694+

694+
Supertrak

SPECIFICATION:
Screen Size: 6100mm x 1530mm (20’ x 5’) Top, Middle & Bottom deck screenbox
Net Engine Power: Tier 3 / Stage IIIA: Caterpillar C4.4 97kW (130hp)
Tier 4i / Stage IIIB: Caterpillar C4.4 98kW (131hp)
Tier 4F / Stage IV: Caterpillar C4.4 98kW (131hp)
Portability: Tracked
Operating Weight: 39,250kg (86,531lbs)*
*With tipping grid

217
 SPECIFICATION
HOPPER / FEEDER
Hopper Capacity: 8m³ (10.5yd³)
Feed height: 3.67m (12’)
Feed in width: 4.77m (15’ 8”) (grid wing plates)
Grid aperture: 100mm (4”)
10mm replaceable steel hopper liners
Drive: Hydraulic variable speed drive via high torque gearbox
Beltfeeder belt width: 1.2m (48”) Hopper
Belt Spec: Plain EP 630, 4 ply, 6 + 2mm covers.
Speed: variable, 0 - 16 mpm (0 - 53’ per min)
Wide mouth opening
MAIN CONVEYOR
Drive: Hydraulic variable speed drive via high torque 630cc motor
Belt width: 1.2m (48”)
Belt spec: Plain 3 ply belt, EP400
Hydraulic adjust
Belt Speed: 92 mpm (302’ per min) Vibrating Grid
Steel skirted full length of conveyor
SCREEN BOX
All decks: 6.1m x 1.53m (20’ x 5’)
Wedge side tensioned top and middle deck mesh
Hydraulic end tensioned bottom deck mesh
Drive: Hydraulic heavy duty 2-Bearing
Screen Angle: 18° - 30°, hydraulic adjust
Screen stroke standard: 7.5mm (5/16")
Screenspeed: 1000 rpm
Abrasion resistant material impact plate Conveyor - Middle Grade
Spreader plate
Galvanised access catwalks on both sides and top end of screen
Total screening area: 27.8m² (300ft²)

SIDE CONVEYORS
Drive: Hydraulic variable speed drive via high torque 500cc motor
Belt width: 800mm (32”)
Belt spec: Chevron EP400, 3 ply
Working Angle: 24°
Speed: Variable speed, 0 - 125 mpm (410’ per min)
Hydraulic Folding Conveyor - Oversize Plus

Discharge Height: 4.71m (15’ 5”)

Stockpile capacity: 193m³ (252yd³)

Conveyor - Oversize Minus

218
 694+
FINES CONVEYOR
Drive: Hydraulic variable speed drive via high torque 800cc motor
Belt width: 1.2m (48”)
Belt spec: Plain, 3 ply, EP400
Working Angle: Variable 25° (Max)
Rosta scraper on head drum
Speed: Not variable speed, 92mpm (302’ per min)
Standard Discharge Height: 5.2m (17’ 1”)
Stockpile capacity: 260m³ (340yd³) Fines Conveyor
OVERSIZE PLUS CONVEYOR
Drive: Hydraulic variable speed drive via high torque 500cc motor
Belt width: 500mm (20”)
Belt spec: Chevron, EP 315, 3 ply
Working Angle: Variable 22° (Max)
Speed: variable speed, 120 mpm (400’ per min)
Discharge Height: Variable 4.8m (Max)
Operating angle variable between 0º and 70º
Stockpile capacity: 164.5m³ (215.2yd³) @ 40º
Hydraulic Folding Oversize Plus Conveyor
TRANSFER CONVEYOR
Drive: Hydraulic variable speed drive via high torque 315cc motor
Belt width: 500mm (20”)
Belt spec: Plain, EP 500, 3 ply
Belt Speed: 125 mpm (410’ per min)
POWERUNIT AND HYDRAULICS
Tier 3 / Stage IIIA: Caterpillar C4.4
Engine Power: 97kW (130hp)
Engine Speed: 2200 rpm
Tier 4i / Stage IIIB: Caterpillar C4.4
Engine Power: 98kW (131hp) Powerunit
Engine Speed: 2200 rpm
Tier 4F / Stage IV: Caterpillar C4.4
Engine Power: 98kW (131 hp)
Engine Speed: 2200 rpm
Pump 1: Triple 33cc/33cc/26cc
Thefirst section drives either the (left) track or the main conveyor and
transfer conveyor.
The second section drives either the (right) track or split to drive the
middle grade & “oversize minus” conveyor.
The third section drives the belt feeder and oversize plus conveyor
Pump 2: Tandem 46cc/27cc Pump 1: Triple 33cc/rev, 33cc/rev, 26cc/rev
The first section drives the Fines conveyor and screen.
The second section operates the vibrating or tipping grid.

