Version 12th

tweleth
GRANITE SURFACE PLATES
Microflat Granite Surface Plates provide a very accurate reference plane for work inspection and for marking. Their high degree of
Flatness, superior physical properties & workmanship make them ideal bases for mounting sophisticated mechanical, electronic and
optical gauging systems. The overall flatness specifications of Microflat Granite Surface Plates meet and exceed the requirements set
forth by various National and International Standards like IS, DIN, BS, US Federal Specification GGG etc.

SALIENT FEATURES:
Ÿ Made from Indian Black Granite having natural grains and lines.

Ÿ Top Surface Hand Lapped, Side Faces Polished and Botttom Face Sawn
Finish
Ÿ Made generally as per IS-7327-2003. Also available conforming to other
standards like DIN-876, BS-817, US Federal Specification GGG-P-463-C.
Ÿ Calibration: Each Surface Plate provided with Calibration Certificate
traceable to National Standards as per ISO 17025
Ÿ Cover: Rexine cover provided for top working surface with each Surface Metallic T-Slot Metallic Threaded Insert
Plate
Ÿ Other features like Holes, Counter Bored Holes, Metallic Threaded Inserts,
Ÿ Metallic T-Slots, Notch can be provided as per customer requirement.

Standard Sizes and Flatness Accuracies Standard Sizes and Flatness Accuracies
Sizes in mm Flatness as per IS 7237 (µm) Sizes in mm Flatness as per IS 7237 (µm)
LxWxT Gr-0 Gr-1 Gr-2 LxWxT Gr-0 Gr-1 Gr-2
250 x 250 3.5 7.0 15.0 750 x 750 5.5 11.0 22.0
400 x 250 4.0 8.0 16.0 1200 x 800 7.0 14.0 28.0
400 x 400 4.5 9.0 17.0 1200 x 900 7.0 14.0 28.0
630 x 400 5.0 10.0 20.0 1200 x 1200 7.5 15.0 30.0
630 x 630 5.0 10.0 21.0 1500 x 1500 9.0 18.0 36.0
1000 x 630 6.0 12.0 24.0 1800 x 1200 9.0 18.0 36.0
1000 x 1000 7.0 14.0 28.0 3000 x 600 11.5 23.0 46.0
1600 x 1000 8.0 16.0 33.0 3000 x 1000 12.0 24.0 48.0
2000 x 1000 9.5 19.0 38.0 3000 x 1500 12.5 25.0 50.0
2000 x 1500 10.0 20.0 40.0 3000 x 2000 13.0 26.0 52.0
2000 x 2000 11.0 22.0 44.0 3500 x 2000 14.5 29.0 58.0
2500 x 1000 10.5 21.0 42.0 4000 x 1000 15.0 30.0 60.0
2500 x 1500 11.5 23.0 46.0 4000 x 1500 15.5 31.0 62.0
2500 x 2000 12.0 24.0 48.0 4000 x 2000 16.0 32.0 64.0
Other sizes on request Other sizes on request

Pg - 2
MICROFLAT CAST IRON SURFACE PLATES
Cast Iron Surface Plates provide a precision reference for spotting, tool making, inspection of parts,
and for many types of gauging and marking out operations:

SALIENT FEATURES: STANDARD SIZES AND TOLERANCE OF FLATNESS

Ÿ Made from Grey Iron Casting Conforming to Grade FG-220 of IS Sizes in mm Overall Flatness in µm
210, casting duly stress relieved.
(L x B) Grade-0 Grade-1 Grade-2
Ÿ Top working surface offered precision hand-scrapped finish.
250 x 250 3.5 7.0 15.0
Ÿ Made generally as per IS-2285-2003.
400 x 250 4.0 8.0 16.0
Ÿ Calibration: Each Surface Plate provided with Calibration
Certificate traceable to National Standards as per ISO 17025 400 x 400 4.5 9.0 17.0

Ÿ Cover: Rexine cover provided for top working surface with each 630 x 400 5.0 10.0 20.0
Surface Plate 630 x 630 5.0 10.0 21.0
Ÿ Small Surface Plates up to 630 x 630 mm provided with Mild Steel 1000 x 630 6.0 12.0 24.0
handles for lifting, larger Surface Plates without handles but 1000 x 1000 7.0 14.0 28.0
provided with cored holes in periphery for lifting mechanically.
1600 x 1000 8.0 16.0 33.0
Ÿ Additional Features like Grid Lines for location, tapped holes,
2000 x 1000 9.5 19.0 38.0
T-Slots etc can also be provided on request.
2000 x 1500 10.0 20.0 40.0
3000 x 1500 - 25.0 50.0
3000 x 2000 - 26.0 52.0
Other sizes on request

MICROFLAT GRANITE SURFACE CLEANER

Special product for cleaning and maintaining granite surfaces. It's special formula avoids stick slip movement
and assures ease of sliding workpieces and measuring instruments on the Granite Surface.

STANDS FOR SURFACE PLATES

Ÿ Stands for Surface Plates are provided with adjustable non rotatable leveling screws.
Ÿ Stands can also be offered with Castor Wheels on request
Ÿ Stands can also be offered with Vibration Isolation Pads on request.

M.S Fabricated Stand With Cupboard CI Column Type Stands M.S Fabricated Stand

Pg - 3
MICROFLAT INSPECTION BENCH CENTERS
Bench Centers are used for inspection of Cylindrical Jobs which are held between precision co-axial centers for various
parameters like Radial Run-out, Axial Runout, Total Indicated Runout (TIR) etc.

SALIENT FEATURES:
Ÿ Made generally conforming to IS-5980-1978

Ÿ Available in Cast Iron Base and Granite Base.

Ÿ Cast Iron Base and Center Bodies made from close grained Grey Iron Castings of Gr FG-220 of IS-210, duly stress relieved.

Ÿ Center Bodies provided with Hardened and Ground Sleeves and Dead Centers having 60 degree nose angle.

Ÿ Head Stock having fixed sleeve while Tail Stock provided with retractable sleeve (20 mm sleeve travel) which is spring loaded to
ensure uniform pressure on work pieces and easy loading and unloading.
Ÿ Axis of Centers are provided Co-Axial in Horizontal as well as Vertical Planes.

A. Standard Horizontal Bench Center

Cast Iron Base Granite Base

Standard Horizontal Bench Center (Cast Iron Base & Granite Base)
o ABC = Admit Between Center o HC = Height of Center
ABC (mm) HC (mm) Co-Axiality (µm) ABC (mm) HC (mm) Co-Axiality (µm)
300 125 / 160 15 300 200 / 250 / 300 20
500 125 / 160 15 500 200 / 250 / 300 20
750 125 / 160 20 750 200 / 250 / 300 40
1000 125 / 160 20 1000 200 / 250 / 300 40
1250 125 / 160 20 1250 200 / 250 / 300 40
1500 125 / 160 20 1500 200 / 250 / 300 40
2000 125 / 160 30 2000 200 / 250 / 300 40
2500 125 / 160 30 2500 200 / 250 / 300 40
3000 125 / 160 30 3000 200 / 250 / 300 40
Other sizes on request.

