Bosch Rexroth AG

Spare parts list Service Hydraulics

Glockeraustrasse 4

Material number: R902422155 89275 Elchingen

Germany
Drawing: R902420950
+49 (0)7308/82-2126
Designation: AXIAL-PISTON PUMP
PL A4VSG1000 HD1DT /30R-PPH10K079NES1317

Status of version: 05/2019 Date: 15.05.2019

Page: 1

Pos. Material number Designation Quantity

1 R902422156 AXIAL-PISTON PUMP 1 UNIT L

2 R910990617 FLANGE COVER 2 UNIT
3 R902602011 SEAL SCREW 1 UNIT
4 R902602207 SEAL SCREW 3 UNIT

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Rolf Najork (Vorsitzender / President), Dr. Markus Forschner; Dr. Steffen Haack; Dr. Bertram Hoffmann;
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Werner Struth
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902422155 89275 Elchingen

Germany
Drawing: R902420950
+49 (0)7308/82-2126
Designation: AXIAL-PISTON PUMP
PL A4VSG1000 HD1DT /30R-PPH10K079NES1317

Status of version: 05/2019 Date: 15.05.2019

Page: 2

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Rolf Najork (Vorsitzender / President), Dr. Markus Forschner; Dr. Steffen Haack; Dr. Bertram Hoffmann;
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Werner Struth
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902422156 89275 Elchingen

Germany
Drawing: R902420911
+49 (0)7308/82-2126
Designation: AXIAL-PISTON PUMP

Status of version: 05/2019 Date: 15.05.2019

Page: 3

Pos. Material number Designation Quantity

1 R902420908 BASE UNIT 1 UNIT L

2 CONTROL 1 UNIT L
3 R910984783 SPRING PACK 1 UNIT L
5 R910963731 VALVE MOUNTING KIT 1 UNIT
6 R910963732 VALVE MOUNTING KIT 1 UNIT
9 R910964071 AXIAL-PISTON PUMP 1 UNIT L
11 R910901155 INDUCTIVE POS.TRANSDUCER 1 UNIT L
12 R902537126 PROTECTIVE TUBE 1 UNIT L
61 R902805710 SHIPPING PROTECTION 2 UNIT
62 R902602207 SEAL SCREW 1 UNIT
64 R902602207 SEAL SCREW 1 UNIT
65 R902602207 SEAL SCREW 1 UNIT
71 R902557497 FLANGE COVER 1 UNIT L

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Rolf Najork (Vorsitzender / President), Dr. Markus Forschner; Dr. Steffen Haack; Dr. Bertram Hoffmann;
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Werner Struth
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902422156 89275 Elchingen

Germany
Drawing: R902420911
+49 (0)7308/82-2126
Designation: AXIAL-PISTON PUMP

Status of version: 05/2019 Date: 15.05.2019

Page: 4

Pos. Material number Designation Quantity

81 R902602011 SEAL SCREW 1 UNIT

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Rolf Najork (Vorsitzender / President), Dr. Markus Forschner; Dr. Steffen Haack; Dr. Bertram Hoffmann;
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Werner Struth
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902422156 89275 Elchingen

Germany
Drawing: R902420911
+49 (0)7308/82-2126
Designation: AXIAL-PISTON PUMP

Status of version: 05/2019 Date: 15.05.2019

Page: 5

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Rolf Najork (Vorsitzender / President), Dr. Markus Forschner; Dr. Steffen Haack; Dr. Bertram Hoffmann;
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Werner Struth
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902420908 89275 Elchingen

Germany
Drawing: R910984673
+49 (0)7308/82-2126
Designation: BASE UNIT

Status of version: 05/2019 Date: 15.05.2019

Page: 6

Pos. Material number Designation Quantity

1 R910984654 ROTARY GROUP 1 UNIT L

2 R910978485 PUMP HOUSING 1 UNIT
4 R910988557 CONNECTION PLATE 1 UNIT L
5 R902544276 INDICATING DEVICE 1 UNIT
6 R902544277 STUD BOLT 1 UNIT L
7 R902565758 SPLINED COUPLING 1 UNIT
10 R910119172 SOCKET HEAD CAP SCREW 8 UNIT
11 R910941726 SCREW PLUG 3 UNIT
12 R909153364 SCREW PLUG 2 UNIT
13 R909153815 SCREW PLUG 1 UNIT D
14 R910963411 O-RING 1 UNIT D
16 R910923831 R-RING 3 UNIT D
18 DOUBLE BREAK-OFF PLUG 1 UNIT

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Rolf Najork (Vorsitzender / President), Dr. Markus Forschner; Dr. Steffen Haack; Dr. Bertram Hoffmann;
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Werner Struth
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902420908 89275 Elchingen

Germany
Drawing: R910984673
+49 (0)7308/82-2126
Designation: BASE UNIT

Status of version: 05/2019 Date: 15.05.2019

Page: 7

Pos. Material number Designation Quantity

19 DOUBLE BREAK-OFF PLUG 1 UNIT D

20 R910984653 THROTTLE SCREW 1 UNIT
22 R910969260 THROTTLE SCREW 2 UNIT
25 R910979852 REFERENCE PLATE 1 UNIT
27 R910112291 O-RING 1 UNIT
28 R910105023 HEXAGON SCREW 2 UNIT
29 R910186767 WASHER 2 UNIT

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Rolf Najork (Vorsitzender / President), Dr. Markus Forschner; Dr. Steffen Haack; Dr. Bertram Hoffmann;
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Werner Struth
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902420908 89275 Elchingen

