WEEE
HWxxxx……Ly1
HWxxxx……r1
y1 y2
HWxxxx……Ry2
r - Red y - Yellow r1
L - Left array R - Right array
(591)
Antenna weight (kg) 27.4
Clamps weight (kg) 3.6 (2 units)
Antenna packing weight (kg) 43.1 (included clamps)
M ast diameter supported (mm) 50 - 115
Radome material Fiberglass
Radome colour Light grey
Operational temperature (℃) -40 .. +65
1885
2528
Accessories
M echanical downtilt:
Downtilt kit ASM DT0D01 2.1 kg 1 (Separate packing)
0-8°
ATR4518R11v06
DXXX-690-960/ 1695-2690/ 1695-2690-65/ 65/ 65-17i/ 18i/ 18i-M / M / M -R
EasyRET 1L2H 6-Port Ant enna w it h 3 Int egrat ed RCUs - 2.6m
Propert ies
RET type Integrated RET
RET protocols* AISG 2.0 / 3GPP
Input voltage range (V) 10 - 30 DC
1LnH Band
< 0.5 (when the motor does not work, 12 V)
Power consumption (W) < 4.5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 40 (typically, depending on antenna type)
2 x 8 pin connector according to IEC 60130-9
RET connector
Daisy chain in: M ale / Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
DC n/ c RS-485B n/ c RS-485A DC DC return n/ c
2.5 (10/ 350 μs)
Lightning protection (kA)
10 (8/ 20 μs)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET
antenna software interface is switchable between AISG 2.0/ 3GPP and AISG 1.1 with a vendor defined command.
For more details about protocol switching function, contact Huawei before system installation.
St andards: EN/ IEC 60950-1(Safety), EN/ IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission),
EN/ IEC 62368-1(Safety),ETSI EN 301 489, FCC Part15, ICES-003
Cert if icat ion: CE, FCC, IC, RCM , RoHS, REACH, WEEE
HWxxxx……Ly1
HWxxxx……r1
y1 y2
HWxxxx……Ry2
r - Red y - Yellow r1
L - Left array R - Right array
Electrical downtilt (°) 0 - 14 , cont inuously adjust able 2 - 12 , cont inuously adjust able
at mid Tilt 14.0 14.5 14.7 15.0 15.9 17.3 17.5 17.8 18.1
Gain (dBi) 15.8 17.5 17.6
over all Tilts 14.0 ± 0.5 14.4 ± 0.5 14.7 ± 0.5 14.9 ± 0.5
± 0.5
17.1 ± 0.5 17.2 ± 0.5
± 0.4 ± 0.5
Horizontal 3dB beam width ( °) 68 ± 1.8 66 ± 2.5 64 ± 2.5 61 ± 2.0 73 ± 6.0 69 ± 5.5 68 ± 5.7 63 ± 4.7 58 ± 4.0
Vertical 3dB beam width ( °) 15.4 ± 1.1 13.8 ± 1.0 13.2 ± 0.7 12.3 ± 0.6 8.0 ± 0.4 6.5 ± 0.6 5.9 ± 0.5 5.1 ± 0.4 4.8 ± 0.4
Front to back ratio , ± 30° (dB) > 22 > 23 > 24 > 26 > 22 > 23 > 23 > 27 > 24
Cross polar ratio (dB) 0° > 20 > 22 > 22 > 20 > 20 > 22 > 21 > 22 > 17
M ax. power per input (W) 500 (at 50℃ ambient temperature)* 250 (at 50℃ ambient temperature)*
Impedance (Ω) 50
Grounding DC Ground
Electrical downtilt (°) 2 - 12 , cont inuously adjust able 2 - 12 , cont inuously adjust able
at mid Tilt 17.3 17.5 18.0 18.2 17.4 17.8 18.3 18.4
Gain (dBi)
over all Tilts 17.1 ± 0.5 17.3 ± 0.5 17.8 ± 0.4 18.0 ± 0.5 17.2 ± 0.5 17.6 ± 0.5 18.0 ± 0.4 18.3 ± 0.5
Horizontal 3dB beam width ( °) 63 ± 6.0 62 ± 6.0 58 ± 5.0 58 ± 5.0 69 ± 4.0 67 ± 4.0 62 ± 3.0 58 ± 4.0
Vertical 3dB beam width ( °) 6.5 ± 0.5 5.9 ± 0.5 5.1 ± 0.2 4.8 ± 0.3 6.5 ± 0.5 5.9 ± 0.4 5.1 ± 0.2 4.8 ± 0.2
Front to back ratio , ± 30° (dB) > 27 > 28 > 28 > 27 > 24 > 27 > 27 > 26
Cross polar ratio (dB) 0° > 22 > 19 > 17 > 22 > 22 > 22 > 19 > 22
M ax. power per input (W) 250 (at 50℃ ambient t emperature)* 250 (at 50℃ ambient temperature)*
Impedance (Ω) 50 50
(58)
Packing dimensions (H x W x D) (mm) 1790 x 435 x 240
Antenna weight (kg) 24.8
1LnH Band
Clamps weight (kg) 3.6 (2 units)
Antenna packing weight (kg) 35.0 (Included clamps)
M ast diameter supported (mm) 50 - 115
Radome material Fiberglass
Radome colour Light grey
1381
1499
Operational temperature (℃) -40 .. +65
Frontal: 425 (at 150 km/ h)
Wind load (N) Lateral: 140 (at 150 km/ h)
M aximum: 510 (at 150 km/ h)
M ax. operational wind speed (km/ h) 200
Survival wind speed (km/ h) 250
Connector 8 x 4.3-10 Female
Connector position Bottom
60
Accessories
It em M odel Descript ion Weight Unit s per ant enna
M echanical downtilt:
Downtilt kit ASM DT0D01 2.1 kg 1 (Separate packing)
0 - 16 °
Propert ies
RET type Integrated RET
RET protocols* AISG 2.0 / 3GPP
Input voltage range (V) 10 - 30 DC
< 0.5 (when the motor does not work, 12 V)
Power consumption (W) < 4.5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 40 (typically, depending on antenna type)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET
antenna software interface is switchable between AISG 2.0/ 3GPP and AISG 1.1 with a vendor defined command.
