Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

Pioneer Deh P6000ub

Download as pdf or txt
Download as pdf or txt
You are on page 1of 74

ORDER NO.

CRT4036
DEH-P6000UB/XN/EW5

CD RDS RECEIVER

DEH-P6000UB /XN/EW5

This service manual should be used together with the following manual(s):
Model No. Order No. Mech.Module Remarks

CX-3240 CRT4050 S10.5COMP2-iPod/USB CD Mech. Module : Circuit Descriptions, Mech. Descriptions, Disassembly

For details, refer to "Important Check Points for Good Servicing".

PIONEER CORPORATION 4-1, Meguro 1-chome, Meguro-ku, Tokyo 153-8654, Japan


PIONEER ELECTRONICS (USA) INC. P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A.
PIONEER EUROPE NV Haven 1087, Keetberglaan 1, 9120 Melsele, Belgium
PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 253 Alexandra Road, #04-01, Singapore 159936
PIONEER CORPORATION 2007
K-ZZW. OCT. 2007 Printed in Japan
1 2 3 4

SAFETY INFORMATION
CAUTION
A
This service manual is intended for qualified service technicians; it is not meant for the casual do-it-yourselfe.
Qualified technicians have the necessary test equipment and tools, and have been trained to properly and safely repair
complex products such as those covered by this manual.
Improperly performed repairs can adversely affect the safety and reliability of the product and may void the warranty.
If you are not qualified to perform the repair of this product properly and safely, you should not risk trying to do so
and refer the repair to a qualified service technician.

- Safety Precautions for those who Service this Unit.


When checking or adjusting the emitting power of the laser diode exercise caution in order to get safe, reliable
results.

B Caution:
1. During repair or tests, minimum distance of 13 cm from the focus lens must be kept.
2. During repair or tests, do not view laser beam for 10 seconds or longer.

CAUTION:
USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE
SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.

CLASS 1
LASER PRODUCT
D

WARNING!
The AEL (accessible emission level )of the laser power output is less than CLASS 1
but the laser component is capable of emitting radiation exceeding the limit for
CLASS 1.
A specially instructed person should do servicing operation of the apparatus.

Laser diode characteristics


Wave length : 785 nm to 814 nm
Maximum output : 1 190 W(Emitting period : unlimited)

Additional Laser Caution


Transistors Q101 in PCB drive the laser diodes.
When Q101 is shorted between their terminals, the laser diodes will radiate beam.
F If the top cover is removed with no disc loaded while such short-circuit is continued,
the naked eyes may be exposed to the laser beam.

DEH-P6000UB/XN/EW5
2
1 2 3 4
5 6 7 8

CAUTION
Danger of explosion if battery is incorrectly replaced. A
Replaced only with the same or equivalent type recommended by the manufacture.
Discord used batteries according to the manufacture's instructions.

DEH-P6000UB/XN/EW5
5 6 7 8
3
1 2 3 4

[Important Check Points for Good Servicing]


In this manual, procedures that must be performed during repairs are marked with the below symbol.
Please be sure to confirm and follow these procedures.
A
1. Product safety
Please conform to product regulations (such as safety and radiation regulations), and maintain a safe servicing environment by
following the safety instructions described in this manual.

1 Use specified parts for repair.

Use genuine parts. Be sure to use important parts for safety.

2 Do not perform modifications without proper instructions.

Please follow the specified safety methods when modification(addition/change of parts) is required due to interferences such as
radio/TV interference and foreign noise.

B 3 Make sure the soldering of repaired locations is properly performed.

When you solder while repairing, please be sure that there are no cold solder and other debris.
Soldering should be finished with the proper quantity. (Refer to the example)

4 Make sure the screws are tightly fastened.

Please be sure that all screws are fastened, and that there are no loose screws.

5 Make sure each connectors are correctly inserted.

Please be sure that all connectors are inserted, and that there are no imperfect insertion.

6 Make sure the wiring cables are set to their original state.

Please replace the wiring and cables to the original state after repairs.
C In addition, be sure that there are no pinched wires, etc.

7 Make sure screws and soldering scraps do not remain inside the product.

Please check that neither solder debris nor screws remain inside the product.

8 There should be no semi-broken wires, scratches, melting, etc. on the coating of the power cord.

Damaged power cords may lead to fire accidents, so please be sure that there are no damages.
If you find a damaged power cord, please exchange it with a suitable one.

9 There should be no spark traces or similar marks on the power plug.

When spark traces or similar marks are found on the power supply plug, please check the connection and advise on secure
connections and suitable usage. Please exchange the power cord if necessary.
D a Safe environment should be secured during servicing.

When you perform repairs, please pay attention to static electricity, furniture, household articles, etc. in order to prevent injuries.
Please pay attention to your surroundings and repair safely.

2. Adjustments
To keep the original performance of the products, optimum adjustments and confirmation of characteristics within specification.
Adjustments should be performed in accordance with the procedures/instructions described in this manual.

3. Lubricants, Glues, and Replacement parts


Use grease and adhesives that are equal to the specified substance.
Make sure the proper amount is applied.
E

4. Cleaning
For parts that require cleaning, such as optical pickups, tape deck heads, lenses and mirrors used in projection monitors, proper
cleaning should be performed to restore their performances.

5. Shipping mode and Shipping screws


To protect products from damages or failures during transit, the shipping mode should be set or the shipping screws should be
installed before shipment. Please be sure to follow this method especially if it is specified in this manual.

DEH-P6000UB/XN/EW5
4
1 2 3 4
5 6 7 8

CONTENTS
SAFETY INFORMATION .....................................................................................................................................2
1. SERVICE PRECAUTIONS................................................................................................................................6
1.1 SERVICE PRECAUTIONS .........................................................................................................................6 A
1.2 NOTES ON SOLDERING...........................................................................................................................6
2. SPECIFICATIONS.............................................................................................................................................7
2.1 SPECIFICATIONS ......................................................................................................................................7
2.2 DISC/CONTENT FORMAT.........................................................................................................................8
2.3 PANEL FACILITIES ....................................................................................................................................9
2.4 CONNECTION DIAGRAM........................................................................................................................12
3. BASIC ITEMS FOR SERVICE ........................................................................................................................13
3.1 CHECK POINTS AFTER SERVICING .....................................................................................................13
3.2 PCB LOCATION .......................................................................................................................................13
3.3 JIGS LIST .................................................................................................................................................14
4. BLOCK DIAGRAM ..........................................................................................................................................16
5. DIAGNOSIS ....................................................................................................................................................19 B
5.1 OPERATIONAL FLOWCHART.................................................................................................................19
5.2 ERROR CODE LIST.................................................................................................................................20
5.3 CONNECTOR FUNCTION DESCRIPTION .............................................................................................22
6. SERVICE MODE.............................................................................................................................................23
6.1 CD TEST MODE.......................................................................................................................................23
7. DISASSEMBLY ...............................................................................................................................................25
8. EACH SETTING AND ADJUSTMENT............................................................................................................30
8.1 CD ADJUSTMENT ...................................................................................................................................30
8.2 CHECKING THE GRATING AFTER CHANGING THE PICKUP UNIT ....................................................31
8.3 PCL OUTPUT CONFIRMATION ..............................................................................................................33
9. EXPLODED VIEWS AND PARTS LIST ..........................................................................................................34
C
9.1 PACKING..................................................................................................................................................34
9.2 EXTERIOR(1) ...........................................................................................................................................36
9.3 EXTERIOR(2) ...........................................................................................................................................38
9.4 CD MECHANISM MODULE .....................................................................................................................40
10. SCHEMATIC DIAGRAM................................................................................................................................42
10.1 OVERALL CONNECTION DIAGRAM(GUIDE PAGE)............................................................................42
10.2 KEYBOARD UNIT ..................................................................................................................................48
10.3 CD MECHANISM MODULE(GUIDE PAGE)...........................................................................................50
10.4 WAVEFORMS.........................................................................................................................................56
11. PCB CONNECTION DIAGRAM ....................................................................................................................60
11.1 TUNER AMP UNIT .................................................................................................................................60
11.2 KEYBOARD UNIT...................................................................................................................................64 D
11.3 CD CORE UNIT(S10.5COMP2-iPod) .....................................................................................................66
11.4 PANEL UNIT ...........................................................................................................................................68
12. ELECTRICAL PARTS LIST...........................................................................................................................69

DEH-P6000UB/XN/EW5
5 6 7 8
5
1 2 3 4

1. SERVICE PRECAUTIONS
1.1 SERVICE PRECAUTIONS
A

1. You should conform to the regulations governing


the product (safety, radio and noise, and other
regulations), and should keep the safety during
servicing by following the safety instructions
described in this manual.
2. Before disassembling the unit, be sure to turn off
the power. Unplugging and plugging the connectors
during power-on mode may damage the ICs inside
the unit.
3. To protect the pickup unit from electrostatic discharge
B during servicing, take an appropriate treatment
(shorting-solder) by referring to "the DISASSEMBLY".
4. After replacing the pickup unit, be sure to check the
grating.
5. Be careful in handling ICs. Some ICs such as MOS
type are so fragile that they can be damaged by
electrostatic induction.

1.2 NOTES ON SOLDERING


D

For environmental protection, lead-free solder is used on the printed circuit boards mounted in this unit.
Be sure to use lead-free solder and a soldering iron that can meet specifications for use with lead-free solders for repairs
accompanied by reworking of soldering.

Compared with conventional eutectic solders, lead-free solders have higher melting points, by approximately 40 C.
Therefore, for lead-free soldering, the tip temperature of a soldering iron must be set to around 373 C in general, although
the temperature depends on the heat capacity of the PC board on which reworking is required and the weight of the tip of
the soldering iron.

Compared with eutectic solders, lead-free solders have higher bond strengths but slower wetting times and higher melting
E temperatures (hard to melt/easy to harden).

The following lead-free solders are available as service parts:


Parts numbers of lead-free solder:
GYP1006 1.0 in dia.
GYP1007 0.6 in dia.
GYP1008 0.3 in dia.

DEH-P6000UB/XN/EW5
6
1 2 3 4
5 6 7 8

2. SPECIFICATIONS
2.1 SPECIFICATIONS
A

DEH-P6000UB/XN/EW5
5 6 7 8
7
1 2 3 4

2.2 DISC/CONTENT FORMAT

DEH-P6000UB/XN/EW5
8
1 2 3 4
5 6 7 8

2.3 PANEL FACILITIES

DEH-P6000UB/XN/EW5
5 6 7 8
9
1 2 3 4

DEH-P6000UB/XN/EW5
10
1 2 3 4
5 6 7 8

Fixing the front panel A

If you do not operate the removing and attaching the front panel function, use the supplied
fixing screws and holders to fix the front panel to this unit.
1. Attach the holders to both sides of the front panel.

Holder
CND1249 Holder
CND1250

2. Replace the front panel to the unit.

3. Flip the holders into upright positions.

4. Fix the front panel to the unit using fixing screws.

E
Fixing Screw
BPZ20P060FTB

DEH-P6000UB/XN/EW5
5 6 7 8
11
1 2 3 4

2.4 CONNECTION DIAGRAM

DEH-P6000UB/XN/EW5
12
1 2 3 4
5 6 7 8

3. BASIC ITEMS FOR SERVICE


3.1 CHECK POINTS AFTER SERVICING
A
To keep the product quality after servicing, please confirm following check points.

No. Procedures Item to be confirmed


1 Confirm whether the customer complain has The customer complain must not be
been solved. reappeared.
If the customer complain occurs with the Display, audio and operations must be
specific media, use it for the operation check. normal.
2 CD Play back a CD. No malfunction on display, audio and
(Track search) operation.
3 FM/AM tuner Check FM/AM tuner action. Display, audio and operations must be
(Seek, Preset) normal. B
Switch band to check both FM and AM.
4 Check whether no disc is inside the product. The media used for the operating check must
be ejected.
5 Appearance check No scratches or dirt on its appearance after
receiving it for service.

See the table below for the items to be checked regarding audio:

Item to be checked regarding audio


Distortion
Noise
C
Volume too low
Volume too high
Volume fluctuating
Sound interrupted

3.2 PCB LOCATION


D

C Panel Unit
A Tuner Amp Unit

B Keyboard Unit E

Unit Number : QWM3010


Unit Name : Tuner Amp Unit
Unit Number :
Unit Name : Keyboard Unit
Unit Number : CWM8758
Unit Name : Panel Unit
Unit Number : CWX3526
D CD Core Unit Unit Name : CD Core Unit
(S10.5COMP2-iPod) F
(S10.5COMP2-iPod)

DEH-P6000UB/XN/EW5
5 6 7 8
13
1 2 3 4

3.3 JIGS LIST

A - Jigs List
Name Jig No. Remarks
Test Disc TCD-782 Checking the grating
L.P.F. Checking the grating (Two pieces)

- Grease List
B Name Grease No. Remarks
Grease GEM1024 CD Mechanism Module
Grease GEM1045 CD Mechanism Module

Before shipping out the product, be sure to clean the


C
following portions by using the prescribed cleaning
tools:
Portions to be cleaned Cleaning tools
CD pickup lenses Cleaning liquid : GEM1004
Cleaning paper : GED-008

DEH-P6000UB/XN/EW5
14
1 2 3 4
5 6 7 8

DEH-P6000UB/XN/EW5
5 6 7 8
15
1 2 3 4

4. BLOCK DIAGRAM
A TUNER AMP UNIT
A

VDD

LDET
TUNPDO

TUNPDI
TUNPCK
7 6 13 5 10 9 8 11 14 18 19 20 21

NC

CE2

ROM_VDD

SL

DI
CK
CE1

LDET

DO

RDS_CK

RDS_DATA

RDS_LOCK

RDS_HSLK
FM/AM TUNER UNIT

IC 3 EEPROM IC 5
5.0V 5V t 3.3V

B OSC LPF

ANTENNA ANT401
AM ANT FMRF
1
1 ATT
Rch
2,3 24
IC 2
2.5V
FM ANT IC 1
3 3.3V
ATT Lch
23
FMRF MIXER, IF AMP DET, FM MPX,
RDS DECODER
RF adj
ANT adj

T51 CF52

C
AUDIOGND

IC 4
OSCGND

VDD_3.3
RFGND

3.3V 3.3V t 2.5V 2.5V


DGND

VCC
NC

2 12 15 22 16 4 17 TUNL

CDL

3.3V BUS+L

BUS-L
AUXL
CN101 IP-BUS DRIVER AUXG
IC101
7 BUSL+ HA12241FP
11 BUSL-
IP-BUS 5 BUS- 5 BUS- DIN1 1 TX 28
TX
1 BUS+ 6 BUS+ ROUT 2 RX 27
RX
8 19
STBY
8 RX2 SYSTEM
Q101 8 CONTROLLER
IPPW 52 IC 601(2/2)
BUP IPPW
PEG402A8
46
SYSPW
38 39
CN151 Q102 ASENBO MUTE
D 6
5 AUXL
AUX
4 AUXG
3 KEYD 32 KEYD
WIRE 2 KEYAD 92
KEYAD
REMOTE 1 USB5V
REGULATOR
D CD CORE UNIT(S10.5COMP2-iPod) CN521
1
IC501
BD9781HFP
OELPW
48

BUP VIN
PICKUP UNIT RF-AMP, CD DECODER, 68
MP3/WMA DECODER, AMPPW
(P10.5)(SERVICE) DIGITAL SERVO / DATA PROCESSOR CPU, 1 VBUS 5
VOUT VIN
4 2
5
SW
7 26
VDD2 USB HOST CONTROLLER 6 FB EN SYNC
LASER CN101 IC521 INV
DIODE LD-
15 15 141 USB R5523N001B
LD
Q101 USBXTAL 1 EN 1 22 B
MD 142 USBCTL
X205
5 5 PD
48MHz FLG 3 23
FLG
REFO 133
VREF 8 8 REFOUT /USBXTAL 2 2
D- FLPILM
50
AC,BD,E,F Q102 8
HOLOGRAM 3 D+ EJTIN
UNIT VCC VDD2
DSENS
FOM FOM S801
3 3 CD 39
FOP FOP /PUEN 9
FOCUS ACT. 2 2 DRIVER DSENS ILM
E MONITOR
DIODE TRACKING ACT.
TOP
1 1 TOP CN701 CN701 B
TOM
4 4
TOM IC301 5 DP DP
LD+ BA5839FP IC201 DP 16 4
Q82
14 14 TD,FD
12
FOM
PE5611B DM
4 DM
17 3 DM
11 SD,MD LOUT CDL
FOP 55
14 LOUT 13 7
TOP VDD
13 49
TOM ILMPW
VDD2 VDD 3.3V REGULATOR
SPINDLE
MOTOR M Q201
16 VDD CDVDD 3 IC780 1
SOP 22 28 VDD3 9 11 VDD 36
LOEJ LOEJ NJM2885DL1-33 DIM
15
SOM 21 20
18
LOAD/ CARRIAGE LCOP CLCONT CLCONT
/ADENA
17
MOTOR M 17
LCOM CONT
9 41
CONT 16 /RESET CDRST 21
/RESET 8 12 CDRST VDD

BRST,BRXEN,BSRQ BRST,BRXEN,BSRQ,BDATA,BSCK
47
8 BDATA,BSCK SWVDD
12EJ
7 Q751 VD 7.5V REGULATOR
8EJ VD VD
10 VD 2 18 BUP
DSCSNS
Q752
9
HOME XTAL 50 1 19 33
DPDT
X201
S904 S905 S901 16.93MHz 34
12EJ 8EJ HOME /XTAL 52 KYDT
VD 20
F VDCONT
S903
DSCSNS 91
11 CSENS
VDSENS

iPod CP CPRDY,CPRST
IC205
341S2094 SDA,SCL

DEH-P6000UB/XN/EW5
16
1 2 3 4
5 6 7 8

CN301
SWL
MUTE SWL
BZ601 5
BUZZER
Q303
PEE 24 RCA OUT
CE2 63
TUNPCE2
CE1 64 FL FL
TUNPCE1 6
TUNPDI 66
TUNPDI 13
TUNPDO XIN
67
TUNPDO X601
TUNPCK 65
TUNPCK 11 15.00MHz VDD REGULATOR
Q302 B
LDET 72 XOUT
LDET Q901
SL 95 SL
SYSTEM VDD
CONTROLLER Q902

Rch IC 601(1/2)
24 Q401 PEG402A8
RDSDATA 75 45
RDSSDT DALMON

Lch RDSHSLK 76
RDS57K
23
B SENS CN981
BUP
Q402 16 BUP
BSENS 16
RDSCK 71 B.UP
RCK Q921
73 ACC
ASENS 14
ACC
RDSLOCK 74
RDSSLK ILM SENS
A SENS Q931
51 ILL
ISENS 12
RESET ILL
TEL MUTE
2 IC651 1 10
RESET
VDD 40 TEL
S-80835CNMC-B8U TELIN 9
TEL
Q951
ELECTRONIC VOLUME/ C
SOURCE SELECTOR GND
15
BUP GND