User Friendly Interface

219
 TANK CAPACITIES
Hydraulic Tank: 450 litres / 99 UK gal / 119 US gal
Fuel Tank: 336 litres / 74 UK gal / 88 US gal)
UNDERCARRIAGE
Shoe Width: 500mm (20")
Sprocket Centres: 4.2m (13' 8")
Speed: 0.8 km/h
Gradeability: 32.6°
Raking Angle: 9°

STANDARD FEATURES GENERAL:

ENGINE: Heavy duty undercarriage unit with 500mm wide tracks
Tier 3 / Stage IIIA Caterpillar C4.4 - 4 cylinder diesel engine develop- Control operation of tracks via hand-held set with 5m connection lead
ing 97kW (130hp) @ 2200 rpm with heavy duty square connector
Tier 4i / Stage IIIB - Caterpillar C4.4 - 4 cylinder diesel engine Low level central greasing & emergency stops (4)
developing 98kW (131hp) @ 2200 rpm Safety guards in compliance with machinery directive
Tier 4F / Stage IV - Caterpillar C4.4 - 4 cylinder diesel engine
developing 98kW (131hp) @ 2200 rpm
FEEDER: OPTIONAL EQUIPMENT
Hopper Capacity: 8.0m³ (10.5yd³) - 4.25m (14ft) wide steel lined Opti Drive – 2 x 37kW IE2 electric motors c/w hydraulic gear pumps
hopper and electrical control panel allowing machine to run in either Diesel or
Belt Width: 1.2m (48”) wide variable speed belt feeder Electric mode (IE3 motors required for the USA, please contact factory
for price and availabilty)
Remote control hydraulic tipping reject grid c/w grouser bars 4.25m x
100mm spacing (14’ x 4”) No grid but hopper deadplate fitted

SCREENBOX: Double deck vibrating grid c/w abbrasion resistant plate on wear sur-
face of T Bars top dk and mesh in bottom deck (includes Hopper inlet
6.1m x 1.53m (20’ x 5’) All 3 decks
chute from crusher )
No mesh or speedharps included for any deck (but all mesh
Remote control hydraulic tipping reject grid c/w grouser bars 3.65m
fitting parts included as standard)
x 100mm spacing (12’ 0” x 4”) (includes Hopper inlet chute from
Quick wedge tensioning - top and middle deck Crusher)
Hydraulic tensioning (bottom deck screen mesh) Hydraulic raise of Main Conveyor head-section (For improved mesh
Galvanised access catwalks to both sides and around top of screen access)
Screenbox reject chutes (2nr) (Top deck PE lined) Top deck mesh
MAIN CONVEYOR: Middle deck mesh
Belt Width: 1.2m (48”) plain belt on main conveyor Bottom deck mesh/ speedharp
Skirting on main conveyor Aluminium Rapid-Fit dust covers on main and fines belt
SIDE CONVEYORS: Dust suppression system on fines belt
Belt Width: 800mm (32”) chevron belt on both side conveyors Oversize Plus conveyor c/w 2.2m extension for recirc
Radio Remote control of tracks
OVERSIZE PLUS CONVEYOR:
1nr Standard stockpiler drive - Approx 30 Litres/min (only available
Belt Width: 500mm (20”) chevron belt on oversize plus product
when no vibrating grid fitted)
conveyor
OR Quad Pump option for 1nr dedicated Stockpiler Drive - Approx 70
TRANSFER CONVEYOR: Litres/min
Belt Width: 500mm (20”) plain belt on transfer conveyor Working lights on powerunit and main conveyor
FINES CONVEYOR: Anti-roll back plates for Main conveyor (3nr)
Belt Width: 1.2m (48”) fines belt 68 grade hydraulic oil
Special paint colour (if different from Terex MPE White RAL 1013 or
Finlay Orange RAL 2002). RAL must be specified on order

