g GE Energy Savings and Harmonic Estimation Program Main Page

**Select one of the calculation methods above by clicking on the appropriate button. For a description of the calculation,
press the Calculator Descriptions button.

***Calculator answers may vary due to the differences in calculation methods and are not guaranteed. Some calculators may
into account variables that the others may not. Again, all calculations are estimates.
 Main Page

n of the calculation,

d. Some calculators may take

Revision # Change Made New Revision #
Corrected calculation error when
selecting 17 to 18 cents on quick
5.900 calc. 6.000
Calculator Descriptions
Disclaimer
This software is intended for estimation only. It is not intended to replace an on-site harmonic analysis or on-site
energy savings analysis that would consider detailed drive and distribution system data. If these type of services
are required, contact GE Engineering Services at 1-800-533-5885.

Quick Calculation
The quick calculation uses basic information to compute energy savings for pump and fan applications.
The user is required to enter voltage, hp ratings, and the flow control method employed by the end user.
The program will then output a rough estimate of energy savings for the input application vs. selected drive.

Detailed Calculation
The Detailed Calculation requires additional information that might not be as readily available but calculates
energy savings more accurately. This program takes drive efficiency, transformer efficiency, motor efficiency, and
pump system efficiency into account. This calculation requires information about the user's system as well as an
accurate duty cycle.

Multi-Speed/Time Calculation
The Multi-speed/Time Calculation uses the same basic information as the Quick Calculation, only it allows
for more precise duty cycle inputs. It does not allow for drive selection.

Cooling Tower Calculator

The Cooling Tower Calculator is used to provide savings information for replacement of a Two Speed, Two Winding mo
These are the typical motors for on cooling towers when using across the line starting. The user is required to enter
the time run at 100% speed, 50% speed and 0 speed, as well as duty cycles. It does not allow for drive selection.

Estimated Harmonic Calculator

The Estimated Harmonic Calculator is used to give a rough estimate of harmonic distortion up to a specified Point
of Common Coupling (PCC). This calculator assumes the PCC is at the utility connection to the facility. The user
must know all components connected to the same transformer for purposes of this calculation.

IMPORTANT
In order for the program to calculate energy savings properly, you must have Excel running in automatic calculation mode.
To do this, goto Tools /Options and underneath "Calculations", check the box that reads "Automatic".
onic analysis or on-site
If these type of services

n applications.
ed by the end user.
vs. selected drive.

able but calculates

iency, motor efficiency, and
er's system as well as an

on, only it allows

Two Speed, Two Winding motor.

e user is required to enter
allow for drive selection.

n up to a specified Point
to the facility. The user
 Mini

#N/A Column number of selected horsepower in chart

No Offering List Price
1 Multiplier
#VALUE! Net Price

HP

0.12 0.25 0.50 1 2 3 5 7.5 10 15 20 25 30

FVR-C9S Mini Micro 270 275 305 360 475 520 665 XX XX XX XX XX XX XX XX XX XX XX XX XX XX

Labor (1st Drive) 450 450

Labor (Each Additional) 150 0
Total 750
List Prices by Horsepower and Voltage
FVR-C9S Mini Micro

NO OFFERING Offering Check

10/21/2021 11:49:58 551244176.xls

 Mini (Detail)

#N/A Column number of selected horsepower in chart

No Offering List Price
1 Multiplier
#VALUE! Net Price

HP

0.12 0.25 0.50 1 2 3 5 7.5 10 15 20 25 30

FVR-C9S Mini Micro 270 275 305 360 475 520 665 XX XX XX XX XX XX XX XX XX XX XX XX XX XX

Labor (1st Drive) 450 450

Labor (Each Additional) 150 0
Total 450
List Prices by Horsepower and Voltage
FVR-C9S Mini Micro

No Offering Offering Check

10/21/2021 11:49:58 551244176.xls

 Micro

Logic #N/A Column number of selected horsepower in chart

#N/A List Price
1 Multiplier Labor (1st Drive) 450 450
#N/A Net Price Labor (Each Additional) 150 0
Total 450

HP
0.25 0.5 1 2 3 5 7.5 10 15 20 25 30
230 445 510 540 645 700 860 XX XX XX XX XX XX
460 XX 635 670 870 940 1,125 XX XX XX XX XX XX

List Prices by Horsepower and Voltage

AF-300 Micro $aver II

NO OFFERING Offering Check

10/21/2021 11:49:58 551244176.xls

 Micro (Detail)

Logic #N/A Column number of selected horsepower in chart

#N/A List Price
1 Multiplier Labor (1st Drive) 450 450
#N/A Net Price Labor (Each Additional) 150 0
Total 450

HP
0.25 0.5 1 2 3 5 7.5 10 15 20 25 30
230 445 510 540 645 700 860 XX XX XX XX XX XX
460 XX 635 670 870 940 1,125 XX XX XX XX XX XX

List Prices by Horsepower and Voltage

AF-300 Micro $aver II

No Offering Offering Check

10/21/2021 11:49:58 551244176.xls

Logic 17 Column number of selected horsepower in chart
10470 List Price
1 Multiplier
$10,920 Net Price

0.25 0.50 1 2 3
230 670 720 780 840 895
460 N/A 870 920 980 1120

List Prices by Horsepower and Voltage

AF-300P11
Nema 1 Enclosures

Labor (1st Drive) 450

10920 Offering Check Labor (Each Additional) 150
Total
 5 7.5 10 15 20 25 30 40 50 60
990 1100 1375 1670 2235 2820 3350 4905 5030 7350
1270 1410 1760 2145 2870 3595 4080 4950 5695 7120

450
0
450
 75 100 125 150 200 250 300 350 400 450
8720 10280 16400 24800 XX XX XX XX XX XX
8330 10470 12500 14500 17870 21750 25250 27500 33660 41400
 500 600 700 800
XX XX XX XX
54800 74100 87100 99500
Logic 17 Column number of selected horsepower in chart
10470 List Price
1 Multiplier
$10,920 Net Price

0.25 0.50 1 2 3
230 670 720 780 840 895
460 N/A 870 920 980 1120

List Prices by Horsepower and Voltage

AF-300P11
Nema 1 Enclosures

Labor (1st Drive) 450

10920 Offering Check Labor (Each Additional) 150
Total
 5 7.5 10 15 20 25 30 40 50 60
990 1100 1375 1670 2235 2820 3350 4905 5030 7350
1270 1410 1760 2145 2870 3595 4080 4950 5695 7120

450
0
450
 75 100 125 150 200 250 300 350 400 450
8720 10280 16400 24800 XX XX XX XX XX XX
8330 10470 12500 14500 17870 21750 25250 27500 33660 41400
 500 600 700 800
XX XX XX XX
54800 74100 87100 99500
Logic 17 Column number of selected horsepower in chart
14915 List Price
1 Multiplier
$15,365 Net Price

0.25 0.50 1 2 3
230 XX 810 860 920 990
460 XX XX 1100 1180 1270

List Prices by Horsepower and Voltage

AF-300PE$
Nema 1 Enclosures

Labor (1st Drive)