6
POWER AMP 6,20
TUNL
IN2_L
12 VCC 23 FL- FL2
7 FL- 7
CDL Pre/SW_L FL-
IN1_L 21 FL+ FL1
10 14 IC 351 FL+ 5
FL+
BUS+L 3 Front_L FLIN 3 RL- RL2
IN4+_L 11 12
PAL007C RL- 8
BUS-L 4 IC201 Rear_L RLIN 5 RL+ RL1 RL-
IN4-_L PML018A RL+ 6
MUTE STBY B.REM RL+
AUXL 2 IN5+_L 22 4 25 BEM
AUXG 1 11
IN5-_L B.REM

MUTING
Q381
2 SYSTEM VST,VCK,VDT SYS +B REGULATOR
BUP
CONTROLLER 2 IC911 1
IC 601(2/2) VCC
NJM2388F84
BUP
PW RR RR
PEG402A8 - +
4 MUTE
46 BACK FR FR
SYSPW Q351 UP - +
ENBO 39 B. FL FL
MUTE ILM REM - +
GND ACC RL RL D
Q561 E-MUTE - +
Q391
OEL14V
YD Q562 BUP
YAD 6,7 IC561 1
NJM2360M
3.3V REGULATOR
48
OELPW
DC/DC CONVERTER 3 IC431 1
3.3V VCC
NJM2885DL1-33
68
AMPPW

NC
CN801
FILM+
BUP 5 5
BCTL Q801 FILM-
G 6 6
FLPILM

EJTIN
50
8 EJSW
8 8
C PANEL UNIT B KEYBOARD UNIT
DGND S1970
9 9
EJECT CN1801
ENS ILM CONTROL
BUP Q821
E
ILM+ ILM+ ILLUMI
7 7 4 9
Q823 KEY MATRIX
ROTARY COMMANDER
S1906 S1901,S1902,S1904,
S1907,S1909
49
ILMPW 10

1 S1903,S1905,S1908,
S1910
Phase_B
Phase_A

36
DIM Q822
5.1V
X1901
SWVDD 10.000MHz
SWVDD SWVDD 9 19 6 4 18 17 15
RST VDD 2 2 2 11
ROT1

ADKEY2
ROT0

ADKEY1
ADKEY0

Q891
XIN

XOUT

7
VCC
3 16 2 21
47 DOUT SIRX
SWVDD OPT IN IC1901 VREF
1 20
GP1UX51RK 1 10
REM DCLK SCL
Q892 KEY/OEL CONTROLLER 20 19
V1901
REMOTE CONTROL IC1902 XCMD XCMD OEL UNIT
33 DPDT DPDT SENSOR 12 PEG411A NCLK 14
10
XI
DPDT 11 11 10 3 DPDT
11 18
REGS

34 KYDT KYDT 13 XREST XRES


VKH
VDD

VAH

KYDT 14 14 8 5 KYDT

DCONT
OEL14V 10 10 5 8
OEL+B 13 16 7 6 F
91 CSENS 4 CSENS 5.1V
CSENS 4 3 10
CN1951 Q1902
CN1950

DEH-P6000UB/XN/EW5
5 6 7 8
17
1 2 3 4

- FM/AM Tuner Unit


7 6 13 5 10 9 8 11 14 18 19 20 21

RDS_CK

RDS_LOCK
CE2

CE1

RDS_HSLK
CK

LDET
SL

DI

DO
ROM_VDD
NC

RDS_DATA
A

IC 3 EEPROM IC 5
5.0V 5V t 3.3V

OSC LPF

AM ANT FMRF
1 AT T
Rch
24
IC 2
2.5V
FM ANT IC 1
3 3.3V
AT T Lch
B 23
FMRF MIXER, IF AM P DET, FM MPX,
RDS DECODER
RF adj
ANT adj

T51 CF52
AUDIOGND

IC 4
OSCGND

VDD_3.3
RFGND

3.3V 3.3V t 2.5V 2.5V


DGND

VCC
NC

2 12 15 22 16 4 17

C No. Symbol I/O Explain


1 AMANT I AM antenna input AM antenna input high impedance AMANT pin is connected with
an all antenna by way of 4.7 µH. (LAU type inductor) A series circuit
including an inductor and a resistor is connected with RF ground for
the countermeasure against the hum of power transmission line.
2 RFGND RF ground Ground of antenna block
3 FMANT I FM antenna input Input of FM antenna 75 Surge absorber(DSP-201M-S00B)is necessary.
4 VCC power supply The power supply for analog block. D.C 8.4 V ± 0.3 V
5 SL O signal level Output of FM/AM signals level
6 CE2 I chip enable-2 Chip enable for EEPROM ”Low” active
7 NC non connection Not used
8 CE1 I chip enable-1 Chip enable for AF•RF ”High” active
D
9 CK I clock Clock
10 DI I data in Data input
11 LDET O lock detector “Low” active
12 OSCGND osc ground Ground of oscillator block
13 ROM_VDD power supply Power supply for EEPROM pin 13 is connected with a power supply of
micro computer.
14 DO O data out Data output
15 DGND digital ground Ground of digital block
16 NC non connection Not used
17 VDD_3.3 power supply The power supply for digital block. 3.3 V ± 0.2 V
18 RDS_CK O RDS clock Output of RDS clock(2.5 V)
E 19 RDS_DATA O RDS data Output of RDS data(2.5 V)
20 RDS_LOCK O RDS lock Output unit “High” active(2.5 V) (RDS_LOCK turns over by the
external transistor . “Low” active)
21 RDS_HSLK O RDS high speed Output unit “High” active(2.5 V)(RDS_HSLK turns over by the
lock external transistor. “Low” active)
22 AUDIOGND audio ground Ground of audio block
23 L ch O L channel output FM stereo “L-ch” signal output or AM audio output
24 R ch O R channel output FM stereo “R-ch” signal output or AM audio output

DEH-P6000UB/XN/EW5
18
1 2 3 4
5 6 7 8

5. DIAGNOSIS
5.1 OPERATIONAL FLOWCHART
A
Power ON

Vcc = 5 V
Pin14

BSENS
Pin16
BSENS = L B

ASENS
Pin73

ASENS = L

DSENS
Pin9
DSENS = L
C
ASENBO<-H
Pin38

CSENS
Pin91 - 2 V < CSENS < 3 V
Last source returns.
2 V < CSENS < 3 V CD loading functions are available.
Keys except for EJECT key are not available.
Starts
communication
with Grille D
microcomputer.

300 ms
SWVDD<-H
Pin47
300 ms
In case of the above signal, the communication
Source keys
with Grille microcomputer may fail.
operative
If the time interval is not 300 msec, the oscillator
may be defective.
E
Source ON

SYSPW<-H
Pin46

Completes power-on operation.


(After that, proceed to each source operation)

DEH-P6000UB/XN/EW5
5 6 7 8
19
1 2 3 4

5.2 ERROR CODE LIST


- CD Error Messages
A If a CD is not operative or stopped during operation due to an error, the error mode is turned on and cause(s) of
the error is indicated with a corresponding number. This arrangement is intended at reducing nonsense calls from
the users and also for facilitating trouble analysis and repair work in servicing.

(1) Basic Indication Method


1) When SERRORM is selected for the CSMOD (CD mode area for the system), error codes are written to DMIN
(minutes display area) and DSEC (seconds display area). The same data is written to DMIN and DSEC. DTNO
remains in blank as before.

2) Head unit display examples


B
Depending on display capability of LCD used, display will vary as shown below. xx contains the error number.

8-digit display 6-digit display 4-digit display


ERROR-xx ERR-xx E-xx

(2) Error Code List


Code Class Displayed error code Description of the code and potential cause(s)
10 Electricity Carriage Home NG CRG can't be moved to inner diameter.
SERVO LSI Com- CRG can't be moved from inner diameter.
C munication Error → Failure on home switch or CRG move mechanism.
Communication error between microcomputer and SERVO LSI.
11 Electricity Focus Servo NG Focusing not available.
→ Stains on rear side of disc or excessive vibrations on REWRITABLE.
12 Electricity Spindle Lock NG Spindle not locked. Sub-code is strange (not readable).
Subcode NG → Failure on spindle, stains or damages on disc, or excessive vibrations.
A disc not containing CD-R data is found.
Turned over disc are found, though rarely.
CD signal error.
17 Electricity Setup NG AGC protection doesn't work. Focus can be easily lost.
D
→ Damages or stains on disc, or excessive vibrations on REWRITABLE.
30 Electricity Search Time Out Failed to reach target address.
→ CRG tracking error or damages on disc.
44 Electricity ALL Skip Skip setting for all track.
(CD-R/RW)
50 Mechanism CD On Mech Error Mechanical error during CD ON.
→ Defective loading motor, mechanical lock and mechanical sensor.
A0 System Power Supply NG Power (VD) is ground faulted.
→ Failure on SW transistor or power supply (failure on connector).
E Remarks: Mechanical errors are not displayed (because a CD is turned off in these errors).
Unreadable TOC does not constitute an error. An intended operation continues in this case.
Upper digits of an error code are subdivided as shown below:
1x: Setup relevant errors, 3x: Search relevant errors, Ax: Other errors.

DEH-P6000UB/XN/EW5
20
1 2 3 4
5 6 7 8

iPod error
Message Cause Action
A
NO SONGS No songs in the iPod Transfer the songs to the iPod.
STOP No songs in the current list Select a list that contains the songs.
Disconnect the cable from the iPod. Once the iPod
ERROR-11 Communication failure main menu is displayed, connect the cable again.
Reset the iPod.
ERROR-21 Old version of the iPod Update the iPod version.
ERROR-30 iPod failure Reset the iPod.

iPod is not charged but operates Check if the connection cable for the iPod shorted out.
ERROR-A0 After checking, switch the ignition key or disconnect the B
correctly.
iPod and connect again.

USB error
Message Cause Action
No songs in the USB device Transfer the songs to the USB device.
NO AUDIO USB memory with security enabled is Follow the USB memory instructions to disable the
connected security.
The connected USB device contains
TRK SKIPPED Play an audio file not protected by DRM.
WMA files that are protected by DRM C

All the files in the USB device are Transfer the songs not protected by DRM to the USB
PROTECT
protected by DRM device.
The connected USB device is not Connect a USB device that is compliant as a Mass
N/A USB
supported by this unit Storage Class.
The USB connector or the USB cable is
Confirm the USB connector or the USB cable.
short-circuited
CHK USB The connected USB device consumes
more than 500 mA Confirm the USB device.
(max. allowable current)
D
Selected m3u playlist cannot be played
back
N/A PLAYLIST Select another playlist.
All the files on the selected m3u playlist
are protected by DRM

DEH-P6000UB/XN/EW5
5 6 7 8
21
1 2 3 4

5.3 CONNECTOR FUNCTION DESCRIPTION

1. BUS+
A
2. GND
IP-BUS INPUT
3. GND
4. NC
5. BUS- 8 9 10 11
6. GND 5 6 7

7. BUS L+ 1 2 3 4
8. ASENB
9. BUS R+
SUBWOOFER FRONT 10. BUS R-
OUTPUT OUTPUT 11. BUS L- USB AUX IN

AUX IN

W/R

ANTENNA WIRED REMOTE INPUT

1 3 5 7 9 11 13 15

2 4 6 8 10 12 14 16

1 FR+ 9 MUTE
2 RR+ 10 NC
3 FR- 11 B.REM
4 RR- 12 ILM
D 5 FL+ 13 NC
6 RL+ 14 ACC
7 FL- 15 GND
8 RL- 16 B.UP

DEH-P6000UB/XN/EW5
22
1 2 3 4
5 6 7 8

6. SERVICE MODE
6.1 CD TEST MODE
A
During pressing the "SOURCE" and "RPT" keys simultaneously, perform the reset-start, then turn ON
the CD to enter the CDS test mode.

• How to issue the 1 - 6 keys in the 08 model's slave test:


The specification of the 08 model does not include the 1 - 6 keys issuance function for H/U and the remote control unit.
Therefore, in order to issue commands in a slave test, use the direct FUNCTION keys alternatively to enable the equal
key command sending function to the existing models.

Outline) Use the direct FUNCTION keys to display, select, or issue the KEY 1 - 6.

<Direct FUNCTION keys and corresponding functions> B


Direct FUNCTION key Normal mode Slave test mode
A S.Rtrv Selecting a key command
B RDM Issuing a key command
C RPT Switching a screen

• For convenience, a name of each direct FUNCTION key is shown as "A", "B", and "C".

• How to issue the 1 - 6 keys for the CDS source:


(The areas below are overwritten and displayed on character strings for the normal mode display.)

1 During the slave test mode, the key name "K1" is shown at the left by default. C
In this condition, press the A key to toggle K1 - K6, and select a command to be sent to the slave.

C O M P A C T D I S C
K 1 ! T - ! ! ! ! ! ! • The one-line model shows only the bottom
FOLDER TRK MINUTE SECOND column.

A key

C O M P A C T D I S C
K 6 ! T - ! ! ! ! ! ! D

2 During the K1 - K6 key names are displayed, press the B key and issue the selected command.

C O M P A C T D I S C Send a key command selected


K 1 ! T - ! ! ! ! ! ! by pressing the KEY 1.
B key

3 Press the C key to change display/non-display of key names. E

When the non-display mode is selected for the K1 - K6 key names, "A key" and "B key" are invalid.

C O M P A C T D I S C
K 1 ! T - ! ! ! ! ! !

C key

C O M P A C T D I S C
F - ! ! T - ! ! ! ! ! ! • Pressing the A key or B key does not work.

DEH-P6000UB/XN/EW5
5 6 7 8
23
1 2 3 4

- Flow Chart
[Key] [SOURCE] + [RPT] +
BU + ACC
Contents Test Mode In

A Display

[CD] or [SOURCE]
Source On

TRK MIN SEC

[BAND] [3] [2] [4]


Power On Power On RF AMP *1 SPINDLE *9
(T.Offset is adjusted) (T.Offset is not adjusted) Gain switching Speed switching
TRK MIN SEC TRK MIN SEC TRK MIN SEC TRK MIN SEC
00 00 00 99 99 99 GG GG GG SP SP SP

[BAND] [3] [6] [1] [>] [<] [2]


[5]
Power Off Focus Close Focus Mode switching Tracking Servo CRG + CRG - Self-adjusting
B Gop Mode *10
S curve check *2 Close *8 *8 switching *3
Gop Mode switching
TRK MIN SEC TRK MIN SEC TRK MIN SEC 00 00 00 00 00 00 00 00 00 TRK MIN SEC
TRK MIN SEC
91 91 91 0X 0X 0X or 99 99 99 or 99 99 99 or 99 99 99 ?? ?? ??
OL OL OL

[BAND] [1] [6] [3] [>] [<] [2]


Power Off T.Close & AGC T.Close RF AGC / CRG + CRG - T.Balance adjustment /
Applicable servomechanism Applicable servomechanism RF AGC coefficient display T.BAL coefficient display
TRK MIN SEC TRK MIN SEC TRK MIN SEC TRK MIN SEC 8X 8X 8X 8X 8X 8X TRK MIN SEC
?tr ?min ?sec ?tr ?min ?sec ?? ?? ?? or 9X 9X 9X or 9X 9X 9X ?? ?? ??

[BAND] [1] [3] [6] [>] [<] [2]


Power Off F,T,RF AGC*7 F,T AGC / F.Bias CRG/TR jump CRG/TR Jump + CRG/TR Jump - Tracking Open
F.Bias display switching RF AGC value switching*5 *4 *4
TRK MIN SEC TRK MIN SEC TRK MIN SEC TRK MIN SEC TRK MIN SEC TRK MIN SEC 8X 8X 8X
?? ?? ?? ?tr ?min ?sec ?tr ?min ?sec ?tr ?min ?sec ?tr ?min ?sec or 9X 9X 9X
C *6

[BAND] [2]
Power Off Tracking Open

TRK MIN SEC 8X 8X 8X


or 9X 9X 9X

*1) TYP → + 6 dB → + 12 dB Operation


TRK MIN SEC TRK
06MIN06SEC06 TRK
12MIN12SEC12 [Key] Test Mode
[BAND] Power On/Off
[>] CRG + / TR Jump +
*2) Focus Close → S.Curve → F EQ measurement setting (Direction of the external surface)
TRK
00MIN00SEC00 TRK
01MIN01SEC01 TRK
02MIN02SEC02 [<] CRG - / TR Jump -
D (TRK99MIN99SEC99) (Direction of the internal surface)
[1] T. CLS & AGC & Applicable servomechanism /
AGC,AGC display setting
*3) F.Offset Display → RF.Offset → T.Offset Display → Switch to the [2] RF Gain switching / Offset adjustment display /
order of the original display
T.Balance adjustment / T. Open
[3] F. Close,S Curve / Rough Servo and RF AGC /
*4) 1TR/4TR/10TR/32TR/100TR F,T,RF AGC
*5) Single → 4TR → 10TR → 32TR → 100TR → CRG Move [4] SPDL 1X/2X switching
9x(8x):91(81) 92(82) 93(83) 94(84) 95(85) 96(86) As for the double speed(2x), audio output cannot be
supported.
*6) Only at the time of CRG move, 100TR jump [5] Error Rate measurement
ON : ERR 30Counts Start
BER display data[%]
*7) TRK/MIN/SEC → F.AGC → T.AGC Gain → F Bias → RF AGC
E [6] F. Mode switching / Tracking Close / CRG•TR
Jump Switching
*8) CRG motor voltage = 2 [V]

*9) TYP (1X) → 2X → 1X *10) OFF(TYP) → FORCUS → TRACKING


TRK MIN SEC TRK
22MIN22SEC22 TRK
11MIN11SEC11 TRK MIN SEC TRK
70MIN70SEC70 TRK
71MIN71SEC71

• As for the double speed (2x), audio output cannot be supported


• After the [Eject] key is pressed keys other than the [Eject] key should not be pressed, until disc ejection is complete.
• When the key [2] or [3] is pressed during the Focus Search, the power supply should be immediately turned off (otherwise the lens
sticks to Wall, causing the actuator to be damaged).
F • In the case of TR jump other than to 100TR, the function shall continue to be processed even if the TR jump key is released. As for
the CRG Move and 100TR Jump, the mechanism shall be set to the Tracking Close mode when the key is released.
• When the power is turned on/off the jump mode is reset to the Single TR (91) while the gain of the RFAMP is reset to 0 dB. At the
same time all the self-adjusting values shall return to the default setting.

DEH-P6000UB/XN/EW5
24
1 2 3 4
5 6 7 8

7. DISASSEMBLY
*NOTE) While the photograph shown is slightly different from this model in shape, the disassembly A
procedure is the same.

- Removing the Keyboard Unit (Fig.1,2,3)

Pull arrow direction


and remove Detach Grille Assy.(Fig.1)

Fig.1
Remove the Knob Unit.(Fig.2)
B
Detach Grille Assy
Knob Unit
Fig.2

1 Remove the four screws.(Fig.3)


1
1
Remove the Cover
and then remove the Keyboard Unit. 1 1
Fig.3
Cover
Cover
C

- Removing the Holder (Fig.4)


Take off the pick of left and right
and then a holder slide to the arrow course.

