Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 128 views

    DBT 30M4-NP Cont Miner - Gen Specs For SCCL

    Uploaded by

    Sushant
    The document provides specifications for a DBT 30M4-NP continuous miner designed for hard cutting conditions and narrow roadways. Some key specs include a maximum mining height of 4660mm, 1168mm diameter cutting drum, loading capacity of 15 to 27 tonnes per minute, 599kW of continuous power rating, and dust suppression by a 4.8 cubic m/sec wet bed scrubber. It is intended to meet requirements for underground coal mining in India.

    Copyright:

    © All Rights Reserved
    Download as DOC, PDF, TXT or read online from Scribd

    DBT 30M4-NP Cont Miner - Gen Specs For SCCL

    Uploaded by

    Sushant
    128 views5 pages
    The document provides specifications for a DBT 30M4-NP continuous miner designed for hard cutting conditions and narrow roadways. Some key specs include a maximum mining height of 4660mm, 1168mm diameter cutting drum, loading capacity of 15 to 27 tonnes per minute, 599kW of continuous power rating, and dust suppression by a 4.8 cubic m/sec wet bed scrubber. It is intended to meet requirements for underground coal mining in India.

    Original Title

    DBT 30M4-NP Cont Miner - Gen Specs for SCCL

    Copyright

    © © All Rights Reserved

    Available Formats

    DOC, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document provides specifications for a DBT 30M4-NP continuous miner designed for hard cutting conditions and narrow roadways. Some key specs include a maximum mining height of 4660mm, 1168mm diameter cutting drum, loading capacity of 15 to 27 tonnes per minute, 599kW of continuous power rating, and dust suppression by a 4.8 cubic m/sec wet bed scrubber. It is intended to meet requirements for underground coal mining in India.

    Copyright:

    © All Rights Reserved
    Download as DOC, PDF, TXT or read online from Scribd
    Download as doc, pdf, or txt
    128 views5 pages

    DBT 30M4-NP Cont Miner - Gen Specs For SCCL

    Uploaded by

    Sushant
    The document provides specifications for a DBT 30M4-NP continuous miner designed for hard cutting conditions and narrow roadways. Some key specs include a maximum mining height of 4660mm, 1168mm diameter cutting drum, loading capacity of 15 to 27 tonnes per minute, 599kW of continuous power rating, and dust suppression by a 4.8 cubic m/sec wet bed scrubber. It is intended to meet requirements for underground coal mining in India.

    Copyright:

    © All Rights Reserved
    Download as DOC, PDF, TXT or read online from Scribd
    Download as doc, pdf, or txt
    You are on page 1of 5
    At a glance
    Powered by AI
    The document discusses the technical specifications of the DBT 30M4-NP Continuous Miner which has been designed for high performance in hard cutting conditions, high seams and narrow roadway widths.

    The key technical specifications include the operating dimensions, ground clearance, lengths, widths, weights, cutting unit details, loading unit details, traction units details, electrical and hydraulic systems details.

    The dimensions provided include the maximum mining height, zero cutting clearance, ground clearance, length from rear bumper to face, transport height and length, main frame width, cutting drum diameter and width.

    Page 1 of 3

    March 2006

    The DBT 30M4-NP (Narrow Profile) type Continuous Miner has been specifically
    designed for high performance in hard cutting conditions, high seams and narrow
    roadway width.

    The key technical specifications of the DBT30M4-NP Continuous Miner offered to


    Singareni Collieries Company Limited are:

    Operating Dimensions
    Maximum Mining Height 4660 mm (With 350 mm Ground Clearance & 1168 mm Drum

    Zero Cutting Clearance 2074 mm (With 350 mm Ground Clearance & 1168 mm Drum)

    Ground Clearance 350 mm (Fixed)

    Length Rear Bumper to Face 8146 mm (With 46" Cutting Drum & Single Exhaust)

    Transport Dimensions
    Height 1836 mm (With 4.8 CU M/S Dust Collector & Dual Inlet)

    Overall Length 11286 mm (With 1168 mm Cutting Drum)

    Main Frame Width 3175 mm (Without Cutter Head & Gathering Pan)

