Catalogo Brownings General

Roller Bearing Family of Products
BROWNING offers a broad and complete line

of mounted roller bearing products to satisfy
a large variety of rugged, industrial
applications.
ROLLER BEARINGS
Browning roller bearings are completely
assembled, adjusted and lubricated at the factory
ready for use. Great for bulk material handling
applications that require rugged quality bearings
with reliable sealing. Installation is simple and
instructions are included with each unit. Most
Browning roller bearings can be dropped right in
to replace competitive units.
Call your Browning distributor today…the
power transmission specialist. Ask about
Browning bearing engineered solutions and
technical support services that are availalbe
and about information for other world class
Browning and EPT products.
ROLLING ELEMENTS
Browning manufacturers two types of roller
bearings. High capacity double row tapered roller
bearings are capable of combined radial and thrust
loads within the bearing capacity. General
purpose, double row spherical roller bearings are
designed to accommodate increased rotational
speeds and dynamic alignment.
LOCKING
Browning offers three types of shaft locking
devices. Single set screw locking and dual set
screw locking have one or two rugged lock collars
to reduce inner race distortion. Browning also
offers eccentric locking.
HOUSINGS
Roller bearing housings are segmented by style
and available as pillow blocks, three and four bolt
flanges, flange cartridges, and take-up units.
General purpose cast iron housings are offered
as well as high strength ductile units. 900, E920,
1000, and 1100 series are solid one piece units.
950, 970, 22200 and 22500 series have split
housings for quick replacement and fast mounting.
EXPANSION UNITS
For applications with shaft expansion due to
temperature differentials, 950, 970, 1000, 1100,
22200 and 22500 series roller bearings are all
offered with an expansion design to accommodate
shaft growth.
100 See page 156 for trademark acknowledgments.
BMB-07 Roller.pmd 100 5/21/2007, 6:31 AM

Bearings
CONTENTS
ROLLER BEARING CONTENTS
TAPERED ROLLER BEARINGS

900 Series Eccentric Lock ................................................... 104
E920 Series Set screw Lock ............................................... 110
950 Series Eccentric Lock ................................................... 118
970 Series Set screw Lock .................................................. 122
SPHERICAL ROLLER BEARINGS

1000 Series Set screw Lock ................................................ 128
1100 Series Set screw Lock ................................................ 136
22500 Series Adapter Mounted Bearing Units ..................... 140
Cast Iron Pillow Blocks ............................................... 142
Cast Steel Pillow Blocks ............................................. 144
22200 Series Cylindrical Bore Mounted Bearing Units
Cast Iron Pillow Blocks ............................................... 145
Cast Steel Pillow Blocks ............................................. 146
22500/22200 Accessories
22200 Adapter Bearings .............................................. 147
22500 Adapter Assemblies .......................................... 148
22200 Cylindrical Bore Bearings ................................. 149
22200 Cylindrical Bore Assemblies ............................. 149
Tactonite Seals & End Covers ..................................... 151
Heavy Duty Frames ..................................................... 153
BALL & ROLLER BEARING INTERCHANGE TABLES ........ 166
See page 156 for trademark acknowledgments. 101
BMB-07 Roller.pmd 101 5/21/2007, 6:31 AM

Tapered Roller Bearings
Dimensionally Tapered Roller Bearings

PB900
Interchangeable Allow for
with most Combination Radial and
Thrust Loads Eccentric Lock
Type E’s Collar
Centrap® Labyrinth
Seal
One Piece Ductile

Iron Housing
Elongated
Bolt Holes
to Facilitate
Mounting
PBE920
Contact Seal Concentric
Double Locking
Collars
One Piece
Cast Iron Housing
BROWNING
TAPERED ROLLER
BEARINGS
900/E920 SERIES Note: Other features are like the 900 series.
FEATURES/BENEFITS
BMB-07 Roller.pmd 102 5/21/2007, 6:31 AM

LOCKING BROWNING
900 ECCENTRIC LOCK
TAPERED ROLLER
Browning roller bearings
have an eccentric locking
collar that mates with the
BEARINGS
inner race for shaft hold.
One end of the inner race
is machined to a cam form
and the mating lock collar
900/E920 SERIES
has an off center
counterbore. The wedge
action of the collar on the
inner race secures the inner race to the shaft. This locking
method tends to tighten and grip the shaft and not leave
burrs as with setscrew collars.
FEATURES/BENEFITS
NOTE: Eccentric collars are not recommended for
reversing applications.
E920 SETSCREW LOCK HOUSING

This locking device has
two lock collars with two 900 HOUSING - 900 Series ductile iron
setscrews to anchor the housings are approximately twice as strong as
120°
bearing to the inner race. cast iron. This is an important feature in
The elastic deflection of applications such as sawmills where heavy
the collar serves to help loads and shock conditions are normally
retain the bearing hold to experienced. Elongated bolt holes in the
housing base permit easy replacement of
the shaft. Double locking DUCTILE competitive pillow blocks and more adjustment
collars with setscrews at
120° provide improved capability.
holding power and shaft lock especially in applications
with heavy vibration or unidirectional loads. Browning lock E920 HOUSING- Browning compact solid one
collars are black oxide coated for corrosion resistance. piece cast iron housings provide strength and
load support in a wide variety of applications.
Elongated bolt holes in the housing base permit
easy replacement of competitive pillow blocks
SEALS
and more adjustment capability.
CAST IRON
900 SEALS - CENTRAP labyrinth seals contain an angled

flinger that rotates with the shaft, creating a centrifugal force
to help keep out contamination. Excess grease purges
from the seal to help remove contaminants caught in the
TABLE OF CONTENTS
PB900 Pillow Blocks ........... 104
lubricant and prevent seal damage from over lubrication. FB900 Flange Blocks .......... 105
The non-contact labyrinth design reduces drag, saves FC900 Flange Cartridges ... 106
energy and normally cannot be blown by overgreasing. TU900 Take-Ups ................. 108
T900 Take-Up Frames ........ 109
900 Ratings ......................... 114
900 Interchange Tables ...... 166
PBE920 Pillow Blocks ......... 110

FBE920 Flange Blocks ....... 111
TUE900 Take-Ups ............... 112
T1000 Take-Up Frames ...... 113
E920 Ratings ....................... 115
E920 SEALS - Rubber contact face seals are designed to E920 Interchange Tables .... 166
retain lubricant and help exclude contaminants. The seal 950/970 ............................... 116
is designed with a long flexible face that seals axially 1000/1100 .......................... 126
against the counterface. The contact seal is self purging. 22200/22500 ....................... 140
It retains low torque characteristics and rotates with the
shaft to help reduce contaminant build-up on the seal. Its
low friction reduces heat generation and wear.
BMB-07 Roller.pmd 103 5/21/2007, 6:31 AM

Eccentric
900
PB900
Lock: Eccentric P PILLOW
Seal: CENTRAP® Labyrinth B BLOCK
Housing: Ductile Iron
Temperatures: -20°F to 200°F 9 900 SERIES
Fitting: 1/8” NPT 0 ECCENTRIC
Bearing Insert: Tapered Roller 0 TAPERED ROLLER BEARING
Load Rating Tables: Page 114 Dimensional Interchange

Interchange Tables: Page 166 with most Type E’s
Dimensions In Inches
SHAFT UNIT
DIA. IN E WT.
A B C D F G H J L R S V W
MIN. MAX.
TWO BOLT BASE
1 1 9/16 3 1/32 1 15/16 2 15/16 4 1/8 4 5/8 5 7/8 2 1/8 3/4 1/2 2 21/32 5/64 2 35/64 - - 4.4
1 3/16
1 1/4 1 3/4 3 13/32 2 3/16 3 5/16 4 1/2 5 6 3/8 2 1/4 3/4 1/2 2 13/16 1/16 2 3/4 - - 5.7
1 3/8
1 7/16
1 7/8 3 5/8 2 3/16 3 1/2 4 3/4 5 7/8 7 1/4 2 1/4 1 1/2 2 7/8 1/16 2 13/16 - - 6.3
1 1/2
1 5/8
1 15/16 2 1/8 4 2 1/2 3 3/4 5 1/4 6 3/8 7 3/4 2 3/8 1 1/8 1/2 2 15/16 1/8 2 13/16 - - 7.7
1 3/4
1 7/8
1 15/16
2 1/4 4 17/32 3 4 9/16 6 7 1/8 8 7/8 2 7/16 1 1/4 5/8 3 5/32 3/32 3 1/16 - - 11.2
2
2 1/8
2 3/16 2 1/2 4 31/32 3 3/8 4 15/16 6 1/2 7 7/8 9 5/8 2 1/2 1 1/4 5/8 3 7/32 3/32 3 1/8 - - 13.1
2 1/4
2 7/16 2 3/4 5 5/8 3 3/8 5 1/4 6 7/8 8 5/8 10 3/8 2 13/16 1 3/8 5/8 3 29/64 5/32 3 1/4 - - 16.3
2 1/2
2 11/16
2 3/4 3 1/8 6 1/16 4 5 7/8 7 7/8 9 5/8 11 5/8 2 5/8 1 3/8 3/4 3 15/32 3/32 3 3/8 - - 19.9
2 15/16
3
3 5/16 6 9/16 4 1/4 6 1/2 8 3/8 9 3/4 11 3/4 3 1/8 1 5/8 3/4 3 31/32 3/32 3 7/8 - - 26..8
3 3/16
3 7/16
3 3/4 7 3/8 4 11/16 7 1/4 9 3/8 11 1/4 13 1/2 3 1/8 1 7/8 7/8 4 5/64 1/16 4 - - 34.1
3 1/2
3 15/16
4 1/8 8 5 1/4 7 3/4 10 1/16 11 11/16 14 1/4 3 7/8 2 1 4 29/32 5/32 4 3/4 - - 47.7
4
FOUR BOLT BASE
4 7/16
4 3/4 9 1/8 6 1/8 8 3/4 11 3/4 13 3/4 15 7/8 4 1/2 2 1/4 3/4 5 7/16 1/16 5 3/16 2 1/2 4 1/8 65.0
4 1/2
4 15/16
5 1/2 10 1/16 6 5/8 9 1/8 13 3/4 15 3/4 18 1/8 5 2 1/2 7/8 5 27/32 3/32 5 3/8 2 3/4 4 1/4 77.0
5
Part Numbers are specified by “PB900” and bore size: Example PB900x 1 3/16”.
Bearings with Eccentric Locking Collars are not recommended for reversing applications.
BMB-07 Roller.pmd 104 5/21/2007, 6:31 AM

Eccentric
900
FLANGE F Lock:
FB900
Eccentric
BLOCK B Seal: CENTRAP® Labyrinth
900 SERIES 9 Temperatures: -20°F to 200°F
ECCENTRIC LOCK 0 Fitting: 1/8” NPT
TAPERED ROLLER BEARING 0 Bearing Insert: Tapered Roller
Dimensional Interchange Load Rating Tables: Page 114

with most Type E’s Interchange Tables: Page 166
SHAFT UNIT
DIA. IN. B B.C. C D E H J L M R S WT.
1 3 5/8 3 7/8 1 15/16 2 15/16 2 3/4 9/16 3/8 2 23/32 2 1/8 11/64 2 35/64 3.9
1 3/16
1 1/4 3 7/8 4 1/4 2 3/16 3 1/4 3 5/8 3/8 2 15/16 2 3/8 11/64 2 3/4 4.9
1 3/8
1 7/16
4 9/16 4 61/64 2 3/16 3 7/16 3 1/2 3/4 1/2 3 2 3/8 11/64 2 13/16 5.5
1 1/12
1 5/8
1 11/16 5 1/4 5 53/64 2 1/2 3 11/16 4 1/8 7/8 1/2 3 1/16 2 1/2 1/4 2 13/16 7.0
1 3/4 1/4
1 7/8
1 15/16
5 1/2 6 3/16 3 4 1/2 4 3/8 7/8 1/2 3 9/32 2 9/16 7/32 3 1/16 10.2
2
2 1/8
2 3/16 6 3/16 6 57/64 3 3/8 4 7/8 4 7/8 1 5/8 3 11/32 2 5/8 7/32 3 1/8 12.3
2 1/4
2 7/16 6 3/4 7 19/32 3 3/8 5 3/16 5 3/8 1 5/8 3 29/64 2 11/16 13/64 3 1/4 14.8
2 1/2
2 11/16
2 3/4 7 5/8 8 31/64 4 5 3/4 6 1 1/16 3/4 3 19/32 2 3/4 7/32 3 3/8 18.7
2 15/16
3
7 7/8 8 53/64 4 1/4 6 3/8 6 1/4 1 1/4 3/4 4 5/32 3 5/16 9/32 3 7/8 26.2
3 3/16
3 7/16
8 5/8 9 57/64 4 11/16 7 1/8 7 1 5/16 3/4 4 17/64 3 5/16 17/64 4 33.1
3 1/2
3 15/16
9 7/8 10 61/64 5 1/4 7 11/16 7 3/4 1 1/2 7/8 5 3/32 4 1/16 21/64 4 3/4 47.1
4
4 7/16
10 7/8 12 3/8 6 1/8 8 3/4 8 3/4 1 1/2 7/8 5 7/16 4 5/16 1/4 5 3/16 64.0
4 1/2
Part Numbers are specified by “FB900” and bore size: Example FB900x 1 3/16”.
BMB-07 Roller.pmd 105 5/21/2007, 6:31 AM

Eccentric
900
FC900
Lock: Eccentric F FLANGE
Seal: CENTRAP Labyrinth C CARTRIDGE
Housing: Cast Iron
Temperatures: -20°F to 200°F 9 900 SERIES
Fitting: 1/8” NPT 0 ECCENTRIC LOCK
Load Rating Tables: Page 114 Dimensional Interchange

Interchange Tables: Page 166 with most Type E’s
SHAFT UNIT
DIA. IN. B C D E F G H J L M S WT.
1 4 3/8 1 15/16 2 15/16 3 5/8 15/16 3 7/16 5/16 2 19/32 1 1/16 2 35/64 4.0
1 3/16
1 1/4 5 2 3/16 3 1/4 4 1/8 1 3 3/8 7 16 3/8 2 13/16 1 1/4 2 3/4 5.3
1 3/8
1 7/16
5 1/4 2 3/16 3 7/16 4 3/8 15/16 3 5/8 1/2 3/8 2 7/8 1 5/16 2 13/16 6.0
1 1/12
1 5/8
1 11/16 6 1/8 2 1/2 3 11/16 5 1/8 1 1/16 4 1/4 1/2 3/8 2 15/16 1 5/16 2 13/16 7.9
1 3/4
1 7/8
1 15/16
6 3/8 3 4 1/2 5 3/8 1 1/16 4 1/2 9/16 3/8 3 5/32 1 3/8 3 1/16 10.0
2
2 18
2 3/16 7 1/8 3 3/8 4 7/8 6 1 1/8 5 9/16 1/2 3 7/32 1 3/8 3 1/8 14.0
2 1/4
2 7/16 7 5/8 3 3/8 5 3/16 6 1/2 1 1/8 5 1/2 5/8 1/2 3 21/64 17/16 3 1/4 15.5
2 1/2
2 11/16
2 3/4 8 3/4 3 7/16 5 3/4 7 1/2 1 1/4 6 3/8 3/4 5/8 3 15/32 1 3/8 3 3/8 21.6
2 15/16
3
8 3/4 4 1/4 6 3/8 7 1/2 1 7/16 6 3/8 3/4 5/8 3 31/32 1 11/16 3 7/8 31.0
3 3/16
3 7/16
10 1/4 4 11/16 7 1/8 8 5/8 1 5/16 7 3/8 15/16 3/4 4 5/64 1 13/16 4 40.0
3 1/2
Part Numbers are specified by “FC900” and bore size: Example FC900x 1 3/16”.
BMB-07 Roller.pmd 106 5/21/2007, 6:32 AM

Roller Bearings Part Number
Series (900, E920, 970, 950)
Explanation
PB 900 F NE X 2 7/16
Bore Size (inches) Take-Up Frames
Expansion (E950 & 970)
12 T 900 D
NE = Non-expansion Compatible with Bore Range
E = Expansion D = Up to 2”
Pillow Block Bolts (E920) E = 2 3/16”
F = Four Bolts EL = 2 3/16”
Series EH = 2 3/16”
900 = Eccentric F = 2 1/4” to 2 1/2”
E920 = Set Screw G = 2 11/16” to 2 15/16”
950 = Eccentric Split Housing GH = 2 15/16”
970 = Set Screw Split Housing GL = 2 15/16”
H = 2 3/16”
Housing J = 3 7/16” to 3 1/2”
PB = Pillow Block JH = 3 7/16”
FB = Four Bolt Flange JL = 3 7/16”
FC = Flange Cartridge (900) K = 3 15/16” to 4”
TU = Take-Up (900 & E920)
C = Cartridge Insert (950 & 970) Series
900 = Top Angle (TU900)
1000 = Center Pull (TUE920)
Take-Up Frame
Spherical Roller Bearings Nominal Adjustment (Inches)
Series (1000, 1100)
S PB 1000 F NE C X 2 7/16”
Bore Size (inches)
Contact Seal
Expansion
NE = Non-expansion
E = Expansion
Pillow Block Bolts
F = Four Bolts
Series
1000 = Cast Iron Set Screw
Spherical Roller Bearings
1100 = Ductile Iron Set Screw Series (22500, 22200)
Housing S PB T S 22 500 X 2 7/16”

PB = Pillow Block
FB = Four Bolt Flange
FC = Flange Cartridge
TU = Take-Up
Spherical Spherical Roller
Pillow Block
Pillow Block (Bolts)
T = Two Bolts
F = Four Bolts
Housing Material
S = Cast Steel Housing
Series
222 = Cylindrical Locking
225 = Tapered Adapter
Mounting Bearing Size
Bore Size (inches)
BMB-07 Roller.pmd 107 5/21/2007, 6:32 AM

Eccentric
900
TU900
Lock: Eccentric T TAKE
Seal: CENTRAP Labyrinth U UP
Temperatures: - 20°F to 200°F 9 900 SERIES
Fitting: 1/8” NPT 0 ECCENTRIC LOCK
Load Rating Tables: Page 114

Interchange Tables: Page 166
SHAFT UNIT
DIA. IN. A B C D E F G J L M N R S W WT.
1 7/8
1 15/16
3 9/32 6 3/8 3 4 2 17/32 3 3/32 2 7/16 7/16 3 5/32 1 11/16 1 61/64 3/32 3 1/16 5 1/2 13.9
2
2 1/8
2 3/16 3 17/32 6 15/16 3 3/8 4 2 27/32 3 13/32 2 1/2 7/16 3 7/32 1 11/16 2 5/64 3/32 3 1/8 6 16.6
2 1/4
2 7/16 3 23/32 7 9/16 3 3/8 4 5/8 3 3/32 3 27/32 2 9/16 9/16 3 21/64 1 7/8 2 9/64 5/64 3 1/4 6 1/2 19.6
2 1/2
2 11/16
2 3/4 4 1/32 8 3/16 4 4 5/8 3 7/16 4 5/32 2 5/8 9/16 3 15/32 1 7/8 2 13/64 3/32 3 3/8 7 24.0
2 15/16
3 7/16
4 49/64 9 7/8 4 11/16 5 3/4 4 11/64 5 7/64 3 1/8 11/16 4 5/64 2 1/4 2 11/16 5/64 4 8 1/2 41.8
3 1/2
3 15/16
5 17/32 10 7/8 5 1/4 5 3/4 4 15/32 5 11/32 3 7/8 11/16 4 29/32 2 1/4 3 9/32 5/32 4 3/4 9 1/4 61.0
4
Part Numbers are specified by “TU900” and bore size: Example TU900x 1 3/16”.
BMB-07 Roller.pmd 108 5/21/2007, 6:32 AM