For more details about protocol switching function, contact Huawei before system installation.
St andards: EN/ IEC 60950-1(Safety), EN/ IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission),
EN/ IEC 62368-1(Safety),ETSI EN 301 489, FCC Part15, ICES-003
Cert if icat ion: CE, FCC, IC, RCM , RoHS, REACH, WEEE
HWxxxx……r1
y1 y2 y3
HWxxxx……Cy2
HWxxxx……Ry3
r1
r - Red y - Yellow
L - Left array C - Center array
R - Right array
AQU4518R22v07
DXXXX-690-960/ 1427-2690/ 1695-2690/ 1695-2690-65/ 65/ 65/ 65-
16i/ 17.5i/ 18i/ 18i-M / M / M / M -R
EasyRET 1L3H 8-Port Ant enna w it h 4 Int egrat ed RCUs - 2.0m
Ant enna Specif icat ions
Elect rical Propert ies
690 - 960 1427 - 2690 (Ry3)
Frequency range (M Hz)
690 - 803 790 - 862 824 - 894 880 - 960 1427 - 1518 1695 - 1990 1920 - 2200 2200 - 2490 2490 - 2690
Polarization +45° , -45° +45° , -45°
1LnH Band
Electrical downtilt (°) 2 - 12 , continuously adjustable , each band separately
at mid Tilt 15.4 15.7 15.9 16.1 16.0 17.3 17.5 17.8 18.1
Gain (dBi)
over all Tilts 15.3 ± 0.5 15.6 ± 0.5 15.8 ± 0.5 16.0 ± 0.5 15.9 ± 0.5 17.1 ± 0.5 17.2 ± 0.5 17.5 ± 0.4 17.6 ± 0.5
Vertical 3dB beam width (°) 10.8 ± 1.0 9.7 ± 0.5 9.4 ± 0.5 8.8 ± 0.4 8.1 ± 0.4 6.6 ± 0.5 6.0 ± 0.5 5.1 ± 0.4 4.8 ± 0.3
(535)
Antenna weight (kg) 30.0
Clamps weight (kg) 3.6 (2 units)
Antenna packing weight (kg) 46.3 (Included clamps)
M ast diameter supported (mm) 50 - 115
Radome material Fiberglass
1999
1404
Radome colour Light grey
Operational temperature (℃) -40 .. +65
Frontal: 580 (at 150 km/ h)
Wind load (N) Lateral: 195 (at 150 km/ h)
M aximum: 700 (at 150 km/ h)
M ax. operational wind speed (km/ h) 200
Survival wind speed (km/ h) 250
Connector 8 x 4.3-10 Female
Connector position Bottom
60
Accessories
M echanical downtilt:
Downtilt kit ASM DT0D01 2.1 kg 1 (Separate packing)
0 - 12 °
Propert ies
RET type Integrated RET
RET protocols* AISG 2.0 / 3GPP
1LnH Band
Input voltage range (V) 10 - 30 DC
< 0.5 (when the motor does not work, 12 V)
Power consumption (W) < 4.5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 40 (typically, depending on antenna type)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET
antenna software interface is switchable between AISG 2.0/ 3GPP and AISG 1.1 with a vendor defined command.
For more details about protocol switching function, contact Huawei before system installation.
St andards: EN/ IEC 60950-1(Safety), EN/ IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission),
EN/ IEC 62368-1(Safety),ETSI EN 301 489, FCC Part15, ICES-003
Cert if icat ion: CE, FCC, IC, RCM , RoHS, REACH, WEEE
HWxxxx……r1 y1 y2 y3
HWxxxx……Cy2
HWxxxx……Ry3
r1
r - Red y - Yellow
L - Left array C - Center array
R - Right array
AQU4518R14v07
DXXXX-690-960/ 1710-2690/ 1710-2690/ 1710-2690-65/ 65/ 65/ 65-
15i/ 17.5i/ 17.5i/ 17.5i-M / M / M / M -R
EasyRET 1L3H 8-Port Ant enna w it h 4 Int egrat ed RCUs - 1.4m
Ant enna Specif icat ions
Elect rical Propert ies
690 - 960(r1) 1710 - 2690(Ry3)
Frequency range (M Hz)
690 - 803 790 - 862 824 - 894 880 - 960 1710 - 1990 1920 - 2200 2200 - 2490 2490 - 2690
Polarization +45° , -45° +45° , -45°
Electrical downtilt (°) 0 - 14 , continuously adjustable 2 - 12 , continuously adjustable
at mid Tilt 14.1 14.5 14.6 14.8 17.3 17.6 18.0 18.1
Gain (dBi)
over all Tilts 14.1 ± 0.5 14.5 ± 0.5 14.6 ± 0.5 14.7 ± 0.5 17.1 ± 0.5 17.4 ± 0.5 17.7 ± 0.4 17.8 ± 0.5
Horizontal 3dB beam width ( °) 66 ± 1.1 67 ± 0.8 65 ± 1.4 63 ± 3 66 ± 5.1 64 ± 5.3 60 ± 4.5 59 ± 4.7
Vertical 3dB beam width (°) 15.3 ± 1.0 13.7 ± 1.0 13.0 ± 0.7 12.0 ± 0.8 6.9 ± 0.6 6.2 ± 0.5 5.4 ± 0.4 5.1 ± 0.4
VSWR < 1.5 < 1.5
Cross polar isolation (dB) ≥ 28 ≥ 28
Interband isolation (dB) ≥ 28 ≥ 28
Front to back ratio , ± 30° (dB) > 24 > 25 > 25 > 24 > 25 > 25 > 28 > 26
Cross polar ratio (dB) 0° > 21 > 20 > 20 > 20 > 20 > 20 > 18 > 17
M ax. power per input (W) 500 (at 50℃ ambient temperature)* 250 (at 50℃ ambient temperature) *
Intermodulation IM 3 (dBc) ≤ -153 (2 x 43 dBm carrier) ≤ -153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC Ground
Horizontal 3dB beam width (°) 64 ± 6.3 63 ± 6.7 60 ± 6.1 59 ± 4.0 67 ± 5.3 65 ± 4.8 61 ± 3.5 60 ± 2.9
Vertical 3dB beam width ( °) 6.9 ± 0.5 6.2 ± 0.5 5.4 ± 0.4 5.1 ± 0.3 6.9 ± 0.6 6.2 ± 0.5 5.4 ± 0.5 5.1 ± 0.4
VSWR < 1.5 < 1.5
Cross polar isolation (dB) ≥ 28 ≥ 28
Interband isolation (dB) ≥ 28 ≥ 28
Front to back ratio , ± 30° (dB) > 25 > 25 > 28 > 26 > 25 > 26 > 28 > 27
Cross polar ratio (dB) 0° > 20 > 20 > 18 > 17 > 22 > 22 > 19 > 22
M ax. power per input (W) 250 (at 50℃ ambient temperature)* 250 (at 50℃ ambient temperature) *