Labor (Each Additional)
15365 Offering Check Total
 5 7.5 10 15 20 25 30 40 50 60
1220 1520 1850 2475 3120 3705 4300 XX XX XX
1560 1950 2375 3175 4000 4750 6350 7050 8560 9955

450 450
150 0
450
 75 100 125 150 200 250 300 350 400 450
XX XX XX XX XX XX XX XX XX XX
11965 14915 17540 19830 24070 28135 30425 XX XX XX
500 600
XX XX
XX XX
Logic 17 Column number of selected horsepower in chart
14915 List Price
1 Multiplier (Deactivated)
$14,915 Net Price

0.25 0.50 1 2 3
230 XX 810 860 920 990
460 XX XX 1100 1180 1270

List Prices by Horsepower and Voltage

AF-300PE$
Nema 1 Enclosures

Labor (1st Drive)

Labor (Each Additional)
14915 Offering Check Total
 5 7.5 10 15 20 25 30 40 50 60
1220 1520 1850 2475 3120 3705 4300 XX XX XX
1560 1950 2375 3175 4000 4750 6350 7050 8560 9955

450 450
150
450
 75 100 125 150 200 250 300 350 400 450
XX XX XX XX XX XX XX XX XX XX
11965 14915 17540 19830 24070 28135 30425 XX XX XX
500 600
XX XX
XX XX
 Inverters 2
2
575 460 380 List Eff 3
1800 1655 1324 1094 56255 98.48% 3
1000 828 662 547 30015 98.41% 17983
620 716 573 473 17983 98.36% 20278
0.9836
Sources 0.9941
575 460 380 List Eff 19781.3
1800 1873 1498 1238 34681 99.49% 22305.8
1000 1041 832 688 23399 99.49% 45087.1
620 551 441 364 20278 99.41% 97.78%

Labor 3000
Program uses ten percent adder to integrator pricing

45087.1 Offering Check

Logic
Inverter voltage column number
Diode Source Column number
Inverter amp row number
Diode Source Row number
Inverter integrator Price
Diode Source integrator price
Inverter Efficiency
Diode Source Efficiency
Inverter final price
Diode Source final price
Total Price
Total Efficiency
WATTS LOST DATA FOR INNOVATION SERIES

TYPE FRAME WATTS CURRENT KW PRODUCED EFFICIECY

DC FED 1800 21500 1800 1418363 98.48%
DC FED 1000 12500 1000 787979 98.41%
DC FED 620 8000 620 488547 98.36%
DC FED 375 5200 375 295492 98.24%
DC FED 250 3600 250 196995 98.17%
DC FED 180 2500 180 141836 98.24%
DC FED 125 1800 125 98497 98.17%
DC FED 92 1500 92 72494 97.93%
DC FED 65 1000 65 51219 98.05%
KW PRODUCED EFFICIECY
PWM SOURCE 1800 15100 1530 1523772 99.01%
PWM SOURCE 1000 8200 850 846540 99.03%
PWM SOURCE 620 4800 450 448168 98.93%
PWM SOURCE 375 3000 272 270893 98.89%
NOTE: AMPS DC
SCR/DIODE SOURCE 1800 6600 1700 1306429 99.49%
SCR/DIODE SOURCE 1000 3900 1000 768488 99.49%
SCR/DIODE SOURCE 620 3200 700 537941 99.41%

Note: For current less than the specified value use ratio techniques to arrive at the new value.
Note: PWM Sources do not include the losses for the reactor.
AVERAGE 98.64%
 Logic
Inverters 2 Inverter voltage column numb
2 Diode Source Column numbe
575 460 380 List Eff 3 Inverter amp row number
1800 1655 1324 1094 56255 98.48% 2 Diode Source Row number
1000 828 662 547 30015 98.41% 17983 Inverter integrator Price
620 716 573 473 17983 98.36% 23399 Diode Source integrator price
0.9836 Inverter Efficiency
Sources 0.9949 Diode Source Efficiency
575 460 380 List Eff 19781.3 Inverter final price
1800 1873 1498 1238 34681 99.49% 25738.9 Diode Source final price
1000 1041 832 688 23399 99.49% 48520.2 Total Price
620 551 441 364 20278 99.41% 97.86% Total Efficiency

Labor 3000
Program uses ten percent adder to integrator pricing

48520.2 Offering Check

Inverter voltage column number
Diode Source Column number
Inverter amp row number
Diode Source Row number
Inverter integrator Price
Diode Source integrator price
Inverter Efficiency
Diode Source Efficiency
Inverter final price
Diode Source final price
Total Price
Total Efficiency
 MV Innovation

Logic
#N/A Column number of selected horsepower in chart Multiplier 1
#N/A List Price for Type H drive for selected ratings Net Price #N/A
#N/A List Price for Type G drive for selected ratings
#N/A Selecting cost effective price from above
#N/A
#N/A
#N/A Drive type

HP 500 600 700 800 900 1000 1250 1500 1750 2000 2250 2500 2750 3000 3500 4000 4500 5000 5500 6000 7000
2300 2300V Innovation type H
3300 3300V Innovation type H
4100 4100V Innovation Type H
6600 6600V Innovation Type H
0
2300 2300V Innovation Type G
4100 4100V Innovation type G
6600
3300

NO OFFERING Offering Check

Labor 3000

10/21/2021 11:49:58 551244176.xls

 MV Innovation (Detail)

Logic
#N/A Column number of selected horsepower in chart Multiplier 1
#N/A List Price for Type H drive for selected ratings Net Price #N/A
#N/A List Price for Type G drive for selected ratings
#N/A Selecting cost effective price from above
#N/A
#N/A
#N/A Drive type

HP 500 600 700 800 900 1000 1250 1500 1750 2000 2250 2500 2750 3000 3500 4000 4500 5000 5500 6000 7000
2300 2300V Innovation type H
3300 3300V Innovation type H
4100 4100V Innovation Type H
6600 6600V Innovation Type H

2300 2300V Innovation Type G

4100 4100V Innovation type G
6600
3300

No Offering Offering Check

Labor 3000

10/21/2021 11:49:58 551244176.xls

 g GE Energy Savings Program Harmonic Estimation Calculator

Harmonic Distortion Calculations ISC Calculation 87,477.3 Amps Rev. D, 10-26-00

Service KVA 4000 Iload Calculation 0.0 Amps

Service Z% 5.5 ISC / Iload Calculation 0.0 Per IEEE 519

Primary Voltage 2300 THD Calculation 0.0 %

Secondary Voltage 480 TDD Required 5.0 %

Drives HP connected with no input filter Enter Data 0 0 Amps

Drives HP connected with 3% Line Reactor 0 0 Amps
Drives HP connected with 5% Line Reactor 0 0 Amps
Drives HP connected with 3% Line Reactor & DC Link Reactor 0 0 Amps
Drives HP connected with 5% Line Reactor & DC Link Reactor 0 0 Amps
Drives HP connected with 12% BBHF 0 0 Amps
Drives HP connected with 8% BBHF 0 0 Amps
Drives HP connected with 5% BBHF 0 0 Amps
Drives HP connected with 12% BBHF & DC Link Reactor 0 0 Amps
Drives HP connected with 8% BBHF & DC Link Reactor 0 0 Amps
Drives HP connected with 5% BBHF & DC Link Reactor 0 0 Amps
Drives HP connected, 12 pulse converter 0 0 Amps
Drives HP connected, 18 pulse converter 0 0 Amps
HP connected of linear load 0 0 Amps
Amp rating of any miscellaneous linear load 0 0 Amps

