Aramco Project Drawings New

%filename%filename%filename%filename%filename%filename%filename% xxxname
SAUDIARAMCO.
LEGEND/SYMBOL/ABBR.: - CENTER LINE W/ - WITH NOTES:
- AFFECTED EXISTING ACOUSTIC CEILING TILES, C
L
METAL FRAMING & HANGERS TO BE REMOVED 1. ALL DIMENSIONS ARE IN MILLIMETERS UNLESS OTHERWISE
- HATCHED DENOTES NOT IN CONTRACT FCU - FAN COIL UNIT C/W - COMPLETE WITH
(NIC) (BY PROPONENT) SPECIFIED OR NOTED.
EXIST'G SUSPENDED ACOUSTIC TILES (S.A.T.) TO BE REMOVE EXIST'G SUSPENDED ACOUSTIC - AFFECTED EXISTING LIGHTING TYP. - TYPICAL GALV. - GALVANIZED
TILES (S.A.T.) TO BE REMOVE FIXTURES TO BE REMOVED TEMPORARILY - EXISTING REINFORCED CONCRETE ROOF BEAMS 2. CONTRACTOR TO VERIFY ON SITE THE ACTUAL CONDITION AND
+650
+650
200 +2900 200 +2900 CONC. - CONCRETE CONC. - CONCRETE
& SET ASIDE FOR RE-INSTALLATION DIMENSIONS OF THE STRUCTURE PRIOR TO BIDDING/AND OR
(TYP.) (TYP.) - EXISTING REINFORCED CONCRETE COLUMNS START OF ANY WORK.
- AFFECTED EXISTING LIGHTING EXT'G. - EXISTING GA. - GAUGE
FIXTURES TO BE REMOVED TEMPORARILY APCS - ARAMCO PAINT COATING SYSTEM RD. - ROOF DRAIN
200
MAX. - MAXIMUM 3. ANY NECESSARY ADJUSTMENTS ARISING FROM A DISCREPANCY
200
& SET ASIDE FOR RE-INSTALLATION
OF
- SUSPENDED
W.W.A.P. - EXIST'G WOOD WOOL ACOUSTIC PANEL S.A.T. BETWEEN EXISTING AND PROPOSED SHALL BE DONE WITH THE
PL. - PLATE
FCU-3 FCU-3 FCU-3 FCU-3 FCU-3 ACOUSTIC TILES APPROVAL OF THE SAUDI ARAMCO REPRESENTATIVE PRIOR TO
- AFFECTED EXISTING CEILING DIFFUSERS - EXISTING FAN COIL UNIT ABOVE
CONSENT
FCU-3 STD. - STANDARD THE IMPLEMENTATION OF THESE WORKS.
TO BE REMOVED (BY CONTRACTOR) EXISTING CEILING
4. STRUCTURAL STEEL SHAPES SHALL BE IN ACCORDANCE WITH
STORE ROOM
ASTM A50 HAVING A MINUMUM YIELD STRENGTH OF 50 KSI.
STEEL PLATES & ANGLE BARS HAVING A MINIMUM YIELD
EXIST'G WOOD WOOL ACOUSTIC PANEL (W.W.A.P.) TO REMAIN EXIST'G SUSPENDED ACOUSTIC TILES (S.A.T.) TO BE REMOVE STRENGTH OF 36 KSI.
+7950
+7950
FCU-1
TTEN
MULTI-PURPOSE 5. DESIGN, DETAILING & FABRICATION OF ALL WELDED CONNECTION
+650
ROOM +2900 200 +2900 200 +2900 200 +2900 200 +2900 200 +2900 200 +2900 200 +2900 1000 2900 200 +2900 200 +2900 200 +2900 200 +2900 200 +2900 SHALL CONFORM TO THE AWS D1-1, STRUCTURAL WELDING CODE.
WRI
6. CONTRACTOR SHALL ERECT ALL NECESSARY SAUDI ARAMCO
SAFETY PRECAUTION AND BARRICADE AS PER SAUDI ARAMCO
200
CONSTRUCTION SAFETY MANUAL.
THE
200
FCU-1
200
DEMOLITION & NEW WORKS:
THOUT
FCU-1 FCU-1 FCU-1 FCU-1 STORE
CLASS ROOM
S C I E N C E L A B ART ROOM
HOME MAKING 1. ALL EXISTING FAN COIL UNITS, CEILING DIFFUSERS &
CMU WALL
AC DUCTS, AFFECTED BY THE WORK TO
WI
BE REMOVED & RE-INSTALLED BY CONTRACTOR.
+7950
ABLUTION AREA
STAGE CLASS ROOM
2. ALL EXISTING ACOUSTIC CEILING TILES, METAL FRAMING &
NG
(NIC)
HANGERS AFFECTED BY THE WORK TO BE REMOVED & REPLACED
DRAWI
COMPUTER ROOM
BY THE CONTRACTOR.
3. ALL EXISTING EXPOSED RIGID STEEL ELECTRICAL CONDUITS,

OFFICE ELECTRICAL PANEL BOARDS, LIGHTING FIXTURES, PROJECTORS
FCU-1 FCU-1 FCU-1 FCU-1 FCU-1 FCU-1 FCU-1 FCU-1
S
& SMOKE DETECTORS AFFECTED BY THE WORK TO BE REMOVED
THI
& RE-INSTALLED BY THE CONTRACTOR.
200
4. ALL ITEMS MENTIONED ON NOTES 1 - 3 OF DEMOLITION AND NEW
FROM
WORKS MUST BE COMPLETED PRIOR TO INSTALLATION OF
REMOVE EXISTING STAGE NEW METAL DECKS.
C O R R I D O R CMU WALL
CURTAIN RAILS INCLUDING
(NIC) 5. ALL PAINTINGS IN ACCORDANCE WITH APCS-26T.
WOODEN FRAMINGS AND
NED
PLYWOOD ENCASEMENTS
6. THE ANCHOR EMBEDMENT DEPTH SHOWN ON THE DRAWING IS
OBTAI
NOMINAL AND IF DELAMINATION OF THE CONCRETE AT THE
ANCHOR LOCATION IS ENCOUNTERED DURING THE INSTALLATION,
THEN THE EMBEDMENT DEPTH MUST BE INCREASED BY A
MINIMUM OF 50MM.
STAGE CMU WALL
BE
CONSTRUCTION NOTES:
CLASS ROOM CLASS ROOM
PART,SHALL
I-HILTI ANCHORS
PRODUCT: HILTI HAS M12 C/W HIT-HY 200.

HOLE DIAMETER IN THE BASE & FIXTURE MATERIAL:14MM
INSTALLATION TORQUE:0.041 KNM
ACCESSORIES:
HILTI SAFE SET PACKAGE
N
I
FULL,OR
INSTALLATION PROCEDURE:
INSTALLATION CONDITION: DRY

DRILL BORE HOLES TO THE REQUIRED EMBEDMENT DEPTH
USING "AUTOMATIC SAFE SET CLEANING INSTALLATION AS
PER ESR-3187".
N
FOR DETAILED INFORMATION ON INSTALLATION SEE INSTRUCTION
I
FOR USE GIVEN WITH THE PACKAGE OF THE PRODUCT.
ON
REPRODUCTI
II-STEEL DECKS
PRODUCT: CANAM P-3615 OR P-3606 OR EQUALLY APPROVED,

COMPLETE WITH STANDARD SCREWS, WASHERS & CAP.
REFERENCE DRAWINGS
CLASS ROOM (EXT'G. COVERED COURT) CLASS ROOM
DWG. CONTROL FOR J.O.19U065 CB-0004
SAUDIARAMCO.NO
PROP. REFLECTED CEILING PLAN HA-001007 SHT.002
ENLARGED PARTIAL PLAN/SEC/DET HA-001007 SHT.003
FCU-1 ENLARGED PLAN/SECT/DET HA-001007 SHT.005
STAGE/CORRIDOR/FRAMING/DET HA-001007 SHT.007
OF
PROPERTY
SOLE
DRAWING CERTIFIED
DATE: 8/ 27/ 2019
THE
CLASS ROOM CLASS ROOM CSTSD REF. NO. CB-0004
ARE N
HEREI
C O R R I D O R
NED
(NIC) SCALE:
CONTAI
200
200
REVISION VALIDATION
THIS REVISION NO. 00 IS COVERED, FOR ALL APPROVAL AND CERTIFICATION

FCU-2 FCU-2 FCU-2 FCU-2 FCU-2 FCU-2 FCU-2 FCU-2 FCU-2 REQUIREMENTS, PER SAEP-334, UNDER DRAWING COMPLETION CERTIFICATE NO:
ON
19U094-094
NFORMATI
DESIGN CERTIFICATION REVIEW FOR KEY DRAWINGS OTHER
+6050
+6050
CLINIC CANTEEN TOILET ENTRANCE (DESIGN AGENCY) x REQUIRED (SAUDI ARAMCO)
ENGG./DATE CERTIFIED BY/DATE CONST. AGENCY/DATE OPERATIONS/DATE BY/DATE

(NIC) OFFICE (NIC) ZMA AAB EDB FSM
08/27/19 08/27/19 08/27/19 08/27/19
OFFICE OFFICE SECRETORY TEACHERS ROOM
REV.NO. DATE REVISION DESCRIPTION
I
00 08/27/19 ISSUED FOR CONSTRUCTION
THE
JOB ORDER/EWO NO.
200
200
THIS REVISION IS NOT TO BE USED FOR
19U094 CONSTRUCTION UNTIL CERTIFIED AND DATED
SAUDI ARABIAN OIL COMPANY
AND
+650
+650
DRAWING TYPE
+2900 200 200 +2900 800 200 +2900
EXIST'G REFLECTED CEILING PLAN SDT
(TYP.) (TYP.) (TYP.)
NG
INS'L SAFETY DECK @ CONC. ROOF SLAB
DRAWI
EXIST'G WOOD WOOL ACOUSTIC EXIST'G SUSPENDED ACOUSTIC EXIST'G WOOD WOOL ACOUSTIC EXIST'G SUSPENDED ACOUSTIC
PANEL (W.W.A.P.) TO REMAIN TILES (S.A.T.) TO BE REMOVE PANEL (W.W.A.P.) TO REMAIN TILES (S.A.T.) TO BE REMOVE SCHOOLS GIRL'S INTERMEDIATE
AL-KHOBAR SAUDI ARABIA

1 EXISTING REFLECTED CEILING PLAN
S
PLANT NO. INDEX DRAWING NUMBER SHT. NO. REV. NO.
THI
HA-001007
SCALE 1 :100M KHGI-01
SH 001
dd%mm%yy
091 M HA-001007 001 00
xxxname %filename%filename%filename%filename%filename%filename%filename% Saudi Aramco 2615 ENG. (05/05)
REFERENCE DRAWINGS
DWG. CONTROL FOR J.O.
RESTRICTED VECTOR CADD-01

SAUDIARAMCO.
NEW SUSPENDED NOTES:
NEW SUSPENDED ACOUSTIC TILES (S.A.T.)
ACOUSTIC TILES (S.A.T.)
SIMILAR 1 1. ALL DIMENSIONS ARE IN MILLIMETERS UNLESS OTHERWISE
+650
200 +2900 200 +2900
1 HA-001007
SPECIFIED OR NOTED.
(TYP.) (TYP.)
SH 003
HA-001007
2. OTHER NOTES SEE DRAWING NO.HA-001007, SHEET 001.
+ 650
SH 004
200
1938
FCU-3 FCU-3 FCU-3 FCU-3 FCU-3
1
200
NEW L 100X100X10MM
OF
THK. CON. ANGLE HA-001007
BAR LEDGER SH 005
CONSENT
1938
NEW SUSPENDED ACOUSTIC TILES (S.A.T.)
+7950
STORE
NEW IPE-160
FCU-1
+ 7950
STEEL BEAM TYP.
MULTI-PURPOSE
1938
+650
+2900 200 +2900 200 +2900 200 +2900 200 +2900 200 +2900 200 +2900 200 +2900 1000 2900 200 +2900 200 +2900 200 +2900 200 +2900 200 +2900
ROOM
TTEN
LEGEND/SYMBOL/ABBR.:
200
1938
WRI
(NIC) - HATCHED DENOTES NOT IN CONTRACT
200
FCU-1 FCU-1 FCU-1 FCU-1 FCU-1 - NEW GALVANIZED METAL DECK, (UNDERNEATH
THE
CLASS ROOM
STORE
200
S C I E N C E L A B ART ROOM TO BE PAINTED WITH APCS-26T).
HOME MAKING
ABLUTION AREA - RE-INSTALLED LIGHTING FIXTURES
THOUT
(NIC)
+7950
NEW L 100X100X10MM
STAGE THK. CON. ANGLE CLASS ROOM - RE-INSTALLED LIGHTING FIXTURES
WI
BAR LEDGER
COMPUTER ROOM FCU - RE-INSTALLED FAN COIL UNITS
NG
(BY CONTRACTOR)
DRAWI
OFFICE
200
S
THI
1 1
HA-001007
HA-001007 C O R R I D O R CMU WALL
SH 003
FROM
SH 007
(NIC)
NED
100X100X10
OBTAI
ANGLE BAR (TYP.)
STAGE
BE
PART,SHALL
REFERENCE DRAWINGS
N
EXIST'G REFLECTED CEILING PLAN HA-001007 SHT.001
I
FULL,OR
CLASS ROOM CLASS ROOM ENLARGED PARTIAL PLAN/SEC/DET HA-001007 SHT.004
N
I ON
REPRODUCTI
SAUDIARAMCO.NO
OF
PROPERTY
SOLE
DRAWING CERTIFIED
CLASS ROOM CLASS ROOM DATE: 8 / 27 / 2019
THE
CSTSD REF. NO. CB-0004
1
ARE
HA-001007
SH 006
N
HEREI
C O R R I D O R
(NIC)
200
NED
200
SCALE:
CONTAI
FCU-2 FCU-2 FCU-2 FCU-2 FCU-2 FCU-2 FCU-2 FCU-2 FCU-2
REVISION VALIDATION

+6050
REQUIREMENTS, PER SAEP-334, UNDER DRAWING COMPLETION CERTIFICATE NO:
+6050
TOILET
ON
CLINIC CANTEEN ENTRANCE 19U094-094
NFORMATI
(NIC) OFFICE OFFICE OFFICE SECRETORY TEACHERS ROOM
(NIC) DESIGN CERTIFICATION REVIEW FOR KEY DRAWINGS OTHER
(DESIGN AGENCY) x REQUIRED (SAUDI ARAMCO)
ZMA AAB EDB FSM

08/27/19 08/27/19 08/27/19 08/27/19
200
200
I
THE
JOB ORDER/EWO NO.
+650
19U094
+650
CONSTRUCTION UNTIL CERTIFIED AND DATED

+2900(TYP.) 200 200 +2900 800 200 +2900
2 2
SIMILAR
AND
(TYP.) (TYP.)
HA-001007 HA-001007
DRAWING TYPE
2 SH 004 SH 004 NEW SUSPENDED ACOUSTIC TILES (S.A.T.)

