Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd
Upload
60 views

SAS Syllabus

This document provides an overview of the PEINA 2101 A Safety and Automation Systems course. The course aims to make students aware of basic concepts of safety instrumented systems, standards, and risk analysis techniques. It covers six units: introduction to safety instrumented systems; the safety life cycle; determining safety integrity levels through risk analysis methods; technology selection for safety systems; reliability of safety instrumented systems; and a case study applying the safety life cycle. Students will learn to differentiate between process control and safety control, identify process hazards, select appropriate safety integrity levels, and analyze safety system performance and reliability.

Uploaded by

Swati Madhe
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
60 views

SAS Syllabus

This document provides an overview of the PEINA 2101 A Safety and Automation Systems course. The course aims to make students aware of basic concepts of safety instrumented systems, standards, and risk analysis techniques. It covers six units: introduction to safety instrumented systems; the safety life cycle; determining safety integrity levels through risk analysis methods; technology selection for safety systems; reliability of safety instrumented systems; and a case study applying the safety life cycle. Students will learn to differentiate between process control and safety control, identify process hazards, select appropriate safety integrity levels, and analyze safety system performance and reliability.

Uploaded by

Swati Madhe
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 1

PEINA 2101 A Safety and Automation Systems

Teaching Scheme Examination Scheme


Lecture: 3 Hrs/Week In Sem: 50 Marks
End Sem: 50 Marks
Credit: 3

Course Objectives:
1. To make the students aware of basic concepts of safety instrumented system,
2. To make the students aware of standards
3. To make the students aware of risk analysis techniques.

Course Outcomes: The student will be able to


1. Differentiate between process control and safety control and identify the role of safety
instrumented system in the industry.
2. Identify and analyse the process hazards.
3. Select the Safety integrity level.
4. Analyze the performance of different logic system technologies and field devices with
optimum risk levels.

Unit I: Introduction [6 Hrs]


Safety Instrumented System (SIS) - need, features, components, difference between basic
process control system and SIS, Risk: how to measure risk, risk tolerance, Safety integrity
level, safety instrumented functions, review of Standards and Regulations related to Safety,

Unit II: Safety Life Cycle [6 Hrs]


Hazard and risk analysis, allocation of safety functions to protective layers, develop safety
requirements specification, SIS design & engineering, installation commissioning and
validation, operations and maintenance, modifications, decommissioning.

Unit III: Determining the Safety Integrity Level (SIL) [6 Hrs]


Evaluating Risk, Safety Integrity Levels, SIL Determination Method: As Low As Reasonably
Practical (ALARP), Risk matrix, Risk Graph, Layers of Protection Analysis (LOPA)

Unit IV: Technology Selection [6 Hrs]


Covers the safety requirements specification (SRS) and the pros and cons of pneumatic, relay
and microprocessor logic systems, PLC systems for safety system development. Issues
Relating to Field Devices: importance of field devices: impact of field devices such as
sensors, final elements on system performance.

Unit V: Reliability of SIS [6 Hrs]


Covers reliability issues and helps make sense of the minimum hardware fault tolerance
requirement, Likelihood analysis: estimation and statistical analysis, fault propagation, event
tree analysis and fault tree analysis, Quantitative layer of protection analysis: multiple
initiating events, estimating initiating event frequencies and IPL failure probabilities

Unit VI: Case Study [6 Hrs]


The safety life cycle and its importance, furnace/fired heater safety shutdown system, scope
of analysis, define target SILs, develop safety requirement specification (SRS), SIS
conceptual design, lifecycle cost analysis, verification of SIL satisfaction, detailed design,
installation, commissioning and pre-start-up tests, operation and maintenance procedures.

Reference Books:
1. Paul Gruhn and H Jarry L. Cheddie, “Safety Instrumented systems: Design, Analysis and
Justification”, ISA, 2 nd edition, 2006.
2. Dr. Eric W Scharpf, Heidi J Hartmann, Harlod W Thomas, “Practical SIL target selection:
Risk Analysis per the IEC 61511 Safety Lifecycle”, exida, 2012.
3. Ed Marszal, Eric W Scharpf, “Safety Integrity Level Selection”, ISA.

You might also like