Fig.4

Holder Pick

D
- Removing the Case and Panel (Fig.5)

Remove the Case and Panel.

Case

Panel Fig.5

DEH-P6000UB/XN/EW5
5 6 7 8
25
1 2 3 4

- Removing the CD Mechanism Module (Fig.6)

A Remove the four screws.


1 1

1
Disconnect the cable
and then remove the CD Mechanism Module.

1
B
1

Fig.6

CD Mechanism Module

- Removing the Panel AssyFig.7,8)

1 1
C
1 Remove the two screws.(Fig.7)
Fig.7

Panel Assy

Push the place of the arrows


and then remove Panel Assy.(Fig.7,8)

Fig.8

- Removing the Panel Unit(Fig.9,10)

1 Remove the two screws.(Fig.9)


E
1
1
Fig.9
Holder Panel Unit
Remove the Holder
and then remove Panel Unit.(Fig.10)

Fig.10
F

DEH-P6000UB/XN/EW5
26
1 2 3 4
5 6 7 8

- Removing the Tuner amp Unit(Fig.11,12)

A
1 Remove the three screws.(Fig.11)
2 2
1 1
2 Remove the two screws.(Fig.11)
1
Fig.11

Tuner amp Unit

B
Straighten the tabs at four locations
3
indicated.(Fig.12) 3 3 3

4 Remove the screw


and then remove the Tuner amp Unit.(Fig.12)

4
3
C

Fig.12

DEH-P6000UB/XN/EW5
5 6 7 8
27
1 2 3 4

- How to hold the Mechanism Unit


1. Hold the Upper and Lower Frames.
2. Do not hold the front portion of the Upper
A Frame, because it is not very solid.

Do not squeeze this area.

- Removing the Upper and Lower Frames


1. With a disc inserted and clamped in the
mechanism, remove the two Springs (A),
the six Springs (B), and the four Screws.
2. Turn the Upper Frame using the part "a" as
C a pivot, and remove the Upper Frame.
3. While lifting the Carriage Mechanism, a
remove it from the three Dampers. B Upper Frame
Caution: When assembling, be sure to apply B
some alcohol to the Dampers and assemble
the mechanism in a clamped state.

B
B

Damper
A
Carriage Mechanism
E
Damper
Lower Frame

DEH-P6000UB/XN/EW5
28
1 2 3 4
5 6 7 8

- How to remove the CD Core Unit


1. Apply Shorting Solder to the flexible cable of
the Pickup, and disconnect it from the Shorting Solder
connector. A
2. Unsolder the four leads, and loosen the
Screw.
3. Remove the CD Core Unit.
Caution: When assembling the CD Core Unit,
assemble it with the SW in a clamped state
so as not to damage it.

Screw
B

CD Core Unit

Solder

- How to remove the Pickup Unit


1. Make the system in the carriage mechanism mode, and have it clamped.
2. Remove the CD Core Unit and remove the leads from the Inner Holder.
3. Remove the Poly Washer, Change Arm, and Pickup Lock Arm. C

4. While releasing from the hook of the Inner Holder, lift the end of the Feed Screw.
Caution: When assembling, move the Planet Gear to the load/eject position before setting the Feed Screw in the Inner
Holder.
Assemble the sub unit side of the Pickup, taking the plate (Chassis) in-between. When treating the leads of the Load
Carriage Motor Assy, do not make them loose over the Feed Screw.

Poly Washer
Change Arm

Inner Holder
Pickup Lock Arm
D

Feed Screw

Planet Gear

Pickup Rack E

Chassis

Pickup F

DEH-P6000UB/XN/EW5
5 6 7 8
29
1 2 3 4

8. EACH SETTING AND ADJUSTMENT


8.1 CD ADJUSTMENT
A

1) Cautions on adjustments 2) Test mode


In this product the single voltage (3.3 V) is used for the This mode is used to adjust the CD mechanism module.
regulator. The reference voltage is the REFO1 (1.65 V) To enter the test mode.
instead of the GND. While pressing the 4 and 6 keys at the same time, reset.
If you should mistakenly short the REFO1 with the GND To exit from the test mode.
during adjustment, accurate voltage will not be obtained, Turn off the ACC and back up.
and the servo’s misoperation will apply excessive shock
to the pickup. To avoid such problems: Notes:
a. Do not mix up the REFO1 with the GND when a. During ejection, do not press any other keys than the
connecting the (-) probe of measuring instruments. EJECT key until the loaded disc is ejected.
B Especially on an oscilloscope, avoid connecting the (-) b. If you have pressed the (→) key or (←) key during focus
probe for CH1 to the GND. search, turn off the power immediately to protect the
b. In many cases, measuring instruments have the same actuator from damage caused by the lens stuck.
potential as that for the (-) probe. Be sure to set the c. For the TR jump modes except 100TR, the track jump
measuring instruments to the floating state. operation will continue even if the key is released.
c. If you have mistakenly connected the REFO1 to the GND, d. For the CRG move and 100TR jump modes, the tracking
turn off the regulator or the power immediately. loop will be closed at the same time when the key is
released.
Before mounting and removing filters or leads for e. When the power is turned off and on, the jump mode
adjustment, be sure to turn off the regulator. is reset to the singleTR (91), the RF amp gain is set to 0 dB,
and the auto-adjustment values are reset to the default
For stable circuit operation, keep the mechanism settings.
C operating for about one minute or more after the
regulator is turned on.

In the test mode, any software protections will not


work. Avoid applying any mechanical or electrical
shock to the mechanism during adjustment.

The RFI and RFO signals with a wide frequency range


are easy to oscillate. When observing the signals,
insert a resistor of 1k ohms in series.

The load and eject operation is not guarantied with the


D mechanism upside down. If the mechanism is blocked
due to mistaken eject operation, reset the product or
turn off and on the ACC to restore it.

DEH-P6000UB/XN/EW5
30
1 2 3 4
5 6 7 8

8.2 CHECKING THE GRATING AFTER CHANGING THE PICKUP UNIT

Note :
The grating angle of the PU unit cannot be adjusted after the PU unit is changed. The PU unit in the CD mechanism
module is adjusted on the production line to match the CD mechanism module and is thus the best adjusted PU
unit for the CD mechanism module. Changing the PU unit is thus best considered as a last resort. However, if the
PU unit must be changed, the grating should be checked using the procedure below.

Purpose :
To check that the grating is within an acceptable range when the PU unit is changed.

Symptoms of Mal-adjustment : B
If the grating is off by a large amount symptoms such as being unable to close tracking, being unable to perform
track search operations, or taking a long time for track searching.

Method :
Measuring Equipment Oscilloscope, Two L.P.F.
Measuring Points E, F, REFO1
Disc TCD-782
Mode TEST MODE

CD Core Unit(S10.5COMP2-iPod)
C
REFO1

E F L.P.F.

Xch Ych
E 100 kohm
Oscilloscope
VREF 390 pF

F 100 kohm

VREF 390 pF

L.P.F. D

Checking Procedure
1. In test mode, load the disc and switch the 3 V regulator on.
2. Using the → and ← buttons, move the PU unit to the innermost track.
3. Press key 3 to close focus, the display should read "91". Press key 2 to implement the tracking balance
adjustment the display should now read "81". Press key 3. The display will change, returning to "81" on the
fourth press.
4. As shown in the diagram above, monitor the LPF outputs using the oscilloscope and check that the phase E
difference is within 75 degrees. Refer to the photographs supplied to determine the phase angle.
5. If the phase difference is determined to be greater than 75 degrees try changing the PU unit to see if there is any
improvement. If, after trying this a number of times, the grating angle does not become less than 75 degrees then the
mechanism should be judged to be at fault.
Note
Because of eccentricity in the disc and a slight misalignment of the clamping center the grating waveform may be
seen to "wobble" ( the phase difference changes as the disc rotates). The angle specified above indicates the
average angle.
Hint
Reloading the disc changes the clamp position and may decrease the "wobble".

DEH-P6000UB/XN/EW5
5 6 7 8
31
1 2 3 4

Grating waveform Ech -> Xch 20 mV/div, AC


Fch -> Ych 20 mV/div, AC
A

0 degrees 30 degrees

45 degrees 60 degrees

75 degrees 90 degrees

DEH-P6000UB/XN/EW5
32
1 2 3 4
5 6 7 8

8.3 PCL OUTPUT CONFIRMATION

- PCL output
In the normal operation mode (with the detachable panel installed, the ACC switched ON, the standby mode
cancelled), shift the TESTIN IC601(Pin 61) terminal to H.
The clock signal is output from the PCL terminal IC601(Pin 37).
The frequency of the clock signal is 468 750 Hz that is one 32th of the fundamental frequency.

DEH-P6000UB/XN/EW5
5 6 7 8
33
1 2 3 4

9. EXPLODED VIEWS AND PARTS LIST


NOTES : Parts marked by " * " are generally unavailable because they are not in our Master Spare Parts List.
The > mark found on some component parts indicates the importance of the safety factor of the part.
A
Therefore, when replacing, be sure to use parts of identical designation.
"
Screw adjacent to mark on the product are used for disassembly.
For the applying amount of lubricants or glue, follow the instructions in this manual.
(In the case of no amount instructions,apply as you think it appropriate.)
9.1 PACKING

DEH-P6000UB/XN/EW5
34
1 2 3 4
5 6 7 8

PACKING SECTION PARTS LIST


Mark No. Description Part No. Mark No. Description Part No.

1 Cord Assy CDP1040 16 Polyethylene Bag CEG1160


2 ••••• 17 Holder(L) CND1249
A
3 Polyethylene Bag CEG1227 18 Holder(R) CND1250
* 4 Battery CEX1065 19 Handle CND3707
5 Remote Control Assy CXC8885 20 Bush CNV3930

6 Unit Box QHG3001 21 Protector XHP7016


7 Contain Box QHL3001 22 Protector XHP7017
8 Cord Assy XDP7003 23 Case Assy QXA3049
9 Accessory Assy XEA7011 * 24-1 Caution Card QRP3001
10 Screw Assy CEA5317 * 24-2 Warranty Card CRY1265

11 Screw BPZ20P060FTB 24-3 Owner's Manual QRD3001 B


12 Screw CBA1650 24-4 Owner's Manual QRD3002
* 13 Polyethylene Bag CEG-127 24-5 Owner's Manual QRD3003
14 Screw CRZ50P090FTC 24-6 Owner's Manual QRB3006
15 Screw TRZ50P080FTC 24-7 Installation Manual QRD3005

Owner's Manual,Installation Manual


Part No. Language

QRD3001 English, Spanish


C
QRD3002 German, French

QRD3003 Italian, Dutch

QRB3006 Russian

QRD3005 English, Spanish, German, French, Italian, Dutch, Russian

DEH-P6000UB/XN/EW5
5 6 7 8
35
1 2 3 4

9.2 EXTERIOR(1)

B
C

A
B
E

DEH-P6000UB/XN/EW5
36
1 2 3 4
5 6 7 8

EXTERIOR(1) SECTION PARTS LIST


Mark No. Description Part No.
1 Screw BSZ26P060FTC
2 Screw BSZ30P060FTC A
3 Screw BSZ30P200FTC
4 Cord Assy CDE8351
5 Earth Plate CNC8915

6 Cushion CNM8890
7 CD Mechanism Module(S10.5) CXK5770
8 Cable QDE3001
9 Tuner Amp Unit QWM3010
10 Screw BPZ26P070FTC

11 Screw BSZ26P060FTC B
12 Screw BSZ26P200FTC
> 13 Fuse(10 A) YEK5001
14 Plug(CN981) CKM1376
15 Plug(CN801) CKS3537

16 Connector(CN701) CKS3833
17 Connector(CN101) CKS5271
18 Antenna Jack(ANT401) CKX1056
19 FM/AM Tuner Unit CWE2097
20 Holder CND4324
C

21 Plug(CN521) KM200NA5L
22 Holder QNC3003
23 Pin Jack(CN301) CKB1051
24 Jack(CN151) XKS7005
25 Holder XNC7030

26 Insulator XNM7031
27 Heat Sink YNR5031
28 Chassis Unit QXA3013
29 Insulator XNM7106 D
30 Insulator CNN2339

31 IC(IC351) PAL007C
32 IC(IC911) NJM2388F84
33 Transistor(Q751,Q901) 2SD2396
34 Choke Coil(L981) CTH1280

DEH-P6000UB/XN/EW5
5 6 7 8
37
1 2 3 4

9.3 EXTERIOR(2)

A A

B
E
C

B
F

DEH-P6000UB/XN/EW5
38
1 2 3 4
5 6 7 8

EXTERIOR(2) SECTION PARTS LIST


Mark No. Description Part No. Mark No. Description Part No.

1 Screw BMZ30P040FTB 50 Cord Assy XDP7003


2 Holder CND3598 A
3 Remote Control Assy CXC8885 51 Case YNB5014
4 Cover CNS7068 52 IC(IC1901) GP1UX51RK
5 Panel QNS3004 53 Sub Panel Assy QXA3025

6 Detach Grille Assy QXA3001


7 Screw BPZ20P080FTB
8 Button(SRC, BAND) QAC3004
9 Button(LIST) QAC3005
10 Button(OPEN) QAC3007

11 Button(MUTE, TA) QAC3006 B


12 Cover QNS3002
13 Lighting Conductor QNV3001
14 Connector(CN1901) CKS5207
15 Double Side Tape CNN1878

16 Holder CNV9735
17 Cap CKX-003
18 OLED MXS8249
19 Spacer QNM3006
20 Holder XNC7028
C

21 Knob Unit QXA3006


22 Spring XBL7005
23 Grille Unit QXA3007
24 Button Unit(DISP, RDM, S.Rtrv, RPT) QXA3010
25 Spring XBH7001

26 Button(EJECT) CAC7752
27 Screw(M2 x 4) CBA1649
28 Screw(M2 x 4.5) CBA1925
29 Washer CBF1038 D
30 Spring CBH2650

31 Spring CBH2651
32 Spring CBH2652
33 Spring CBH2653
34 Holder CND1254
35 Gear CNV5997

36 Arm CNV7400
37 Arm CNV7401
38 Arm CNV7402 E
39 Arm CNV7403
40 Panel Unit CWM8758

41 Connector(CN1951) CKS4806
42 Connector(CN1950) CKS5192
43 Holder Unit CXB9501
44 Holder Unit CXB9502
45 Damper Unit CXB9503

46 Panel Unit QXA3036


F
47 Sub Spring Assy XXA7363
48 Spring CBL1512
49 Pin CNV6486

DEH-P6000UB/XN/EW5
5 6 7 8
39
1 2 3 4

9.4 CD MECHANISM MODULE


5
19
A
27
5
19 5

(1)

19

29 A
13 48 20
5
19 57
(1)
B
B
66 16
13
(1)

9 25
54
44 (1)
23
31 C
44 9 (2)

15 58
73
72
60
8 69 21
(2)

C 46 71 70
38 33
39 62
70 7
68 63
50
40 4
36 (2) (1)
28 (1)
B
32 (1)
52 53
(1) 4
(2) 47 (1) (2)
18 17 35
(1)
37 45 C
61
14 6
41 12
(1)
D 5 49 A
8 64 (2)

(1)
51 65
D
55 (2)
(1)

51 59
(1)

43 10
D (1)
E
74 56
D (2)
1
(1)
3 22
2
34 (1)
E
(1)
19 (1) (1)

26
11
42
24 (1)

(1)

(1)
30
19
67
F 24 E
(1) : GEM1024
(2) : GEM1045

DEH-P6000UB/XN/EW5
40
1 2 3 4
5 6 7 8

CD MECHANISM MODULE SECTION PARTS LIST


Mark No. Description Part No. Mark No. Description Part No.

1 CD Core Unit(S10.5COMP2-iPod) CWX3526 49 Arm CNV7805


A
2 Connector(CN101) CKS4182 50 Rack CNV8342
3 Connector(CN701) CKS4186
4 Screw BMZ20P025FTC 51 Roller CNV8343
5 Screw BSZ20P040FTC 52 Holder CNV8344
53 Arm CNV8345
6 Screw(M2 x 3) CBA1511 54 Guide CNV9498
7 Screw(M2 x 4) CBA1835 55 Arm CNV8348
8 Washer CBF1038
9 Roller CNV9499 56 Arm CNV8349
10 Spring CBH2609 57 Arm CNV8350
58 Clamper CNV8365 B
11 Spring CBH2612 59 Arm CNV8386
12 Spring CBH2614 60 Guide CNV8396
13 Spring CBH2616
14 Spring CBH2617 61 Arm CNV8413
15 Spring CBH2620 62 Collar CNV8938
63 Motor Unit(M2) CXC4026
16 Spring CBH2855 64 Arm Unit CXC4027
17 Spring CBH2937 65 Chassis Unit CXC4028
18 Spring CBH2735
19 Spring CBH2854 66 Gear Unit CXC4029
67 Frame Unit CXC4031 C
20 Spring CBH2642
68 Motor Unit(M1) CXC7134
21 Spring CBH2856 69 Screw Unit CXC6359
22 Spring CBH2857 70 Screw JFZ20P020FTC
23 Spring CBH2860
24 Spring CBH2861 71 Screw JGZ17P022FTC
25 Spring CBL1686 72 Washer YE20FTC
73 Pickup Unit(P10.5)(Service) CXX1942
26 Arm CND1909 74 Screw IMS26P030FTC
27 Frame CND2582
28 Bracket CND2583
D
29 Arm CND3831
30 Lever CND2585

31 Arm CND2586
32 Bracket CND2587
33 Arm CND2588
34 Lever CND2589
35 Holder CNV7201

36 Gear CNV7207
37 Gear CNV7208 E
38 Gear CNV7209
39 Gear CNV7210
40 Gear CNV7211

41 Gear CNV7212
42 Rack CNV7214
43 Arm CNV7216
44 Roller CNV7218
45 Gear CNV7219

F
46 Guide CNV7361
47 Gear CNV7595
48 Guide CNV7799

DEH-P6000UB/XN/EW5
5 6 7 8
41
1 2 3 4

10. SCHEMATIC DIAGRAM


10.1 OVERALL CONNECTION DIAGRAM(GUIDE PAGE)
A Note: When ordering service parts, be sure to refer to " EXPLODED VIEWS AND PARTS LIST" or
"ELECTRICAL PARTS LIST".

A-a A-b
Large size
SCH diagram
A-a
: The power supply is shown with the marked box.

