Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 38 views

    Gen Set Control Unit: AMF Generator Set Controller

    Uploaded by

    Mohammad Ebrahimi
    The document introduces the GC310, a new automatic generator set controller from SICES. The GC310 has basic features for common generator applications, including three-phase AMF control and true RMS voltage and current measurements. It is designed to interface with current generation engines using the J1939 CAN protocol but can also be used with standard engines. The GC310 provides graphic display, programmable inputs/outputs, and communication interfaces for remote monitoring and control.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Gen Set Control Unit: AMF Generator Set Controller

    Uploaded by

    Mohammad Ebrahimi
    38 views2 pages
    The document introduces the GC310, a new automatic generator set controller from SICES. The GC310 has basic features for common generator applications, including three-phase AMF control and true RMS voltage and current measurements. It is designed to interface with current generation engines using the J1939 CAN protocol but can also be used with standard engines. The GC310 provides graphic display, programmable inputs/outputs, and communication interfaces for remote monitoring and control.

    Original Title

    3173688-201106270640270

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document introduces the GC310, a new automatic generator set controller from SICES. The GC310 has basic features for common generator applications, including three-phase AMF control and true RMS voltage and current measurements. It is designed to interface with current generation engines using the J1939 CAN protocol but can also be used with standard engines. The GC310 provides graphic display, programmable inputs/outputs, and communication interfaces for remote monitoring and control.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    38 views2 pages

    Gen Set Control Unit: AMF Generator Set Controller

    Uploaded by

    Mohammad Ebrahimi
    The document introduces the GC310, a new automatic generator set controller from SICES. The GC310 has basic features for common generator applications, including three-phase AMF control and true RMS voltage and current measurements. It is designed to interface with current generation engines using the J1939 CAN protocol but can also be used with standard engines. The GC310 provides graphic display, programmable inputs/outputs, and communication interfaces for remote monitoring and control.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 2

    Gen set control unit NEW

     Three-phases AMF
    automatic genset
    controller
     True RMS readings
    on generator and
    GC310
    AMF generator set controller
    mains voltages and
    currents A new range of automatic generator set controller is introduced by SICES starting
     Additional current from the GC310 model.
    measurement for
    This basic model has all required features for the most common generator
    neutral or
    applications (Single Prime Mover and Single Stand-by).
    differential
    protection
     Active, Reactive and
    apparent power
    measurement
     Frequency and
    power measurement
    on Mains input
     Graphic display
     8+3 fully
    programmable
    digital input
     Up to 8 digital output
    (6 programmable)
     RS232 interface port
    with MODBUS RTU
    protocol
     J1939 and MTU
    MDEC CAN interface
     Real Time Clock
     Events and data
    logging
     Engine speed It is designed for the current generation of engines that have CAN interface (mostly
    J1939 protocol) but, nevertheless, it can be used with standard engines since
    measurement by
    engine measurements can be carried out by the embedded analogue interfaces.
    pick-up or W
     GSM and PSTN The graphic display allows to implement an optimize human interface showing a
    modem great number of measures and data.
    management
    As all SICES controls, an huge set of parameters allows to easily adapt the
     SMS communication controller to specific and not standard applications. The Parameters are easily
     ETHERNET interface managed by a free software tool (BoardPrg) but they can be manually
    programmed from the front panel as well.

    GC310 is able to measure the MAINS frequency and compute power and energy
    even when the load is connected to the MAINS.

    Via Molinello 8/B 21040 Jerago (VA) Events and DTC logs can be accessed from the front panel and read on the display.
    Italy
    Tel +39 0331 212941 GC310 is projected to connect different devices for local or remote control, i.e.
    Fax +39 0331 216102 Modem GSM, Gateway module for Ethernet interface, Analogic modem, ….
    www.sices.eu Moreover, thanks to its support of standard protocol, it can be easily interfaced to
    E-mail: info@sices.eu
    any proprietary supervision system.
    Rev. 1
    Technical characteristics
    Measures Inputs, outputs and aux. functions
    Mains Voltages 8 Programmable digital inputs
    L1-L2, L2-L3, L3-L1 3 Analogue inputs, if not used, can be used as not insulated digital
    Lx-N max. voltage < 300Vac cat. IV inputs
    Generator Voltages: 1 Relay (3A) fuel solenoid
    L1-L2, L2-L3, L3-L1, True RMS measure. 8 Digital outputs (6 programmable)
    Lx-N max. voltage < 300Vac cat. IV 2 SPDT (10A) relays for power changeover management
    Generator Currents:
    L1, L2, L3, N True RMS measure. Embedded functions
    Nominal max. current: 5Aac
    Engine diagnostic code
    Overload measurable current: 4x 5Aac (sinusoidal, max. 3 s)
    Periodical test.
    Generator and Mains Frequency meter:
    Real Time Clock
    Resolution = 0.1 Hz.
    Fuel pump management.
    Accuracy = ± 50ppm, ±35ppm/°C (typical)
    Pre-glow and coolant heater management
    Battery Voltmeter:
    Remote start and stop
    Resolution = 0.1V
    Maintenance working
    Oil Pressure Gauge:
    Embedded alarm horn.
    VDO 0-10 Bar, VDO 0-5 Bar, Veglia 0-8 Bar
    Engine speed measurement by pick-up or W
    Coolant Temperature sensors:
    VDO, Veglia, BERU
    Communication:
    Fuel Level:
    Serial port RS232 Modbus RTU
    VDO, Veglia, Generic max. 380 ohm
    Ethernet network by means additional electronic module
    Engine revolution counter:
    “Gateway Modbus TCP/RTU”
    By W. Programmable frequency/revolution ratio.
    GSM and PSTN modem management
    Same input can be used for pick-up signal.
    SMS communication with Modem GSM
    Supervision software for remote control available
    Other measures available by J1939 bus

    Computed Measures Other Technical data


    Active power meter Supply voltage: 7…32 Vdc
    Reactive power meter Power consumption: typical less than 2W (AUTO mode, STAND-
    Apparent power meter BY, AMF active, LCD Lamp Saving active).
    Power factor: Total and phase by phase Operating frequency 50Hz or 60Hz
    Active and reactive energy counter LCD: transflective with LED backlight.
    Hour counter Operating temperature: -25 °C to 70 °C
    Hour counter for maint./rental Protection degree: IP55
    Start Counter
    Weight: 830g
    Overall dimension: 247x187mm (LxH)
    Engine Protections Panel cutout: 218x159 (LxH)
    Overspeed Graphic display dimensions: 70 x 38mm - 128 x 64 pixel
    Coolant temperature by ON/OFF and by analogue (warning and
    block) Specific function for French market EJP / EJP-T
    Oil pressure by ON/OFF and by analogue (warning and block) EMC: conform to EN61326-1.
    Fuel level ON/OFF by ON/OFF and by analogue (warning and Safety: built in conformity to EN61010-1
    block)
    Belt break
    Maximum deliverable power SAMPLE CONNECTION DIAGRAM
    Overcrank and start failure.

    Generator Protections
    Underfrequency (81U)
    Overfrequency (81O)
    Undervoltage (27)
    Overvoltage (59)
    Power direction (32)
    Time dependent overcurrent (51)
    Instantaneous overcurrent (50)
    Phase sequence
    Current and Voltage unbalance
    Rated conditions failure
    Differential protection (51N)

    EAAD030000EN - REV. 1

    You might also like