B. Special Bench Centers:

Bench Center with longitudinal & cross movement Bench Center with Slide

Pg - 4
C. Light Duty Horizontal Bench Center
Ÿ Light Duty Bench Center is having all features similar to standard horizontal bench centers.
Ÿ Light in weight for easy handling.

Light Duty Horizontal Bench Center (Cast Iron Base)

ABC (mm) HC (mm) Co-Axiality (µm)
100 75 / 100 / 125 / 150 10
200 75 / 100 / 125 / 150 10
300 75 / 100 / 125 / 150 15
400 75 / 100 / 125 / 150 15
500 75 / 100 / 125 / 150 15
Other sizes on request.

D. Vertical Bench Center

Ÿ Vertical Bench Center is provided with Ball Screw and Guideways for moving the center attachment
Ÿ Can be used as Vertically as well as Horizontally.
Ÿ Bottom center is fixed while other center provided with spring loaded sleeve
Ÿ Provided with fine adjustment knob for movement of sleeve.

Vertical Bench Center with Ball Screw & Guideways

ABC (mm) HC (mm) Co-Axiality (µm)
200 75 / 100 / 125 / 150 10
300 75 / 100 / 125 / 150 10
400 75 / 100 / 125 / 150 15
500 75 / 100 / 125 / 150 15
750 75 / 100 / 125 / 150 15
Other sizes on request.

E. Mini Bench Center - Vertical cum Horizontal

Ÿ Light in weight for easy handling.
Ÿ Dead Centers aligned in V-Guide.

Mini Bench Center: Vertical cum Horizontal

ABC (mm) HC (mm) Co-Axiality (µm)
250 50 / 75 / 100 10
300 50 / 75 / 100 10
400 50 / 75 / 100 15
Other sizes on request.

F. Universal Bench Center

For checking Concentricity, Parallelism, Axial Run-out, Taper Angle and
Taper form for workpieces held between centers. Sine Rollers allow quick
and easy taper Angle and Taper form measurements in conjunction with
Gauge Blocks. Can be used horizontally as well as vertically

Universal Bench Centers

ABC HC Center distance of Co-Axiality of Parallelism
(mm) (mm) Sine Rollers (mm) Centers (µm) of Axis (µm)

0 - 200 75 400 ± 0.005 5 5

0 - 300 75 500 ± 0.005 5 5
Other sizes on request

Pg - 5
MICROFLAT GEAR PCD RUNOUT CHECKING ATTACHMENT
An economical and versatile fixture to be used along with Inspection Bench Centers for checking PCD of Spur/Helical Gears with
reference to the Gear Axis. Provided with a set of 3 suitable hardened and profile ground locking balls to suit the modules between 1.5 to
7 and corresponding diametrical pitches of Gear Spring Loaded bracket holding locking balls is mounted on a slide, which can be
locked in any position to suit varying diameters.

MICROFLAT CONCENTRICITY CHECKING ATTACHMENT

This is an ideal attachment, which is to be used along with Bench Centers or T-slotted Surface Plates for checking concentricity of stepped
shafts and spindles.

SALIENT FEATURES:
Ÿ Consisting of a pair of V-Blocks that are having adjustable height
Ÿ Provided with Hardened and Ground Roller pins on V-Blocks for point contact
Ÿ Height adjustment of V-Blocks is done using fine pitch screws
Ÿ Setting Mandrels for alignment of Axis of ‘V’s available on request.

Concentricity Tester with Dovetail Guideways Concentricity Tester with CI adjustable V-Blocks

Concentricity Tester with Ball Screws & Guideways Concentricity Tester with Roller Bearing V-Blocks

Pg - 6
MICROFLAT SURFACE PLATES WITH CENTER ATTACHMENTS
This equipment can be used as a Precision Inspection Bench Center as well as a Surface Plate (two-in-one) with high Grade of
accuracy. Material of construction and accuracy parameters as per IS-2285-2003 for Cast Iron Surface Plate, IS-7327-2003 for
Granite Surface Plate and IS-5980-78 for Center Attachments.

Granite Surface Plate with Center Attachments Cast Iron Surface Plate with Center Attachments

Granite & Cast Iron Surface Plates with Center Attachments

Size of Surface Plate Maximum Admit Height of Centers

L x B (mm) Between Centers (mm) (mm)

1000 x 630 500 125 / 160 / 200 / 250 / 300

1000 x 1000 500 125 / 160 / 200 / 250 / 300
1200 x 900 700 125 / 160 / 200 / 250 / 300
1600 x 1000 1100 125 / 160 / 200 / 250 / 300
2000 x 1000 1500 125 / 160 / 200 / 250 / 300
3000 x 1000 2500 125 / 160 / 200 / 250 / 300
Other sizes on request

Bench Center Accessories

Ÿ Granite Sliding Fixture for mounting dial stand
Ÿ Steady Rests for Slander Jobs.
Ÿ Additional ‘V’ aligned and matched on top of Centers
Ÿ Pipe Centers for holding hollow jobs
Ÿ Carbide Tipped Dead Centers
Ÿ Taper and Parallel Test Mandrels
Ÿ M.S Fabricated Stand with leveling screws
Ÿ Steady Rest for extra long and heavy job
Ÿ Special Bench Center Bodies with live spindle
Ÿ Pneumatic Sleeve Travel for ease of loading & unloading Pipe Center Pipe Center - Blunt Nose

Steady Rest Granite Sliding Fixture Pneumatic Sleeve Travel

Pg - 7
MICROFLAT CAST IRON ANGLE PLATES
They are used for clamping and work holding in vertical position and as vertical reference for layout, machining and inspection.
They make an ideal fixture for shaping, planning, milling, grinding, horizontal boring and drilling operation.

SALIENT FEATURES:
Ÿ Made from close grained Grey Iron Castings conforming to Grade FG-220 of IS-210.
Ÿ Working surfaces are hand scrapped finish to required grade of accuracy
Ÿ Slotted & Webbed Angle Plate: having cored slots on both the working faces.
Ÿ T-Slotted Angle Plate: Vertical face is provided with horizontally machined T-slots & the base/table face having cored slots.
Ÿ Box Angle Plates: A job can be fixed with one of the faces and rotated in five planes without the need for repositioning or
disturbing accuracy. Provided with machined T-slots on one face and cored elongated slots on four opposite faces.
Ÿ Box Angle Plates in matched pairs can be offered on request at extra cost.
Ÿ Angle Plates and Box Angle Plates are also offered in Precision Grade as per IS-6973-1973 and IS-6985 respectively which are
having accuracies almost half to that of IS-2554-1971.