Germany
Drawing: R910984673
+49 (0)7308/82-2126
Designation: BASE UNIT

Status of version: 05/2019 Date: 15.05.2019

Page: 8

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Rolf Najork (Vorsitzender / President), Dr. Markus Forschner; Dr. Steffen Haack; Dr. Bertram Hoffmann;
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Werner Struth
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R910984654 89275 Elchingen

Germany
Drawing: R910984655
+49 (0)7308/82-2126
Designation: ROTARY GROUP

Status of version: 05/2019 Date: 15.05.2019

Page: 9

Pos. Material number Designation Quantity

1 R910971445 PISTON PAD 9 UNIT

3 R902424562 CYLINDER 1 UNIT
4 R910967278 DISTRIBUTOR PLATE 1 UNIT
5 R902512723 DRIVE SHAFT 1 UNIT
6 R910962993 SWASH PLATE 1 UNIT
7 R910963559 DRIVER PIVOT 1 UNIT
8 R910963560 SLIDER 1 UNIT
9 R910966999 RETAINING PLATE 1 UNIT
10 R910978387 RETAINING BALL 1 UNIT
11 R910963561 SPACER SEGMENT 4 UNIT
12 R910990391 SEGMENT 4 UNIT
13 R902453805 SEALING FLANGE 1 UNIT
14 R910962889 BEARING SHELL 2 UNIT

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Rolf Najork (Vorsitzender / President), Dr. Markus Forschner; Dr. Steffen Haack; Dr. Bertram Hoffmann;
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Werner Struth
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R910984654 89275 Elchingen

Germany
Drawing: R910984655
+49 (0)7308/82-2126
Designation: ROTARY GROUP

Status of version: 05/2019 Date: 15.05.2019

Page: 10

Pos. Material number Designation Quantity

15 R910983272 SLIDING DISC 1 UNIT

16 R910967285 SHIM RING 2 UNIT
17 R910967286 SHIM RING 2 UNIT
19 R910991530 SEAL BUSHING 1 UNIT
20 R910978488 FEED WHEEL 1 UNIT
22 R910969259 SETTING SCREW 2 UNIT
23 R910274267 SUPPORTING DISC 1 UNIT
25 R910965649 CYL. ROLLER BEARING 1 UNIT
26 R910967830 CYL. ROLLER BEARING 1 UNIT
28 R910967284 COMPRESSION SPRING 25 UNIT
29 R910996096 SUPPORTING DISC 1 UNIT
30 R902400702 SHAFT SEALING RING 1 UNIT
31 R910640182 O-RING 1 UNIT

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Rolf Najork (Vorsitzender / President), Dr. Markus Forschner; Dr. Steffen Haack; Dr. Bertram Hoffmann;
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Werner Struth
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R910984654 89275 Elchingen

Germany
Drawing: R910984655
+49 (0)7308/82-2126
Designation: ROTARY GROUP

Status of version: 05/2019 Date: 15.05.2019

Page: 11

Pos. Material number Designation Quantity

32 R910967195 O-RING 1 UNIT

34 R909083360 RETAINING RING 1 UNIT
35 R910742147 RETAINING RING 2 UNIT
40 R910188697 RETAINING RING 1 UNIT
42 R902650872 SOCKET HEAD CAP SCREW 8 UNIT
43 R910109592 SOCKET HEAD CAP SCREW 6 UNIT
44 R910963692 PARALLEL KEY 1 UNIT
45 R910993628 RETAINING RING 1 UNIT
46 R910993629 RETAINING RING 1 UNIT
47 R910993630 RETAINING RING 1 UNIT
48 R910993631 RETAINING RING 1 UNIT

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Rolf Najork (Vorsitzender / President), Dr. Markus Forschner; Dr. Steffen Haack; Dr. Bertram Hoffmann;
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Werner Struth
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R910984654 89275 Elchingen

Germany
Drawing: R910984655
+49 (0)7308/82-2126
Designation: ROTARY GROUP

Status of version: 05/2019 Date: 15.05.2019

Page: 12

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Rolf Najork (Vorsitzender / President), Dr. Markus Forschner; Dr. Steffen Haack; Dr. Bertram Hoffmann;
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Werner Struth
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R910988557 89275 Elchingen

Germany
Drawing: R910984657
+49 (0)7308/82-2126
Designation: CONNECTION PLATE

Status of version: 05/2019 Date: 15.05.2019

Page: 13

Pos. Material number Designation Quantity

1 R910988546 CONNECTION PLATE 1 UNIT

3 R910926648 NON-RETURN VALVE 2 UNIT
4 R909151692 SCREW PLUG 1 UNIT
5 R909153815 SCREW PLUG 2 UNIT D
6 DOUBLE BREAK-OFF PLUG 2 UNIT D
7 DOUBLE BREAK-OFF PLUG 1 UNIT
9 R910984421 THROTTLE SCREW 1 UNIT

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Rolf Najork (Vorsitzender / President), Dr. Markus Forschner; Dr. Steffen Haack; Dr. Bertram Hoffmann;
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Werner Struth
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R910988557 89275 Elchingen

Germany
Drawing: R910984657
+49 (0)7308/82-2126
Designation: CONNECTION PLATE

Status of version: 05/2019 Date: 15.05.2019

Page: 14

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Rolf Najork (Vorsitzender / President), Dr. Markus Forschner; Dr. Steffen Haack; Dr. Bertram Hoffmann;
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Werner Struth
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902544277 89275 Elchingen

