®

Dispercoll U 54

Characterization Anionic high-molecular-weight polyurethane dispersion.

®
Dispercoll U 54 is a raw material for the formulation of thermally
activated adhesives for use in, for example, the furniture, automotive,
shoe and construction industries. Its characteristic polymer structure makes
®
Dispercoll   U  54 particularly well suited for applications on PVC substrates
containing plasticizers.
Form supplied approx. 50 % in water
Appearance Milky white

Specification
Property Value Unit of measurement Method
Non-volatile content 49 - 51 % DIN EN ISO 3251
(1g / 1h / 125 °C)
Viscosity at 23 °C, 40 - 600 mPa·s DIN 53 019
spindle L 2 / 30 rpm
pH-value 6.0 - 9.0 DIN ISO 976

Other data*
Property Value Unit of measurement Method
Density at 20 °C approx. 1.1 g/cm
3 DIN 51 757
Minimum film-forming temperature approx. 5 °C DIN ISO 2115
*These values provide general information and are not part of the product specification.

page 1 of 3
Edition 2015-09-01
Replaces edition dated 2013-07-01 Product Datasheet
 ®
Dispercoll U 54

Properties / Applications ®
Dispercoll U 54 has outstanding bonding properties on most synthetic
and natural materials. The thermal stability and resistance to plasticisers,
grease and oil can be increased by the addition of 2  –  5  % by weight
®
of a water-emulsifiable polyisocyanate from the Desmodur range. The
crosslinker is added just before application of the adhesive and mixed
thoroughly. Attention should be paid to the pot life of the formulation. In
order to customise other application-specific and technical properties, resin
dispersions, emulsifiers and thickeners may also be added. Before application,
especially by spraying, the product should be filtered to remove any polymer
particles which may have formed by initial drying.
®
For heat activation bonding applications with Dispercoll U 54, a bond line
temperature in the range of approx. 60  – 70 °C or even higher is recommended
to allow the dried adhesive layer to be fully activated for bonding. The actual
temperature needed for a specific application will depend on the time in the
press, the pressure applied and the substrates being bonded.
Storage - Storage in original sealed Covestro containers.

- Recommended storage temperature: 5 - 23 °C, temperatures higher than

  30 °C should be avoided.

- Protect from direct sunlight, frost, heat and foreign material.

General information: The product is sensitive to frost. Freezing can damage

the product irreversibly. Prolonged storage at higher temperatures may affect
the product properties and possibly resulting in sedimentation or coagulation.
Containers must be kept sealed and protected from direct sunlight as
otherwise the evaporation of water will result in the formation of a
non-redispersible polymer film.
Contamination with certain bacteria, fungi or algae may render the product
unusable.

page 2 of 3
Edition 2015-09-01
Replaces edition dated 2013-07-01 Product Datasheet
 ®
Dispercoll U 54

Storage time Covestro represents that, for a period of six months following the day
of shipment as stated in the respective transport documents, the product
will meet the specifications or values set forth in section "specifications or
characteristic data" above, what ever is applicable, provided that the product is
stored in full compliance with the storage conditions set forth in and referenced
under section "storage" above and is otherwise handled appropriately.
The lapse of the six months period does not necessarily mean that the product
no longer meets specifications or the set values. However, prior to using said
product, Covestro recommends to test such a product if it still meets the
specifications or the set values. Covestro does not make any representation
regarding the product after the lapse of the six months period and Covestro
shall not be responsible or liable in any way for the product failing to meet
specifications or the set values after the lapse of the six months period.
Labeling and statutory requirements This product data sheet is only valid in conjunction with the latest edition of the
corresponding Safety Data Sheet. Any updating of safety-relevant information
– in accordance with statutory requirements – will only be reflected in the Safety
Data Sheet, copies of which will be revised and distributed. Information relating
to the current classification and labeling, applications and processing methods
and further data relevant to safety can be found in the currently valid Safety
Data Sheet.

The manner in which you use and the purpose to which you put and utilize our products, technical assistance and information (whether verbal,
written or by way of production evaluations), including any suggested formulations and recommendations, are beyond our control. Therefore, it is
imperative that you test our products, technical assistance, information and recommendations to determine to your own satisfaction whether our
products, technical assistance and information are suitable for your intended uses and applications. This application-specific analysis must at least
include testing to determine suitability from a technical as well as health, safety, and environmental standpoint. Such testing has not necessarily been
done by Covestro. Unless we otherwise agree in writing, all products are sold strictly pursuant to the terms of our standard conditions of sale which
are available upon request. All information and technical assistance is given without warranty or guarantee and is subject to change without notice.
It is expressly understood and agreed that you assume and hereby expressly release us from all liability, in tort, contract or otherwise, incurred in
connection with the use of our products, technical assistance, and information. Any statement or recommendation not contained herein is unauthorized
and shall not bind us. Nothing herein shall be construed as a recommendation to use any product in conflict with any claim of any patent relative to
any material or its use. No license is implied or in fact granted under the claims of any patent.
This product is not designated for the manufacture of a medical device or of intermediate products for medical devices1). [This product is also not
designated for other specifically regulated applications (e.g. including cosmetics, plant protection, fertilisers, plant strengtheners, food processing, food
contact and others). If the intended use of the product is for the manufacture of a medical device or of intermediate products for medical devices or
for other specifically regulated applications Covestro must be contacted in advance to provide its agreement to sell such product for such purpose.]
Nonetheless, any determination as to whether a product is appropriate for use in a medical device or intermediate products for medical devices, for Food
Contact products or cosmetic applications must be made solely by the purchaser of the product without relying upon any representations by Covestro.
1) Please see the "Guidance on Use of Covestro Products in a Medical Application" document.
Edition: January, 2018
Editor: Coatings, Adhesives & Specialties
Covestro Deutschland AG
Kaiser-Wilhelm-Allee 60 Contact:
51373 Leverkusen, Germany CAS Single Point of Contact EMEA
www.covestro.com e-mail: cas_spoc_emea@covestro.com
page 3 of 3
Edition 2015-09-01
Replaces edition dated 2013-07-01 Product Datasheet