Slotted and Webbed Angle Plate T-Slotted Angle Plate

Large Angle Plate with Cross T-Slots Box Angle Plate

Cast Iron Angle Plates as per IS-2554-1971

Flatness of working Squareness of working Parallelism of opp. T-Slot Details for

Sizes T-Slotted Angle Plate
LxBxH faces (µm) faces over ‘H’ (µm) edge faces (µm) (mm)
(mm)
GR-1 GR-2 GR-1 GR-2 GR-1 GR-2 Size No Pitch
125 x 75 x 100 5 25 10 50 13 63 10 2 40
175 x 100 x 125 5 25 13 50 15 63 12 2 50
250 x 150 x 175 8 38 15 75 18 88 12 3 50
350 x 200 x 250 8 38 18 75 20 88 14 3 80
450 x 300 x 350 10 50 18 100 20 113 18 3 100
600 x 400 x 450 10 50 20 100 23 113 18 4 100
700 x 420 x 700 - 50 - 140 - 160 18 7 100
600 x 600 x 1000 - 50 - 140 - 160 18 10 100
Other sizes on request

Pg - 8
 Cast Iron Box Angle Plates as per IS-6232-1971

Sizes Flatness of working Squareness of Parallelism of T-Slot Details

LxBxH faces (µm) working faces (µm) working faces (µm) (mm)
(mm)
GR-1 GR-2 GR-1 GR-2 GR-1 GR-2 Size No Pitch
125 x 75 x 100 5 25 10 50 13 63 12 2 70
175 x 100 x 125 5 25 13 50 15 63 12 3 56
250 x 150 x 175 8 38 15 75 18 88 14 4 65
350 x 200 x 250 8 38 18 75 20 88 18 4 80
450 x 300 x 350 10 50 18 100 20 113 18 5 80
600 x 400 x 450 10 50 20 100 23 113 18 5 100
Other sizes on request

MICROFLAT CAST IRON SWIVEL ANGLE PLATES

Swivel Angle Plates are used for quick setting of Jobs at desired angle. They are graduated for setting 0-90º & can be easily adjusted
manually and locked in adjusted position using two locking nuts. Swivelling face is provided with machined T-Slots. Other face is
provided with cored elongated slots for clamping the Angle Plate on the Machine Table.

SALIENT FEATURES:
Ÿ Made from close grained Cast Iron Casting conforming to Grade FG-220 of IS-210. Casting duly stress relieved.
Ÿ Working faces flat within 0.010 mm per 300 mm and square and parallel within ± 0.04 mm per 300 mm in two extreme positions.
Ÿ Edges parallel and square within 0.05 mm per 300 mm
Ÿ T-slots parallel to the edges within 0.05 mm per 300 mm.

Size (mm) Details of T-slots

LxBxH Size of T-slot No. of T-slot Pitch of T-slot
200 x 150 x 150 14 3 40
300 x 250 x 250 14 4 63
400 x 300 x 300 14 4 63
500 x 400 x 400 14 4 100
600 x 400 x 400 14 4 100
Other sizes on request

MICROFLAT CAST IRON TILTING TABLES

Tilting Table is useful for setting work at angle for machining operations. Table can be tilted up to 45º angle on either side. Graduation on
degree scale are provided on end face. Table can be locked at a set position by using locking clamps.

SALIENT FEATURES:
Ÿ Made from close grained plain Cast Iron Castings conforming to Grade FG-220 of IS-210. Casting duly stress relieved.
Ÿ Table top and base are flat and parallel within 0.05 mm per 300 mm
Ÿ T-slots are parallel to the edge of the table and the cylindrical base within 0.05 mm per 300 mm.
Ÿ T-slots parallel to the edges within 0.05 mm per 300 mm

Size (mm) Details of T-slots

LxBxH Size of T-slot No. of T-slot Pitch of T-slot
300 x 150 x 110 14 3 50
400 x 300 x 200 14 3 100
450 x 225 x 150 14 3 65
500 x 500 x 300 14 4 125
600 x 300 x 200 14 3 100
1000 x 500 x 300 14 4 100

Other sizes on request

Pg - 9
MICROFLAT V-BLOCKS
V-Blocks are widely used in Workshops, Tool Rooms & Standard Rooms for variety of application in Tooling and Inspection
purposes such as marking accurate Centers, checking Concentricity, Parallelism, etc.

SALIENT FEATURES:
Ÿ Cast Iron V-Blocks made from Grey Iron Castings of Grade FG-220 of IS-210, offered duly hand-scrapped finish.
Ÿ Steel V-Blocks are made from hardened & ground alloy steel having hardness 55 - 60 HRC.
Ÿ Granite V-Blocks made from good quality Granite, working faces offered lapped finish having included Angle 90º± 5’
Ÿ Clamps offered for Plain V-Blocks (Cast Iron, Steel & Granite V-Blocks) on request.

Cast Iron Plain V-Block Granite V-Block Hardened & Ground Steel V-Block

CI, STEEL & GRANITE V-BLOCKS (IS-2949-74) STEEL V-BLOCKS (IS-2949-1992)

Size in mm Clamping Size in mm Clamping
(W x L x H) Range (mm) (W x L x H) Range (mm)
40 x 50 x 40 5 - 40 40 x 50 x 40 4 - 40
50 x 50 x 50 5 - 50 40 x 75 x 40 6 - 40
50 x 63 x 50 5 - 50 40 x 100 x 40 7 - 40
80 x 63 x 80 7 - 80 50 x 150 x 45 8 - 50
100 x 63 x 100 8 - 100 70 x 200 x 55 10 - 70
140 x 70 x 140 9 - 140 85 x 250 x 65 11 - 85
63 x 80 x 63 7 - 63 100 x 300 x 75 12 - 100
80 x 100 x 80 7 - 80
200 x 150 x 200 10 - 200
200 x 200 x 200 10 - 200
Other sizes on request

Cast Iron Universal V-Block Cast Iron Elongated V-Block

CAST IRON UNIVERSAL V-BLOCKS (IS-4960-1968) CAST IRON ELONGATED V-BLOCKS (IS-4960-1968)
Size in mm Clamping Size in mm Clamping
(W x L x H) Range (mm) (W x L x H) Range (mm)

100 x 63 x 100 8 - 100 40 x 100 X 30 5 - 40

160 x 80 x 160 12 - 160 50 x 160 X 35 6 - 50
200 x 100 x 200 16 - 200 63 x 200 X 63 7 - 63
300 x 125 x 300 20 - 300 100 x 300 X 63 8 - 100
Other sizes on request

Pg - 10
MAGNETIC V-BLOCKS
Ÿ Made from Hardened Alloy Steel Material
Ÿ Offered with 3 Magnetic surfaces, i.e. top and bottom face with 90º V-Angle and end surface opposite to switch.