FOR ESTIMATING PURPOSES ONLY PCC=Utility 0 Amps Total

NOTES:

Disclaimer
This software is intended for estimation only. It is not intended to replace an on-site harmonic analysis or on-site
energy savings analysis that would consider detailed drive and distribution system data. If these type of services
are required, contact GE Engineering Services at 1-800-533-5885.
g GE Energy Savings Calculator Cooling Tower Calculation
Two Speed Cooling Tower Fan AC Drive Retrofit Energy Savings Calculation in Four Easy Steps
First -- Select Prime Mover HP: 30 KWH saved / year: 0
Yearly energy savings: $ -
Second -- Energy Cost in cents / KWH: 10.5

Third -- Enter Data for Present Control Method: Two Speed, Two Winding, AC Motor Started "Across The Line"

Hours @ Hours @ Hours @

Hours 100 50 0
Month Available % Flow % Flow % Flow Totals
Customer:
Janurary 744 0
February 672 0 Application:
March 744 0
April 720 0 Notes:
May 744 0
June 720 0
July 744 0
August 744 0
September 720 0
October 744 0
November 720 0
December 744 0

Totals 8760 0 0 0 0

Present Total KWH 0 0 0 0

Fourth -- Enter Customer Flow Data for Application Utilizing VFD

Hours @ Hours @ Hours @ Hours @ Hours @ Hours @ Hours @ Hours @ Hours @

Hours 100 90 80 70 60 50 40 30 0
Month Available % Flow % Flow % Flow % Flow % Flow % Flow % Flow % Flow % Flow Totals

Janurary 744 0
February 672 0
March 744 0
April 720 0
May 744 0
June 720 0
July 744 0
August 744 0
September 720 0
October 744 0
November 720 0
December 744 0

Totals 8760 0 0 0 0 0 0 0 0 0 0

AC Drive KWH 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0

Disclaimer
This software is intended for estimation only. It is not intended to replace an on-site harmonic analysis or on-site
energy savings analysis that would consider detailed drive and distribution system data. If these type of services
are required, contact GE Engineering Services at 1-800-533-5885.
g GE Energy Savings Program Multi-Speed/Time Savings Calculator
CENTRIFUGAL PUMP AND FAN ENERGY SAVINGS CALCULATIONS
Prime Mover HP: 100 KWH saved / year: 380334.67
Present Control Method: OUTLET DAMPER (FAN) Yearly energy savings: $ 64,656.89
Energy Cost in cents / KWH: 17

Customer Flow Data

Hours @ Hours @ Hours @ Hours @ Hours @ Hours @ Hours @ Hours @ Hours @

Hours 100 90 80 70 60 50 40 30 0
Month Available % Flow % Flow % Flow % Flow % Flow % Flow % Flow % Flow % Flow Totals

Janurary 744 744 744

February 672 672 672
March 744 744 744
April 720 720 720
May 744 744 744
June 720 720 720
July 744 744 744
August 744 744 744
September 720 720 720
October 744 744 744
November 720 720 720
December 744 744 744

Totals 8760 0 0 0 8760 0 0 0 0 0 8760

Present KWH 0 0 0 627356.16 0 0 0 0 0 627356.2

AC Drive KWH 0.00 0.00 0.00 247021.49 0.00 0.00 0.00 0.00 0 247021.5

Customer:
Application:
Notes:

Disclaimer
This software is intended for estimation only. It is not intended to replace an on-site harmonic analysis or on-site
energy savings analysis that would consider detailed drive and distribution system data. If these type of services
are required, contact GE Engineering Services at 1-800-533-5885.
 Quick Calculation
g GE Energy Savings Program Quick Calculation Input Sheet

Place pointer over red box for general help Help

Prime Mover Rating 100 HP

Present Control Method: OUTLET DAMPER (FAN)

50
Energy Cost in cents / KWH: 17
System Voltage 460
% Flow or Speed: 15%
Hours per Year: 8760
# of Pumps /Fans: 1
List Price Multiplier 1.00

GE Drive
-OR-
AF - 300P11(Frac - 800 HP)
Program Default

List Price $10,920.00

GE Energy Savings Program Quick Calculation Results

Drive Selection AF - 300P11(Frac - 800 HP)

GE Default Drive
GE Model Number 6KP1143100X1**

Without With
Drive AC Drive Savings*
Power consumed 425 MWH 003 MWH 421 MWH

Yearly energy savings per drive: $71,628

Total project energy savings: $71,628
Approximate user cost per installed drive: $10,920
Approximate total project cost: $10,920
Approximate payback period in years: 0.15

* All figures represent typical savings and may vary according to the user's application.
For contact information, call GE-Fuji Drives USA, Inc. customer service at 1-540-387-7162.

Disclaimer
This software is intended for estimation only. It is not intended to replace an on-site harmonic analysis or on-site
energy savings analysis that would consider detailed drive and distribution system data. If these type of services
are required, contact GE Engineering Services at 1-800-533-5885.

10/21/2021 11:49:58 551244176.xls

 Detailed Calculation

g GE Energy Savings Program Help Detailed Calculation Input Screen

Motor/Drive Data System Data

Motor Rating 100 HP Energy Cost ($/KWH) 0.18 Application Pump

Rated 460 Volts Flow (GPM) 25000 Qty. of Pumps 1 1
Speed 1800 RPM Head (Ft.) 100 Peak Head 110% 2
Low Speed 1800 RPM Density 1 Rated Eff% 85% 3

GE Drive Static Head% 15% 4

-OR- AF - 300P11 GO Control Method Used Throttled Discharge 5
Program Default
6
Duty Cycle Data %Flow %Time Hrs/Yr MWH/Yr MWH/Yr 7
1 70 100 8760.0 4266.2 #N/A 8
2 0 0 0.0 0.0 0.0 9
3 0 0 0.0 0.0 0.0 10
4 0 0 0.0 0.0 0.0 11
5 0 0 0.0 0.0 0.0 12
Totals 100.0 8760.0 4266.2 #N/A 13
14
15
16
17
18

GE Energy Savings Program Detail Calculation Results 19

20
21
22
23
24
Selected Drive AF - 300P11 25
GE Model Number 6KP1143100X1** 26
27
Without With 28
Drive Drive Savings*

Power consumed 4266 MWH #N/A #N/A

100
Yearly energy savings per drive: #N/A
Total project energy savings: #N/A
Approximate user cost per installed drive: $10,920
Approximate total project cost: $10,920
Approximate payback period in years: #N/A

* All figures represent typical savings and may vary according to the user's application.
For contact information, call GE-Fuji Drives USA, Inc. customer service at 1-540-387-7162.

