Sinodrills SDA (V2020
Sinodrills SDA (V2020
Sinodrills SDA (V2020
www.
SELF-DRILLING ANCHOR STSTEM
TABLE OF CONTENTS
Soil nailing
Our Qualification
ISO 9001:2008
CE certificate
Nut
Plate
Anchor bar
Anchor coupler
Anchor bit
3 Fast drilling and installation, because drilling, installation and grouting are in a
single operation.
The hollow core not only serves for flushing during drilling, but also for
4 grouting after drilling.
5 Continuous threads ensure the bars can be cut and coupled at any point, or
extended.
Incoming Quality Control: To make sure We regularly take samples at random from
all raw materials are qualified for the SGS our production lines to send to SGS for
IQC products production. laboratory testing
In-process Quality Control: To detect and We regularly take samples at random from
handle all problems that may arise during ITS our production lines to send to ITS for
IPQC the manufacturing process. laboratory testing. (ITS is INTERTEK)
Outgoing Quality Control: To ensure the We can also offer the samples to any other
products are defect-free before shipping Others third party inspection agencies as per
OQC to customers. customers’ request.
Anchor Coupler
Anchor coupler
Hexagonal nut
Size SW (mm) L(mm) Unit weight (kg)
R25 41 41 0.30
R32 46 45 0.35
R32 46 65 0.45
R38 50 60 0.50
R51 75 70 1.55
T76 100 80 2.80
Spherical nut
Size SW(mm) L(mm) Unit weight (kg)
R32 46 45 0.45
R38 50 50 0.60
R51 75 70 1.60
T76 100 90 3.20
T30 46 35 0.42
T40 65 50 0.90
T52 80 70 2.20
T73 95 70 2.20
T103 125 80 3.40
T127 140 140 9.20
Anchor Bit
Bit type
Bit selection
EX All steel cross bit for loose to medium dense ground formations.
ES Hardened button bit for weak cemented soil/sands and weak fractured rock formations.
EW Clay bits for soft clay and soils.
EC Hardened arch bit for loose to dense soil or sand formations.
EY Hardened 3 cutters bit for weak cemented soil/sand and weak fractured rock formations.
EXX TC cross bit for medium to strong fractured rock formations.
ESS TC button bit for strong fractured rock formations.
ECC TC arch bit for medium fractured rock formations.
EYY TC 3 cutters bit for medium fractured rock formations.
Bit matrix
Dia. 42 51 76 90 100 115 130 150 175 220 250 280 300 350
R25 √ √
R32 √ √ √ √
R38 √ √ √ √ √
R51 √ √ √ √ √ √
T76 √ √ √ √ √
T30 √ √
T40 √ √ √ √
T52 √ √ √ √ √ √
T73 √ √ √ √
T103 √ √ √ √ √ √
Centralizer
Size Out diameter(mm) Unit weight(kg)
R32 72 0.30
R38 78 0.30
R51 91 0.30
T76 130 1.00
T30 70 0.25
T40 88 0.45
T52 112 1.20
T73 130 1.40
T103 165 3.00
Auxiliary Accessories
Bit Adapter:
Drill bit adapter is used for connecting smaller threaded hollow bars and bigger
threaded drill bits.
Hollow bar size Drill bit size Length (mm) Unit weight (kg)
R25 R32 50 0.10
R32 R38 50 0.12
R32 R51 70 0.65
R38 R51 70 0.40
R51 T76 65 1.00
T30 T40 60 0.30
T40 T52 60 0.35
T52 T73 85 1.30
T73 T103 105 3.10
Shank Rod:
Shank rod is used for transferring the rotation and percussion from the rock drill to the self-drilling
anchor bar system, usually hexagonal shank rod is equipped with pneumatic rock drill.
Adaptor Coupling:
Adaptor coupling is used to connect self-drilling anchor to shank adaptor, all
adaptor couplings are heat treated for longer service life.
Wedges and wedge discs are the spare parts for adjusting angles to suite the structural requirement,
they are usually installed or welded with the plate.
In order to reduce the corrosion rate and thus increasing the service life, Sinodrills offer hot-dip
galvanized systems. A complete hot-dip galvanized system is usually including hollow bar, coupler,
nut and plate. All hot-dip galvanized items confirm to following standards:
For some permanent projects, especially for some underground projects, duplex coating system are
necessary. Just as its name implies, duplex coating system adopts two anti-corrosion measurements,
they are hot-dip galvanizing and epoxy coating. Sinodrills duplex coating systems conform to
following standards:
Hot-dip galvanized zinc coating thickness ( μm ) Epoxy layer thickness ( μm )
≥70 ≥60
Hot-dip galvanizing standard Epoxy coating bending standard
ISO 1461 ISO 1519
Epoxy coating impact standard Epoxy coating adhesion standard
ASTM D2794 ISO 2409
Processing Images