PROP. REFLECTED CEILING PLAN SDT
NEW SUSPENDED
NG
HA-001007
ACOUSTIC TILES (S.A.T.) INS'L SAFETY DECK @ CONC ROOF SLAB
DRAWI
SH 004
SCHOOLS GIRL'S INTERMEDIATE
1 PROPOSED REFLECTED CEILING PLAN AL-KHOBAR SAUDI ARABIA
S
HA-001007
THI
SCALE 1 :100M
SH 001 KHGI-01
dd%mm%yy
091 M HA-001007 002 00
REFERENCE DRAWINGS

SAUDIARAMCO.
NOTES:
1. ALL DIMENSIONS ARE IN MILLIMETERS UNLESS OTHERWISE
SPECIFIED OR NOTED.
2. OTHER NOTES SEE DRAWING NO. HA-001007, SHEET 001.
200 +2900 200
OF
NEW L100X100X10MM THK. NEW GA.20X38MM
NEW GA.20X38MM
CONT. ANGLE BAR LEDGER EXT'G. CONC. ROOF SLAB P-3606 OR P-3615 OR
NEW GA.18X38MM P-3606 OR P-3615 OR
CONSENT
W/ EXT'G. ROOF EQUALLY APPROVED
P-3606 OR P-3615 OR EQUALLY APPROVED
WATERPROOFING MEMBRANE BY PROPONENT
+650
EQUALLY APPROVED EXT'G. CONC. ROOF SLAB BY PROPONENT
STEEL DECK TYP.
BY PROPONENT W/ EXT'G. ROOF STEEL DECK TYP.
STEEL DECK TYP. WATERPROOFING MEMBRANE
GAP
GAP
MAX.
MAX.
200
110
TTEN
20
20
350
WRI
38
38
138
THE
NEW IPE-160
160
160
STEEL BEAM NEW NEW
NEW
THOUT
IPE-160 BEAM IPE-160 BEAM
IPE-160 BEAM
+1900
WI NG
100
3 5
DRAWI
+650
NEW HILTI HAS,GALV. NEW PL.
+650
HA-001007 THREADED STEEL ROD M12, HA-001007
SH 003 C/W HIT-HY 200 W/ EMBEDED SH 003
LENGTH 100MM TYP. NEW PL. 5
NEW HILTI HAS,GALV. THREADED HA-001007
S
THI
STEEL THROUGH ANCHOR RODS SH 003
M12, C/W HIT-HY 200 TYP.

2
FROM
HA-001007
SH 003
EXT'G. CONC. BEAM

+1900
NED
EXT'G. CONC. BEAM
OBTAI
NEW IPE-160
BE
+7950
STEEL BEAM
PART,SHALL
2 TYP. SECTION DETAIL 3 TYP. SECTION DETAIL
NEW GA.20X38MM
HA-001007 HA-001007
P-3606 OR P-3615 OR SCALE 1 : 5M SCALE 1 : 5M
SH 003 SH 003
EQUALLY APPROVED
REFERENCE DRAWINGS
+1900
BY PROPONENT
N
I
STEEL DECK TYP. DWG. CONTROL FOR J.O.19U065 CB-0004
FULL,OR
N
I
EXT'G. CONC. ROOF SLAB
ON
W/ EXT'G. ROOF
REPRODUCTI
WATERPROOFING MEMBRANE 170
85 85
110
NEW RE-INSTALLED
FCU-1 LIGHTING FIXTURES, TYP.

10 30 30
+1900
20
20
NEW IPE-160 BEAM
38
FOR DETAIL REFER
115
10
SAUDIARAMCO.NO
HVAC LAYOUT
90
DRILL 2-{14MM HOLES
180
43
NEW #5/16-24 KWIK-FLEX FOR M12 ANCHOR RODS
NEW HILTI HAS,GALV.
SELF DRILLING SCREWS
90
THREADED STEEL ROD M12,
FIXED @ EACH CORRUGATION P
L10X170X180
200
C/W HIT-HY 200 W/ EMBEDED
10
LENGTH 100MM TYP.
NEW L100X100X10MM THK.
CONT. ANGLE BAR LEDGER
EXT'G. CONC. BEAM
TYP.
6 NEW L100X100X10MM THK. 6
OF
HA-001007
SH 003
PROPERTY
100
1 ENLARGED PARTIAL REFLECTED CEILING PLAN (TYP.) 4 TYPICAL DETAIL 5 STEEL END PL. DETAIL (TYP.)
SOLE
HA-001007
SCALE 1 : 25M HA-001007
SCALE 1 : 5M
HA-001007
SCALE 1 : 5M DRAWING CERTIFIED
SH 003
SH 002 SH 003
DATE: 8 / 27 / 2019
THE
ARE N
NEW GA.18X38MM
HEREI
P-3606 OR P-3615 OR
4 EQUALLY APPROVED
5 EXT'G. CONC. ROOF SLAB W/ EXT'G. ROOF
HA-001007 BY PROPONENT
SH 003 HA-001007 WATERPROOFING MEMBRANE STEEL DECK TYP.
SH 003 NEW APPROVED SEALANT,
NED
C TYP. SCALE:
L OF IPE-160 STEEL BEAM
CONTAI
20
REVISION VALIDATION
38
100
ON
NEW GA.20X38MM 19U094-094
NFORMATI
P-3606 OR P-3615 OR
NEW GA. 22 PRE-PAINTED DESIGN CERTIFICATION REVIEW FOR KEY DRAWINGS OTHER
EQUALLY APPROVED
METAL SHT. CLOSURE, TYP. (DESIGN AGENCY) x REQUIRED (SAUDI ARAMCO)
BY PROPONENT TO 3-SIDES ENGG./DATE CERTIFIED BY/DATE CONST. AGENCY/DATE OPERATIONS/DATE BY/DATE
STEEL DECK TYP. ZMA AAB EDB FSM
08/27/19 08/27/19 08/27/19 08/27/19
APPROVED SELF DRILLING
P 150
L10X170X180 EXT'G. WINDOW 100 50 SCREWS @ 300MM O.C., REV.NO. DATE REVISION DESCRIPTION
I
NEW IPE-160
TYP. 00 08/27/19 ISSUED FOR CONSTRUCTION
STEEL BEAM
THE
JOB ORDER/EWO NO.
EXT'G. CONC. BEAM +650 NEW L100X100X10MM THK. THIS REVISION IS NOT TO BE USED FOR

FIXED W/ 2-M12 HILTI

AND
ANCHOR RODS
DRAWING TYPE
ENLARGED PARTIAL PLAN/SEC/DET SDT
NG
INS'L SAFETY DECK @ CONC ROOF SLAB
DRAWI
6 TYP. SECTION DETAIL
HA-001007
SCALE 1 : 15M
SH 003
S
THI
KHGI-01
dd%mm%yy
091 M HA-001007 003 00
%filename%filename%filename%filename%filename%filename%filename%
dd%mm%yy

SAUDIARAMCO.
NOTES:
SPECIFIED OR NOTED.
NEW L100X100X10mm THK.

OF
CONSENT
NEW GA.18X38mm NEW L100X100X10MM THK.
+650
P-3606 OR P-3615 OR CONT. ANGLE BAR LEDGER
EQUALLY APPROVED
STEEL DECK TYP.
200
TTEN
WRI
NEW L100X100X10mm THK. 4
HA-001007
THE
SH 003
FCU-2 NEW GA.20X38MM
+1900
P-3606 OR P-3615 OR 200
1987
EQUALLY APPROVED
THOUT
CAULKING/SEALANT
BY PROPONENT
STEEL DECK TYP.
EXISTING CANTILEVER
WI
ROOF SLAB
NEW #12 SDS WITH
PLASTIC FISHER @ 300
NG
DRAWI
50
110
20
S
20
NEW GA. 20 PRE-PAINTED
THI
ALUMIMUM FLASHING
+1900
FROM
2 3
NEW #12 SDS @ 300
+6050
NEW GA.20X38mm HA-001007 HA-001007
1988
P-3606 OR P-3615 OR SH 003 SH 003
NED
EQUALLY APPROVED NEW STEEL DECK 150
STEEL DECK TYP.
OBTAI
RE-INSTALLED LIGHTING
FIXTURES, TYP.
+7950
BE
PART,SHALL
2 3 TYP. EDDGE FLASHING DETAIL
HA-001007
+1900
HA-008337
SH 003 SCALE 1 :5M
SH 004
1987
N
RE-INSTALLED LIGHTING
I
FIXTURES, TYP.
NEW IPE-160
FULL,OR
STEEL BEAM TYP.
350
200
N
I
REFERENCE DRAWINGS
ON
REPRODUCTI
+650
NEW IPE-160 3 EXIST'G REFLECTED CEILING PLAN HA-001007 SHT.001
STEEL BEAM HA-001007 NEW GA.18X38MM
SH 003 P-3606 OR P-3615 OR
EQUALLY APPROVED ENLARGED PARTIAL PLAN/SEC/DET HA-001007 SHT.003
BY PROPONENT
1987
NEW L100X100X10MM THK. FCU-1 ENLARGED PLAN/SECT/DET HA-001007 SHT.005

STEEL DECK TYP.
CONT. ANGLE BAR LEDGER FCU-2 ENLARGED PLAN/SECT/DET HA-001007 SHT.006
200 +2900 200 STAGE/CORRIDOR/FRAMING/DET HA-001007 SHT.007
4
SAUDIARAMCO.NO
HA-001007
NEW L100X100X10mm THK. SH 003
CONT. ANGLE BAR LEDGER 4
HA-001007
SH 004
200
200 + 2900 200
OF
PROPERTY
SOLE
DRAWING CERTIFIED
1 ENLARGED PARTIAL REFLECTED CEILING PLAN (TYP.) 2 ENLARGED PARTIAL REFLECTED CEILING PLAN (TYP.) DATE: 8/ 27 / 2019
THE
HA-001007 HA-001007
SCALE 1 : 25M SCALE 1 : 25M
SH 002 SH 002
ARE N
HEREI
NEW GA.18X38MM
NED
P-3606 OR P-3615 OR SCALE:
4 EQUALLY APPROVED
CONTAI
5 EXT'G. CONC. ROOF SLAB W/ EXT'G. ROOF
HA-001007 BY PROPONENT
SH 003 HA-001007 WATERPROOFING MEMBRANE STEEL DECK TYP. REVISION VALIDATION
TYP. THIS REVISION NO. 00 IS COVERED, FOR ALL APPROVAL AND CERTIFICATION
C
L OF IPE-160 STEEL BEAM REQUIREMENTS, PER SAEP-334, UNDER DRAWING COMPLETION CERTIFICATE NO:
ON
19U094-094
NFORMATI
20
38
100
ZMA AAB EDB FSM

NEW GA.20X38MM 08/27/19 08/27/19 08/27/19 08/27/19
P-3606 OR P-3615 OR REV.NO. DATE REVISION DESCRIPTION

EQUALLY APPROVED
I
METAL SHT. CLOSURE, TYP. 00 08/27/19 ISSUED FOR CONSTRUCTION
BY PROPONENT TO 3-SIDES
THE
STEEL DECK TYP. JOB ORDER/EWO NO.
APPROVED SELF DRILLING 19U094 CONSTRUCTION UNTIL CERTIFIED AND DATED
P 150
L 10X170X180 100 50 SCREWS @ 300MM O.C.,
EXT'G. WINDOW
AND
NEW IPE-160
TYP.
STEEL BEAM DRAWING TYPE
EXT'G. CONC. BEAM +650 NEW L100X100X10MM THK. ENLARGED PARTIAL PLAN/SEC/DET SDT
NG
DRAWI
ANCHOR RODS
HA-001007
SCALE 1 : 15M
SH 004
S
THI
KHGI-01
dd%mm%yy
091 M HA-001007 004 00

SAUDIARAMCO.
NOTES:
SPECIFIED OR NOTED.
3. FOR FCU LOCATION AND DUCT LAYOUTREFER TO HVAC DRAWINGS.
OF
CONSENT
EXT'G. CONC. ROOF SLAB W/ EXT'G. ROOF
3
TTEN
WATERPROOFING MEMBRANE NEW HILTI HAS,GALV.
HA-001007 THREADED STEEL ROD M12,
SH 005 C/W HIT-HY 200 W/ EMBEDED
TYP.
WRI
LENGTH 100MM TYP.
(SITE VERIFY)
THE
HA-001007
SH 005
CONT. ANGLE BAR
50
THOUT
38 25
WI
EXT'G. CONC. BEAM
600
NG
NEW IPE-160 RE-USED EXT'G.
DRAWI
STEEL BEAM HANGER RODS
100
(RE-INSTALLED FCU1)
S
THI
EXT'G. CONC. BEAM
FROM
600
NED
OBTAI
NEW L30X30X5MM THK. (SITE VERIFY) SITE VERIFY)
ANGLE BAR FCU SUPPORT,
WELDED TO NEW L-65X50X6 SITE VERIFY
BE
EXT'G. HIGH WINDOW
PART,SHALL
NEW GA.20X38MM 2 TYP. FCU FIXING DETAIL
P-3606 OR P-3615 OR HA-001007
SCALE 1 :10M
EQUALLY APPROVED SH 005
STEEL DECK TYP.
N
I
FULL,OR
N
I
TO BE RE-INSTALLED REFERENCE DRAWINGS
ON
(BY PROPONENT) EXT'G. WOOL NEW L100X100X10MM THK. DWG. CONTROL FOR J.O.19U065 CB-0004
REPRODUCTI
BOARD TO REMAIN CONT. ANGLE BAR
NEW GA.20X38MM
P-3606 OR P-3615 OR
EQUALLY APPROVED ENLARGED PARTIAL PLAN/SEC/DET HA-001007 SHT.003
STEEL DECK TYP. ENLARGED PARTIAL PLAN/SEC/DET HA-001007 SHT.004
SAUDIARAMCO.NO
NEW L65X50X6MM THK.
ANGLE BAR FCU SUPPORT, TYP.
WELDED TO ANGLE BAR
LEDGER & IPE-160 BEAM
38
NEW L65X50X6MM THK.
WELDED TO ANGLE BAR
NEW IPE-160 40
40
OF
STEEL BEAM
PROPERTY
RE-USED EXT'G.
HANGER RODS
(SITE VERIFY)
NEW L30X30X5MM THK.
SOLE
WELDED TO NEW L-65X50X6 DRAWING CERTIFIED
1 ENLARGED PLAN OF TYP. CEILING MOUNTED FCU DATE: 8 / 27 / 2019
THE
HA-001007
NTS
SH 002
(RE-INSTALLED FCU1)
ARE N
HEREINED
SCALE:
CONTAI
REVISION VALIDATION
(SITE VERIFY)

(SITE VERIFY)
ON
19U094-094
NFORMATI
ZMA AAB EDB FSM

08/27/19 08/27/19 08/27/19 08/27/19
3 SECTION DETAIL REV.NO. DATE REVISION DESCRIPTION
I
HA-001007
N.T.S.
SH 005
THE
JOB ORDER/EWO NO.
AND
DRAWING TYPE
FCU-1 ENLARGED PLAN/SEC/DET SDT
NG
DRAWI
S
THI
KHGI-01
dd%mm%yy
091 M HA-001007 005 00
dd%mm%yy
REFERENCE DRAWINGS

SAUDIARAMCO.
NOTES:
SPECIFIED OR NOTED.
3. FOR FCU LOCATION AND DUCT LAYOUTREFER TO HVAC DRAWINGS.
OF
WATERPROOFING MEMBRANE
CONSENT
3 NEW HILTI HAS,GALV.
BA-001253 THREADED STEEL ROD M12,
LENGTH 100MM TYP.
TTEN
38 20
WRI
50
THE
NEW IPE-160
STEEL BEAM
THOUT
RE-USED EXT'G.
600
HANGER RODS
5 5
100
WI
EXT'G. CONC. BEAM
(RE-INSTALLED FCU2)
NG
2
DRAWI
HA-001007
NEW L100X100X10MM THK. EXT'G. CONC. BEAM
SH 006
CONT. ANGLE BAR
S
THI
600
(SITE VERIFY) SITE VERIFY)
FROM
FY)
VERI
+1898
NED
OBTAI
SITE
EXT'G. HIGH WINDOW