Disclaimer
This software is intended for estimation only. It is not intended to replace an on-site harmonic analysis or on-site
energy savings analysis that would consider detailed drive and distribution system data. If these type of services
are required, contact GE Engineering Services at 1-800-533-5885.

10/21/2021 11:49:58 551244176.xls

 Choose for me 1 Price

AF - 300E$ (Frac -350HP) 4 15365

100 AF - 300P11(Frac - 600 HP) 5 10920
0 AF-300 Micro $aver II (Frac -5HP) 6 NO OFFERING
0 FVR-C9S Mini Micro (Frac - 5HP) 7 NO OFFERING

GE Reccomended Drive: No offering

GE Reccomended Drive Price No Offering
GE Reccomended Drive Model Number No Offering
User Selected 6KP1143100X1**
MV Innovation (2.3KV-6.6KV) 2 NO OFFERING
LV Innovation (380V -575V) 3 45087.1
 2
10920 List Price for drive selected
#N/A
6KE$243100X1**
6KP1143100X1**
6KM$243100N1**
FVR100C9S-2**

143100X1**
 Choose for me 1 Price
AF - 300E$ (Frac -350HP) 2 14915
AF - 300P11(Frac - 800 HP) 3 10920
AF-300 Micro $aver II (Frac -5HP) 4 No Offering
100 FVR-C9S Mini Micro (Frac - 5HP) 5 No Offering
0
0
No offering
No Offering
GE Reccomended Drive: No Offering
GE Reccomended Drive Price
GE Reccomended Drive Model Number
Reccomended Drive Efficiency
User Selected Drive 6KP1143100X1**
 2 EFFICIENCY
6KE$243100X1** 10920
6KP1143100X1** #N/A
6KM$243100N1**
FVR100C9S-2**

143100X1**
 Calculate Low Flow Threshold
Pump Application 0
0.15 Per Unit Static Head A 0.85
1.00 Per unit speed B 0.1
1.1 Per Unit Head C -0.95
100 Low Flow Threshold

0 Low speed flow

Throttled Discharge Control Method

Case 1 2 3 4 5
Process flow <= low speed flow 0 0 0 0 0
Pump Flow =Process Flow 1 0 0 0 0
Process Flow 70 0 0 0 0
Per Unit efficiency (pump) 84.0 84.0 84.0 84.0 84.0
Lookup value (pump) 70 #DIV/0! #DIV/0! #DIV/0! #DIV/0!
New X (Pump) 78.0 #DIV/0! #DIV/0! #DIV/0! #DIV/0!
Efficiency (Pump) 79 #DIV/0! #DIV/0! #DIV/0! #DIV/0!
Per Unit Efficiency (fan) 84 84 84 84 84
Lookup value (fan) 70 0 0 0 0
New X (Fan) 78 0 0 0 0
Efficiency (Fan) 79 0 0 0 0
LS Head (lowspeed) 15 15 15 15 15
Head (recirculating,lowspeed) 57 15 15 15 15
Head (recirculating) 57 15 15 15 15
Lookup value (else) 70 #DIV/0! #DIV/0! #DIV/0! #DIV/0!
Head (else) 107 #DIV/0! #DIV/0! #DIV/0! #DIV/0!
pumpflowvalue4below 70 0 0 0 0
Head (fan,guidevanes) 57 15 15 15 15
Head (else, lookup and calc) 109 100 100 100 100
(Recirculating) 0 0 0 0 0
speed AND recirculate,throttle) 0 1 1 1 1
(Low speed AND Recirculate) 0 0 0 0 0
(Unrestricted) 0 0 0 0 0
cted,Guidevanes AND low speed) 0 0 0 0 0
d,recirculate,guide AND lowspeed) 0 1 1 1 1
Guidevanes 0 0 0 0 0
Pump Flow (Recirculating) 143 185 185 185 185
speed AND recirculate,throttle) #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0!
w (Low speed AND Recirculate) -178 100 100 100 100
Pump Flow (Unrestricted) 100 100 100 100 100
cted,Guidevanes AND low speed) #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0!
,recirculate,guide AND lowspeed)
Guidevanes
PF (pump) 70 #DIV/0! #DIV/0! #DIV/0! #DIV/0!
PF (Fan) 70 0 0 0 0
PF(Final) 70 #DIV/0! #DIV/0! #DIV/0! #DIV/0!
Head (Pump) 107 #DIV/0! #DIV/0! #DIV/0! #DIV/0!
Head (Fan) 109 100 100 100 100
 Head (Final) 107 #DIV/0! #DIV/0! #DIV/0! #DIV/0!
Efficiency(Pump) 79 #DIV/0! #DIV/0! #DIV/0! #DIV/0!
Efficiency(Fan) 79 0 0 0 0
Efficiency (Final) 79 #DIV/0! #DIV/0! #DIV/0! #DIV/0!
Flow Pump Head
120 92
110 96.7
100 100
90 103
80 105.3
70 107
60 108
50 108.6
40 108.9
30 109.1
20 109.4
10 109.8
0 110