Germany
Drawing: R910909505
+49 (0)7308/82-2126
Designation: STUD BOLT

Status of version: 05/2019 Date: 15.05.2019

Page: 15

Pos. Material number Designation Quantity

1 R902517220 STUD BOLT 1 UNIT

2 R910342157 O-RING 1 UNIT D

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Rolf Najork (Vorsitzender / President), Dr. Markus Forschner; Dr. Steffen Haack; Dr. Bertram Hoffmann;
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Werner Struth
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902544277 89275 Elchingen

Germany
Drawing: R910909505
+49 (0)7308/82-2126
Designation: STUD BOLT

Status of version: 05/2019 Date: 15.05.2019

Page: 16

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Rolf Najork (Vorsitzender / President), Dr. Markus Forschner; Dr. Steffen Haack; Dr. Bertram Hoffmann;
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Werner Struth
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: 89275 Elchingen

Germany
Drawing: R902419680
+49 (0)7308/82-2126
Designation: CONTROL

Status of version: 05/2019 Date: 15.05.2019

Page: 17

Pos. Material number Designation Quantity

1 ADJUSTING PIECE 1 UNIT L

2 R910984590 INTERMEDIATE PLATE 1 UNIT L
3 R910916038 CONTROL MODULE 1 UNIT L
4 R910916458 PLATE 1 UNIT L
5 R910916448 PLATE 1 UNIT L
6 R910923859 CONTROL VALVE 2 UNIT L
7 R910964881 BLOCK 1 UNIT L
8 R902405795 PROPORTIONAL PRESSURE RELIEF VALVE 1 UNIT L
9 R910977595 SOCKET HEAD CAP SCREW 4 UNIT
10 R910914670 SOCKET HEAD CAP SCREW 8 UNIT
11 R910917024 PIPING PLAN 1 UNIT L

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Rolf Najork (Vorsitzender / President), Dr. Markus Forschner; Dr. Steffen Haack; Dr. Bertram Hoffmann;
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Werner Struth
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: 89275 Elchingen

Germany
Drawing: R902419680
+49 (0)7308/82-2126
Designation: CONTROL

Status of version: 05/2019 Date: 15.05.2019

Page: 18

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Rolf Najork (Vorsitzender / President), Dr. Markus Forschner; Dr. Steffen Haack; Dr. Bertram Hoffmann;
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Werner Struth
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: 89275 Elchingen

Germany
Drawing: R902532171
+49 (0)7308/82-2126
Designation: ADJUSTING PIECE

Status of version: 05/2019 Date: 15.05.2019

Page: 19

Pos. Material number Designation Quantity

1 R902530764 ADJUSTING PISTON 1 UNIT

2 R910962806 PISTON HOUSING 1 UNIT
3 R910962907 BOLT 1 UNIT
4 R910937891 BOLT 1 UNIT
5 R910962908 SPRING DISK 2 UNIT
6 R910937890 NUT 2 UNIT
7 R910937889 CAP NUT 2 UNIT
8 R910962807 PISTON HOUSING 1 UNIT
9 R902519617 STOP SCREW 2 UNIT
10 R902519848 PISTON GUIDE 1 UNIT
12 R910514985 O-RING 2 UNIT
13 R910534528 O-RING 4 UNIT
14 R910963152 O-RING 2 UNIT

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Rolf Najork (Vorsitzender / President), Dr. Markus Forschner; Dr. Steffen Haack; Dr. Bertram Hoffmann;
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Werner Struth
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: 89275 Elchingen

Germany
Drawing: R902532171
+49 (0)7308/82-2126
Designation: ADJUSTING PIECE

Status of version: 05/2019 Date: 15.05.2019

Page: 20

Pos. Material number Designation Quantity

17 R909151979 SCREW PLUG 8 UNIT

18 R910922408 SOCKET HEAD CAP SCREW 8 UNIT
19 R910150681 RETAINING RING 1 UNIT
21 R902519565 STUD BOLT 2 UNIT
22 R910105333 HEXAGON NUT 2 UNIT
23 R909083489 SETSCREW 1 UNIT
24 R909153815 SCREW PLUG 2 UNIT
25 R909153365 SCREW PLUG 1 UNIT
27 R910962977 COMPRESSION SPRING 1 UNIT
29 R910933995 NUT 2 UNIT
30 R910962998 RING 1 UNIT
31 R910544736 O-RING 1 UNIT
32 R910962999 RING 1 UNIT

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Rolf Najork (Vorsitzender / President), Dr. Markus Forschner; Dr. Steffen Haack; Dr. Bertram Hoffmann;
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Werner Struth
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: 89275 Elchingen

Germany
Drawing: R902532171
+49 (0)7308/82-2126
Designation: ADJUSTING PIECE

Status of version: 05/2019 Date: 15.05.2019

Page: 21

Pos. Material number Designation Quantity

33 R910963001 O-RING 1 UNIT

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Rolf Najork (Vorsitzender / President), Dr. Markus Forschner; Dr. Steffen Haack; Dr. Bertram Hoffmann;
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Werner Struth
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: 89275 Elchingen

Germany
Drawing: R902532171
+49 (0)7308/82-2126
Designation: ADJUSTING PIECE

Status of version: 05/2019 Date: 15.05.2019

Page: 22

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Rolf Najork (Vorsitzender / President), Dr. Markus Forschner; Dr. Steffen Haack; Dr. Bertram Hoffmann;
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Werner Struth
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R910984590 89275 Elchingen