(
BE
2 TYP. FCU FIXING DETAIL
PART,SHALL
HA-001007
FY)
SCALE 1 :10M
SH 006
VERI
TO BE RE-INSTALLED
(BY PROPONENT)
SITE
+1898
N
I
FULL,OR
REFERENCE DRAWINGS
EXT'G. WOOL NEW L100X100X10MM THK.
BOARD TO REMAIN CONT. ANGLE BAR EXIST'G REFLECTED CEILING PLAN HA-001007 SHT.001
NEW GA.20X38MM PROP. REFLECTED CEILING PLAN HA-001007 SHT.002
N
P-3606 OR P-3615 OR EXT'G. CONC. ROOF SLAB NEW GA.20X38MM
I
W/ EXT'G. ROOF P-3606 OR P-3615 OR ENLARGED PARTIAL PLAN/SEC/DET HA-001007 SHT.003
EQUALLY APPROVED
ON
STEEL DECK TYP. WATERPROOFING MEMBRANE EQUALLY APPROVED ENLARGED PARTIAL PLAN/SEC/DET HA-001007 SHT.004
STEEL DECK TYP.
REPRODUCTI
NEW L65X50X6MM THK.
WELDED TO ANGLE BAR
TYP.
SAUDIARAMCO.NO
3820
NEW L65X50X6MM THK.
WELDED TO ANGLE BAR
NEW IPE-160 LEDGER & IPE-160 BEAM
65
STEEL BEAM
VERIFY)
50
RE-USED EXT'G.
(SITE VERIFY)
OF
HANGER RODS
PROPERTY
SOLE
1 ENLARGED PLAN OF TYP. CEILING MOUNTED FCU (RE-INSTALLED FCU2)
HA-001007
NTS DRAWING CERTIFIED
SH 002
DATE: 8 / 27 / 2019
THE
ARE N
HEREINED
SCALE:
CONTAI
(SITE VERIFY)
REVISION VALIDATION
ON
19U094-094
NFORMATI
3 SECTION DETAIL DESIGN CERTIFICATION REVIEW FOR KEY DRAWINGS OTHER
HA-001007
N.T.S.
SH 006 ENGG./DATE CERTIFIED BY/DATE CONST. AGENCY/DATE OPERATIONS/DATE BY/DATE
ZMA AAB EDB FSM

08/27/19 08/27/19 08/27/19 08/27/19
I
THE
JOB ORDER/EWO NO.
AND
DRAWING TYPE
NG
INST'L SAFETY DECK @ CONC ROOF SLAB
DRAWI
S
THI
KHGI-01
dd%mm%yy
091 M HA-001007 006 00
dd%mm%yy
REFERENCE DRAWINGS

SAUDIARAMCO.
NOTES:
1. ALL DIMENSION ARE IN MILLIMETERS UNLESS
OTHERWISE NOTED AND SPECIFIED.
2. CONTRACTOR TO VERIFY ON SITE THE ACTUAL

DIMENSION AND CONDITION OF THE STRUCTURE
MULTI-PURPOSE HALL PRIOR TO START OF ANY WORK.
+3100 +9300 +3100 3. STEEL PIPE COLUMNS SHALL CONFORM WITH

ECC ECC ECC ECC ECC ECC
OF
ASTM-A53/A53M-18, GRADE A-36 (36 kSI)
STANDARD PIPE (SCH. 40/80).
EXISTING PERIMETER ROOF SLAB 6000
CONSENT
5 CONCRETE BEAM OUTLINE 4. STEEL PLATE SHALL CONFORM WITH ASTM A-36
(36 kSI).
HA-001007
PE160
PE160
PE160
PE160
PE160
PE160
SH 007 5. ALL EXISTING & NEW STRUCTURAL STEEL, METAL
+450
DECK, FRAMES, (EPC, NPC, EC, DIAGONAL SUPPORTS,
+3100
EXISTING RAILING ON STAGE) SHALL BE PAINTED IN
I
I
ACCORDANCE WITH APCS-26T OF SAES-H-101V BY THE
TTEN
NEW
NEW
NEW
NEW
NEW
NEW
CONTRACTOR.
NEW IPE200
6. STEEL DECK COMPLY WITH THE REQUIREMENTS
OF SDI (STEEL DECK INSTITUTE). IT SHALL BE
WRI
PRE-PAINTED AND CONFORM TO ASTM-A653/A653M.
7
+2950
STRUCTURAL QUALITY GRADE SS33 (230MPa).
2 HA-001007
EPC
EPC
THE
EC
EC
SH 007 7. ADHESIVE ANCHOR BOLTS SHALL BE HILTI OR
HA-001007
EPC EC NEW IPE200 EC EPC APPROVED EQUAL.
SH 007
THOUT
8. ALL WELDING WORKS SHALL BE DONE IN
9 4
ACCORDANCE WITH AWSD 1.1 USING E7018
HA-001007 HA-001007 FFL
NEW GA.20X76mm SERIES WELDING ELECTRODES.
SH 007 SH 007
P-3606 OR P-3615 OR
WI
9. ALL BOLTS SHALL CONFORM WITH ASTM A-325.
EQUALLY APPROVED
STEEL DECK TYP. 10. ALL STRUCTURAL STEEL BEAM SHALL CONFORM
NG
WITH EUROPEAN STANDARD OR WITH ASTM-A992,
+3100 +3100 +3100 +3100 +3100
DRAWI
3 3 REVERSE PORTION OF EXISTING RAILING
GRADE 50, (345 MPa)
HA-001007 HA-001007 TO BE CUT & RE WELDED TO 11. AREAS TO BE SITE WELDED SHALL NOT BE
SH 007 SH 007
MODIFIED POST TYP. PAINTED PRIOR TO WELDING.
S
THI
LEGEND/SYMBOL/ABBREVIATION:
2 S E C T I O N
1 PROPOSED FRAMING STAGE CORRIDOR PLAN EPC - EXISTING PIPE COLUMN
FROM
HA-001007
SCALE 1 :50M
HA-001007 SH 007
SCALE 1 :50M
SH 002 NPC - NEW PIPE COLUMN
EC - ENCASED COLUMN
NED
100
2-M20 GALVANIZED NEW METAL DECK ECC - EXISTING CONCRETE COLUMN
OBTAI
8 EXISTING PERIMETER
BOLT (TYPICAL)
+ 300
CONCRETE BEAM S.O.G. - SLAB ON GRADE
35
EXISTING CONCRETE BEAM FFL - FLOOR FINISH LEVEL
BE
10
75
200
6
+150
EXISTING PERIMETER NEW IPE160
2-M20 GALVANIZED
20
HA-001007
PART,SHALL
CONCRETE BEAM BOLT (TYPICAL)
35
SH 007
20
76
76
4070 40
STEEL PLATE
30
135
75
8 100X175X8mm THK.
IPE160
IPE200
NEW IPE200
1200
50 6
N
I
60 STEEL PLATE
110X135X8mm THK.
FULL,OR
2-M20 GALVANIZED 10
EXISTING 100mm DIA. STEEL
BOLT (TYPICAL)
100 PIPE COLUMN ENCASED W/
4 S E C T I O N NEW 5" SCHD 80 PIPE. REFERENCE DRAWINGS
HA-001007
SCALE 1 :5M TYP.
SH 007 6 STEEL PLATE DWG. CONTROL FOR J.O.19U065 CB-0004
100X150X8mm THK.
N
NEW IPE200 3 EXIST'G REFLECTED CEILING PLAN HA-001007 SHT.001
I
EXISTING 100mm DIA.
170
45
PIPE COLUMN PROP. REFLECTED CEILING PLAN HA-001007 SHT.002
ON
°
85 85 ENLARGED PARTIAL PLAN/SEC/DET HA-001007 SHT.003
REPRODUCTI
DRILL 2-{22mm HOLES ENLARGED PARTIAL PLAN/SEC/DET HA-001007 SHT.004
FOR M20 ANCHOR BOLTS FCU-1 ENLARGED PLAN/SECT/DET HA-001007 SHT.005
9 S E C T I O N 10 D E T A I L
950
35

70
HA-001007 HA-001007
6 SCALE 1 :10M SCALE 1 :10M
SH 007 SH 007
3
45
°
EXISTING 100mm DIA.
SAUDIARAMCO.NO
NEW IPE160 BEAM
300
NEW 5" SCHD. 80

STEEL PIPE COLUMN
BLACK IRON PIPE, DIAGONAL
BRACINGS PAINT W/ APCS-26T,
EXISTING 100mm DIA. NEW 125mm DIA.
(TYPICAL)
STEEL PIPE COLUMN STEEL PIPE SLEEVE
P
L 10x170x300
70
REINFORCEMENT (SPLIT INTO

6
35
NEW 125mm DIA. HALF THEN WELD ON EXISTING

STEEL PIPE SLEEVE COLUMN AND BASE PLATE)
6
REINFORCEMENT (SPLIT INTO
6
HALF THEN WELD ON EXISTING
6 NEW HAS-M16x150
TYP. COLUMN AND BASE PLATE)
HVU ADHESIVE ANCHOR
OF
HA-001007
6 FACE PLATE DETAIL
200
SH 007
BY HILTI OR APPROVED
NEW HAS-M16x150 EQUAL (TYP.)
PROPERTY
5 S E C T I O N HVU ADHESIVE ANCHOR
200
HA-001007 BY HILTI OR APPROVED
6 SCALE 1 :5M
FY
SH 007 EXISTING
EQUAL (TYP.)
VERI
EXISTING 100mm DIA. 40 40

FLOOR LEVEL
STEEL PIPE COLUMN NEW 5" SCHD. 80
10
BLACK IRON PIPE (SPLIT INTO
EXISTING
ELD
3 HALF THEN WELD ON EXISTING
SOLE
TYP. FLOOR LEVEL
DRAWING CERTIFIED
45
NEW 5" SCHD. 80 BLACK COLUMN AND BASE PLATE)

FI
10
°
IRON PIPE COLUMN (SPLIT INTO

HALF THEN WELD ON EXISTING EXISTING EXISTING DATE: 8 / 27 / 2019
+ 2000
THE
COLUMN AND BASE PLATE), BASE PLATE CONCRETE WALL
PAINT W/ APCS-26T, TYPICAL.
6 50
EXISTING EXISTING
ARE
ANCHOR BOLTS CONCRETE WALL
12 SECTION DETAIL
HA-008337
EXISTING 100mm DIA. SCALE 1 :5 M
N
SH 007
HEREI
STEEL PIPE COLUMN
11 SECTION DETAIL 155 0 1.0 2.0 3.0 4.0 5.0 10.0
6 COLUMNS STRENGTHENING (ENCASED) DETAIL HA-008337

SCALE 1 :5 M 50 45 77.5 77.5
SH 007
METERS
6 S E C T I O N
NED
2-16mm THK.
300 EXISTING 100mm DIA. SCALE: 1 : 100M
SPLICE PLATE NEW 10mm THK.
HA-001007
SCALE 1 :5 M
CONTAI
STEEL PLATE STEEL PIPE COLUMN
SH 007 40 40
(SPLIT INTO HALF
NEW 125mm DIA. REVISION VALIDATION
THEN WELD ON SITE)
50
PIPE SLEEVE
8 SPLIT INTO HALF REQUIREMENTS, PER SAEP-334, UNDER DRAWING COMPLETION CERTIFICATE NO:
45
6
5
ON
77.
54 32 32 33
IPE200 IPE200 19U094-094

NEW HAS-M16x150
NFORMATI
5
EXISTING BASE
155
77.
100 HVU ADHESIVE ANCHOR DESIGN CERTIFICATION REVIEW FOR KEY DRAWINGS OTHER
PLATE W/ ANCHOR BOLTS (DESIGN AGENCY) x REQUIRED (SAUDI ARAMCO)
5
8-M20 A325N (TYP.) 12
155
77.

ON STANDARD HOLES ZMA AAB EDB FSM
HA-008337
5
10
77.
08/27/19 08/27/19 08/27/19 08/27/19
6 SH 007
11 REV.NO. DATE REVISION DESCRIPTION
330
10
6
I
HA-008337
33 32 32 54
THE
SH 007
10mm THK. NEW 10mm THK. JOB ORDER/EWO NO.
100X73x10mm THK.
STIFFENER PL. STEEL PLATE
10
EXISTING 100mm DIA. TYP.
3 D E T A I L 6 (SPLIT INTO HALF
STIFFENER PL.
AND
STEEL PIPE COLUMN
HA-001007 8 DIAGONALLY THEN
100
SCALE 1 :10M
SH 007
HA-001007 PL. 16mm THK.
WELD ON SITE) PLAN DRAWING TYPE
STAGE/CORRIDOR/FRAMING/DET SDT
SH 007 TYP. PLAN
NG
BASE REINFORCEMENT DETAIL INS'L SAFETY DECK @ CONC. ROOF SLAB
DRAWI
37 76 37
73 14 @ CORRIDOR PIPE COLUMNS
150 BASE REINFORCEMENT DETAIL HA-008337
STIFFENER PL. SCALE 1 :5 M
13 @ CORRIDOR PIPE COLUMNS SH 007
7 D E T A I L 8 S E C T I O N HA-008337
S
SCALE 1 :5 M PLANT NO. INDEX DRAWING NUMBER SHT. NO. REV. NO.
THI
HA-001007
SCALE 1 :5M HA-001007
SCALE 1 :5 M
SH 007 KHGI-01
SH 007 SH 007
dd%mm%yy
091 M HA-001007 007 00

C:\Users\JOSEJV\structural\SABG.SCHOOL-DH-(for PDF)\KHGI-01 - CB-0004 - DCC\H001008001V00.dgn josejv
SAUDIARAMCO.
NOTES:
1. ALL DIMENSIONS ARE IN MILLIMETERS UNLESS
OTHERWISE SPECIFIED OR NOTED.
2. THE CONTRACTOR SHALL VERIFY THE EXISTING SITE
+650
+650
200 +2900 200 +2900 CONDITION AND FIELD DIMENSIONS PRIOR TO START
(TYP.) (TYP.) OF WORKS
3. SCHEDULE EXISTING AIR CONDITIONING UNIT FOR
200
200
PREVENTIVE MAINTENANCE PRIOR TO RE-USE.
OF
RETURN AIR GRILLE
PORTION OF FRESH AIR DUCT TO 4. REMOVE UNNECESSARY MATERIALS AND EXISTING
TO BE REMOVED
CONSENT
FCU-3 FCU-3 FCU-3 FCU-3 FCU-3 BE CUT AND REMOVED (TYPICAL) DUCTWORKS FROM WORK SITE AND DISPOSE ALL
(TYPICAL)
MATERIALS AS PER INSTRUCTION OF THE SAUDI
FCU TO REMAIN ARAMCO PROJECT ENGINEER.
(TYPICAL) SUPPLY AIR GRILLE
STORE ROOM
TO BE REMOVED 5. ALL DUCTWORK SHALL BE FABRICATED AND
(TYPICAL)
FCU-1
INSTALLED IN ACCORDANCE WITH SMACNA,
+7950
+7950
INTERNATIONAL MECHANICAL CODE (IMC) AND OTHER
TTEN
FCU TO BE REMOVED APPLICABLE SAUDI ARAMCO & NFPA STANDARDS.
MULTI-PURPOSE SET ASIDE FOR RE-USE
+650
ROOM +2900 200 +2900 200 +2900 200 +2900 200 +2900 200 +2900 200 +2900 200 +2900 1000 2900 200 +2900 200 +2900 200 +2900 200 +2900 200 +2900 TYPICAL) 6. EXTEND & RECONNECT NEW FRESH AIR DUCT TO
WRI
EXISTING FRESH AIR DUCT.
200
7. PROVIDE 50MM THICK FIBERGLASS INSULATION TO
THE
NEW DUCTWORKS.
200
8. INSTALL NEW CONDENSATE DRAIN COMPLETE WITH
200
THOUT
STORE P-TRAP.
CLASS ROOM
S C I E N C E L A B ART ROOM 9. BALANCE THE AIR DISTRIBUTION SYSTEM TO +10% OF
HOME MAKING -
CMU WALL THE REQUIRED AIR FLOW AS PER SAES-K-001,
SECTION 6.
WI
+7950
ABLUTION AREA
STAGE CLASS ROOM 10. CUT AND REMOVED PORTION OF CHILLED WATER
NG
(NIC) SUPPLY AND RETURN LINES AFFECTED BY THE
DRAWI
COMPUTER ROOM RELOCATION OF THE EXISTING FAN COIL UNITS.
11. EXTEND THE EXISTING CHILLED WATER SUPPLY AND
RETURN LINES COMPLETE WITH INSULATIONS TO THE
OFFICE NEW LOCATION OF FAN COIL UNITS. CONNECT/TIE-IN
S
TO EXISTING CHILLED WATER LINES.
THI
200
12. FOR OTHER INFORMATION REFER TO SCOPE OF
WORKS.
FROM
C O R R I D O R
(NIC)
NED
OBTAI
STAGE
BE
PART,SHALL
(NIC) (NIC)
REFERENCE DRAWINGS
N
I
FULL,OR
(NIC) (NIC)
N
I ON
REPRODUCTI
LEGEND
ITEMS TO BE REMOVED
(NIC) NOT IN CONTRACT