Flow Fan Head

120 92
110 96.7
100 100
95 103
90 105.3
85 107
80 108
75 108.6
70 108.9
65 109.1
60 109.4
55 109.8
50 110
45 109.8
40 109.4
35 109
30 108.9
25 108.6
20 108
15 107
10 105.3
5 103
0 100
Pump Efficiency %Flow Pump Fan
82 0 0 0
83.5 1 1.8 1.8
84 2 3.6 3.6
83.5 3 5.4 5.4
82 4 7.2 7.2
78 5 9 9
73.5 6 10.8 10.8
67.5 7 12.6 12.6
59 8 14.4 14.4
48 9 16.2 16.2
35 10 18 18
18 11 19.7 19.7
0 12 21.4 21.4
13 23.1 23.1
Fan Efficiency Flow IGVN 14 24.8 24.8
82 100 98 15 26.5 26.5
83.5 95 95 16 28.2 28.2
84 90 92 17 29.9 29.9
83.8 86 87 18 31.6 31.6
83.5 83 83 19 33.3 33.3
82.8 75 68 20 35 35
82 70 58 21 36.3 36.3
80 60 41 22 37.6 37.6
78 52 30 23 38.9 38.9
75.8 45 21.5 24 40.2 40.2
73.5 40 16 25 41.5 41.5
70.5 35 12 26 42.8 42.8
67.5 30 8 27 44.1 44.1
63.3 25 6 28 45.4 45.4
59 20 4 29 46.7 46.7
53.5 0 0 30 48 48
48 31 49.1 49.1
41.5 32 50.2 50.2
35 33 51.3 51.3
26.5 34 52.4 52.4
18 35 53.5 53.5
9 36 54.6 54.6
0 37 55.7 55.7
38 56.8 56.8
39 57.9 57.9
40 59 59
41 59.85 59.85
42 60.7 60.7
43 61.55 61.55
44 62.4 62.4
45 63.25 63.25
46 64.1 64.1
47 64.95 64.95
48 65.8 65.8
49 66.65 66.65
50 67.5 67.5
51 68.1 68.1
52 68.7 68.7
53 69.3 69.3
54 69.9 69.9
55 70.5 70.5
56 71.1 71.1
57 71.7 71.7
58 72.3 72.3
59 72.9 72.9
60 73.5 73.5
61 73.95 73.95
62 74.4 74.4
63 74.85 74.85
64 75.3 75.3
65 75.75 75.75
66 76.2 76.2
67 76.65 76.65
68 77.1 77.1
69 77.55 77.55
70 78 78
71 78.4 81.36
72 78.8 81.52
73 79.2 81.68
74 79.6 81.84
75 80 80
76 80.4 80.4
77 80.8 80.8
78 81.2 81.2
79 81.6 81.6
80 82 82
81 82.15 82.15
82 82.3 82.3
83 82.45 82.45
84 82.6 82.6
85 82.75 82.8
86 82.9 82.9
87 83.05 83.05
88 83.2 83.2
89 83.35 83.35
90 83.5 83.5
91 83.55 83.55
92 83.6 83.6
93 83.65 83.65
94 83.7 83.7
95 83.75 83.8
96 83.8 83.8
97 83.85 83.85
 98 83.9 83.9
99 83.95 83.95
100 84 84
101 83.95 83.95
102 83.9 83.9
103 83.85 83.85
104 83.8 83.8
105 83.75 83.75
106 83.7 83.7
107 83.65 83.65
108 83.6 83.6
109 83.55 83.55
110 83.5 83.5
111 83.35 83.35
112 83.2 83.2
113 83.05 83.05
114 82.9 82.9
115 82.75 82.75
116 82.6 82.6
117 82.45 82.45
118 82.3 82.3
119 82.15 82.15
120 82 82
IGVN PumpHead FanHead Derate Pump
0 110 100 0.00
0.2 109.98 100.6 1.80
0.4 109.96 101.2 3.60
0.6 109.94 101.8 5.40
0.8 109.92 102.4 7.20
1 109.9 103 9.00
1.2 109.88 103.46 10.80
1.4 109.86 103.92 12.60
1.6 109.84 104.38 14.40
1.8 109.82 104.84 16.20
2 109.8 105.3 18.00
2.2 109.76 105.64 19.80
2.4 109.72 105.98 21.60
2.6 109.68 106.32 23.40
2.8 109.64 106.66 25.20
3 109.6 107 27.00
3.2 109.56 107.2 28.80
3.4 109.52 107.4 30.60
3.6 109.48 107.6 32.40
3.8 109.44 107.8 34.20
4 109.4 108 36.00
4.4 109.37 108.12 38.80
4.8 109.34 108.24 41.60
5.2 109.31 108.36 44.40
5.6 109.28 108.48 47.20
6 109.25 108.6 50.00
6.4 109.22 108.66 52.80
6.8 109.19 108.72 55.60
7.2 109.16 108.78 58.40
7.6 109.13 108.84 61.20
8 109.1 108.9 64.00
8.8 109.08 108.92 64.80
9.6 109.06 108.94 65.60
10.4 109.04 108.96 66.40
11.2 109.02 108.98 67.20
12 109 109 68.00
12.8 108.98 109.08 68.80
13.6 108.96 109.16 69.60
14.4 108.94 109.24 70.40
15.2 108.92 109.32 71.20
16 108.9 109.4 72.00
17.1 108.87 109.48 73.10
18.2 108.84 109.56 74.20
19.3 108.81 109.64 75.30
20.4 108.78 109.72 76.40
21.5 108.75 109.8 77.50
22.71 108.72 109.84 78.60
23.93 108.69 109.88 79.70
25.14 108.66 109.92 80.80
26.36 108.63 109.96 81.90
27.57 108.6 110 83.00
28.79 108.54 109.96 83.80
30 108.48 109.92 84.60
31.38 108.42 109.88 85.40
32.75 108.36 109.84 86.20
34.13 108.3 109.8 87.00
35.5 108.24 109.72 87.80
36.88 108.18 109.64 88.60
38.25 108.12 109.56 89.40
39.63 108.06 109.48 90.20
41 108 109.4 91.00
42.7 107.9 109.34 91.50
44.4 107.8 109.28 92.00
46.1 107.7 109.22 92.50
47.8 107.6 109.16 93.00
49.5 107.5 109.1 93.50
51.2 107.4 109.06 94.00
52.9 107.3 109.02 94.50
54.6 107.2 108.98 95.00
56.3 107.1 108.94 95.50
58 107 108.9 96.00
60 106.83 108.84 96.30
62 106.66 108.78 96.60
64 106.49 108.72 96.90
66 106.32 108.66 97.20
68 106.15 108.6 97.50
69.9 105.98 108.48 97.80
71.8 105.81 108.36 98.10
73.6 105.64 108.24 98.40
75.5 105.47 108.12 98.70
77.4 105.3 108 99.00
79.3 105.07 107.8 99.10
81.1 104.84 107.6 99.20
83 104.61 107.4 99.30
84.3 104.38 107.2 99.40
85.7 104.15 107 99.50
87 103.92 106.66 99.60
88.3 103.69 106.32 99.70
89.5 103.46 105.98 99.80
90.8 103.23 105.64 99.90
92 103 105.3 100.00
92.6 102.7 104.84 100.00
93.2 102.4 104.38 100.00
93.8 102.1 103.92 100.00
94.4 101.8 103.46 100.00
95 101.5 103 100.00
95.6 101.2 102.4 100.00
96.2 100.9 101.8 100.00
96.8 100.6 101.2 100.00
97.4 100.3 100.6 100.00
98 100 100 100.00
99.67 99.67 100.00
99.34 99.34 100.00
99.01 99.01 100.00
98.68 98.68 100.00
98.35 98.35 100.00
98.02 98.02 100.00
97.69 97.69 100.00
97.36 97.36 100.00
97.03 97.03 100.00
96.7 96.7 100.00
96.23 96.23 100.00
95.76 95.76 100.00
95.29 95.29 100.00
94.82 94.82 100.00
94.35 94.35 100.00
93.88 93.88 100.00
93.41 93.41 100.00
92.94 92.94 100.00
92.47 92.47 100.00
92 92 99.00
 Case 1 Case 2 Case 3 Case4 Case 5
HCC 107 110 110 110 110
Head 57 15 15 15 15