MAGNETIC V-BLOCKS (HARDENED)

Sizes in mm Clamping Pull capacity Flatness Squareness Parallelism
(W x L x H) Range (mm) (Kgs) (µm) (µm) (µm)

40 x 40 x 50 3 – 25 25 5 5 5
56 x 75 x 75 5 – 40 75 5 5 5
70 x 100 x 95 5 – 65 100 5 5 5
75 x 150 x 100 5 – 70 125 10 10 10
125 x 200 x 150 10 – 150 175 10 10 10

Other sizes on request

MICROFLAT ROLLER BEARING V-BLOCKS

Used for inspection of Runout & Straightness of heavy cylindrical jobs which can be rotated manually after mounting on
Roller Bearings. They are offered as matched pairs having parallelism within 10 µm & included angle of rollers 90º

MICROFLAT ENGINEERS SPIRIT LEVEL

For checking and leveling of horizontal surfaces, machine tools, machine bases and horizontal shafts.

SALIENT FEATURES:
Ÿ Base made of Cast Iron, precision hand-scrapped finish.
Ÿ Main vial have graduation on each side of the bubbles while cross vial shows lateral
position for horizontal setting
Horizontal Spirit Level
Ÿ Horizontal Level having prismatic base
Ÿ Square Frame Level, having two adjacent faces prismatic & two other faces flat
Ÿ Square Frame Spirit Level can be provided with Magnets upon request.
Offered in various sizes and sensitivities as under:
a) Horizontal Level (L): 100 mm, 150 mm, 200 mm, 300 mm
b) Square Frame Level (LxW mm): 100 x 100, 150 x 150, 200 x 200, 300 x 300
c) For longer sizes, spirit levels can be mounted on CI Straight Edges as shown below.
d) Special levels for large cylindrical jobs can also be offered on request

Horizontal & Square Frame Level Square Frame Spirit Level

Sensitivity Range in mm/m
(mm/m) L = 100 mm L > 100 mm
0.01 ± 0.02 ± 0.05
0.02 ± 0.04 ± 0.1
0.05 ± 0.1 ± 0.25
0.1 ± 0.2 ± 0.5
Horizontal Level Mounted on CI Straight Edge
Other sizes on request
Pg - 11
MICROFLAT CAST IRON STRAIGHT EDGES
Cast Iron Straight Edges used for setting up and leveling machinery and for spotting bearing surfaces during hand scrapping
operations. Properly supported, they may be used with various indicating devices to check surface flatness of large Machined
areas like Machine Tables & Beds, Machine Guideways, etc.

SALIENT FEATURES:
Ÿ Made from Grey Iron Casting of grade FG 220 of IS 210, Ÿ Squareness of working surfaces wrt side faces:
Ÿ Made generally as per IS-5268-1991. Grades-0 and 1: Within 8 µm/25 mm
Grade-2: Within 15 µm/25 mm
Ÿ Working surfaces hand scrapped to desired accuracy
Ÿ High spots uniformly distributed. Proportion of bearing area of the
Ÿ Parallelism of side faces:
working surface within 20% for Gr-0 & Gr-1 & within 10% for Gr-2
Gr-0 & Gr-1: Within 30 µm/300 mm & 60 µm over
Ÿ Flatness of side faces: Any 300 mm length flat within 25 µm for Gr 0, total length
Gr-1 and within 50 µm for Gr-2. Gr-2: Within 60 µm/300 mm & 120 µm over total
length.

A. Cast Iron Bow Shaped & I-Section Type Straight Edge

Bow Shaped / Camel Back Type

I-Section / Parallel Type

Sizes Camel Back / Bow Type Straight Edge I-Section / Parallel Type Straight Edge Flatness & Parallelism
Min. width of Min. overall Min. flange Min. width of Min. overall Min. flange
Length Gr-0 Gr-1 Gr-2
working face depth thickness working face depth thickness

(mm) (mm) (mm) (mm) (mm) (mm) (mm) (µm) (µm) (µm)
300 30 80 10 25 75 8 2 3 6
500 35 130 12 30 75 10 3 5 10
800 40 175 14 30 80 10 3 6 10
1000 45 180 16 35 100 12 5 10 20
1600 55 275 20 50 150 12 6 12 20
2000 65 300 24 50 150 14 10 20 40
3000 90 400 32 55 250 16 15 30 60
4000 100 500 38 60 300 18 20 40 80
5000 100 550 46 65 350 20 25 50 100
Other sizes on request

Pg - 12
B. Cast Iron Prismatic / Triangular Straight Edge
They are used for trueing, spotting and reconditioning of dovetail guide-ways of Machine Tools, Slide etc.
Maximum error in specified angle within ±5'

Length Angles & width of working faces (mm)

(mm) 30º 45º 50º 55º 60º
250 50 50 50 45 45
300 50 50 50 45 45
500 70 70 70 60 60
600 70 70 70 60 60
750 90 90 90 80 80
1000 110 110 110 100 100
1250 130 130 130 110 110
1500 160 160 160 130 130
2000 200 200 200 160 160
Other sizes on request

C. Cast Iron 90 Degree V-Type Straight Edge

These are mainly used for inspection of machine guide ways. One side is provided flat and the other side is provided with 90º ±5'

STANDARD SIZES
Straightness &
Length (mm)
Parallelism (µm)

300 3.0
600 5.0
750 6.0
1000 10.0
1500 12.0
2000 20.0

Other sizes on request

MICROFLAT GRANITE STRAIGHT EDGES

Ÿ Made from Indian Black Granite.
Ÿ Two working faces (L x T) offered duly precision lapped finish to desired accuracy.
Ÿ Provided with suitable holes for weight reduction & for lifting

STANDARD SIZES AVAILABLE

Sizes in mm Straightness &
(L x W x T) Parallelism (µm)

300 x 100 x 50 2
500 x 100 x 50 3
750 x 125 x 75 3
1000 x 150 x 75 5
1600 x 200 x 75 6
2000 x 200 x 75 8
2500 x 200 x 100 12
3000 x 250 x 100 15
Other sizes on request

Pg - 13
MICROFLAT ALUMINIUM STRAIGHT EDGES
Ÿ Made from solid Aluminum material duly hard anodized. Working surfaces offered precision lapped finish.
Ÿ Very light in weight for ease of handling.
Ÿ Aluminum Hollow type straight edge having coarser accuracy is also offered on request.

