LIST OF EDD DESCRIPTION/ SPECIFICATION

UPDATE: SEPTEMBER 2021

No Description/ Specification (valid) Dated Amendment

March,
1 EDD 1:2008 11/0.415 kV Distribution Transformer, Oil Filled 1
2008
The Galvanization of Iron and Steel, Articles Other Than
2 ED 2:1987 -
Steel Wire
3 ED 7 :1989 6.35 / 11kV XLPE Insulated Cables 1
EDD 8:2011
4 0.6/1kV XLPE Insulated Cables 1
Version 1.9
5 ED 14 :1984 11 kV Pole-mounted Air Breaker Switch-disconnector -

6 ED 15 :1991 11 kV & LV Bare Copper Conductor for Overhead Line -

7 ED 20 :1989 6.35/ 11 kV Heat-Shrink Termination And Accessories 2&4

8 ED 21 :1989 6.35/ 11 kV Heat-shrink Joints and End Seals 2&3

9 ED 22 :1988 0.6 /1 kV Heat-shrink Termination and Accessories -

10 ED 23 :1989 0.6 /1 kV Heat-shrink Joints and End Seals -

11 ED 26 :1991 Pole-mounted Distribution Transformer (Mineral Oil) 1

12 ED 31 :1989 11 kV and LV PVC Covered Overhead Conductor 1

ED 2001-
13 Enclosed Distribution Panel for Streetlighting 1, 2, & 3
1284
ED 2002-85
14 Pre-wired Control Gear on Trays -
(S-4139 A)
ED/SL/C/10
15 Street Lighting Column and Brackets -
(S-4039 A)
EDD 1001- PVC Insulated and Sheathed Flat Twin 2×35 SQ.MM
16 -
1184 :2006 Copper Cable
EDD 721-0-0 Classification of Service Condition for Supply of Equipment
17 1
:2020 / Materials
18 S-3013 D Cutout for Street Lighting -

19 S-3015 D Metal Enclosed 1 kV ACB/ MCCB -

PECU (Photoelectric for Control Unit) Assembly for Street
20 S-3016 D -
Lighting
21 S-4003 C Line Tap -

22 S-4019 C House Service Dumb-Bell Assembly -

23 S-4021 F Caution/ Warning tape 1

24 S-4022 E 6.35/ 11 kV Pole Mounting Heat-shrink Termination -

25 S-4023 C 0.6/1 kV Pole Mounting Heat shrink Termination -

Lightning Arresters for Application on the 11 kV Overhead
26 S-4025 H 1
Line System
27 S-4031 I Low Voltage Cast Resin Joints for Distribution Cables -

PAGE 1 OF 4
 LIST OF EDD DESCRIPTION/ SPECIFICATION
UPDATE: SEPTEMBER 2021

NO Description/ Specification Amendment

28 S-4032 D Metallic Mechanical Cable Glands for 0.6/1 kV Armoured XLPE Insulated Cable 1

29 S-4035 L 11 kV Sulphur Hexafluoride (SF6) Ring Main Switchgear 1

S-4039
30 Octagonal Tapered Street Lighting Columns -
ED/SL/C/10
31 S-4044 B Innards for Cut-out -