FCU FAN COIL UNIT
SAUDIARAMCO.NO
(NIC) (NIC)
OF
(NIC)
PROPERTY
(NIC)
SOLE
DRAWING CERTIFIED
DATE: 8 / 27 / 2019
THE
CLASS ROOM CLASS ROOM CSTSD REF. NO. CB-0004
(NIC)
ARE
(NIC)
N
HEREI
0 1.0 2.0 3.0 4.0 5.0 10.0
METERS
C O R R I D O R
NED
RETURN AIR GRILLE TO BE REMOVED 1 : 100M
(NIC) SCALE:
FCU TO BE REMOVED & SET ASIDE FOR RE-USE (TYPICAL)
CONTAI
SET ASIDE FOR RE-USE
200
200
(TYPICAL)
REVISION VALIDATION
FCU-1 FCU-1 FCU-1
SUPPLY AIR GRILLE THIS REVISION NO. 00 IS COVERED, FOR ALL APPROVAL AND CERTIFICATION
TO BE REMOVED SUPPLY & RETURN DUCT WORK TO REQUIREMENTS, PER SAEP-334, UNDER DRAWING COMPLETION CERTIFICATE NO:
(TYPICAL) BE REMOVED & SET ASIDE FOR RE-USE.
ON
19U094-094
FCU-2 FCU-2 FCU-2 FCU-2 FCU-2 FCU-2 FCU TO BE REMOVED & SET ASIDE FOR
NFORMATI
RE-USE (TYPICAL) DESIGN CERTIFICATION REVIEW FOR KEY DRAWINGS OTHER
+6050
+6050
CLINIC CANTEEN TOILET ENTRANCE (DESIGN AGENCY) x REQUIRED (SAUDI ARAMCO)

(NIC) OFFICE (NIC) ZMA AAB EDB FSM
08/27/19 08/27/19 08/27/19 08/27/19
OFFICE OFFICE SECRETORY
SUPPLY AIR GRILLE TO BE REMOVED
I
SET ASIDE FOR RE-USE (TYPICAL) 00 08/27/19 ISSUED FOR CONSTRUCTION
THE
JOB ORDER/EWO NO.
TEACHERS ROOM
200
200
19U094 (CSTSD REF# CB-0004) CONSTRUCTION UNTIL CERTIFIED AND DATED
AND
+650
+650
DRAWING TYPE
+2900 200 200 +2900 800 200 +2900
EXISTING HVAC LAYOUT HVA
(TYP.) (TYP.) (TYP.)
NG
DRAWI

1 EXISTING HVAC LAYOUT
S
THI
HA-001008
SCALE 1 :100M KHGI-01
SH 001
10-SEP-2019 10:18
091 K HA-001008 001 00
josejv C:\Users\JOSEJV\structural\SABG.SCHOOL-DH-(for PDF)\KHGI-01 - CB-0004 - DCC\H001008001V00.dgn Saudi Aramco 2615 ENG. (05/05)

SAUDIARAMCO.
NOTES:
FOR ENLARGE HVAC LAYOUT 7 1. ALL DIMENSIONS ARE IN MILLIMETERS UNLESS

HA-001008 OTHERWISE SPECIFIED OR NOTED.
REFER TO DRAWING NO
SH 003
OF
CONSENT
FOR ENLARGE HVAC LAYOUT REFER TO DRAWING NO 4 FOR ENLARGE HVAC LAYOUT 6
FCU-1
STORE
HA-001008 HA-001008
REFER TO DRAWING NO
SH 003 SH 003
MULTI-PURPOSE
ROOM
TTEN
WRI
THE
CLASS ROOM
STORE
S C I E N C E L A B ART ROOM HOME MAKING FCU-1 FCU-1 FCU-1 FCU-1 FCU-1
ABLUTION AREA
THOUT
(NIC)
STAGE CLASS ROOM
WI
COMPUTER ROOM
NG
DRAWI
OFFICE
S
THI
C O R R I D O R CMU WALL
FROM
(NIC)
NED
FOR ENLARGE HVAC LAYOUT 5
OBTAI
HA-001008
REFER TO DRAWING NO
STAGE SH 003
BE
PART,SHALL
REFERENCE DRAWINGS
N
I
FULL,OR
N
I ON
REPRODUCTI
LEGEND
(NIC) HATCHED DENOTES NOT IN CONTRACT
CLASS ROOM (EXT'G. COVERED COURT) CLASS ROOM FAN COIL UNIT
FCU (RE INSTALLED/RE-USED)
EXISTING DUCT WORKS
SAUDIARAMCO.NO
TO BE RE-INSTALL/RE-USED
NEW DUCTWORKS
OF
PROPERTY
SOLE
DRAWING CERTIFIED
CLASS ROOM CLASS ROOM DATE: 8 / 27 / 2019
THE
ARE N
HEREI
1 FOR ENLARGE HVAC LAYOUT
C O R R I D O R 0 1.0 2.0 3.0 4.0 5.0 10.0
HA-001008
REFER TO DRAWING NO (NIC)
SH 003 METERS
NED
SCALE: 1 : 100M
CONTAI
FCU-1 FCU-1 FCU-1
FCU-2 FCU-2 FCU-2 FCU-2 FCU-2 FCU-2 REVISION VALIDATION

TOILET
ON
CLINIC CANTEEN ENTRANCE 19U094-094
NFORMATI
(NIC) OFFICE OFFICE OFFICE SECRETORY
(NIC) DESIGN CERTIFICATION REVIEW FOR KEY DRAWINGS OTHER
ZMA AAB EDB FSM

08/27/19 08/27/19 08/27/19 08/27/19
TEACHERS ROOM REV.NO. DATE REVISION DESCRIPTION
I
THE
JOB ORDER/EWO NO.
AND
2 FOR ENLARGE HVAC LAYOUT 3 FOR ENLARGE HVAC LAYOUT
DRAWING TYPE
HA-001008
REFER TO DRAWING NO HA-001008
REFER TO DRAWING NO PROPOSED HVAC LAYOUT HVA
SH 003 SH 003
NG
DRAWI
1 PROPOSED HVAC LAYOUT AL-KHOBAR SAUDI ARABIA
HA-001008
SCALE 1 :100M
S
THI
SH 002
KHGI-01
10-SEP-2019 10:20
091 K HA-001008 002 00

SAUDIARAMCO.
NOTES:
OF
375x375 SCD 4-WAY
@ 366.7 CFM
CONSENT
(TYP. TO 3)
TTEN
600x600 VD VD
RAG
CLASS ROOM
WRI
HOME MAKING 400x250 SAD
THE
FLEXIBLE CANVASS FCU-2 FCU-2 FCU-2 FCU-2 FCU-2 FCU#2
VD VD
MACHINE CONNECTION FLEXIBLE CANVASS FLEXIBLE CANVASS
MACHINE CONNECTION MACHINE CONNECTION
THOUT
600x600 RAG 600x600 550x300 SAD
RAG
900x250 SAD 900x250 SAD
VD 400x250 SAD VD
WI
900x250 SAD
NG
DRAWI
VD VD VD VD VD VD 750x300 SAD
400x250 SAD 400x250 400x250
SAD SAD 700x250 SAD
S
700x250 SAD
THI
VD VD VD VD VD VD FLEXIBLE CANVASS
VD VD VD VD VD VD
375x375 SCD 4-WAY MACHINE CONNECTION
@ 366.7 CFM
FROM
FCU#1 FCU#1
(TYP. TO 3)
375x375 SCD 4-WAY 375x375 SCD 4-WAY
CLINIC CANTEEN OFFICE @ 366.7 CFM OFFICE OFFICE @ 366.7 CFM
SECRETORY
(TYP. TO 3) (TYP. TO 3)
NED
700x250 SAD
OBTAI
600x600 RAG
BE
PART,SHALL
1 ENLARGE HVAC LAYOUT 2 ENLARGE HVAC LAYOUT 3 ENLARGE HVAC LAYOUT 4 ENLARGE HVAC LAYOUT
HA-001008 HA-001008 HA-001008 HA-001008
SCALE 1 :50M SCALE 1 :50M SCALE 1 :50M SCALE 1 :50M
SH 003 SH 003 SH 003 SH 003
REFERENCE DRAWINGS
N
I
FULL,OR
N
I ON
REPRODUCTI
LEGEND
1 SAD SUPPLY AIR DUCT
600x600 RAG HA-001008

SH 004 SCD SUPPLY CEILING DIFFUSER
SAUDIARAMCO.NO
RAG RETURN AIR GRILLE
VD VOLUME DAMPER
600x600 RAG
300x300 SCD 4-WAY
OF
FCU#1 FCU#1 FCU#1 FCU FCU @ 275 CFM (TYP. TO 4)
FLEXIBLE CANVASS FLEXIBLE CANVASS #1 #1

COMPUTER 300x250 SAD VD
PROPERTY
MACHINE CONNECTION MACHINE CONNECTION
ROOM CLASS ROOM
750x300 SAD 750x300 SAD
400x300 SAD VD
600x600 RAG DRAWING CERTIFIED
SOLE
DATE: 8 / 27 / 2019
FCU#1
STORE
400x250 SAD 400x250 SAD CSTSD REF. NO. CB-0004
VD VD VD VD VD
THE
FLEXIBLE CANVASS
550x300 SAD 550x300 SAD MACHINE CONNECTION
ARE
400x300 SAD 300x250 SAD
VD VD VD VD VD
N
HEREI
VD VD VD
0 1.0 2.0 3.0 4.0 5.0
VD
400x250 SAD 400x250 SAD 300x250 SAD
METERS
VD VD VD
NED
1 : 50M
SCALE:
CONTAI
375x375 SCD 4-WAY
@ 366.7 CFM (TYP. TO 3) REVISION VALIDATION

375x375 SCD 4-WAY
ON
19U094-094
@ 366.7 CFM (TYP. TO 3)
NFORMATI
ZMA AAB EDB FSM

08/27/19 08/27/19 08/27/19 08/27/19
I
5 ENLARGE HVAC LAYOUT 6 ENLARGE HVAC LAYOUT 7 ENLARGE HVAC LAYOUT 00 08/27/19 ISSUED FOR CONSTRUCTION
THE
HA-001008 HA-001008 HA-001008 JOB ORDER/EWO NO.
SCALE 1 :50M SCALE 1 :50M SCALE 1 :50M THIS REVISION IS NOT TO BE USED FOR
SH 003 SH 003 SH 003
AND
DRAWING TYPE
PROPOSED ENLARGED HVAC LAYOUT HVA
NG
DRAWI
S
THI
KHGI-01
10-SEP-2019 10:21
091 K HA-001008 003 00

SAUDIARAMCO.
NOTES:
OF
CONSENT
TTEN
WRI
38 20
50
THE
THOUT
RE-USED EXT'G.
600
HANGER RODS
WI
EXISTING FLEXIBLE CANVASS 100
RE-USED EXT'G. MACHINE CONNECTION EXT'G. CONC. BEAM
HANGER RODS
NG
EXISTING PLENUM
DRAWI
BOX
S
THI
200x200
350
VD
(RE-INSTALLED FCU2)
600
FROM
TIE-IN
NED
OBTAI
EXT'G. HIGH WINDOW
BE
NEW DUCTWORKS RE- INSTALLED FCU EXSITING PLENUM BOX NEW DUCT EXIST'G DUCT
PART,SHALL
WORKS WORKS
NEW 1"{ CONDENSATE LINE

NEW 25MM WIRE MESH
TIE-IN TO EXISTING DRAIN LINE
REFERENCE DRAWINGS
N
I
FULL,OR
N
HA-001008
I
SCALE 1 :10M
SH 004
ON
REPRODUCTI
SAUDIARAMCO.NO
OF
BONDING JUMPER
DAMPER REGULATOR SET
6 AWG COPPER FLEXIBLE CONNECTION
PROPERTY
INSULATED GREEN
AIR DUCT
SHAFT EXTENSION
G.I. BAND
STEEL I BEAM MAX. WIDTH
152.4 WIDE GALVANIZED STEEL ANGLE
STEEL CORNER BEAD OF DUCT OR
SIZE
SOLE
DUCT
FAN IN MM. DRAWING CERTIFIED
FIBERGLASS INSULATION
0 - 1060 25x25x3 (1"x1"x„")
WITH FIRE RESISTANT
VAPOR BARRIER
DATE: 8 / 27 / 2019
DUCT 1061 - 2420 40x40x5 (1•"x1•"x‰")
THE
INSULATION
STICK PINS OVER - 2420 50x50x6 (2"x2"x‚") CSTSD REF. NO. CB-0004
GLASS FABRIC 10 DIA. BAR
UNIT HOUSING
ARE
TAPE
NO. 8x16 mm. OPPOSED BLADE
L BAR METAL SCREW
N
VOLUME CONTROL
HEREI
@ 150 O.C. (MAX.) DAMPER
NON-FLAMMABLE METAL SHEET METAL STEEL ANGLE

