Professional Documents
Culture Documents
Process Pumps: Made by KSB
Process Pumps: Made by KSB
1316.52-10 G2 RPH
Process pumps
to API 610, 10th edition and ISO 13709
Standard bearing assemblies B 02 to B 06
Tandem bearing assemblies B 02 to B 06
Cooled/uncooled
Mechanical seal
Made by KSB
Certification
Certified quality management ISO 9001.
RPH
Selection chart 50 Hz
n = 2900 1/min
5 US.gpm 10 20 30 40 50 100 200 300 400 500 1000 2000 3000 4000 5000
4 5 IM.gpm 10 20 30 40 50 100 200 300 400 500 1000 2000 3000 4000
300
200-450
150-450A
200 50-450
80-450 100-450
200-450B
150-450B
500
40-361
150-360A 400
50-360 80-360 100-360A
100-360C 200-360
100
150-360B
300
40-280
40-281
80-280 100-280
50-280
150-280 200-280
100-280B 200
25-230
40-230 150-280B
40-231 200-280B
50
80-230
50-230
40
80-230B 100-230 150-230
150-230B
100-230B
30 100
25-180
80-180
H 40-180 50-180
100-180
[m] 40-181 80-180B
100-180B
20
50
ft
12 40
3
1 2 3 4 5 Q[m /h] 10 20 30 40 50 100 200 300 400 500 1000
Selection chart 50 Hz
n =1450 1/min
size on request
2
RPH
Selection chart 60 Hz
n = 3500 1/min
5 US.gpm 10 20 30 40 50 100 200 300 400 500 1000 2000 3000 4000 5000
4 5 IM.gpm 10 20 30 40 50 100 200 300 400 500 1000 2000 3000 4000
300
200 150-360A
40-361
50-360 80-360
100-360A 200-360
100-360C
500
150-360B
40-280
40-281 400
50-280
80-280
200-280
100
100-280
300
150-280
25-230
40-230 200-280B
40-231 100-280B
50-230 80-230B 80-230
150-280B
200
100-230
150-230
100-230B 150-230B
50
80-180
ft
40 25-180
40-180
50-180
40-181 100-180
80-180B
100-180B
30 100
H
[m]
20
3
1 2 3 4 5 Q[m /h] 10 20 30 40 50 100 200 300 400 500 1000
Selection chart 60 Hz
n =1750 1/min
size on request
3
RPH
Tandem bearing
assembly
D01048/2
Individual adjustment of axial Seal chamber to API 610 Steel bearing bracket with integrated
thrust balancing for maximum accommodates all mechanical cooling fins (fan impeller on option: no
bearing life. seals to API 682 cooling water circuit required for high
temperatures)
4
RPH
120.00
90.00
A217 Gr. CA15
80.00
70.00
0.00
--50 0 50 100 150 200 250 300 350 400 450
Operating temperature t °Ξ
Mechanical seals
The application limits of mechanical seals depend on the
circumferential speed, the material and the fluid handled.
Installation to API 682/ISO 21049 and pump design with dry
shaft possible.
5
RPH
6
Technical Data
RPH pumps are in compliance with the following standards:
API 610 / 10th edition
ISO 13709
25-180
25-230
40-180
40-230
40-181
40-231
40-280
40-281
40-361
50-180
50-230
50-280
50-360
50-450
80-180
80-230
80-280
80-360
80-450
100-180
100-230
100-280
150-230
100-360
100-450
150-280
150-360
150-450
200-280
200-360
200-450
150--501
150--630
200--401
200--501
250--401
250--501
200--670
250--630
250--710
Bearing bracket1) B 02 S B 02 L B 03 B 05 S B 05 L B 06
Impeller outlet width mm 6 6 6 6,2 7,8 7,7 7,5 7,7 7,9 10,9 10 9,6 9,6 10 17 14 12,5 11,5 28 22,3 17,8 35 12 15,5 14,5 28,5 22 43,1 19,5 35,5 28 23 40 32 63 43 20,9 26 38 38
inlet diam. mm 48 48 58 57 75 75 61 71 69 88 95 93 88 87 110 113 110 111 133 128 130 161 110 136 140 164 160 198 171 204 204 190 222 222 294 280 201, 220 275 275
9
-max. diam.2) mm 179 224 180 224 180 230 278 278 343 180 230 286 343 430 190 235 286 350 190 235 295 240 430 355 440 295 365 295 450 360 456 504 408 509 404 504 636 690 630 719
-min. diam. mm 120 180 130 180 130 180 220 230 280 140 180 230 280 340 140 190 230 280 150 190 230 190 350 295 355 230 295 235 360 295 360 400 320 400 320 400 520 530 515 520
motor--end mm 45 55 75 120
at coupling mm 32 42 60 95
Max. test pressure bar 1.5 times the operating pressure or as per API 610 / 10th edition
7
RPH
RPH
Pump sizes
DN Nominal impeller diameter
Dis- 180 181 230 231 280 281 360 361 401 450 501 630 670 710 Bear-
charge ing
nozzle bracket
25 X X B 02 S
40 X X X X X X X B 02 L
50 X X X X X B 03
80 X X1) X1) X1) X1)
B 05 S
100 X X1) X1) X1) X1)
150 X1) X1) X1) X1) X1)2) X1)2) B 05 L
200 X1) X1) X1)2) X1) X1)2) X1)2)
B 06
250 X1)2) X1)2) X1)2) X1)2)
The bearings are oil bath lubricated. An oil thrower can be fitted
(please contact KSB Pegnitz). Oil mist lubrication is also
possible.