32 S-4045 A 11 KV Air Break Switch Disconnector -

33 S-4051 G Cut-out, Insulated Domestic Service 1

34 S-4052 D 11/ 0.4 kV Distribution Transformer Silicone Liquid Filled 5

35 S-4055 F 11 kV Kiosk Substation (Mineral Oil) 6

36 S-4063 B 11 KV Fault Passage Indicator -

37 S-4069 C 11 KV Pin Insulator -

38 S-4076 A Stirrup Binding-In -

39 S-4082 B Insulator Coach Screw -

40 S-4083 E LV (1 kV) Distribution Fuse Board & Cabinet 1

41 S-4084 F Distribution Fuse -

42 S-4086 B Stay Rod -

43 S-4089 D PVC Pipe (Duct), Unplasticised -

44 S-4095 B 6.35/11kV Beam Insulator -

45 S-4097 F Copper Clad Earth Rod and Accessories -

46 S-4102 D Ring Type Current Transformer for Metering 1

47 S-4103 D Current Limiting Fuse-Link (Domestic) 1

48 S-4104 D Fuse Carrier -

49 S-4123 A Heat Shrink Wrap Around Repair Kit -

50 S-4124 D 11 kV Oil Switch -

51 S-4125 B 0.6/1kV PVC/PVC Insulated Single Core cable -

52 S-4132 C Low Voltage Pole Mounted Fuses -

53 S-4133 B Coupling, Bus-bar, Assembly -

54 S-4134 B End Cap, Busbar, Assembly -

PAGE 2 OF 4
 LIST OF EDD DESCRIPTION/ SPECIFICATION
UPDATE: SEPTEMBER 2021

NO Description/ Specification Amendment

55 S-4135 E 11 kV (SF6)/ Vacuum Circuit Breaker Unit 2, 3, 4, 5, & 6

56 S-4136 C Channel, Cable Protection P.M. Type -

57 S-4141 C Fuse-Link HRC 12 kV Oil Tight Type II -

58 S-4142 E Indoor / Outdoor Cut-out for XLPE Cable 2&3

59 S-4143 A 11 kV Current Limiting Fuse Link for SF6 RMU

60 S-4144 C Gland Kit for Indoor / Outdoor Terminations Of 11 kV XLPE Insulated Cable 1

61 S-4146 E Compression Connectors and Compression Cable Sockets 5

62 S-4148 A 400V, Three Phase MCCB for Service Connections -

63 S-4149 C Ladder, Linesman’s Wooden -

64 S-4150 C 6.35/11 kV XLPE/EPR Insulated Submarine Cable and Accessories -

65 S-4205 A Pole Mounting Bracket for Lighting Arrester -

67 S-4206 B Gasket Material for Transformer and Switchgear -

68 S-4207 A Wood Battens -

69 S-4210 B 6.35/11 kV XLPE INSULATED SINGLE CORE CABLES 1&2

70 S-4211 C 6.35/1 1kV Heat-Shrink Terminations And Accessories For Single Core Cables 1

71 S-4212 A Silicone Liquid FOR Distribution Transformers -

72 S-4213 A Mechanical Connector and Cable Socket -

73 S-4214 A 6.35/11 kV Heat-Shrink Joints & End Seals For Single Core Cables -

74 S-4216 D Temperature Control Equipment for FB Sub-station (Fan) -

75 S-4218 B ACB, 415 V, Withdrawable Type -

76 S-4228 E Fire Rated Steel Door For Free Building / Precast Building Substation 1, 2, 3 & 4

77 S-4232 B Grip, Guy, Dead End -

78 S-4233 B Feeder Pillar Steel Enclosure 1

79 S-4235 C Louvered Steel Vent for Distribution Substation 1

80 S-4244 A Street Lighting High Mast -

81 S-4245 A Earth Leakage Circuit Breaker -

82 S-4246 A Demotic Meter Cabinet -

PAGE 3 OF 4
 LIST OF EDD DESCRIPTION/ SPECIFICATION
UPDATE: SEPTEMBER 2021

NO Description/ Specification Amendment

83 S-4248 B Moulded Case Circuit Breaker in Enclosure for Service Connections 1

84 S-4250 A Smart Electricity Meters for tariff and billing purposes 3

85 S-4251 A Smart Electricity Meters for tariff and billing purposes with prepayment facility -

86 S-4254 A Capacitor Panels to improve power factor in electrical distribution substations -

87 S-4256 A Automatic Transfer Panel with withdrawable Air Circuit Breakers -

88 S-6000 B Mini Distribution Pillar -

89 S-6002 A 11kV Kiosk Substation (Mineral Oil 1500 kVA) 4

90 S-6020 A LED Street Lighting Luminaires for use in Roadway and Residential Areas 1

91 S-6022 A 6.35/11KV Pre-Mold Joint & Termination -

PAGE 4 OF 4