150 W 150
SEALER OVER ALL JOINTS "U" STRIP
AND MECHANICAL CLIP
NED
AIR DUCT
PERFORATION SCALE:
CONTAI
NON-FLAMMABLE
ADHESIVE MASTIC
REVISION VALIDATION
NOTE:
DUCT HANGER / SUPPORT SCHEDULE
CHANNEL FRAME THIS REVISION NO. 00 IS COVERED, FOR ALL APPROVAL AND CERTIFICATION
DUCT WIDTH HANGER SUPPORT SPACING L BAR SIZE REQUIREMENTS, PER SAEP-334, UNDER DRAWING COMPLETION CERTIFICATE NO:
1. FOR EXTERIOR DUCT, THICKNESS OF
NOTES:
ON
INSULATION IS 100mm W/ WEATHER PROOFED ABOVE 800 2000 50 x 50 x6 19U094-094
ALUMINUM SHEET CLADDING ALL AROUND
NFORMATI
6{ BOLT & NUT 1. MULTI-BLADE DAMPERS SHALL BE USED FOR
400 - 800 40 x 40 x6 3mm NEOPRENE DESIGN CERTIFICATION REVIEW FOR KEY DRAWINGS OTHER
2. FOR INTERIOR DUCT THICKNESS OF INSULATION IS 50mm 1500 DUCT WIDTH LARGER THAN 300 (12"). (DESIGN AGENCY) x REQUIRED (SAUDI ARAMCO)
RUBBER FLEXIBLE WITH WASHER @
40 x 40 x 5 CONNECTION 150mm O.C. (MAX.) ENGG./DATE CERTIFIED BY/DATE CONST. AGENCY/DATE OPERATIONS/DATE BY/DATE
BELOW 400 1200 ZMA AAB EDB FSM
2. FRAME NET AREA SHALL BE EQUAL TO 08/27/19 08/27/19 08/27/19 08/27/19
DUCT CROSS-SECTIONAL AREA. REV.NO. DATE REVISION DESCRIPTION
I
THE
JOB ORDER/EWO NO.
2 DUCT INSULATION DETAIL 3 RECTANGULAR DUCT HANGER DETAIL 4 FLEXIBLE CANVASS CONNECTION DETAIL 5 VOLUME DAMPER MOUNTING DETAIL
AND
HA-001008 HA-001008 HA-001008 HA-001008
SCALE NTS SCALE NTS SCALE NTS SCALE NTS
SH 004 SH 004 SH 004 SH 004 DRAWING TYPE
HVAC DETAILS & SECTIONS HVA
NG
DRAWI
S
THI
KHGI-01
10-SEP-2019 10:22
091 K HA-001008 004 00

SAUDIARAMCO.
LEGEND/SYMBOL/ABBR.: NOTES:
- HATCHED DENOTES NOT IN CONTRACT 1. ALL DIMENSIONS ARE IN MILLIMETERS UNLESS OTHERWISE
N (NIC)
SPECIFIED OR NOTED.
- AFFECTED EXISTING LIGHTING
2. CONTRACTOR TO VERIFY ON SITE THE ACTUAL CONDITION AND
EXIST'G WOOD WOOL ACOUSTIC PANEL (W.W.A.P.) TO REMAIN EXIST'G WOOD WOOL ACOUSTIC PANEL (W.W.A.P.) TO REMAIN FIXTURES TO BE REMOVED TEMPORARILY
' EXIST'G SUSPENDED DIMENSIONS OF THE STRUCTURE PRIOR TO BIDDING/AND OR
5 & SET ASIDE FOR RE-INSTALLATION
°1
7 ACOUSTIC TILES (S.A.T.) START OF ANY WORK.
11
TO BE REMOVE - AFFECTED EXISTING LIGHTING
MAKKAH 3. ANY NECESSARY ADJUSTMENTS ARISING FROM A DISCREPANCY
FIXTURES TO BE REMOVED TEMPORARILY
OF
1 BAY 2 BAY 2 BAY 2 BAY 2 BAY 2 BAY & SET ASIDE FOR RE-INSTALLATION BETWEEN EXISTING AND PROPOSED SHALL BE DONE WITH THE
ABLUTION
APPROVAL OF THE SAUDI ARAMCO REPRESENTATIVE PRIOR TO
RM 31 RM 8 RM 9 RM 10 RM 11 RM 12 +2900 +2900 - AFFECTED EXISTING CEILING DIFFUSERS
CONSENT
THE IMPLEMENTATION OF THESE WORKS.
+2600 +2600 TYP. TO BE REMOVED & REINSTALLED BY
CONTRACTOR. 4. STRUCTURAL STEEL SHAPES SHALL BE IN ACCORDANCE WITH
TYP.
ASTM A50 HAVING A MINUMUM YIELD STRENGTH OF 50 Ksi.
- AFFECTED EXISTING ACOUSTIC CEILING TILES,
STEEL PLATES & ANGLE BARS HAVING A MINIMUM YIELD
METAL FRAMING & HANGERS TO BE REMOVED STRENGTH OF 36 Ksi.
FCU-3 FCU-3 FCU-3 FCU-3 FCU-3 (BY CONTRACTOR)
TTEN
FCU-2
5. DESIGN, DETAILING & FABRICATION OF ALL WELDED CONNECTION
FCU-1 FCU-1 - EXISTING REINFORCED CONCRETE ROOF BEAMS
SHALL CONFORM TO THE AWS D1-1, STRUCTURAL WELDING CODE.
WRI
- EXISTING REINFORCED CONCRETE COLUMNS
+ 6050
6. CONTRACTOR SHALL ERECT ALL NECESSARY SAUDI ARAMCO
+7400
C - CENTER LINE
+ 7950
L SAFETY PRECAUTION AND BARRICADE AS PER SAUDI ARAMCO
THE
CONSTRUCTION SAFETY MANUAL.
FCU - FAN COIL UNIT
MULTI-PURPOSE HALL
-
TOILET APCS - ARAMCO PAINT COATING SYSTEM
DEMOLITION & NEW WORKS:
THOUT
(NIC) CONC. - CONCRETE
FCU-1 FCU-1 FCU-1 FCU-1 FCU-1 FCU-1 EXT'G. - EXISTING W/ - WITH 1. ALL EXISTING FAN COIL UNITS, CEILING DIFFUSERS &
FCU-2 AC DUCTS, AFFECTED BY THE WORK TO
WI
MAX. - MAXIMUM
C/W - COMPLETE WITH BE REMOVED & RE-INSTALLED BY THE CONTRACTOR.
PL. - PLATE
GALV. - GALVANIZED
NG
2. ALL EXISTING ACOUSTIC CEILING TILES, METAL FRAMING &
+ 8400 STD. - STANDARD HANGERS AFFECTED BY THE WORK TO BE REMOVED & REPLACED
DRAWI
- CONC. - CONCRETE
TYP. - TYPICAL BY THE CONTRACTOR.
C O R R I D O R (NIC) GA. - GAUGE
SDMH
3. ALL EXISTING EXPOSED RIGID STEEL ELECTRICAL CONDUITS,
ELECTRICAL PANEL BOARDS, LIGHTING FIXTURES, PROJECTORS
STAGE
S
& SMOKE DETECTORS AFFECTED BY THE WORK TO BE REMOVED
THI
& RE-INSTALLED BY THE CONTRACTOR.
REMOVE EXISTING STAGE
CURTAIN RAILS INCLUDING 4. ALL ITEMS MENTIONED ON NOTES 1 - 3 OF DEMOLITION AND NEW
FROM
WOODEN FRAMINGS AND WORKS MUST BE COMPLETED PRIOR TO INSTALLATION OF
PLYWOOD ENCASEMENTS NEW METAL DECKS.
5. ALL PAINTINGS IN ACCORDANCE WITH APCS-26T.
NED
(EXT'G. CANTLEVER SLAB W/ INVERTED BEAMS)
6. THE ANCHOR EMBEDMENT DEPTH SHOWN ON THE DRAWING IS
OBTAI
NOMINAL AND IF DELAMINATION OF THE CONCRETE AT THE
ANCHOR LOCATION IS ENCOUNTERED DURING THE INSTALLATION,
THEN THE EMBEDMENT DEPTH MUST BE INCREASED BY A
MINIMUM OF 50mm.
BE
Y
PART,SHALL
CONSTRUCTION NOTES:
I-HILTI ANCHORS
A
A
PRODUCT: HILTI HAS M12 C/W HIT-HY 200.
HOLE DIAMETER IN THE BASE & FIXTURE MATERIAL:14mm
INSTALLATION TORQUE:0.041 kNm
W
W
ACCESSORIES:
N
I
HILTI SAFE SET PACKAGE
K
FULL,OR
INSTALLATION PROCEDURE:
INSTALLATION CONDITION: DRY

L
L
DRILL BORE HOLES TO THE REQUIRED EMBEDMENT DEPTH
USING "AUTOMATIC SAFE SET CLEANING INSTALLATION AS
COVERED COURTYARD COVERED COURTYARD PER ESR-3187".
A
N
FOR DETAILED INFORMATION ON INSTALLATION SEE INSTRUCTION
I
FOR USE GIVEN WITH THE PACKAGE OF THE PRODUCT.
ON
W
W
II-STEEL DECKS
REPRODUCTI
PRODUCT: CANAM P-3615 OR P-3606 OR EQUALLY APPROVED,
COMPLETE WITH STANDARD SCREWS, WASHERS & CAP.
REFERENCE DRAWINGS
DWG. CONTROL FOR J.O.# 19U123 UD REF. #CB-0004
SAUDIARAMCO.NO
PROP. REFLECTED CEILING PLAN RA-004350 SHT.002
BEAM SECTION/DETAIL RA-004350 SHT.003
ENLARGED PLAN/ SECTION RA-004350 SHT.004

GUARD & ANNEX PLAN & DETAIL RA-004350 SHT.005
FCU-1 ENLARGED PLAN/SEC/DET RA-004350 SHT.006

C O R R I D O R (NIC) C O R R I D O R
OF
9
PROPERTY
RA-004350
FCU-1 FCU-1 FCU-1 SH 005
+6050
+6050
ENTRANCE
TOILET
(NIC) -
(NIC)
SOLE
ELEC.
ROOM
DRAWING CERTIFIED
THE
DATE: 8 / 27 / 2019
+2900 + 2900
+2900 +2900
- - CSTSD REF. NO. CB-0004
ARE
TYP. TYP. TYP.
3 BAYS 3 BAYS 3 BAYS 1-BAY 1-BAY 2-BAY 1-BAY 1-BAY 1-BAY 1-BAY 3 BAYS
N
RM 2 RM 1 RM 29 RM 28 RM 27 RM 26 RM 25 RM 24 RM 23 RM 22 RM 21
HEREI
0 1.0 2.0 3.0 4.0 5.0 10.0 12.0
EXIST'G WOOD WOOL ACOUSTIC EXIST'G SUSPENDED ACOUSTIC TILES (S.A.T.) TO BE REMOVE EXIST'G SUSPENDED ACOUSTIC TILES (S.A.T.) TO BE REMOVE
PANEL (W.W.A.P.) TO REMAIN
METERS
NED
SCALE: 1 : 125M
1 EXISTING REFLECTED CEILING PLAN
CONTAI
RA-004350
SCALE 1 :00M
SH 001
REVISION VALIDATION

7
ON
19U094-094
RA-004350
NFORMATI
SH 001 DESIGN CERTIFICATION REVIEW FOR KEY DRAWINGS OTHER
1 (DESIGN AGENCY) x REQUIRED (SAUDI ARAMCO)
RA-004350 ENGG./DATE CERTIFIED BY/DATE CONST. AGENCY/DATE OPERATIONS/DATE BY/DATE
SH 005 ZMA AAB EDB FSM

08/27/19 08/27/19 08/27/19 08/27/19

MSA STORAGE
I
NIC 5 ROOM
THE
RA-004350 JOB ORDER/EWO NO.
SH 005 GUARD QTBE-01 19U094

HOUSE
AND
DRAWING TYPE
EXIST'G REFLECTED CEILING PLAN SDT
NG
DRAWI
NIC
NIC
SCECO SCHOOLS BOY'S ELEMENTARY
SCECO
ROOM GATE
ROOM QATIF SAUDI ARABIA
S
THI
dd%mm%yy
088 M RA-004350 001 00
REFERENCE DRAWINGS

SAUDIARAMCO.
NOTES:
N
SPECIFIED OR NOTED.
'
5 2. OTHER NOTES SEE DRAWING NO. RA-004350, SHEET 001.
7
°1 1
11
RA-004350
MAKKAH SH 003
OF
ABLUTION 1 BAY 2 BAY 2 BAY 2 BAY 2 BAY 2 BAY SIMILAR 1
RM 8 RM 9 RM 10 RM 11 RM 12 +2900 RA-004350 +2900
RM 31
CONSENT
SH 003
2 +2600 +2600 TYP.
1
ANGLE
RA-004350 TYP.
RA-004350
SH 003
SH 003
TTEN
FCU-2
FCU-1 FCU-1
WRI
+ 6050
(NIC) - HATCHED DENOTES NOT IN CONTRACT
MULTI-PURPOSE HALL
+7400
+ 7950
- NEW GALVANIZED METAL DECK, (UNDERNEATH
THE
TO BE PAINTED WITH APCS-26T).
-
TOILET
- RE-INSTALLED LIGHTING FIXTURES
THOUT
(NIC)
FCU-1 FCU-1 FCU-1 FCU-1 FCU-1 FCU-1

FCU-2 - RE-INSTALLED LIGHTING FIXTURES
WI
- RE-INSTALLED LIGHTING FIXTURES
NG
8400
DRAWI
FCU - RE-INSTALLED FAN COIL UNITS
C O R R I D O R (NIC) (BY CONTRACTOR)
SDMH
S
THI
STAGE
FROM
7
NED
RA-004350
SH 003
OBTAI
REFERENCE DRAWINGS
BE
EXIST'G REFLECTED CEILING PLAN RA-004350 SHT.001
M
M
Y
PART,SHALL
O
O
A
A
O
O
W
W
R
R
C)
C)
C)
N
I
NI
NI
NI
K
FULL,OR
S
S
(
(
Q Q Q
a #
QQ$ # # #Q g BUILT-UP AREA
# Q
$
#
L
L
$
A
$
This AREA
S
S
BUILT
$
UP
$ g
COVERED COURTYARD COVERED COURTYARD $
A
A
A$ $
N
A
A
$
I
U
W
ON
W
U
W
REPRODUCTI
L
L
BUILT
UP
$
C
C
$
QTBE01
$
$
QTBI01 $
SAUDIARAMCO.NO
q
UU
U BUILT-UP AREA
C O R R I D O R (NIC) C O R R I D O R BUILT
UP
OF
9
PROPERTY
RA-004350
L O C A T I O N P L A N
FCU-1 FCU-1 FCU-1 SH 005 N O T T O S C A L E
+6050
ENTRANCE
TOILET
(NIC)
(NIC)
SOLE
ELEC.
ROOM
DRAWING CERTIFIED
THE
DATE: 8 / 27 / 2019
+2900 +2900 2900 CSTSD REF. NO. CB-0004
-
ARE
TYP. TYP.
N
HEREI
1 SIMILAR 0 1.0 2.0 3.0 4.0 5.0 10.0 12.0
RA-004350 1 SIMILAR
SH 004
RA-004350 1 SIMILAR METERS
SH 004
RA-004350
NED
SH 004 SCALE: 1 : 125M
1 PROPOSED METAL DECK PLAN
CONTAI
RA-004350
SCALE 1 :125M
SH 001
REVISION VALIDATION

7
ON
19U094-094
RA-004350
NFORMATI
SH 001 DESIGN CERTIFICATION REVIEW FOR KEY DRAWINGS OTHER
1 (DESIGN AGENCY) x REQUIRED (SAUDI ARAMCO)
RA-004350 ENGG./DATE CERTIFIED BY/DATE CONST. AGENCY/DATE OPERATIONS/DATE BY/DATE
SH 005 ZMA AAB EDB FSM

08/27/19 08/27/19 08/27/19 08/27/19

MSA STORAGE
I
5 ROOM
THE
JOB ORDER/EWO NO.
RA-004350
SH 005 GUARD QTBE-01 19U094
HOUSE
AND
DRAWING TYPE
PROP. STEEL FRAMING SUPPORT SDT
NG
DRAWI
NIC
SCECO
ROOM GATE
S
THI
dd%mm%yy
088 M RA-004350 002 00