Intermodulation IM 3 (dBc) ≤ -153 (2 x 43 dBm carrier) ≤ -153 (2 x 43 dBm carrier)
Impedance (Ω) 50 50
Grounding DC Ground DC Ground
(58)
Packing dimensions (H x W x D) (mm) 1790 x 435 x 240
Antenna weight (kg) 24.8
1LnH Band
Clamps weight (kg) 3.6 (2 units)
Antenna packing weight (kg) 35.0 (Included clamps)
M ast diameter supported (mm) 50 - 115
Radome material Fiberglass
Radome colour Light grey
1381
1499
Operational temperature (℃) -40 .. +65
Frontal: 425 (at 150 km/ h)
Wind load (N) Lateral: 140 (at 150 km/ h)
M aximum: 510 (at 150 km/ h)
M ax. operational wind speed (km/ h) 200
Survival wind speed (km/ h) 250
Connector 8 x 4.3-10 Female
Connector position Bottom
60
Accessories
M echanical downtilt:
Downtilt kit ASM DT0D01 2.1 kg 1 (Separate packing)
0 - 16 °
Propert ies
RET type Integrated RET
RET protocols* AISG 2.0 / 3GPP
Input voltage range (V) 10 - 30 DC
< 0.5 (when the motor does not work, 12 V)
Power consumption (W) < 4.5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 40 (typically, depending on antenna type)
4 x 8 pin connector according to IEC 60130-9
RET connector
Daisy chain in: M ale / Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
DC n/ c RS-485B n/ c RS-485A DC DC return n/ c
2.5 (10/ 350 μs)
Lightning protection (kA)
10 (8/ 20 μs)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET
antenna software interface is switchable between AISG 2.0/ 3GPP and AISG 1.1 with a vendor defined command.
For more details about protocol switching function, contact Huawei before system installation.
St andards: EN/ IEC 60950-1(Safety), EN/ IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission),
EN/ IEC 62368-1(Safety),ETSI EN 301 489, FCC Part15, ICES-003
Cert if icat ion: CE, FCC, IC, RCM , RoHS, REACH, WEEE
HWxxxx……r1
y1 y2 y3
HWxxxx……Cy2
HWxxxx……Ry3
r1
r - Red y - Yellow
L - Left array C - Center array
R - Right array
AQU4518R11v07
DXXXX-690-960/ 1695-2690/ 1695-2690/ 1695-2690-65/ 65/ 65/ 65-
16i/ 18i/ 18i/ 18i-M / M / M / M -R
EasyRET 1L3H 8-Port Ant enna w it h 4 Int egrat ed RCUs - 2.0m
Ant enna Specif icat ions
Elect rical Propert ies
690 - 960 1695 - 2690 (Ry3)
Frequency range (M Hz)
690 - 803 790 - 862 824 - 894 880 - 960 1695 - 1990 1920 - 2200 2200 - 2490 2490 - 2690
1LnH Band
Electrical downtilt (°) 2 - 12 , continuously adjustable , each band separately
at mid Tilt 15.4 15.8 15.9 16.2 17.4 17.8 18.0 18.4
Gain (dBi) 18.0
over all Tilts 15.3 ± 0.5 15.7 ± 0.5 15.8 ± 0.5 16.1 ± 0.5 17.3 ± 0.5 17.7 ± 0.5 17.8 ± 0.4
± 0.5
Side lobe suppression for first side
> 16 > 17 > 17 > 17 > 17 > 17 > 17 > 16
lobe above main beam (dB)
Horizontal 3dB beam width (°) 68 ± 3.0 65 ± 2.5 66 ± 3.5 63 ± 3.7 68 ± 4.5 66 ± 4.9 62 ± 3.7 60 ± 4.8
Vertical 3dB beam width ( °) 10.8 ± 1.0 9.5 ± 0.5 9.2 ± 0.4 8.5 ± 0.5 6.7 ± 0.5 5.9 ± 0.5 5.3 ± 0.5 4.8 ± 0.3
VSWR < 1.5 < 1.5
Cross polar isolation (dB) ≥ 28 ≥ 28
Interband isolation (dB) ≥ 28 ≥ 28
Front to back ratio , ± 30° (dB) > 25 > 25 > 25 > 25 > 25 > 25 > 26 > 25
Cross polar ratio (dB) 0° > 22 > 22 > 22 > 22 > 22 > 21 > 20 > 18
M ax. power per input (W) 400 (at 50℃ ambient temperature)* 250 (at 50℃ ambient temperature)*
Intermodulation IM 3 (dBc) ≤ -153 (2 x 43 dBm carrier) ≤ -153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC Ground
(535)
Antenna weight (kg) 30.0
Clamps weight (kg) 3.6 (2 units)
Antenna packing weight (kg) 46.3 (Included clamps)
M ast diameter supported (mm) 50 - 115
Radome material Fiberglass
1999
1404
Radome colour Light grey
Operational temperature ( ℃) -40 .. +65
Frontal: 580 (at 150 km/ h)
Wind load (N) Lateral: 195 (at 150 km/ h)
M aximum: 700 (at 150 km/ h)
M ax. operational wind speed (km/ h) 200
Survival wind speed (km/ h) 250
Connector 8 x 4.3-10 Female
60
Connector position Bottom
Accessories
It em M odel Descript ion Weight Unit s per ant enna
M echanical downtilt:
Downtilt kit ASM DT0D01 2.1 kg 1 (Separate packing)
0 - 12 °
Propert ies
RET type Integrated RET
RET protocols* AISG 2.0 / 3GPP
1LnH Band
Input voltage range (V) 10 - 30 DC
< 0.5 (when the motor does not work, 12 V)
Power consumption (W) < 4.5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 40 (typically, depending on antenna type)
4 x 8 pin connector according to IEC 60130-9
RET connector
Daisy chain in: M ale / Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
DC n/ c RS-485B n/ c RS-485A DC DC return n/ c
2.5 (10/ 350 μs)
Lightning protection (kA)
10 (8/ 20 μs)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET
antenna software interface is switchable between AISG 2.0/ 3GPP and AISG 1.1 with a vendor defined command.