Size in mm (L x W x T) Straightness (µm)

500 x 80 x 15 7
750 x 80 x 15 9
1000 x 80 x 15 12
1500 x 80 x 15 17
2000 x 80 x 15 22
Other sizes on request

MICROFLAT HARDENED & GROUND STEEL STRAIGHT EDGES

Ÿ Steel Straight Edges made generally as per IS-2220-1990
Ÿ Made from Alloy Steel, Hardened & Ground. STANDARD SIZES AVAILABLE
Ÿ Available in I-section and Parallel Type.
Ÿ Wooden storing case offered on request Size in mm Straightness Accuracy (µm)
LxWxT Gr-00 Gr-0 Gr-1 Gr-2
300 x 35 x 8 4 7 12 21
500 x 50 x 8 4 7 12 21
750 x 50 x 8 6 9.5 17 27
1000 x 50 x 8 8 12 21 33
1500 x 70 x 10 - 17 29 46
2000 x 70 x 10 - 22 37 58
2500 x 75 x 15 - 27 46 71
3000 x 85 x 18 - 32 54 83
4000 x 100 x 20 - 42 71 108
Other sizes on request

MICROFLAT KNIFE EDGE STRAIGHT EDGE

Ÿ Made from Hardened Alloy Steel
Ÿ Hardened and ground to 58 to 60 HRC STANDARD SIZES AVAILABLE
Ÿ Working faces ground/lapped finish Length (mm) Width (mm) Thickness (mm)
Ÿ Accuracy as per IS-3512-1966
50 30 8
75 35 8
100 40 10
150 40 10
200 50 12
250 50 12
300 60 12
500 50 15
600 60 20
750 60 20
1000 60 20

Other sizes on request

Pg - 14
MICROFLAT CAST IRON HOLLOW BOX PARALLEL
Cast Iron Box Parallels are extensively used in machine shops for set up and machining operations, building up height of
work-piece on machine tables and for mounting work piece for scribing and inspection.

SALIENT FEATURES:
Ÿ Made generally as per IS-4241-1990
Ÿ Made from close grained Cast Iron Casting conforming to Grade FG-220
of IS-210. Casting duly stress relieved.
Ÿ Working faces offered with hand-scrapped finish or ground finish to
required tolerances as per IS.
Ÿ Parallelism within 0.01 mm/ 100 mm.
Ÿ Box Parallels can be offered as matched pairs on request at extra cost.
Ÿ Tapped holes/T-slots/slots can be provided on request at extra cost.
Ÿ Box Parallels with finer accuracies can be offered than stipulated in the IS
on special request at extra cost.

STANDARD SIZES AVAILABLE

Length (mm) Width (mm) Height (mm)
100 x 100 x 100 100 100
150 x 150 x 100 150 100
300 x 200 x 125 200 125
250 x 250 x 250 250 250
350 x 350 x 250 350 250
150 x 150 x 150 150 150
200 x 200 x 200 200 200
300 x 300 x 300 300 300

Other sizes on request

MICROFLAT STEEL PARALLELS

These are used in Machine Shops for set up and machining operations, building up height of work on Machine Tables
and for mounting work for scribing and inspection.

SALIENT FEATURES:
Ÿ Made generally as per IS-4241-1990
Ÿ All the four longitudinal sides offered flat parallel
Ÿ Working faces offered duly ground finish
Ÿ Steel Parallels offered as matched pairs

STANDARD SIZES AND TOLERANCES FOR GRADE - 1 & 2

Parallelism between Matching tolerance
Size in mm Working faces (µm) (µm)
(L x W x T)
Grade - 1 Grade - 2 Grade - 1 Grade - 2
100 x 10 x 5 4.0 8.0 6.0 12.0
125 x 20 x 10 4.0 8.0 6.0 12.0
150 x 30 x 15 4.0 8.0 6.0 12.0
200 x 40 x 20 4.0 8.0 6.0 12.0
250 x 50 x 25 6.0 12.0 10.0 20.0
300 x 60 x 30 6.0 12.0 10.0 20.0
350 x 80 x 40 - 14.0 - 20.0
400 x 100 x 50 - 16.0 - 25.0

Other sizes on request

Pg - 15
MICROFLAT GRANITE PARALLELS
These are used in Machine Shops for set up and Machining operations, building up height of work on Machine Tables and
for mounting work for scribing and inspection. Granite Parallels being rust proof are preferred where coolants are used.
SALIENT FEATURES:
STANDARD SIZES AND TOLERANCES
Ÿ Working faces offered duly precision hand-lapped finish
Size in mm Parallelism between Matching tolerance Ÿ All the four longitudinal sides offered flat parallel
(L x W x T) Working faces (µm) (µm) Ÿ Granite Parallels offered in matched pairs

100 x 30 x 15 2.0 3.0

100 x 40 x 20 2.0 3.0
100 x 50 x 25 2.0 3.0
150 x 50 x 25 3.0 5.0
150 x 80 x 40 3.0 5.0
150 x 70 x 50 3.0 5.0
200 x 100 x 50 3.0 5.0
300 x 100 x 50 3.0 5.0
400 x 100 x 50 5.0 8.0
500 x 100 x 50 5.0 8.0
Other sizes on request

MICROFLAT TEST MANDRELS

Ÿ Test Mandrels are mainly used for Machine Tool Acceptance Test
Ÿ Test Mandrels are made generally as per IS-2063-2002.
Ÿ Made from Heat Treated Alloy Steel, case hardened to 58-60 HRC
Ÿ Test Mandrels Metric, SK, BT & other series are also offered.
Ÿ Provided with wooden storing case on request at extra cost.
Parallel Mandrel

STANDARD SIZES AVAILABLE

Length of Plain Parallel Mandrels

Taper Mandrel
Diameter in mm (Ø x L in mm)
Taper Mandrel
MT-2 to MT-6 300 / 500 Ø40 x 300/500/600
BT-30 to BT-50 300 / 500 Ø50 x 300/500/600
ISO-30 to ISO-50 300 / 500 Ø60 x 300/500/600
SK-30 to SK-50 300 / 500 Ø80 x 750/900/1000
Special Mandrels
Other sizes on request

MICROFLAT SQUARE MASTER

Square Master is a user friendly and economical equipment for measuring Squareness. It consists of a very accurate and calibrated
Cast Iron Column and a saddle sliding in vertical plane with a provision to hold dial gauges in front and lateral position.

Technical Data of Square Master

Description Model-300 Model-500
Travel (mm) 300 500
Squareness 3 µm 5 µm
Straightness 2 µm 3 µm
Lateral Squareness 3 µm 5 µm
Repeatability ± 1 µm ± 1 µm

Pg - 16
MICROFLAT MASTER CYLINDERS / CYLINDRICAL SQUARE
They provide most reliable reference standards for checking squareness of vertical axis with reference to horizontal axis.

SALIENT FEATURES:
Ÿ Made generally as per IS-6952-1990
Ÿ Made from Alloy Steel, heat-treated for stability & wear resistance.
Ÿ Periphery precision ground to a fine surface finish.
Ÿ Ends are recessed and have lapped finish.
Ÿ Magnetic V-Slide for mounting dial gauge offered at extra cost.

Standard & Popular Sizes

Length Diameter Squareness Flatness of end

(mm) Ø (mm) (µm) faces (µm)

300 95 / 85 5.0 2.5

450 120 / 85 7.0 4.0
500 120 / 85 8.0 4.0
600 140 / 85 9.0 5.0
750 150 / 100 11.0 6.0
1000 150 15.0 7.0

Other sizes on request

MICROFLAT CAST IRON SQUARE & RIGHT ANGLES

SALIENT FEATURES:
Ÿ Made from close grained Grey Iron Castings conforming to Grade FG-220 of IS-210. Casting duly stress relieved.
Ÿ Working surfaces and sides offered duly hand-scrapped finish
Ÿ Triangular Square having two working surfaces provided (H x B & L x B) perpendicular to each other.
Ÿ Universal Knee Right Angle having Squareness & Parallelism within 10 microns per 100mm.