SAUDIARAMCO.
NEW GA.20X38MM NOTES:
+2600
P-3606 OR P-3615 OR
EQUALLY APPROVED 1. ALL DIMENSIONS ARE IN MILLIMETERS UNLESS OTHERWISE
200 +2900 200 NEW L100X100X10mm THK.
EXT'G. CONC. ROOF SLAB BY PROPONENT SPECIFIED OR NOTED.
W/ EXT'G. ROOF STEEL DECK TYP.
NEW L100X100X10MM THK. (TYP.)
WATERPROOFING MEMBRANE 2. OTHER NOTES SEE DRAWING NO. RA-004350, SHEET 001.
NEW GA.18X38MM EXT'G. CONC. ROOF SLAB
NEW GA.18X38mm
GAP
P-3606 OR P-3615 OR
MAX.
+650
P-3606 OR P-3615 OR W/ EXT'G. ROOF
OF
EQUALLY APPROVED WATERPROOFING MEMBRANE
EQUALLY APPROVED
BY PROPONENT
20
STEEL DECK TYP.
CONSENT
STEEL DECK TYP.
200
38
138
350
110
350
160
TTEN
NEW 10
20
IPE-160 BEAM
20
NEW IPE-160
38
WRI
STEEL BEAM
115
FCU-2
THE
100
43
+1900
NEW HILTI HAS,GALV. 5 NEW #5/16-24 KWIK-FLEX
+650
NEW PL.
NEW HILTI HAS,GALV.
1896
THREADED STEEL ROD M12, RA-004350 SELF DRILLING SCREWS
THOUT
SH 004
THREADED STEEL ROD M12, FIXED @ EACH CORRUGATION
LENGTH 100MM TYP.
LENGTH 100MM TYP.
WI
EXT'G. CONC. BEAM
NG
DRAWI
100
EXT'G. CONC. BEAM
5 5
S
3
THI
RA-004350 RA-004350
RA-004350 SH 003
SH 003
SH 003
+1900
FROM
3 NEW IPE-160
1896
RA-004350 STEEL BEAM
SH 003 (TYP.)
NED
+7400
NEW IPE-160
OBTAI
+7950
STEEL BEAM
3 TYP. SECTION DETAIL 4 TYPICAL DETAIL

RA-004350 RA-004350
BE
SH 003 SH 003
PART,SHALL
NEW GA.20X38MM
P-3606 OR P-3615 OR
EQUALLY APPROVED
+1900
BY PROPONENT
NEW GA.20X38mm
1896
STEEL DECK TYP.
P-3606 OR P-3615 OR NEW GA.20X38MM
EQUALLY APPROVED P-3606 OR P-3615 OR REFERENCE DRAWINGS
STEEL DECK TYP. EQUALLY APPROVED
N
EXT'G. CONC. ROOF SLAB DWG. CONTROL FOR J.O.# 19U123 UD REF. #CB-0004
I
W/ EXT'G. ROOF BY PROPONENT
FULL,OR
WATERPROOFING MEMBRANE STEEL DECK TYP.
GAP
MAX.
110
20
N
I
38
ON
FCU-1
1446
REPRODUCTI
+1900
160
NEW NEW
RE-INSTALLED LIGHTING IPE-160 BEAM IPE-160 BEAM
FIXTURES, TYP.
SAUDIARAMCO.NO
200
+650
RM 31
170
CONT. ANGLE BAR LEDGER NEW PL. 6 85 85
7 RA-004350
7 NEW L100X100X10MM THK. SH 003 30 30
RA-004350
CONT. ANGLE BAR LEDGER NEW HILTI HAS,GALV. THREADED
RA-004350 SH 003
SH 003 STEEL THROUGH ANCHOR RODS NEW IPE-160 BEAM
M12, C/W HIT-HY 200 TYP.
10
OF
90
DRILL 2-{14MM HOLES
180
EXT'G. CONC. BEAM
PROPERTY
FOR M12 ANCHOR RODS
ENLARGED PARTIAL
90
1 ENLARGED PARTIAL REFLECTED CEILING PLAN (TYP.) 2 REFLECTED CEILING PLAN (TYP.)
P
L10X170X180
RA-004350 RA-004350
10
SH 002 SH 002
DRAWING CERTIFIED
SOLE
TYP. DATE: 8 / 27 / 2019
5 TYP. SECTION DETAIL 6
RA-004350
SCALE 1 : 5M CSTSD REF. NO. CB-0004
SH 003
THE
6 STEEL END PL. DETAIL (TYP.)
RA-004350
SCALE 1 : 5M
ARE
SH 003
N
HEREI
0 1.0 2.0 3.0 4.0 5.0 10.0
METERS
EXT'G. CONC. ROOF SLAB W/ EXT'G. ROOF NEW GA.18X38mm
NED
WATERPROOFING MEMBRANE P-3606 OR P-3615 OR SCALE: 1 : 100M
4
CONTAI
6 EQUALLY APPROVED
RA-004350
STEEL DECK TYP.
SH 003 RA-004350
REVISION VALIDATION
TYP. THIS REVISION NO. 00 IS COVERED, FOR ALL APPROVAL AND CERTIFICATION
100 C
63
33
ON
19U094-094
NFORMATI
167
ZMA AAB EDB FSM

08/27/19 08/27/19 08/27/19 08/27/19
NEW GA.20X38mm
P-3606 OR P-3615 OR NEW GA. 22 PRE-PAINTED
I
METAL SHT. CLOSURE, TYP. 00 08/27/19 ISSUED FOR CONSTRUCTION
EQUALLY APPROVED
THE
STEEL DECK TYP. JOB ORDER/EWO NO.
APPROVED SELF DRILLING 19U094 CONSTRUCTION UNTIL CERTIFIED AND DATED

PL. 10X170X180
EXT'G. WINDOW SCREWS @ 300mm O.C.,
EXT'G. CONC. BEAM
AND
NEW IPE-160
TYP.
STEEL BEAM DRAWING TYPE
1000 BEAM SECTION/DETAIL SDT
NG
DRAWI
+1083
ANCHOR RODS
SCHOOLS BOY'S ELEMENTARY
7 QATIF SAUDI ARABIA

SECTION DETAIL (TYP.) 250 167 83
QTBE-01
S
THI
RA-004350
SCALE 1 : 25M
SH 003
dd%mm%yy
088 M RA-004350 003 00

SAUDIARAMCO.
NOTES:
5 1. ALL DIMENSIONS ARE IN MILLIMETERS UNLESS OTHERWISE

RA-004350 SPECIFIED OR NOTED.
SH 004
2. OTHER NOTES SEE DRAWING NO. RA-004350, SHEET 001.
200 +2900 200
EXT'G. CONC. ROOF DECK
OF
NEW L100X100X10MM THK. EXT'G. CONC. TAPERED
CONT. ANGLE BAR LEDGER CANTILEVER BEAM
3
CONSENT
NEW GA.18X38MM
P-3606 OR P-3615 OR RA-004350
+650
BY PROPONENT
STEEL DECK TYP.
175 700 700 700 700 100
200
TTEN
350
WRI
NEW HILTI HAS M12,
ANCHOR BOLT (TYP.)
THE
NEW APPROVED SEALANT,
NEW IPE-160 EXT'G. CONC. COL. TYP.
STEEL BEAM TYP.
THOUT
METAL SHT. CLOSURE,
JW4X102 COLD FORMED
+1900
C-SECTION, TYP.
WI
RE-INSTALLED LIGHTING APPROVED SELF DRILLING
NEW 2-#5/16-24 KWIK-FLEX
FIXTURES, TYP. NEW GA.18X38MM SCREWS @ 300MM O.C.,
NG
P-3606 OR P-3615 OR TYP.
FIXED @ EACH CORRUGATION, TYP.
EQUALLY APPROVED
DRAWI
BY PROPONENT
STEEL DECK TYP.
50
+3075
S
THI
FROM
RA-004350
SCALE 1 : 10M
+6050
SH 004
NED
+1900
5 3
OBTAI
RA-004350 RA-004350
SH 003 SH 003
BE
200
PART,SHALL
EXT'G. CONC. TAPERED
CANTILEVER BEAM
200
CAULKING/SEALANT
NEW HILTI HAS,GALV. THREADED EXISTING CANTILEVER

+1900
N
STEEL ROD M12, C/W HIT-HY 200 ROOF SLAB
I
NEW #12 SDS WITH
W/ EMBEDED LENGTH 150MM TYP.
REFERENCE DRAWINGS
FULL,OR
PLASTIC FISHER @ 300
NEW GA.20X38MM
EXT'G. CONC. ROOF SLAB DWG. CONTROL FOR J.O.# 19U123 UD REF. #CB-0004
50
P-3606 OR P-3615 OR
EQUALLY APPROVED EXIST'G REFLECTED CEILING PLAN RA-004350 SHT.001
110
BY PROPONENT PROP. REFLECTED CEILING PLAN RA-004350 SHT.002
STEEL DECK TYP. 20
TYP.
N
20
150
I
NEW GA. 20 PRE-PAINTED GUARD & ANNEX PLAN & DETAIL RA-004350 SHT.005
200
ALUMIMUM FLASHING FCU-1 ENLARGED PLAN/SEC/DET RA-004350 SHT.006
ON
110
REPRODUCTI
NEW #12 SDS @ 300
38 50

NEW STEEL DECK 150
SAUDIARAMCO.NO
NEW 2-#5/16-24 KWIK-FLEX
JW4X102 COLD FORMED
FIXED @ EACH CORRUGATION, TYP.
C-SECTION, TYP.
1 ENLARGED PARTIAL REFLECTED CEILING PLAN (TYP.)
RA-004350
SCALE 1 : 25M
SH 002
4 TYP. EDDGE FLASHING DETAIL

RA-004350
RA-004350 SCALE 1 :5M
SCALE 1 : 5M SH 004
SH 004
OF
DRAWING CERTIFIED
PROPERTY
DATE: 8 / 27 / 2019
SOLE
0 0.1 0.2 0.3 0.4 0.5 1.0
THE
METERS
ARE
1 : 10M
0 0.5 1.0 1.5
METERS
N
EXT'G. CONC. ROOF SLAB W/ EXT'G. ROOF NEW GA.18X38mm
HEREI
WATERPROOFING MEMBRANE P-3606 OR P-3615 OR 1 :15M
4 EQUALLY APPROVED 0 0.5 1.0 2.0
5
RA-004350 STEEL DECK TYP.
SH 004 RA-004350 METERS
NED
C TYP. SCALE: 1 : 25M
CONTAI
100
20
REVISION VALIDATION
38
100
ON
19U094-094
NEW GA.20X38mm
NFORMATI
P-3606 OR P-3615 OR NEW GA. 22 PRE-PAINTED DESIGN CERTIFICATION REVIEW FOR KEY DRAWINGS OTHER
EQUALLY APPROVED METAL SHT. CLOSURE, TYP. (DESIGN AGENCY) x REQUIRED (SAUDI ARAMCO)
STEEL DECK TYP. ENGG./DATE CERTIFIED BY/DATE CONST. AGENCY/DATE OPERATIONS/DATE BY/DATE
ZMA AAB EDB FSM

08/27/19 08/27/19 08/27/19 08/27/19
APPROVED SELF DRILLING
PL. 10X170X180 150
EXT'G. WINDOW 100 50 SCREWS @ 300mm O.C., REV.NO. DATE REVISION DESCRIPTION
EXT'G. CONC. BEAM
I
NEW IPE-160 TYP. 00 08/27/19 ISSUED FOR CONSTRUCTION
STEEL BEAM 600
THE
NEW L100X100X10mm THK. JOB ORDER/EWO NO.
CONT. ANGLE BAR LEDGER +650
AND
ANCHOR RODS
DRAWING TYPE
ENLARGED PLAN/ SECTION SDT

NG
DRAWI
RA-004350
SCALE 1 : 15M
SH 004
QATIF SAUDI ARABIA

QTBE-01
S
THI
dd%mm%yy
088 M RA-004350 004 00

SAUDIARAMCO.
NOTES:

SPECIFIED OR NOTED.
2 SIMILAR DETAIL
RA-004350 NEW GA.20X38mm 2. NEW LIQUID APPLIED MEMBRANE- WATERPROOFING L.A.W.
+5050
SH 004 P-3606 OR P-3615 OR SYSTEM ON THE ENTIRE ROOF OF ANNEX BUILDING.
EQUALLY APPROVED
+3450 3. PROVIDE NEW LIGHT- WEIGHT CONCRETE (VERMICULITE) ON
STEEL DECK TYP. 100 700 +3450 700 100 100 700 +3450 700 100
CONCRETE ROOF DECK OF ANNEX BUILDING TO RECEIVE
OF
+3450
100
100
200 +1400 +1650 200 2% SLOPE.
RD RD
CONSENT
100
100
4. CANTILEVER CONCRETE SLAB SOFFIT ALL ARROUND THE
200
GUARD ROOM NEEDS TO BE REPAIR (IF DAMAGE) AND
REPAINT TO MATCH WITH EXISTING AS PER SAUDI
2% SLOPE
NEW ARAMCO STANDARD.
L100X100X10mm THK.
CONT. ANGLE BAR, TYP.
TTEN
+3450
+3450
WI
WI
+3450
+3050
+4450
NDOW
NDOW
WRI
NEW L.A.M. ON NEW
2% SLOPE
WI
WI
REMOVE EXISTING VERMICULITE LIGHTWEIGHT
NDOW
NDOW
WATERPROOFING & CONC. VARIES IN THICKNESS
THE
SURFACE OF ROOF SLAB (MIN. 50mm)
TO BE CLEAN/ROUGHENED
THOUT
200
WINDOW
700
700
WINDOW
WI
NEW IPE-160
100
100
STEEL BEAM
RD RD
NG
REFER NOTE #4
DRAWI
GUARD ROOM GUARD ROOM GUARD ROOM GUARD ROOM
S
1 EXISTING REFLECTED CEILING 2 PROPOSED REFLECTED CEILING PLAN 3 EXISTING ROOF PLAN 4 PROPOSED ROOF PLAN
THI
RA-004350 RA-004350 RA-004350 RA-004350 L.A.M.- LIQUID APPLIED MEMBRANE
1 :50M SCALE 1 :50M 1 :50M 1 :50M
SH 005 SH 005 SH 005 SH 005
FROMNED
OBTAI
200
BE
5000
PART,SHALL
2700
120
NEW PL. 12
3200
6
25
N
I
FULL,OR
400
200
4000
3350
NEW IPE-160 BEAM
12 REFERENCE DRAWINGS
N
I
RA-006280 DWG. CONTROL FOR J.O.# 19U123 UD REF. #CB-0004
ON
REMOVE EXISTING
3700
SH 005
REMOVE EXISTING EXIST'G REFLECTED CEILING PLAN RA-004350 SHT.001
REPRODUCTI
WATERPROOFING &
WATERPROOFING & PROP. REFLECTED CEILING PLAN RA-004350 SHT.002
SURFACE OF ROOF SLAB
TO BE CLEAN/ROUGHENED BEAM SECTION/DETAIL RA-004350 SHT.003
TO BE CLEAN/ROUGHENED

REMOVE EXISTING FCU-2 ENLARGED PLAN/SEC/DET RA-004350 SHT.007
WATERPROOFING &
SAUDIARAMCO.NO
TO BE CLEAN/ROUGHENED 11 ENLARGED DETAIL, TYP.
MSA ROOM STORAGE ROOM ELEC. ROOM
RA-004350
NTS
SH 005
5 EXISTING ROOF PLAN 7 EXISTING ROOF PLAN 9 EXISTING ROOF PLAN

