Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 69 views

    Alpha Series - Front End Cylinder With Single Eye: FE A129-3-03880-001-K1600 Item No. Tipping Weight 43 - 59 Ton 70544230

    Uploaded by

    Nurdin
    This document provides specifications for an Alpha series front end lifting cylinder. It includes: - Item number and tipping weight range of 43-59 tons - Specifications for maximum pump flow, working pressure, volumes, loads and extension measurements - Component list and part numbers for the cylinder pieces - Charts with tipping weight and angle information related to cylinder length and configuration - Notes on intended use, temperature range, paint coating, and available documentation

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Alpha Series - Front End Cylinder With Single Eye: FE A129-3-03880-001-K1600 Item No. Tipping Weight 43 - 59 Ton 70544230

    Uploaded by

    Nurdin
    69 views2 pages
    This document provides specifications for an Alpha series front end lifting cylinder. It includes: - Item number and tipping weight range of 43-59 tons - Specifications for maximum pump flow, working pressure, volumes, loads and extension measurements - Component list and part numbers for the cylinder pieces - Charts with tipping weight and angle information related to cylinder length and configuration - Notes on intended use, temperature range, paint coating, and available documentation

    Original Title

    70544230

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides specifications for an Alpha series front end lifting cylinder. It includes: - Item number and tipping weight range of 43-59 tons - Specifications for maximum pump flow, working pressure, volumes, loads and extension measurements - Component list and part numbers for the cylinder pieces - Charts with tipping weight and angle information related to cylinder length and configuration - Notes on intended use, temperature range, paint coating, and available documentation

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    69 views2 pages

    Alpha Series - Front End Cylinder With Single Eye: FE A129-3-03880-001-K1600 Item No. Tipping Weight 43 - 59 Ton 70544230

    Uploaded by

    Nurdin
    This document provides specifications for an Alpha series front end lifting cylinder. It includes: - Item number and tipping weight range of 43-59 tons - Specifications for maximum pump flow, working pressure, volumes, loads and extension measurements - Component list and part numbers for the cylinder pieces - Charts with tipping weight and angle information related to cylinder length and configuration - Notes on intended use, temperature range, paint coating, and available documentation

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    Alpha series - Front end cylinder with single eye

    FE A129-3-03880-001-K1600 Item no. 70544230


    Tipping weight 43 - 59 ton

    * incl. 20 [-5; +30] mm pull out 3D model is available on request

    Specifications Max. pump flow Tipping time


    Max. working pressure 250 bar With KO¹ 190 L/min With KO¹ 12 sec
    Weight 142 kg Without KO¹ 137 L/min Without KO¹ 16 sec
    Working volume 37 L With KO¹ below -20°C 133 L/min With KO¹ below -20°C 17 sec
    Total volume 41 L Without KO¹ below -20°C 96 L/min Without KO¹ below -20°C 23 sec
    Max. cyl. load (start tipping) 245 kN Allowable lowering time 12 sec

    Extension 1 2 3 4 5 6 7 Total
    Effective diameter [mm] 129 110 91
    Stroke* [mm] 1280 1300 1300 3880
    Technical notes
    This cylinder is a lifting device only. It should not be used as a structural member and should not be subjected to side loads. Tipping valve must
    have a pressure relief at the cylinder port set not higher than max. working pressure. Verify max. cyl. load. Working temperature range is between
    -40°C and +80°C. Max. duration of extension is 0.5 hours (excluded hard chromed stages). Cylinder is painted black (RAL9005) with a min.
    thickness conforming to the 480 hours neutral salt spray test as per ISO 9227. ¹ Hyva knock-off.

    Related documentation
    Bracket options: 015BRA10 & 015BRA13 Mounting instructions: CYL-0031 Oil specifications: OIL-0011
    Spec sheet explanation: CYL-0041
    Tipping weight
    BL body length BL [mm] 5100 4950 4800
    OH rear overhang OH [mm] 200 400 600 200 400 600 200 400 600
    Ycog vert. pos. centre At [°] 46 48 51 48 50 53 50 52 55
    of gravity
    Qo pivot length Ycog [mm]
    C bracket length 400 43 46 50 43 47 51 44 48 53
    At tipping angle 700 47 51 57 48 52 59 49 54
    stroke x 60 / Qo 1000 51 53
    Tipping weight [ton] at maximum pressure of 250 bar for a vertically mounted cylinder and C is 158 mm

    For detailed tipping calculations please refer to: https://tipper.hyva.com


    Subject to change without notice, no rights reserved Page 1/2 DO-E 70544230 / 2017-7-28 / RV AD
    Alpha series - Front end cylinder with single eye
    FE A129-3-03880-001-K1600 Item no. 70544230

    Pos. Part no. Description Qty.


    1
    C01 71839110 DUST COVER FE 129-3/137-3 1

    P01 74402511 PISTON FL2 S 091-1515-HC 1


    P02 71853091 K SLIDER FL 091 (2 X 1/2) A22 1
    P03 71851091 K OUTER STOPRING FL 091 A22 1
    P04 71822091 BOTTOM PLATE PISTON FL 091 1
    P05 01745012 K CIRCLIP 82 DIN 472 (87.5x2.5) 1
    P06 71870215 K O-RING PISTON BOTTOM 091 1
    P07 71847200 PISTON EYE SPH. FL 091 MK2 L=075 1
    P08 01226430 K O-RING 72.62 X 3.53 MM 1
    P09 71875450 K SPHERICAL BEARING D.50 MAINT. FREE 1
    P10 01770560 K CIRCLIP 75 DIN 472 (79.5x3.0) 1
    P11 71875012 PIN ROUND HEAD GROOVED 8x15 mm 2

    S21 74603510 STAGE FL2 110-1510 1


    S22 71802110 K PACKSET FL 110 1
    S23 71853110 K SLIDER FL 110 (2 X 1/2) A22 1
    S24 71851110 K OUTER STOPRING FL 110 A22 1
    S25 71852110 K LIFTRING FL 110 A22 1
    S11 74604510 STAGE FL2 129-1510 1
    S12 71802129 K PACKSET FL 129/HP 129 1
    S13 71853129 K SLIDER FL 129 (2 X 1/2) A22 1
    S14 71851129 K OUTER STOPRING FL 129 A22 1
    S15 71852129 K LIFTRING FL 129 A22 1
    B01 74505510 BASE FL2 149-1549-4/4BSAE-190 1
    B02 71802149 K PACKSET FL 149/HP 150 1
    B03 71825420 BOTTOM PLATE FL2 149 1
    B04 71870030 K SEAL BOTTOM PLATE FL 149 1
    B05 71820149 LOCKING PLATE FL 149 3
    B06 01732055 K BOLT HEX M8X20X1.25 SET 6 PCS 1
    B07 01732559 K WASHER SPRING M8 SET 6 PCS 1

    Seal kit complete Notes


    71908430 K Consists of all packsets with packset grease and O- The inner stopring is pre-mounted in the grooves on spare bases and
    rings stages.Therefore, when ordering new tubes, it is not required to order inner stoprings
    separately.

    For repair instructions see: CYL-0040. Serial no. is located on type plate and near type plate support.

    Subject to change without notice, no rights reserved Page 2/2 DO-E 70544230 / 2017-7-28 / RV AD

    You might also like