Triangular Square Universal Right Angle

Standard Sizes of Triangular Square Standard Sizes for Universal Right Angle (L x W x H)

Sizes in mm Accuracy 100 x 100 x 125 100 x 100 x 150

(H x L x B) (microns) 100 x 125 x 150 100 x 125 x 200
300 x 200 x 50 3 125 x 200 x 300 150 x 175 x 250
400 x 250 x 50 4 150 x 200 x 250 150 x 150 x 200
500 x 300 x 50 5 200 x 250 x 300 200 x 250 x 400
600 x 400 x 50 6 250 x 300 x 400 300 x 300 x 600
800 x 500 x 50 8 Other sizes on request

1000 x 600 x 50 10
Other sizes on request
Pg - 17
MICROFLAT GRANITE SQUARES
Granite Squares provide one of the most reliable squareness inspection reference.Granite Squares are also used for checking
squareness of measuring axis in Co-ordinate Measuring Machines and geometrical alignment of Machine Tools.

SALIENT FEATURES:
Ÿ Made from Indian Black Granite.
Ÿ Offered in 2-Face Finish (H x T & L x T) and 3-Face Finish (H x T, L x T & H x L) .
Ÿ Suitable holes are provided for weight reduction and to facilitate lifting and handling.
Ÿ Finer accuracies can also be achieved on request at extra cost.
Ÿ Wooden storing case is provided on request at extra cost.
Ÿ For special applications, other surfaces can also be made flat and square to required tolerance on request at extra cost.

STANDARD SIZES AVAILABLE

Sizes (H x L x T) Squareness
(mm) (microns)

200 x 125 x 75 2.0

300 x 200 x 75 3.0
400 x 250 x 75 4.0
500 x 300 x 75 5.0
600 x 400 x 75 6.0
1000 x 600 x 100 8.0
1000 x 1000 x 100 10.0
Other sizes on request

MICROFLAT GRANITE 6-FACE MASTER SQUARE / CUBE

These are used mainly for gauging, inspection, squareness testing and for checking three axis geometric accuracies of
Machine Tools.

Master Square Master Cube Special Purpose Granite Cube

SALIENT FEATURES:
STANDARD SIZES AVAILABLE
- All individual faces Flat
Size (mm) Accuracy (µm)
- All adjacent faces mutually Square
- All opposite faces mutually Parallel (L x W x T) Flatness Squareness Parallelism
- Provided with suitable holes for lifting and handling. 300 x 300 x 50 2 3 3
- Finer accuracies can also be achieved on request 400 x 400 x 60 3 4 4
at extra cost.
500 x 500 x 80 4 5 5
630 x 630 x 80 4 5 5
750 x 750 x 100 4 7 7
1000 x 1000 x 150 5 8 8

Other sizes on request

Pg - 18
MICROFLAT CAST IRON MASTER SQUARE / CUBE
These are used mainly for gauging, inspection, squareness testing and for checking three axis geometric accuracies
of Machine Tools.

SALIENT FEATURES:
Ÿ Made from close grained Grey Iron Castings conforming to grade FG 220 of
IS-210.
Ÿ All the faces offered duly hand-scrapped finish
Ÿ Finer accuracies can also be achieved on request at extra cost
Ÿ Wooden storing case provided on request at extra cost

STANDARD SIZES AVAILABLE

Frame Type
Size (mm) Accuracy (microns)
(L x W x T) Flatness Squareness Parallelism
300 x 300 x 50 4 6 6
400 x 400 x 50 6 8 8
500 x 500 x 50 8 10 10
600 x 600 x 50 8 10 10
1000 x 1000 x 75 10 12 12
1200 x 1200 x 75 12 15 15
Cube Type
Other sizes on request

MICRO FLAT PRECISION ENGINEER'S SQUARES / TRY SQUARES

Ÿ Made generally as per IS-2103-1980.
Ÿ Working edges hardened to 56-58 HRC. Flat Edge Try Squares with Stock
Ÿ Larger sizes (above 1200) can be provided with a Size in mm Squareness (µm) Straightness (µm)
lifting arrangement. (L x W x T) Gr-A Gr-B Gr-C Gr-A Gr-B Gr-C
Ÿ Offered with a suitable storing case.
150 x 100 x 12 4 8 18 3 4 7
200 x 140 x 15 4 9 20 3 4 8
250 x 165 x 20 5 10 23 3 5 9
300 x 200 x 20 5 11 25 - 5 10
400 x 250 x 25 - 13 30 - 6 12
500 x 300 x 25 - 15 35 - 7 14
750 x 500 x 30 - 20 48 - 10 19
1000 x 750 x 40 - 25 60 - 12 24
1200 x 800 x 50 - 29 70 - 14 28
Flat Edge with Stock Bevelled Edge 1500 x 1000 x 50 - - 85 - 17 34
2000 x 1200 x 60 - - 110 - 22 44

Flat Edge Try Squares without Stock

Size in mm Squareness (µm) Straightness (µm)
(L x W x T) Gr-A Gr-B Gr-C Gr-A Gr-B Gr-C
150 x 100 x 6 4 8 18 3 4 7
200 x 140 x 7 4 9 20 3 4 8
250 x 165 x 8 5 11 25 3 5 10
Large Try Square with 300 x 200 x 8 5 11 25 - 5 10
Lifting Arrangement Flat Edge without Stock
400 x 250 x 10 - 15 30 6 12
Other sizes on request

Pg - 19
MICROFLAT COMPARATOR STANDS
SALIENT FEATURES:
Ÿ Base made from finely lapped Granite, housing made from Cast Iron and Pillar from Ground Steel.
Ÿ Main housing slides over the pillar and can be locked at any position.
Ÿ Fine adjustment in Bench Comparators is possible through auxiliary slides where a dial gauge is mounted.
Ÿ Bench Comparators have throat depth of 100 mm and accept jobs up to 200 mm, to suit 8 mm thimble for admitting dial gauge.
Ÿ Universal Comparators are provided without fine adjustment. Column spiral grooved pillar, mounted symmetrically allows the
dial gauge to be positioned over virtually all points on the Base.
Ÿ Cast Iron Universal Comparators having hardened and ground serrated platform provided with lapped ground finish with spiral
grooved column, pillar mounted symmetrically allows the dial gauge to be positioned over virtually all points on the base.