220
 Main conveyor
u Drive: Hydraulic variable speed drive via high torque
Oversize grade conveyor
u Drive: Hydraulic variable speed drive via high
630cc motor
torque 500cc motor
u Belt width: 1.2m (48”)
u Belt width: 800mm (32”)
u Belt spec: Plain 3 ply belt, EP400
u Belt spec: Chevron EP400, 3 ply
u Hydraulic adjust
u Working Angle: 24°
u Belt Speed: 92 mpm (302’ per min)
u Speed: variable speed, 0 - 125 mpm (410’ per min)
u Steel skirted full length of conveyor
u Hydraulic Folding
u Discharge Height: 4.71m (15’ 5”)
Hopper / Feeder
u Hopper Capacity: 8m³ (10.5yd³)
u Stockpile capacity: 193m³ (252yd³)
u Feed height: 3.67m (12’)
u Feed in width: 4.77m (15’ 8”) (grid wing plates)
u Grid aperture: 100mm (4”)
u 10mm replaceable steel hopper liners
u Drive: Hydraulic variable speed drive via high torque gearbox
u Beltfeeder belt width: 1.2m (48”)
u Belt Spec: Plain EP 630, 4 ply, 6 + 2mm covers.
u Speed: variable, 0 - 16 mpm (0 - 53’ per min)
u Wide mouth opening

Middle grade conveyor

Fines conveyor
u Drive: Hydraulic variable speed drive via high
torque 800cc motor
u Belt width: 1.2m (48”)
u Belt spec: Plain, 3 ply, EP400
u Working Angle: Variable 25° (Max)
u Rosta scraper on head drum
u Speed: Not variable speed, 92 mpm (302’ per min)
u Standard Discharge Height: 5.2m (17’ 1”) Screen box
u Stockpile capacity: 260m³ (340yd³)
u All decks: 6.1m x 1.53m (20’ x 5’)
u Wedge side tensioned Top and Middle Deck mesh Undercarriage Power unit Oversize Plus Coneyor
u Hydraulic end tensioned Bottom deck mesh u Shoe Width: 500mm (20”) u Tier 3 / Stage IIIA: Caterpillar C4.4 u Drive: Hydraulic variable speed drive via high
u Drive: Hydraulic heavy duty 2-Bearing Engine Power: 97kW (130hp) torque 500cc motor
u Sprocket Centres: 4.2m (13’ 8”) Engine Speed: 2200 rpm
u Screen Angle: 18° - 30°, hydraulic adjust u Belt width: 500mm (20”)
u Speed: 0.8 km/h u Tier 4i / Stage IIIB: Caterpillar C4.4
u Screen speed: 1000 rpm u Belt spec: Chevron, EP 315, 3 ply
u Gradeability: 32.6° Engine Power: 98kW (131hp)
u Screen stroke standard: 7.5mm (5/16”) u Working Angle: Variable 22° (Max)
u Raking Angle: 9° Engine Speed: 2200 rpm
u Abrasion resistant material impact plate u Speed: variable speed, 120 mpm (400’ per min)
u Tier 4F / Stage IV: Caterpillar C4.4
u Spreader plate Engine Power: 131hp (98kW) u Discharge Height: Variable 4.8m (Max)
u Galvanised access catwalks on both sides and Engine Speed: 2200 rpm u Stockpile capacity: 164.5m³ (215.2yd³) @40º
top end of screen
u Total screening area: 27.8m² (300ft²)
694+

221
 TRANSPORT DIMENSIONS

19.36m (63’ 6”) 3m (9’ 10”)

3.58m (11’ 9”)

WORKING DIMENSIONS

19.6m (64’ 4”)

7.0m (23’ 1”)

17.9m (58’ 8”)

MACHINE WEIGHT: 39,250kg (86,531lbs)

with tipping grid

For further information on specific machine weight configurations please consult Terex Finlay

222