Germany
Drawing: R910917016
+49 (0)7308/82-2126
Designation: INTERMEDIATE PLATE

Status of version: 05/2019 Date: 15.05.2019

Page: 23

Pos. Material number Designation Quantity

1 R910984247 INTERMEDIATE PLATE 1 UNIT

2 R902650639 NON-RETURN VALVE 2 UNIT
3 R910979807 NON-RETURN VALVE 1 UNIT
4 R909151694 SCREW PLUG 2 UNIT D
5 R910538884 SETSCREW 2 UNIT
6 R909151979 SCREW PLUG 2 UNIT D
7 DOUBLE BREAK-OFF PLUG 1 UNIT
8 DOUBLE BREAK-OFF PLUG 1 UNIT D
11 R910120308 SOCKET HEAD CAP SCREW 2 UNIT
12 R910106879 CLAMPING SLEEVE 2 UNIT
13 R910514985 O-RING 4 UNIT D
14 R910914340 O-RING 1 UNIT D
16 R909153815 SCREW PLUG 1 UNIT

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Rolf Najork (Vorsitzender / President), Dr. Markus Forschner; Dr. Steffen Haack; Dr. Bertram Hoffmann;
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Werner Struth
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R910984590 89275 Elchingen

Germany
Drawing: R910917016
+49 (0)7308/82-2126
Designation: INTERMEDIATE PLATE

Status of version: 05/2019 Date: 15.05.2019

Page: 24

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Rolf Najork (Vorsitzender / President), Dr. Markus Forschner; Dr. Steffen Haack; Dr. Bertram Hoffmann;
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Werner Struth
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R910916038 89275 Elchingen

Germany
Drawing: R902532637
+49 (0)7308/82-2126
Designation: CONTROL MODULE

Status of version: 05/2019 Date: 15.05.2019

Page: 25

Pos. Material number Designation Quantity

1 R902403705 CONTROL HOUSING 1 UNIT

2 R910917917 CONTROL SLEEVE 1 UNIT
4 R902532587 COVER 1 UNIT
5 R910906125 NUT 1 UNIT
6 R910918275 LEVER 1 UNIT
7 R902519715 ADJUSTING SCREW 1 UNIT
8 R902517331 CONTROL PISTON 1 UNIT
9 R910916051 COUNTER NUT 1 UNIT
10 R910916052 SHIM RING 1 UNIT
11 R910916055 SPRING SLEEV 1 UNIT
12 R910916045 SPRING DISK 2 UNIT
13 R910916050 SUPPORTING DISC 1 UNIT
15 R910106003 RETAINING RING 1 UNIT

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Rolf Najork (Vorsitzender / President), Dr. Markus Forschner; Dr. Steffen Haack; Dr. Bertram Hoffmann;
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Werner Struth
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R910916038 89275 Elchingen

Germany
Drawing: R902532637
+49 (0)7308/82-2126
Designation: CONTROL MODULE

Status of version: 05/2019 Date: 15.05.2019

Page: 26

Pos. Material number Designation Quantity

16 R910127671 SHIM RING 1 UNIT

17 R910127663 SHIM RING 1 UNIT
18 R910534838 SHIM RING 2 UNIT
19 R910514764 SHIM RING 2 UNIT
20 R910903390 NUT 1 UNIT
21 R902517329 CAP NUT 1 UNIT
22 R910102067 O-RING 2 UNIT D
23 R910514896 O-RING 2 UNIT D
24 R910977045 O-RING 1 UNIT D
25 R910513598 O-RING 1 UNIT D
26 R910914340 O-RING 1 UNIT D
28 R910109282 SOCKET HEAD CAP SCREW 1 UNIT
29 R910109347 SOCKET HEAD CAP SCREW 4 UNIT

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Rolf Najork (Vorsitzender / President), Dr. Markus Forschner; Dr. Steffen Haack; Dr. Bertram Hoffmann;
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Werner Struth
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R910916038 89275 Elchingen

Germany
Drawing: R902532637
+49 (0)7308/82-2126
Designation: CONTROL MODULE

Status of version: 05/2019 Date: 15.05.2019

Page: 27

Pos. Material number Designation Quantity

30 R910109479 SOCKET HEAD CAP SCREW 1 UNIT

31 R910399957 SOCKET HEAD CAP SCREW 4 UNIT
32 R909153364 SCREW PLUG 4 UNIT D
34 R909153365 SCREW PLUG 1 UNIT D
35 DOUBLE BREAK-OFF PLUG 1 UNIT
36 R910303518 SETSCREW 2 UNIT
38 R910106879 CLAMPING SLEEVE 2 UNIT
39 R910117676 CLAMPING SLEEVE 2 UNIT
40 R910593044 NOZZLE 2 UNIT
41 R910101079 SETSCREW 1 UNIT
42 R910515124 O-RING 2 UNIT

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Rolf Najork (Vorsitzender / President), Dr. Markus Forschner; Dr. Steffen Haack; Dr. Bertram Hoffmann;
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Werner Struth
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R910916038 89275 Elchingen

Germany
Drawing: R902532637
+49 (0)7308/82-2126
Designation: CONTROL MODULE

Status of version: 05/2019 Date: 15.05.2019

Page: 28

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Rolf Najork (Vorsitzender / President), Dr. Markus Forschner; Dr. Steffen Haack; Dr. Bertram Hoffmann;
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Werner Struth
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R910916458 89275 Elchingen

Germany
Drawing: R910916459
+49 (0)7308/82-2126
Designation: PLATE

Status of version: 05/2019 Date: 15.05.2019

Page: 29

Pos. Material number Designation Quantity

1 R910916460 PLATE 1 UNIT

2 R910102067 O-RING 5 UNIT D
3 R910109681 SOCKET HEAD CAP SCREW 2 UNIT
4 DOUBLE BREAK-OFF PLUG 2 UNIT

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Rolf Najork (Vorsitzender / President), Dr. Markus Forschner; Dr. Steffen Haack; Dr. Bertram Hoffmann;
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Werner Struth
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R910916458 89275 Elchingen