For more details about protocol switching function, contact Huawei before system installation.
St andards: EN/ IEC 60950-1(Safety), EN/ IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission),
EN/ IEC 62368-1(Safety),ETSI EN 301 489, FCC Part15, ICES-003
Cert if icat ion: CE, FCC, IC, RCM , RoHS, REACH, WEEE
HWxxxx……r1
y1 y2 y3
HWxxxx……Cy2
HWxxxx……Ry3
r1
r - Red y - Yellow
L - Left array C - Center array
R - Right array
AQU4518R9v06
DXXXX-690-960/ 1695-2690/ 1695-2690/ 1695-2690-65/ 65/ 65/ 65-
17i/ 18i/ 18i/ 17.5i-M / M / M / M -R
EasyRET 1L3H 8-Port Ant enna w it h 4 Int egrat ed RCUs - 2.6m
Ant enna Specif icat ions
(591)
Packing dimensions (H x W x D) (mm) 2880 x 415 x 245
Ant enna weight (kg) 29.7
Clamps weight (kg) 3.6 (2 units)
Ant enna packing weight (kg) 45.2 (Included clamps)
Mast diameter supported (mm) 50 - 115
Radome material Fiberglass
Radome colour Light grey
Operational t emperature (℃) -40 .. +65
Front al: 825 (at 150 km/ h)
Wind load (N) Lateral: 240 (at 150 km/ h)
2528
1885
Accessories
It em M odel Descript ion Weight Unit s per ant enna
M echanical downtilt:
52
Propert ies
RET type Integrated RET
RET protocols* AISG 2.0 / 3GPP
1LnH Band
Input voltage range (V) 10 - 30 DC
< 0.5 (when the motor does not work, 12 V)
Power consumption (W) < 4.5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 40 (typically, depending on antenna type)
4 x 8 pin connector according to IEC 60130-9
RET connector
Daisy chain in: M ale / Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
DC n/ c RS-485B n/ c RS-485A DC DC return n/ c
2.5 (10/ 350 μs)
Lightning protection (kA)
10 (8/ 20 μs)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET
antenna software interface is switchable between AISG 2.0/ 3GPP and AISG 1.1 with a vendor defined command.
For more details about protocol switching function, contact Huawei before system installation.
St andards: EN/ IEC 60950-1(Safety), EN/ IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission),
EN/ IEC 62368-1(Safety),ETSI EN 301 489, FCC Part15, ICES-003
Cert if icat ion: CE, FCC, IC, RCM , RoHS, REACH, WEEE
HWxxxx………r1
r - Red y - Yellow
L - Left array R - Right array
T - Top array B - Bottom array
Horizontal 3dB beam width ( °) 69 ± 5.0 66 ± 5.0 58 ± 5.0 63 ± 5.0 62 ± 6.0 58 ± 5.3 58 ± 5.1
Vertical 3dB beam width ( °) 6.4 ± 0.5 5.8 ± 0.5 4.6 ± 0.3 6.5 ± 0.6 5.8 ± 0.5 5.1 ± 0.4 4.8 ± 0.3
VSWR < 1.5 < 1.5
Cross polar isolation (dB) ≥ 28 ≥ 28
Interband isolation (dB) ≥ 28 ≥ 28
Front to back ratio, ± 30° (dB) > 23 > 26 > 24 > 27 > 28 > 28 > 26
Cross polar ratio (dB) 0° > 22 > 21 > 20 > 22 > 19 > 17 > 21
M ax. power per input (W) 250 (at 50℃ ambient temperature)* 250 (at 50℃ ambient temperature)*
Intermodulation IM 3 (dBc) ≤ -150 (2 x 43 dBm carrier) ≤ -153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC Ground
(58)
Packing dimensions (H x W x D) (mm) 1790 x 435 x 240
1LnH Band
Antenna weight (kg) 26.3
Clamps weight (kg) 3.6 (2 units)
Antenna packing weight (kg) 38.4 (Included clamps)
M ast diameter supported (mm) 50 - 115
Radome material Fiberglass
Radome colour Light grey
1499
1381
Operational temperature (℃) -40 .. +65
Frontal: 425 (at 150 km/ h)
Wind load (N) Lateral: 140 (at 150 km/ h)
M aximum: 510 (at 150 km/ h)
M ax. operational wind speed (km/ h) 200
Survival wind speed (km/ h) 250
Connector 10 x 4.3-10 Female
60
Connector position Bottom
Accessories
It em M odel Descript ion Weight Unit s per ant enna
M echanical downtilt:
Downtilt kit ASM DT0D01 2.1 kg 1 (Separate packing)
0 - 16 °
Propert ies
RET type Integrated RET
RET protocols* AISG 2.0 / 3GPP
Input voltage range (V) 10 - 30 DC
< 0.5 (when the motor does not work, 12 V)
Power consumption (W) < 4.5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 40 (typically, depending on antenna type)
4 x 8 pin connector according to IEC 60130-9
RET connector
Daisy chain in: M ale / Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
DC n/ c RS-485B n/ c RS-485A DC DC return n/ c
2.5 (10/ 350 μs)
Lightning protection (kA)
10 (8/ 20 μs)s)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET
antenna software interface is switchable between AISG 2.0/ 3GPP and AISG 1.1 with a vendor defined command.