A triple bearing design is available for handling extreme
operating conditions.
NPT threads are provided for cooling liquid connection,
constant-level oiler, oil drain and vent plug.
The bearings are designed for at least 25,000 operating hours
as per API 610/10th edition.
During pump standstill the oil level can be checked against the
mark next to the oil level sight glass.
Shaft seal
The pump is fitted with mechanical seals. The mechanical seal
chamber is designed in acc. with API 610, 10th edition.
Mechanical seals are provided in cartridge design only (API
682)!
8
RPH
Coating and Preservation (to AN 1865) The following acceptance tests may be performed at extra
Material class (Europe) charge:
RPH S-1, C-6 < 150 °C N 1 1 1 W Performance test API 610 1 measuring point /
5 measuring points
RPH S-1, C-6 ≥ 150 °C N 7 7 7 W
Performance test ISO 9906/1 1 measuring point /
RPH A8 < 150 °C N 0 1 1 U 5 measuring points
RPH A8 ≥ 150 °C N 0 7 7 U Performance test ISO 9906/2 1 measuring point /
5 measuring points
Key: Performance test ISO 9906/2A 1 measuring point /
Treatment of unmachined parts 5 measuring points
Coating - pressure-retaining parts NPSH test 1 measuring point/
Coating - bearing bracket, baseplate 5 measuring points
Coating - motor Warranties are given within the scope of the valid delivery
Preservation conditions.
N = reaction primer; wetted components without first primer
coat (internal and external)
0 = without finish coat
External Nozzle Forces and Moments
1 = synthetic enamel RAL 5002, ultramarine blue
7 = aluminium paint (synthetic resin base) RAL 9007
Discharge nozzle
aluminium-grey
U = steel shot blasting
W = rinsed with water repellent; bright parts liable to rust with
protective coating
9
RPH
1) Not for material variant S 2) = for pressurized tandem seals 4) longer shaft for fan cooling
and bearing bracket B 06 3) = for ”back-to-back” seals
10
RPH
Complementary sizes RPH
Bearing brackets B 05/B 06
1) Not for material variant S 2) = for pressurized tandem seals 4) longer shaft for fan cooling
and bearing bracket B 06 3) = for ”back-to-back” seals
Pump Weight Bear- Pump dimensions Shaft end Foot bolts Drain line
size ing d1 Ø
bracket
kg DN1 DN2 a c c’ f f’ g1 h2 m1 n1 n3 n6 r k6 l t u y i1 m2 n2 s1 z e1 r1 a1
150-501 516 B 05 L 200 150 180 1040 1079.5 860 899.5 90 500 180 960 820 0 370 605) 140 64 18 180 60 120 900 33 165 0 315 63.5
150-630 1190 B 06 200 150 250 1385 1435 1135 1185 90 670 310 1200 1020 60 465 955) 170 100 25 250 105 210 1120 36 260 85 412.5 80
200-401 528 B 05 L 250 200 190 1055 1094.5 865 904.5 90 510 180 960 820 0 390 605) 140 64 18 180 60 120 900 33 165 0 330 64.5
200-501 676 B 05 L 250 200 200 1045 1084.5 845 884.5 90 560 180 1060 920 0 420 605) 140 64 18 180 60 120 1000 33 165 0 360 78.5
200-670 1440 B 06 250 200 250 1380 1430 1130 1180 90 670 310 1360 1180 0 485 955) 170 100 25 250 105 210 1280 36 260 0 425 73
250-401 734 B 05 L 300 250 240 1100 1139.5 860 899.5 90 600 210 1160 1000 0 425 605) 140 64 18 180 75 150 1080 33 165 0 365 105
250-501 926 B 05 L 300 250 200 1060 1099.5 860 899.5 90 670 210 1200 1040 0 475 605) 140 64 18 180 75 150 1120 33 165 0 412 102
250-630 1500 B 06 300 250 300 1390 1440 1090 1140 90 750 310 1200 1020 70 485 955) 170 100 25 250 105 210 1120 36 260 0 425 108
250-710 1630 B 06 300 250 300 1380 1430 1080 1130 90 800 310 1460 1280 0 560 955) 170 100 25 250 105 210 1380 36 260 0 500 122
5) d1 Ø n6
11
RPH
Connections
- Vapour)
Single-acting mechanical seal Mechanical seal: dual seal Mechanical seal: dual seal Mech. seal in back-to-back Single-acting mechanical seal
with quench supply (unpressurized tandem (pressurized tandem arrangement) arrangement (API 23)
arrangement)
API-Standard
Vapour)
uncooled
D01040/3
cooled
13
RPH
uncooled
D01042/3
cooled
Design Variants
D01044
Bearing bracket, cooled
Inducer
D01047
D01043
D01044
15
RPH
D01127
Oil mist lubrication
D01126
Heatable casing
15.03.2009
1316.52-10
KSB Aktiengesellschaft
P.O. Box 1361 • 91253 Pegnitz • Bahnhofplatz 1 • 91257 Pegnitz (Germany)
Tel. +49 9241 71-0 • Fax +49 9241 71-1793
www.ksb.com