Germany
Drawing: R910916459
+49 (0)7308/82-2126
Designation: PLATE

Status of version: 05/2019 Date: 15.05.2019

Page: 30

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Rolf Najork (Vorsitzender / President), Dr. Markus Forschner; Dr. Steffen Haack; Dr. Bertram Hoffmann;
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Werner Struth
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R910916448 89275 Elchingen

Germany
Drawing: R910916449
+49 (0)7308/82-2126
Designation: PLATE

Status of version: 05/2019 Date: 15.05.2019

Page: 31

Pos. Material number Designation Quantity

1 R910916450 PLATE 1 UNIT

2 R910102067 O-RING 5 UNIT D
3 R910109681 SOCKET HEAD CAP SCREW 2 UNIT
4 DOUBLE BREAK-OFF PLUG 2 UNIT

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Rolf Najork (Vorsitzender / President), Dr. Markus Forschner; Dr. Steffen Haack; Dr. Bertram Hoffmann;
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Werner Struth
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R910916448 89275 Elchingen

Germany
Drawing: R910916449
+49 (0)7308/82-2126
Designation: PLATE

Status of version: 05/2019 Date: 15.05.2019

Page: 32

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Rolf Najork (Vorsitzender / President), Dr. Markus Forschner; Dr. Steffen Haack; Dr. Bertram Hoffmann;
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Werner Struth
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R910923859 89275 Elchingen

Germany
Drawing: R902428429
+49 (0)7308/82-2126
Designation: CONTROL VALVE

Status of version: 05/2019 Date: 15.05.2019

Page: 33

Pos. Material number Designation Quantity

1 R902539118 CONTROL VALVE 1 UNIT L

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Rolf Najork (Vorsitzender / President), Dr. Markus Forschner; Dr. Steffen Haack; Dr. Bertram Hoffmann;
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Werner Struth
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R910923859 89275 Elchingen

Germany
Drawing: R902428429
+49 (0)7308/82-2126
Designation: CONTROL VALVE

Status of version: 05/2019 Date: 15.05.2019

Page: 34

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Rolf Najork (Vorsitzender / President), Dr. Markus Forschner; Dr. Steffen Haack; Dr. Bertram Hoffmann;
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Werner Struth
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902539118 89275 Elchingen

Germany
Drawing:
+49 (0)7308/82-2126
Designation: CONTROL VALVE

Status of version: 05/2019 Date: 15.05.2019

Page: 35

Pos. Material number Designation Quantity

1 R902428208 VALVE HOUSING 1 UNIT

2 R902532286 CONTROL 1 UNIT L
3 R910914306 SPRING DISK 1 UNIT
4 R910914305 VALVE SPOOL 1 UNIT
5 R910914300 SPRING HOUSING 1 UNIT
6 R910914303 COVER 1 UNIT
7 R910914302 CONTROL PISTON 1 UNIT
8 R910999155 CONTROL SLEEVE 1 UNIT
9 R910931601 COMPRESSION SPRING 1 UNIT
10 R910931602 COMPRESSION SPRING 1 UNIT
11 R909151979 SCREW PLUG 3 UNIT D
12 R910971035 O-RING 1 UNIT D
14 R910102067 O-RING 5 UNIT

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Rolf Najork (Vorsitzender / President), Dr. Markus Forschner; Dr. Steffen Haack; Dr. Bertram Hoffmann;
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Werner Struth
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902539118 89275 Elchingen

Germany
Drawing:
+49 (0)7308/82-2126
Designation: CONTROL VALVE

Status of version: 05/2019 Date: 15.05.2019

Page: 36

Pos. Material number Designation Quantity

15 R909154024 SCREW PLUG 5 UNIT D

16 DOUBLE BREAK-OFF PLUG 1 UNIT
18 R910465976 SETSCREW 1 UNIT
19 R910927043 NOZZLE 1 UNIT
20 R910584614 SOCKET HEAD CAP SCREW 8 UNIT
21 R910587524 O-RING 1 UNIT D
22 R910921023 CYLINDRICAL ROLLER 1 UNIT
26 R910925020 BACKUP RING 1 UNIT D
27 R910921451 BACKUP RING 1 UNIT D
29 R910929747 RING 1 UNIT

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Rolf Najork (Vorsitzender / President), Dr. Markus Forschner; Dr. Steffen Haack; Dr. Bertram Hoffmann;
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Werner Struth
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902532286 89275 Elchingen

Germany
Drawing: R902538790
+49 (0)7308/82-2126
Designation: CONTROL

Status of version: 05/2019 Date: 15.05.2019

Page: 37

Pos. Material number Designation Quantity

1 R902538781 SCREW PLUG 1 UNIT

2 R910789186 NUT 1 UNIT
3 R910920777 CAP 1 UNIT
4 R910913392 BACKUP RING 1 UNIT D
5 R902538779 SPINDLE 1 UNIT
6 R902538780 SPRING RETAINER 1 UNIT
7 R910913376 WASHER 1 UNIT
8 R910789232 O-RING 1 UNIT D
9 R910102032 O-RING 1 UNIT D

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Rolf Najork (Vorsitzender / President), Dr. Markus Forschner; Dr. Steffen Haack; Dr. Bertram Hoffmann;
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Werner Struth
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902532286 89275 Elchingen

Germany
Drawing: R902538790
+49 (0)7308/82-2126
Designation: CONTROL

Status of version: 05/2019 Date: 15.05.2019

Page: 38

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Rolf Najork (Vorsitzender / President), Dr. Markus Forschner; Dr. Steffen Haack; Dr. Bertram Hoffmann;
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Werner Struth
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R910964881 89275 Elchingen