    Weight (Total) 65 Tonnes

    Cutting Unit
    Cutting Drum Diameter 1168 mm

    Cutting Drum Width 3505 mm

    Cutting Head Power 2 X 186 kW Continuous Rating / 2 X 210 kW 1 hr Rating

    Loading Unit
    Loading Method 3 Arm Replaceable Tip Circular Loading Arm (CLA )/ 62 RPM

    Conveyor / CLA Power 2 X 41 kW Continuous Rating / 2 X 48 kW 1 hr Rating

    Gathering Pan Width 3346 mm

    Loading Capacity 15 to 27 tonnes per minute


    minute

    Conveyor Speed 145 m/min

    Conveyor Depth 305 mm

    Conveyor Width 762 mm

    Traction Units
    Crawler Chain Width 560 mm

    Ground Pressure 205 kPa

    Traction Power 2 X 37 KW DC Continuous Rating / 2 X 56 KW DC 1 hr Rating

    Crawler Speed 0 to 20 m/min

    Electrical System
    Machine Voltage 1140 VAC @ 50Hz - 10%

    Electrical Permissibility DGMS Approved

    Control System DBT Radio Remote Control System & Umbilical Cord Backup

    Page 2 of 5
    March 2006

    Hydraulic System
    Horse Power on Hydraulic Pump 1 X 41 kW Continuous Rating / 1 X 48 kW 1 hr Rating

    Hydraulic Pump Unit Tandem Gear Pump / 172 Bar / Open Centre Valve Bank

    Dust Suppression

    Scrubber Type & Capacity Wet Bed / 4.8 cubic m/sec

    Scrubber Power 1 X 30 kW Continuous Rating / 1 X 35 kW 1 hr Rating

    Total Installed Power 599 kW Continuous Rating/711 kW 1 hr Rating

    Note: Information based on DBT 30M4-NP General Arrangement Drawing

    No. 0802-001-022-30-00/SCCL DEH Jan 06

    Other Features
    Single Axial Fan, 4.8 m3/s Wet Bed Scrubber, Dual Inlet Support Frame Crossover Hood, Single L/H

    Discharge

    Hydraulic Oil Reservoir: Venturi type Auto-Fill

    DGMS Approved/MCI Quartz Halogen Machine Lighting System

    Trailing Cable Entry, right rear of machine with Junction Box

    Zoned Machine Lubrication System: (JIC Hoses and Fittings)

    Motors: Button type Grease Zerc (Manual Fill)

    Uni-Directional Dust Suppression Spray System (Right Hand Direction)

    Dust Suppression System Piping (JIC Water Hoses and Fittings)

    Hydraulic System Piping (JIC Hydraulic Hoses and Fittings)

    3140mm Conveyor Overhang

    230mm Weld on Conveyor Sideboards

    Cincinnati Conveyor Chain, 69.85mm pitch, 279.4mm spacing, 2.45 m/s chain speed

    Hydraulic Auto-Tensioning system for conveyor chain take-up

    Grease Cylinder with shim pack Crawler Chain Take-up

    1168mm Diameter Cutting Drum (76mm Double Scroll, Balanced Lacing with J-30mm Bit Blocks and

    Press Fit Sleeves)

    2.29m Minimum Mining Height required (with 350mm Ground Clearance & 1168mm Diameter Drums)

    Abrasive resistant plate (320 BNH) for conveyor deck

    Abrasive resistant plate (320 BNH) for gathering head deck

    DBT Standard Radio Remote Control with Display and Fault Logging

    DGMS Approved Methane Monitor, Single Readout Display

    Grouser Style : Chevrons ( \ / )

    Page 3 of 5
    Page 4 of 3
    Subject to Final Specification
    Rub Rail Assemblies on both sides of machine

    General Grease Points: Zoned to manifolds (Manual Fill)

    Gearboxes: Manual Fill

    1140VAC / Vacuum Contactors / DBT Processor-Based Control Electrical System (DGMS Approval)

    Fail to Safe Brakes

    Rear Bumper machine retriever hitch for de-pillaring

    March 2006

    Page 5 of 5

    You might also like