Fairfield Institute of Management and Technology

Computer Application Lab Practical

Subject Name: Computer Application

Subject Code: 111

Submitted to: Submitted by:

Mr. Prashant Vats Name: Vineet Gola
Enrollment no: IPU037826
Course: BBA(GENERAL)
Semester/Section: 1
 Table Of Content
Practical No. Content Page No.
Lab practical 1 To create Resume in
MS Word
3-5
Lab practical 2 To create Notice in MS
Word
6
Lab practical 3 To write Formal Letter
in MS Word
7-8
Lab practical 4 To write Event Report
in MS Word
9-10
Lab practical 5 To write Memo in MS
Word
11
Lab practical 6 To create Presentation
On MS Word
12-14
Lab practical 7 To Use Mail-merge in
MS Word
15-27
Lab practical 8 To Insert Header &
Footer in MS Word
28-35
Lab practical 9 To create a Table
within Excel
36-38
Lab practical 10 To Create a Table
showing Student Result
39-41
Lab practical 11 To Use Filter Function
in Table
42-44
Lab practical 12 To Use Chart Function
in Table
45-47
 Lab Practical 1.

To create a simple Resume in MS word.

1. Open the Document in MS word as follows.

2. Go on to the Start-> Click on Windows Start up-> Click on MS word.
3. Click on Save As to save the Document after typing the file name.

.
4. Save the Document onto Desired location in the Computer after specifying its name. Click onto
Save.
 5. Create the Resume as follows.

RESUME

VINEET GOLA CELL: 8586808050

EMAIL: 25vkumar146@gmail.com

CAREER OBJECTIVE : Seeking for opportunities and secure a position to

contribute my skills effectively for the growth of the organization and my

professional career. Strong understanding of principles of business administration
and their practical usage.

EDUCATIONAL QUALIFICATIONS:

 CLASS X under Central Board Of Secondary Education(CBSE) from

Aaryan International School, New Delhi – 2018
 CLASS XII under Central Board Of Secondary Education(CBSE) from
Aaryan International School, New Delhi – 2020
 Pursuing Bachelors of Business Administration (BBA) from Indraprasthsa
University

STRENGTH

 Good Communication
 Ready to take responsibility
 Quick learner and good interpersonal skillls
 Lab Practical 2.

To create a Notice in the MS word.

1. Open the Document in MS word as follows.

2. Go on to the Start-> Click on Windows Start up-> Click on MS word.

3. Draw a Notice as follows.

 Lab Practical 3.

To write a Formal letter using MS word.

1. Open the Document in MS word as follows.

2. Go on to the Start-> Click on Windows Start up-> Click on MS word.

3. Type the letter as follows.

 Lab Practical 4.

To write an Event Report using MS word.

1. Open the Document in MS word as follows.

2. Go on to the Start-> Click on Windows Start up-> Click on MS word.

3. Type the Event report as follows.

 Lab Practical 5.
To write a MEMO using MS word.

1. Open the Document in MS word as follows.

2. Go on to the Start-> Click on Windows Start up-> Click on MS word.

3. Type the MEMO in Word as follows.

 Lab Practical 6.
To create a MS PowerPoint Slide presentation.

1. Open the PowerPoint Document.

2. Go to Start-> Select MS Office-> Select PowerPoint->

3. Start by opening a "Blank presentation" in PowerPoint.

4. Select the "Title Slide" option.
5. Type in your title and subtitle.

6. Select a background for the entire presentation.

 7. Add new slides.

8. Set the transitions for your slides. ...

9. Add some more to your presentation with animation.
 Lab Practical 7

To Use Mail Merge in Microsoft Word

Mail Merge is most often used to print or email form letters to multiple recipients. Using Mail

Merge, you can easily customize form letters for individual recipients. Mail merge is also used to
create envelopes or labels in bulk.

This feature works the same in all modern versions of Microsoft Word: 2010, 2013, and 2016.

3. In a blank Microsoft Word document, click on the Mailings tab, and in the Start Mail
Merge group, click Start Mail Merge.

4. Click Step-by-Step Mail Merge Wizard.

5. Select your document type. In this demo we will select Letters. Click Next: Starting
document.
6. Select the starting document. In this demo we will use the current (blank) document.
Select Use the current document and then click Next: Select recipients.

1. Note that selecting Start from existing document (which we are not doing in this
demo) changes the view and gives you the option to choose your document. After
you choose it, the Mail Merge Wizard reverts to Use the current document.

7. Select recipients. In this demo we will create a new list, so select Type a new list and then
click Create.
1. Create a list by adding data in the New Address List dialog box and clicking OK.
2. Save the list.

Note that now that a list has been created, the Mail Merge Wizard reverts to Use an
existing list and you have the option to edit the recipient list.
3. Selecting Edit recipient list opens up the Mail Merge Recipients dialog box, where
you can edit the list and select or unselect records. Click OK to accept the list as is.
 4. Click Next: Write your letter.

8. Write the letter and add custom fields.

1. Click Address block to add the recipients' addresses at the top of the document.
2. In the Insert Address Block dialog box, check or uncheck boxes and select options
on the left until the address appears the way you want it to.

3. Note that you can use Match Fields to correct any problems. Clicking Match
Fields opens up the Match Fields dialog box, in which you can associate the fields
from your list with the fields required by the wizard.
9. Press Enter on your keyboard and click Greeting line... to enter a greeting.