Case 1 |speed-spda| speed adjustible speed (spda) head base case (hb) base flow (flowb)
Initial 27.24 73 100 107 96
1 2.17 75 73 101 93
2 0.24 75 75 102 94
3 0.03 75 75 101 94
4 0.00 75 75 101 94
5 0.00 75 75 101 94
6 0.00 75 75 101 94
7 0.00 75 75 101 94
8 0.00 75 75 101 94
9 0.00 75 75 101 94
10 0.00 75 75 101 94
11 0.00 75 75 101 94
12 0.00 75 75 101 94
13 0.00 75 75 101 94
14 0.00 75 75 101 94
15 0.00 75 75 101 94

Case 2 |speed-spda| speed adjustible speed (spda) head base case (hb) base flow (flowb)
Initial 63.07 37 100 110 0
1 0.00 37 37 110.00 0
2 0.00 37 37 110.00 0
3 0.00 37 37 110.00 0
4 0.00 37 37 110.00 0
5 0.00 37 37 110.00 0
6 0.00 37 37 110.00 0
7 0.00 37 37 110.00 0
8 0.00 37 37 110.00 0
9 0.00 37 37 110.00 0
10 0.00 37 37 110.00 0
11 0.00 37 37 110.00 0
12 0.00 37 37 110.00 0
13 0.00 37 37 110.00 0
14 0.00 37 37 110.00 0
15 0.00 37 37 110.00 0

Case 3 |speed-spda| speed adjustible speed (spda) head base case (hb) base flow (flowb)
Initial 63.07 37 100 110 0
1 0.00 37 37 110.00 0
2 0.00 37 37 110.00 0
3 0.00 37 37 110.00 0
4 0.00 37 37 110.00 0
5 0.00 37 37 110.00 0
6 0.00 37 37 110.00 0
7 0.00 37 37 110.00 0
 8 0.00 37 37 110.00 0
9 0.00 37 37 110.00 0
10 0.00 37 37 110.00 0
11 0.00 37 37 110.00 0
12 0.00 37 37 110.00 0
13 0.00 37 37 110.00 0
14 0.00 37 37 110.00 0
15 0.00 37 37 110.00 0

Case 4 |speed-spda| speed adjustible speed (spda) head base case (hb) base flow (flowb)
Initial 63.07 37 100 110 0
1 0.00 37 37 110.00 0
2 0.00 37 37 110.00 0
3 0.00 37 37 110.00 0
4 0.00 37 37 110.00 0
5 0.00 37 37 110.00 0
6 0.00 37 37 110.00 0
7 0.00 37 37 110.00 0
8 0.00 37 37 110.00 0
9 0.00 37 37 110.00 0
10 0.00 37 37 110.00 0
11 0.00 37 37 110.00 0
12 0.00 37 37 110.00 0
13 0.00 37 37 110.00 0
14 0.00 37 37 110.00 0
15 0.00 37 37 110.00 0

Case 5 |speed-spda| speed adjustible speed (spda) head base case (hb) base flow (flowb)
Initial 63.07 37 100 110 0
1 0.00 37 37 110.00 0
2 0.00 37 37 110.00 0
3 0.00 37 37 110.00 0
4 0.00 37 37 110.00 0
5 0.00 37 37 110.00 0
6 0.00 37 37 110.00 0
7 0.00 37 37 110.00 0
8 0.00 37 37 110.00 0
9 0.00 37 37 110.00 0
10 0.00 37 37 110.00 0
11 0.00 37 37 110.00 0
12 0.00 37 37 110.00 0
13 0.00 37 37 110.00 0
14 0.00 37 37 110.00 0
15 0.00 37 37 110.00 0
 Derate Pump Efficiency Curve
Case 1 Case 2 Case 3 Case 4 Case 5 Flow Eff
SPD(1) #N/A 37 37 37 37 120 99
Lookup #N/A 0 0 0 0 110 100
Curveresults #N/A 0 0 0 0 100 100
Efficiency #N/A 0 0 0 0 90 100
80 99
70 96
60 91
50 83
40 72
30 64
20 36
10 18
0 0
 size NL FL
KVA KW KW
kva 78.33 100000 183 504
down 20 50000 91.5 252
30000 63.5 174
20000 47.2 130
NL 0.597 16000 45.5 114.1
FL 4.141 10000 15 64
Diff 3.544 7500 11.5 54
5000 8.7 39.7
3750 6.8 31
2500 5 22.5
2000 4.3 19
1500 3.2 15.2
1250 2.95 14.05
1000 2.5 11.8
500 1.5 7
400 1.75 10.8
300 1.25 8.7
225 0.974 6.194
150 0.815 4.87
112.5 0.597 4.141
75 0.538 3.245
45 0.368 1.793
30 0.237 1.493
15 0.14 0.455
9 0.12 0.292
6 0.083 0.246
3 0.045 0.158
2 0.036 0.128
1 0.021 0.075
Drive HP Loss (W) DE Drive Start
5 0.12 26 #N/A
5 0.25 45 #N/A 1 2 3
5 0.5 75 #N/A power out #N/A #DIV/0! #DIV/0!
5 1 95 #N/A
5 2 140 #N/A
5 3 180 #N/A
5 5 260 #N/A
5 7.5
5 10
5 15
5 20
5 25
5 30
4 0.5 93 #N/A
4 1 113 #N/A
4 2 203 #N/A
4 3 260 #N/A
4 5 366 #N/A
4 7.5 AF - 300E$ (Frac -350HP) 2 16
4 10 AF - 300P11(Frac - 600 HP) 3 22
4 15 AF-300 Micro $aver II (Frac - 4 12
4 20 FVR-C9S Mini Micro (Frac - 5 5 13
4 25 LV Innovation (380V -575V) 6
4 30 Innovation type G 7
3 7.5 160 #N/A Innovation type H 8
3 10 210 #N/A
3 15 300 #N/A #N/A size if choose for me
3 20 360 #N/A 22 size
3 25 460 #N/A 48.0 down
3 30 530 #N/A #N/A position
3 40 750 #N/A #N/A Drive Efficiency
3 50 950 #N/A 5 Drive Powerfactor
3 60 1100 #N/A #N/A choose for me number
3 75 1350 #N/A
3 100 1800 #N/A
3 125 1850 #N/A
3 150 2400 #N/A
3 200 2900 #N/A
3 250 3250 #N/A
3 300 4250 #N/A
3 350 4350 #N/A
3 400 5100 #N/A
3 450 5700 #N/A
3 500 6900 #N/A
3 600 8050 #N/A
3 700 8900 #N/A
3 800 10300 #N/A
2 7.5 400 #N/A
2 10 525 #N/A
2 15 610 #N/A
2 20 780 #N/A
2 25 970 #N/A
2 30 1000 #N/A
2 40 1050 #N/A
2 50 1150 #N/A
2 60 1250 #N/A
2 75 1500 #N/A
2 100 1850 #N/A
2 125 2000 #N/A
2 150 2300 #N/A
2 200 3150 #N/A
2 250 3800 #N/A
2 300 4300 #N/A
 Name

4 5
#DIV/0! #DIV/0!

