WATSON-MARLOW BREDEL

Features
✓ Can run dry indefinitely ✓ Suitable for high viscosities ✓ Patented direct coupled
spx25
without damage (no product and densities design with rotor supporting
in line) integrated into the pump
✓ No metal to metal contact
head and unique buffer zone
✓ Highly suitable for handling ✓ 100% positive flow (no slip) to provide protective barrier
abrasive, shear sensitive, vis- between pump head and
cous, high density products ✓ Low noise level drive arrangement
and corrosive liquids
✓ Safe use for explosive ✓ Ultra compact footprint with
✓ Smooth liquid passage environments flanged helical gearing; no
without valves, dead corners coupling or drive alignment
✓ Designed to pump liquids
or glands required
containing particles
✓ 100% positive flow (no slip) (abrasion is no restriction)
✓ Accurate (+/- 1%) dosing ✓ Permanent lubrication and
(metering) capabilities cooling of pump element
with specially compounded
✓ Product pumped does not food grade lubricant
contact mechanical parts or
seals ✓ Self priming to 95% vacuum
(5 kPa.a)
✓ Only wearing part is
the hose ✓ Two year comprehensive SPX Hose Pumps
warranty Improve your process performance
✓ Easy maintenance low cost,
short downtime. Replace-
ment of hose without
dismantling pump
✓ Heavy duty bearings,
greased for life
✓ Easily and completely
cleanable
✓ Reversible rotation

The perfect pump for the perfect application

 Required
motor power
[kW] 1.5
SPX25 a a Product

a
kP

a
kP

kP
kP
0 temperature
50 50

00
00
• Maximum flow: 7

10
(°C)

16
1.25
2,740 L/h

• Capacity:
0.300 L/rev 1.0 40
• Maximum discharge pressure:
5 4
50
1,600 kPa [16 bar] 0.75
60
• Inner diameter pump element: 2
Ø 25 mm 3
0.5 70
• Lubricant required:
2 litres
80

• Minimum starting torque:

115 Nm 1 6 100 kPa = 1 bar

Pump speed [rpm] 20 40 60 80 100 120 140 160

Capacity [L/h] 360 720 1080 1440 1800 2160 2520 2880

Continuous Duty Intermittent Duty Maximum 2 hours operation followed by minimum 1 hour stop

HOW TO USE THE CURVES

1. Flow required indicates pump speed
2. Calculated discharge pressure
3. Net motor power required
4. Product temperature
5. Calculated discharge pressure
6. Maximum recommended pump speed

Note: The area of continuous operation diminishes with increased product temperatures.
For product temperatures > 40 ºC, the area of continuous operation reduces to the corresponding red temperature line.

C L1 L2
4x øQ
ON BC.R
D
H

H2
H1

4x øP
E

F J K M O

G N

A L

H2 L L2 P
Type A B C D E F G H H1 max J K max L1 max M N O Q R

SPX25 521 304 2.5 264 98 279 315 460 222 424 66 97 592 58 468 305 120 15 Ø12 Ø14 85
All dimensions in [mm]
 TECHNICAL SPECIFICATIONS
Supply: 230/400V - 3 phases - 50 Hz
Operating Speeds:
Minimum starting torque: 115 Nm
Product temperature Range*: -10 °C up to 80 °C
Ambient Temperature Range**: -20 °C up to 45 °C
Hose Lubricant Required: 2 litres
Flow Range: up to 2,740 L/hr
Discharge Pressure: up to 1,600 kPa [16 bar]
Suction Pressure: 9.5 metres lift to 5 kPa [0,05 bar]
Available Hose Materials: NR, NBR, EPDM, CSM (Hypalon®)
Available flanges: ASA, DIN AISI 316, DIN AISI 316
Available inserts: AISI 316, PVC, PP, PVDF
Optional High Level Hose Leak Sensor: NO or NC: 1A max, 250V max, 50 VA max

MATERIALS OF CONSTRUCTION 7
SPX25

Pumphousing: Cast-iron 1600

kPa
6 - 16
Rotor: Cast-iron 1250
bar -
232
kPa - psi
Pressing shoes: Aluminium 5 12.5

Number of shims
1000 bar -
181 p
Cover: Cast-iron 4
kPa -
10 ba si
r - 14
Brackets: Mild steel, galvanized 750 k
Pa - 7
5 psi
3 .5 bar
Support Frame: Mild steel, galvanized 500 kP
- 109
psi
a - 5 bar
Mounting material: Mild steel, galvanized 2
si
- 72.5 p
Hose Clamps: AISI 316 250 kPa
1 - 2.5 ba
0 kPa - r - 36 ps
i
Shaft: Alloy Steel 0 bar
0
Seals: Neoprene or Nitrile 0 20 40 60 80 100 120 140 160
Pumphead Weight: 39 kg Pump speed [rpm]

SHIMS SPECIFICATIONS.
When the temperatures are above 60 °C always
use one shim less than indicated in the diagrams.
Always round up the number of shims.
* Please consult your Bredel representative for lower or higher temperature operation.
** Allowable ambient temperature is based on pump capabilities and may be further limited by
gearbox ambient capabilities.

www.bredel.com
Sluisstraat 7 - P.O. Box 47 - NL-7490 AA Delden - The Netherlands
Tel.: +31 74 3770000 - Fax: +31 74 3761175 - Email: hosepumps@wmpg.com
12072010-SPX25

The information contained in this document is believed to be correct at the time of publication, but Watson-Marlow Bredel accepts no liability for
any error it contains, and reserves the right to alter specifications without prior notice. All mentioned values in this document are values under
controlled circumstances at our test bed. Actual flow rates achieved may vary because of changes in temperature, vis­cosity, inlet and discharge Nonfood Compounds
Program Listed (H1)

pressures and/or system configuration. SPX, DuCoNite®, Bioprene® and Bredel are registered trademarks. (Registration 123204)

NEN-EN-ISO
9001:2000
 BREDEL TECHNICAL SPECIFICATION
Description: Code: Rev.
High Level Lubricant Switch TS05-011 A
Created by: AB Date: 04-10-05 Reference:
Checked by: DS Date: 04-10-05

Type Order code Floater info (A230 002)

SPX10 / SPX15 Composition:
29 107 610

Single floater :
A230 002

Fitted on pump:
XXX 999N

SP10 – SP50 Composition:

SPX25 – SPX65 29 104 610

Single floater :
A230 002

Fitted on pump: Knob

XXX 999N upwards for
normally
closed
operation

Barksdale
SP65 Composition: Type :
SP25 - SP50 vacuüm 29 106 610 UNS-VA/G1/8-K2-PP19/1(2)-EXI
SPX25 SPX65 vacuüm
Single floater : ATEX
A230 002 II 1 GD EEx ia II B T6
0
IP65 T100 C
Fitted on pump:
XXX 999N Tamb : -400C …+750C
Ui = 28V
Ii = 50mA
Ci = 40pF
Li = 4 µH

Material :
SP80 / SP100 Composition: Stem/nut: Stainless Steel
SPX80 / SPX100 29 124 610 Float: PP
Cable: PVC/ 2x0.34 mm2/ L = 2m.
Single floater :
A230 002 Connection diagram :

Fitted on pump:
XXX 999N

EXCEPTION:
Only if the switch is used in a non-ATEX zone you may
use the following Max. Contact Rating:
230V AC/DC, 2 A, 40VA/W

*Remark : dimensions in mm.