Germany
Drawing: R902424269
+49 (0)7308/82-2126
Designation: BLOCK

Status of version: 05/2019 Date: 15.05.2019

Page: 39

Pos. Material number Designation Quantity

1 R910964720 BLOCK 1 UNIT

2 R910917061 STRAIGHT PIN 1 UNIT
3 R909151979 SCREW PLUG 2 UNIT D
4 R910120316 SOCKET HEAD CAP SCREW 3 UNIT
5 DOUBLE BREAK-OFF PLUG 2 UNIT
6 DOUBLE BREAK-OFF PLUG 1 UNIT
7 R909153364 SCREW PLUG 1 UNIT
8 R910514543 O-RING 2 UNIT D
9 R910513539 O-RING 1 UNIT D
11 R909154024 SCREW PLUG 3 UNIT

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Rolf Najork (Vorsitzender / President), Dr. Markus Forschner; Dr. Steffen Haack; Dr. Bertram Hoffmann;
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Werner Struth
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R910964881 89275 Elchingen

Germany
Drawing: R902424269
+49 (0)7308/82-2126
Designation: BLOCK

Status of version: 05/2019 Date: 15.05.2019

Page: 40

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Rolf Najork (Vorsitzender / President), Dr. Markus Forschner; Dr. Steffen Haack; Dr. Bertram Hoffmann;
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Werner Struth
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902405795 89275 Elchingen

Germany
Drawing: R902402530
+49 (0)7308/82-2126
Designation: PROPORTIONAL PRESSURE RELIEF VALVE

Status of version: 05/2019 Date: 15.05.2019

Page: 41

Pos. Material number Designation Quantity

1 R900962999 PROPORTIONAL PRESSURE RELIEF VALVE 1 UNIT

2 R913022796 PLUG-IN CONNECTOR 1 UNIT
3 R913022795 PLUG-IN CONNECTOR 1 UNIT

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Rolf Najork (Vorsitzender / President), Dr. Markus Forschner; Dr. Steffen Haack; Dr. Bertram Hoffmann;
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Werner Struth
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902405795 89275 Elchingen

Germany
Drawing: R902402530
+49 (0)7308/82-2126
Designation: PROPORTIONAL PRESSURE RELIEF VALVE

Status of version: 05/2019 Date: 15.05.2019

Page: 42

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Rolf Najork (Vorsitzender / President), Dr. Markus Forschner; Dr. Steffen Haack; Dr. Bertram Hoffmann;
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Werner Struth
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R910917024 89275 Elchingen

Germany
Drawing: R910917025
+49 (0)7308/82-2126
Designation: PIPING PLAN

Status of version: 05/2019 Date: 15.05.2019

Page: 43

Pos. Material number Designation Quantity

1 R902410480 PIPING 1 UNIT L

2 R902410467 PIPING 1 UNIT L

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Rolf Najork (Vorsitzender / President), Dr. Markus Forschner; Dr. Steffen Haack; Dr. Bertram Hoffmann;
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Werner Struth
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R910917024 89275 Elchingen

Germany
Drawing: R910917025
+49 (0)7308/82-2126
Designation: PIPING PLAN

Status of version: 05/2019 Date: 15.05.2019

Page: 44

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Rolf Najork (Vorsitzender / President), Dr. Markus Forschner; Dr. Steffen Haack; Dr. Bertram Hoffmann;
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Werner Struth
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902410480 89275 Elchingen

Germany
Drawing: R902408794
+49 (0)7308/82-2126
Designation: PIPING

Status of version: 05/2019 Date: 15.05.2019

Page: 45

Pos. Material number Designation Quantity

1 R902408792 PIPE 1 UNIT L

2 R910789038 THREADED FASTENER 1 UNIT
3 R910948774 INTERMEDIATE RING 2 UNIT
4 R910960552 MALE CONNECTOR 1 UNIT
5 R910723126 PLUG 1 UNIT
6 R910965694 FASTENING CLAMP 1 UNIT
7 R910947703 SLEEVE 1 UNIT

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Rolf Najork (Vorsitzender / President), Dr. Markus Forschner; Dr. Steffen Haack; Dr. Bertram Hoffmann;
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Werner Struth
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902410480 89275 Elchingen

Germany
Drawing: R902408794
+49 (0)7308/82-2126
Designation: PIPING

Status of version: 05/2019 Date: 15.05.2019

Page: 46

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Rolf Najork (Vorsitzender / President), Dr. Markus Forschner; Dr. Steffen Haack; Dr. Bertram Hoffmann;
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Werner Struth
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902408792 89275 Elchingen

Germany
Drawing:
+49 (0)7308/82-2126
Designation: PIPE

Status of version: 05/2019 Date: 15.05.2019

Page: 47

Pos. Material number Designation Quantity

1 R910997196 PIPE 900 Myanmar

2 R910960554 UNION NUT 2 UNIT
3 R910947703 SLEEVE 2 UNIT

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Rolf Najork (Vorsitzender / President), Dr. Markus Forschner; Dr. Steffen Haack; Dr. Bertram Hoffmann;
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Werner Struth
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902410467 89275 Elchingen

Germany
Drawing: R902408795
+49 (0)7308/82-2126
Designation: PIPING

Status of version: 05/2019 Date: 15.05.2019

Page: 48

Pos. Material number Designation Quantity

1 R902408793 PIPE 1 UNIT L

2 R910789038 THREADED FASTENER 1 UNIT
3 R910948774 INTERMEDIATE RING 2 UNIT
4 R910963659 THREADED FASTENER 1 UNIT
5 R910723126 PLUG 1 UNIT
6 R910947703 SLEEVE 1 UNIT