In the Insert Greeting Line dialog box, choose the greeting line format by clicking the drop-
 down arrows and selecting the options of your choice, and then click OK.

10. Note that the address block and greeting line are surrounded by chevrons (« »). Write a short
letter and click next: Preview your letters.
Preview your letter and click next: Complete the merge.
 Click Print to print your letters or Edit individual letters to further personalize some or
all of the letters.
 Lab Practical 8

To insert Header & Footer into MSWORD.

Introduction

You can make your document look professional and polished by utilizing the header and footer sections.
The header is a section of the document that appears in the top margin, while the footer is a section of
the document that appears in the bottom margin. Headers and footers generally contain information such
as the page number, date, and document name.
Headers and footers can help keep longer documents organized and make them easier to read. Text
entered in the header or footer will appear on each page of the document.

1. To insert a header or footer:

1. Select the Insert tab.

2. Click either the Header or Footer command. A drop-down menu will appear.
3. From the drop-down menu, select Blank to insert a blank header or footer, or choose one
of the built-in options.
 1. The Design tab will appear on the Ribbon, and the header or footer will appear in
the document.
2. Type the desired information into the header or footer.

3. When you're finished, click Close Header and Footer in the Design tab, or hit
the Esc key.

After you close the header or footer, it will still be visible, but it will be locked. To edit it again,
just double-click anywhere on the header or footer, and it will become unlocked.

To insert the date or time into a header or footer:

1. Double-click anywhere on the header or footer to unlock it. The Design tab will
appear.
2. From the Design tab, click the Date & Time command.
 3. Select a date format in the dialog box that appears.

4. Place a check mark in the Update Automatically box if you would like it to
always reflect the current date. Otherwise, it will not change when the document
is opened at a later date.
5. Click OK. The date and time now appears in the document.

To remove content controls:

By default, some of the built-in headers and footers have snippets of text that are called content
controls. Content controls can contain information such as the document title or company
name, and they allow you to enter this information into a form field.

However, you'll often just want to type a normal header without any content controls. To do this,
you'll need to remove any content control fields from the header or footer.
 1. With the header or footer section active, right-click the content control field you
want to remove. A drop-down menu will appear.
2. Click Remove Content Control. The content control field will disappear.

Other header and footer options

There are many other header and footer options you can use to design these sections of your
document. You can review the Header & Footer Tools Design tab to view and explore these
options.

Adding page numbers

Word can automatically label each page with a page number and place it in a header, footer,
or side margin. You can add page numbers to an existing header or footer, or you can insert
page numbers into a new header or footer.
To add page numbers to an existing header or footer:
1. Select the header or footer. The Design tab will appear.
2. Place the insertion point where you want the page number to be. You can place
it anywhere except inside a content control field.

3. From the Design tab, select the Page Number command.

4. Click Current Position, and then select the desired style. The page number will
appear in the document.

If you've already typed information into your header or footer, it's important to place the page
number at the Current Position to avoid losing anything. If you select a page number from Top
of Page or Bottom of Page, it will delete anything you've already added to the header or
footer.

To insert page numbers into a new header or footer:

1. From the Insert tab, click Page Number. A drop-down menu will appear.
 2. Select the desired page number style, and it will appear in your document.

To hide the page number on the first page:

In some documents, you may not want the first page to show the page number. You can hide the
first page number without affecting the rest of the pages.

1. Select the header or footer that contains the page number.

2. From the Design tab, place a check mark next to Different First Page. The
header and footer will disappear from the first page. If you want, you can type
something new in the header or footer, and it will only affect the first page.
If you're unable to select Different First Page, it may be because an object within the header or footer is
selected. Click in an empty area within the header or footer to make sure nothing is selected.
To format page numbers:
1. Select the header or footer that contains the page number.
2. From the Design tab, select the Page Number command.
3. Click Format Page Numbers.

1. From the dialog box, select the desired Number format.

2. Next to Start at, enter the number you want the page numbers to
start with.
 Lab Practical 9
Creating a Table within Excel

1. Open the Excel spreadsheet.

2. Use your mouse to select the cells that contain the information for the table.
3. Click the "Insert" tab > Locate the "Tables" group.
4. Click "Table". A "Create Table" dialog box will open.
5. If you have column headings, check the box "My table has headers".

6. Verify that the range is correct > Click [OK].

7. Resize your columns to make the headings visible.
 Lab Practical 10

To create table showing the Students Result in MS Excel

1. Open the Excel spreadsheet.

2. Create the table as follows:

3. Calculate the Sum as =SUM(A2:G2)

4. Calculate Average of the Subjects as
=AVERAGE (C2:F2)
 Lab Practical 11

To use a filter Function in a table showing the Students Result in MS Excel

1. Open the Excel spreadsheet.

 2. Create the table as follows:

3. Go onto Data-> Select Filter

The Table will appear in the following format.

4. If you want to filter by Name then
5. The resultant table will appear as follows
 Lab Practical 12

To use a Chart Function in a table showing the Students Result in MS Excel

1. Open the Excel spreadsheet.

3. Create the table as follows:

4. Choose the following Chart function

5. As per Column Function

6. As per Line Pie Chart Function

7. As per pie Chart Function

8. As per Bar function