For more details about protocol switching function, contact Huawei before system installation.
St andards: EN/ IEC 60950-1(Safety), EN/ IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission),
EN/ IEC 62368-1(Safety),ETSI EN 301 489, FCC Part15, ICES-003
Cert if icat ion: CE, FCC, IC, RCM , RoHS, REACH, WEEE
HWxxxx……Cy2
b1
HWxxxx……Ry3 r1
1LnH Band
Electrical downtilt (°) 0 - 10 , continuously adjustable , each band separately
at mid Tilt 15.4 15.7 16.0 16.1 17.0 17.3 18.0
Gain (dBi)
over all Tilts 15.3 ± 0.5 15.6 ± 0.5 15.8 ± 0.5 16.0 ± 0.5 16.9 ± 0.4 17.2 ± 0.4 17.9 ± 0.5
Side lobe suppression for first side
> 17 > 17 > 17 > 17 > 17 > 17 > 16
lobe above main beam (dB)
Horizontal 3dB beam width ( °) 67 ± 2 67 ± 3 66 ± 3 64 ± 4 63 ± 4 61 ± 4 60 ± 5
Vertical 3dB beam width ( °) 10.3 ± 0.7 9.5 ± 0.5 9.2 ± 0.6 8.6 ± 0.5 6.4 ± 0.7 5.8 ± 0.4 4.9 ± 0.4
VSWR < 1.5 < 1.5 < 1.5
Cross polar isolation (dB) ≥ 28 ≥ 28 ≥ 28
Interband isolation (dB) ≥ 30 ≥ 30 ≥ 30
Front to back ratio , ± 30° (dB) > 23 > 24 > 24 > 24 > 25 > 26 > 24
Cross polar ratio (dB) 0° > 18 > 18 > 18 > 17 > 18 > 18 > 18
M ax. power per input (W) 500 (at 50℃ ambient temperature) 250 (at 50℃ ambient temperature)
Total power (W) 1000 (at 50℃ ambient temperature)
Intermodulation IM 3 (dBc) ≤ -153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC Ground
(637)
Packing dimensions (H x W x D) (mm) 2235 x 435 x 215
Antenna weight (kg) 26.5
Clamps weight (kg) 3.6 (2 units)
Antenna packing weight (kg) 36.5 (included clamps)
M ast diameter supported (mm) 50 - 115
Radome material Fiberglass
Radome colour Light grey
1310
1999
Accessories
52
M echanical downtilt:
Downtilt kit ASM DT0D01 2.1 kg 1 (Separate packing)
0 - 12 °
APE4518R19v06
DXXXXX-690-960/ 1695-2200/ 1695-2200/ 2490-2690/ 2490-2690-
65/ 65/ 65/ 65/ 65-16i/ 17.5i/ 17.5i/ 18i/ 18i-M / M / M / M / M -R
EasyRET 1L4H 10-Port Ant enna w it h 5 Int egrat ed RCUs - 2.0m
Propert ies
RET type Integrated RET
RET protocols* AISG 2.0 / 3GPP
Input voltage range (V) 10 - 30 DC
< 0.5 (when the motor does not work, 12 V)
Power consumption (W) < 4.5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 40 (typically, depending on antenna type)
4 x 8 pin connector according to IEC 60130-9
RET connector
Daisy chain in: M ale / Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
DC n/ c RS-485B n/ c RS-485A DC DC return n/ c
2.5 (10/ 350 μs)
Lightning protection (kA)
10 (8/ 20 μs)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET
antenna software interface is switchable between AISG 2.0/ 3GPP and AISG 1.1 with a vendor defined command.
For more details about protocol switching function, contact Huawei before system installation.
St andards: EN/ IEC 60950-1(Safety), EN/ IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission),
EN/ IEC 62368-1(Safety),ETSI EN 301 489, FCC Part15, ICES-003
Cert if icat ion: CE, FCC, IC, RCM , RoHS, REACH, WEEE
1LnH Band
Electrical downt ilt (°) 0 - 10 , cont inuously adjust able 2 - 12 , cont inuously adjustable , each band separately
Accessories
52
M echanical downtilt:
Downtilt kit ASM DT0D01 2.1 kg 1 (Separate packing)
0 - 12°
APE4516R1v06
DXXXXX-690-960/ 1695-2690/ 1695-2690/ 1695-2690/ 1695-2690-
65/ 65/ 65/ 65/ 65-16i/ 16.5i/ 16.5i/ 16i/ 16i-M / M / M / M / M -R
EasyRET 1L4H 10-Port Ant enna w it h 5 Int egrat ed RCUs - 2.0m
Propert ies
RET type Integrated RET
RET protocols* AISG 2.0 / 3GPP
Input voltage range (V) 10 - 30 DC
< 0.5 (when the motor does not work, 12 V)
Power consumption (W) < 4.5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 40 (typically, depending on antenna type)
4 x 8 pin connector according to IEC 60130-9
RET connector
Daisy chain in: M ale / Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
DC n/ c RS-485B n/ c RS-485A DC DC return n/ c
2.5 (10/ 350 μs)
Lightning protection (kA)
10 (8/ 20 μs)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET
antenna software interface is switchable between AISG 2.0/ 3GPP and AISG 1.1 with a vendor defined command.
For more details about protocol switching function, contact Huawei before system installation.