TAKE UP FRAME T
T900
900 SERIES 9
ECCENTRIC LOCK 0
TAPERED ROLLER BEARING 0
Adjustment* Dimensions In Inches

FRAME
PART BORE UNIT
NO. RANGE Nominal Actual A B C E F G H J K L U V WT.
12T 900D 1 7/8-2 12 15 1/2 3 15/16 26 1/2 2 15/16 8 3/8 3 11/16 3 1/2 7/8 5/8 1 28 1/2 5 1/2 - 31.5
18T 900D 1 7/8-2 18 21 1/2 3 15/16 32 1/2 2 15/16 8 3/8 3 11/16 3 1/2 7/8 5/8 1 34 1/2 5 1/2 - 37.2
24T 900D 1 7/8-2 24 27 1/2 3 15/16 38 1/2 2 15/16 8 3/8 3 11/16 3 1/2 7/8 5/8 1 40 1/2 5 1/2 - 41.7
12T 900E 2 3/16 12 16 1/2 4 3/16 27 1/2 3 11/32 8 15/16 3 23/32 3 1/2 7/8 5/8 1 29 1/2 5 1/2 - 32.8
18T 900E 2 3/16 18 22 1/2 4 3/16 33 1/2 3 11/32 8 15/16 3 23/32 3 1/2 7/8 5/8 1 35 1/2 5 1/2 - 38.6
24T 900E 2 3/16 24 28 1/2 4 3/16 39 1/2 3 11/32 8 15/16 3 23/32 3 1/2 7/8 5/8 1 41 1/2 5 1/2 - 44.6
12T 900F 2 1/4-2 1/2 12 16 4 3/8 28 1/2 3 7/16 9 21/32 4 3/64 4 7/8 3/4 1 5/16 30 1/2 6 1/4 - 43.8
18T 900F 2 1/4-2 1/2 18 22 4 3/8 34 1/2 3 7/16 9 21/32 4 3/64 4 7/8 3/4 1 5/16 36 1/2 6 1/4 - 50.0
24T 900F 2 1/4-2 1/2 24 28 4 3/8 40 1/2 3 7/16 9 21/32 4 3/64 4 7/8 3/4 1 5/16 42 1/2 6 1/4 - 55.0
12T900G 2 11/16-2 15/16 12 17 1/2 5 30 1/2 3 31/32 10 11/16 4 1/2 4 1/2 7/8 5/8 1 32 1/2 6 1/2 2 56.5
18T900G 2 11/16-2 15/16 18 23 1/2 5 36 1/2 3 31/32 10 11/16 4 1/2 4 1/2 7/8 5/8 1 38 1/2 6 1/2 2 63.5
24T900G 2 11/16-2 15/16 24 29 1/2 5 42 1/2 3 31/32 10 11/16 4 1/2 4 1/2 7/8 5/8 1 44 1/2 6 1/2 2 72.5
12T 900J 3 7/16-3 1/2 12 17 5/8 5 1/2 32 4 12 7/32 4 49/64 4 1/2 7/8 3/4 1 34 1/4 7 1/8 2 72.0
18T 900J 3 7/16-3 1/2 18 23 5/8 5 1/2 38 4 12 7/32 4 49/64 4 1/2 7/8 3/4 1 40 1/4 7 1/8 2 78.0
24T 900J 3 7/16-3-1/2 24 29 5/8 5 1/2 44 4 12 7/32 4 49/64 4 1/2 7/8 3/4 1 46 1/4 7 1/8 2 85.0
12T 900K 3 15/16-4 12 20 1/8 7 36 4 1/2 14 1/16 5 23/32 5 1/2 7/8 3/4 1 38 1/2 7 7/8 2 1/2 76.0
18T 900K 3 15/16-4 18 26 1/8 7 42 4 1/2 14 1/16 5 23/32 5 1/2 7/8 3/4 1 44 1/2 7 7/8 2 1/2 85.0
24T 900K 3 15/16-4 24 32 1/8 7 48 4 1/2 14 1/16 5 23/32 5 1/2 7/8 3/4 1 50 1/2 7 7/8 2 1/2 94.0
Part Numbers are specified by “T900” with travel adjustment and bore size: Example, 12T900F has 12”-16” adjustment and will accommodate a
TU900x 2 1/4” - TU900x 2 1/2” bearing unit.
These Take-Up Frames are to be used with Take-Up Units shown on page 108.
Bearing unit and frame must be ordered separately.
BMB-07 Roller.pmd 109 5/21/2007, 6:32 AM

Set Screw
E920
PBE920 Tapered Roller Bearings

Lock: Set Screw P PILLOW
Seal: Contact B BLOCK
Housing: Cast Iron E TYPE ‘E’
Temperatures: -20° to 200°F
Fitting: 1/8” NPT 9 920
Bearing Insert: Tapered Roller 2 SET SCREW LOCK
0 TAPERED ROLLER BEARING
Interchange Tables: Page 166 Dimensional Interchange
with most Type E’s
Dimensions in Inches
SHAFT TYPE UNIT
DIA. IN. E WT.
A B C D F G H J P S V W
MIN MAX
TWO BOLT BASE
1 3/16
SR 1 1/2 3 2 1/4 3 4 5/16 5 6 3/8 1 7/8 7/8 1/2 29/64 2 25/32 - 1 7/8 4.0
1 1/4
1 3/8
SR 1 7/8 3 3/4 2 3/4 3 5/8 5 6 7 3/8 2 1/8 1 1/8 1/2 7/16 3 - 2 1/8 6.9
1 7/16
1 1/2
1 5/8 SR 2 1/8 4 1/4 3 3/16 4 1/4 5 11/16 6 1/2 7 7/8 2 1/2 1 1/4 1/2 15/32 3 3/8 - 2 1/2 9.5
1 11/16
1 3/4
1 15/16 SR 2 1/4 4 1/2 3 7/16 4 1/2 6 3/16 7 1/4 8 7/8 2 1/2 1 1/4 5/8 1/2 3 1/2 - 2 1/2 11.0
2
2 3/16 SR 2 1/2 5 3 3/4 5 6 11/16 8 9 5/8 2 5/8 1 7/16 5/8 9/16 3 3/4 - 2 5/8 14.0
2 1/4
2 7/16 SR 2 3/4 5 1/2 4 1/16 5 3/8 7 1/8 8 3/4 10 1/2 2 7/8 1 5/8 5/8 9/16 4 - 2 7/8 19.0
2 1/2
2 11/16
2 3/4
SR 3 1/8 6 1/4 4 23/32 6 1/4 8 7/16 9 3/4 12 3 1 3/4 3/4 3/4 4 1/2 - 3 26.0
2 15/16
3
3 3/16
3 7/16 LN 3 3/4 7 1/2 5 7/16 7 5/8 9 3/4 11 1/2 14 3 5/8 2 1/8 7/8 11/16 5 - 3 5/8 44.0
3 1/2
FOUR BOLT BASE
2 1/4
2 7/16 SR 2 3/4 5 1/2 4 1/16 5 3/8 7 1/8 8 3/4 10 1/2 3 1/2 1 5/8 5/8 9/16 4 1 7/8 2 7/8 19.0
2 1/2
2 11/16
2 3/4
SR 3 1/8 6 1/4 4 23/32 6 1/4 8 9 7/8 12 4 1 3/4 5/8 3/4 4 1/2 2 1/8 3 26.0
2 15/16
3
3 3/16
3 7/16 LN 3 3/4 7 1/2 5 7/16 7 1/2 9 11/16 11 7/16 14 4 1/2 2 1/8 3/4 11/16 5 2 3/8 3 5/8 44.0
3 1/2
3 15/16
LN 4 1/4 8 1/2 5 15/16 8 1/2 10 7/16 12 7/8 15 1/4 4 1/2 2 7/16 3/4 7/8 6 1/4 2 1/4 4 1/2 65.0
4
4 7/16
LN 4 3/4 9 3/8 6 13/32 9 1/8 11 1/4 13 7/8 16 5/8 4 5/8 2 3/4 3/4 1 1/16 6 3/4 2 1/2 4 5/8 81.0
4 1/2
4 15/16
LN 5 1/2 10 7/8 7 13/32 10 3/4 13 15 7/8 18 1/2 5 1/8 3 1/8 7/8 1 1/16 7 1/4 2 3/4 5 1/8 132.0
5
Part Numbers are specified by “PBE920” and bore size: Example, PBE920x 1 3/16”.
Add “F” for Four Bolt Base: Example, PBE920Fx 2 7/16”.
BMB-07 Roller.pmd 110 5/21/2007, 6:32 AM

Set Screw
E920
FBE920
FLANGE F Lock: Set Screw
BLOCK B Seal: Contact
TYPE ‘E’ E Housing: Cast Iron
920 9 Fitting: 1/8” NPT
SET SCREW LOCK 2 Bearing Insert: Tapered Roller
TAPERED ROLLER BEARING 0
Dimensional Interchange Interchange Tables: Page 166
SHAFT TYPE UNIT
DIA. IN. B B.C C D E H J L M P S WT.
1 3/16
SR 3 3/4 4 1/16 2 1/4 3 2 7/8 1 1/32 3/8 2 27/32 2 3/8 15/32 2 25/32 4.5
1 1/4
1 3/8
SR 4 5/8 4 61/64 2 3/4 3 5/8 3 1/2 1 1/16 1/2 3 5/64 2 5/8 29/64 3 6.7
1 7/16
1 1/2
1 5/8 SR 5 3/8 5 53/64 3 3/16 4 1/4 4 1/8 1 3/16 1/2 3 29/64 3 29/64 3 3/8 10.0
1 11/16
1 3/4
1 15/16 SR 5 5/8 6 3/16 3 7/16 4 1/2 4 3/8 1 3/16 1/2 3 5/8 3 1/8 1/2 3 1/2 12.0
2
2 3/16 SR 6 1/4 6 57/64 3 3/4 4 7/8 4 7/8 1 1/4 5/8 3 7/8 3 5/16 9/16 3 3/4 16.0
2 1/4
2 7/16 SR 6 7/8 7 39/64 4 1/16 5 1/4 5 3/8 1 1/2 5/8 4 3/16 3 5/8 9/16 4 21.0
2 1/2
2 11/16
2 3/4
SR 7 3/4 8 31/64 4 23/32 6 1/8 6 1 5/8 3/4 4 11/16 3 15/16 3/4 4 1/2 28.0
2 15/16
3
3 3/16
3 7/16 LN 9 1/4 9 29/32 5 7/16 7 1/2 7 1 7/8 3/4 5 1/4 4 9/16 11/16 5 46.0
3 1/2
3 15/16 10
LN 10 1/4 31/32 5 15/16 8 1/4 7 3/4 2 3/16 7/8 6 9/16 5 11/16 7/8 6 1/4 64.0
4
Part Numbers are specified by “FBE920” and bore size: Example, FBE920x 1 3/16”.
BMB-07 Roller.pmd 111 5/21/2007, 6:32 AM

Set Screw
E920
TUE920
Lock: Set Screw T TAKE
Seal: Contact U UP
Housing: Cast Iron E TYPE ‘E’
Fitting: 1/8” NPT 9 920
Bearing Insert: Tapered Roller 2 SET SCREW LOCK
0 TAPERED ROLLER BEARING
Dimensional Interchange
SHAFT UNIT
DIA. IN. A C D E F G J K L N P S WT.
*1 3/8
1 29/32 11/16 4 1/8 3 1/2 5/8 13/16 2 7/16 2 3/4 5 3/32 3 1 1/2 17/32 6.0
*1 7/16
1 1/2
2 1/8 5/8 4 3/4 4 1 1/16 1 1/16 2 7/8 3 1/4 6 3 3/8 1 11/16 11/16 9.0
1 11/16
1 3/4
1 15/16 2 1/8 3/4 4 3/4 4 1 1/16 1 1/16 2 7/8 3 1/2 6 3/16 3 1/2 1 3/4 11/16 12.0
2
2 3/16 2 3/8 3/4 5 1/4 4 1/2 1 3/16 1 3/16 3 1/2 3 3/4 6 13/16 3 3/4 1 7/8 13/16 16.0
2 7/16
2 3/4 7/8 5 7/8 5 1/8 1 5/16 1 5/16 3 3/4 4 3/4 7 15/16 4 2 1 1/16 21.0
2 1/2
2 11/16
2 3/4 3 1 6 3/4 5 15/16 1 9/16 1 9/16 4 1/4 4 3/4 8 3/4 4 1/2 2 1/4 1 13/16 30.0
2 15/16
3 7/16 3 5/8 1 7 5/8 6 13/16 1 13/16 1 13/16 4 7/8 6 1/4 10 7/16 5 2 1/2 1 13/16 44.0
3 15/16 4 1/8 1 1/8 9 7/16 8 5/8 2 1/8 2 3/16 5 5/8 7 11 13/16 6 1/4 3 1/8 2 1/16 70.0
4 7/16 4 1/8 1 1/8 9 7/16 8 5/8 2 1/8 2 3/16 5 5/8 7 11 13/16 6 3/4 3 3/8 2 1/16 74.0
Part Numbers are specified by “TUE920” and bore size: Example, TUE920x 1 3/16”.
These Take-Up Bearings are to be used with Take-Up Frames shown on page 113.
* Take -Up frames not available in these sizes.
BMB-07 Roller.pmd 112 5/21/2007, 6:32 AM

TAKE UP FRAME T Material:
T1000 All Steel
Construction
1000 SERIES 1
0 Exclusive Design: Removable Top
0 Permits Assembling
0 of Take-Up Unit on
Shaft Before
Inserting in Take-Up
Frame.
SHAFT FRAME Adjustment* Dimensions In Inches Bolts Req'd

UNIT
DIA. PART
IN NO. Nom. Actual A B BB C E G H K L M S P U V W No. Siz e J WT.
1 1/2
1 11/16
1 3/4 12-16.5T1000D 12 16.5 3 15/16 27 1/2 26 1/2 1 8 9/32 4 1 1/4 - 29 1/2 1 7/8 1-8NC 1 1/4 5 3/8 - 5 5/8 2 5/8 60
1 15/16 18-22.5T1000D 18 22.5 3 15/16 33 1/2 32 1/2 1 8 9/32 4 1 1/4 - 35 1/2 1 7/8 1-8NC 1 1/4 5 3/8 - 5 5/8 2 5/8 70
2 24-28.5T1000D 24 28.5 3 15/16 39 1/2 38 1/2 1 8 9/32 4 1 1/4 - 41 1/2 1 7/8 1-8NC 1 1/4 5 3/8 - 5 5/8 2 5/8 80
2 3/16 12-17T1000EL 12 17 4 3/16 27 1/2 - 1 8 21/32 4 1 3/8 - 29 1/2 2 1 1/8-7NC 1 5/8 4 9/16 - 5 15/16 2 5/8 65
18-23T1000EL 18 23 4 3/16 33 1/2 - 1 8 21/32 4 1 3/8 - 35 1/2 2 1 1/8-7NC 1 5/8 4 9/16 - 5 15/16 2 5/8 77
24-29T1000EL 24 29 4 3/16 39 1/2 - 1 8 21/32 4 1 3/8 - 41 1/2 2 1 1/8-7NC 1 5/8 4 9/16 - 5 15/16 2 5/8 86
2 3/16 12-17T1000EH 12 17 4 7/16 27 1/2 - 1 8 29/32 4 1 5/8 - 29 1/2 2 1 1/8-7NC 1 5/8 4 9/16 - 5 15/16 2 5/8 68
18-23T1000EH 18 23 4 7/16 33 1/2 - 1 8 29/32 4 1 5/8 - 35 1/2 2 1 1/8-7NC 1 5/8 4 9/16 - 5 15/16 2 5/8 80
24-29T1000EH 24 29 4 7/16 39 1/2 - 1 8 29/32 4 1 5/8 - 41 1/2 2 1 1/8-7NC 1 5/8 4 9/16 - 5 15/16 2 5/8 91
2 7/16 12-16.6T1000F 12 16.6 4 3/8 28 1/2 - 1 9 3/16 4 1 1/8 - 30 1/2 2 1/8 1 1/4-7NC 1 3/4 5 5/16 - 6 9/16 2 3/4 71
18-22.6T1000F 18 22.6 4 3/8 34 1/2 - 1 9 3/16 4 1 1/8 - 36 1/2 2 1/8 1 1/4-7NC 1 3/4 5 5/16 - 6 9/16 2 3/4 81
24-28.6T1000F 24 28.6 4 3/8 40 1/2 - 1 9 3/16 4 1 1/8 - 42 1/2 2 1/8 1 1/4-7NC 1 3/4 5 5/16 - 6 9/16 2 3/4 91
30-34.6T1000F 30 34.6 4 3/8 46 1/2 - 1 9 3/16 4 1 1/8 - 48 1/2 2 1/8 1 1/4-7NC 1 3/4 5 5/16 - 6 9/16 2 3/4 111
2 15/16 12-15.5T1000GL 12 15.5 4 15/16 30 1/2 - 1 10 11/16 5 31/32 1 1/2 32 1/2 2 3/8 1 1/2-6NC 1/2 6 1/2 2 8 1/2 4 5/8 105
18-21.5T1000GL 18 21.5 4 15/16 36 1/2 - 1 10 11/16 5 31/32 1 1/2 38 1/2 2 3/8 1 1/2-6NC 1/2 6 1/2 2 8 1/2 4 5/8 120
24-27.5T1000GL 24 27.5 4 15/16 42 1/2 - 1 10 11/16 5 31/32 1 1/2 44 1/2 2 3/8 1 1/2-6NC 1/2 6 1/2 2 8 1/2 4 5/8 135
30-33.5T1000GL 30 33.5 4 15/16 48 1/2 - 1 10 11/16 5 31/32 1 1/2 50 1/2 2 3/8 1 1/2-6NC 1/2 6 1/2 2 8 1/2 4 5/8 150
2 15/16 12-15.5T1000GH 12 15.5 5 1/8 30 1/2 - 1 10 7/8 5 1 5/32 1 1/2 32 1/2 2 3/8 1 1/2-6NC 1/2 6 1/2 2 8 1/2 4 5/8 109
18-21.5T1000GH 18 21.5 5 1/8 36 1/2 - 1 10 7/8 5 1 5/32 1 1/2 38 1/2 2 3/8 1 1/2-6NC 1/2 6 1/2 2 8 1/2 4 5/8 126
24-27.5T1000GH 24 27.5 5 1/8 42 1/2 - 1 10 7/8 5 1 5/32 1 1/2 44 1/2 2 3/8 1 1/2-6NC 1/2 6 1/2 2 8 1/2 4 5/8 141
30-33.5T1000GH 30 33.5 5 1/8 48 1/2 - 1 10 7/8 5 1 5/32 1 1/2 50 1/2 2 3/8 1 1/2-6NC 1/2 6 1/2 2 8 1/2 4 5/8 156
3 7/16 12-15.5T1000JL 12 15.5 5 7/16 32 - 1 1/8 11 5/8 5 1 1/32 1 1/2 34 1/4 2 19/32 1 3/4-5NC 1 7 5/16 2 9 3/16 4 3/4 138
18-21.5T1000JL 18 21.5 5 7/16 38 - 1 1/8 11 5/8 5 1 1/32 1 1/2 40 1/4 2 19/32 1 3/4-5NC 1 7 5/16 2 9 3/16 4 3/4 156
24-27.5T1000JL 24 27.5 5 7/16 44 - 1 1/8 11 5/8 5 1 1/32 1 1/2 46 1/4 2 19/32 1 3/4-5NC 1 7 5/16 2 9 3/16 4 3/4 173
30-33.5T1000JL 30 33.5 5 7/16 50 - 1 1/8 11 5/8 5 1 1/32 1 1/2 52 1/4 2 19/32 1 3/4-5NC 1 7 5/16 2 9 3/16 4 3/4 191
3 7/16 12-15.5T1000JH 12 15.5 5 5/8 32 - 1 1/8 11 13/16 5 1 7/32 1 1/2 34 1/4 2 19/32 1 3/4-5NC 1 7 5/16 2 9 3/16 4 3/4 145
18-21.5T1000JH 18 21.5 5 5/8 38 - 1 1/8 11 13/16 5 1 7/32 1 1/2 40 1/4 2 19/32 1 3/4-5NC 1 7 5/16 2 9 3/16 4 3/4 163
24-27.5T1000JH 24 27.5 5 5/8 44 - 1 1/8 11 13/16 5 1 7/32 1 1/2 46 1/4 2 19/32 1 3/4-5NC 1 7 5/16 2 9 3/16 4 3/4 179
30-33.5T1000JH 30 33.5 5 5/8 50 - 1 1/8 11 13/16 5 1 7/32 1 1/2 52 1/4 2 19/32 1 3/4-5NC 1 7 5/16 2 9 3/16 4 3/4 197
3 15/16 12-18T1000K 12 18 7 36 - 1 1/4 14 15/32 6 1 7/16 1 3/4 38 1/2 2 31/32 2-4 1/2NC 1 5/8 7 1/2 2 1/2 10 7/16 4 3/4 191
4 7/16 18-24T1000K 18 24 7 42 - 1 1/4 14 15/32 6 1 7/16 1 3/4 44 1/2 2 31/32 2-4 1/2NC 1 5/8 7 1/2 2 1/2 10 7/16 4 3/4 223
4 1/2 24-30T1000K 24 30 7 48 - 1 1/4 14 15/32 6 1 7/16 1 3/4 50 1/2 2 31/32 2-4 1/2NC 1 5/8 7 1/2 2 1/2 10 7/16 4 3/4 249
30-36T1000K 30 36 7 54 - 1 1/4 14 15/32 6 1 7/16 1 3/4 56 1/2 2 31/32 2-4 1/2NC 1 5/8 7 1/2 2 1/2 10 7/16 4 3/4 274
Part Numbers are specified by “T1000” with travel adjustment and bore size: Example, 12-16.6T1000F has 12”-16.6” adjustment
and will accommodate a TUE920x 2 7/16” bearing unit.
These Take-Up Frames are to be used with Take-Up Units shown on page 112.
* Nominal adjustment is that offered by competitive frames having the same length.
Browning frames give greater ACTUAL adjustment, often permitting use of shorter, more compact frames.
Browning frames with over 12” nominal adjustment have a third foot in the center for extra support.
BMB-07 Roller.pmd 113 5/21/2007, 6:32 AM