Granite Bench Comparator CI Universal Comparator

STANDARD SIZES AVAILABLE

Granite Bench Comparator Granite Universal Comparator Cast Iron Base Comparator

Base size Flatness Base size Flatness Base size Flatness

(mm) (microns) (mm) (microns) (mm) (microns)

200 x 150 x 50 2 300 x 300 x 50 3 200 x 150 5

250 x 250 x 50 2 400 x 400 x 50 3 250 x 250 5
300 x 200 x 50 3 500 x 500 x 80 4 300 x 200 5
300 x 300 x 50 3 630 x 630 x 80 5 300 x 300 5

Other sizes on request

MICROFLAT SINE BARS

SALIENT FEATURES:
PERMISSIBLE DIFFERENCE IN
Ÿ Made generally as per IS-5359-1987.
READINGS AT TEST POINTS 1 AND 2
Ÿ Made from Alloy Steel Hardened & Ground to 55-60 HRC.
Ÿ Roller Center distance 100 mm, 200 mm, 300 mm, 400 mm & Nominal size Max Deviation for setting Angle (µm)
500 mm. Lı (mm) 15º 30º 45º
100 0.8 1.0 1.3
200 0.7 0.9 1.2
300 0.6 0.8 1.2
400 0.6 0.8 1.1
500 0.5 0.7 1.1

Other sizes on request

Pg - 20
MICROFLAT SINE CENTERS
They are used for holding conical objects between Centers for Inspection of parameters like
Taper Angle, Run-out.

SALIENT FEATURES:
Ÿ Made generally conforming to IS-5979-1981
Ÿ Centers attachments are made out of Grey Iron Castings, mounted on a
Granite T-Slotted Beam
Ÿ Rollers and Dead Centers made from Hardened Alloy Steel
Ÿ Centers are mounted on V-support of the Center Body.
Ÿ Sine Center mounted on Granite Base Plate of Grade-0 accuracy having
a serrated H & G platform for placing slip gauge.

Admit Between Height of

Center (mm) Center (mm)
200 75 / 150
300 75 / 150
400 75 / 150
500 75 / 150
Other sizes on request

MICROFLAT SINE TABLES

Sine Tables are extensively used with the aid of slip gauges for precise checking of
tapers and also as a Fixture for Precision Machining and Grinding operation in
Machine Shops, Tool Rooms and inspection Shops and Standard Rooms.

SALIENT FEATURES:
Ÿ Single Angle Sine Table made generally as per IS-5939-1970
Ÿ Compound Angle Sine Table made generally as per IS-5943-1970
Ÿ Base and swiveling face are made from Grey Iron Casting, Gr FG-220 of IS-210.
Ÿ Roller and Slip Gauge Platform made from Alloy Steel Hardened and Ground.
Ÿ Top surface can be provided with Tapped Holes or T-Slots or Magnetic Chuck Single Angle (SST)

STANDARD SIZES AVAILABLE

Model Table dimension Base dimension C.D. of Rollers
SST/CST 01 150 x 100 180 x 150 100
SST/CST 02 200 x 150 230 x 200 150
SST/CST 03 250 x 150 280 x 220 200
SST/CST 04 300 x 200 330 x 250 250
SST/CST 05 400 x 250 430 x 300 300
Compound Angle (CST)
Other sizes on request

Pg - 21
MICROFLAT CAST IRON CLAMPING PALLETS
(SUB-TABLES) FOR CNC MACHINES

C.I Pallet Sub Tables are used on machining centres as ready fixture plates for
tooling up. They allow easy, faster and repetitive set up on machine pallet and
reduces change over time thereby minimizing loss of operating time. They also
help in protecting the surface of machine pallet and can also be used as sub-plates
to provide space for work setting.

SALIENT FEATURES:

Ÿ Made from close grained Cast Iron Castings conforming to Grade FG-260 of IS-210 having hardness
within 180-220BHN.
Ÿ Provided with hand-scrapped finish for top, bottom and sides faces.
Ÿ Provided with T-slots of on top working faces in both the direction or with tapped at suitable pitch.
Ÿ Sides are hand-scrapped for fixing abutment Plates.
Ÿ Counter bored holes provided for clamping with Machine Table.
Ÿ Flatness & parallelism within 0.010 mm/300 mm.
Ÿ Clamping Pallets as per customer's specification and drawings can also be manufactured.

Overall size Details of tapped holes Details of T-slots

Model No.
(mm) Size (mm) Pitch (mm) Size (mm) Pitch (mm)
CP400/50H 400 x 400 x 50 16 80 - -
CP500/50H 500 x 500 x 50 16 100 - -
CP630/50H 630 x 630 x 50 16 125 - -
CP800/50H 800 x 800 x 50 16 160 - -
CP400/75T 400 x 400 x 75 - - 18 80
CP500/75T 500 x 500 x 75 - - 18 100
CP630/75T 630 x 630 x 75 - - 18/22 125
CP800/75T 800 x 800 x 75 - - 18/22 160

Other sizes on request

Pg - 22
MICROFLAT CAST IRON CLAMPING CUBES
(TOOLING BLOCKS/TOMB STONE)
Tooling Blocks simultaneously provide multiple faces to hold components accurately in vertical plane for machining on horizontal
machining centres. Upon indexing of table a new face with new components is obtained for machining resulting into significant
reduction of downtime by elimination of multiple set ups. They can also be used for vertical clamping of components on Horizontal
Boring Machines, Milling Machines, Horizontal Jig Mills etc.

SALIENT FEATURES:
Ÿ Made from close grained Cast Iron Castings conforming to Grade FG-260 of IS-210 having hardness within 180-220 BHN.
Ÿ Provided with hand-scrapped finish on all working faces
Ÿ Flatness, Squareness and Parallelism within 25 microns per 300 mm
Ÿ Pitch tolerance between holes/T-slots within 0.3 mm
Ÿ Vertical tenon slots in the Centre can also be provided on request at an extra cost.
Ÿ Sides of base are provided with hand-scrapped for fixing abutment Plates.
Ÿ Counter bored holes provided to Base for clamping with Machine Table.
Ÿ Clamping cubes as per customer's specification & drawings can also be Manufactured.

Square with Holes and T-Slots Rectangular Plain Type

Square with Holes Hexagonal Type

STANDARD SIZES IN DIFFERENT TYPES

Size of top Block Size of top Block
Base dimension Overall height 4-face 2-face 4-face frame 2-face frame
in mm (L x W) (mm) (mm) (mm) (mm) (mm)

400 x 400 450/500 275 x 275 400 x 150 250 x 250 400 x 75
500 x 500 550/600 350 x 350 500 x 200 350 x 350 500 x 75
630 x 630 600/700 450 x 450 630 x 250 450 x 450 630 x 100
800 x 800 700/800 500 x 500 800 x 300 500 x 500 800 x 100

Other sizes on request

Pg - 23
MICROFLAT SINGLE SIDED FLAT LAPPING MACHINES
MICROFLAT Lapping Machines are single Plate Machines available in various Models suitable for vast majority of Lapping
applications including high stock removal, ultra hard materials, precision work to light band tolerances.

Bench Top Type

Floor Mounting Type with

Floor Mounting Type Pneumatic Pressure Weights

ADVANTAGES:
Ÿ Operationally fast, with high degree of repetitive results with no extra skill.
Ÿ Stressing of jobs eliminated as no holding force is required
Ÿ Odd shapes and different materials all can be lapped to a fine finish of 0.6 µm CLA and flatness to one light band.
Ÿ Variety of materials such as Cast Iron Soft/Hardened Steel, Stainless Steel, Bronze, Aluminum, Carbon, Plastics, Ceramics,
Ÿ Tungsten, Silicon, Stellite, Ferrite etc. can be lapped.