St andards: EN/ IEC 60950-1(Safety), EN/ IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission),
EN/ IEC 62368-1(Safety),ETSI EN 301 489, FCC Part15, ICES-003
Cert if icat ion: CE, FCC, IC, RCM , RoHS, REACH, WEEE
HWxxxx……LTy2
HWxxxx……RTy3
y1 r1 y4
HWxxxx……RBy4
HWxxxx……r1
r - Red y - Yellow
L - Left array R - Right array
T - Top array B - Bottom array
Pat t ern sam ple f or ref erence
1LnH Band
at mid Tilt 16.2 16.5 16.7 17.0
over all Tilt s 16.1 ± 0.5 16.3 ± 0.4 16.5 ± 0.4 16.8 ± 0.4
(591)
Packing dimensions (H x W x D) (mm) 2880 x 415 x 245
Ant enna weight (kg) 32.0
Clamps weight (kg) 3.6 (2 units)
Ant enna packing weight (kg) 47.5 (Included clamps)
Mast diameter supported (mm) 50 - 115
Radome material Fiberglass
Radome colour Light grey
Operational t emperature (℃) -40 .. +65
1885
2528
Accessories
It em M odel Descript ion Weight Unit s per ant enna
52
M echanical downtilt:
Downtilt kit ASM DT0D01 2.1 kg 1 (Separate packing)
0-8°
APE4517R0v06
DXXXXX-690-960/ 1695-2690/ 1695-2690/ 1695-2690/ 1695-2690-
65/ 65/ 65/ 65/ 65-17i/ 18i/ 18i/ 17.5i/ 17.5i-M / M / M / M / M -R
EasyRET 1L4H 10-Port Ant enna w it h 5 Int egrat ed RCUs - 2.6m
Int egrat ed RET Specif icat ions
Propert ies
RET type Integrated RET
RET protocols* AISG 2.0 / 3GPP
Input voltage range (V) 10 - 30 DC
< 0.5 (when the motor does not work, 12 V)
Power consumption (W) < 4.5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 40 (typically, depending on antenna type)
4 x 8 pin connector according to IEC 60130-9
RET connector
Daisy chain in: M ale / Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
DC n/ c RS-485B n/ c RS-485A DC DC return n/ c
2.5 (10/ 350 μs)
Lightning protection (kA)
10 (8/ 20 μs)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET
antenna software interface is switchable between AISG 2.0/ 3GPP and AISG 1.1 with a vendor defined command.
For more details about protocol switching function, contact Huawei before system installation.
St andards: EN/ IEC 60950-1(Safety), EN/ IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission),
EN/ IEC 62368-1(Safety),ETSI EN 301 489, FCC Part15, ICES-003
Cert if icat ion: CE, FCC, IC, RCM , RoHS, REACH, WEEE
HWxxxx……LBy1 y2 y3
HWxxxx……LTy2
HWxxxx……RTy3
y1 r1 y4
HWxxxx……RBy4
HWxxxx……r1
r - Red y - Yellow
L - Left array R - Right array
T - Top array B - Bottom array
Pat t ern sam ple f or ref erence
1LnH Band
Electrical downtilt (°) 2 - 12, continuously adjustable , each band separately
at mid Tilt 16.2 16.6 16.8 17.0 15.9 17.3 17.5 17.8 18.1
Gain (dBi)
over all Tilts 16.1 ± 0.5 16.5 ± 0.5 16.7 ± 0.5 16.9 ± 0.5 15.8 ± 0.5 17.1 ± 0.5 17.2 ± 0.5 17.5 ± 0.4 17.6 ± 0.5
Horizontal 3dB beam width ( °) 67 ± 2.5 65 ± 2.6 63 ± 2.1 61 ± 1.6 73 ± 6.0 69 ± 4.5 68 ± 4.7 63 ± 4.7 58 ± 4.0
Vertical 3dB beam width ( °) 8.9 ± 0.8 7.9 ± 0.4 7.7 ± 0.3 7.2 ± 0.3 8.0 ± 0.4 6.5 ± 0.6 5.9 ± 0.5 5.1 ± 0.4 4.8 ± 0.4
VSWR < 1.5 < 1.5 < 1.5
Cross polar isolation (dB) ≥ 28 ≥ 28 ≥ 28
Interband isolation (dB) ≥ 28 ≥ 28 ≥ 28
Front to back ratio , ± 30° (dB) > 24 > 26 > 26 > 26 > 22 > 23 > 23 > 27 > 24
Cross polar ratio (dB) 0° > 18 > 18 > 20 > 20 > 18 > 22 > 22 > 20 > 17
M ax. power per input (W) 500 (at 50℃ ambient temperature)* 250 (at 50℃ ambient temperature)*
Intermodulation IM 3 (dBc) ≤ -153 (2 x 43 dBm carrier) ≤ -153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC Ground
106
M echanical Propert ies
Antenna dimensions (H x W x D) (mm) 2769 x 369 x 149
Packing dimensions (H x W x D) (mm) 2965 x 435 x 240
(808)
Antenna weight (kg) 41.5
Clamps weight (kg) 5.8 (2 units)
Antenna packing weight (kg) 62.3 (Included clamps)
M ast diameter supported (mm) 50 - 115
Radome material Fiberglass
Radome colour Light grey
Operational temperature (℃) -40 .. +65
1901
2769
Frontal: 845 (at 150 km/ h)
Wind load (N) Lateral: 280 (at 150 km/ h)
M aximum: 1015 (at 150 km/ h)
M ax. operational wind speed (km/ h) 200
Survival wind speed (km/ h) 250
Connector 12 x 4.3-10 Female
Connector position Bottom
Accessories
It em M odel Descript ion Weight Unit s per ant enna
60
M echanical downtilt:
Downtilt kit ASM DT0F01 3.1 kg 1 (Separate packing)
0-8°
Propert ies
RET type Integrated RET
RET protocols* AISG 2.0 / 3GPP
1LnH Band
Input voltage range (V) 10 - 30 DC
< 0.5 (when the motor does not work, 12 V)
Power consumption (W) < 4.5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 40 (typically, depending on antenna type)
4 x 8 pin connector according to IEC 60130-9
RET connector
Daisy chain in: M ale / Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
DC n/ c RS-485B n/ c RS-485A DC DC return n/ c
2.5 (10/ 350 μs)
Lightning protection (kA)
10 (8/ 20 μs)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET
antenna software interface is switchable between AISG 2.0/ 3GPP and AISG 1.1 with a vendor defined command.