FM : -20dBs

CDR

VCK
AUXR

TUNR

VDT
VST
ASENBO
BUSR+

BUSR+
BUSL+
BUSR-

BUSR-
BUSL-
AM : -20dBs IP-BUS : 2.2dBs

BUS+

BUS-
TUNR

R+
CN101

L+

R-

1K
1K
1K
L-

R22
TUNL

1
A-a

10
11
A-b

5
6
7
8
9
3
4
2
Guide page

R201
R202
R203
VDD
5.2V

C201

C202

C203

C204

C205
RDS

BGND
BUS+

BUS-
R109 1K

14V
R+
L+

R-
L-
IPBUS

8
7
6
5
R110 22K
TUNER R105
A GND

R408

22K
R111 180
62

R104

R106
R112 2R2K

2
3
4
1

100

100
RDSHSLK
RDSDATA 5.2V C101 C102 R113 180

C103
RDSLOCK VDD

R1
A-a A-b Detailed page Y401 R-CH
RDSCK 100P 100P
R114 22K
24

28
27
26
25
24
23
22
21
20
19
18
Rch IPPW R115 1K
CWE2097

23 L-CH GND

6 C1
4 E2
5 B2

GND
R103

STB
CLK
DATA
Lch GND

6 C1
4 E2
5 B2
IPPW

IN3_R
IN2_R
IN1_R
IN5+_R
IN4+_R
IN4-_R
BEGND 22 VDD 5.2V Q101

UMH1N
1K

IC201
2SA1576A

R101 4R7K

R102 4R7K
UMH1N

E.VOL

Q402

Front L
IN5+_L
IN4+_L
21 Q401

IN5-_L

IN4-_L
IN3_L
IN2_L
IN1_L
RDS_HSLK A GND
B

Vref
Vcc
RDS_LOCK 20 IC101 R107

C2 3
B1 2
E1 1
C2 3
B1 2
E1 1

RDSDATA

L101
19

1
2
3
4
5
6
7
8
9
RDS_DATA 1 8

10
11
TX 22K
RDSCK DIN1 STBY
18

4R7K
R108
RDS_CK D GND RX 2 7
17 TUN3V 5.2V ROUT VCC
VDD_3.3 VDD 3 6
FM/AM TUNER UNIT

47/6R3

L403 DIN2 BUS+


C403

C404

C407

C104
4R7

R01

16

R1
COMP 4 5
TUDGND GND BUS- Q102
DGND 15 R410 DTC114EUA
47/10

DO
C408
C405

R022
R01

C413

DO 14 HA12241FP
0R0
13 TUN5V GND GND GND
ROM_VDD GND
R401 680 R411 680 TUNPDI
OSCGND 12
680

10/25
11 RFGND R402 LDET

1
1

1
R22
LDET

R1
DI R403 680 R412 680 TUNPDO
DI 10
CK R404 680 R413 680

C206

C207

C208
C209

C210
C211
C212

C213
9 TUNPCK
CK
CE1 R405 680 CE1
CE1 8 100P
C417

C420
47P

WC 7 CE2
R406 680 CE2
CE2 6
R407 UGND DGND
SL 680 SL
5

BUSL+

BUSL-
AUXG
SL

AUXL

TUNL
L402 VCC

CDL
4 TUN8V
VCC IC431
R01

FMANT NJM2885DL1-33
FM_ANT 3 8.4V
C410

100/16

2 RFGND VCC
RF_GND
2 GND
3 OUT
C406

AMANT L401

AMPPW

ROMCS
ROMCK

VCK
RDSCK

ROMDATA
VDT
TUNPDO

CE1
CE2

VST
1

ASENS

TUNPCK
RDSLOCK

LDET

IPPW
RDSDATA
1 IN

ISENS
TUNPDI
AM_ANT TESTIN
3.3V
IC651 R605
IMSA-6801-01Y901

RF GND S-80835CNMC-B8U

5
TUNPCK 100K
47/6R3

C432

C434

ANT401 RESET
1/50

N.C1

N.C2
CKX1056
ZNR401

3 1
3 1
2 2 VSS

VDD
OUT
VSS
D GND 3.3V 5.2V
VDD
CN151

3
2
1
RF GND
RST1 GND
AUX AUXR AUX : 2.2dBs R159 AUXR
WIRE REMOTE

75
74
73
72

RCK 71
NC 70
NC 69
AMPPW 68
67
66
65
64
63
62
61

VCC 60
NC 59
ROMCS 58
ROMCK 57
56
55
54
53
52
51
C AUXL 100
4700P 4700P
R162 R161
C154

22K

VCK
ROMDATA
VSS

VDT
TUNPDO

VST
AUXG 76 50

ASENS
RDSSDT

TUNPCK
8R2K

LDET

IPPW
RDSSLK
R652
RDSHSLK

TUNPCE1
TUNPCE2
5

ISENS
TUNPDI
R165

TESTIN
(AUX) 4 AUXG RST2
3 77 49
1K
C155

22K

2 R653 RST
(W/R) 1 R160 78 OELPW 48
AUXL
1K 79 NC RDS57K FLPILM
100 2R2/50 SWVDD 47

C651
NC ILMPW
MALS068X

80 NC SYSPW 46
MALS068X

MALS068X
D155

C152

NC
D153

D154

R1

VDD 5.2V 81 NC DALMON 45


GND 82 NC NC 44
83 NC BSRQ 43
R153

R154
10K

10K

84 NC BRXEN 42
WGND KEYD GND GND
R151 KEYD 85 NC BRST 41
86 NC IC601 40
KEYAD 1K TELIN
R152 MODEL
KEYAD 87 NC PEG402A8 MUTE 39
GND 1K
88 NC ASENBO 38
C160

C161

89 NC PCL 37
R01

R01

90 NC DIM 36
CSENS 91 CSENS NC 35
GND KEYAD 92 KEYAD KYDT 34
93 MODEL DPDT 33
94 AVSS KEYD 32
CD : 0dBs
SL 95 SL BSCK 31
5.2V 96 VREF 30
C720

VDD BSI
1

CD MECHA. 97 AVCC BSO 29


CN701
C601

100P

98 NC TX 28
R722 4R7K

R724 4R7K
R723 100K

R725 100K

VD USB GND IC501 99 NC NC RX 27

VDCONT

USBCTL
19 BD9781HFP

CNVSS

DSENS

CDRST
BSENS
RESET
EJTIN

XOUT
BYTE
100 SYNC 26

VCC
VSS

PEE
RX2

FLG
NMI
18

XIN
NC
NC
NC
NC
NC

NC
NC
GND

25 NC
BRSQ R726 220 BSRQ
GND

17 D502
VIN

INV
SW

EN
RT

FB

1
2
3
4
5
6
7
8
9
BRST 1SR139-400

10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
BRST SYNC
16
BSCK R728 220
1

3
4
5
6
2

BSCK
15
D BRXEN R729 220
SYNC CNVSS
NMI

R604
BRXEN
C502

C504
220/16

0R0
14 INV R611
1

220

47K
BDATA R730 BDATA

R603

0R0
13 GND RT
CDRST R731 220 100K

R607
CDRST 5.0V

680
12

R606
CDVDD SW C603 C604
R733
D

USB5V
100K

11 GND
R721

100K

L501 FB 22P 18P


10 GND GND
82K

CDR R710 C702 X601


R508
CN701

9 GND D501
C506

CSS1653
R01

AGND 1K 1500P
8 GND D C501 RB060L-40 15.000 MHz
C507

CDL R716 C705 Q751


R1

7.5V 2SD2396

VDCONT
7

USBCTL
IC780
DSENS

CDRST
BSENS
150/6R3
R506

68K

CDGND 1K 1500P NJM2885DL1-33


EJTIN

6 GND
RST

FLG
R751

VDCONT
(1/4W)

PGND 5.2V
560

INV2
6R8K

R509

5 A GND C503 R503


RT3T22M
2 GND

VDD
3 OUT

DP 3.3V
4 C2 3 4 E2
1 IN

220P 33K
100/16

DM
MTZJA8R2(B)

R047

R502
3 B1 2 5 B2
R1

USGND3 P GND
D751

8R2K

2 E1 1 6 C1 33K
R505
C751

C752

Q752
C753

CDGND VDCONT
47/6R3

4R7/35
C781

C782

C783

C784
R01

1 GND
R511
1

470 USB 5V
P GND VD 7.5V GND
CDGND U GND

MC2848-11
VDD 3.3V
CN801
D804
CN1950
CDR
CDL
CN1951 KYDT KYDT R801 2R2K
14 14
1 OELG NC
L521 12 13 13
2 1
2 OELG EJECT NC
USB 3 DPDT
11
CSG1112
12
DPDT
12
DPDT R804 2R2K
5.2V 10 11 11
VDD 4 NC OEL+B OEL+B
3 4 9 10 10
CN521 S1970

VBUS (RED) 1
US5V

USDM D521 MALS068X


5.0V
B 5
6
KYDT
NC
8
7
R1971

R1970
100
9
8
DGND
EJSW
9
8
DGND
EJSW R805 2R2K D GND
5

D- (WHITE) 2 7 DGND ILM+ ILB+


CN1901 6 100 7 7
VOUT

USDP
VIN

OEL+B FILM- FILM-


R5523N001B

D+ (GREEN) 3 8
R1

E USGND 5 D1970 6 6
C521
IC521

MALS068X 390 (1/4W)


R525

D522 ILM+ FILM+ FILM+ R806


R1

10K

GND (BLACK) 4 9 CL220PGC 5


USGND2 4 5
C522

GND

CSENS CSENS CSENS R807 2R2K


FLG

5 10
EN

3 4 4
11 SWVDD R1972 OELGND OELGND
2 3 3
1
2
3

GND FLG ILMG 0R0 SWVDD SWVDD1


12 1 2 2
USBCTL FLG
ILMGND ILMGND VDD
USBCTL 1 1 OEL GND
3
C1970

MC2846-11
MC2850-11
R1

D805
D801
C523

R01

2
1

GND

GND

C PANEL UNIT
GND

ILM GND

14V OEL 14V

R831 0R0

NOTE :
Symbol indicates a resistor. Decimal points for resistor
No differentiation is made between chip resistors and and capacitor fixed values
discrete resistors. are expressed as :
Symbol indicates a capacitor. 2.2 t 2R2
No differentiation is made between chip capacitors and 0.022 t R022
discrete capacitors.

The > mark found on some component parts indicates


F the importance of the safety factor of the part.
Therefore, when replacing, be sure to use parts of
identical designation.

A C
DEH-P6000UB/XN/EW5
42
1 2 3 4
5 6 7 8

A-b
A TUNER AMP UNIT
CDR

VCK
AUXR

TUNR

VDT
VST
BUSR+

BUSR-

R205 100 SWR


R206 100 SWL
1K
1K
1K
R22

R207 100 RR
1

R208
R201
R202
R203

100 RL
C201

C202

C203

C204

C205

R209 100 FR
R210 100 FL
A GND

FM : -0.9dBs
AM : -0.9dBs
CD : 10.1dBs
28
27
26
25
24
23
22
21
20
19
18
17
16
15

8.4V
A GND VCC AUX : 9.3dBs
GND

PGND
STB
CLK
DATA
IN3_R
IN2_R
IN1_R

Rear_R
IN5+_R
IN4+_R

Pre/SW_R
IN4-_R

Front_R

PML018A

IP-BUS : 9.3dBs AGND1


Pre/SW_L
IC201

E.VOL CAPTAIN 6
Front_L
Rear_L
IN5+_L
IN4+_L
IN5-_L

IN4-_L
IN3_L
IN2_L
IN1_L

B
Vref

Pref
Vcc

Vp
1
2
3
4
5
6
7
8
9
10
11
12
13
14

L202
R204

0R0

VP 12V C303 R303


FR
L201
4R7/35 820 R309

R315

22K
C1
B2
E2
4R7K

6
5
4

RT3C99M
10/25

Q302
1

1
1

FRONT
R22

R1

C214

C215

C216

C217
47/16

10/25

R1

CN301
47/16

1
2
3
C2
E1
B1
RCA OUT

R316
R310
C206

C207

C208
C209

C210
C211
C212

C213

22K

R321

0R0
C304 R304 4R7K NC
FL RCAGND 1
4R7/35 820 NC 2
SWR 3
FR
BUSL+

BUSL-
AUXG

4
AUXL

TUNL
CDL

A GND SWL
C305 R305 5
SWR
FL 6
4R7/35 820 R311
GND 7

R317

22K
C1
B2
E2
AMPPW

4R7K

6
5
4
ROMCS
ROMCK

VCK
ROMDATA
VDT
TUNPDO

CE1
CE2

VST

GND 8
TUNPCK

IPPW

RT3C99M
5.2V
ISENS
TUNPDI

TESTIN

Q303
R605 VDD SW GND 9

R320

0R0
GND

1
2
3
C2
E1
B1
100K 10

R318
R312

22K
A GND
4R7K
R641

C306 R306
100K

SWL

VSS 4R7/35 820

CEK1286
FU301
>

3A
GND ROMDATA

A GND
AMPPW 68
67
66
65
64
63
62
61

VCC 60
NC 59
ROMCS 58
ROMCK 57
56
55
54
53
52
51

MUTE1 Q381
RT3T22M R381 1SS133 C
VCK
ROMDATA
VSS

VDT
TUNPDO

VST

50
TUNPCK

IPPW

FLPILM
TUNPCE1
TUNPCE2

ISENS
TUNPDI

TESTIN

TP381 C2 3 4 E2
49 ILMPW 1KD381

C381
22/16
B1 2 5 B2
OELPW 48 OELPW
E1 1 6 C1
FLPILM SWVDD 47 SWVDD AMP
ILMPW
SYSPW 46 SYSPW MUTING IC351
PAL007C
GND
DALMON 45 DALMON
1 TAB
NC 44 2 PGND2
BSRQ 43 BSRQ AMPPW RL-
3 RL-
R361
BRXEN 42 BRXEN AMPPW
4 STBY
BRST 41 BRST 15K RL+
5 RL+
IC601 40 TELIN
TELIN 6 VCC
PEG402A8 MUTE 39 MUTE
SYS+B RR-
7 RR-
IC911
ASENBO 38 ASENBO
NJM2388F84 8 PGND1
PCL 37 RR+
9 RR+
4 CONTROL

PCL R610 100K 8.4V 10/25


DIM 36 GND DIM
VCC 10 SVR
2 VOUT
3 GND

R47 R47
NC 35 TP911 RR R351 0R0 C351 C355 C362
1 VIN

SYSPW 11 RRIN
R911 R47 R47
KYDT 34 KYDT SYSPW RL R352 0R0 C352 C356
12 RLIN
DPDT 33 DPDT 1K VCC
13 AGND
R47 R47
KEYD 32 KEYD FL R353 0R0 C353 C357
14 FLIN
R47 R47
BSCK 31 R354 0R0 C354 C358
R912

BSCK FR
10K

15 FRIN
C911

C912

C913

C914
100/16
220/16

R01

30 C360 C364
BSI ACGND
R01

16
8.4V
BSO 29 BDATA
GND VCC
2R2 2R2 FR+
17 FR+
TX 28 TX MUTE2 A GND 18 PGND3
R359 R362
RX 27
VDCONT

RX GND FR-
USBCTL

19 FR-
DSENS

CDRST
BSENS
RESET

R612 C361
EJTIN

XOUT

SYNC 26 SYNC 10K 330


VCC
VSS

PEE
RX2

FLG

VCC
NMI

20
XIN

NC
NC

R360

C363
25 NC

10K

33/10
2R2K R1 FL+
21 FL+
GND
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24

Q351 22 MUTE
PEE DTC124EUA
R608 FL- FL-
23
D
CPV1062

NMI 1
BZ601
R604

GND PGND4
0R0

R611 1K 24
47K

2
5.2V B.REM
0R0

GND 25
100K VDD REG.
R607

VDD
680

GND VDD1
R606

R363
C603 C604

0R0
VDD2 Q901 TP901
2SD2396 1SR139-400 VCC
L602 8.4V
22P 18P
GND E-MUTE
MC2848-11

X601 D902
D391

R391

22K
4R7/35

8R2K

2R2K
C605

C607

C609

R902

R903

1SR139-400
D352
CSS1653
1

15.000 MHz TP902


1000/16

MUTE
2SC4081

TP391TP392 D392
C902

C904
VDCONT

RT3T22M
R01
47/16
USBCTL

C901

HZS9L(A2)

3300/16
DSENS

CDRST
BSENS

C981
MUTE R392
EJTIN

C2 3 4 E2
Q391
RST

4700P
FLG

HZS6L(B1)

1SR139-400
D351
GND 68K
D901

R393

B1 2 5 B2
68K
C903

E1 1 6 C1
Q902
GND
DALMON GND B.REM GND
DALMON
GND

VDD 5.2V
L981
CN981 >
BUP3 BUP2 BUP1
D922 600 H YEK5001 BUP
BSENS2 BSENS1 16
HZS7L(C3) 16
R921

100K

R923 GND3 GND2 GND1 10A GND


MC2848-11

ASENS 15 15
100K ACC ACC
R808

R815
47K

47K

CN801
R817

R926
D804

100K

47K

14 14
C2
E1
B1

1SR139-400

1SR139-400
1
2
3

DSENS
R1
RT3CLLM

13 13
D981

D982

KYDT R801 2R2K


Q921

KYDT ILM ILL


14 GND 12 12
R922

C982
100K

13 BEM B.REM
6
C1
5
4
B2
E2

BSENS ASENS1 D921 11 11


12 HZS7L(A1) R928
DPDT R804 2R2K R811 1K DETACH DPDT
R924 TEL 10 10
11 MUTE
ASENS 10K 9 9
4R7K

1K
R927

C921

OEL+B S801 DSENS


R925

GND
R1
47K

10 R816 ASENS2 RL- RL- RL-


DGND
1 2 DSENS BSENS (1/4W) 8 8
9 FL- FL- FL-
CSN1039 1K 7 7
EJSW R805 2R2K D GND R813 U GND EJTIN
8 GND RL+ RL+ RL+
ILB+ 6 6
2R2K FL+
7 FL+ FL+
5 5
R931

100K

FILM- RR-
6
5
FILM+ R806 390 (1/4W) ISENS
R932 D931 R933
RR-
FR- FR-
4
3
4
RR-
FR-
E
CSENS R807 2R2K Q931 3
CSENS DTC114EUA RR+ RR+ RR+
4
D OELGND 10K 1K 2 2
1SS133
C931

ILM SENS FR+


RT1N431M

1/50

3 FLPILM (1/4W) FR+ FR+


1 1
Q801

SWVDD1
D
2
ILMGND VDD GNDGND
FM : 25.1dBs
1 OEL GND
9.0V R822 Q821 2SD1767 AM : 25.1dBs
3

MC2846-11
MC2850-11

VDD
GND 5.2V
D805
D801

5.2V D951
1
Q891 TP891 TEL MUTE
R952
L951 R954 CD : 36.1dBs
R823

TP822 VDD
(1/4W)
470

2SA1576A
2
1

4R7K
RT3T22M
5.1V L891
2SA1576A 15K AUX : 35.3dBs RR RR
MC2848-11
4R7K

C8224700P

TELIN
MTZJA10(B)

Q951 (1/4W) - +
IP-BUS : 35.3dBs
HZS7L(A3)