TYPICAL APPLICATIONS :
Mechanical seals, Piston Rings, Compressor Components, Pumps & Valves Components, Hydraulic Components, Gauge
Blocks, Precision Spacers, Metal Cutting inserts, Bearing Races, Springs, Slitter knives, Fuel Injection Components, Ceramic,
Seal & Valve components, Quartz Crystals, Precision Optics, Optical Flats, Metrological/Measuring Instrument components.

SALIENT FEATURES:
Ÿ Rigid Steel Construction ensuring rigidity and low vibrations in lapping operation.
Ÿ Specially graded Cast Iron Lapping Plates for proper embedding of the abrasive particles to ensure efficient material removal.
Ÿ Specially graded Cast Iron Conditioning Rings
Ÿ VFD Driven Main Motor for smooth start and stop operation
Ÿ Digital Timer for programming cycle time
Ÿ Slurry Tank with Slurry Feed Pump and Stirrer Motor for homogeneous mixture of abrasive with lapping vehicle
Ÿ Slurry Feed system using cyclic on/off timer for optimum use of slurry

Pg - 24
 Description Model-400 Model-450 Model-600 Model-750 Model-850 Model-1000

Dia. of Lap Plate (mm) 400 457 610 750 850 1000
No. of Condi. Rings (mm) 3 3 3 3 3 3
I.D. of Condi. Rings (mm) 140 175 248 315 350 406
O.D. of Condi. Rings (mm) 176 210 286 356 400 457
Height of Condi. Rings (mm) 50 55 84 84 100 102
Lap Plate speed (RPM) 48/60 48/60 48/60 48/60 48/60 48/60
Main Drive (HP) 1 2 2 3 3 5
Pump Motor (HP) 1/8, 3 phase 1/8, 3 phase 1/8, 3 phase 1/8, 3 phase 1/8, 3 phase 1/8, 3 phase
Timer (Sec / Minutes) 0-999 0-999 0-999 0-999 0-999 0-999

Other sizes on request

ADVANTAGES:
Ÿ Cast Iron Hand Lapping Plates
Ÿ Lapping Abrasive of various grits and Lapping Vehicle suitable for material to be lapped
Ÿ Diamond Lapping Paste
Ÿ Straightness Checking Gauge for Lap Plates
Ÿ Machine with Polishing Cloth
Ÿ Hand Polishing Table

MICROFLAT LAPPING PLATES

Cast Iron Lapping Plates are extensively used for accurate hand-lapping of ferrous and non-ferrous parts to improve flatness of
the components under lapping.

SALIENT FEATURES: STANDARD SIZES AND TOLERANCE OF FLATNESS

Ÿ Made from Grey Iron Casting of Grade FG 220 of IS-210 Square / Rectangular type Round type
Ÿ Offered in Square / Rectangular Type & Round Type
Ÿ Top surface provided with suitable grooves. Size in mm Flatness Size in mm Flatness
Ÿ Top surface offered duly hand-scrapped/lapped finish (L x B) (microns) (Diameter) (microns)
Ÿ M.S. Handles provided for sizes up to 630 x 630 mm
100 x 100 4.0 100 4.0
Ÿ Granite Lapping plates are also available.
150 x 150 5.0 150 5.0
160 x 100 6.0 200 5.0
250 x 160 7.0 250 7.0
250 x 250 7.0 300 7.0
400 x 250 8.0 400 9.0
400 x 400 9.0 450 9.0
500 x 500 10.0 500 9.0
630 x 400 10.0 600 10.0
630 x 630 10.0 750 12.0
750 x 750 12.0 900 12.0
900 x 600 12.0 1000 14.0
1000 x 630 12.0 - -
1000 x 1000 14.0 - -

Other sizes on request

Pg - 25
MONOCHROMATIC CHECK LIGHT
- Monochromatic Check light is required for gauging flatness of finished parts with the help
of Optical Flats.
- Red band for high accuracy and blue band for normal accuracy requirements.
- It is essential that surfaces which are to be measured should be made reflective.
- Optical flat which is placed over the surface to be measured, will reflect the light emitted
from the source, interference lines appear on the surface in various patterns and their
deviation from the straight reference line depicts the extent of out of flatness of surface
being measured.

OPTICAL FLATS
Optical Flats are used to inspect flatness of small components by observing fringe patterns on the part to be inspected when held
under monochromatic light source. .

SALIENT FEATURES:
- Optical flats are made from BK-7 Grade A fine annealed material
- They are offered in two types i.e. Single sided and Double sided.
- Standard sizes available are 30 Ø, 50 Ø, 75 Ø, 100 Ø, 125 Ø and 150 Ø
- Accuracy offered are λ/4, λ/6, λ/10.
- Optical flats are offered in wooden storing cases.
- Other sizes and special sizes on request.

MICROFLAT FLATNESS CHECKING EQUIPMENT

An ideal, convenient and accurate device to check the flatness of small Machined parts, metal stampings, lapped parts, etc. where
the conventional method of checking flatness is not feasible. Very simple and precise tool for Standard Room and in process
quality checks. Equipment is offered with various sizes of Grade-00 accuracy serrated Granite Plates.

Size of Plate Flatness

(mm) (µm)

300 x 300 x 50 2.6

400 x 400 x 60 2.8
500 x 500 x 80 3.0
630 x 630 x 80 3.2
Other sizes on request

MICROFLAT STRAIGHTNESS CHECKING GAUGE

Used for inspection of Straightness of components. Consisting of Aluminum Hard Anodized Gauge with provision for
mounting Dial Indicators and a precision Granite Setting Master. Gauge to be set on master and then placed on component
under inspection to measure deviation in dial indicator.

- Offered in sizes from 400 mm up to 1000 mm.

- Offered with wooden storing case.

Pg - 26
CUSTOM BUILT PRODUCTS
Microflat also undertakes design, development and manufacture of special purpose job holding fixtures, inspection fixtures and
other custom built equipment as per customer drawings & specifications.

Special Granite Base Plates

Pg - 27
 Special Granite Assemby for Measuring Machines

Granite Plate with Holes & Slots

Pg - 28
 Custom Built Measuring Machines

Length Measuring Machines

Parallelism Inspection Taper Measurement

Bench Center with Motorized Centers Special Purpose Sine Center

for Lead Inspection of Shafts

Pg - 29
CLIENTELE
Plot 25-28, Zone D-3, Phase IV, GIDC, Vithal Udyognagar - 388 121, Anand, Gujarat, India.
Phone: +91-2692-235730/205/332, Fax: +91-2692-236577
E-mail: info@microflatdatums.com
|

www.microflatdatums.com

• Due to constant developments, specifications & designs are subject to change.