Tapered Roller Bearing 900 and 950 Series
This chart displays the Browning 900 and 950 Series Tapered Roller Bearing’s load capacity for a given L10 life, speed and shaft size. Values in
the table represent loads at ideal conditions. The shaded areas indicate the maximum speed for the 950 series only. Select 950 Series where
aligning capability is required. For combined load determination, see THE BEARING SELECTION SECTION, page 268. Areas designated by “-
” exceed maximum speed value.
Match Bore Size

REVOLUTIONS PER MINUTE
"K" 2 ROW 1 ROW THRUST L10
SIZE FACTOR RATING RATING RATING* HOURS 50 100 150 250 500 750 1000 1500 1750 2000 2500 3000 3500
1 1.42 3700 2130 1500 5000 4179 4179 4179 3908 3174 2811 2578 2283 2180 2094 1959 1854 1771
10000 4179 4179 3700 3174 2578 2283 2094 1854 1771 1701 1591 1506 1438
30000 3700 3005 2611 2283 1854 1642 1506 1334 1273 1223 1144 1083 1034
50000 3174 2578 2283 1959 1591 1409 1292 1144 1093 1050 982 929 887
100000 2578 2094 1854 1591 1292 1144 1050 929 887 853 797 755 721
1 3/16 1.53 5130 2950 1930 5000 5794 5794 5794 5418 4401 3897 3575 3165 3022 2904 2716 2571 2455
1 1/4 10000 5794 5794 5130 4401 3575 3165 2904 2571 2455 2358 2206 2088 1944
1 3/8 30000 5130 4167 3690 3165 2571 2277 2088 1849 1766 1696 1586 1502 1434
50000 4401 3575 3165 2716 2206 1953 1792 1586 1515 1455 1361 1289 1230
100000 3575 2904 2571 2206 1792 1586 1455 1289 1230 1182 1106 1047 999
1 7/16 1.46 5930 3410 2330 5000 6697 6697 6697 6263 5087 4505 4132 3659 3494 3356 3139 2972 —
1 1/2 10000 6697 6697 5930 5087 4132 3659 3356 2972 2838 2726 2550 2414 —
30000 5930 4817 4265 3659 2972 2632 2414 2138 2041 1961 1834 1736 —
50000 5087 4132 3659 3139 2550 2258 2071 1834 1751 1682 1573 1490 —
100000 4132 3356 2972 2550 2071 1834 1682 1490 1422 1366 1278 1210 —
1 5/8 1.37 6050 3470 2540 5000 6833 6833 6833 6390 5190 4596 4216 3733 3564 3424 3203 — —
1 11/16 10000 6833 6833 6050 5190 4216 3733 3424 3032 2895 2781 2601 — —
1 3/4 30000 6050 4914 4351 3733 3032 2685 2463 2181 2082 2000 1871 — —
50000 5190 4216 3733 3203 2601 2303 2113 1871 1786 1716 1605 — —
100000 4216 3424 3032 2601 2113 1871 1716 1520 1451 1394 1304 — —
1 7/8 1.65 8550 4910 2980 5000 9656 9656 8656 9031 7335 6495 5958 5276 5037 4839 — — —
1 15/16 10000 9656 9656 8550 7335 5958 5276 4839 4285 4091 3931 — — —
2 30000 8550 6945 6149 5276 4285 3794 3481 3082 2943 2827 — — —
2 1/8 50000 7335 5958 5276 4526 3676 3255 2986 2644 2525 2425 — — —
100000 5958 4839 4285 3676 2986 2644 2425 2148 2051 1970 — — —
2 3/16 1.51 9090 5220 3470 5000 10266 10266 10266 9601 7798 6905 6334 5609 5355 5145 — — —
10000 10266 10266 9090 7798 6334 5609 5145 4556 4350 4179 — — —
30000 9090 7383 6538 5609 4556 4034 3700 3277 3129 3006 — — —
50000 7798 6334 5609 4812 3908 3461 3175 2811 2684 2579 — — —
100000 6334 5145 4556 3908 3175 2811 2579 2283 2180 2095 — — —
2 1/4 1.45 9290 5340 3670 5000 10492 10492 10492 9812 7970 7057 6474 5732 5473 — — — —
2 7/16 10000 10492 10492 9290 7970 6474 5732 5258 4656 4446 — — — —
2 1/2 30000 9290 7546 6682 5732 4656 4123 3782 3349 3197 — — — —
50000 7970 6474 5732 4918 3994 3537 3245 2873 2743 — — — —
100000 6474 5258 4656 3994 3245 2873 2635 2334 2228 — — — —
2 11/16 1.30 9600 5510 4260 5000 10842 10842 10842 10140 8236 7293 6690 5924 — — — — —
2 3/4 10000 10842 10842 9600 8236 6690 5924 5434 4811 — — — — —
2 15/16 30000 9600 7798 6905 5924 4811 4260 3908 3460 — — — — —
50000 8236 6690 5924 5082 4128 3655 3353 2969 — — — — —
100000 6690 5434 4811 4128 3353 2969 2723 2411 — — — — —
3 1.31 14500 8330 6340 5000 16376 16376 16376 15315 12440 11015 10104 — — — — — —
3 3/16 10000 16376 16378 14500 12440 10104 8947 8207 — — — — — —
30000 14500 11778 10429 8947 7267 6435 5903 — — — — — —
50000 12440 10104 8947 7676 6235 5521 5064 — — — — — —
100000 10104 8207 7267 6235 5064 4484 4113 — — — — — —
3 7/16 1.19 15300 8790 7410 5000 17279 17279 17279 16160 13126 11623 10662 — — — — — —
3 1/2 10000 17279 17279 15300 13126 10662 9441 8660 — — — — — —
30000 15300 12427 11004 9441 7668 6790 6228 — — — — — —
50000 13126 10104 9441 8099 6579 5825 5344 — — — — — —
100000 10662 8207 7668 6579 5344 4732 4340 — — — — — —
3 15/16 1.45 18400 10600 7270 5000 20780 20780 20780 19434 15786 13978 12822 — — — — — —
4 10000 20780 20780 18400 15786 12822 11353 10415 — — — — — —
30000 18400 14945 13234 11353 9222 8166 7490 — — — — — —
50000 15786 12822 11353 9740 7912 7005 6426 — — — — — —
100000 12822 10415 9222 7912 6426 5690 5220 — — — — — —
4 7/16 1.91 25200 14500 7550 5000 28460 28460 28460 26617 21620 19143 17561 — — — — — —
4 1/2 10000 28460 28460 25200 21620 17561 15549 14264 — — — — — —
30000 25200 20469 18124 15549 12630 11183 10259 — — — — — —
50000 21620 17561 15549 13340 10835 9594 8801 — — — — — —
100000 17561 14264 12630 10835 8801 7793 7149 — — — — — —
4 15/16 1.82 26600 15300 8390 5000 30041 30041 30041 28095 22821 20207 — — — — — — —
5 10000 30041 30041 26600 22821 18536 16413 — — — — — — —
30000 26600 21606 19131 16413 13332 11805 — — — — — — —
50000 22821 18536 16413 14081 11437 10127 — — — — — — —
100000 18536 15056 13332 11437 9290 8226 — — — — — — —
BMB-07 Roller.pmd 114 5/21/2007, 6:32 AM

the table represent loads at ideal conditions. The shaded areas indicate the maximum speed for the 970 series only. For combined load
determination, see THE BEARING SELECTION SECTION, page 268. Areas designated by “-” exceed maximum speed value.
Match Bore Size

"K" 2 ROW 1 ROW THRUST
SIZE FACTOR RATING RATING RATING* HOURS 50 100 150 250 500 750 1000 1500 1750 2000 2500 3000 3500 4000
1 3/16 1.23 2975 1710 1390 5000 3360 3360 3360 3142 2552 2260 2073 1836 1753 1684 1575 1491 1424 1368
1 1/4 10000 3360 3360 2975 2552 2073 1836 1684 1491 1424 1368 1279 1211 1156 1111
30000 2975 2416 2140 1836 1491 1320 1211 1072 1024 984 920 871 832 799
50000 2552 2073 1836 1575 1279 1133 1039 920 878 844 789 747 714 685
100000 2073 1684 1491 1279 1039 920 844 747 714 685 641 607 580 556
1 3/8 1.31 4760 2740 2080 5000 5376 5376 5376 5028 4084 3616 3317 2937 2804 2694 2520 2386 2278 —
1 7/16 10000 5376 5376 4760 4084 3317 2937 2694 2386 2278 2188 2047 1938 1850 —
30000 4760 3866 3424 2937 2386 2112 1938 1716 1638 1574 1472 1394 1331 —
50000 4084 3317 2937 2520 2047 1812 1662 1472 1406 1350 1263 1196 1142 —
100000 3317 26741 2386 2047 1662 1472 1350 1196 1142 1097 1026 971 927 —
1 1/2 1.36 6140 3530 2600 5000 6934 6934 6934 6485 5268 4664 4279 3789 3617 3475 3250 3077 — —
1 11/16 10000 6934 6934 6140 5268 4279 3789 3475 3077 2938 2823 2640 2500 — —
30000 6140 4987 4416 3789 3077 2725 2500 2213 2113 2030 1899 1798 — —
50000 5268 4279 3789 3250 2640 2338 2144 1899 1813 1742 1629 1542 — —
100000 4279 3475 3077 2640 2144 1899 1742 1542 1473 1415 1323 1253 — —
1 3/4 1.83 8070 4640 2540 5000 9114 9114 9114 8524 6923 6130 5624 4979 4754 4568 4272 — — —
1 15/16 10000 9114 9114 8070 6923 5624 4979 4568 4045 3862 3710 3470 — — —
2 30000 8070 6555 5804 4979 4045 3581 3285 2909 2777 2668 2496 — — —
50000 6923 5624 4979 4272 3470 3072 2818 2496 2383 2289 2141 — — —
100000 5624 4568 4045 3470 2818 2496 2289 2027 1935 1859 1739 — — —
2 3/16 1.65 8570 4910 2980 5000 9679 9679 9679 9052 7352 6510 5972 5288 5049 4851 4537 — — —
10000 9679 9679 8570 7352 5972 5288 4851 4295 4101 3940 3685 — — —
30000 8570 6961 6164 5288 4295 3803 3489 3089 2950 2834 2650 — — —
50000 7352 5972 5288 4537 3685 3263 2993 2650 2530 2431 2274 — — —
100000 5972 4851 4295 3685 2993 2650 2431 2153 2055 1975 1847 — — —
2 1/4 1.51 9030 5220 3470 5000 10198 10198 10198 9538 7747 6860 6293 5572 5320 5111 — — — —
2 7/16 10000 10198 10198 9030 7747 6293 5572 5111 4526 4321 4152 — — — —
2 1/2 30000 9030 7335 6495 5572 4526 4007 3676 3255 3108 2986 — — — —
50000 7747 6293 5572 4780 3883 3438 3154 2793 2666 2562 — — — —
100000 6293 5111 4526 3883 3154 2793 2562 2268 2166 2081 — — — —
2 11/16 1.30 9630 5510 4260 5000 10876 10876 10876 10171 8262 7316 6711 5942 5674 — — — — —
2 15/16 10000 10876 10876 9630 8262 6711 5942 5451 4826 4608 — — — — —
3 30000 9630 7822 6926 5942 4826 4274 3920 3471 3314 — — — — —
50000 8262 6711 5942 5098 4141 3666 3363 2978 2843 — — — — —
100000 6711 5451 4826 4141 3363 2978 2732 2419 2310 — — — — —
3 3/16 1.19 15320 8790 7410 5000 17302 17302 17302 16181 13143 11638 10676 9453 — — — — — —
3 7/16 10000 17302 17302 15320 13143 10676 9453 8671 7678 — — — — — —
3 1/2 30000 15320 12444 11018 9453 7678 6799 6273 5522 — — — — — —
50000 13143 10676 9453 8110 6587 5833 5351 4738 — — — — — —
100000 10676 8671 7678 6587 5351 4738 4346 3848 — — — — — —
3 15/16 1.23 20980 12100 9800 5000 23694 23694 23694 22159 17999 15938 14620 12945 — — — — — —
4 10000 23694 23694 20980 17999 14620 12945 11875 10515 — — — — — —
30000 20980 17041 15089 12945 10515 9311 5841 7563 — — — — — —
50000 17999 14620 12945 11106 9021 7988 7327 6488 — — — — — —
100000 14620 11875 10515 9021 7327 6488 5952 5270 — — — — — —
4 7/16 1.13 25750 14800 13100 5000 29081 29081 29081 27198 22091 19561 17944 — — — — — — —
4 1/2 10000 29081 29081 25750 22091 17944 15889 14575 — — — — — — —
30000 25750 20915 18520 15889 12906 11427 10483 — — — — — — —
50000 22091 17944 15889 13631 11072 9804 8993 — — — — — — —
100000 17944 14575 12906 11072 8993 7963 7305 — — — — — — —
4 15/16 1.27 35520 20400 16000 5000 40114 40114 40114 37517 30473 26983 24752 — — — — — — —
5 10000 40114 40114 35520 30473 24752 21917 20105 — — — — — — —
30000 35520 28851 25547 21917 17802 15763 14460 — — — — — — —
50000 30473 24752 21917 18803 15273 13524 12405 — — — — — — —
100000 24752 20105 17802 15273 12405 10985 10076 — — — — — — —
BMB-07 Roller.pmd 115 5/21/2007, 6:32 AM

PB950
Protective Cap for Easy
Grease Access
Tapered Roller
Bearings Allow for Self-Aligning
Combined Radial Replaceable
and Thrust Loads Cartridge Insert
for Quick
Changeout
Eccentric Lock
CENTRAP Labyrinth Collar
Seals
Ductile Iron
Split Housing
PB970
Elongated Bolt Contact Seals
Holes
Concentric Locking
Collars
BROWNING
950/970 TAPERED
ROLLER BEARINGS
FEATURES/BENEFITS Note: Other features are like the 950 series
BMB-07 Roller.pmd 116 5/21/2007, 6:32 AM

BROWNING
LOCKING
950 ECCENTRIC LOCK- TAPERED ROLLER
BEARINGS
Browning 950 Series roller
bearings have an eccen-
tric locking collar that
mates with the inner race
950/970 SERIES
for improved shaft hold.
One end of the inner race
is machined to a cam form
and the mating lock collar
has an off center
counterbore. The wedge
FEATURES/BENEFITS
action of the collar on the inner race secures the inner
race to the shaft. This locking method tends to tighten
and grip the shaft and not leave burrs as with setscrew
HOUSINGS
collars. NOTE: Eccentric collars are not recom-
mended for reversing applications.
Browning 950/970 Series ductile

iron split housings are
970 SETSCREW LOCK- approximately twice as strong as
This locking device has cast iron. This is an important
two rugged lock collars feature in applications such as
with two setscrews to sawmills, aggregate and steel
anchor the bearing to the where heavy loads and shock
inner race. The elastic conditions are normally
deflection of the collar experienced. Elongated bolt holes
serves to help retain the in the housing base permit easy
bearing hold to the shaft. replacement of competitive pillow
Double locking collars blocks and more adjustment
with setscrews at 120° capability. Guide pins also reduce
provide improved holding power and shaft lock, the possibility of having top and
especially in applications with vibration or unidirectional bottom mismatch when replacing
loads. Double extended inner races provide improved cartridge inserts.
shaft support – the load is distributed evenly over a wide
area. Browning lock collars are black oxide coated for
corrosion resistance.
SEALS
950 SEALS - CENTRAP
Labyrinth seals contain an
angled flinger that rotates
with the shaft, creating a
centrifugal force to help keep
out contamination. Excess
grease purges from the seal to help remove contaminants
TABLE OF CONTENTS
caught in the lubricant and prevent seal damage from
over lubrication. This non-contact labyrinth design
reduces drag, saves energy and normally cannot be
blown by over greasing.
PB950 Pillow Blocks ........ 118
FB950 Flange Blocks ....... 119
970 SEALS -The rubber C950 Cartridges ............... 120
contact face seal is designed 950 Ratings ...................... 121
to retain lubricant and help 950 Interchange Tables ... 166
exclude contaminants. The
PB970 Pillow Blocks ........ 122
seal is designed with a long FB970 Flange Blocks ....... 123
flexible face that seals axially C970 Cartridges ............... 124
against the counterface. The 970 Ratings ...................... 125
contact seal is self purging. It retains low torque 970 Interchange Tables ... 166
characteristics and rotates with the shaft to help reduce 900/E920 .......................... 102
contaminant build-up on the seal. Its low friction reduces 1000/1100 ........................ 126
heat generation and wear. 22200/22500 .................... 140
BMB-07 Roller.pmd 117 5/21/2007, 6:32 AM

