HC 00 E

HCR9
HCR900 E
Drill faster and straighter ■ Sliding suction cap can be raised to allow a fast visual check of operation.
with the patented HD 709 drifter. ■ Stable chassis – combining a low center of gravity, high ground clearance
and protected undercarriage – enhances stability and confidence when
The Furukawa HD 709 Series drifter is designed to minimize drill noise and
tramming and drilling on rough terrain.
vibration without sacrificing performance. Incorporating a new piston design,
■ Walk-around, ground-level maintenance provides fast, easy upkeep or
the HD 709 drifter maximizes energy transmission and drills effectively in a
repair. Hinged service doors provide easy access to required areas.
variety of rock types.

■ Dual dampening system consistently keeps the bit against the rock, ensuring
efficient energy transfer and straighter holes. The system automatically tunes
the drifter for maximum performance regardless of the rock condition.
■ Integrated Drilling System incorporates all-hydraulic controls for
automatic adjustment of impact and feed force to accommodate changing rock
conditions. A reactive dampening control system regulates pressure based on
rock hardness, providing superior drilling performance.
■ Compact valve design, positioned close to the piston, provides
rapid valve and piston response for enhanced efficiency. Combining performance and economy.
The HCR 900 is ideal for demanding site preparation applications. Simple, durable
and efficient, the HCR 900 ES and the HCR 900 ES20 incorporate a self-adjusting
Maximize operator performance with the drill system designed to maximize drilling efficiency through to the bottom of the
ultimate in drilling technology. hole. By automatically controlling the impact force, feed force, rotation force and
■ Ergonomically designed to minimize operator fatigue. dual dampener pressure, the HCR 900 continuously adapts to the changing rock
■ Single-lever drilling controls allow easy operation of the drifter. conditions. As a result, drilling performance and the life of the drill tools are
increased, while lowering fuel consumption.
■ Engine, compressor and hydraulic oil temperature gauges are highly visible,
allowing the operator to monitor machine functions while
remaining focused on the drilling.

CATERPILLAR and CAT are registered trademarks of Caterpillar Inc.

■ Extension boom increases drilling pattern flexibility.
■ Design versatility allows for drilling either horizontally or vertically.
■ High-output compressor increases flushing air, provides faster drilling and decreases bit wear.
■ Upgraded dust collector has higher suction capacity than previous models. Dust collector
includes an effective pre-cleaner to reduce escape of drilling dust. An optional dust
suppression system is available for difficult drilling conditions.

HC 00 ES
HCR9
HCR900 ES20
HC
■ Low-emission, Tier II Caterpillar ® engine offers low fuel consumption and meets major
exhaust emissions regulations in Europe, the United States.
■ Heavy-duty Caterpillar ® undercarriage – featuring a pentagonal section design to
reduce dirt build-up and track wear – ensures strength and durability.
■ HCR 900 ES20 is ideal when drilling requirements exceed 12'.
Depths up to 18' can be drilled without changing rods.
■ Angle indicator for quick and easy drilling alignment.

HCR 900 ES Shown

 HCR 900 ES ES20
Weight & dimensions:
Operating weight, lbs (kg) 22,068 (10010) 22,300 (10115)
A Overall length, ft (mm) 32'-4" (9840) 33'-7" (10240)
B Ground contact length, ft (mm) 7' 91⁄2" (2380)
C Overall width with pre-cleaner, ft (mm) 10' 7" (3220)
D Transport width, ft (mm) 8' 51⁄4" (2570)
Width over tracks, ft (mm) 7' 10" (2390)
Width of shoe, inch (mm) 12" (300)
F Overall transport height, ft (mm) 8' 11" (2720)
Drifter: HD709
Weight, lbs (kg) 408 (185)
Impact rate, per min 2250 ~ 2500
Number of rotations, per min 0 ~ 250
Undercarriage: Caterpillar ® Pentagonal
Ground clearance, ft (mm) 1' 11" (585)
Oscillating angle, degrees +/- 10˚
Travel speed, mph (km/h) 0 - 2.2 (0 - 3.5)
Gradability degrees 30˚
Engine: Caterpillar ® 3126B
D D Type Water-cooled direct injection, 6-cylinders
turbo charged, Tier II diesel engine
Output/speed, Hp @ RPM (Kw @ RPM) 176 @ 2200 (131 @ 2200)
No. of cylinders - bore / stroke, inch (mm) 6 - 4.33" / 5" (110 / 127)
Piston displacement, cubic inch (liters) 441.78" (7.24)
Hydraulic pump type:
Hydraulic pumps supply oil for
HCR 900 ES20 both travel and drilling.1-gear pump
for cooling and dust collector.
Compressor: PDS265-S35A
Free air delivery, CFM (m3/min) 250 (6.1)
Delivery air pressure, PSI (MPa) 150 (1.03)
Boom: JE326
Lift angle, degrees up/down 45˚/15˚
Swing angle, degrees right/left 37˚/43˚
Extension length, ft (mm) 4' 11" (1500) 4' 11" (1500)
Guide Shell: GH831
Length, ft (mm) 24' 9" (7485) 28' 9" (8763)
Feed length, ft (mm) 14' 11" (4550) 18' 11" (5765)
Slide length, ft (mm) 3' 11" (1200)
Swing angle, degrees right/left 40˚/40˚
Tilt angle, degrees 180˚
HCR 900 ES Dust collector: A884-221
Suction capacity, CFM (m3/min) 706 (20)
Number of Filters 4
Rod arrangement:
Type Rack
Numbers of rod 4 3
Bit and rod:
Bit diameter, inch (mm) 21⁄2" - 31⁄2" (64-89) 3"- 4" (76 - 102)
Rod size T38 & T45
Rod length, ft (mm) 12' (3657)
Starter rod length, ft (mm) 16' (4877) 20' (6096)

Furukawa’s policy is one of continual improvement. Specifications may change between printing.

805 Lake Street • Kent, OH 44240-0017 • Tel: 800.358.4476 • Fax: 330.673.8504

www.furukawarockdrill.com HCR900-2M-05