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Rolf Najork (Vorsitzender / President), Dr. Markus Forschner; Dr. Steffen Haack; Dr. Bertram Hoffmann;
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Werner Struth
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902410467 89275 Elchingen

Germany
Drawing: R902408795
+49 (0)7308/82-2126
Designation: PIPING

Status of version: 05/2019 Date: 15.05.2019

Page: 49

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Rolf Najork (Vorsitzender / President), Dr. Markus Forschner; Dr. Steffen Haack; Dr. Bertram Hoffmann;
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Werner Struth
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902408793 89275 Elchingen

Germany
Drawing:
+49 (0)7308/82-2126
Designation: PIPE

Status of version: 05/2019 Date: 15.05.2019

Page: 50

Pos. Material number Designation Quantity

1 R910997196 PIPE 500 Myanmar

2 R910960554 UNION NUT 2 UNIT
3 R910947703 SLEEVE 2 UNIT

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Rolf Najork (Vorsitzender / President), Dr. Markus Forschner; Dr. Steffen Haack; Dr. Bertram Hoffmann;
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Werner Struth
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R910984783 89275 Elchingen

Germany
Drawing: R902532634
+49 (0)7308/82-2126
Designation: SPRING PACK

Status of version: 05/2019 Date: 15.05.2019

Page: 51

Pos. Material number Designation Quantity

1 R910962976 COMPRESSION SPRING 1 UNIT

2 R902519005 COMPRESSION SPRING 2 UNIT
3 R910942068 THROTTLE SCREW 1 UNIT
4 R910942068 THROTTLE SCREW 1 UNIT
5 R910942068 THROTTLE SCREW 1 UNIT
6 R902519716 SCREW PLUG 1 UNIT

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Rolf Najork (Vorsitzender / President), Dr. Markus Forschner; Dr. Steffen Haack; Dr. Bertram Hoffmann;
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Werner Struth
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R910984783 89275 Elchingen

Germany
Drawing: R902532634
+49 (0)7308/82-2126
Designation: SPRING PACK

Status of version: 05/2019 Date: 15.05.2019

Page: 52

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Rolf Najork (Vorsitzender / President), Dr. Markus Forschner; Dr. Steffen Haack; Dr. Bertram Hoffmann;
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Werner Struth
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R910964071 89275 Elchingen

Germany
Drawing: R910964072
+49 (0)7308/82-2126
Designation: AXIAL-PISTON PUMP

Status of version: 05/2019 Date: 15.05.2019

Page: 53

Pos. Material number Designation Quantity

1 R910650919 PRESSURE RELIEF VALVE 1 UNIT

2 R910964073 VALVE HOUSING 1 UNIT
3 R910923331 COVER 2 UNIT L
4 R910733393 VALVE INSERT 2 UNIT
5 R910733407 VALVE SPOOL 2 UNIT
6 R910964075 VALVE SEAT 1 UNIT
7 R910051365 COMPRESSION SPRING 2 UNIT
9 R910102598 O-RING 2 UNIT D
10 R910513709 O-RING 2 UNIT D
11 R910523267 O-RING 6 UNIT D
12 R910102067 O-RING 2 UNIT D
14 R910650927 BACKUP RING 2 UNIT D
15 R910650935 BACKUP RING 8 UNIT D

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Rolf Najork (Vorsitzender / President), Dr. Markus Forschner; Dr. Steffen Haack; Dr. Bertram Hoffmann;
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Werner Struth
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R910964071 89275 Elchingen

Germany
Drawing: R910964072
+49 (0)7308/82-2126
Designation: AXIAL-PISTON PUMP

Status of version: 05/2019 Date: 15.05.2019

Page: 54

Pos. Material number Designation Quantity

17 R900438939 PRESSURE RELIEF VALVE 2 UNIT L

18 R909151979 SCREW PLUG 8 UNIT D
20 R909153862 SCREW PLUG 1 UNIT D
21 R910100587 NOZZLE 1 UNIT
22 R910109509 SOCKET HEAD CAP SCREW 4 UNIT
23 R910120782 SOCKET HEAD CAP SCREW 8 UNIT
24 R910121045 SOCKET HEAD CAP SCREW 4 UNIT
25 R910100757 SPRING LOCK WASHER 4 UNIT
26 R910100838 SPRING LOCK WASHER 8 UNIT
28 DOUBLE BREAK-OFF PLUG 5 UNIT
30 R910116084 NOZZLE 2 UNIT
31 R910100595 NOZZLE 2 UNIT
32 R910534528 O-RING 1 UNIT

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Rolf Najork (Vorsitzender / President), Dr. Markus Forschner; Dr. Steffen Haack; Dr. Bertram Hoffmann;
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Werner Struth
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R910964071 89275 Elchingen

Germany
Drawing: R910964072
+49 (0)7308/82-2126
Designation: AXIAL-PISTON PUMP

Status of version: 05/2019 Date: 15.05.2019

Page: 55

Pos. Material number Designation Quantity

33 R910990093 VALVE INSERT 1 UNIT

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Rolf Najork (Vorsitzender / President), Dr. Markus Forschner; Dr. Steffen Haack; Dr. Bertram Hoffmann;
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Werner Struth
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R910964071 89275 Elchingen

Germany
Drawing: R910964072
+49 (0)7308/82-2126
Designation: AXIAL-PISTON PUMP

Status of version: 05/2019 Date: 15.05.2019

Page: 56

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Rolf Najork (Vorsitzender / President), Dr. Markus Forschner; Dr. Steffen Haack; Dr. Bertram Hoffmann;
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Werner Struth
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R910923331 89275 Elchingen