Eccentric
950
PB950 Tapered Roller Bearings
Lock: Eccentric P PILLOW
Seal: CENTRAP Labyrinth B BLOCK
Temperatures: -20°F to 200°F 9 950
Self Aligning: ±1 1/2° 5 ECCENTRIC LOCK
Fitting: 1/8” NPT 0 TAPERED ROLLER BEARING
Bearing Insert: Tapered Roller
(C950 Cartridge) Dimensional Interchange
with Type K Units
Expansion and Non-Expansion
SHAFT UNIT
DIA. IN. E WT.
A B C F G H J L P R V W
MIN. MAX.
TWO BOLT BASE
1 7/16
2 3/8 5 1/32 2 3/16 6 5/16 6 11/16 8 2 1/8 1 1/32 1/2 2 7/8 11/16 1/16 - - 11.0
1 1/2
1 5/8
1 11/16 2 5/8 5 13/32 2 1/2 7 1/16 7 11/16 9 2 1/4 1 5/32 1/2 2 15/16 5/8 1/8 - - 13.5
1 3/4
1 7/8
1 15/16
2 7/8 6 1/16 3 7 7/8 8 1/2 10 2 3/8 1 9/32 5/8 3 5/32 3/4 3/32 - - 18.4
2
2 1/8
2 3/16 3 6 13/32 3 3/8 8 1/2 9 1/4 10 7/8 2 1/2 1 9/32 5/8 3 7/32 23/64 3/32 - - 21.7
2 1/4
2 7/16 3 1/4 6 25/32 3 3/8 9 3/64 10 5/16 12 2 1/2 1 13/32 5/8 3 21/64 51/64 5/64 - -
2 1/2 26.0
2 11/16
2 3/4 3 3/4 7 21/32 4 10 3/16 11 9/16 13 3/8 2 5/8 1 13/32 3/4 3 15/32 27/32 3/32 - - 33.4
2 15/16
3
3 3/4 7 15/16 4 1/4 10 11/16 12 3/64 13 7/8 3 1/8 1 13/32 3/4 3 31/32 27/32 3/32 - - 41.7
3 3/16
3 7/16
4 1/2 9 5/32 4 11/16 12 1/2 13 7/8 16 3 1/8 1 29/32 7/8 4 5/64 61/64 5/64 - - 57.0
3 1/2
FOUR BOLT BASE
3 15/16
5 10 1/32 5 1/4 13 3/16 14 13/16 16 3/4 4 1/8 2 1/32 13/16 4 29/32 1 1/32 5/32 2 3 7/8 83.5
4
4 7/16
5 3/4 11 13/32 6 1/8 14 7/16 16 5/16 18 1/4 4 3/8 2 1/4 3/4 5 1/4 1 1/8 1/16 2 1/4 4 1/8 110.0
4 1/2
4 15/16
6 1/4 12 9/32 6 5/8 16 1/8 18 1/8 20 3/8 4 7/8 2 1/2 7/8 5 15/32 1 7/32 3/32 2 1/2 4 1/4 141.0
5
Non-expansion Pillow Block Part Numbers are specified by “PB950NE” and bore size: Example, “PB950NEx2 7/16”.
Expansion Pillow Block Numbers are specified by”PB950NE” and bore size: Example, PB950Ex2 7/16”.
Bearings with eccentric locking collars are not recommended for reversing applications.
BMB-07 Roller.pmd 118 5/21/2007, 6:32 AM

Eccentric
950
Tapered Roller Bearings FB950
FLANGE F Lock: Eccentric
BLOCK B Seal: CENTRAP Labyrinth
950 9 Temperatures: -20°F to 200°F
ECCENTRIC LOCK 5 Self Aligning: ±1 1/2°
TAPERED ROLLER BEARING 0 Fitting: 1/8” NPT
Dimensional Interchange (C950 Cartridge)
with Type K Units
SHAFT Dimensions In Inches UNIT

DIA. IN. B C D E H J L M R S WT.
1 7/16
7 1/2 2 3/16 4 5/16 6 1/4 1/2 1/2 3 2 5/16 3/16 2 13/16 13.3
1 1/2
1 5/8
1 11/16 8 2 1/2 4 5/8 6 3/4 1/2 1/2 3 1/16 2 7/16 1/4 2 13/16 16.1
1 3/4
1 7/8
1 15/16
8 7/8 3 5 1/2 7 1/2 9/16 5/8 3 5/16 2 9/16 1/4 3 1/16 20.8
2
2 1/8
2 3/16 9 3/8 3 3/8 6 8 9/16 5/8 3 13/32 2 11/16 9/32 3 1/8 25.1
2 1/4
2 7/16 9 7/8 3 3/8 6 5/16 8 1/2 5/8 5/8 3 35/64 2 3/4 19/64 3 1/4 29.4
2 1/2
2 11/16
2 3/4 11 1/4 4 7 1/8 9 3/4 11/16 3/4 3 25/32 2 15/16 13/32 3 3/8 38.2
2 15/16
3
11 1/4 4 1/4 7 5/8 9 3/4 11/16 3/4 4 9/32 3 7/16 13/32 3 7/8 45.8
3 3/16
3 7/16
13 1/4 4 11/16 8 5/8 11 1/2 3/4 7/8 4 25/64 3 7/16 13/32 4 61.0
3 1/2
3 15/16
15 1/4 5 1/4 9 3/8 13 13/16 1 1/32 5 9/32 4 1/4 17/32 4 3/4 98.0
4
4 7/16
17 6 1/8 10 5/8 15 1 1 1/32 5 5/8 4 1/2 7/16 5 3/16 134.0
4 1/2
4 15/16
18 1/8 6 5/8 11 3/8 16 1 1/8 1 1/8 5 27/32 4 5/8 15/32 5 3/8 157.0
5
Non-Expansion Pillow Block Part Numbers are specified by “FB950NE” and bore size: Example, FB950NEx 2 7/16”.
Expansion Pillow Block Part Numbers are specified by “FB950E” and bore size: Example, FB950Ex 2 7/16”.
BMB-07 Roller.pmd 119 5/21/2007, 6:32 AM

Eccentric
950
C950 Tapered Roller Bearings
Lock: Eccentric C CARTRIDGE
Seal: CENTRAP Labyrinth
Temperatures: -20°F to 200°F 9 950
Self Aligning: ±1 1/2° 5 ECCENTRIC LOCK

SHAFT UNIT
DIA. IN. A B C D E L R S WT.
1 7/16
2 1/4 3/4 2 3/16 3 3/8 11/16 2 7/8 1 25/32 3 9/16 4.2
1 1/2
1 5/8
1 11/16 2 3/8 3/4 2 1/2 3 5/8 11/16 2 15/16 1 29/32 3 13/16 4.8
1 3/4
1 7/8
1 15/16
2 7/16 1 3 4 13/32 11/16 3 5/32 2 5/16 4 5/8 7.5
2
2 1/8
2 3/16 2 1/2 1 3 3/8 4 27/32 11/16 3 7/32 2 17/32 5 1/16 19.4
2 1/4
2 7/16 2 9/16 1 3 3/8 5 3/32 11/16 3 21/64 2 21/32 5 5/16 10.8
2 1/2
2 11/16
2 3/4 2 5/8 1 1/4 3 7/16 5 5/8 11/16 3 15/32 2 31/32 5 15/16 13.6
2 15/16
3
3 1/8 1 1/4 4 1/4 6 1/8 11/16 3 31/32 3 7/32 6 7/16 18.3
3 3/16
3 7/16
3 1/8 1 1/4 4 11/16 6 7/8 11/16 4 5/64 3 19/32 7 3/16 22.8
3 1/2
3 15/16
3 7/8 1 3/8 5 1/4 7 1/2 11/16 4 29/32 3 29/32 7 13/16 32.8
4
4 7/16
4 1/8 1 5/8 6 1/8 8 1/2 11/16 5 17/64 4 7/16 8 7/8 47.0
4 1/2
4 15/16
4 1/4 1 3/4 6 5/8 9 11/16 5 15/32 4 11/16 9 3/8 51.0
5
Replacement Cartridge Part Numbers are specified by “C950” and bore size: Example, C950x 2 7/16”.
Browning C950 Repkacement Cartridges Fit both Expansion and Non-Expansion Pillow Blocks and Flange Blocks.
BMB-07 Roller.pmd 120 5/21/2007, 6:32 AM

the table represent loads at ideal conditions. The shaded areas indicate the maximum speed for the 950 series only. Select 950 Series where
aligning capability is required. For combined load determination, see THE BEARING SELECTION SECTION, page 268. Areas designated by “-
” exceed maximum speed value.
Match Bore Size

"K" 2 ROW 1 ROW THRUST L10
SIZE FACTOR RATING RATING RATING* HOURS 50 100 150 250 500 750 1000 1500 1750 2000 2500 3000 3500
1 1.42 3700 2130 1500 5000 4179 4179 4179 3908 3174 2811 2578 2283 2180 2094 1959 1854 1771
10000 4179 4179 3700 3174 2578 2283 2094 1854 1771 1701 1591 1506 1438
30000 3700 3005 2611 2283 1854 1642 1506 1334 1273 1223 1144 1083 1034
50000 3174 2578 2283 1959 1591 1409 1292 1144 1093 1050 982 929 887
100000 2578 2094 1854 1591 1292 1144 1050 929 887 853 797 755 721
1 3/16 1.53 5130 2950 1930 5000 5794 5794 5794 5418 4401 3897 3575 3165 3022 2904 2716 2571 2455
1 1/4 10000 5794 5794 5130 4401 3575 3165 2904 2571 2455 2358 2206 2088 1944
1 3/8 30000 5130 4167 3690 3165 2571 2277 2088 1849 1766 1696 1586 1502 1434
50000 4401 3575 3165 2716 2206 1953 1792 1586 1515 1455 1361 1289 1230
100000 3575 2904 2571 2206 1792 1586 1455 1289 1230 1182 1106 1047 999
1 7/16 1.46 5930 3410 2330 5000 6697 6697 6697 6263 5087 4505 4132 3659 3494 3356 3139 2972 —
1 1/2 10000 6697 6697 5930 5087 4132 3659 3356 2972 2838 2726 2550 2414 —
30000 5930 4817 4265 3659 2972 2632 2414 2138 2041 1961 1834 1736 —
50000 5087 4132 3659 3139 2550 2258 2071 1834 1751 1682 1573 1490 —
100000 4132 3356 2972 2550 2071 1834 1682 1490 1422 1366 1278 1210 —
1 5/8 1.37 6050 3470 2540 5000 6833 6833 6833 6390 5190 4596 4216 3733 3564 3424 3203 — —
1 11/16 10000 6833 6833 6050 5190 4216 3733 3424 3032 2895 2781 2601 — —
1 3/4 30000 6050 4914 4351 3733 3032 2685 2463 2181 2082 2000 1871 — —
50000 5190 4216 3733 3203 2601 2303 2113 1871 1786 1716 1605 — —
100000 4216 3424 3032 2601 2113 1871 1716 1520 1451 1394 1304 — —
1 7/8 1.65 8550 4910 2980 5000 9656 9656 8656 9031 7335 6495 5958 5276 5037 4839 — — —
1 15/16 10000 9656 9656 8550 7335 5958 5276 4839 4285 4091 3931 — — —
2 30000 8550 6945 6149 5276 4285 3794 3481 3082 2943 2827 — — —
2 1/8 50000 7335 5958 5276 4526 3676 3255 2986 2644 2525 2425 — — —
100000 5958 4839 4285 3676 2986 2644 2425 2148 2051 1970 — — —
2 3/16 1.51 9090 5220 3470 5000 10266 10266 10266 9601 7798 6905 6334 5609 5355 5145 — — —
10000 10266 10266 9090 7798 6334 5609 5145 4556 4350 4179 — — —
30000 9090 7383 6538 5609 4556 4034 3700 3277 3129 3006 — — —
50000 7798 6334 5609 4812 3908 3461 3175 2811 2684 2579 — — —
100000 6334 5145 4556 3908 3175 2811 2579 2283 2180 2095 — — —
2 1/4 1.45 9290 5340 3670 5000 10492 10492 10492 9812 7970 7057 6474 5732 5473 — — — —
2 7/16 10000 10492 10492 9290 7970 6474 5732 5258 4656 4446 — — — —
2 1/2 30000 9290 7546 6682 5732 4656 4123 3782 3349 3197 — — — —
50000 7970 6474 5732 4918 3994 3537 3245 2873 2743 — — — —
100000 6474 5258 4656 3994 3245 2873 2635 2334 2228 — — — —
2 11/16 1.30 9600 5510 4260 5000 10842 10842 10842 10140 8236 7293 6690 5924 — — — — —
2 3/4 10000 10842 10842 9600 8236 6690 5924 5434 4811 — — — — —
2 15/16 30000 9600 7798 6905 5924 4811 4260 3908 3460 — — — — —
50000 8236 6690 5924 5082 4128 3655 3353 2969 — — — — —
100000 6690 5434 4811 4128 3353 2969 2723 2411 — — — — —
3 1.31 14500 8330 6340 5000 16376 16376 16376 15315 12440 11015 10104 — — — — — —
3 3/16 10000 16376 16378 14500 12440 10104 8947 8207 — — — — — —
30000 14500 11778 10429 8947 7267 6435 5903 — — — — — —
50000 12440 10104 8947 7676 6235 5521 5064 — — — — — —
100000 10104 8207 7267 6235 5064 4484 4113 — — — — — —
3 7/16 1.19 15300 8790 7410 5000 17279 17279 17279 16160 13126 11623 10662 — — — — — —
3 1/2 10000 17279 17279 15300 13126 10662 9441 8660 — — — — — —
30000 15300 12427 11004 9441 7668 6790 6228 — — — — — —
50000 13126 10104 9441 8099 6579 5825 5344 — — — — — —
100000 10662 8207 7668 6579 5344 4732 4340 — — — — — —
3 15/16 1.45 18400 10600 7270 5000 20780 20780 20780 19434 15786 13978 12822 — — — — — —
4 10000 20780 20780 18400 15786 12822 11353 10415 — — — — — —
30000 18400 14945 13234 11353 9222 8166 7490 — — — — — —
50000 15786 12822 11353 9740 7912 7005 6426 — — — — — —
100000 12822 10415 9222 7912 6426 5690 5220 — — — — — —
4 7/16 1.91 25200 14500 7550 5000 28460 28460 28460 26617 21620 19143 17561 — — — — — —
4 1/2 10000 28460 28460 25200 21620 17561 15549 14264 — — — — — —
30000 25200 20469 18124 15549 12630 11183 10259 — — — — — —
50000 21620 17561 15549 13340 10835 9594 8801 — — — — — —
100000 17561 14264 12630 10835 8801 7793 7149 — — — — — —
4 15/16 1.82 26600 15300 8390 5000 30041 30041 30041 28095 22821 20207 — — — — — — —
5 10000 30041 30041 26600 22821 18536 16413 — — — — — — —
30000 26600 21606 19131 16413 13332 11805 — — — — — — —
50000 22821 18536 16413 14081 11437 10127 — — — — — — —
100000 18536 15056 13332 11437 9290 8226 — — — — — — —
BMB-07 Roller.pmd 121 5/21/2007, 6:32 AM

Set Screw
970
PB970 Tapered Roller Bearings
Lock: Set Screw P PILLOW
Seal: Contact B BLOCK
Temperatures: - 20° to 200°F 9 970
Self Aligning: ±1 1/2° 7 SET SCREW LOCK
Bolt Holes: Elongated
Bearing Insert: Tapered Roller Dimensional Interchange
(C970 Cartridge Insert) with (DI) Units

SHAFT UNIT
DIA. IN. E WT.
A B C F G H J L V W
MIN. MAX.
TWO BOLT BASE
1 3/8
2 3/8 5 1/32 2 3/4 6 5/16 6 11/16 2 1/8 1 1/32 1/2 3 - - 11.0
1 7/16 8
1 1/2
2 5/8 5 13/32 3 3/16 7 1/16 7 11/16 2 1/4 1 5/32 1/2 3 7/16 - - 13.5
1 11/16 9
1 3/4
1 15/16 2 7/8 6 1/16 3 7/16 7 7/8 8 1/2 10 2 3/8 1 9/32 5/8 3 1/2 - - 18.4
2
2 3/16 3 6 13/32 3 3/4 8 1/2 9 1/4 10 7/8 2 1/2 1 9/32 5/8 3 3/4 - - 21.7
2 1/4
2 7/16 3 1/4 6 25/32 4 1/16 9 1/16 10 5/16 12 2 1/2 1 13/32 5/8 4 - - 25.3
2 1/2
2 11/16
2 15/16 3 3/4 7 21/32 4 23/32 10 3/16 11 9/16 13 3/8 2 5/8 1 13/32 3/4 4 33/64 - - 32.5
3
3 3/16
3 7/16 4 1/2 9 5/32 5 7/16 12 1/2 13 7/8 16 3 1/8 1 29/32 7/8 5 1/64 - - 57.0
3 1/2
FOUR BOLT BASE
2 1/4
2 7/16 3 1/4 6 13/16 4 1/16 9 1/16 10 5/16 12 3 3/8 1 15/32 1/2 4 1 3/4 2 3/4 30.0
2 1/2
2 11/16
2 15/16 3 3/4 7 11/16 4 23/32 10 3/16 11 9/16 13 1/2 3 3/4 1 31/32 5/8 4 33/64 1 7/8 3 1/8 38.0
3
3 3/16
3 7/16 4 1/2 9 3/16 5 7/16 12 1/2 13 7/8 16 4 2 7/32 3/4 5 1/64 2 3 1/2 60.0
3 1/2
3 15/16
5 10 1/32 5 15/16 13 3/16 14 13/16 16 3/4 4 1/8 2 1/32 3/4 6 1/4 2 3 7/8 84.0
4
4 7/16
5 3/4 11 13/32 6 13/32 14 7/16 16 5/16 18 1/4 4 3/8 2 1/4 3/4 6 3/4 2 1/4 4 1/8 110.0
4 1/2
4 15/16
6 1/4 12 3/4 7 13/32 16 1/8 18 1/8 20 3/8 4 7/8 2 1/2 7/8 7 1/4 2 1/2 4 1/4 141.0
5
Non-Expansion Pillow Block Part Numbers are specified by “PB970NE” and bore size:Example, PB970NEx 2 7/16”. Add “F” for Four
Bolt Base: Example, PB970FNEx 2 7/16”. Expansion Pillow Block Part Numbers are specified by “PB970E” and bore size:Example,
PB970Ex 2 7/16”. Add “F” for Four Bolt Base: Example, PB970FEx 2 7/16”
BMB-07 Roller.pmd 122 5/21/2007, 6:32 AM

Set Screw
970
Tapered Roller Bearings FB970
FLANGE F Lock: Set Screw
BLOCK B Seal: Contact
970 9 Temperatures: - 20°F to 200°F
SET SCREW LOCK 7 Self Aligning: ±1 1/2°
TAPERED ROLLER BEARING 0 Fitting: 1/8” NPT
Dimensional Interchange (C970 Cartridge Insert)
with (DI) Units
SHAFT UNIT
DIA. IN. B C D E H J L M R S WT.
1 3/8
7 1/2 2 3/4 4 5/16 6 1/4 1/2 1/2 3 2 5/16 1/4 2 3/4 14.1
1 7/16
1 1/2
8 3 3/16 4 5/8 6 3/4 1/2 1/2 3 7/16 2 7/16 25/64 3 1/32 17.0
1 11/16
1 3/4
1 15/16 8 7/8 3 7/16 5 1/2 7 1/2 9/16 5/8 3 1/2 2 9/16 3/8 3 1/8 22.2
2
2 3/16 9 3/8 3 3/4 6 8 9/16 5/8 3 3/4 2 11/16 17/32 3 7/32 26.9
2 1/4
2 7/16 9 7/8 4 1/16 6 5/16 8 1/2 5/8 5/8 4 2 3/4 31/64 3 1/2 31.4
2 1/2
2 11/16
2 15/16 11 1/4 4 23/32 7 1/8 9 3/4 11/16 3/4 4 33/64 2 15/16 5/8 3 7/8 40.6
3
3 3/16
3 7/16 13 1/4 5 7/16 8 5/8 11 1/2 3/4 7/8 5 1/64 3 7/16 5/8 4 3/8 65.3
3 1/2
3 15/16
15 1/4 5 15/16 9 3/8 13 13/16 1 6 1/4 4 1/4 13/16 5 7/16 104.2
4
4 7/16
17 6 13/32 10 5/8 15 1 1 6 3/4 4 1/2 15/16 5 53/64 142.9
4 1/2
4 15/16
18 1/8 7 13/32 11 3/8 16 1 1/8 1 1/8 7 1/4 4 5/8 1 1/8 6 1/8 166.7
5
Non-Expansion Pillow Block Part Numbers are specified by “FB970NE” and bore size: Example, FB970NEx 2 7/16”.
Expansion Pillow Block Part Numbers are specified by “FB970E” and bore size: Example, FB970Ex 2 7/16”.
BMB-07 Roller.pmd 123 5/21/2007, 6:32 AM

