Features: Surface Mount Glass Passivated Single Phase Bridge Rectifier Reverse Voltage 1400V Ountput Current 2.0A

E91209A
Surface Mount Glass Passivated Single Phase Bridge Rectifier

Reverse Voltage 1400V Ountput Current 2.0A
Features
• Glass passivated Bridge Rectifiers

• Ideal for automated placement
• Very low profile - max height 1.2 mm
• High surge current capability
• Moisture sensitivity: level 1, per J-STD-020
• High temperature soldering guaranteed: 260℃/10 seconds
case: E91
Mechanical Data
• Case:E91,Molding compound meets UL 94V-0 flammability rating
• Terminals:Matte tin plated leads,solderable per MIl-STD-750 Method 2026,J-STD-002 and JESD22-
B102
Typical Applications
General purpose use in ac-to-dc bridge full wave rectification for TV,Monitor,SMPS,Adapter,
Printer,Audio equipment,and Home Applications application
Maximum Ratings (TA = 25 °C unless otherwise noted)
Parameter Symbol E91209A Unit
Maximum repetitive peak reverse voltage VRRM 1400 V

Maximum RMS voltage VRMS 980 V
Maximum DC blocking voltage VDC 1400 V
Maximum average output rectified current Io(AV) 2.0 A
Peak forward surge current 8.3 ms single half

IFSM 55 A
sine-wave superimposed on rated load
Rating for fusing (t≤8.3ms) I2t 13 A2s

TJ,
Operating junction and storage temperature range 150 °C
TSTG
Electrical Characteristics (TA = 25 °C unless otherwise noted)
Parameter Test Conditions Symbol E91209A Unit
Maximum instantaneous IF=1.0A 1.0

VF Volts
forward voltage IF=2.0A 1.1
Maximum DC reverse TA=25℃ 5.0

current at rated DC blocking IR µA
voltage TA=125℃ 100
Typical junction capacitance 4.0 V, 1 MHz CJ 15 pF
www.goodark.com 1/4 2015.12-Rev.A

E91209A
Thermal Characteristics (Ta=25℃ unless otherwixe noted)
Parameter Test Conditions Symbol E91209A Unit

1)
Typical thermal resistance juntion to ambient RθJA 45
1)
juntion to case RθJC 12.6
℃/W
2)
juntion to ambient RθJA 29.8
2)
juntion to case RθJC 8.4
Note:1), The thermal resistance from junction to ambient and case, mounted on glass epoxy FR-4 P.C.B with recommended copper pads
2), The thermal resistance from junction to ambient and case, mounted on glass epoxy FR-4 P.C.B with 13*13mm copper pads
Ratings and Characteristics Curves

(TA = 25℃ unless otherwise noted)
Figure 1.Forward Current Derating Curve Figure 2.Maximum Non-Repetitive Peak Forward
Surge Current
Pulse width=0.3ms
Figure 3. Typical Instantaneous Forward Figure 4. Typical Reverse Characteristics

Characteristics

E91209A
Package Outline Dimensions
Mounting Pad
layout,unit:mm
(Unit:mm)
Dim Min Nom. Max Dim Min Nom. Max

A 1.10 1.17 1.20 L3 5.7 5.9 6.1
C 0.20 0.25 0.35 L4 0.6 0.80 1
D 8.3 8.4 8.6 L5 1.4 1.6 1.8
HE 10.0 10.2 10.4 P1 3.0 REF
E 9.1 9.30 9.5 P2 7.4 REF
E1 5.28 REF P3 3.1 REF
L1 1.4 1.60 1.80 P4 3.68 REF
L2 1.0 1.2 1.4

E91209A
Disclaimers
These materials are intended as a reference to assist our customers in the selection of the Suzhou
Good-Ark product best suited to the customer’s application; they do not convey any license under any
intellectual property rights, or any other rights, belonging to Suzhou Good-Ark Electronics Co., Ltd.or a
third party.
Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, or infringement of
any third-party ’ s rights, originating in the use of any product data, diagrams, charts, programs,
algorithms, or circuit application examples contained in these materials.
All information contained in these materials, including product data, diagrams, charts, programs and
algorithms represents information on products at the time of publication of these materials, and are
subject to change by Suzhou Good-Ark Electronics Co., Ltd. without notice due to product
improvements or other reasons. It is therefore recommended that customers contact Suzhou Good-Ark
Electronics Co., Ltd. or an authorized Suzhou Good-Ark Electronics Co., Ltd. for the latest product
information before purchasing a product listed herein. The information described here may contain
technical inaccuracies or typographical errors. Suzhou Good-Ark Electronics Co., Ltd. assumes no
responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. Please also
pay attention to information published by Suzhou Good-Ark Electronics Co., Ltd. by various means,
including our website home page.
(http://www.goodark.com)
When using any or all of the information contained in these materials, including product data, diagrams,
charts, programs, and algorithms, Please be sure to evaluate all information as a total system before
making a final decision on the applicability of the information and products. Suzhou Good-Ark
Electronics Co., Ltd. assumes no responsibility for any damage, liability or other loss resulting from the
information contained herein.
The prior written approval of Suzhou Good-Ark Electronics Co., Ltd. is necessary to reprint or reproduce
in whole or in part these materials.
Please contact Suzhou Good-Ark Electronics Co., Ltd. or an authorized distributor for further details on
these materials or the products contained herein.

Features: Surface Mount Glass Passivated Single Phase Bridge Rectifier Reverse Voltage 1400V Ountput Current 2.0A

Uploaded by

Copyright:

Available Formats

Features: Surface Mount Glass Passivated Single Phase Bridge Rectifier Reverse Voltage 1400V Ountput Current 2.0A

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Features: Surface Mount Glass Passivated Single Phase Bridge Rectifier Reverse Voltage 1400V Ountput Current 2.0A

Uploaded by

Copyright:

Available Formats

E91209A

Surface Mount Glass Passivated Single Phase Bridge Rectifier

• Glass passivated Bridge Rectifiers

Maximum Ratings (TA = 25 °C unless otherwise noted)

Parameter Symbol E91209A Unit

Maximum repetitive peak reverse voltage VRRM 1400 V

Peak forward surge current 8.3 ms single half

Rating for fusing (t≤8.3ms) I2t 13 A2s

Electrical Characteristics (TA = 25 °C unless otherwise noted)

Parameter Test Conditions Symbol E91209A Unit

Maximum instantaneous IF=1.0A 1.0

Maximum DC reverse TA=25℃ 5.0

Typical junction capacitance 4.0 V, 1 MHz CJ 15 pF

www.goodark.com 1/4 2015.12-Rev.A

Thermal Characteristics (Ta=25℃ unless otherwixe noted)

Parameter Test Conditions Symbol E91209A Unit

Ratings and Characteristics Curves

Figure 3. Typical Instantaneous Forward Figure 4. Typical Reverse Characteristics

www.goodark.com 2/4 2015.12-Rev.A

Package Outline Dimensions

Dim Min Nom. Max Dim Min Nom. Max

www.goodark.com 3/4 2015.12-Rev.A

www.goodark.com 4/4 2015.12-Rev.A

You might also like