Germany
Drawing: R910733385
+49 (0)7308/82-2126
Designation: COVER

Status of version: 05/2019 Date: 15.05.2019

Page: 57

Pos. Material number Designation Quantity

1 R910650838 COVER 1 UNIT

2 R910650854 VALVE SPOOL 1 UNIT

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Rolf Najork (Vorsitzender / President), Dr. Markus Forschner; Dr. Steffen Haack; Dr. Bertram Hoffmann;
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Werner Struth
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R910923331 89275 Elchingen

Germany
Drawing: R910733385
+49 (0)7308/82-2126
Designation: COVER

Status of version: 05/2019 Date: 15.05.2019

Page: 58

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Rolf Najork (Vorsitzender / President), Dr. Markus Forschner; Dr. Steffen Haack; Dr. Bertram Hoffmann;
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Werner Struth
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Bgm.-Dr.-Nebel-Str. 8

Material number: R900438939 97816 Lohr

Germany
Drawing: RA00007756
Designation: PRESSURE RELIEF VALVE

Status of version: 05/2019 Date: 15.05.2019

Page: 59

Pos. Material number Designation Quantity

999 R961007442 SEAL KIT 1 UNIT L

SEALKITDBD.6K1C/V

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Rolf Najork (Vorsitzender / President), Dr. Markus Forschner; Dr. Steffen Haack; Dr. Bertram Hoffmann;
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Werner Struth
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Bgm.-Dr.-Nebel-Str. 8

Material number: R900438939 97816 Lohr

Germany
Drawing: RA00007756
Designation: PRESSURE RELIEF VALVE

Status of version: 05/2019 Date: 15.05.2019

Page: 60

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Rolf Najork (Vorsitzender / President), Dr. Markus Forschner; Dr. Steffen Haack; Dr. Bertram Hoffmann;
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Werner Struth
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Bgm.-Dr.-Nebel-Str. 8

Material number: R961007442 97816 Lohr

Germany
Drawing: RA00007756
Designation: SEAL KIT
SEALKITDBD.6K1C/V

Status of version: 05/2019 Date: 15.05.2019

Page: 61

Pos. Material number Designation Quantity

5 BONDED SEAL RING 1 UNIT

7 O-RING 1 UNIT
8 BACKUP RING 1 UNIT
15 R-RING 1 UNIT

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Rolf Najork (Vorsitzender / President), Dr. Markus Forschner; Dr. Steffen Haack; Dr. Bertram Hoffmann;
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Werner Struth
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R910901155 89275 Elchingen

Germany
Drawing: R902547416
+49 (0)7308/82-2126
Designation: INDUCTIVE POS.TRANSDUCER

Status of version: 05/2019 Date: 15.05.2019

Page: 62

Pos. Material number Designation Quantity

1 R902537118 REDUCTION 1 UNIT

2 R902408261 CARRIER 1 UNIT
3 R910744506 SEAL RING 1 UNIT D
4 R910906758 COMPRESSION SPRING 1 UNIT
5 R913019230 SETSCREW 1 UNIT
7 DISPLACEMENT SENS 1 UNIT

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Rolf Najork (Vorsitzender / President), Dr. Markus Forschner; Dr. Steffen Haack; Dr. Bertram Hoffmann;
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Werner Struth
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R910901155 89275 Elchingen

Germany
Drawing: R902547416
+49 (0)7308/82-2126
Designation: INDUCTIVE POS.TRANSDUCER

Status of version: 05/2019 Date: 15.05.2019

Page: 63

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Rolf Najork (Vorsitzender / President), Dr. Markus Forschner; Dr. Steffen Haack; Dr. Bertram Hoffmann;
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Werner Struth
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902537126 89275 Elchingen

Germany
Drawing: R902535324
+49 (0)7308/82-2126
Designation: PROTECTIVE TUBE

Status of version: 05/2019 Date: 15.05.2019

Page: 64

Pos. Material number Designation Quantity

1 R902537116 PROTECTIVE TUBE 1 UNIT

2 R910903348 HOSE CLAMP 1 UNIT

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Rolf Najork (Vorsitzender / President), Dr. Markus Forschner; Dr. Steffen Haack; Dr. Bertram Hoffmann;
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Werner Struth
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902537126 89275 Elchingen

Germany
Drawing: R902535324
+49 (0)7308/82-2126
Designation: PROTECTIVE TUBE

Status of version: 05/2019 Date: 15.05.2019

Page: 65

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Rolf Najork (Vorsitzender / President), Dr. Markus Forschner; Dr. Steffen Haack; Dr. Bertram Hoffmann;
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Werner Struth
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902557497 89275 Elchingen

Germany
Drawing: R902130640
+49 (0)7308/82-2126
Designation: FLANGE COVER

Status of version: 05/2019 Date: 15.05.2019

Page: 66

Pos. Material number Designation Quantity

1 R902603695 FLANGE COVER 1 UNIT

2 R902650192 WASHER 2 UNIT

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Rolf Najork (Vorsitzender / President), Dr. Markus Forschner; Dr. Steffen Haack; Dr. Bertram Hoffmann;
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Werner Struth
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902557497 89275 Elchingen

Germany
Drawing: R902130640
+49 (0)7308/82-2126
Designation: FLANGE COVER

Status of version: 05/2019 Date: 15.05.2019

Page: 67

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Rolf Najork (Vorsitzender / President), Dr. Markus Forschner; Dr. Steffen Haack; Dr. Bertram Hoffmann;
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Werner Struth