Set Screw
970
C970
Lock: Set Screw C CARTRIDGE
Seal: Contact
Temperatures: - 20° to 200°F 9 970

SHAFT UNIT
DIA. IN. A B C D E L R S WT.
1 3/8
2 1/8 3/4 2 3/4 3 3/8 11/16 3 1 25/32 3 9/16 5.0
1 7/16
1 1/2
2 3/8 3/4 3 3/16 3 5/8 11/16 3 7/16 1 29/32 3 13/16 5.7
1 11/16
1 3/4
1 15/16 2 1/2 1 3 7/16 4 13/32 11/16 3 1/2 2 5/16 4 5/8 8.9
2
2 3/16 2 5/8 1 3 3/4 4 27/32 11/16 3 3/4 2 17/32 5 1/16 11.3
2 1/4
2 7/16 2 7/8 1 4 1/16 5 3/32 11/16 4 2 21/32 5 5/16 12.3
2 1/2
2 11/16
2 15/16 3 1 1/4 4 23/32 5 5/8 11/16 4 33/64 2 31/32 5 15/16 14.9
3
3 3/16
3 7/16 3 5/8 1 1/4 5 7/16 6 7/8 11/16 5 1/64 3 19/32 7 3/16 27.1
3 1/2
3 15/16
4 1/2 1 3/8 5 15/16 7 1/2 11/16 6 1/4 3 29/32 7 13/16 39.0
4
4 7/16
4 5/8 1 5/8 6 13/32 8 1/2 11/16 6 3/4 4 7/16 8 7/8 55.9
4 1/2
4 15/16
5 1/8 1 3/4 7 13/32 9 11/16 11/16 7 1/4 5 3/32 10 3/16 60.7
5
Replacement Cartridge Part Numbers are specified by “C970” and bore size: Example, C970x 2 7/16”.
Browning C970 Replacement Cartridges Fit both Expansion and Non-Expansion Pillow Blocks and Flange Blocks.
BMB-07 Roller.pmd 124 5/21/2007, 6:32 AM

the table represent loads at ideal conditions. The shaded areas indicate the maximum speed for the 970 series only. For combined load
determination, see THE BEARING SELECTION SECTION, page 268. Areas designated by “-” exceed maximum speed value.
Match Bore Size

"K" 2 ROW 1 ROW THRUST
SIZE FACTOR RATING RATING RATING* HOURS 50 100 150 250 500 750 1000 1500 1750 2000 2500 3000 3500 4000
1 3/16 1.23 2975 1710 1390 5000 3360 3360 3360 3142 2552 2260 2073 1836 1753 1684 1575 1491 1424 1368
1 1/4 10000 3360 3360 2975 2552 2073 1836 1684 1491 1424 1368 1279 1211 1156 1111
30000 2975 2416 2140 1836 1491 1320 1211 1072 1024 984 920 871 832 799
50000 2552 2073 1836 1575 1279 1133 1039 920 878 844 789 747 714 685
100000 2073 1684 1491 1279 1039 920 844 747 714 685 641 607 580 556
1 3/8 1.31 4760 2740 2080 5000 5376 5376 5376 5028 4084 3616 3317 2937 2804 2694 2520 2386 2278 —
1 7/16 10000 5376 5376 4760 4084 3317 2937 2694 2386 2278 2188 2047 1938 1850 —
30000 4760 3866 3424 2937 2386 2112 1938 1716 1638 1574 1472 1394 1331 —
50000 4084 3317 2937 2520 2047 1812 1662 1472 1406 1350 1263 1196 1142 —
100000 3317 26741 2386 2047 1662 1472 1350 1196 1142 1097 1026 971 927 —
1 1/2 1.36 6140 3530 2600 5000 6934 6934 6934 6485 5268 4664 4279 3789 3617 3475 3250 3077 — —
1 11/16 10000 6934 6934 6140 5268 4279 3789 3475 3077 2938 2823 2640 2500 — —
30000 6140 4987 4416 3789 3077 2725 2500 2213 2113 2030 1899 1798 — —
50000 5268 4279 3789 3250 2640 2338 2144 1899 1813 1742 1629 1542 — —
100000 4279 3475 3077 2640 2144 1899 1742 1542 1473 1415 1323 1253 — —
1 3/4 1.83 8070 4640 2540 5000 9114 9114 9114 8524 6923 6130 5624 4979 4754 4568 4272 — — —
1 15/16 10000 9114 9114 8070 6923 5624 4979 4568 4045 3862 3710 3470 — — —
2 30000 8070 6555 5804 4979 4045 3581 3285 2909 2777 2668 2496 — — —
50000 6923 5624 4979 4272 3470 3072 2818 2496 2383 2289 2141 — — —
100000 5624 4568 4045 3470 2818 2496 2289 2027 1935 1859 1739 — — —
2 3/16 1.65 8570 4910 2980 5000 9679 9679 9679 9052 7352 6510 5972 5288 5049 4851 4537 — — —
10000 9679 9679 8570 7352 5972 5288 4851 4295 4101 3940 3685 — — —
30000 8570 6961 6164 5288 4295 3803 3489 3089 2950 2834 2650 — — —
50000 7352 5972 5288 4537 3685 3263 2993 2650 2530 2431 2274 — — —
100000 5972 4851 4295 3685 2993 2650 2431 2153 2055 1975 1847 — — —
2 1/4 1.51 9030 5220 3470 5000 10198 10198 10198 9538 7747 6860 6293 5572 5320 5111 — — — —
2 7/16 10000 10198 10198 9030 7747 6293 5572 5111 4526 4321 4152 — — — —
2 1/2 30000 9030 7335 6495 5572 4526 4007 3676 3255 3108 2986 — — — —
50000 7747 6293 5572 4780 3883 3438 3154 2793 2666 2562 — — — —
100000 6293 5111 4526 3883 3154 2793 2562 2268 2166 2081 — — — —
2 11/16 1.30 9630 5510 4260 5000 10876 10876 10876 10171 8262 7316 6711 5942 5674 — — — — —
2 15/16 10000 10876 10876 9630 8262 6711 5942 5451 4826 4608 — — — — —
3 30000 9630 7822 6926 5942 4826 4274 3920 3471 3314 — — — — —
50000 8262 6711 5942 5098 4141 3666 3363 2978 2843 — — — — —
100000 6711 5451 4826 4141 3363 2978 2732 2419 2310 — — — — —
3 3/16 1.19 15320 8790 7410 5000 17302 17302 17302 16181 13143 11638 10676 9453 — — — — — —
3 7/16 10000 17302 17302 15320 13143 10676 9453 8671 7678 — — — — — —
3 1/2 30000 15320 12444 11018 9453 7678 6799 6273 5522 — — — — — —
50000 13143 10676 9453 8110 6587 5833 5351 4738 — — — — — —
100000 10676 8671 7678 6587 5351 4738 4346 3848 — — — — — —
3 15/16 1.23 20980 12100 9800 5000 23694 23694 23694 22159 17999 15938 14620 12945 — — — — — —
4 10000 23694 23694 20980 17999 14620 12945 11875 10515 — — — — — —
30000 20980 17041 15089 12945 10515 9311 5841 7563 — — — — — —
50000 17999 14620 12945 11106 9021 7988 7327 6488 — — — — — —
100000 14620 11875 10515 9021 7327 6488 5952 5270 — — — — — —
4 7/16 1.13 25750 14800 13100 5000 29081 29081 29081 27198 22091 19561 17944 — — — — — — —
4 1/2 10000 29081 29081 25750 22091 17944 15889 14575 — — — — — — —
30000 25750 20915 18520 15889 12906 11427 10483 — — — — — — —
50000 22091 17944 15889 13631 11072 9804 8993 — — — — — — —
100000 17944 14575 12906 11072 8993 7963 7305 — — — — — — —
4 15/16 1.27 35520 20400 16000 5000 40114 40114 40114 37517 30473 26983 24752 — — — — — — —
5 10000 40114 40114 35520 30473 24752 21917 20105 — — — — — — —
30000 35520 28851 25547 21917 17802 15763 14460 — — — — — — —
50000 30473 24752 21917 18803 15273 13524 12405 — — — — — — —
100000 24752 20105 17802 15273 12405 10985 10076 — — — — — — —
BMB-07 Roller.pmd 125 5/21/2007, 6:32 AM

Contact Seal for

SPB1000 1000 & 1100 Series
To Specify Add C
Extended Inner Race Example: SPB1000NECx2 7/16”
with Concentric
Locking Collar and
Two Setscrews
Self-Aligning
Double Row Spherical
Roller Bearings
Elongated Bolt Holes

with Two and Four
Bolt Housings
One Piece MULTI-TRAP®

Cast Iron Seal
Housing
SPB1100
Ductile Iron
Housing
BROWNING
SPHERICAL ROLLER
BEARINGS
1000/1100 SERIES Note: Other features are like the 1000 Series
FEATURES/BENEFITS
BMB-07 Roller.pmd 126 5/21/2007, 6:32 AM

BROWNING
LOCKING SPHERICAL
1000/1100 LOCKING - A concentric locking
collar with two set screws anchor the bear-
ing to the inner race. The elastic deflection
ROLLER BEARINGS
of the collar serves to help retain the bearing
on the shaft. Set screws are located at 62° 1000/1100 SERIES
FEATURES/BENEFITS
for improved holding power and resistance
to back out especially in applications with
heavy vibration or unidirectional loads.
Browning lock collars are black oxide coated
for corrosion resistance.
HOUSINGS
1000 HOUSING - Browning
compact, solid, one piece, cast iron
housings provide strength and load
support in a wide variety of
applications.
SEALS CAST IRON

1000/1100 SEALING - The Browning MULTI- 1100 HOUSING - 1100 Series
TRAP® seal offers additional protection against ductile iron housings are
contaminant entry and provides for grease approximately twice as strong as
retention. The labryinth seal is constructed of cast iron. This is an important
three components with a rotating flinger to help feature in applications such as
direct contamination away from the sealing sawmills where heavy loads and
surfaces during operational or dynamic shock conditions are normally
misalignment. These self aligning, non-contact experienced.
seals reduce drag and save energy and DUCTILE
normally cannot be blown by over greasing.
Black oxide offers additional protection against
corrosion. Browning also offers a double lip
contact seal with integral metal shield help
protect against contaminants. It has good
grease retention characteristics in operating
temperatures up to 200° F. Contact seals are TABLE OF CONTENTS
standard on the 4 7/16” - 4 15/16” 1000 series
pillow blocks and optional on all other 1000 and SPB1000 Pillow Blocks ............... 128
SFB1000 Flange Blocks ............. 130
1100 series. STU1000 Take-Ups ..................... 132
T100 Take-Up Frames ................ 133
MULTI-TRAP® SFC1000 Flange Cartridges ....... 134
SPB1100 Pillow Blocks ............... 136
SFB1100 Flange Blocks ............. 137
SFC1100 Flange Units ................ 138
1100 Ratings ............................... 139
1100 Interchange Tables ............. 166
BMB-07 Roller.pmd 127 5/21/2007, 6:32 AM

Set Screw
1000
SPB1000 Spherical Roller Bearings
Lock: Set Screw S SPHERICAL ROLLER
Seal: MULTI-TRAP® Labyrinth P PILLOW
Housing: Cast Iron B BLOCK
Temperatures: -20°F to 200°F
Optional Seal: Double Lip Contact 1 1000 SERIES
Fitting: 1/8” NPT 0 CAST IRON
0 BEARING
SHAFT UNIT
DIA. IN. E WT.
A B C F G H J L* S
MIN MAX
1 1/8
1 3/16 1 3/4 3 3/4 2 15/32 4 1/2 5 6 5/16 2 3/16 1 1/16 3/8 2 27/32 2 3/4 6.5
1 1/4
1 7/16
1 7/8 3 7/8 2 15/32 4 11/16 5 5/16 6 7/8 2 3/16 1 3/16 1/2 2 27/32 2 3/4 6.9
1 1/2
1 11/16
2 1/8 4 1/4 2 23/32 5 3/16 5 13/16 2 3/16 1 5/16 1/2 2 31/32 2 7/8 8.1
1 3/4 7 3/8
1 15/16
2 1/4 4 9/16 2 29/32 5 15/16 6 9/16 8 3/8 2 3/16 1 3/8 5/8 2 31/32 2 7/8
2 9.1
2 3/16 2 1/2 5 3 1/4 6 9/16 7 1/16 8 7/8 2 7/16 1 5/8 5/8 3 7/32 3 1/8 11.8
2 7/16
2 3/4 5 11/16 4 6 13/16 7 7/16 9 1/4 2 11/16 1 3/4 5/8 3 15/32 3 3/8 16.2
2 1/2
2 11/16
2 3/4
3 1/4 6 7/16 4 3/8 7 13/16 8 7/16 10 7/16 2 13/16 2 1/4 3/4 3 25/32 3 5/8 22.1
2 15/16
3
3 3/16
3 7/16 3 3/4 7 1/2 5 1/8 9 1/4 10 3/4 13 3 3/16 2 1/4 7/8 4 3/16 4 1/32 31.6
3 1/2
3 11/16
3 15/16 4 1/8 8 7/16 6 10 11 3/4 14 1/4 3 9/16 2 1/2 1 4 3/4 4 19/32 44.6
4
*These dimensions are for Non-Expansion units. For expansion type, adjust ±.050.”
Non-Expansion Pillow Block Part Numbers are specified by “SPB1000NE” and bore size: Example, SPB1000NEx 2 7/16”. For Contact Seals Add “C” to prefix:
Example, SPB1000NECx 2 7/16”.
Expansion Pillow Block Part Numbers are specified by “SPB1000E” and bore size: Example, SPB1000Ex 2 7/16”. For Contact Seals Add “C” to prefix: Example,
SPB1000ECx 2 7/16”.
Self-aligning with contacts seals ± 1 1/4°.
BMB-07 Roller.pmd 128 5/21/2007, 6:32 AM

Set Screw
1000
Lock:
SPB1000F Set Screw
SPHERICAL ROLLER S
Seal: MULTI-TRAP® Labyrinth
PILLOW P
Housing: Cast Iron
BLOCK B
Optional Seal: Double Lip Contact
1000 SERIES 1
Self Aligning: ±1 1/2°
SET SCREW LOCK 0
Fitting: 1/8” NPT
CAST IRON 0
BEARING 0
FOUR BOLT BASE F
"DOUBLE COLLAR"
SHAFT UNIT
DIA. IN. E WT.
A B C F G H J L* M S
MIN MAX
2 7/16
2 3/4 5 11/16 4 6 7/8 7 5/8 9 1/4 3 1/4 1 3/4 1/2 3 3/4 1 3/4 3 3/8 16.5
2 1/2
2 11/16
2 3/4
3 1/4 6 7/16 4 3/8 7 7/8 8 3/8 10 7/16 3 3/4 2 1/4 5/8 4 1/4 1 7/8 3 5/8 26.0
2 15/16
3
3 3/16
3 7/16 3 3/4 7 1/2 5 1/8 9 1/4 10 3/4 13 3 7/8 2 1/4 3/4 4 17/32 2 4 1/32 37.5
3 1/2
3 11/16
3 15/16 4 1/4 8 9/16 6 11 13 15 1/4 4 1/2 2 5/8 3/4 5 7/32 2 1/4 4 19/32 50.0
4
▲ 4 7/16
4 3/4 9 3/8 6 1/8 13 1/8 13 7/8 16 5/8 4 5/8 2 3/4 3/4 5 3/8 2 1/2 6 1/8 71.0
▲ 4 1/2
▲ 4 15/16 5 1/2 10 7/8 6 7/8 15 1/8 15 7/8 18 1/2 5 1/8 3 7/8 5 7/8 2 3/4 6 5/8 100.0
*These dimensions are for Non-Expansion units. For expansion type, adjust ±.050.”
Non-Expansion Pillow Block Part Numbers are specified by “SPB1000FNE” and bore size: Example, SPB1000FNEx 2 7/16”. For Contact Seals Add “C” to prefix:
Example, SPB1000FNECx 2 7/16”.
Expansion Pillow Block Part Numbers are specified by “SPB1000FE” and bore size: Example, SPB1000FEx 2 7/16”. For Contact Seals Add “C” to prefix:
Example, SPB1000FECx 2 7/16”.
V Available with contacts seals and double locking collars only.
BMB-07 Roller.pmd 129 5/21/2007, 6:32 AM

Set Screw
1000
SFB1000 Spherical Roller Bearings
Seal: MULTI-TRAP® Labyrinth F FLANGE
Housing: Cast Iron B BLOCK
0 BEARING
SHAFT UNIT
DIA. IN. B BC C D E H J L* M P R* S WT.
1 7/16
4 5/8 5 2 15/32 3 7/8 3 35/64 3/4 1/2 2 13/16 2 1/16 3/4 1/16 2 3/4 6.8
1 1/2
1 11/16
5 5 1/2 2 23/32 4 1/2 3 57/64 3/4 1/2 3 3/64 2 1/4 3/4 11/64 2 7/8 9.8
1 3/4
1 15/16
5 3/16 5 3/4 2 29/32 4 3/4 4 5/64 3/4 1/2 3 3 /64 2 1/4 3/4 11/64 2 7/8 10.3
2
2 3/16 5 7/8 6 3/8 3 1/4 5 1/8 4 1/2 13/16 5/8 3 19/64 2 7/16 13/16 11/64 3 1/8 12.2
2 7/16
6 1/8 6 3/4 4 5 3/4 4 25/32 1 1/32 5/8 3 35/64 2 21/32 27/32 11/64 3 3/8 16.2
2 1/2
2 11/16
2 3/4
7 3/16 7 7/8 4 3/8 6 5/8 5 37/64 15/16 3/4 3 59/64 2 7/8 1 19/64 3 5/8 25.1
2 15/16
3
3 3/16
3 7/16 8 3/8 9 1/2 5 1/8 7 5/8 6 23/32 1 1/8 3/4 4 21/64 3 9/32 1 19/64 4 1/32 35.0
3 1/2
3 11/16
3 15/16 9 1/2 10 3/4 6 8 3/8 7 39/64 1 3/16 7/8 4 53/64 3 9/16 1 9/32 15/64 4 19/32 48.0
4
Non-Expansion Pillow Block Part Numbers are specified by “SFB1000NE” and bore size: Example, SFB1000NEx 2 7/16”. For Contact Seals Add “C” to prefix:
Example, SFB1000NECx 2 7/16”.
Expansion Pillow Block Part Numbers are specified by “SFB1000E” and bore size: Example, SFB1000Ex 2 7/16”. For Contact Seals Add “C” to prefix: Example,
SFB1000ECx 2 7/16”.
BMB-07 Roller.pmd 130 5/21/2007, 6:32 AM