C2 3 4 E2
D821

R893
D822

GND TELIN R951 BACK FR FR


B1 2
UP - +
5 B2 47K GND
R892
2R2K

1K FL FL
1K
R891

C893

B.
R821

ILM
1

ILM GND E1 1 6 C1 REM - +


Q823 RL RL
TP823 TP893 OEL 14V TP562 9.2V Q561 GND ACC
14V OEL 14V TP892 L561 R567 - +
DTC114EUA

2SD1858 TP565
Q892

ILM GND SWVDD D561


TP821 U GND
1 R568
R831 0R0 RB551V-30 RT3T22M
Q822
47/16
4R7K(1/4W)

DTC114EUA C2 3 4 E2
C562

R562

C564

R022

8 R566 680
47/25

1
MTZJA10(B)

R1

CS CD B1 2 (1/4W)
5 B2
D563

2 7 820
ILM CONTROL SWVDD TP563 ES SI E1 1 6 C1
C568

ILM GND U GND TP561


C569

3 6 Q562
ILMPW CT V+
DIM GND 4 5 TP566
R563

R564

C565

330P

OELPW GND INVIN


820
1K

C566

C567
100/16
R1

OELPW
IC561 GND
OEL 14V NJM2360M
GND GND TP567

R565 0R0 GND

OELPW

A
DEH-P6000UB/XN/EW5
5 6 7 8
43
F
E
B
A

D
C

44
A-a A-b

A-b
1
1

A TUNER AMP UNIT


R205

VST
VCK
VDT
100 SWR
R206 100 SWL

1K
1K
1K
R207 100 RR
R208 100 RL

R201
R202
R203
R209 100 FR
R210 100 FL
A GND

FM : -0.9dBs
AM : -0.9dBs
CD : 10.1dBs

25
24
23
22
21
20
19
18
17
16
15
8.4V
A GND VCC AUX : 9.3dBs

GND
STB
CLK
AGND1

DATA
PGND
IP-BUS : 9.3dBs

IN3_R
IN2_R
IN1_R
Rear_R
CAPTAIN 6

_
Front_R
Pre/SW_R
PML018A

2
2

IN4-_L
IN3_L
IN2_L
IN1_L
Vref
Vcc
Front_L
Rear_L
Pre/SW_L
Vp
Pref

4
5
6
7
8
9
10
11
12
13
14
L202

VP

0R0
12V C303 R303

R204
FR
L201
4R7/35 820 R309

6
5
4

C1
B2
E2
22K
4R7K
R315

1
1
FRONT

R1

10/25

R22
Q302

R1
1
2
3
RT3C99M

C214
C215
C216
C217
E1
B1
C2
R310 CN301

47/16
10/25
47/16
RCA OUT
22K

R316
0R0

C209
C210
C211
C212
C213
R321

C304 R304 4R7K NC


FL RCAGND 1
4R7/35 820 NC 2
SWR 3
FR

DEH-P6000UB/XN/EW5
4
A GND SWL
5

BUSL-
TUNL
CDL
SWR C305 R305
FL 6
4R7/35 820 R311
GND 7
6
5
4

C1
B2
E2
22K

4R7K
R317

3
3

5.2V GND 8

VDT
VCK
VST
IPPW
VDD SW GND 9

ISENS
Q303

GND
1
2
3
RT3C99M
0R0

10
E1
B1
C2

R312
R320

A GND
22K

R318

C306 R306 4R7K


SWL

R641
100K
4R7/35 820
3A
FU301

>
CEK1286

ROMDATA

A GND

55
54
53
52
51
MUTE1 Q381
50 FLPILM RT3T22M R381 1SS133

VDT
VCK
VST
TP381 C2 3 4 E2

IPPW
49 ILMPW 1KD381

ISENS
B1 2 5 B2
OELPW
C381

OELPW 48
22/16

E1 1 6 C1
LPILM SWVDD 47 SWVDD AMP
ILMPW IC351
SYSPW 46 SYSPW MUTING PAL007C
GND
DALMON 45 DALMON TAB
1
NC 44 2 PGND2
BSRQ 43 BSRQ AMPPW RL-
3 RL-
BRXEN AMPPW R361
BRXEN 42 4 STBY
BRST 15K RL+

4
BRST 41
4

5 RL+
TELIN 40 TELIN VCC
6
MUTE 39 MUTE
SYS+B RR-
7 RR-
ASENBO IC911
ASENBO 38 NJM2388F84 8 PGND1
PCL 37 RR+ RR+
100K 9
PCL R610 GND 8.4V 10/25
DIM 36 DIM SVR
VCC 10
TP911 RR R351 0R0 C351 R47 C355 R47 C362
NC 35 SYSPW 11 RRIN
KYDT SYSPW R911 RL R352 0R0 C352 R47 C356 R47
4 CONTROL
3 GND
2 VOUT
1 VIN

KYDT 34 12 RLIN
DPDT 33 DPDT 1K VCC
13 AGND
KEYD FL R353 0R0 C353 R47 C357 R47
KEYD 32 14 FLIN
BSCK FR R354 0R0 C354 R47 C358 R47
BSCK 31 15 FRIN
10K

R912 C360 C364


R01

BSI 30 ACGND
C911
C912
C913
C914

16
100/16

220/16
R01

BDATA 8.4V 2R2 2R2 FR+


BSO 29 GND VCC 17 FR+
TX 28 TX MUTE2 PGND3
NJM2388F84 8
PCL 37 RR+ RR+
100K 9
PCL R610 GND 8.4V 10/25
DIM 36 DIM SVR
VCC 10
TP911 RR R351 0R0 C351 R47 C355 R47 C362
NC 35 SYSPW 11 RRIN
KYDT SYSPW R911 RL R352 0R0 C352 R47 C356 R47

4 CONTROL
3 GND
2 VOUT
1 VIN
KYDT 34 12 RLIN
DPDT 33 DPDT 1K VCC
13 AGND
KEYD FL R353 0R0 C353 R47 C357 R47
KEYD 32 14 FLIN
BSCK FR R354 0R0 C354 R47 C358 R47
BSCK 31 15 FRIN

10K
C360 C364

R912
R01
BSI 30 ACGND

C911
C912
C913
C914
16

100/16

220/16
R01
BDATA 8.4V 2R2 2R2 FR+
BSO 29 GND VCC 17 FR+
TX 28 TX MUTE2 PGND3
A GND 18
RX R359 R362 FR-
RX 27 GND 19 FR-
R612 SYNC 10K 330 C361
SYNC 26 20 VCC

CDRST
USBCTL
FLG
2R2K R1 FL+

10K
21 FL+

R360
C363

33/10
GND
5

21
22
23
24 PEE
25 NC

5
Q351 22 MUTE
PEE DTC124EUA
R608 FL- FL-
23
1 GND
R611 1K 24 PGND4
2

BZ601
GND 25 B.REM

CPV1062
100K
5.2V
VDD
VDD REG.

680
GND VDD1

R607
VDD2 Q901 TP901
1SR139-400
0R0

L602 2SD2396 VCC


R363

8.4V
D902 E-MUTE

D391

1
1
22K

R391

C605
C607
C609
R902
8R2K
R903
2R2K
TP902
D352

4R7/35
MUTE

MC2848-11
RT3T22M TP391TP392 D392
R392 HZS9L(A2)

R01
MUTE

C902
C904
1SR139-400

C2 3 4 E2

47/16
C901
1000/16
C981

2SC4081
GND

Q391
68K

CDRST
USBCTL
FLG
3300/16

B1 2 5 B2

4700P
D351

68K

D901
R393
E1 1 6 C1

C903
Q902

HZS6L(B1)
GND
1SR139-400

DALMON GND B.REM GND


DALMON
GND

VDD 5.2V CN981


L981 BUP3 BUP2 BUP1 >
D922 600 H YEK5001 BUP
BSENS2 BSENS1 16
HZS7L(C3) 16
R923 GND3 GND2 GND1 10A GND
15

R921
100K
ASENS 15

6
6

100K ACC ACC


14 14

47K
47K

R808
R815
1
E1
2
B1
3
C2
47K

R817
100K
R926

D804
DSENS
R1

13 13

MC2848-11
KYDT ILM ILL
GND
D981
D982

12 12

Q921
BEM B.REM

6
5
4
RT3CLLM

R922
100K
C982
1SR139-400

11 11
1SR139-400

C1
B2
E2

1
BSENS ASENS1 D921
R924 HZS7L(A1) R928
R811 1K DETACH TEL 10 10
DPDT MUTE
S801 DSENS ASENS 10K 1K 9 9
R816 ASENS2 GND RL-
R1

1 2 DSENS (1/4W) RL- RL-


47K

8
R927
4R7K
C921

BSENS 8
R925

FL- FL- FL-


CSN1039 1K 7 7
GND R813 U GND EJTIN GND RL+ RL+ RL+
6 6
2R2K FL+
FL+ FL+
5 5
RR- RR- RR-

R931
100K
ISENS 4 4
FR- FR- FR-
Q931 R932 D931 R933 3 3
CSENS DTC114EUA RR+ RR+ RR+
10K 1K 2 2
1SS133 FR+
FLPILM ILM SENS (1/4W) FR+ FR+
1 1
1/50
C931

Q801
GNDGND
FM : 25.1dBs

RT1N431M
R822

3
9.0V Q821 2SD1767 AM : 25.1dBs
VDD
GND 5.2V 5.2V D951
1 R952

DEH-P6000UB/XN/EW5
Q891 TP891 L951 R954 CD : 36.1dBs

D805

D801
TP822 2SA1576A VDD TEL MUTE

2
1
470
5.1V L891 4R7K

R823

MC2846-11
2SA1576A 15K AUX : 35.3dBs RR RR

(1/4W)
RT3T22M MC2848-11

7
7

TELIN Q951 (1/4W) - +


C2 3 4 E2 R893 IP-BUS : 35.3dBs BACK

4R7K
GND TELIN R951 FR FR
UP - +

D821

D822
B1 2 5 B2 47K GND
1K B. FL FL
ILM

1K

C8224700P
REM - +

HZS7L(A3)
R892

MTZJA10(B)
E1 1 6 C1

R891
2R2K
C893

R821
Q823 RL RL
TP893 9.2V GND ACC
OEL 14V TP823 TP892 OEL 14V TP562 L561 R567 Q561 - +
2SD1858 TP565
ILM GND SWVDD D561
TP821 U GND
1

Q892
831 0R0 RB551V-30 RT3T22M R568
Q822
DTC114EUA 1 8 R566
C2 3 4 E2 680

DTC114EUA
47/16
R1

CS CD (1/4W)
C562
R562
C564
R022

B1 2 5 B2
47/25

TP563 2 7 820
SWVDD ES SI
D563

ILM GND
ILM CONTROL U GND E1 1 6 C1
4R7K(1/4W)

3 6 TP561
ILMPW Q562
CT V+
C568
MTZJA10(B)
C569

DIM GND 4 5 TP566


OELPW GND INVIN
1K
820

OELPW
R563
R564
C565
330P
R1

C566
C567

IC561 GND
100/16

OEL 14V NJM2360M


GND GND TP567

R565 0R0 GND

OELPW
8

8
A-a A-b

A-b
45
E
A

D
C

F
B
F
E
B
A

D
C

46
A-a A-b

A-a
A-b
: The power supply is shown with the marked box.

1
1

FM : -20dBs CDR
VST
VCK
VDT

AUXR
TUNR
AM : -20dBs IP-BUS : 2.2dBs

BUSR-
BUSR+
BUSL+
BUSL-
BUSR+
BUSR-
TUNR

ASENBO

BUS+
BUS-
L+
R+
R-
L-
1K
1K
1K

CN101

1
1
1
1

TUNL
R22

1
5
6
7
8
9

3
4

2
10
11
VDD
5.2V
R201
R202
R203

RDS

C201
C202
C203
C204
C205

R109 1K

L+
R+
R-
L-

BUS+
BUS-
BGND
14V

8
7
6
5
IPBUS R110 22K
A GND
TUNER R105
R111 180

22K

R408
62

2
3
4

1
RDSHSLK R112 2R2K

100
100

R104
R106
RDSDATA 5.2V C101 C102 R113 180
RDSLOCK VDD
R-CH R114 22K

R1
Y401 100P 100P
RDSCK

C103
24
28
27
26
25
24
23
22
21
20
19
18
17

Rch IPPW R115 1K


23 L-CH GND
Lch IPPW R103 GND

4 E2
5 B2
6 C1
GND
STB
CLK

4 E2
5 B2
6 C1
22 Q101
DATA

BEGND 1K VDD 5.2V 2SA1576A


IN3_R
IN2_R
IN1_R

IN5+_R
IN4+_R
IN4-_R
Rear R

RDS_HSLK 21 A GND E.VOL


Front_R

IC201

Q402

UMH1N

2
Q401
2

UMH1N
20

CWE2097
IN5-_L
IN5+_L
IN4+_L
IN4-_L
IN3_L
IN2_L
IN1_L
Vref
Vcc
Front_L
Rear_L

RDS_LOCK IC101 R107


RDSDATA
1
2
3
4
5
6
7
8
9

19

C2 3
B1 2
E1 1
R101 4R7K
R102 4R7K
RDS_DATA 1 8

C2 3
B1 2
E1 1
10
11
12

TX 22K

L101
RDSCK DIN1 STBY
RDS_CK 18 D GND 2 7
RX
TUN3V 5.2V ROUT VCC

R108
4R7K
VDD_3.3 17 VDD 3 6
L403 DIN2 BUS+
COMP 16 4

R1
5

4R7
R01

C403
C404
C407
C104
TUDGND GND BUS- Q102

47/6R3
DGND 15 R410 DTC114EUA
14 DO
DO 0R0 HA12241FP

R01
47/10

C408

C405
R022
TUN5V GND GND GND

C413
ROM_VDD 13
R401 680 R411 680 TUNPDI GND
OSCGND 12
R402 680
1
1
1
1
1

11 RFGND LDET
LDET
R1

10/25

R22

DI R403 680 R412 680 TUNPDO


DI 10
CK
C214

R404 680 R413 680


47/16

9 TUNPCK
CK
CE1
C206
C207
C208
C209
C210
C211
C212
C213

R405 680 CE1


CE1 8

47P
WC 7 CE2

100P

C417
C420
R406 680 CE2
CE2 6
R407 UGND DGND
SL 680 SL
5

DEH-P6000UB/XN/EW5
SL

FM/AM TUNER UNIT


TUN8V L402 VCC
4
AUXL

VCC IC431
AUXG
BUSL+
BUSL-
TUNL
CDL

3 FMANT NJM2885DL1-33
8.4V

R01
FM_ANT
2 RFGND VCC

C410
RF_GND

100/16
AMANT L401

3
3

AM_ANT 1 TESTIN

C406
CE1
CE2
VDT
VCK
VST

3.3V

3 OUT
2 GND
1 IN
LDET
IPPW

IC651 R605
ASENS
RDSCK
AMPPW
ROMCS
ROMCK
ISENS

S-80835CNMC-B8U
TUNPDO
TUNPDI
TUNPCK

RF GND

4
5
RDSDATA
RDSLOCK
ROMDATA

TUNPCK 100K
ANT401 RESET
CKX1056

C432
1/50
C434
3 1

47/6R3
N.C1
N.C2

3 1
2 2 VSS

ZNR401
IMSA-6801-01Y901
5.2V
VSS
VDD
OUT

D GND 3.3V VDD


3
2
1

CN151 RF GND
RST1 GND
AUX AUXR AUX : 2.2dBs R159 AUXR
75
74
73
67
66
65
64
63
62
61
56
55
54
53
52
51

WIRE REMOTE AUXL 100


6
AUXG 76 50

22K
RDSHSLK
NC 70
NC 69
NC 59

5 R165

C154
(AUX) AUXG
RCK 71
VSS
VCC 60
VDT
VCK
VST

4 RST2
R652
8R2K
LDET 72
IPPW

3 77 49
ASENS
AMPPW 68
ROMCS 58
ROMCK 57
ISENS

1K R653
2
RDSSDT
RDSSLK
TUNPDO
TUNPDI
TUNPCK
TESTIN

RST

22K
(W/R) R160 78

R162 R161
TUNPCE1
TUNPCE2
ROMDATA

1 OELPW 48

C155
4700P 4700P
AUXL
100 1K 79 NC RDS57K FLPILM SWVDD 47
NC ILMPW
C651

80 NC SYSPW 46
NC
2R2/50

R1
VDD 5.2V 81 NC DALMON 45

D155
C152

D153
D154
MALS068X

MALS068X
MALS068X
GND 82 NC NC 44
83 NC BSRQ 43
84 NC BRXEN 42

10K
10K
GND GND

R153
R154
WGND KEYD

4
R151 KEYD 85 NC BRST 41
4

IC601 40
KEYAD 1K 86 NC TELIN
R152 MODEL
KEYAD 87 NC PEG402A8 MUTE 39
GND 1K
88 NC ASENBO 38
89 NC PCL 37

R01
R01

C160
C161
90 NC P
DIM 36
CSENS 91 CSENS NC 35
GND KEYAD 92 KEYAD KYDT 34
93 MODEL DPDT 33
94 AVSS KEYD 32
CD : 0dBs
SL 95 SL BSCK 31
5.2V 30
VDD 96 VREF BSI
1
C720

CD MECHA. 97 AVCC BSO 29


601

CN701
00P

K
K

K
K
98 NC TX 28
89 NC PCL 37

R01
R01

C160
C161
90 NC P
DIM 36
CSENS 91 CSENS NC 35
GND KEYAD 92 KEYAD KYDT 34
93 MODEL DPDT 33
94 AVSS KEYD 32
CD : 0dBs
SL 95 SL BSCK 31
5.2V
VDD 96 VREF BSI 30

1
C720
CD MECHA. 97 AVCC BSO 29
CN701 98 NC TX 28

C601
100P
VD USB GND IC501 99 NC NC
19 BD9781HFP RX 27
100 SYNC 26
18
GND

R722 4R7K
R723 100K
R724 4R7K
R725 100K
NC
NC
NC
NC
NC
BYTE
CNVSS
EJTIN
DSENS
RESET
XOUT
VSS
XIN
VCC
NMI
BSENS
NC
NC
RX2
VDCONT
CDRST
USBCTL
FLG

BRSQ R726 220 BSRQ


17 D502

1
2
3
4
5
6
7
8
9
BRST 1SR139-400

VIN
SW
GND
EN

RT
FB
INV
5

10
11
12
13
14
15
16
17
18
19
20
21
22
23
24 PEE
25 NC

BRST

5
16 SYNC

1
3
4
5
6

2
7
BSCK R728 220 BSCK
15 SYNC CNVSS
BRXEN R729 220 BRXEN NMI
14

1
INV R611

R604
220 0R0
BDATA R730 BDATA

C502
C504
47K

13 GND RT

220/16
100K

0R0
CDRST R731 220 CDRST

R603
12 5.0V
680

C603 C604
R607

CDVDD USB5V SW VD
11 GND
R606

L501

R733
100K
FB 22P 18P

D
10 GND GND

R721
100K
CDR R710 C702 X601

82K
9 GND D501

R508
AGND 1K 1500P CSS1653
GND D

R01
8 C501 RB060L-40 15.000 MHz

C506
CDL R716 C705 Q751

R1
7 IC780 7.5V 2SD2396

C507
CDGND 1K 1500P 150/6R3
NJM2885DL1-33 GND

68K
6

R506

CN701
PGND VDCONT INV2
EJTIN
DSENS
RST
BSENS
VDCONT
CDRST
USBCTL
FLG

5.2V C503 R503

560
5 A GND

R751
VDD RT3T22M
DP 3.3V

(1/4W)
6R8K
R509
4 C2 3 4 E2 220P 33K
DM R502

3 OUT
2 GND
1 IN
3 B1 2 5 B2

R1
100/16
R047
USGND3 P GND
2 E1 1 6 C1 33K

D751
Q752

8R2K
CDGND VDCONT

R505
1 GND

1
C751
C752
R511

C753

R01
MTZJA8R2(B)