AF - 300E$
AF - 300P11
AF-300 Micro $aver II
FVR-C9S Mini Micro
LV Innovation
Innovation type G
Innovation type H

size if choose for me

Drive Efficiency
Drive Powerfactor
choose for me number
RPM HP 1 2 3 4 5
3600 99999 97.2 97.2 96.5 95.3 77.8
3600 1 72 72 66 70.6 57.6
3600 2 83 83 79 81.3 66.4
3600 5 84 84 79.5 82.3 67.2
3600 10 86.5 86.5 87.5 84.8 69.2
3600 100 90.2 90.2 88.5 88.4 72.2
3600 250 93 93 92.4 91.1 74.4
3600 600 94 94 93.1 92.1 75.2
3600 1000 94.8 94.8 94 92.9 75.8
3600 2000 95.6 95.6 94.8 93.7 76.5
3600 5000 96.2 96.2 95.5 94.3 77
1800 1 72 70 66 70.6 57.6
1800 2 80 80 78 78.4 64
1800 5 82.5 82.5 80.5 80.8 66
1800 10 85.5 86.5 85.5 83.8 68.4
1800 100 91.7 91.7 91.7 89.9 73.4
1800 250 93.6 94.5 94.5 91.7 74.9
1800 600 93.6 93.6 93 91.7 74.9
1800 1000 94.3 94.3 93.7 92.4 75.4
1800 2000 95.1 95.1 94.5 93.2 76.1
1800 5000 95.7 95.7 95.2 93.8 76.6
1800 99999 96.7 96.7 96.2 94.8 77.4
1200 1 76.5 75 71 75 61.2
1200 2 78.5 76.5 72.5 76.9 62.8
1200 5 84 84 82.5 82.3 67.2
1200 10 86.5 87.5 86.5 84.8 69.2
1200 100 92.4 92.4 91.7 90.6 73.9
1200 250 94.3 94.8 94.8 92.4 75.4
1200 600 93.5 93.5 93 91.6 74.8
1200 1000 94.2 94.2 93.8 92.3 75.4
1200 2000 95 94.8 94.3 93.1 76
1200 5000 95.6 95.6 95.2 93.7 76.5
1200 99999 96.6 96.6 96.2 94.7 77.3
900 1 70 70 64 68.6 56
900 2 72 72 66 70.6 57.6
900 5 78.5 78.5 74 76.9 62.8
900 10 84 86.5 85.5 82.3 67.2
900 100 91.7 92.4 92.4 89.9 73.4
900 250 91.9 91.8 91.2 90.1 73.5
900 600 93.5 93.4 92.8 91.6 74.8
900 1000 94.1 94 93.5 92.2 75.3
900 2000 94.9 94.8 94.2 93 75.9
900 5000 94.5 95.3 94.8 92.6 75.6
900 99999 95.5 96.3 95.8 93.6 76.4
720 100 90.3 90.2 89.4 88.5 72.2
720 250 91.8 91.7 90.9 90 73.4
720 600 93.4 93.3 92.6 91.5 74.7
 720 1000 94 93.9 93.3 92.1 75.2
720 2000 94.7 94.6 93.9 92.8 75.8
720 5000 95.3 95.2 94.6 93.4 76.2
720 99999 96.3 96.2 95.6 94.4 77
600 100 89.8 89.6 88.6 88 71.8
600 250 91.8 91.6 90.6 90 73.4
600 600 93.2 93 92.2 91.3 74.6
600 1000 93.8 93.6 92.9 91.9 75
600 2000 94.4 94.2 93.4 92.5 75.5
600 5000 94.9 94.7 94 93 75.9
600 99999 95.9 95.7 95 94 76.7
514 100 89.7 89.2 88 87.9 71.8
514 250 91.7 91.2 90 89.9 73.4
514 600 93.1 92.6 91.6 91.2 74.5
514 1000 93.6 93.1 92.3 91.7 74.9
514 2000 94.2 93.7 92.8 92.3 75.4
514 5000 94.8 94.3 93.5 92.9 75.8
514 99999 95.8 95.3 94.5 93.9 76.6
450 100 89.6 89.1 87.9 87.8 71.7
450 250 91.5 91 89.8 89.7 73.2
450 600 92.9 92.4 91.4 91 74.3
450 1000 93.4 92.9 91.9 91.5 74.7
450 2000 94 93.5 92.6 92.1 75.2
450 5000 94.6 94.1 93.3 92.7 75.7
450 99999 95.6 95.1 94.3 93.7 76.5
400 800 93.1 92.6 91.6 91.2 74.5
400 2000 93.7 93.2 92.3 91.8 75
400 5000 94.2 93.7 92.9 92.3 75.4
400 99999 95.2 94.7 93.9 93.3 76.2
360 800 92.9 92.4 91.4 91 74.3
360 2000 93.5 93 91.9 91.6 74.8
360 5000 93.9 93.4 92.6 92 75.1
360 99999 94.9 94.4 93.6 93 75.9