For more details about protocol switching function, contact Huawei before system installation.
St andards: EN/ IEC 60950-1(Safety), EN/ IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission),
EN/ IEC 62368-1(Safety),ETSI EN 301 489, FCC Part15, ICES-003
Cert if icat ion: CE, FCC, IC, RCM , RoHS, REACH, WEEE
HWxxxx……LBy1
HWxxxx……CBy3
y1 y3 y4
HWxxxx……RBy4
HWxxxx……RTy5 r1
HWxxxx……r1
r - Red y - Yellow
C - Center array L - Left array R - Right array
T - Top array B - Bottom array
M ult i-band
B - 4 2LnH
6 Port s - 2L1H
690-960/
14.5/ 14.5/ 0-14/ 0-14/
690-960/ 65/ 65/ 65
18 2-12
EasyRET2.0 6 x 4.3-10 1499 x 429 x 196 ATR4518R24v06 90 KK
1695-2690
690-960/
0-10/ 0-10/
690-960/ 65/ 65/ 65 16/ 16/ 18
2-12
EasyRET2.0 6 x 4.3-10 1999 x 429 x 196 ATR4518R25v06 92 KK
2LnH Band
1695-2690
690-960/
0-10/ 0-10/
690-960/ 65/ 65/ 65 17/ 17/ 18
2-12
EasyRET2.0 6 x 4.3-10 2550 x 429 x 196 ATR4518R26v06 94 KK
1695-2690
690-862/
14/ 14.5/ 0-12/ 0-12/
880-960/ 65/ 65/ 65
17.5 2-12
EasyRET2.0 6 x 4.3-10 1490 x 298 x 150 ATR4517R5v06 96 K
1710-2690
690-862/
0-10/ 0-10/
880-960/ 65/ 65/ 65 15.5/ 16/ 18
0-10
EasyRET2.0 6 x 4.3-10 1999 x 349 x 166 **ATR4518R40v06 98 KKK
1695-2690
8 Port s - 2L2H
690-960/
690-960/ 14.5/ 14.5/ 0-14/ 0-14/
1427-2690/
65/ 65/ 65/ 65
17.5/ 17.5 2-12/ 2-12
EasyRET2.0 8 x 4.3-10 1509 x 449 x 196 AQU4518R37v06 99 S
1427-2690
690-960/
690-960/ 16/ 16/ 0-10/ 0-10/
1427-2690/
65/ 65/ 65/ 65
17.5/ 17.5 2-12/ 2-12
EasyRET2.0 8 x 4.3-10 2099 x 449 x 196 AQU4518R36v06 101 S
1427-2690
690-960/
690-960/ 14.5/ 14.5/ 0-14/ 0-14/
1695-2690/
65/ 65/ 65/ 65
18/ 18 2-12/ 2-12
EasyRET2.0 8 x 4.3-10 1499 x 429 x 196 AQU4518R23v06 103 S
1695-2690
690-960/
690-960/ 16/ 16/ 0-10/ 0-10/
1695-2690/
65/ 65/ 65/ 65
18/ 18 2-12/ 2-12
EasyRET2.0 8 x 4.3-10 1999 x 429 x 196 AQU4518R24v06 105 S
1695-2690
690-960/
690-960/ 17/ 17/ 0-10/ 0-10/
1695-2690/
65/ 65/ 65/ 65
18/ 18 2-12/ 2-12
EasyRET2.0 8 x 4.3-10 2550 x 429 x 196 AQU4518R25v06 107 S
1695-2690
** Preliminary Issue
M ult i-band
B - 4 2LnH
690-960/
690-960/ 17/ 17/ 0-10/ 0-10/
1695-2690/
65/ 65/ 65/ 65
21/ 21 2-8/ 2-8
EasyRET2.0 8 x 4.3-10 2550 x 429 x 196 **AQU4521R2v06 109 S
1695-2690
690-862/
880-960/ 14/ 14.5/ 0-12/ 0-12/
1710-2690/
65/ 65/ 65/ 65
17.5/ 17.5 0-10/ 0-10
EasyRET2.0 8 x 4.3-10 1499 x 359 x 178 AQU4517R4v06 111 R
1710-2690
690-862/
880-960/ 15.5/ 16/ 0-10/ 0-10/
1695-2690/
65/ 65/ 65/ 65
18/ 18 0-10/ 0-10
EasyRET2.0 8 x 4.3-10 1999 x 349 x 166 AQU4518R30v07 113 RR
1695-2690
690-862/
880-960/ 16.5/ 17/ 0-10/ 0-10/
1695-2690/
65/ 65/ 65/ 65
18/ 18 0-10/ 0-10
EasyRET2.0 8 x 4.3-10 2528 x 349 x 166 **AQU4518R58v06 115 RR
1695-2690
10 Port s - 2L3H
690-960/
690-960/ 0-14/ 0-14/
65/ 65/ 65/ 14.5/ 14.5/
1427-2690/
65/ 65 17.5/ 18/ 18
2-12/ 2-12/ EasyRET2.0 10 x 4.3-10 1499 x 469 x 206 APE4518R13v06 116 WW
1695-2690/ 2-12
1695-2690
690-960/
690-960/ 0-10/ 0-10/
65/ 65/ 65/ 16/ 16/
1427-2200/
65/ 65 17.5/ 18/ 18
2-12/ 2-12/ EasyRET2.0 10 x 4.3-10 1999 x 469 x 206 APE4518R14v06 119 W4
1695-2690/ 2-12
1695-2690
690-960/
690-960/ 17/ 17/ 2-12/ 2-
65/ 65/ 65/
1427-2690/
65/ 65
17.5/ 18/ 12/ 2-12/ 2- EasyRET2.0 10 x 4.3-10 2550 x 469 x 206 APE4518R30v06 122 WW
1695-2690/ 18 12/ 2-12
1695-2690