C781
C782
C783
C784

47/6R3
4R7/35
470 USB 5V
P GND VD 7.5V GND
CDGND U GND

6
6

VDD 3.3V
CDR CN1950 CN801
D804
MC2848-11

CDL
CN1951 KYDT KYDT R801 2R2K
14 14
1 OELG NC
L521 12 13 13
2 1
1

2 OELG EJECT NC
11 12 12
USB 3 DPDT CSG1112 DPDT DPDT R804 2R2K
5.2V 10 11 11
VDD 4 NC OEL+B OEL+B
3 4 9 10 10
CN521 KYDT S1970 R1971 DGND DGND
US5V 5 8 9 9
5.0V 100
NC EJSW EJSW R805 2R2K D GND
VBUS (RED) 1 B 6 8
7 8

5
4
USDM D521 MALS068X R1970
D- (WHITE) 2 7 DGND ILM+ ILB+
6 100 7 7
USDP CN1901 OEL+B FILM- FILM-
D+ (GREEN) 3 8

VIN
5 D1970 6 6

R1
VOUT
USGND D522 MALS068X ILM+ FILM+ FILM+ R806 390 (1/4W)
GND (BLACK) 4 9 CL220PGC

R1
4 5 5

10K

C521
USGND2

R525

IC521
CSENS CSENS CSENS R807 2R2K
5 10 4
3 4

C522
EN
GND
FLG
R5523N001B
11 SWVDD R1972 OELGND OELGND

1
2
3
2 3 3
GND FLG ILMG 0R0 SWVDD SWVDD1
12 1 2 2
USBCTL FLG
ILMGND ILMGND VDD
USBCTL 1 1 OEL GND
3

R1

DEH-P6000UB/XN/EW5
C1970
D805

D801

R01

C523
2
1

GND
MC2846-11

MC2850-11

7
7

GND GND

C PANEL UNIT ILM GND

14V OEL 14V

R831 0R0

NOTE :
Symbol indicates a resistor. Decimal points for resistor
No differentiation is made between chip resistors and and capacitor fixed values
discrete resistors. are expressed as :
Symbol indicates a capacitor. 2.2 t 2R2
No differentiation is made between chip capacitors and 0.022 t R022
discrete capacitors.
8

8
The > mark found on some component parts indicates
the importance of the safety factor of the part.
Therefore, when replacing, be sure to use parts of
identical designation.
A-a A-b

A-a C
A-b

47
E
A

D
C

F
B
1 2 3 4

10.2 KEYBOARD UNIT

5.1 V
CN1901
OELG
1
OELG
2
R1901
DPDT
3
2R2K
4 NC
R1902
KYDT

B
C 5

6 NC
DGND
2R2K

CN1951 7
OEL+B
OEL+B
14 V L1901
8
ILM+ ILB+
9

C1920

R01
CSENS
10 SW+5
SWVDD
11
ILMG
ILMG
12
ILMG
R1903

47K

JOYST(V)
ILMG SW
OELG DGND over~under
A(UP) 0.00 0.50
9.0 V B(LEFT) 0.50 1.30 B
C(DOWN) 1.30 2.30
D(RIGHT) 2.30 3.70
PUSH 3.70 4.50
RELEASE 4.50 5.00

CL-197HB1-D(CDE)
C

CL-197HB1-D(CDE)
CL-197HB1-D(CDE)

CL-197HB1-D(CDE)
CL-197HB1-D(CDE)

C1909

D1908

C1906
R1
C1902

C1904

C1907

D1905
D1901

D1903

D1906

R1
R1

R1

R1

R1952

1K
R1920

10K
CL-197HB1-D(CDE)
CL-197HB1-D(CDE)

CL-197HB1-D(CDE)

CL-197HB1-D(CDE)

MULTI CONTROL
C1910
C1905
C1903

D1902

D1904

D1909

R1957
R1
R1
R1

C1908

S1906
D1907
R1

CSX1120

Phase_B 10 1 Phase_A

Push 9 2 Enc_Com
R1908

390
R1904

R1905

R1906

R1907
180

180

180

180

D8 3A

R1917

33K
C7 4B

GND 6 5 Com
R1909

R1910

R1911

R1912

R1913
220

220

220

220

390

DGND
8R2K ILMG R1924
D
R1921 3R3K

R1916 R1918 R1922 R1925

33K 8R2K 3R3K 2R2K


ILMG
4

4
3

3
BAND
CSG1155

CSG1155

CSG1155

CSG1155
DISP
SRC
RDM
S1901

S1902

S1904

S1907
2

2
1

1
R1919 R1923 R1926

8R2K 3R3K 2R2K


4

4
3

MUTE
CSG1155

CSG1155

CSG1155
S1903

S1905

S1908
LIST

TA
2

2
1

E
SW(V)
BUTTON NAME
over~under
S.Rtrv/COMP RPT 0.00 0.50
DISP MUTE/SW 0.50 1.30
SRC CLOCK/TA 1.30 2.30
BAND LIST 2.30 3.70
RDM - 3.70 4.50
RELEASE RELEASE 4.50 5.00

B
DEH-P6000UB/XN/EW5
48
1 2 3 4
CSG1155 CSG1155

3R3K
TA SRC

R1924
S1906
CSX1120
4.50
3.70
2.30
1.30
0.50
0.00

3R3K
3R3K

R1923
R1922
S1908 S1907

JOYST(V)
over~under
2 4 2 4

TI CONTROL

4B
3A
5.00
4.50
3.70
2.30
1.30
0.50
1 3 1 3

5 Com
CSG1155 CSG1155

1 Phase_A

2 Enc_Com

DGND
B
MUTE DISP
R1957

2R2K
2R2K

R1926
R1925
S1910 S1909 10K
2 4 2 4

A
R1928 R1927

C
PUSH
1 3 1 3
2R2K 10K
CSG1155 CSG1155
RPT R1929
S.Rtrv

D
5

DGND
DGND

5
10K
R1930

10K

1K
1K
R1914
R1953
TP1
R1931

OELG
6R8K

R1933 R1932

68K 39K

100
R1935

3R9K
R1934
R1936

10K
C1913
3
VCC
DGND

6
6

10 2
IC1901

GND

TP2
1
GP1UX51RK

Q1902
REM

2SC4081
KYDT

2R2
R1937
DPDT

R1938

10K

DEH-P6000UB/XN/EW5
7
7

OELG
R1941
C1914
22K
VCC

DGND

R01

30K
R1942
1 IC1902
NC1
47K

2
R1940

VSSK PEG411A
3 C1917
IREF

R1
R1
4

C1916
C1915
CVDL

OELG
5
NC2 R22 XREST REM
6 11 10
VKH
7
VAH DPDT ROT0
8
B

VAL 12 9 R1944 47K


9
VSSA KYDT MODE
10 R1945 13 8
XI (1.25MHz)
11
VSSD1 MCLK VCC
1

12 C1918 14 7 MODE
NC3 100

V1901
13

MXS8249
REGS ADKEY2 XIN
14

DGND
2

ISFEL 1 15 6
10.0MHz

15
NC4 R1946 VREF VSS
X1901

16
CSS1577

VDD 16 5
17 R1947
XCS 1K ADKEY1 XOUT
18
3

XRES 17 4
19
XCMD 100 ADKEY0 RESET
20 18 3 R1948
SCL
21
SIRX ROT1 DOUT
22 19 2
SOTX 47K
23
VSSD2 XCMD DCLK
24 20 1
NC5
VSS

R1949
RESET
8

8
1 8 R1950
2 7
150K
3 6
C1919 D1913
4 5
KEYBOARD UNIT

DGND
DGND

100 R1 1SS355

B
49
E
A

D
C

F
B
1 2 3 4

10.3 CD MECHANISM MODULE(GUIDE PAGE)

A
D-a

PICKUP UNIT(P10.5)(SERVICE)

B F
T
C
S

F F
f
T

T
F F

T
F
F
T F
F
T T
T

C d

SWITCHES:
CD CORE UNIT
S901:HOME SWITCH.........ON-OFF
S903:DSCSNS SWITCH.....ON-OFF
S904:12EJ SWITCH............ON-OFF
S905:8EJ SWITCH..............ON-OFF

D The underlined indicates the switch position.

M1 CXC7134
SPINDLE MOTOR
S

C
e
C

M2 CXC4026
T S
LOADING/CARRIAGE MOTOR

F 9 C 7

a 8 4
E 5

F C
F C

3 T
T
S
S

1 CD DRIVER

D
DEH-P6000UB/XN/EW5
50
1 2 3 4
5 6 7 8

D-b A

D CD CORE UNIT(S10.5COMP2-iPod)

SIGNAL LINE
F FOCUS SERVO LINE
T
TRACKING SERVO LINE
C
CARRIAGE SERVO LINE
S
SPINDLE SERVO LINE

B
b

m
l
k

E
A
CN701

i
h j
g

D
DEH-P6000UB/XN/EW5
5 6 7 8
51
F
E
B
A

D
C

52
D-a D-b

D-b
D CD CORE UNIT(S10.5COMP2-iPod)

1
1

SIGNAL LINE
F

1
FOCUS SERVO LINE
T
TRACKING SERVO LINE
C
CARRIAGE SERVO LINE
S
SPINDLE SERVO LINE

2
2

DEH-P6000UB/XN/EW5
3
3

4
4

m
l
5 6 7 8

A CN701

i
j
B

h
g
C

D-a D-b
D
l
m

3 D-b
DEH-P6000UB/XN/EW5
5 6 7 8
53
F
E
B
A

D
C

54
D-a D-b

D-a
D-b

1
1

1
2

PICKUP UNIT(P10.5)(SERVICE)

2
2

F
T
C
S

F F
f
T

DEH-P6000UB/XN/EW5
T
F F

3
3

T
F
F
T F
F
T T
T

4
4

SWITCHES:
CD CORE UNIT
S901:HOME SWITCH.........ON-OFF
S903:DSCSNS SWITCH.....ON-OFF
SWITCHES:
CD CORE UNIT
S901:HOME SWITCH.........ON-OFF
S903:DSCSNS SWITCH.....ON-OFF
S904:12EJ SWITCH............ON-OFF
S905:8EJ SWITCH..............ON-OFF
5

5
The underlined indicates the switch position.

M1 CXC7134
SPINDLE MOTOR
S

C
e
C

6
6

M2 CXC4026
T S
LOADING/CARRIAGE MOTOR

F 9 C 7

a 8 4
5

F C
F C
T S
3

DEH-P6000UB/XN/EW5
T S

7
7

1 CD DRIVER
3
8

8
D-a D-b

D-a
D-b

55
E
A

D
C

F
B
1 2 3 4

10.4 WAVEFORMS

- CD CORE UNIT Note : 1. The encircled numbers denote measuring points in the circuit diagram.
A 2. Reference voltage REFO1(1.65 V)

1DSCSNS 5 V/div 500 ms/div 1DSCSNS 5 V/div 500 ms/div 1DSCSNS 5 V/div 500 ms/div
28SNS 5 V/div 5CLCONT 5 V/div 28SNS 5 V/div
312SNS 5 V/div 4LOEJ 5 V/div 312SNS 5 V/div
4LOEJ 5 V/div 6VD 10 V/div 4LOEJ 5 V/div
12 cm CD Loading operation 12 cm CD Loading operation 8 cm CD Loading operation

Ref.: Ref.: Ref.:


GND GND GND

B
Mode: Mode: Mode:
Normal Normal Normal

7SIN 1 V/div 1 s/div 0FIN 200 mV/div 500 ms/div @TE 500 mV/div 200 ms/div
8CIN 500 mV/div !RFOK(MONI_3) 2 V/div #FE 500 mV/div
9TIN 1 V/div 7SIN 2 V/div

12 cm CD-DA setup operation after loading 12 cm CD-DA Source On setup operation Source On setup operation

C
Ref.: Ref.: Ref.:
REFO REFO REFO

Mode: Mode: Mode:


Normal Normal Normal

#FE 500 mV/div 20 ms/div $MDX 2 V/div 200 ms/div $MDX 2 V/div 5 µs/div
0FIN 500 mV/div 7SIN 500 mV/div 7SIN 500 mV/div
@TE 500 mV/div
D
9TIN 500 mV/div
CD-DA Play operation Spindle waveform during play operation Spindle waveform during play operation
(Wider)

Ref.: Ref.: Ref.:


REFO REFO REFO

Mode: Mode: Mode:


Normal Normal Normal

E 0FIN 500 mV/div 200 ms/div @TE 500 mV/div 2 ms/div %RFAGC 1 V/div 500 µs/div
#FE 500 mV/div %RFAGC 500 mV/div @TE 500 mV/div
9TIN 500 mV/div

Focus Search waveform Track Open waveform 1 Track Jump waveform

Ref.: Ref.: Ref.:


REFO REFO REFO

Mode: Mode: Mode:


TEST TEST TEST
F

DEH-P6000UB/XN/EW5
56
1 2 3 4
5 6 7 8

%RFAGC 1 V/div 500 µs/div %RFAGC 1 V/div 500 µs/div %RFAGC 1 V/div 2 ms/div A

@TE 500 mV/div @TE 500 mV/div @TE 500 mV/div


9TIN 500 mV/div 9TIN 500 mV/div 9TIN 500 mV/div

4 Tracks Jump waveform 10 Tracks Jump waveform 32 Tracks Jump waveform

Ref.: Ref.: Ref.:


REFO REFO REFO

Mode: Mode: Mode:


TEST TEST TEST
B

%RFAGC 1 V/div 200 ms/div ^LOUT 1 V/div 200 µs/div 1DSCSNS 5 V/div 500 ms/div
@TE 1 V/div &ROUT 1 V/div 28SNS 5 V/div
8CIN 1 V/div 312SNS 5 V/div
7SIN 2 V/div 4LOEJ 5 V/div
Search operation(Outter to Inner) Analog audio waveform 12 cm CD Eject operation

Ref.: Ref.: Ref.:


REFO AGND GND C

Mode: Mode: Mode:


Normal Normal Normal

1DSCSNS 5 V/div 500 ms/div 1DSCSNS 5 V/div 500 ms/div %RFAGC 1 V/div 500 µs/div
5CLCONT 5 V/div 28SNS 5 V/div 9TIN 1 V/div
4LOEJ 5 V/div 312SNS 5 V/div @TE 1 V/div
4LOEJ 5 V/div 0FIN 1 V/div
12 cm CD Eject operation 8 cm CD Eject operation Black dot(800 µm) during play
D

Ref.: Ref.: Ref.:


GND GND REFO

Mode: Mode: Mode:


Normal Normal Normal

*DP 1 V/div 50 ns/div *DP 2 V/div 50 ms/div *DP 2 V/div 50 ms/div


(DM 1 V/div (DM 2 V/div (DM 2 V/div
E

USB Play USB device inserting to USB connector. CD Play with USB(iPod) device connecting.

DEH-P6000UB/XN/EW5
5 6 7 8
57
1 2 3 4

A *DP 2 V/div 50 ms/div )CPRDY 2 V/div 10 s/div )CPRDY 2 V/div


(DM 2 V/div ⁄SDA 2 V/div ⁄SDA 2 V/div
¤SCL 2 V/div ¤SCL 2 V/div

ACC OFF with USB(iPod) device connecting. iPod Authentication Operation iPod Authentication Operation(zoom until 2 s)

DEH-P6000UB/XN/EW5
58
1 2 3 4
5 6 7 8

DEH-P6000UB/XN/EW5
5 6 7 8
59
1 2 3 4

11. PCB CONNECTION DIAGRAM


11.1 TUNER AMP UNIT
A

NOTE FOR PCB DIAGRAMS


?
1.The parts mounted on this PCB
include all necessary parts for
A TUNER AMP UNIT
several destination.
For further information for 150
respective destinations, be sure
to check with the schematic dia-
gram. WIRE REMOTE INPUT CORD ASSY
2.Viewpoint of PCB diagrams AUX IN 16 CN981 2
140 CN151
Connector Capacitor IP-BUS
CN101 1
15
B SIDE A 5 1
1
130 D153 C153
C981