EXT'G. CONC.
RA-004350 RA-004350 RA-004350
1 :50M 1 :50M 1 :50M ROOF SLAB
SH 005 SH 005 SH 005
NEW GA.20X38mm
P-3606 OR P-3615 OR
OF
EQUALLY APPROVED
EXISTING STEEL DECK TYP.
PROPERTY
INVERTED BEAM
NEW CONC. FILL
DRAWING CERTIFIED
38 20
5000
SOLE
DATE: 8 / 27 / 2019
2700 CSTSD REF. NO. CB-0004
230
THE
160
ARE
3200
12
N
HEREI
NEW PAINT FINISH, @
0 1.0 2.0 3.0 4.0 5.0
200
BOTH SIDES, COLOR TO
4000
MATCH EXT'G.
METERS
2% SLOPE
NED
2% SLOPE
3350
NEW 400mm LONG

SCALE: 1 : 50M
CONC. BASE
CONTAI
NEW 4-{12 CONT. REVISION VALIDATION
NEW L.A.M. ON NEW
3700
2% SLOPE
RD BARS W/ 4-{8 TIES
VERMICULITE LIGHTWEIGHT THIS REVISION NO. 00 IS COVERED, FOR ALL APPROVAL AND CERTIFICATION
CONC. VARIES IN THICKNESS REQUIREMENTS, PER SAEP-334, UNDER DRAWING COMPLETION CERTIFICATE NO:
NEW L.A.M. ON NEW NEW 2-{12 VERT.
ON
(MIN. 50mm) 19U094-094
VERMICULITE LIGHTWEIGHT BARS
NFORMATI
400
CONC. VARIES IN THICKNESS DESIGN CERTIFICATION REVIEW FOR KEY DRAWINGS OTHER
(MIN. 50mm) (DESIGN AGENCY) x REQUIRED (SAUDI ARAMCO)
NEW CONC. FILL
NEW L.A.M. ON NEW ENGG./DATE CERTIFIED BY/DATE CONST. AGENCY/DATE OPERATIONS/DATE BY/DATE
VERMICULITE LIGHTWEIGHT ZMA AAB EDB FSM

08/27/19 08/27/19 08/27/19 08/27/19
CONC. VARIES IN THICKNESS EXT'G. CMU WALL
ELEC. ROOM REV.NO. DATE REVISION DESCRIPTION
(MIN. 50mm)
I
MSA ROOM STORAGE ROOM
THE
JOB ORDER/EWO NO.
PROVIDE CONC. STOPPER 19U094 CONSTRUCTION UNTIL CERTIFIED AND DATED
(CAULKING/FOAM), AS
AND
REQUIRED
6 PROPOSED ROOF PLAN 8 PROPOSED ROOF PLAN 10 PROPOSED ROOF PLAN DRAWING TYPE
GUARD & ANNEX PLAN & DETAIL SDT

RA-004350 RA-004350 RA-004350
1 :50M 1 :50M 1 :50M
NG
SH 005 SH 005 SH 005
DRAWI
12 SECTION DETAIL, TYP.
RA-004350
NTS
QATIF SAUDI ARABIA
SH 005
QTBE-01
S
THI
dd%mm%yy
088 M RA-004350 005 00

SAUDIARAMCO.
NOTES:

SPECIFIED OR NOTED.
OF
CONSENT
TTEN
NEW HILTI HAS,GALV.
RA-004350 THREADED STEEL ROD M12,
TYP.
WRI
LENGTH 100mm TYP.
(SITE VERIFY)
THE
RA-004350
SH 006
CONT. ANGLE BAR
50
THOUT
25
38
WI
EXT'G. CONC. BEAM
600
NG
NEW IPE-160 RE-USED EXT'G.
726
DRAWI
STEEL BEAM HANGER RODS
100
(RE-INSTALLED FCU)
S
355
THI
EXT'G. CONC. BEAM
FROM
600
NED
OBTAI
NEW L30X30X5mm THK. (SITE VERIFY) SITE VERIFY)
WELDED TO NEW L-65X50X6 SITE VERIFY
BE
EXT'G. HIGH WINDOW
PART,SHALL
NEW GA.20X38mm 2 TYP. FCU FIXING DETAIL
P-3606 OR P-3615 OR RA-004350
SCALE 1 :10M
STEEL DECK TYP.
N
I
FULL,OR
REFERENCE DRAWINGS
N
I
TO BE RE-INSTALLED ENLARGED PLAN/ SECTION RA-004350 SHT.004
ON
FCU-1 (BY PROPONENT) EXT'G. WOOL NEW L100X100X10mm THK. GUARD & ANNEX PLAN & DETAIL RA-004350 SHT.005
REPRODUCTI
NEW GA.20X38mm
P-3606 OR P-3615 OR
EQUALLY APPROVED
STEEL DECK TYP.
SAUDIARAMCO.NO
NEW L65X50X6mm THK.
ANGLE BAR FCU SUPPORT, TYP.
WELDED TO ANGLE BAR
NEW L65X50X6mm THK.
38
WELDED TO ANGLE BAR
NEW IPE-160 40
40
OF
STEEL BEAM
PROPERTY
RE-USED EXT'G.
HANGER RODS
(SITE VERIFY)
NEW L30X30X5mm THK.

DRAWING CERTIFIED
SOLE
WELDED TO NEW L-65X50X6 DATE: 8 / 27 / 2019
1 ENLARGED PLAN OF TYP. CEILING MOUNTED FCU CSTSD REF. NO. CB-0004
THE
RA-004350
NTS
SH 006
(RE-INSTALLED FCU)
ARE N
HEREINED
SCALE:
CONTAI
REVISION VALIDATION
(SITE VERIFY)
(SITE VERIFY)
ON
19U094-094
NFORMATI
ZMA AAB EDB FSM

08/27/19 08/27/19 08/27/19 08/27/19
3 SECTION DETAIL REV.NO. DATE REVISION DESCRIPTION
I
RA-004350
N.T.S.
SH 006
THE
JOB ORDER/EWO NO.
AND
DRAWING TYPE
NG
DRAWI
QATIF SAUDI ARABIA

QTBE-01
S
THI
dd%mm%yy
088 M RA-004350 006 00

SAUDIARAMCO.
NOTES:
SPECIFIED OR NOTED.
OF
CONSENT
3 NEW HILTI HAS,GALV.
RA-004350 THREADED STEEL ROD M12,
LENGTH 100mm TYP.
TTEN
38 20
WRI
50
THE
NEW IPE-160
STEEL BEAM
THOUT
RE-USED EXT'G.
600
5 HANGER RODS
5
100
WI
EXT'G. CONC. BEAM
(RE-INSTALLED FCU)
NG
2
DRAWI
RA-004350
NEW L100X100X10mm THK. EXT'G. CONC. BEAM
SH 007
CONT. ANGLE BAR
S
THI
600
(SITE VERIFY) SITE VERIFY)
FROM
SITE VERIFY)
+1898
NED
OBTAI
EXT'G. HIGH WINDOW
(
BE
PART,SHALL
SITE VERIFY)
RA-004350
SCALE 1 :10M
SH 007
TO BE RE-INSTALLED
FCU2 (BY PROPONENT)

+1898
N
I
FULL,OR
EXT'G. WOOL NEW L100X100X10mm THK.
NEW GA.20X38mm
N
EXT'G. CONC. ROOF SLAB NEW GA.20X38mm
I
P-3606 OR P-3615 OR
W/ EXT'G. ROOF P-3606 OR P-3615 OR
EQUALLY APPROVED
ON
WATERPROOFING MEMBRANE EQUALLY APPROVED
STEEL DECK TYP.
STEEL DECK TYP.
REPRODUCTI
REFERENCE DRAWINGS
NEW L65X50X6mm THK.
WELDED TO ANGLE BAR EXIST'G REFLECTED CEILING PLAN RA-004350 SHT.001
LEDGER & IPE-160 BEAM PROP. REFLECTED CEILING PLAN RA-004350 SHT.002
TYP.
SAUDIARAMCO.NO
3820
NEW L65X50X6mm THK.
WELDED TO ANGLE BAR
NEW IPE-160
65
STEEL BEAM
VERIFY)
50
RE-USED EXT'G.
(SITE VERIFY)
OF
HANGER RODS
PROPERTY
DRAWING CERTIFIED
SOLE
1 ENLARGED PLAN OF TYP. CEILING MOUNTED FCU-2 DATE: 8 / 27 / 2019
(RE-INSTALLED FCU)
RA-004350
NTS
SH 007
THE
ARE N
HEREINED
SCALE:
CONTAI
(SITE VERIFY)
REVISION VALIDATION

ON
19U094-094
NFORMATI
3 SECTION DETAIL DESIGN CERTIFICATION REVIEW FOR KEY DRAWINGS OTHER
RA-004350
N.T.S.
SH 007 ENGG./DATE CERTIFIED BY/DATE CONST. AGENCY/DATE OPERATIONS/DATE BY/DATE
ZMA AAB EDB FSM

08/27/19 08/27/19 08/27/19 08/27/19
I
THE
JOB ORDER/EWO NO.
AND
DRAWING TYPE
NG
DRAWI
QATIF SAUDI ARABIA

QTBE-01
S
THI
dd%mm%yy
088 M RA-004350 007 00

SAUDIARAMCO.
NOTES:
N OTHERWISE SPECIFIED OR NOTED.
2. THE CONTRACTOR SHALL VERIFY THE EXISTING SITE

CONDITION AND FIELD DIMENSIONS PRIOR TO START
'
5
°1 OF WORKS
7
11
3. SCHEDULE EXISTING AIR CONDITIONING UNIT FOR

MAKKAH
PREVENTIVE MAINTENANCE PRIOR TO RE-USE.
OF
1 BAY 2 BAY 2 BAY 2 BAY 2 BAY 2 BAY
ABLUTION
EXISTING FCU TO REMAIN (TYPICAL) 4. REMOVE UNNECESSARY MATERIALS AND EXISTING
RM 31 RM 8 RM 9 RM 10 RM 11 RM 12
CONSENT
DUCTWORKS FROM WORK SITE AND DISPOSE ALL
MATERIALS AS PER INSTRUCTION OF THE SAUDI
ARAMCO PROJECT ENGINEER.
FA FA FA
FA FA FA FA FA
5. ALL DUCTWORK SHALL BE FABRICATED AND
INSTALLED IN ACCORDANCE WITH SMACNA,
FCU TO BE REMOVED & INTERNATIONAL MECHANICAL CODE (IMC) AND OTHER
TTEN
SET ASIDE FOR RE-USE APPLICABLE SAUDI ARAMCO & NFPA STANDARDS.
(TYPICAL) FCU#3 FCU#3 FCU#3 FCU#3 FCU#3
FCU#2 6. EXTEND & RECONNECT NEW FRESH AIR DUCT TO
WRI
FCU#3
EXISTING SUPPLY AIR GRILLE EXISTING FRESH AIR DUCT.
TO BE REMOVED FCU#1 FCU#1 FA
7. PROVIDE 50MM THICK FIBERGLASS INSULATION TO
THE
NEW DUCTWORKS.
MULTI-PURPOSE HALL
FCU#1 FCU#1 FCU#1 FCU#1 FCU#1 FCU#1 TOILET 8. INSTALL NEW CONDENSATE DRAIN COMPLETE WITH
EXISTING RETURN AIR GRILLE (NIC)
THOUT
(NIC) P-TRAP.
TO BE REMOVED FCU#2
9. BALANCE THE AIR DISTRIBUTION SYSTEM TO +10% OF
THE REQUIRED AIR FLOW AS PER SAES-K-001,
SECTION 6.
WI
10. CUT AND REMOVED PORTION OF CHILLED WATER
NG
FA FA FA FA FA FA FA SUPPLY AND RETURN LINES AFFECTED BY THE
DRAWI
RELOCATION OF THE EXISTING FAN COIL UNITS.
C O R R I D O R (NIC)
SDMH 11. EXTEND THE EXISTING CHILLED WATER SUPPLY AND
RETURN LINES COMPLETE WITH INSULATIONS TO THE
NEW LOCATION OF FAN COIL UNITS. CONNECT/TIE-IN
STAGE
S
TO EXISTING CHILLED WATER LINES.
THI
CLASS RM. CLASS RM. CLASS RM.
12. FOR OTHER INFORMATION REFER TO SCOPE OF
(NIC) (NIC) (NIC) WORKS.
FROMNED
OBTAI
(NIC) (NIC) (NIC)
BE
Y
PART,SHALL
(NIC) (NIC) (NIC)
A
A
W
W
REFERENCE DRAWINGS
N
(NIC) (NIC) (NIC)
I
K
FULL,OR
L
L
CLASS RM. COVERED COURTYARD CLASS RM. COVERED COURTYARD CLASS RM.
A
A
(NIC) (NIC) (NIC)
N
I ON
W
REPRODUCTI
CLASS RM. CLASS RM. CLASS RM. LEGEND
(NIC) (NIC) (NIC)

ITEMS TO BE REMOVED
(NIC) NOT IN CONTRACT
SAUDIARAMCO.NO
CLASS RM. CLASS RM. CLASS RM. FCU FAN COIL UNIT
(NIC) (NIC) (NIC)
PORTION OF FRESH AIR DUCT TO
BE CUT AND REMOVED (TYPICAL)
FA FA FA FA FA FA FA FA FA FA FA FA FA FA FA FA FA FA
OF
RETURN AIR GRILLE RETURN AIR GRILLE TO BE REMOVED
TO BE REMOVED SET ASIDE FOR RE-USE (TYPICAL)
PROPERTY
(TYPICAL) VD VD VD VD VD VD VD VD VD VD VD VD VD VD VD
SUPPLY & RETURN DUCT WORK TO

FCU#1 FCU#1 FCU#1 FCU#1 FCU#1 FCU#1 FCU#1 FCU#1 FCU#1 FCU#1 FCU#1 FCU#1 FCU#1 FCU#1 FCU#1 BE REMOVED & SET ASIDE FOR RE-USE.
FCU TO BE REMOVED & SET ASIDE FOR
FCU TO BE REMOVED
FCU#1 FCU#1 FCU#1 RE-USE (TYPICAL)
SET ASIDE FOR RE-USE VD VD
ENTRANCE
TOILET
TYPICAL) (NIC) VD VD VD VD VD VD VD VD VD VD VD VD
(NIC) VD VD VD VD VD VD VD VD VD VD VD VD VD
SOLE
SUPPLY AIR GRILLE TO BE REMOVED
SUPPLY AIR GRILLE ELEC. SET ASIDE FOR RE-USE (TYPICAL)
TO BE REMOVED ROOM
(TYPICAL)
DRAWING CERTIFIED
THE
DATE: 8 / 27 / 2019
+ 2900
- CSTSD REF. NO. CB-0004
ARE
N
HEREI
0 1.0 2.0 3.0 4.0 5.0 10.0 12.0
METERS
NED
1 : 125M
SCALE:
1 EXISTING HVAC LAYOUT
CONTAI
RA-004351
SCALE 1 :125M
SH 001
REVISION VALIDATION
ON
19U094-094
NFORMATI
ZMA AAB EDB FSM

08/27/19 08/27/19 08/27/19 08/27/19

MSA STORAGE
I
NIC ROOM
THE
JOB ORDER/EWO NO.
GUARD QTBE-01 19U094 (CSTSD REF.# CB-0004)
HOUSE
AND
DRAWING TYPE
EXISTING HVAC LAYOUT HVA
NG
DRAWI
NIC
NIC
SCECO
ROOM GATE
S
THI
dd%mm%yy
088 K RA-004351 001 00