Set Screw
1000
Spherical Roller Bearings SFB1000-3&4
SPHERICAL ROLLER S Lock: Set screw
FLANGE F Seal: MULTI-TRAP® Labyrinth
BASE B Housing: Cast Iron
1000 SERIES 1 Optional Seal: Double Lip Contact
SET SCREW LOCK 0 Self Aligning: ±1 1/2°
CAST IRON 0 Fitting: 1/4” NPT
BEARING 0
THREE OR FOUR BOLT MOUNTING 3 Load Rating Tables: Page 139
SHAFT UNIT
DIA. IN. B BC C D H J L* M P R* S WT.
1 1/8
1 3/16 5 1/4 4 1/2 2 15/32 3 15/16 25/32 3/8 2 7/8 2 1/4 5/8 1/8 2 3/4 7.3
1 1/4
1 7/16
5 1/4 5 2 15/32 3 15/16 25/32 1/2 2 7/8 2 1/4 5/8 1/8 2 3/4 6.8
1 1/2
*Dimensions L and R are for non-expansion unit. For expansion type, increase L and R by .098" max.
Non-Expansion Flange Block part numbers are SFB1000NE-3 and bore size. Example: SFB1000NE-3 x 1 1/8. For contact seal add “C” to prefix:
Example: SFB1000NE3C x 1 1/8”.
Expansion Flange Block part numbers are SFB1000E-3 and bore size. Example: SFB1000E-3 x 1 1/8. For contact seal add “C” to prefix:
Example: SFB1000E3C x 1 1/8”.
SHAFT UNIT Dimensions in Inches UNIT

DIA. IN DESCRIPTION WT.
A B C D E F G H J K L*
THREE BOLT
1 7/16 SBF1000NE3 4 1/4 3 3/4 6 1/8 2 1/4 2 3 1/4 2 3/8 5/8 1/2 1 1/4 3 6.8
1 15/16 SBF1000NE3 5 3/16 4 1/4 7 5/16 2 3/8 2 3/4 4 2 15/16 11/16 1/2 1 5/8 3 11/64 8.3
FOUR BOLT
2 7/16 SBF1000NE4 6 1/4 5 11/16 9 3/32 2 21/32 3 4 7/8 3 3/4 3/4 5/8 1 3/4 3 35/64 13.5
*These dimensions are for non-expansion unit. For expansion type, adjust ±.040.
Expansion 3 Bolt Flange Block part numbers are SBF1000E3 and bore size. Example SBF1000E3 X 1 7/16.
Expansion 4 Bolt Flange Block part numbers are SBF1000E4 and bore size. Example SBF1000E4 x 2 7/16.
For Contact Seals add “C” to prefix: Example SBF1000NEC4 X 2 7/16.
BMB-07 Roller.pmd 131 5/21/2007, 6:32 AM

Set Screw
1000
STU1000 Spherical Roller Bearings
Seal: MULTI-TRAP® Labyrinth T TAKE
Housing: Cast Iron U UP
0 BEARING
SHAFT UNIT
DIA. IN. A C D E F G J K L N P S WT.
1 15/16
2 1/8 3/4 4 3/4 4 1 1/16 1 1/16 2 7/8 3 1/2 6 3/16 3 3/32 1 7/8 11/16 15.0
2
2 3/16 2 3/8 3/4 5 1/4 4 1/2 1 3/16 1 3/16 3 1/2 3 3/4 6 13/16 3 9/32 2 13/16 18.0
2 7/16
2 3/4 7/8 5 7/8 5 1/8 1 5/16 1 5/16 3 3/4 4 3/4 7 15/16 3 15/32 2 1/8 1 1/16 24.0
2 1/2
2 11/16
2 3/4
3 1 6 3/4 5 15/16 1 9/16 1 9/16 4 1/4 4 3/4 8 3/4 3 7/8 2 3/8 1 13/16 30.0
2 15/16
3
3 3/16
3 7/16 3 5/8 1 7 5/8 6 13/16 1 13/16 1 13/16 4 7/8 6 1/4 10 7/16 4 7/16 2 19/32 1 13/16 38.0
3 1/2
3 11/16
3 15/16 4 1/8 1 1/8 9 7/16 8 5/8 2 1/8 2 3/16 5 5/8 7 11 13/16 5 7/32 2 31/32 2 1/16 48.0
4
Part Numbers are specified by “STU1000NE” and bore size: Example, STU1000NEx 3 7/16”.
For Contact Seals Add “C” to prefix: Example STU1000NECx 3 7/16”.
These Take-Up Bearings are to be used with T1000 Take-Up Frames shown on page 133.
BMB-07 Roller.pmd 132 5/21/2007, 6:32 AM

Spherical Roller Bearings T1000
TAKE UP FRAME T Material: All Steel
Construction
1000 SERIES 1
0 Exclusive Design: Removable Top
0 Permits Assem-
0 bling of Take-Up
Unit on Shaft
Before Inserting in
Take-Up Frame.
Bolts
SHAFT FRAME Adjustment* Dimensions In Inches
R eq ' d
DIA. PART N o- UNIT
Actual A B BB C E G H K L M S P U V W No. SiJz e
IN NO. m. WT.
12-16.5T1000D 12 16.5 3 15/16 27 1/2 26 1/2 1 8 9/32 4 1 1/4 - 29 1/2 1 7/8 1-8NC 1 1/4 5 3/8 - 5 5/8 2 5/8 60
1 15/16
2 18-22.5T1000D 18 22.5 3 15/16 33 1/2 32 1/2 1 8 9/32 4 1 1/4 - 35 1/2 1 7/8 1-8NC 1 1/4 5 3/8 - 5 5/8 2 5/8 70
24-28.5T1000D 24 28.5 3 15/16 39 1/2 38 1/2 1 8 9/32 4 1 1/4 - 41 1/2 1 7/8 1-8NC 1 1/4 5 3/8 - 5 5/8 2 5/8 80
12-17T1000EL 12 17 4 3/16 27 1/2 - 1 8 21/32 4 1 3/8 - 29 1/2 2 1 1/8-7NC 1 5/8 4 9/16 - 5 15/16 2 5/8 65
2 3/16 18-23T1000EL 18 23 4 3/16 33 1/2 - 1 8 21/32 4 1 3/8 - 35 1/2 2 1 1/8-7NC 1 5/8 4 9/16 - 5 15/16 2 5/8 77
24-29T1000EL 24 29 4 3/16 39 1/2 - 1 8 21/32 4 1 3/8 - 41 1/2 2 1 1/8-7NC 1 5/8 4 9/16 - 5 15/16 2 5/8 86
12-17T1000EH 12 17 4 7/16 27 1/2 - 1 8 29/32 4 1 5/8 - 29 1/2 2 1 1/8-7NC 1 5/8 4 9/16 - 5 15/16 2 5/8 68
2 3/16 18-23T1000EH 18 23 4 7/16 33 1/2 - 1 8 29/32 4 1 5/8 - 35 1/2 2 1 1/8-7NC 1 5/8 4 9/16 - 5 15/16 2 5/8 80
24-29T1000EH 24 29 4 7/16 39 1/2 - 1 8 29/32 4 1 5/8 - 41 1/2 2 1 1/8-7NC 1 5/8 4 9/16 - 5 15/16 2 5/8 91
12-16.6T1000F 12 16.6 4 3/8 28 1/2 - 1 9 3/16 4 1 1/8 - 30 1/2 2 1/8 1 1/4-7NC 1 3/4 5 5/16 - 6 9/16 2 3/4 71
2 7/16 18-22.6T1000F 18 22.6 4 3/8 34 1/2 - 1 9 3/16 4 1 1/8 - 36 1/2 2 1/8 1 1/4-7NC 1 3/4 5 5/16 - 6 9/16 2 3/4 81
2 1/2 24-28.6T1000F 24 28.6 4 3/8 40 1/2 - 1 9 3/16 4 1 1/8 - 42 1/2 2 1/8 1 1/4-7NC 1 3/4 5 5/16 - 6 9/16 2 3/4 91
30-34.6T1000F 30 34.6 4 3/8 46 1/2 - 1 9 3/16 4 1 1/8 - 48 1/2 2 1/8 1 1/4-7NC 1 3/4 5 5/16 - 6 9/16 2 3/4 111
2 11/16 12-15.5T1000GL 12 15.5 4 15/16 30 1/2 - 1 10 11/16 5 31/32 1 1/2 32 1/2 2 3/8 1 1/2-6NC 1/2 6 1/2 2 8 1/2 4 5/8 105
2 3/4 18-21.5T1000GL 18 21.5 4 15/16 36 1/2 - 1 10 11/16 5 31/32 1 1/2 38 1/2 2 3/8 1 1/2-6NC 1/2 6 1/2 2 8 1/2 4 5/8 120
2 15/16 24-27.5T1000GL 24 27.5 4 15/16 42 1/2 - 1 10 11/16 5 31/32 1 1/2 44 1/2 2 3/8 1 1/2-6NC 1/2 6 1/2 2 8 1/2 4 5/8 135
3 30-33.5T1000GL 30 33.5 4 15/16 48 1/2 - 1 10 11/16 5 31/32 1 1/2 50 1/2 2 3/8 1 1/2-6NC 1/2 6 1/2 2 8 1/2 4 5/8 150
2 11/16 12-15.5T1000GH 12 15.5 5 1/8 30 1/2 - 1 10 7/8 5 1 5/32 1 1/2 32 1/2 2 3/8 1 1/2-6NC 1/2 6 1/2 2 8 1/2 4 5/8 109
2 3/4 18-21.5T1000GH 18 21.5 5 1/8 36 1/2 - 1 10 7/8 5 1 5/32 1 1/2 38 1/2 2 3/8 1 1/2-6NC 1/2 6 1/2 2 8 1/2 4 5/8 126
2 15/16 24-27.5T1000GH 24 27.5 5 1/8 42 1/2 - 1 10 7/8 5 1 5/32 1 1/2 44 1/2 2 3/8 1 1/2-6NC 1/2 6 1/2 2 8 1/2 4 5/8 141
3 30-33.5T1000GH 30 33.5 5 1/8 48 1/2 - 1 10 7/8 5 1 5/32 1 1/2 50 1/2 2 3/8 1 1/2-6NC 1/2 6 1/2 2 8 1/2 4 5/8 156
12-15.5T1000JL 12 15.5 5 7/16 32 - 1 1/8 11 5/8 5 1 1/32 1 1/2 34 1/4 2 19/32 1 3/4-5NC 1 7 5/16 2 9 3/16 4 3/4 138
3 3/16 18-21.5T1000JL 18 21.5 5 7/16 38 - 1 1/8 11 5/8 5 1 1/32 1 1/2 40 1/4 2 19/32 1 3/4-5NC 1 7 5/16 2 9 3/16 4 3/4 156
3 7/16
3 1/2 24-27.5T1000JL 24 27.5 5 7/16 44 - 1 1/8 11 5/8 5 1 1/32 1 1/2 46 1/4 2 19/32 1 3/4-5NC 1 7 5/16 2 9 3/16 4 3/4 173
30-33.5T1000JL 30 33.5 5 7/16 50 - 1 1/8 11 5/8 5 1 1/32 1 1/2 52 1/4 2 19/32 1 3/4-5NC 1 7 5/16 2 9 3/16 4 3/4 191
12-15.5T1000JH 12 15.5 5 5/8 32 - 1 1/8 11 13/16 5 1 7/32 1 1/2 34 1/4 2 19/32 1 3/4-5NC 1 7 5/16 2 9 3/16 4 3/4 145
3 3/16 18-21.5T1000JH 18 21.5 5 5/8 38 - 1 1/8 11 13/16 5 1 7/32 1 1/2 40 1/4 2 19/32 1 3/4-5NC 1 7 5/16 2 9 3/16 4 3/4 163
3 7/16
3 1/2 24-27.5T1000JH 24 27.5 5 5/8 44 - 1 1/8 11 13/16 5 1 7/32 1 1/2 46 1/4 2 19/32 1 3/4-5NC 1 7 5/16 2 9 3/16 4 3/4 179
30-33.5T1000JH 30 33.5 5 5/8 50 - 1 1/8 11 13/16 5 1 7/32 1 1/2 52 1/4 2 19/32 1 3/4-5NC 1 7 5/16 2 9 3/16 4 3/4 197
12-18T1000K 12 18 7 36 - 1 1/4 14 15/32 6 1 7/16 1 3/4 38 1/2 2 31/32 2-4 1/2NC 1 5/8 7 1/2 2 1/2 10 7/16 4 3/4 191
3 11/16
3 15/16 18-24T1000K 18 24 7 42 - 1 1/4 14 15/32 6 1 7/16 1 3/4 44 1/2 2 31/32 2-4 1/2NC 1 5/8 7 1/2 2 1/2 10 7/16 4 3/4 223
4 24-30T1000K 24 30 7 48 - 1 1/4 14 15/32 6 1 7/16 1 3/4 50 1/2 2 31/32 2-4 1/2NC 1 5/8 7 1/2 2 1/2 10 7/16 4 3/4 249
30-36T1000K 30 36 7 54 - 1 1/4 14 15/32 6 1 7/16 1 3/4 56 1/2 2 31/32 2-4 1/2NC 1 5/8 7 1/2 2 1/2 10 7/16 4 3/4 274
Part Numbers are specified by “T1000” with travel adjustment and bore size: Example, 12-16.6T1000F has 12”-16.6”
adjustment and will accommodate a STU1000x 2 7/16” bearing unit.
These Take-Up Frames are to be used with STU Take-Up Units shown on page 132.
*Nominal adjustment is that offered by competitive frames having the same length.
Browning frames give greater ACTUAL adjustment, often permitting use of shorter, more compact frames.
Browning frames with over 12” nominal adjustment have a third foot in the center for extra support.
BMB-07 Roller.pmd 133 5/21/2007, 6:32 AM

Set Screw
1000
SFC1000 Spherical Roller Bearings
Lock: Set Screw SPHERICAL ROLLER S
Seal: MULTI-TRAP® Labyrinth FLANGE F
Housing: Cast Iron CARTRIDGE C
Optional Seal: Double Lip Contact 1000 SERIES 1
Self Aligning: ±1 1/2° SET SCREW LOCK 0
Fitting: 1/4” -28NF CAST IRON 0
BEARING 0
SHAFT UNIT
DIA. IN. B C E F* G H J K L* M* S* WT.
1 7/16
5 1/4 2 15/32 4 3/8 1/4 3 5/8 15/32 3/8 - 2 3/4 1 33/64 1/16 6.6
1 1/2
1 11/16
6 1/8 2 23/32 5 1/8 19/64 4 1/4 15/32 7/16 7/8 3 1/64 1 37/64 9/64 8.2
1 3/4
1 15/16
6 3/8 2 29/32 5 3/8 21/64 4 1/2 17/32 7/16 7/8 3 1/64 1 9/16 9/64 10.4
2
2 3/16 7 1/8 3 1/4 6 9/32 5 17/32 1/2 1 3 7/32 1 3/4 3/32 14.5
2 7/16
7 5/8 4 6 1/2 11/32 5 1/2 19/32 1/2 1 3 27/64 1 13/16 3/64 16.0
2 1/2
2 11/16
2 3/4
8 3/4 4 3/8 7 1/2 13/32 6 3/8 23/32 5/8 1 1/4 3 27/32 2 7/32 22.0
2 15/16
3
3 3/16
3 7/16 10 1/4 5 1/8 8 5/8 9/32 7 3/8 27/32 3/4 1 1/4 4 9/64 2 19/64 7/64 33.0
3 1/2
3 11/16
3 15/16 10 7/8 6 9 3/8 5/16 8 1/8 31/32 3/4 1 1/2 4 3/4 2 21/32 9/64 45.0
4
*These dimensions are for Non-Expansion units. For expansion type, adjust ±.050.” REV 1
Non-Expansion Pillow Block Part Numbers are specified by “SFC1000NE” and bore size: Example, SFC1000NEx 2 7/16”. For Contact Seals Add “C” to prefix:
Example, SFC1000NECx 2 7/16”.
Expansion Pillow Block Part Numbers are specified by “SFC1000E” and bore size: Example, SFC1000Ex 2 7/16”. For Contact Seals Add “C” to prefix:
Example, SFB1000ECx 2 7/16”.
BMB-07 Roller.pmd 134 5/21/2007, 6:32 AM

Part Number
Series (900, E920, 970, 950)
PB 900 F NE X 2 7/16
Explanation
Bore Size (inches) Take-Up Frames
Expansion (E950 & 970)
12 T 900 D
NE = Non-expansion Compatible with Bore Range
E = Expansion D = Up to 2”
Pillow Block Bolts (E920) E = 2 3/16”
F = Four Bolts EL = 2 3/16”
Series EH = 2 3/16”
900 = Eccentric F = 2 1/4” to 2 1/2”
E920 = Set Screw G = 2 11/16” to 2 15/16”
950 = Eccentric Split Housing GH = 2 15/16”
970 = Set Screw Split Housing GL = 2 15/16”
H = 2 3/16”
Housing J = 3 7/16” to 3 1/2”
PB = Pillow Block JH = 3 7/16”
FB = Four Bolt Flange JL = 3 7/16”
FC = Flange Cartridge (900) K = 3 15/16” to 4”
TU = Take-Up (900 & E920)
C = Cartridge Insert (950 & 970) Series
900 = Top Angle (TU900)
1000 = Center Pull (TUE920)
Take-Up Frame
Spherical Roller Bearings Nominal Adjustment (Inches)
Series (1000, 1100)
S PB 1000 F NE C X 2 7/16”
Bore Size (inches)
Contact Seal
Expansion
NE = Non-expansion
E = Expansion
Pillow Block Bolts
F = Four Bolts
Series
1000 = Cast Iron Set Screw
1100 = Ductile Iron Set Screw Series (22500, 22200)
Housing S PB T S 22 500 X 2 7/16”

PB = Pillow Block
FB = Four Bolt Flange
FC = Flange Cartridge
TU = Take-Up
Spherical Spherical Roller
Pillow Block
Pillow Block (Bolts)
T = Two Bolts
F = Four Bolts
Housing Material
S = Cast Steel Housing
Series
222 = Cylindrical Locking
225 = Tapered Adapter
Mounting Bearing Size
Bore Size (inches)
BMB-07 Roller.pmd 135 5/21/2007, 6:32 AM

Set Screw
1100
SPB1100 Spherical Roller Bearings
Seal: MULTI-TRAP® Labyrinth P PILLOW
Housing: Ductile Iron B BLOCK
Self Aligning: ±1 1/2° 1 SET SCREW
Fitting: 1/8” NPT 0 DUCTILE IRON
Bolt Holes: Elongated 0 BEARING
Load Rating Tables: Page139

SHAFT UNIT
DIA. IN. E WT.
A B C D F G H J L* R* S
MIN MAX
1 15/16
2 1/4 4 17/32 3 4 9/16 6 7 1/8 8 7/8 2 7/16 1 5/16 5/8 3 3/32 7/32 2 7/8 11.2
2
2 3/16 2 1/2 4 31/32 3 3/8 4 15/16 6 1/2 7 7/8 9 5/8 2 1/2 1 7/16 5/8 3 1/4 1/8 3 1/8 13.4
2 7/16
2 3/4 5 5/8 3 3/8 5 1/4 6 7/8 8 5/8 10 3/8 2 53/64 1 9/16 5/8 3 35/64 11/64 3 3/8 18.6
2 1/2
2 11/16
2 3/4
3 1/8 6 1/16 4 5 7/8 7 7/8 9 5/8 11 5/8 2 5/8 1 5/8 3/4 3 11/16 1/16 3 5/8 19.9
2 15/16
3
3 3/16
3 7/16 3 3/4 7 3/8 4 11/16 7 1/4 9 3/8 11 1/4 13 1/2 3 1/8 1 7/8 7/8 4 5/32 1/8 4 1/32 34.1
3 1/2
3 11/16
3 15/16 4 1/8 8 1/2 6 8 1/8 10 11 3/4 14 1/4 3 9/16 2 1/4 1 4 23/32 1/8 4 19/32 50
4
Non-Expansion Pillow Block part numbers are SPB1100NE and bore size. Example: SPB1100NE x 2 7/16.
Expansion Pillow Block part numbers are SPB1100E and bore size. Example: SPB1100E x 2 7/16.
BMB-07 Roller.pmd 136 5/21/2007, 6:32 AM