D154 D155

SIDE B R152

P.C.Board Chip Part IC911

1
120
R156 R157

10
1
C152 C261 IC261 R262
L981
R928

5
D981
D921
110 Q901
C262

L951 D922 R933


L151

R151 C154 C155


E

C 100 D951
R954
R161 R162 C217
C913 Q951

L201
C102
R953 E D151
R951
D392 R952 C212

5
R102
90 D902
C911
Q102
IC101 R101
D152

1
C101
D901 R912
C104 L202
R911 R154
R103
80 L101 R153

C904
R155
C901
Q751 R158
R610

D751
70 USB
C451 C65
E

D
CN521
D451
5 1 R525
R751

60 C452 D522 D521


L521
R521 R523 IC501
1

C504 C
R522 R511
1 5

D502 R505 R502


C752
C501
50 C507

Q451
E Q452
R508
1

R509
R451 CN70
D 40 R823
C502
L501
R723

C707
CN701 Q561 R806
R721
R568
E Q821 R733
D822
10

D563 E
E

30 C567
D821
L451 IC780

R562

C568 C782

20
R567
L561 R822
R817 C821
C562
S801
R816

1
10 DETACH

F Y
0
10 20 30 40 50 60 70 80
A X
DEH-P6000UB/XN/EW5
60
1 2 3 4
5 6 7 8

?
SIDE A

Y IC351

2
RCA
10

CN301 5
1

1 B
Q301 C308
R314

1
R308 R317

R301
R302 R305

R307

C309
R315
R303
ANTENNA
C307 ANT401
R313 C305
C363 C304 C303
10
1

IC261 R262
5

D981 C362 C301 C306

1
C262
D982

L151
C302
D351

C154 C155 C215 R381 Y401


Q381

1
D352

C
1
R161 R162 C217 C214 C410

R360 Q351
L201 E
R362

5
L402
C212

R361

R359

L202 C381

10
C415

FM/AM TUNER UNIT


D381

R158 D931
D391
C931
C408

C651
D

100 95 90 85 80 L404
R525
15

L602
75
1

D651 R603
R649
5

70

R652
IC501 X601
10

C783 R653
65

C407
C605 IC601
5 IC651
15

60

R505 R502
20

55

20

L403
C507 R611
1
25

R650 IC641
30 35 40 45 50
5

R509
CN701 R728 R612
R641 R651
R723

C432
C707
15

R729 C434
R721
R726
R733
R408 E
R565
10

D562

Q801
1

E Q832
5

R832 BZ601
IC431
R833 Q831
L891 C831
1

R831
10

R822

C821
R821
1 5
C CN1950
CN801

FRONT F

70 80 90 100 110 120 130 140 150 160 170


A
DEH-P6000UB/XN/EW5
5 6 7 8
61
1 2 3 4

A TUNER AMP UNIT

> FU 301 (B,127,135) Fuse 3 A CEK1286 C361 C359

C313 FU301 1

R318
1
R321 R316 C364 C357
B C311
C312
R322
Q303 Q302 R310
C310

1
R304 C360 C353

1
R311
R312 R319
C356
R320 C355
C358
R309
R357
R356
C352
R306 R355

ZNR401 C354
C351
R353
R358
1 R351
R363

R352
R354
R206

C218

C L401
C220

15
R205
R208
R207 C219
C406 R209
C222 C223 C221

10
R203

20
R202 R210
R407 C416
C414 R201
IC201
R406 R416 C211
C205 C210
R405

5
C204 C209

25
C421 R404 C203 C208 R16
R932 C202 C207
R931
R403 C201 C206

1
R402 R159

C411 Q931
E

C420

R401
R409
C412
C156 R609
D C405 R601
C413
R602 L601
C402 R410
C601
R606
C419 R604
C403
R605
TESTIN C603
R415 C418

R414 C607
C404 C

R413 C417

R412
C604

C401 R411 PCL R732

C708
R722
Q401
1

Q402
R730
1

C431

E C70
C433 C895
R811
D801 R71

R71
R608 D805 D804 Q891
R815 C705
E

R893
R808 R807
R801 R892
R804 R805 C893
R813 Q892
R891
E

C891

1
C892

C802

170 160 150 140 130 120 110 100 90


A
DEH-P6000UB/XN/EW5
62
1 2 3 4
5 6 7 8

SIDE B

150
C359

C365
C160 C161

C103
R115
140
R113
R104
R105 1

R114
1 1 B
R106 C151
130

R111
C982 C914
R109

R110 120

C921
R107 R108 110
R927
E

Q101 R112 C912


R925 R923
R924 Q921
R926
R921
100 C
1

R208 C216
C219
R393
C213 R922
C223 C221
E

R210 R392

C211 R204
Q391 90
C210
R391
C209
C208 R160
C207 R165 C903 R902
C206 Q902
R903

80
1

C902

C751
70
C720
C753 D
C609
1
R607 C453
04 C523
R506 C522
IC521
Q752 C706 60
C506
1

C603
1

R510

C607 C521
C784 C505
R503

50
C709 C503 R501
R732
R725

D501
R724
C708
R722

Q823
R730

40
1

C570

C702 R731 E
C730 Q562
R710
1

R716
Q891
C705
C822 C569
30
E

R893 C701
R892 C566
C781
3 1 C564
C780 R566
Q892
E

20
1

L780
C891 IC561 R564
D561
C563
5

C565
Q822 R561 C561 R563
C801
E

10

Y F

0
00 90 80 70 60 50 40 30 20 10
X A
DEH-P6000UB/XN/EW5
5 6 7 8
63
F
E
B
A

D
C

64
B
B

1
1

KEYBOARD UNIT
11.2 KEYBOARD UNIT

SRC/OFF DISP/BACK/SCROLL S.Rtrv

2
2

1
1
1
40 S1904 S1909
S1907
IC1901

D1901 D1906 D1908


C1902 C1907
MULTI CONTROL C1909

5
30
V1901
10
S1906 1 5 10 15 20

20
C1903 C1908 C1910

DEH-P6000UB/XN/EW5
D1907 D1909
D1902

1
S1902 S1901 S1910 MUTE TA/NEWS

1
S1908
1 S1905
1

3
3

10 LIST
C1905
D1904

D1903
BAND/ESC RDM/iPod RPT/LOCAL
C1904 D1905 S1903
1

C1906
Y
0
10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160
X

4
4

SIDE A
B

F
C

D
A

65
B
SIDE B

8
8

CN1951
C

R1901 40
7

7
R1902 D1911
C1913

DEH-P6000UB/XN/EW5
R1938
C1917
R1936
C1918 R1946 R1937
1 5 11 R1934
D1912 R1945
L1901
C1916
30
R1910 R1905 CN1901 20 15
C1920
R1935
R1941 R1929
Q1902 R1925 R1922
R1942

E
R1920 R1952 R1916

C1915
R1918

C1912
R1913 R1908 IC1902 R1940
R1927
2 10
R1947
R1932 R1957 R1914 20

R1933
TH1901
R1949 1 5 10 R1930
1 R1931
R1944 R1953 R1921
R1948
R1924
R1917
R1950 X1901 C1914
C1901 R1928
R1903
D1913 R1926
R1919 C1919
R1923
10

R1911

R1909
R1912

R1904
R1907

R1906
6

6
Y
0
160 150 140 130 120 110 100 90 80 70 60 50 40 30 20 10
X
KEYBOARD UNIT

5
5

B
1 2 3 4

11.3 CD CORE UNIT(S10.5COMP2-iPod)

D CD CORE UNIT(S10.5COMP2-iPod) SIDE A

PICKUP UNIT(SERVICE)

A CN701

REF01
E
F

D
HOME

E
LOADING/CARRIAGE MOTOR
M

M
SPINDLE MOTOR

D
DEH-P6000UB/XN/EW5
66
1 2 3 4
5 6 7 8

D CD CORE UNIT(10.5COMP2-iPod) SIDE B

B
8EJ
12EJ

DSCSNS

D
DEH-P6000UB/XN/EW5
5 6 7 8
67
1 2 3 4

11.4 PANEL UNIT

A
C PANEL UNIT SIDE A

B CN1901

EJECT

C PANEL UNIT SIDE B

A CN801

C
DEH-P6000UB/XN/EW5
68
1 2 3 4
5 6 7 8

12. ELECTRICAL PARTS LIST


NOTE:
Parts whose parts numbers are omitted are subject to being not supplied. A

The part numbers shown below indicate chip components.


Chip Resistor
RS1/_S___J,RS1/__S___J
Chip Capacitor (except for CQS.....)
CKS....., CCS....., CSZS.....
The > mark found on some component parts indicates the importance of the safety factor of the part.
Therefore, when replacing, be sure to use parts of identical designation.
Meaning of the figures and others in the parentheses in the parts list.
Example) IC 301 is on the point (face A, 91 of x-axis, and 111 of y-axis) of the corresponding B

PC board.
IC 301 (A, 91, 111) IC NJM2068V
Circuit Symbol and No. Part No. Circuit Symbol and No. Part No.
Q 562 (B,30,33) Transistor RT3T22M
Unit Number : QWM3010 Q 751 (A,7,71) Transistor 2SD2396
Unit Name : Tuner Amp Unit Q 752 (B,23,58) Transistor RT3T22M
Q 801 (A,104,26) Transistor RT1N431M
Unit Number :
Q 821 (A,33,36) Transistor 2SD1767
Unit Name : Keyboard Unit Q 822 (B,74,13) Chip Transistor DTC114EUA
C
Q 823 (B,33,39) Transistor RT3T22M
Unit Number : CWM8758 Q 891 (B,97,28) Transistor 2SA1576A
Q 892 (B,93,21) Chip Transistor DTC114EUA
Unit Name : Panel Unit
Unit Number : CWX3526 Q 901 (A,7,105) Transistor 2SD2396
Q 902 (B,29,80) Transistor RT3T22M
Unit Name : CD Core Unit(S10.5COMP2-iPod) Q 921 (B,51,99) Transistor RT3CLLM
Q 931 (B,133,77) Chip Transistor DTC114EUA
Q 951 (A,51,96) Transistor 2SA1576A

A
Unit Number : QWM3010
D
D
D
153
154
155
(A,11,128) Diode
(A,8,128) Diode
(A,17,128) Diode
MALS068X
MALS068X
MALS068X D
Unit Name : Tuner Amp Unit D 351 (A,93,102) Diode 1SR139-400
D 352 (A,90,102) Diode 1SR139-400
MISCELLANEOUS
D 381 (A,140,77) Diode 1SS133
D 391 (A,135,70) Diode MC2848-11
IC 101 (A,43,89) IC HA12241FP
D 392 (A,17,91) Diode HZS9L(A2)
IC 201 (B,107,90) IC PML018A
D 501 (B,64,44) Diode RB060L-40
IC 351 (A,105,140) IC PAL007C
D 502 (A,49,49) Diode 1SR139-400
IC 431 (A,152,27) IC NJM2885DL1-33
IC 501 (A,68,61) Regulator IC BD9781HFP
D 521 (A,55,59) Diode MALS068X
D 522 (A,47,59) Diode MALS068X
IC 521 (B,51,57) IC R5523N001B
D 561 (B,49,17) Diode RB551V-30
IC 561 (B,39,19) IC NJM2360M
D 563 (A,24,29) Diode MTZJA10(B) E
IC 601 (A,117,55) IC PEG402A8
D 751 (A,15,69) Diode MTZJA8R2(B)
IC 651 (A,93,52) IC S-80835CNMC-B8U
IC 780 (A,54,29) IC NJM2885DL1-33
D 801 (B,111,31) Diode MC2850-11
D 804 (B,125,28) Diode MC2848-11
IC 911 (A,6,121) IC NJM2388F84
D 805 (B,130,28) Diode MC2846-11
Q 101 (B,44,106) Transistor 2SA1576A
D 821 (A,40,30) Diode MTZJA10(B)
Q 102 (A,35,88) Chip Transistor DTC114EUA
D 822 (A,40,33) Diode HZS7L(A3)
Q 302 (B,138,127) Transistor RT3C99M
Q 303 (B,162,129) Transistor RT3C99M
D 901 (A,17,83) Diode HZS6L(B1)
D 902 (A,17,87) Diode 1SR139-400
Q 351 (A,143,93) Chip Transistor DTC124EUA
D 921 (A,55,110) Diode HZS7L(A1)
Q 381 (A,139,100) Transistor RT3T22M
D 922 (A,58,104) Diode HZS7L(C3)
Q 391 (B,25,92) Transistor 2SC4081 F
D 931 (A,140,74) Diode 1SS133
Q 401 (B,131,42) Transistor UMH1N
Q 402 (B,122,41) Transistor UMH1N
D 951 (A,48,98) Diode MC2848-11
D 981 (A,75,109) Diode 1SR139-400
Q 561 (A,16,33) Transistor 2SD1858
DEH-P6000UB/XN/EW5
5 6 7 8
69
1 2 3 4
Circuit Symbol and No. Part No. Circuit Symbol and No. Part No.
D 982 (A,78,109) Diode 1SR139-400 R 305 (A,157,123) RS1/16S821J
ZNR401 (B,164,114) Surge Protector IMSA-6801-01Y901 R 306 (B,149,115) RS1/16S821J
L 101 (A,17,79) Inductor LAU2R2K R 309 (B,139,120) RS1/16S472J
R 310 (B,133,128) RS1/16S472J
A
L 201 (A,67,92) Ferri-Inductor LAU4R7K
L 202 (A,67,80) Ferri-Inductor LAU100K R 311 (B,167,128) RS1/16S472J
L 401 (B,156,98) Chip Coil LCTAW4R7J2520 R 312 (B,165,124) RS1/16S472J
L 402 (A,148,90) Inductor LAU1R0K R 315 (A,142,124) RS1/16S223J
L 403 (A,152,48) Inductor LAU1R0K R 316 (B,128,132) RS1/16S223J
R 317 (A,157,126) RS1/16S223J
L 501 (A,63,40) Inductor CTH1385
L 521 (A,51,56) Inductor CTF1713 R 318 (B,162,134) RS1/16S223J
L 561 (A,40,16) Inductor CTF1660 R 320 (B,142,123) RS1/16S0R0J
L 602 (A,85,60) Ferri-Inductor LAU100K R 321 (B,136,132) RS1/16S0R0J
L 891 (A,100,23) Ferri-Inductor LAU100K R 351 (B,117,110) RS1/16S0R0J
R 352 (B,119,111) RS1/16S0R0J
B L 951 (A,55,104) Inductor LAU2R2K
L 981 (A,32,108) Choke Coil 600 µH CTH1280 R 353 (B,122,111) RS1/16S0R0J
X 601 (A,101,54) Crystal Resonator 15.000 MHz CSS1653 R 354 (B,114,110) RS1/16S0R0J
S 801 (A,25,10) Switch(DETACH) CSN1039 R 359 (A,146,85) RS1/16S103J
>FU301 (B,127,135) Fuse 3 A CEK1286 R 360 (A,139,95) RS1/16S103J
R 361 (A,139,88) RS1/16S153J
BZ601 (A,137,24) Buzzer CPV1062
ANT401 (A,169,127) Antenna Jack CKX1056 R 362 (A,139,93) RS1/16S331J
> Fuse 10 A YEK5001 R 363 (B,107,113) RS1/16S0R0J
R 381 (A,143,102) RS1/16S102J
RESISTORS R 391 (B,25,87) RS1/16S223J
R 392 (B,22,92) RS1/16S683J
R 101 (A,51,88) RS1/16S472J
C R 102 (A,51,90) RS1/16S472J R 393 (B,25,94) RS1/16S683J
R 103 (A,41,82) RS1/16S102J R 401 (B,159,71) RS1/16S681J
R 104 (B,38,136) RS1/16S101J R 402 (B,156,79) RS1/16S681J
R 105 (B,38,134) RS1/16S620J R 403 (B,156,81) RS1/16S681J
R 404 (B,156,84) RS1/16S681J
R 106 (B,38,129) RS1/16S101J
R 107 (B,43,108) RS1/16S223J R 405 (B,156,86) RS1/16S681J
R 108 (B,39,107) RS1/16S472J R 406 (B,157,88) RS1/16S681J
R 109 (B,25,120) RS1/16S102J R 407 (B,157,90) RS1/16S681J
R 110 (B,27,121) RS1/16S223J R 408 (A,128,34) RAB4C223J
R 410 (B,152,65) RS1/16S0R0J
R 111 (B,29,122) RS1/16S181J
R 112 (B,40,106) RS1/16S222J R 411 (B,143,45) RS1/16S681J
D R 113 (B,28,136) RS1/16S181J R 412 (B,128,49) RS1/16S681J
R 114 (B,25,131) RS1/16S223J R 413 (B,133,51) RS1/16S681J
R 115 (B,30,138) RS1/16S102J R 502 (A,73,52) RS1/16S3302F
R 503 (B,75,51) RS1/16S333J
R 151 (A,49,102) RS1/16S102J
R 152 (A,41,123) RS1/16S102J R 505 (A,69,52) RS1/16S8201F
R 153 (A,63,78) RS1/16S103J R 506 (B,73,58) RS1/16S683J
R 154 (A,61,81) RS1/16S103J R 508 (A,67,47) RS1/16S8202D
R 159 (B,123,79) RS1/16S101J R 509 (A,70,47) RS1/16S6801F
R 511 (A,56,55) RS1/10SR471J
R 160 (B,85,84) RS1/16S101J
R 161 (A,67,100) RS1/16S223J R 525 (A,76,62) RS1/16S103J
R 162 (A,71,100) RS1/16S223J R 562 (A,40,24) RD1/4PU472J
E
R 165 (B,78,83) RS1/16S102J R 563 (B,31,16) RS1/16S102J
R 201 (B,119,89) RS1/16S102J R 564 (B,29,17) RS1/16S821J
R 565 (A,110,34) RS1/16S0R0J
R 202 (B,124,90) RS1/16S102J
R 203 (B,118,92) RS1/16S102J R 566 (B,33,22) RS1/10SR821J
R 204 (B,52,87) RS1/16S0R0J R 567 (A,31,17) RS1/16S1R0J
R 205 (B,119,97) RS1/16S101J R 568 (A,25,36) RD1/4PU681J
R 206 (B,103,106) RS1/16S101J R 603 (A,96,59) RS1/16S0R0J
R 604 (B,100,60) RS1/16S0R0J
R 207 (B,124,95) RS1/16S101J
R 208 (B,89,95) RS1/16S101J R 605 (B,123,57) RS1/16S104J
R 209 (B,118,94) RS1/16S101J R 606 (B,108,62) RS1/16S473J
F R 210 (B,91,91) RS1/16S101J R 607 (B,63,60) RS1/16S681J
R 303 (A,140,124) RS1/16S821J R 608 (B,137,29) RS1/16S102J
R 610 (A,65,72) RS1/16S104J
R 304 (B,131,127) RS1/16S821J
R 611 (A,97,49) RS1/16S104J
DEH-P6000UB/XN/EW5
70
1 2 3 4
5 6 7 8
Circuit Symbol and No. Part No. Circuit Symbol and No. Part No.
R 612 (A,109,42) RS1/16S222J C 152 (A,56,116) CKSRYB104K16
R 641 (A,129,43) RS1/16S104J
R 652 (A,91,57) RS1/16S822J C 154 (A,67,102) CKSRYB472K50
R 653 (A,94,57) RS1/16S102J C 155 (A,71,102) CKSRYB472K50 A
C 160 (B,16,140) CKSRYB103K50
R 710 (B,85,32) RS1/16S102J C 161 (B,12,140) CKSRYB103K50
R 716 (B,85,30) RS1/16S102J C 201 (B,118,81) CKSRYB105K10
R 721 (A,74,37) RS1/16S104J
R 722 (B,86,41) RS1/16S472J C 202 (B,123,83) CKSRYB105K10
R 723 (A,72,41) RS1/16S104J C 203 (B,118,84) CKSRYB105K10
C 204 (B,123,85) CKSRYB224K16
R 724 (B,84,42) RS1/16S472J C 205 (B,118,86) CKSRYB105K10
R 725 (B,83,43) RS1/16S104J C 206 (B,96,81) CKSRYB105K10
R 726 (A,96,36) RS1/16S221J
R 728 (A,96,42) RS1/16S221J C 207 (B,90,83) CKSRYB105K10
R 729 (A,96,37) RS1/16S221J C 208 (B,96,84) CKSRYB105K10
C 209 (B,90,85) CKSRYB105K10 B
R 730 (B,90,40) RS1/16S221J C 210 (B,96,86) CKSRYB224K16
R 731 (B,71,34) RS1/16S221J C 211 (B,90,88) CKSRYB105K10
R 733 (A,74,35) RS1/16S104J
R 751 (A,15,61) RD1/4PU561J C 212 (A,77,90) CEJQ100M25
R 801 (B,124,24) RS1/16S222J C 213 (B,81,92) CKSRYB104K16
C 214 (A,84,97) CEJQ470M16
R 804 (B,127,23) RS1/16S222J C 215 (A,106,102) CEJQ100M25
R 805 (B,114,25) RS1/16S222J C 216 (B,72,95) CKSRYB104K16
R 806 (A,40,36) RD1/4PU391J
R 807 (B,106,25) RS1/16S222J C 217 (A,77,97) CEJQ470M16
R 808 (B,111,25) RS1/16S473J C 303 (A,145,117) CEJQ4R7M35
C 304 (A,140,117) CEJQ4R7M35
R 811 (B,125,33) RS1/16S102J C 305 (A,153,119) CEJQ4R7M35 C
R 813 (B,108,25) RS1/16S222J C 306 (A,145,110) CEJQ4R7M35
R 815 (B,111,28) RS1/16S473J
R 816 (A,65,12) RS1/16S102J C 351 (B,117,116) CKSRYB474K10
R 817 (A,63,14) RS1/16S104J C 352 (B,119,117) CKSRYB474K10
C 353 (B,121,127) CKSRYB474K10
R 821 (A,83,17) RS1/16S472J C 354 (B,110,114) CKSRYB474K10
R 822 (A,78,16) RS1/16S1R0J C 355 (B,117,121) CKSQYB474K25
R 823 (A,40,39) RD1/4PU471J
R 831 (A,113,21) RS1/16S0R0J C 356 (B,120,122) CKSQYB474K25
R 891 (B,101,21) RS1/16S222J C 357 (B,121,131) CKSQYB474K25
C 358 (B,114,120) CKSQYB474K25
R 892 (B,96,25) RS1/16S102J C 360 (B,125,127) CKSQYB225K10
R 893 (B,94,28) RS1/16S473J C 361 (B,106,146) CKSRYB104K16 D
R 902 (B,12,83) RS1/16S822J
R 903 (B,34,80) RS1/16S222J C 362 (A,134,111) CEJQ100M25
R 911 (A,34,82) RS1/16S102J C 363 (A,134,117) CEJQ330M10
C 364 (B,124,131) CKSQYB225K10
R 912 (A,34,84) RS1/16S103J C 381 (A,141,81) CEJQ220M16
R 921 (B,46,97) RS1/16S104J C 403 (B,158,58) CKSQYB475K10
R 922 (B,49,93) RS1/16S104J
R 923 (B,45,101) RS1/16S104J C 404 (B,152,52) CKSRYB103K50
R 924 (B,68,100) RS1/16S103J C 405 (B,153,67) CKSRYB103K50
C 406 (B,147,94) CKSRYB103K50
R 925 (B,68,102) RS1/16S473J C 407 (A,154,55) CEJQ470M6R3
R 926 (B,58,99) RS1/16S473J C 408 (A,154,72) CEJQ470M10
E
R 927 (B,48,106) RS1/16S472J
R 928 (A,55,113) RD1/4PU102J C 410 (A,148,98) CEJQ101M16
R 931 (B,131,81) RS1/16S104J C 413 (B,158,65) CKSRYB223K50
C 417 (B,127,54) CCSRCH470J50
R 932 (B,135,82) RS1/16S103J C 420 (B,156,75) CCSRCH101J50
R 933 (A,64,104) RD1/4PU102J C 432 (A,150,38) CEJQ470M6R3
R 951 (A,53,92) RS1/16S102J
R 952 (A,50,93) RS1/16S472J C 434 (A,141,36) CEJQ1R0M50
R 954 (A,61,104) RD1/4PU153J C 501 (A,59,49) 150 µF/6.3 V CCH1781
C 502 (A,52,38) CEJQ221M16
CAPACITORS C 503 (B,74,47) CCSRCH221J50
C 504 (A,62,55) CKSRYB105K16
C 101 (A,43,85) CCSRCH101J50 F
C 102 (A,44,93) CCSRCH101J50 C 506 (B,69,57) CKSRYB103K50
C 103 (B,33,138) CKSRYB104K16 C 507 (A,68,49) CKSRYB104K16
C 104 (A,43,83) CKSRYB104K16 C 521 (B,54,53) CKSRYB104K16
C 522 (B,55,58) CKSRYB104K16
DEH-P6000UB/XN/EW5
5 6 7 8
71
1 2 3 4
Circuit Symbol and No. Part No. Circuit Symbol and No. Part No.
C 523 (B,60,60) CKSRYB103K50 X 1901 (B,103,15) Radiator 10.0 MHz CSS1577