Base Case
# ratings Rows Down Position within group 5 5 5
360 4 76 Running HP 599 #DIV/0! #DIV/0!
400 4 72 Rated HP (MHP) 100 100 100
450 7 65 Pull 1 #DIV/0! #DIV/0!
514 7 58 J 4 #DIV/0! #DIV/0!
600 7 51 IA(J) 1 #DIV/0! #DIV/0!
720 7 44 IB(J) 2 #DIV/0! #DIV/0!
900 11 33 X(INT) 0.25 #DIV/0! #DIV/0!
 1200 11 22 XPU 0.75 #DIV/0! #DIV/0!
1800 11 11 Efficiency with pull<.05 1468 #DIV/0! #DIV/0!
3600 11 1 Curve indexed at IB 91.7 #DIV/0! #DIV/0!
Selected 11 11 Curve indexed at IA 91.7 #DIV/0! #DIV/0!
Efficiency else 92 #DIV/0! #DIV/0!
Final Efficiency Motor 92 #DIV/0! #DIV/0!
Powerfactor motor where pul<.05 4.3 4.3 4.3
Powerfactor motor else 87 #DIV/0! #DIV/0!
Powerfactor Motor 87 #DIV/0! #DIV/0!
AS Case
Position within group 5 5 5
Running HP #N/A #DIV/0! #DIV/0!
Rated HP (MHP) 100 100 100
Pull #N/A #DIV/0! #DIV/0!
J #N/A #DIV/0! #DIV/0!
IA(J) #N/A #DIV/0! #DIV/0!
IB(J) #N/A #DIV/0! #DIV/0!
X(INT) #N/A #DIV/0! #DIV/0!
XPU #N/A #DIV/0! #DIV/0!
Efficiency with pull<.05 #N/A #DIV/0! #DIV/0!
Curve indexed at IB #N/A #DIV/0! #DIV/0!
Curve indexed at IA #N/A #DIV/0! #DIV/0!
Efficiency else #N/A #DIV/0! #DIV/0!
Final Efficiency Motor #N/A #DIV/0! #DIV/0!
Powerfactor motor where pul<.05 4.3 4.3 4.3
Powerfactor motor else #N/A #DIV/0! #DIV/0!
Powerfactor Motor #N/A #DIV/0! #DIV/0!
6 7 8 9 10
90 89 83 63 4.5
80 69 57 56 4
88 84 76 61.6 4.4
84 77.5 66.5 58.8 4.2
88.5 89.1 83.5 62 4.4
89 90.5 86.8 62.3 4.5
92.5 94.1 92 64.8 4.6
86 83 76 60.2 4.3
88 86 80 61.6 4.4
89 88 82 62.3 4.5
89 88 82 62.3 4.5
80 69 57 56 4
84 77 66 58.8 4.2
78.5 71.5 59 55 3.9
80.5 77.3 67.1 56.3 4
87 86.6 81.3 60.9 4.3
88.5 88 84 62 4.4
88 86 80 61.6 4.4
88 86 80 61.6 4.4
89 88 82 62.3 4.5
90 89 84 63 4.5
91 90 85 63.7 4.6
71 63 50 49.7 3.6
67.5 58.5 46 47.3 3.4
75 70.2 58.3 52.5 3.8
80 75.5 64 56 4
82.5 81.3 73.8 57.8 4.1
85 82.3 74.6 59.5 4.3
85 82 74 59.5 4.3
86 83 78 60.2 4.3
87 85 78 60.9 4.3
88 86 80 61.6 4.4
89 87 81 62.3 4.5
57 48 38 39.9 2.9
57.5 48 38 40.3 2.9
69.5 60 47 48.6 3.5
77.5 71 60 54.3 3.9
78.5 75 68 55 3.9
82 78 68 57.4 4.1
85 82 74 59.5 4.3
85 82 74 59.5 4.3
85 82 74 59.5 4.3
88 86 80 61.6 4.4
89 87 81 62.3 4.5
80 75 66 56 4
80 75 65 56 4
81 77 67 56.7 4.1
 83 79 70 58.1 4.2
84 80 71 58.8 4.2
86 83 76 60.2 4.3
87 84 77 60.9 4.3
75 68 56 52.5 3.8
75 68 56 52.5 3.8
78 72 60 54.6 3.9
80 75 65 56 4
84 80 71 58.8 4.2
85 82 74 59.5 4.3
86 83 75 60.2 4.3
70 60 50 49 3.5
70 60 50 49 3.5
75 68 56 52.5 3.8
78 72 60 54.6 3.9
80 75 65 56 4
83 79 70 58.1 4.2
84 80 71 58.8 4.2
70 60 50 49 3.5
70 60 50 49 3.5
73 63 53 51.1 3.7
77 71 59 53.9 3.9
80 75 65 56 4
82 78 68 57.4 4.1
83 79 69 58.1 4.2
73 63 53 51.1 3.7
78 72 60 54.6 3.9
80 75 65 56 4
81 76 66 56.7 4.1
72 62 52 50.4 3.6
76 69 57 53.2 3.8
80 75 65 56 4
81 76 66 56.7 4.1

Min Pull IA IB Xint

0 4 5 0.2
0.25 3 4 0.25
0.5 2 3 0.25
0.75 1 2 0.25

5 5
#DIV/0! #DIV/0!
100 100
#DIV/0! #DIV/0!
#DIV/0! #DIV/0!
#DIV/0! #DIV/0!
#DIV/0! #DIV/0!
#DIV/0! #DIV/0!
#DIV/0! #DIV/0!
#DIV/0! #DIV/0!
#DIV/0! #DIV/0!
#DIV/0! #DIV/0!
#DIV/0! #DIV/0!
#DIV/0! #DIV/0!
4.3 4.3
#DIV/0! #DIV/0!
#DIV/0! #DIV/0!

5 5
#DIV/0! #DIV/0!
100 100
#DIV/0! #DIV/0!
#DIV/0! #DIV/0!
#DIV/0! #DIV/0!
#DIV/0! #DIV/0!
#DIV/0! #DIV/0!
#DIV/0! #DIV/0!
#DIV/0! #DIV/0!
#DIV/0! #DIV/0!
#DIV/0! #DIV/0!
#DIV/0! #DIV/0!
#DIV/0! #DIV/0!
4.3 4.3
#DIV/0! #DIV/0!
#DIV/0! #DIV/0!
Min Pull IA IB Xint
 0
0 AS Coupling used

BC1 AS1 BC2 AS2 BC3 AS3 BC4 AS4

Head(k) 107 57 #DIV/0! 15 #DIV/0! 15 #DIV/0! 15
Eff(k) 79 #N/A #DIV/0! 0 #DIV/0! 0 #DIV/0! 0
SPD(k) 100 #N/A 100 37 100 37 100 37
BHP(k) 598.64 #N/A #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0!
GE 100 100.0 100 100.0 100 100.0 100 100.0
CPL(k) 100 100 100 100
ME (k) 92 #N/A #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0!
MPF (k) 87.0 #N/A #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0!
Mecalc 598.64 #N/A #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0!
Tecalc 100.0 100.0 100.0 100.0
DE (k) #N/A #N/A #N/A #N/A
DPF(k) 5 5 5 5
TE(k) 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0
HRS 8760 8760 0 0 0 0 0 0
OE(k) 91.7 #N/A #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0!
KW(k) 487 #N/A #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0!
KWH(k) 4266159.7 #N/A #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0!
MWH(k) 4266.2 #N/A #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0!
TEMP 3963 TEMP 3963 TEMP 3963 TEMP 3963
LSF,0 0 LSF,0 0 LSF,0 0 LSF,0 0
LKW #N/A LKW #DIV/0! LKW #DIV/0! LKW #DIV/0!
LKVA #N/A LKVA #DIV/0! LKVA #DIV/0! LKVA #DIV/0!
LKWin #N/A LKWin #DIV/0! LKWin #DIV/0! LKWin #DIV/0!
LKVAin #N/A LKVAin #DIV/0! LKVAin #DIV/0! LKVAin #DIV/0!
LKWbc 487.0045 LKWbc #DIV/0! LKWbc #DIV/0! LKWbc #DIV/0!
LKVAbc 559.7753 LKVAbc #DIV/0! LKVAbc #DIV/0! LKVAbc #DIV/0!
 Eddy Current Coupling Data
100 96.7
BC5 AS5 90 84.4
#DIV/0! 15 80 74
#DIV/0! 0 70 64
100 37 0 0
#DIV/0! #DIV/0!
100 100.0 7.42 fixed pump loss
100
#DIV/0! #DIV/0!
#DIV/0! #DIV/0!
#DIV/0! #DIV/0!
100.0
#N/A
5
100.0 100.0
0 0
#DIV/0! #DIV/0!
#DIV/0! #DIV/0!
#DIV/0! #DIV/0!
#DIV/0! #DIV/0!
TEMP 3963
LSF,0 0
LKW #DIV/0!
LKVA #DIV/0!
LKWin #DIV/0!
LKVAin #DIV/0!
LKWbc #DIV/0!
LKVAbc #DIV/0!