Set Screw
1100
Spherical Roller Bearings SFB1100
SPHERICAL ROLLER S Lock: Set Screw
FLANGE F Seal: MULTI-TRAP® Labyrinth
BLOCK B Housing: Ductile Iron
1100 1 Optional Seal: Double Lip Contact
SET SCREW 1 Self Aligning: ±1 1/2°
DUCTILE IRON 0 Fitting: 1/8” NPT
BEARING 0
SHAFT UNIT
DIA. IN. B BC C D E H J L* M R* S WT.
1 15/16
5 1/2 6 3/16 3 4 15/16 4 3/8 7/8 1/2 3 11/64 2 9/16 5/16 2 7/8 10.2
2
2 3/16 6 3/16 6 57/64 3 3/8 5 7/16 4 7/8 1 5/8 3 11/32 2 5/8 1/4 3 1/8 12.3
2 7/16
6 3/4 7 39/64 3 3/8 6 1/16 5 3/8 1 5/8 3 31/64 2 11/16 5/32 3 3/8 14.8
2 1/2
2 11/16
2 3/4
7 5/8 8 31/64 4 6 13/16 6 1 1/16 3/4 3 23/32 2 3/4 7/64 3 5/8 18.7
2 15/16
3
3 3/16
3 7/16 8 5/8 9 57/64 4 11/16 7 15/16 7 1 5/16 3/4 4 1/4 3 5/16 1/4 4 1/32 33.1
3 1/2
3 11/16
3 15/16 9 1/2 10 3/4 6 8 29/32 7 19/32 1 1/4 7/8 5 3 11/16 27/64 4 19/32 48
4
Non-Expansion Flange Block part numbers are SFB1100NE and bore size. Example: SFB1100NE x 3 7/16.
Expansion Flange Block part numbers are SFB1100E and bore size. Example: SFB1100E x 3 7/16.
BMB-07 Roller.pmd 137 5/21/2007, 6:32 AM

Set Screw
1100
SFC1100 Spherical Roller Bearings
Seal: MULTI-TRAP® Labyrinth F FLANGE
Housing: Ductile Iron C CARTRIDGE
Temperatures: - 20°F to 200°F 1 1100
Optional Seal: Double Lip Contact 1 SET SCREW
Self Aligning: ±1 1/2° 0 DUCTILE IRON
Fitting: 1/8” NPT 0 BEARING

SHAFT UNIT
DIA. IN. B C D E F G H J L* M* S WT.
1 15/16
6 3/8 2 29/32 4 1/2 5 3/8 1 1/16 4 1/2 1//2 3/8 3 3/32 1 3/8 2 7/8 10.0
2
2 3/16 7 1/8 3 1/4 4 7/8 6 1 1/8 5 1/2 1/2 3 1/4 1 3/8 3 1/8 14.0
2 7/16
7 5/8 4 5 3/8 6 1/2 1 1/8 5 1/2 9/16 1/2 3 13/32 1 7/16 3 3/8 15.5
2 1/2
2 11/16
2 3/4
8 3/4 4 3/8 6 1/4 7 1/2 1 1/4 6 3/8 11/16 5/8 3 11/16 1 5/16 3 5/8 21.6
2 15/16
3
3 3/16
3 7/16 10 1/4 5 1/8 7 1/8 8 5/8 1 5/16 7 3/8 7/8 3/4 4 1/8 1 13/16 4 1/32 40.0
3 1/2
3 11/16
3 15/16 10 7/8 6 7 3/4 9 3/8 2 1/16 8 1/8 27/32 3/4 4 3/4 1 7/16 4 19/32 47
4
Part numbers are specified by “SFC1100E x 1 15/16” or “SFC1100NE x 1 15/16”.

*Dimensions L and M are for non-expansion unit. For expansion type, increase L and M by .098" max.
BMB-07 Roller.pmd 138 5/21/2007, 6:32 AM

Spherical Roller Bearings 1000 and 1100 Series
This chart displays the Browning 1000 and 1100 Series Spherical Roller Bearing’s load capacity for a given L10 life, speed and shaft size. Values
in the table represent loads at ideal conditions. The shaded areas indicate the maximum speed for the MULTI-TRAP® Seal. The maximum speed
for the Contact Seal is indicated in the non-shaded areas. For combined load determination, see THE BEARING SELECTION SECTION, page
269. Areas designated by “-” exceed maximum speed value.
Match Bore Size

L10 REVOLUTIONS PER MINUTE
Size Rating Hours 50 100 150 250 500 750 1000 1500 1750 2000 2500 3000 3500
1 1/8 16600 5000 4880 4880 4880 4546 3692 3269 2999 2656 2535 2436 2278 2157 2059
1 3/16 10000 4880 4860 4304 3692 2999 2656 2436 2157 2059 1979 1850 1752 1673
1 1/4 30000 4304 3496 3095 2656 2157 1910 1752 1551 1481 1423 1331 1260 1203
1 7/16 50000 3692 2999 2656 2278 1850 1639 1503 1331 1271 1221 1142 1081 1032
1 1/2 100000 2999 2436 2157 1850 1503 1331 1221 1081 1032 992 927 878 838
1 11/16 17300 5000 2999 6458 5522 4737 3848 3407 3125 2767 2642 2539 2374 2248 2146
1 3/4 10000 6458 5065 4485 3848 3125 2767 2539 2248 2146 2062 1929 1826 1743
30000 6458 3643 3226 2767 2248 1990 1826 1617 1544 1483 1387 1313 1254
50000 4485 3125 2767 2374 1929 1708 1566 1387 1324 1272 1190 1127 1076
100000 3848 2539 2248 1929 1566 1387 1272 1127 1076 1033 967 915 874
1 15/16 19000 5000 3125 6925 6064 5203 4226 3742 3433 3039 2902 2788 2608 2469 2357
2 10000 6925 5563 4926 4226 3433 3039 2788 2469 2357 2265 2118 2005 1915
30000 6925 4001 3543 3039 2469 2186 2005 1776 1695 1629 1523 1442 1377
50000 4926 3433 3039 2608 2118 1875 1720 1523 1454 1397 1307 1237 1181
100000 4226 2788 2469 2118 1720 1523 1397 1237 1181 1135 1062 1005 960
2 3/16 22400 5000 3433 7150 7150 6134 4982 4412 4047 3583 3421 3287 3074 2911 2779
10000 7150 6559 5807 4982 4047 3583 3287 2911 2779 2670 2497 2364 2257
30000 7150 4717 4177 3583 2911 2577 2364 2093 1999 1920 1796 1700 1623
50000 5807 4047 3583 3074 2497 2211 2028 1796 1715 1647 1541 1459 1393
100000 4982 3287 2911 2497 2028 1796 1647 1459 1393 1338 1251 1185 1131
2 7/16 33300 5000 4047 10629 10629 9119 7407 6558 6016 5327 5086 4887 4570 4327 —
2 1/2 10000 10629 9750 8633 7407 6016 5327 4887 4327 4131 3969 3712 3515 —
30000 10629 7012 6209 5327 4327 3831 3515 3112 2971 2855 2670 2528 —
50000 8633 6016 5327 4570 3712 3287 3015 2670 2549 2449 2290 2169 —
100000 7407 4887 4327 3712 3015 2670 2449 2169 2071 1989 1860 1761 —
2 11/16 35500 5000 6016 11331 11331 9721 7896 6992 6413 5679 5422 5209 4872 4613 —
2 3/4 10000 11331 10394 9204 7896 6413 5679 5209 4613 4404 4231 3957 3747 —
2 15/16 30000 11331 7476 6619 5679 4613 4084 3747 3318 3168 3043 2846 2695 —
3 50000 9204 6413 5679 4872 3957 3504 3214 2846 2718 2611 2442 2312 —
100000 7896 5209 4613 3957 3214 2846 2611 2312 2207 2121 1983 1878 —
3 3/16 56900 5000 6413 20827 18161 15581 12656 11206 10280 9102 8691 8350 — — —
3 7/16 10000 20827 16660 14752 12656 10280 9102 8350 7393 7059 6782 — — —
3 1/2 30000 20827 11982 10610 9102 7393 6547 6005 5317 5077 4878 — — —
50000 14752 10280 9102 7809 6343 5616 5152 4562 4356 4185 — — —
100000 12656 8350 7393 6343 5152 4562 4185 3705 3538 3399 — — —
3 11/16 69900 5000 10280 25854 22311 19141 15547 13767 12628 11182 10677 10257 — — —
3 15/16 10000 25854 20466 18122 15547 12628 11182 10257 9083 8672 8332 — — —
4 30000 25854 14720 13034 11182 9083 8042 7377 6532 6237 5992 — — —
50000 18122 12628 11182 9593 7792 6900 6329 5604 5351 5141 — — —
100000 15547 10257 9083 7792 6329 5604 5141 4552 4346 4176 — — —
4 7/16 91700 5000 12628 33386 29269 25110 20396 18060 16567 — — — — — —
4 1/2 10000 33386 26849 23774 20396 16567 14669 13456 — — — — — —
30000 33386 19310 17099 14669 11915 10550 9678 — — — — — —
50000 23774 16567 14669 12585 10222 9051 8303 — — — — — —
100000 20396 13456 11915 10222 8303 7352 6744 — — — — — —
4 15/16 123,000 5000 16567 45244 39259 33681 27358 24224 — — — — — — —
10000 45244 36013 31889 27358 22221 19676 — — — — — — —
30000 45244 25902 22935 19676 15982 14152 — — — — — — —
50000 31889 22221 19676 16881 13711 12141 — — — — — — —
100000 27358 18049 15982 13711 11137 9862 — — — — — — —
BMB-07 Roller.pmd 139 5/21/2007, 6:32 AM

SPBT22500
Removable Housing
Self-Aligning Double Cap Facilitates
Row Spherical Roller Bearing Mounting,
Bearings Inspection and
Maintenance
Dowelled Cap and
Tapered Adapter
Base for Assembly
Mounting Includes
Accuracy
Sleeve, Nut and
Washer
Elongated Bolt Holes

for Two and Four Triple Labyrinth
Bolt Mounting Seals
Industry Interchangeability
SPBF22200
BROWNING Cylindrical
Mounting -
22500/22200
Note Stepped
and Threaded
Shaft with
SPHERICAL
Locknut and
Washer
ROLLER BEARINGS
FEATURES/BENEFITS Note: Other features are like the 22500 series
BMB-07 Roller.pmd 140 5/21/2007, 6:32 AM

BROWNING
LOCKING 22500/22200
SPHERICAL
22500 LOCKING
The Browning 22500 series
utilizes a tapered adapter
system to fasten the bear-
ROLLER BEARINGS
ing to the shaft. The SNW
adapter assembly system
consists of a sleeve, lock-
nut and lockwasher that is
FEATURES/BENEFITS
available from Browning for
shaft mounting of tapered
bore 22200CKW33C3
spherical roller bearings.
This method provides posi-
tive shaft lock and conforms
to a wide range of shaft tol-
HOUSING
erances, and maintains
concentricity of shaft to
bearing bore. The adapter
sleeve system does not
mar the shaft and reduces 22500/22200 HOUSINGS
fretting corrosion.
Browning 22500 and 22200
series housings are available in
cast iron or steel. The 22500
steel and 22200 series pillow
22200 LOCKING blocks are not stocked. These
The Browning 22200 cylin- housing styles are provided with
drical bore variation re-
quires a press or shrink fit a universal sump configuration
on the shaft. This system suitable for grease, oil bath or
requires the user to provide
a precise stepped shaft and circulating oil lubrication. Slotted
machined threads for instal- bolt holes in the housing base
lation of 22200CW33C3
spherical roller bearing in- enable positioning and alignment
serts. during installation. A stabilizing
ring is furnished with each
housing and must be removed for
expansion.
GENERAL
SEALING This heavy duty line of pillow blocks is designed for typical SAF
dimensional interchangeably and generally used in applications where
heavier loads are encountered and grease or oil lubrication is desirable.
22500/22200 SEALING Common applications are found on conveyors in the pulp and paper,
Browning 22500/22200 se- mining, aggregate, bulk material handling and steel industries.
ries are available with stan-
dard triple labyrinth seals
that are manufactured in
TABLE OF CONTENTS
aluminum. These (LER)
type seals are designed
with two grooves that mate
with the machined grooves
in the housing, forming a SPBT22500 Pillow Blocks ... 142
labyrinth to help keep out SPBF22500 Pillow Blocks ... 143
contamination. This close
clearance seal provides SPBTS22500 Pillow Blocks 144
energy efficient operation SPBFS22500 Pillow Blocks 144
and lubricant retention SPBT22200 Pillow Blocks ... 145
characteristics.
SPBF22200 Pillow Blocks ... 145
SPBTS22200 Pillow Blocks 146
SPBFS22200 Pillow Blocks 146
Bearings & Accessories ....... 147
BMB-07 Roller.pmd 141 5/21/2007, 6:32 AM

Adapter
22500
22500 Series
Cast Iron Pillow Blocks
Lock: Adapter Mount S SPHERICAL ROLLER
Seal: Triple Labyrinth P PILLOW
Housing: Two Bolt Base B BLOCK
Temperatures: -20°F to 200° F T TWO BOLT BASE
Self Aligning: See Page 276
Fitting: 1/4NPT for housings 515-528 2 22500
and 216-228 2 BEARING SERIES
3/8NPT for housings 530 and 5 ADAPTER MOUNT
above, and 230 and above 0 BEARING
Bearing Insert: 22200 CKW33C3 0 SIZE
Accessories: Page 147
Ratings: Page 155
Expansion and Non-Expansion L

N
Non-Expansion
Expansion
A
H K
E MIN. Static Oil G

Level
E MAX
F TWO BASE BOLTS
PART NUMBERS DIMENSIONS IN INCHES

COMPONENTS E
SHAFT (1) Complete Wt.
Pillow Block Stabilizing A B F G H K L M N No. Size
SIZE Housing Seal Rings Ring MIN. MAX. L b s.
(2 Req'd.) ( 1 Req'd.)
TWO BASE BOLT TYPE
2 7/16 SPBT22515 X 2 7/16 ST515 SR-207 SR-15 3 1/4 6 3/8 8 5/8 9 5/8 11 1/4 3 1/8 1 1/8 1 1/4 4 3/4 - 1/16 2 5/8 30
2 1/2 SPBT22515 X 2 1/2 ST515 SR208 SR-15 3 1/4 6 9/16 8 5/8 9 5/8 11 1/4 3 1/8 1 1/4 1 1/4 4 3/4 - 1/16 2 5/8 31
2 11/16 SPBT22516 X 2 11/16 ST516 SR-211 SR-16 3 1/2 6 7/8 9 5/8 11 13 3 1/2 1 3/16 1 3/8 4 7/8 - 3/16 2 3/4 37
2 3/4 SPBT22516 X 2 3/4 ST516 SR-212 SR-16 3 1/2 7 1/16 9 5/8 11 13 3 1/2 1 3/8 1 3/8 5 3/8 - 3/16 2 3/4 43
2 15/16 SPBT22517 X 2 15/16 ST517 SR-215 SR-17 3 3/4 7 1/4 9 7/8 11 13 3 1/2 1 1/4 1 1/2 4 15/16 - 3/16 2 3/4 40
3 SPBT22517 X 3 ST517 SR-300 SR-17 3 3/4 7 1/2 9 7/8 11 13 3 1/2 1 7/16 1 1/2 5 3/8 - 3/16 2 3/4 48
3 3/16 SPBT22518 X 3 3/16 ST518 SR-303 SR-18 4 7 3/4 10 3/8 11 5/8 13 3/4 3 7/8 1 1/2 1 5/8 6 1/4 - 3/16 2 3/4 49
3 7/16 SPBT22520 X 3 7/16 ST520 SR-307 SR-20 4 1/2 8 11/16 11 5/8 13 1/8 15 1/4 4 3/8 1 3/4 1 3/4 6 - 3/16 2 7/8 65
3 1/2 SPBT22520 X 3 1/2 ST520 SR-308 SR-20 4 1/2 9 11 5/8 13 1/8 15 1/4 4 3/8 1 3/4 1 3/4 6 1/4 - 3/16 2 7/8 76
(1) This part number includes all components (housing, bearing, seal rings, stabilizing ring, adapter assembly, locknut and
lockwasher) which are required to assemble a complete pillow block. Components are packaged separately.
Refer to pages 147-148 for bearing and adapter assemblies.
A stabilizing ring is furnished with each housing. DO NOT use for expansion bearing. NOTE: Only one non-expansion bearing should be used
on a shaft; all others on the same shaft MUST be expansion type.
Non-expansion (fixed bearing is offset by “N” amount in relation to center line of housing.
BMB-07 Roller.pmd 142 5/21/2007, 6:32 AM

Adapter
22500
22500 Series
SPHERICAL ROLLER S Cast Iron Pillow Blocks
PILLOW P Lock: Adapter Mount
BLOCK B Seal: Triple Labyrinth
FOUR BOLT BASE F Housing: Four Bolt Base
Temperatures: -20°F to 200° F
22500 2 Self Aligning: See Page 276
BEARING SERIES 2 Fitting: 1/4NPT for housings 515-528
ADAPTER MOUNT 5 and 216-228
BEARING 0 3/8NPT for housings 530 and
SIZE 0 above, and 230 and above
Bearing Insert: 22200 CKW33C3

