Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Download as pdf or txt
Download as pdf or txt
You are on page 1of 1

SHANGHAI SUNRISE ELECTRONICS CO., LTD.

US2AA THRU US2MA


SURFACE MOUNT ULTRA TECHNICAL
FAST SWITCHING RECTIFIER SPECIFICATION
VOLTAGE: 50 TO 1000V CURRENT: 2.0A
FEATURES SMA/DO-214AC
• Ideal for surface mount pick and B
place application
• Low profile package A C
• Built-in strain relief
• High surge capability
D
• Glass passivated chip
• Ultra fast recovery for high efficiency F
• High temperature soldering guaranteed:
260oC/10sec/at terminal G H

MECHANICAL DATA A B C D
• Terminal: Plated leads solderable per MAX. .110(2.79) .177(4.50) .058(1.47) .012(0.305)
MIN. .100(2.54) .157(3.99) .052(1.32) .006(0.152)
MIL-STD 202E, method 208C E F G H
• Case: Molded with UL-94 Class V-O MAX. .208(5.28) .090(2.29) .008(0.203) .060(1.52)
MIN. .194(4.93) .078(1.98) .004(0.102) .030(0.76)
recognized flame retardant epoxy
• Polarity: Color band denotes cathode Dimensions in inches and (millimeters)

MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS


(Single-phase, half-wave, 60Hz, resistive or inductive load rating at 25oC, unless otherwise stated, for capacitive load,
derate current by 20%)
US2 US2 US2 US2 US2 US2 US2
RATINGS SYMBOL UNITS
AA BA DA GA JA KA MA
Maximum Repetitive Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 V
Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 V
Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000 V
Maximum Average Forward Rectified Current
IF(AV) 2.0 A
(TL=90oC)
Peak Forward Surge Current (8.3ms single IFSM 50 A
half sine-wave superimposed on rated load)
Maximum Instantaneous Forward Voltage VF 1.0 1.4 1.7 V
(at rated forward current)
Maximum DC Reverse Current Ta=25oC IR
5.0 µA
(at rated DC blocking voltage) Ta=100 C
o
350 µA
Maximum Reverse Recovery Time (Note 1) trr 50 75 nS
Typical Junction Capacitance (Note 2) CJ 25 pF
20 o
Typical Thermal Resistance (Note 3) Rθ(ja) C/W
-50 to +150 o
Storage and Operation Junction Temperature TSTG,TJ C
Note:
1.Reverse recovery condition IF=0.5A, IR=1.0A,Irr=0.25A.
2.Measured at 1.0 MHz and applied voltage of 4.0Vdc
3.Thermal resistance from junction to terminal mounted on 5×5mm copper pad area
http://www.sse-diode.com

You might also like