C 562 (A,53,13) CEJQ470M25 S 1901 (A,24,12) Push Switch CSG1155


C 564 (B,40,23) CKSRYB223K50 S 1902 (A,9,12) Push Switch CSG1155
A
C 565 (B,45,15) CCSRCH331J50 S 1903 (A,156,7) Push Switch CSG1155
C 566 (B,30,25) CKSRYB104K16 S 1904 (A,9,40) Push Switch CSG1155
C 567 (A,30,28) CEJQ101M16 S 1905 (A,129,7) Push Switch CSG1155

C 568 (A,26,21) CEJQ470M16 S 1906 (A,40,25) Switch(MULTI-CONTROL) CSX1120


C 569 (B,21,29) CKSRYB104K16 S 1907 (A,24,40) Push Switch CSG1155
C 601 (B,115,63) CCSRCH101J50 S 1908 (A,115,7) Push Switch CSG1155
C 603 (B,97,57) CCSRCH220J50 S 1909 (A,59,40) Push Switch CSG1155
C 604 (B,101,48) CCSRCH180J50 S 1910 (A,59,12) Push Switch CSG1155

C 605 (A,88,53) CEJQ4R7M35 RESISTORS


C 607 (B,90,53) CKSRYB105K10
B C 609 (B,76,64) CKSRYB105K10 R 1901 (B,137,40) RS1/16S222J
C 651 (A,80,67) CEJQ2R2M50 R 1902 (B,137,38) RS1/16S222J
C 702 (B,85,35) CKSRYB152K50 R 1903 (B,121,12) RS1/16S473J
R 1904 (B,24,10) RS1/16S181J
C 705 (B,86,28) CKSRYB152K50 R 1905 (B,152,24) RS1/16S181J
C 720 (B,42,67) CKSRYB105K16
C 751 (B,45,69) CKSRYB104K16 R 1906 (B,28,10) RS1/16S181J
C 752 (A,36,51) CEJQ101M16 R 1907 (B,34,10) RS1/16S181J
C 753 (B,14,66) CKSRYB473K50 R 1908 (B,152,22) RS1/16S391J
R 1909 (B,26,10) RS1/16S221J
C 781 (B,58,24) CKSRYB103K50 R 1910 (B,155,24) RS1/16S221J
C 782 (A,55,21) CEJQ470M6R3
C 783 (A,82,55) CEJQ4R7M35 R 1911 (B,30,10) RS1/16S221J
C C 784 (B,84,52) CKSRYB105K10 R 1912 (B,32,10) RS1/16S221J
C 822 (B,35,29) CKSRYB472K50 R 1913 (B,155,22) RS1/16S391J
R 1914 (B,66,19) RS1/16S102J
C 893 (B,100,25) CKSRYB105K10 R 1916 (B,16,22) RS1/16S333J
C 901 (A,37,74) CEJQ470M16
C 902 (B,15,76) CKSRYB103K50 R 1917 (B,34,14) RS1/16S333J
C 903 (B,23,83) CKSRYB472K50 R 1918 (B,13,22) RS1/16S822J
C 904 (A,26,74) CEAT102M16 R 1919 (B,143,10) RS1/16S822J
R 1920 (B,69,21) RS1/16S103J
C 911 (A,27,87) CEJQ221M16 R 1921 (B,34,16) RS1/16S822J
C 912 (B,20,102) CKSRYB103K50
C 913 (A,16,97) CEJQ101M16 R 1922 (B,13,24) RS1/16S332J
C 914 (B,11,121) CKSRYB103K50 R 1923 (B,117,10) RS1/16S332J
D C 921 (B,48,109) CKSRYB104K16 R 1924 (B,48,15) RS1/16S332J
R 1925 (B,16,24) RS1/16S222J
C 931 (A,140,70) CEJQ1R0M50 R 1926 (B,66,10) RS1/16S222J
C 981 (A,50,125) 3 300 µF/16 V CCH1486
C 982 (B,60,120) CKSRYB104K16 R 1927 (B,69,20) RS1/16S103J
R 1928 (B,51,15) RS1/16S222J

B
Unit Number :
R
R
R
1929
1930
1931
(B,69,23)
(B,69,17)
(B,79,17)
RS1/16S103J
RS1/16S103J
RS1/16S682J
Unit Name : Keyboard Unit
R 1932 (B,79,19) RS1/16S3902F
R 1933 (B,76,20) RS1/16S6802F
MISCELLANEOUS R 1934 (B,82,30) RS1/16S392J
E
R 1935 (B,69,24) RS1/16S101J
IC 1901 (A,77,35) Remote IC GP1UX51RK R 1936 (B,64,32) RS1/16S103J
IC 1902 (B,103,22) IC PEG411A
Q 1902 (B,79,22) Transistor 2SC4081 R 1937 (B,68,31) RS1/16S2R2J
D 1901 (A,8,37) LED CL-197HB1-D(CDE) R 1938 (B,104,37) RS1/16S103J
D 1902 (A,8,15) LED CL-197HB1-D(CDE) R 1940 (B,94,21) RS1/16S473J
R 1941 (B,87,24) RS1/16S2202D
D 1903 (A,112,7) LED CL-197HB1-D(CDE) R 1942 (B,87,23) RS1/16S3002D
D 1904 (A,126,7) LED CL-197HB1-D(CDE)
D 1905 (A,149,7) LED CL-197HB1-D(CDE) R 1944 (B,99,16) RS1/16S473J
D 1906 (A,22,36) LED CL-197HB1-D(CDE) R 1945 (B,102,28) RS1/16S101J
D 1907 (A,22,16) LED CL-197HB1-D(CDE) R 1946 (B,112,31) RS1/16S102J
F R 1947 (B,91,21) RS1/16S101J
D 1908 (A,61,36) LED CL-197HB1-D(CDE) R 1948 (B,107,15) RS1/16S473J
D 1909 (A,61,16) LED CL-197HB1-D(CDE)
D 1913 (B,107,12) Diode 1SS355 R 1949 (B,111,15) RAB4C101J
L 1901 (B,88,29) Inductor CTF1617
DEH-P6000UB/XN/EW5
72
1 2 3 4
5 6 7 8
Circuit Symbol and No. Part No. Circuit Symbol and No. Part No.
R 1950 (B,107,13) RS1/16S154J S 905 (B,25,70) Switch(8EJ) CSN1068
R 1952 (B,59,21) RS1/16S102J
R 1953 (B,63,15) RS1/16S102J RESISTORS
R 1957 (B,69,18) RS1/16S103J A
R 101 (B,61,74) RS1/10SR2R4J
CAPACITORS R 102 (B,61,72) RS1/10SR2R4J
R 103 (B,61,71) RS1/10SR2R7J
C 1902 (A,8,35) CKSRYB104K16 R 104 (B,54,67) RS1/16SS222J
C 1903 (A,9,17) CKSRYB104K16 R 105 (B,45,58) RS1/16SS102J
C 1904 (A,111,7) CKSRYB104K16
C 1905 (A,125,7) CKSRYB104K16 R 107 (B,52,60) RS1/16SS105J
C 1906 (A,149,5) CKSRYB104K16 R 202 (A,27,33) RS1/16SS473J
R 203 (A,51,44) RS1/16S473J
C 1907 (A,22,35) CKSRYB104K16 R 204 (A,24,58) RS1/16SS221J
C 1908 (A,22,17) CKSRYB104K16 R 206 (B,10,27) RS1/16SS104J
C 1909 (A,61,35) CKSRYB104K16
C 1910 (A,61,17) CKSRYB104K16 R 210 (B,10,23) RS1/16SS102J B
C 1913 (B,69,35) CKSYF106Z10 R 214 (B,50,50) RS1/16SS472J
R 216 (B,49,49) RS1/16SS472J
C 1914 (B,99,14) CKSRYB103K50 R 221 (A,51,48) RS1/16SS103J
C 1915 (B,83,23) CKSRYB104K16 R 222 (A,51,46) RS1/16SS103J
C 1916 (B,82,29) CKSRYB104K16
C 1917 (B,101,33) CKSRYB224K16 R 223 (B,14,43) RS1/16SS473J
C 1918 (B,117,31) CKSRYB105K10 R 225 (A,51,50) RS1/16SS103J
R 226 (A,51,51) RS1/16SS393J
C 1919 (B,113,12) CKSRYB104K16 R 227 (B,48,52) RS1/16SS562J
C 1920 (B,83,26) CKSRYB103K50 R 228 (B,45,52) RS1/16SS122J

C
Unit Number : CWM8758
R
R
R
229
230
232
(B,47,54)
(B,22,25)
(B,46,52)
RS1/16SS472J
RS1/16SS0R0J
RS1/16SS122J
C

R 233 (B,26,59) RS1/16SS103J


Unit Name : Panel Unit R 234 (B,23,26) RS1/16SS473J

MISCELLANEOUS R 235 (A,26,59) RS1/16SS473J


R 237 (A,24,35) RS1/16SS151J
D 1970 LED CL220PGC R 240 (B,14,26) RS1/16S473J
S 1970 Push Switch(EJECT) CSG1112 R 241 (B,14,25) RS1/16SS103J
R 244 (B,22,55) RS1/16SS473J
RESISTORS
R 250 (B,25,52) RS1/16SS101J
R 1970 RS1/16S101J R 251 (B,22,51) RS1/16SS101J
R 252 (B,21,48) RS1/16SS101J D
R 1971 RS1/16S101J
R 1972 RS1/16S0R0J R 254 (A,26,64) RS1/16SS104J
R 255 (A,26,63) RS1/16SS104J
CAPACITORS
R 256 (A,26,62) RS1/16SS104J
C 1970 CKSRYB104K16 R 259 (A,28,66) RS1/16SS0R0J
R 261 (A,26,65) RS1/16SS104J

D
R 262 (A,30,60) RS1/16SS0R0J
R 263 (A,28,63) RS1/16SS0R0J
Unit Number : CWX3526
R 273 (B,19,48) RS1/16SS103J
Unit Name : CD Core Unit(S10.5COMP2-iPod) R 274 (B,18,51) RS1/16SS104J
R 275 (B,19,51) RS1/16SS104J
E
MISCELLANEOUS R 276 (B,20,51) RS1/16SS104J
R 277 (B,24,52) RS1/16SS103J
IC 201 (A,36,46) IC PE5611B
IC 205 (B,25,47) IC 341S2094 R 278 (B,27,51) RS1/16SS1003D
IC 301 (A,29,15) IC BA5839FP R 279 (B,23,52) RS1/16SS104J
Q 101 (B,58,70) Transistor 2SA1577 R 282 (A,30,61) RS1/16SS240J
Q 102 (B,49,58) Chip Transistor 2SB1689 R 283 (A,29,61) RS1/16SS240J
R 284 (B,30,63) RS1/16SS153J
Q 201 (B,27,54) Transistor 2SA1577
X 201 (A,23,38) Ceramic Resonator 16.934 MHz CSS1603 R 285 (B,28,63) RS1/16SS153J
X 204 (B,17,45) Oscillator 32.768 kHz CSS1735 R 289 (B,19,45) RS1/16SS0R0J
X 205 (B,34,63) Oscillator 48.000 MHz CSS1753 R 291 (B,43,62) RS1/16SS272J
S 901 (A,55,37) Switch(HOME) CSN1067 R 292 (B,25,43) RS1/16SS221J F
R 293 (B,27,52) RS1/16SS472J
S 903 (B,20,59) Switch(DSCSNS) CSN1067
S 904 (B,41,68) Switch(12EJ) CSN1068 R 294 (A,32,63) RS1/16SS471J

DEH-P6000UB/XN/EW5
5 6 7 8
73
1 2 3 4
Circuit Symbol and No. Part No. Circuit Symbol and No. Part No.
R 295 (B,55,64) RS1/16SS103J
R 307 (A,35,19) RS1/16SS183J C 703 (B,15,35) CCSSCH101J50
R 308 (A,38,19) RS1/16SS183J C 704 (B,12,36) CKSSYB102K50
R 309 (A,35,21) RS1/16SS183J C 711 (A,31,25) CKSSYB104K10
A

R 310 (A,38,22) RS1/16SS183J Miscellaneous Parts List


R 601 (B,30,31) RS1/16SS0R0J
R 602 (B,27,31) RS1/16SS0R0J
Pickup Unit(P10.5)(Service) CXX1942
R 606 (B,28,23) RS1/16S0R0J M 1 Motor Unit(SPINDLE) CXC7134
R 701 (B,12,37) RS1/16SS221J M 2 Motor Unit(LOADING/CARRIAGE) CXC4026

R 702 (A,24,56) RS1/16SS221J


R 708 (B,15,37) RS1/16S0R0J
R 712 (B,15,54) RS1/16SS0R0J
R 713 (B,15,53) RS1/16SS0R0J

B CAPACITORS

C 106 (B,57,67) CKSQYB475K6R3


C 202 (A,28,57) CKSSYB104K10
C 204 (A,24,59) CKSSYB103K16
C 205 (B,27,41) CKSQYB475K6R3
C 206 (A,23,41) CKSSYB104K10

C 207 (A,25,38) CKSRYB104K16


C 209 (B,36,35) CEVW220M6R3
C 210 (B,29,37) CKSSYB104K10
C 211 (A,28,35) CKSSYB104K10
C 212 (A,29,30) CKSRYB104K16
C
C 213 (A,46,39) CKSSYB104K10
C 214 (A,29,34) CKSSYB104K10
C 216 (A,51,52) CKSSYB332K50
C 217 (A,48,52) CKSSYB104K10
C 218 (A,50,52) CKSSYB473K10

C 219 (A,47,54) CKSSYB104K10


C 220 (A,48,54) CKSSYB182K50
C 221 (A,46,54) CKSSYB104K10
C 222 (B,46,54) CCSSCH560J50
C 223 (B,48,54) CCSSCH4R0C50

D C 224 (A,45,56) CKSSYB104K10


C 226 (A,42,59) CCSSCH680J50
C 227 (A,42,61) CCSSCH470J50
C 228 (B,41,62) CKSSYB103K16
C 229 (B,48,60) CKSSYB104K10

C 236 (A,50,58) CKSSYB104K10


C 239 (B,47,52) CCSSCH220J50
C 240 (A,38,61) CKSSYB104K10
C 243 (B,22,41) CKSQYB475K6R3
C 250 (A,52,48) CKSSYB102K50

C 251 (A,52,46) CKSSYB102K50


E
C 260 (A,28,61) CKSSYB104K10
C 261 (B,34,67) CCSSCH8R0D50
C 262 (B,32,66) CCSSCH8R0D50
C 290 (B,22,43) CKSSYB104K10

C 291 (B,17,42) CCSSCH5R0C50


C 292 (B,17,48) CCSSCH5R0C50
C 293 (B,44,61) CKSSYB102K50
C 294 (B,25,41) CKSSYB103K16
C 295 (B,56,61) CKSQYB106K6R3

C 296 (B,56,63) CKSQYB106K6R3


F C 303 (A,36,19) CKSSYB472K25
C 304 (A,36,21) CKSSYB223K16
C 307 (A,22,11) CKSRYB104K16
C 308 (B,11,18) CKSRYB105K10

DEH-P6000UB/XN/EW5
74
1 2 3 4

You might also like