690-862/
880-960/ 16.5/ 17/ 0-10/ 0-10/
65/ 65/ 65/
1710-2690/
65/ 65
17.5/ 18/ 0-10/ 0-10/ EasyRET2.0 10 x 4.3-10 2769 x 359 x 178 APE4518R12v06 125 W2
1710-2690/ 18 0-10
1710-2690
** Preliminary Issue
M ult i-band
B - 4 2L4H
12 Port s - 2L4H
3dB
Frequency Electrical Array
Horizontal Gain (dBi) Tilt Method Connector Dimension(mm) Model Page
Range (MHz) Downtilt ( o) symbol
Beam Width ( o)
2LnH Band
2x690-960/
17/ 17/ 17. 2-12/ 2-12/
2x1427- 65/ 65/ 65/
2690/ 65/ 65/ 65
5/ 17.5/ 17. 2-12/ 2-12/ EasyRET2.0 12 x 4.3-10 2769 x 449 x 196 ASI4518R36v06 130 Z
5/ 17.5 2-12/ 2-12
2x1695-2690
2x690-960/
14.5/ 14.5/ 0-14/ 0-14/
2x1695- 65/ 65/ 65/
2200/ 65/ 65/ 65
17/ 17/ 2-12/ 2-12/ EasyRET2.0 12 x 4.3-10 1499 x 429 x 196 ASI4518R14v06 133 X3
17.5/ 17.5 2-12/ 2-12
2x2490-2690
690-862/
880-960/
14/ 14.5/ 2-16/ 2-16/
1427-2690/ 65/ 65/ 65/
1695-2200/ 65/ 65/ 65
17.5/ 17/ 2-12/ 2-12/ EasyRET2.0 12 x 4.3-10 1499 x 369 x 149 ASI4518R41v06 139 Y2
17.5/ 17.5 2-12/ 2-12
2490-2690/
1695-2690
** Preliminary Issue
M ult i-band
B - 4 2L4H
12 Port s - 2L4H
3dB
Frequency Electrical Array
Horizontal Gain (dBi) Tilt Method Connector Dimension(mm) Model Page
Range (MHz) Downtilt ( o) symbol
Beam Width ( o)
690-862/
880-960/
15/ 15.5/ 2-12/ 2-12/
1427-2690/ 65/ 65/ 65/
1695-2690/ 65/ 65/ 65
17.5/ 17.5/ 2-12/ 2-12/ EasyRET2.0 12 x 4.3-10 1999 x 369 x 149 ASI4518R32v06 142 Y2
17/ 17.5 2-12/ 2-12
1695-2200/
2490-2690
2x690-960/
14.5/ 14.5/ 0-14/ 0-14/
2x1427- 65/ 65/ 65/
2690/ 65/ 65/ 65
17.5/ 17.5/ 2-12/ 2-12/ EasyRET2.0 12 x 4.3-10 1509 x 469 x 206 ASI4518R37v06 148 Y3
17.5/ 17.5 2-12/ 2-12
2x1695-2690
** Preliminary Issue
M ult i-band
B - 4 2LnH
14 Port s - 2L5H
Frequency
3dB Horizontal Electrical Array
Range (MHz) Gain (dBi) Tilt Method Connector Dimension(mm) Model Page
Beam Width ( o) Downtilt ( o) symbol
158
690-960/
14.5/ 14.5/ 0-14/ 0-14/
690-960/
17.5/ 17/ 2-12/ 2-12/
1427-2690/ 7 x 65
17/ 17.5/ 2-12/ 2-12/
EasyRET2.0 14 x 4.3-10 1499 x 469 x 206 AHP4518R3v06 158 Z5
2*1695-2200/
17.5 2-12
2*2490-2690
690-960/
16/ 16/ 0-10/ 2-12/
690-960/
2LnH Band
17.5/ 17/ 2-12/ 2-12/
1427-2690/ 7 x 65
17/ 17.5/ 2-12/ 2-12/
EasyRET2.0 14 x 4.3-10 1999 x 469 x 206 AHP4518R4v06 161 Z5
2*1695-2200/
17.5 2-12
2*2490-2690
690-862/
14/14.5/ 2-16/2-16/
880-960/
17.5/17/ 2-12/2-12/
1427-2690/ 7 x 65
17/17.5/ 2-12/2-12/
EasyRET2.0 14 x 4.3-10 1499 x 369 x 149 AHP4517R1v06 171 W6
2*1695-2200/
17.5 2-12
2*2490-2690
690-862/
15/ 15.5/ 2-12/ 2-12/
880-960/
17.5/ 17/ 2-12/ 2-12/
1427-2690/ 7 x 65
17/ 17.5/ 2-12/ 2-12/
EasyRET2.0 14 x 4.3-10 1999 x 369 x 149 AHP4517R0v07 175 W6
2*1695-2200/
17.5 2-12
2*2490-2690
** Preliminary Issue
M ult i-band
B - 4 2LnH
16 Port s - 2L6H
Frequency 3dB Horizontal Electrical Array
Gain (dBi) Tilt Method Connector Dimension(mm) Model Page
Range (MHz)Beam Width ( o) Downtilt ( o) symbol
20 Port s - 2L8H
** Preliminary Issue
M ult i-band
B - 4 2LnH
LTy1
LBy2 Ry3
2LnH Band
Type K Type W6 Type W7 Type X3 Type Y Type Z Type Z5 Type Z7
r r1 r2 r1
y1 y2 y1 y2 y1 y3
y2 y5
y2 y4 y6 y2 y4 y2 y4
y y3 y2
y1 y3 y5 y1 y3 y1 y3 y1 y3 y4
b1 b2
b1 b2 b1 b2
rr r2 r1 r1 r2 r2 r1 r2 r1 r2
y2 y4 y6 y2 y5
y1 y3 y5 y1 y4
b1 b1 b2
b1 b2
r2 Lr1 Rr2 r1 r2
r1 r2 r1 r2 r1 r2 r2