SAUDIARAMCO.
NOTES:
N
'
5
°1
7
11
MAKKAH
FOR ENLARGE HVAC LAYOUT 3
OF
ABLUTION RA-004351
REFER TO DRAWING NO
SH 003
EXISTING FCU (TYPICAL)
CONSENT
FA FA FA
FA FA FA FA FA
TTEN
FCU#2 FCU#3 FCU#3 FCU#3 FCU#3 FCU#3
1 FOR ENLARGE HVAC LAYOUT
WRI
FCU#1 FCU#1
FCU#3
RA-004351 MULTI-PURPOSE HALL
REFER TO DRAWING NO FA
SH 003
THE
TOILET
THOUT
FCU#1 FCU#1 FCU#1 FCU#1 FCU#1 FCU#1
(NIC)
FCU#2
WI NG
FA FA FA FA FA FA FA
DRAWI
C O R R I D O R (NIC)
SDMH
S
THI
2 FOR ENLARGE HVAC LAYOUT STAGE
RA-004351
REFER TO DRAWING NO
SH 003
FROMNED
OBTAI
BE
M
M
Y
PART,SHALL
O
O
A
A
O
O
W
W
REFERENCE DRAWINGS
R
R
C)
C)
C)
N
I
NI
NI
NI
K
FULL,OR
S
S
(
(
L
L
S
S
COVERED COURTYARD COVERED COURTYARD
A
N
A
I ON
W
REPRODUCTI
L
L
LEGEND
C
C
(NIC) HATCHED DENOTES NOT IN CONTRACT
FAN COIL UNIT

FCU (RE INSTALLED/RE-USED)
SAUDIARAMCO.NO
EXISTING DUCT WORKS
TO BE RE-INSTALL/RE-USED
NEW DUCTWORKS
FA FA FA FA FA FA FA FA FA FA FA FA FA FA FA FA FA FA
OF
PROPERTY
VD VD VD VD VD VD VD VD VD VD VD VD VD VD
FCU#1 FCU#1 FCU#1 FCU#1 FCU#1 FCU#1 FCU#1 FCU#1 FCU#1 FCU#1 FCU#1 FCU#1 FCU#1 FCU#1 FCU#1
FCU#1 FCU#1 FCU#1
VD VD
ENTRANCE
TOILET
VD VD VD VD VD VD VD VD VD VD VD VD VD VD VD VD
(NIC) VD VD VD VD VD VD VD VD VD VD VD VD
(NIC)
SOLE
ELEC. DRAWING CERTIFIED
ROOM
DATE: 8 / 27 / 2019
THE
ARE
4
N
FOR ENLARGE HVAC LAYOUT
HEREI
RA-004351 0 1.0 2.0 3.0 4.0 5.0 10.0 12.0
REFER TO DRAWING NO
SH 003
METERS
NED
1 : 125M
SCALE:
1 PROPOSED HVAC LAYOUT
CONTAI
RA-004351
SCALE 1 :125M
SH 002
REVISION VALIDATION
ON
19U094-094
NFORMATI
ZMA AAB EDB FSM

08/27/19 08/27/19 08/27/19 08/27/19

MSA STORAGE
I
ROOM
THE
JOB ORDER/EWO NO.
GUARD QTBE-01 19U094 (CSTSD REF.# CB-0004)
HOUSE
AND
DRAWING TYPE
PROPOSED HVAC LAYOUT HVA
NG
DRAWI
NIC
SCECO
ROOM GATE
S
THI
dd%mm%yy
088 K RA-004351 002 00

SAUDIARAMCO.
NOTES:

OF
CONSENT
FA FA
FA
TTEN
WRI
375x375 SCD 4-WAY 375x375 SCD 4-WAY
@ 333.3 CFM (TYP. TO 3) @ 333.3 CFM (TYP. TO 3)
FCU#2 VD VD
THE
FLEXIBLE CANVASS 600x600 RAG
MACHINE CONNECTION FCU#1 FCU#1
THOUT
400x250 SAD 400x250 SAD
600x600 RAG
FLEXIBLE CANVASS
MACHINE CONNECTION
WI
700x250 SAD
900x250 SAD VD VD
750x300 SAD
NG
400x250 SAD 550x300 SAD
DRAWI
VD
400x250 400x250
SAD SAD
700x250 SAD VD VD
400x250 SAD
S
THI
550x300 SAD
VD VD
FROM
VD 750x300 SAD
400x250 SAD
VD VD
NED
900x250 SAD
VD VD VD 400x250 SAD
FLEXIBLE CANVASS
OBTAI
MACHINE CONNECTION
FCU#1 FLEXIBLE CANVASS
MACHINE CONNECTION
375x375 SCD 4-WAY

@ 333.3 CFM
BE
FCU#2 600x600 RAG
(TYP. TO 3)
600x600 RAG
PART,SHALL
375x375 SCD 4-WAY
@ 366.7 CFM (TYP. TO 3)
FA FA
REFERENCE DRAWINGS
N
I
1 ENLARGE HVAC LAYOUT 2 ENLARGE HVAC LAYOUT 3 ENLARGE HVAC LAYOUT
FULL,OR
RA-004351 RA-004351 RA-004351
SCALE 1 :50M SCALE 1 :50M SCALE 1 :50M
SH 003 SH 003 SH 003
N
I ON
REPRODUCTI
LEGEND
SAD SUPPLY AIR DUCT
SCD SUPPLY CEILING DIFFUSER
SAUDIARAMCO.NO
RAG RETURN AIR GRILLE
VD VOLUME DAMPER
FA FA FA
OF
PROPERTY
600x600 RAG
FLEXIBLE CANVASS FCU#1 FCU#1 FCU#1

MACHINE CONNECTION
DRAWING CERTIFIED
SOLE
DATE: 8 / 27 / 2019
VD VD VD CSTSD REF. NO. CB-0004
THE
750x300 SAD
ARE
550x300 SAD
VD VD VD
N
HEREI
400x250 SAD VD VD VD
0 1.0 2.0 3.0 4.0 5.0
400x250
METERS
SAD
NED
1 : 50M
SCALE:
CONTAI
375x375 SCD 4-WAY
@ 333.3 CFM (TYP. TO 3)
REVISION VALIDATION
ON
19U094-094
NFORMATI
ZMA AAB EDB FSM

08/27/19 08/27/19 08/27/19 08/27/19
I
THE
JOB ORDER/EWO NO.
AND
4 ENLARGE HVAC LAYOUT DRAWING TYPE
RA-004351
SCALE 1 :50M
PROPOSED ENLARGED HVAC LAYOUT HVA
NG
SH 003
DRAWI
QATIF SAUDI ARABIA
S
THI
QTBE-01
dd%mm%yy
088 K RA-004351 003 00

SAUDIARAMCO.
NOTES:
OF
CONSENT
TTEN
WRI
38 20
50
THE
THOUT
RE-USED EXT'G.
600
HANGER RODS
WI
EXISTING FLEXIBLE CANVASS 100
RE-USED EXT'G. MACHINE CONNECTION EXT'G. CONC. BEAM
HANGER RODS
NG
EXISTING PLENUM
DRAWI
BOX
S
THI
200x200
350
VD
(RE-INSTALLED FCU2)
600
FROM
TIE-IN
NED
OBTAI
EXT'G. HIGH WINDOW
BE
NEW DUCTWORKS RE- INSTALLED FCU EXSITING PLENUM BOX NEW DUCT EXIST'G DUCT
PART,SHALL
WORKS WORKS
NEW 1"{ CONDENSATE LINE

NEW 25MM WIRE MESH
TIE-IN TO EXISTING DRAIN LINE
REFERENCE DRAWINGS
N
I
FULL,OR
N
RA-004351
I
SCALE 1 :10M
SH 004
ON
REPRODUCTI
SAUDIARAMCO.NO
OF
BONDING JUMPER
DAMPER REGULATOR SET
6 AWG COPPER FLEXIBLE CONNECTION
PROPERTY
INSULATED GREEN
AIR DUCT
SHAFT EXTENSION
152.4 WIDE GALVANIZED G.I. BAND

STEEL I BEAM MAX. WIDTH
STEEL CORNER BEAD
OF DUCT OR
STEEL ANGLE DRAWING CERTIFIED
SIZE
SOLE
DUCT
FAN IN MM.
FIBERGLASS INSULATION
DATE: 8 / 27 / 2019
0 - 1060 25x25x3 (1"x1"x„")
WITH FIRE RESISTANT
VAPOR BARRIER DUCT 1061 - 2420 40x40x5 (1•"x1•"x‰")
THE
INSULATION
STICK PINS OVER - 2420 50x50x6 (2"x2"x‚")

GLASS FABRIC 10 DIA. BAR
UNIT HOUSING
ARE
TAPE
NO. 8x16 mm. OPPOSED BLADE
L BAR METAL SCREW
N
VOLUME CONTROL
HEREI
@ 150 O.C. (MAX.) DAMPER
NON-FLAMMABLE METAL SHEET METAL STEEL ANGLE

150 W 150
SEALER OVER ALL JOINTS "U" STRIP
AND MECHANICAL CLIP
NED
AIR DUCT
PERFORATION SCALE:
CONTAI
NON-FLAMMABLE
ADHESIVE MASTIC
REVISION VALIDATION
NOTE:
DUCT HANGER / SUPPORT SCHEDULE
CHANNEL FRAME THIS REVISION NO. 00 IS COVERED, FOR ALL APPROVAL AND CERTIFICATION
DUCT WIDTH HANGER SUPPORT SPACING L BAR SIZE REQUIREMENTS, PER SAEP-334, UNDER DRAWING COMPLETION CERTIFICATE NO:
1. FOR EXTERIOR DUCT, THICKNESS OF
NOTES:
ON
INSULATION IS 100mm W/ WEATHER PROOFED ABOVE 800 2000 50 x 50 x6 19U094-094
ALUMINUM SHEET CLADDING ALL AROUND
NFORMATI
6{ BOLT & NUT 1. MULTI-BLADE DAMPERS SHALL BE USED FOR
400 - 800 40 x 40 x6 3mm NEOPRENE DESIGN CERTIFICATION REVIEW FOR KEY DRAWINGS OTHER
2. FOR INTERIOR DUCT THICKNESS OF INSULATION IS 50mm 1500 DUCT WIDTH LARGER THAN 300 (12"). (DESIGN AGENCY) x REQUIRED (SAUDI ARAMCO)
RUBBER FLEXIBLE WITH WASHER @
40 x 40 x 5 CONNECTION 150mm O.C. (MAX.) ENGG./DATE CERTIFIED BY/DATE CONST. AGENCY/DATE OPERATIONS/DATE BY/DATE
BELOW 400 1200 ZMA AAB EDB FSM
2. FRAME NET AREA SHALL BE EQUAL TO 08/27/19 08/27/19 08/27/19 08/27/19
DUCT CROSS-SECTIONAL AREA. REV.NO. DATE REVISION DESCRIPTION
I
THE
JOB ORDER/EWO NO.
2 DUCT INSULATION DETAIL 3 RECTANGULAR DUCT HANGER DETAIL 4 FLEXIBLE CANVASS CONNECTION DETAIL 5 VOLUME DAMPER MOUNTING DETAIL
AND
RA-004351 RA-004351 RA-004351 RA-004351
SCALE NTS SCALE NTS SCALE NTS SCALE NTS
SH 004 SH 004 SH 004 SH 004 DRAWING TYPE
HVAC SECTION & DETAILS HVA
NG
DRAWI
QATIF SAUDI ARABIA
S
THI
QTBE-01
dd%mm%yy
088 K RA-004351 004 00

Aramco Project Drawings New

Uploaded by

Copyright:

Available Formats

Aramco Project Drawings New

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Aramco Project Drawings New

Uploaded by

Copyright:

Available Formats

%filename%filename%filename%filename%filename%filename%filename% xxxname

3. ALL EXISTING EXPOSED RIGID STEEL ELECTRICAL CONDUITS,

PRODUCT: HILTI HAS M12 C/W HIT-HY 200.

HILTI SAFE SET PACKAGE

INSTALLATION CONDITION: DRY

PRODUCT: CANAM P-3615 OR P-3606 OR EQUALLY APPROVED,

ENLARGED PARTIAL PLAN/SEC/DET HA-001007 SHT.003

ENLARGED PARTIAL PLAN/SEC/DET HA-001007 SHT.004

FCU-1 ENLARGED PLAN/SECT/DET HA-001007 SHT.005

FCU-2 ENLARGED PLAN/SECT/DET HA-001007 SHT.006

STAGE/CORRIDOR/FRAMING/DET HA-001007 SHT.007

THIS REVISION NO. 00 IS COVERED, FOR ALL APPROVAL AND CERTIFICATION

ENGG./DATE CERTIFIED BY/DATE CONST. AGENCY/DATE OPERATIONS/DATE BY/DATE

SAUDI ARABIAN OIL COMPANY

AL-KHOBAR SAUDI ARABIA

RESTRICTED VECTOR CADD-01

ABLUTION AREA - RE-INSTALLED LIGHTING FIXTURES

CLASS ROOM CLASS ROOM

FCU-1 ENLARGED PLAN/SECT/DET HA-001007 SHT.005

FCU-2 ENLARGED PLAN/SECT/DET HA-001007 SHT.006

STAGE/CORRIDOR/FRAMING/DET HA-001007 SHT.007

THIS REVISION NO. 00 IS COVERED, FOR ALL APPROVAL AND CERTIFICATION

REQUIREMENTS, PER SAEP-334, UNDER DRAWING COMPLETION CERTIFICATE NO:

ENGG./DATE CERTIFIED BY/DATE CONST. AGENCY/DATE OPERATIONS/DATE BY/DATE

ZMA AAB EDB FSM

REV.NO. DATE REVISION DESCRIPTION

CONSTRUCTION UNTIL CERTIFIED AND DATED

2 SH 004 SH 004 NEW SUSPENDED ACOUSTIC TILES (S.A.T.)

SCHOOLS GIRL'S INTERMEDIATE

1 PROPOSED REFLECTED CEILING PLAN AL-KHOBAR SAUDI ARABIA

RESTRICTED VECTOR CADD-01

2. OTHER NOTES SEE DRAWING NO. HA-001007, SHEET 001.

200 +2900 200

M12, C/W HIT-HY 200 TYP.

EXT'G. CONC. BEAM

FCU-1 ENLARGED PLAN/SECT/DET HA-001007 SHT.005

FCU-2 ENLARGED PLAN/SECT/DET HA-001007 SHT.006

FCU-1 LIGHTING FIXTURES, TYP.

C/W HIT-HY 200 W/ EMBEDED

CONT. ANGLE BAR LEDGER

FIXED W/ 2-M12 HILTI

ENLARGED PARTIAL PLAN/SEC/DET SDT

RESTRICTED VECTOR CADD-01

2. OTHER NOTES SEE DRAWING NO. HA-001007, SHEET 001.

NEW L100X100X10mm THK.

FCU-2 NEW GA.20X38MM

NEW L100X100X10MM THK. FCU-1 ENLARGED PLAN/SECT/DET HA-001007 SHT.005

200 + 2900 200

ZMA AAB EDB FSM

P-3606 OR P-3615 OR REV.NO. DATE REVISION DESCRIPTION

APPROVED SELF DRILLING 19U094 CONSTRUCTION UNTIL CERTIFIED AND DATED

RESTRICTED VECTOR CADD-01

2. OTHER NOTES SEE DRAWING NO. HA-001007, SHEET 001.

3. FOR FCU LOCATION AND DUCT LAYOUTREFER TO HVAC DRAWINGS.

FCU-2 ENLARGED PLAN/SECT/DET HA-001007 SHT.006

STAGE/CORRIDOR/FRAMING/DET HA-001007 SHT.007

NEW L30X30X5MM THK.

REQUIREMENTS, PER SAEP-334, UNDER DRAWING COMPLETION CERTIFICATE NO:

ENGG./DATE CERTIFIED BY/DATE CONST. AGENCY/DATE OPERATIONS/DATE BY/DATE

ZMA AAB EDB FSM