Ratings: Page 155
B
A
H K
M
E MIN. Static Oil G
Level
E MAX.
F FOUR BASE BOLTS
COMPONENTS E
(1) Complete
SHAFT Wt.
SIZE Pillow Block* Stabilizing A B F G H K L M N No. Size L b s.
Housing (2eaRl eRqi'ndg.)s
S
Ring MIN. MAX.
( 1 Req'd.)
FOUR BASE BOLT TYPE
2 7/16 SPBF22515 X 2 7/16 S F 515 SR-207 SR-15 3 1/4 6 3/8 8 5/8 9 5/8 11 1/4 3 1/8 1 1/8 1 1/4 4 3/4 1 7/8 1/16 4 1/2 30
2 1/2 SPBF22515 X 2 1/2 S F 515 SR-208 SR-15 3 1/4 6 9/16 8 5/8 9 5/8 11 1/4 3 1/8 1 1/8 1 1/4 4 3/4 1 7/8 1/16 4 1/2 31
2 11/16 SPBF22516 X 2 11/16 S F 516 SR-211 SR-16 3 1/2 6 7/8 9 5/8 11 13 3 1/2 1 3/16 1 3/8 4 7/8 2 1/8 3/16 4 5/8 37
2 3/4 SPBF22516 X 2 3/4 S F 516 SR-212 SR-16 3 1/2 7 1/16 9 5/8 11 13 3 1/2 1 3/16 1 3/8 5 3/8 2 1/8 3/16 4 5/8 43
2 15/16 SPBF22517 X 2 15/16 S F 517 SR-215 SR-17 3 3/4 7 1/4 9 7/8 11 13 3 1/2 1 1/4 1 7/16 4 15/16 2 1/8 3/16 4 5/8 40
3 S P B F 22517 X 3 S F 517 SR-300 SR-17 3 3/4 7 1/2 9 7/8 11 13 3 1/2 1 1/4 1 1/2 5 3/8 2 1/8 3/16 4 5/8 48
3 3/16 SPBF22518 X 3 3/16 S F 518 SR-303 SR-18 4 7 3/4 10 3/8 11 5/8 13 3/4 3 7/8 1 1/2 1 5/8 6 1/4 2 1/8 3/16 4 5/8 49
3 7/16 SPBF22520 X 3 7/16 S F 520 SR-307 SR-20 4 1/2 8 11/16 11 5/8 13 1/8 15 1/4 4 3/8 1 11/16 1 3/4 6 2 3/8 3/16 4 3/4 65
3 1/2 SPBF22520 X 3 1/2 S F 520 SR-308 SR-20 4 1/2 9 11 5/8 13 1/8 15 1/4 4 3/8 1 11/16 1 3/4 6 1/4 2 3/8 3/16 4 3/4 76
3 11/16 SPBF22522 X 3 11/16 S F 522 SR-311 SR-22 4 15/16 9 7/8 12 5/8 14 1/2 16 1/2 4 3/4 2 2 6 1/2 2 3/4 3/16 4 3/4 95
3 15/16 SPBF22522 X 3 15/16 S F 522 SR-315 SR-22 4 15/16 9 9/16 12 5/8 14 1/2 16 1/2 4 3/4 2 2 6 3/8 2 3/4 3/16 4 3/4 81
4 S P B F 22522 X 4 S F 522 SR-400 SR-22 4 15/16 9 7/8 12 5/8 14 1/2 16 1/2 4 3/4 2 2 6 1/2 2 3/4 3/16 4 3/4 95
4 3/16 SPBF22524 X 4 3/16 S F 524 SR-403 SR-24 5 1/4 10 1/4 13 1/4 14 1/2 16 1/2 4 3/4 2 1/8 2 7 3/8 2 3/4 3/16 4 3/4 94
4 7/16 SPBF22526 X 4 7/16 S F 526 SR-407 SR-26 6 11 9/16 14 5/8 16 18 3/8 5 1/8 2 3/8 2 1/2 8 3 1/4 3/16 4 7/8 137
4 1/2 SPBF22526 X 4 1/2 S F 526 SR-408 SR-26 6 11 3/4 14 5/8 16 18 3/8 5 1/8 2 3/8 2 1/2 8 3 1/4 3/16 4 7/8 160
4 15/16 SPBF22528 X 4 15/16 S F 528 SR-415 SR-28 6 11 3/4 16 17 1/8 20 1/8 5 7/8 2 3/8 2 1/4 7 3/4 3 3/8 3/16 4 1 159
5 S P B F 22528 X 5 S F 528 SR-500 SR-28 6 12 16 17 1/8 20 1/8 5 7/8 2 3/8 2 1/4 7 1/2 3 3/8 3/16 4 1 170
5 3/16 SPBF22530 X 5 3/16 S F 530 SR-503 SR-30 6 5/16 12 1/2 17 18 1/4 21 1/4 6 1/4 2 1/2 2 1/2 8 3/8 3 3/4 3/16 4 1 189
5 7/16 SPBF22532 X 5 7/16 S F 532 SR-507 SR-32 6 11/16 13 5/16 17 3/8 19 1/4 22 6 1/4 2 5/8 1 7/8 8 3/4 3 3/4 3/16 4 1 225
5 1/2 SPBF22532 X 5 1/2 S F 532 SR-508 SR-32 6 11/16 13 5/8 17 3/8 19 1/4 22 6 1/4 2 5/8 1 7/8 8 3/4 3 3/4 3/16 4 1 225
5 15/16 SPBF22534 X 5 15/16 S F 534 SR-515 SR-34 7 1/16 14 9/16 19 3/8 21 5/8 24 3/4 6 3/4 2 3/4 2 9 3/8 4 1/4 3/16 4 1 300
6 S P B F 22534 X 6 S F 534 SR-600 SR-34 7 1/16 14 1/2 19 3/8 21 5/8 24 3/4 6 3/4 2 3/4 2 9 5/8 4 1/4 3/16 4 1 300
6 7/16 SPBF22536 X 6 7/16 S F 536 SR-607 SR-36 7 1/2 15 1/2 20 7/8 23 5/8 26 3/4 7 1/8 3 2 3/8 9 11/16 4 5/8 3/16 4 1 330
6 1/2 SPBF22536 X 6 1/2 S F 536 SR-608 SR-36 7 1/2 15 1/4 20 7/8 23 5/8 26 3/4 7 1/8 3 2 3/8 10 4 5/8 3/16 4 1 355
6 15/16 SPBF22538 X 6 15/16 S F 538 SR-615 SR-38 7 7/8 15 11/16 21 5/8 24 3/8 28 7 1/2 3 1/8 2 3/8 10 3/4 4 1/2 3/16 4 1 1/4 375
7 S P B F 22538 X 7 S F 538 SR-700 SR-38 7 7/8 16 1/8 21 5/8 24 3/8 28 7 1/2 3 1/8 2 3/8 10 3/4 4 1/2 3/16 4 1 1/4 415
7 3/16 SPBF22540 X 7 3/16 S F 540 SR-703 SR-40 8 1/4 17 3/16 22 1/2 25 29 1/2 8 3 3/8 2 5/8 10 13/16 5 3/16 4 1 1/4 445
7 1/2 SPBF22544 X 7 1/2 S F 544 SR-708 SR44 9 1/2 19 3/8 24 3/4 27 7/8 32 3/4 8 3/4 3 3/4 2 1/2 12 5 1/4 3/16 4 1 1/2 685
7 15/16 SPBF22544 X 7/15 S F 544 SR-715 SR-44 9 1/2 19 5/8 24 3/4 27 7/8 32 3/4 8 3/4 3 3/4 2 1/2 11 1/2 5 1/4 3/16 4 1 1/2 615
8 S P B F 22544 X 8 S F 544 SR-800 SR-44 9 1/2 19 3/8 24 3/4 27 7/8 32 3/4 8 3/4 3 3/4 2 1/2 12 5 1/4 3/16 4 1 1/2 685
BMB-07 Roller.pmd 143 5/21/2007, 6:32 AM

Adapter
22500
22500 Series
Cast Steel Pillow Blocks
Lock: Adapter Mount S SPHERICAL ROLLER
Housing: Cast Steel B BLOCK
Temperatures: -20° to 200° F T TWO BOLT BASE
Self Aligning: See Page 276 (F FOUR BOLT BASE)
Fitting: 1/4NPT for housings 515- S CAST STEEL HOUSING
528 and 216-228
3/8NPT for housings 530 2 22500
and above, and 230 and 2 BEARING SERIES
above 5 ADAPTER MOUNT
Bearing Insert: 22200 CKW33C3 0 BEARING
Accessories: Page 147 0 SIZE
Ratings: Page 155
Expansion and
Non-Expansion
SHAFT (1) Complete E Wt.

Housing A B F G H K L M N Size
SIZE Pillow Block* MIN. MAX. L b s.
TWO BASE BOLT TYPE

2 7/16 SPBTS22515 X 2 7/16 STS515 3 1/4 6 3/8 8 5/8 9 5/8 11 1/4 3 1/8 1 1/8 1 1/4 4 3/4 - 3/16 5/8 30
2 11/16 SPBTS22516 X 2 11/16 STS516 3 1/2 6 7/8 9 5/8 11 13 3 1/2 1 3/16 1 11/16 4 7/8 - 3/16 3/4 37
2 15/16 SPBTS22517 X 2 15/16 STS517 3 3/4 7 1/4 9 7/8 11 13 3 1/2 1 1/4 1 7/16 4 15/16 - 3/16 3/4 40
3 3/16 SPBTS22518 X 3 3/16 STS518 4 7 3/4 10 3/4 11 5/8 13 3/4 3 7/8 1 1/2 1 17/32 6 1/4 - 3/16 3/4 49
3 7/16 SPBTS22520 X 3 7/16 STS520 4 1/2 8 11/16 11 5/8 13 1/8 15 1/4 4 3/8 1 3/4 1 3/4 6 - 3/16 7/8 65
FOUR BASE BOLT TYPE
2 7/16 S P B F S 22515 X 2 7/16 S F S 15 3 1/4 6 3/8 8 5/8 9 5/8 11 1/4 3 1/8 1 1/8 1 1/4 4 3/4 1 7/8 3/16 1/2 30
2 11/16 S P B F S 22516 X 2 11/16 S F S 516 3 1/2 6 7/8 9 5/8 11 13 3 1/2 1 3/16 1 11/32 4 7/8 2 1/8 3/16 5/8 37
2 15/16 S P B F S 22517 X2 15/16 S F S 517 3 3/4 7 1/4 9 7/8 11 13 3 1/2 1 1/4 1 7/16 4 15/16 2 1/8 3/16 5/8 40
3 3/16 S P B F S 22518 X 3 3/16 S F S 518 4 7 3/4 10 3/8 11 5/8 13 3/4 3 7/8 1 1/2 1 17/32 6 1/4 2 1/8 3/16 5/8 65
3 7/16 S P B F S 22520 X 3 7/16 S F S 520 4 1/2 8 11/16 11 5/8 13 1/8 15 1/4 4 3/8 1 3/4 1 3/4 6 2 3/8 3/16 3/4 65
3 15/16 S P B F S 22522 X 3 15/16 S F S 522 4 15/16 9 9/16 12 5/8 14 1/2 16 1/2 4 3/4 2 1 7/8 6 3/8 2 3/4 3/16 3/4 81
4 3/16 S P B F S 22524 X 4 3/16 S F S 524 5 1/4 10 1/4 13 1/4 14 1/2 16 1/2 4 3/4 2 1/8 1 15/16 7 3/8 2 3/4 3/16 3/4 94
4 7/16 S P B F S 22526 X 4 7/16 S F S 526 6 11 9/16 14 5/8 16 18 3/8 5 1/8 2 3/8 2 7/16 8 3 1/4 3/16 7/8 137
4 15/16 S P B F S 22528 X 4 15/16 S F S 528 6 11 3/4 16 17 1/8 20 1/8 5 7/8 2 3/8 2 1/8 7 3/4 3 3/8 3/16 1 159
5 3/16 S P B F S 22530 X 5 3/16 S F S 530 6 5/16 12 1/2 17 18 1/4 21 1/4 6 1/4 2 1/2 2 3/16 8 3/8 3 3/4 3/16 1 189
5 7/16 S P B F S 22532 X 5 7/16 S F S 532 6 11/16 13 5/16 17 3/8 19 1/4 22 6 1/4 2 5/8 2 3/16 8 3/4 3 3/4 3/16 1 225
5 15/16 S P B F S 22534 X 5 15/16 S F S 534 7 1/16 14 9/16 19 3/8 21 5/8 24 3/4 6 3/4 2 3/4 2 5/16 9 3/8 4 1/4 3/16 1 300
6 7/16 S P B F S 22536 X 6 7/16 S F S 536 7 1/2 15 1/2 20 7/8 23 5/8 26 3/4 7 1/8 3 2 9/16 9 11/16 4 5/8 3/16 1 330
6 15/16 S P B F S 22538 X 6 15/16 S F S 538 7 7/8 15 11/16 21 5/8 24 3/8 28 7 1/2 3 1/8 2 5/8 10 3/4 4 1/2 3/16 1 1/4 375
7 3/16 S P B F S 22540 X 7 3/16 S F S 540 8 1/4 17 3/16 22 1/2 25 29 1/2 8 3 3/8 2 11/16 10 13/16 5 3/16 1 1/4 445
7 15/16 S P B F S 22544 X 7/15 S F S 544 9 1/2 19 5/8 24 3/4 27 7/8 32 3/4 8 3/4 3 3/4 3 3/8 11 1/2 5 1/4 3/16 1 1/2 615
*Not available from stock - Contact Browning for delivery.

BMB-07 Roller.pmd 144 5/21/2007, 6:32 AM

Cylindrical
22200
22200 Series
Cast Iron Pillow Blocks
SPHERICAL ROLLER S Lock: Cylindrical Mount
PILLOW P Seal: Triple Labyrinth
BLOCK B Housing: Cast Iron
TWO BOLT BASE T Temperatures: -20°F to 200° F
FOUR BOLT BASE (F) Self Aligning: See Page 276
Fitting: 1/4NPT for housings
22000 2 515-528 and 216-
BEARING SERIES 2 228
CYLINDRICAL MOUNT 2 3/8NPT for housings
BEARING 0 530 and above, and
SIZE 0 230 and above
Bearing Insert: 22200 CW33C3
Ratings: Page 155
SHAFT SIZE PART NUMBERS DIMENSIONS IN INCHES

S2 S3 E
S2 S3 (1) Complete Housing S eal S eal Stabliizing Bolt Wt.
Pillow Block* A B C F G H K L M N
Rings Rings Ring Size L b s.
MIN. MAX.
TWO BASE BOLT TYPE
3 5/8 3 SPBT22216 ST216 SR-310 SR-300 SR-16 3 1/2 7 1/16 3/16 9 5/8 11 13 3 1/2 1 3/8 1 3/8 5 3/8 - 3/16 3/4 43
3 15/16 3 3/16 SPBT22217 ST217 SRN-315 SRN-303 SR-17 3 3/4 7 1/4 3/16 9 7/8 11 13 3 1/2 1 14 1 1/2 4 15/16 - 3/16 3/4 43
4 1/8 3 3/8 SPBT22218 ST218 SR-402 SR-306 SR-18 4 7 3/4 1/4 10 3/8 11 5/8 13 3/4 3 7/8 1 1/2 1 5/8 6 1/4 - 3/16 3/4 50
4 1/2 3 13/16 SPBT22220 ST220 SR-408 SR-313 SR-20 4 1/2 8 11/16 1/4 11 5/8 13 1/8 15 1/4 4 3/8 1 3/4 1 3/4 6 - 3/16 7/8 71
FOUR BASE BOLT TYPE
3 5/8 3 S P B F 22216 SF216 SR-310 SR-300 SR-16 3 12 7 1/16 3/16 9 5/8 11 13 3 1/2 1 3/8 1 3/8 5 3/8 2 1/8 3/16 5/8 43
3 15/16 3 3/16 S P B F 22217 SF217 SRN-315 SRN-303 SR-17 3 3/4 7 1/4 3/16 9 7/8 11 13 3 1/2 1 1/4 1 1/2 4 15/16 2 1/8 3/16 5/8 43
4 1/8 3 3/8 S P B F 22218 SF218 SR-402 SR-306 SR-18 4 7 3/4 1/4 10 3/8 11 5/8 13 3/4 3 7/8 1 1/2 1 5/8 6 1/4 2 1/8 3/16 5/8 50
4 1/2 3 13/16 S P B F 22220 SF220 SR-408 SR-313 SR-20 4 1/2 8 11/16 1/4 11 5/8 13 1/8 15 1/4 4 3/8 1 3/4 1 3/4 6 2 3/8 3/16 3/4 71
4 7/8 4 3/16 S P B F 22222 SF222 SR-414 SR-403 SR-22 4 15/16 9 9/16 1/4 12 5/8 14 1/2 16 1/2 4 3/4 2 2 6 3/8 2 3/4 3/16 3/4 81
5 5/16 4 9/16 S P B F 22224 SF224 SR-505 SR-409 SR-24 5 1/4 10 1/4 1/4 13 1/4 14 1/2 16 1/2 4 3/4 2 1/8 2 7 3/8 2 3/4 3/16 3/4 90
5 7/8 4 15/16 S P B F 22226 SF226 SR-514 SR-415 SR-26 6 11 9/16 1/4 14 5/8 16 18 3/8 5 1/8 2 3/8 2 1/2 8 3 1/4 3/16 7/8 127
6 1/4 5 5/16 S P B F 22228 SF228 SR-604 SR-505 SR-28 6 11 3/4 1/4 16 17 1/8 20 1/8 5 7/8 2 3/8 2 1/4 7 3/4 3 3/8 3/16 1 149
6 5/8 5 3/4 S P B F 22230 SF230 SR-610 SR-512 SR-30 6 5/16 12 1/2 1/4 17 18 1/4 21 1/4 6 1/4 2 1/2 2 1/2 8 3/8 3 3/4 3/16 1 175
7 6 1/16 S P B F 22232 SF232 SR-700 SR-601 SR-32 6 11/16 13 5/16 1/4 17 3/8 19 1/4 22 6 1/4 2 5/8 1 7/8 8 3/4 3 3/4 3/16 1 210
7 7/16 6 7/16 S P B F 22234 SF234 SR-707 SR-607 SR-34 7 1/16 14 9/16 1/4 19 3/8 21 5/8 24 3/4 6 3/4 2 3/4 2 9 3/8 4 1/4 3/16 1 280
7 13/16 6 7/8 S P B F 22236 SF236 SR-713 SR-614 SR-36 7 1/2 15 1/2 3/8 20 7/8 23 5/8 26 3/4 7 1/8 3 2 3/8 9 11/16 4 5/8 3/16 1 305
8 3/8 7 1/4 S P B F 22238 SF238 SR-806 SR-704 SR-38 7 7/8 15 11/16 3/8 21 5/8 24 3/8 28 7 1/2 3 1/8 2 3/8 10 3/4 4 1/2 3/16 1 1/4 350
8 3/4 7 5/8 S P B F 22240 SF240 SR-812 SR-710 SR-40 8 1/4 17 3/16 3/8 22 1/2 25 29 1/2 8 3 3/8 2 5/8 10 13/16 5 3/16 1 1/4 420
9 9/16 8 5/16 S P B F 22244 SF244 SR-909 SR-805 SR-44 9 1/2 19 5/8 3/8 24 3/4 27 7/8 32 3/4 8 3/4 3 3/4 2 1/2 11 1/2 5 1/4 3/16 1 1/2 590

BMB-07 Roller.pmd 145 5/21/2007, 6:32 AM

Cylindrical
22200
22200 Series
Cast Steel Pillow Blocks
Lock: Cylindrical Mount S SPHERICAL ROLLER
Housing: Cast Steel B BLOCK
Temperatures: - 20°F to 200° F T TWO BOLT BASE
Self Aligning: See Page 276 (F) FOUR BOLT BASE
Fitting: 1/4NPT for housings 515- S CAST STEEL HOUSING
528 and 216-228
3/8NPT for housings 530 2 22200
and above, and 230 and 2 BEARING SERIES
above 2 CYLINDRICAL MOUNT
Bearing Insert: 22200 CW33C3 0 BEARING
Accessories: Page 149 0 SIZE
Ratings: Page 155
Expansion and
Non-Expansion
SHAFT SIZE DIMENSIONS IN INCHES

Housing E
S2 S3 (1) Complete only with A B F G H K L M N Bolt Wt.
Pillow Block* Stabilizing Size L b s.
Ring MIN. MAX.
TWO BASE BOLT TYPE
3 5/8 3 SPBTS22216 STS216 3 1/2 6 7/8 9 5/8 11 13 3 1/2 1 3/8 1 11/32 4 7/8 - 3/16 3/4 33
3 15/16 3 3/16 SPBTS22217 STS217 3 3/4 7 1/4 9 7/8 11 13 3 1/2 1 1/4 1 7/16 4 15/16 - 3/16 3/4 43
4 1/8 3 3/8 SPBTS22218 STS218 4 7 3/4 10 3/8 11 5/8 13 3/4 3 7/8 1 1/2 1 17/32 6 1/4 - 3/16 3/4 50
4 1/2 3 13/16 SPBTS22220 STS220 4 1/2 8 11/16 11 5/8 13 1/8 15 1/4 4 3/8 1 3/4 1 3/4 6 - 3/16 7/8 71
FOUR BASE BOLT TYPE
3 5/8 3 S P B F S 22216 S F S 216 3 1/2 6 7/8 9 5/8 11 13 3 1/2 3 3/8 1 11/32 4 7/8 2 1/8 3/16 5/8 33
3 15/16 3 3/16 S P B F S 22217 S F S 217 3 3/4 7 1/4 9 7/8 11 13 3 1/2 1 1/4 1 7/16 4 15/16 2 1/8 3/16 5/8 43
4 1/8 3 3/8 S P B F S 22218 S F S 218 4 7 3/4 10 3/8 11 5/8 13 3/4 3 7/8 1 1/2 1 17/32 6 1/4 2 1/8 3/16 5/8 50
4 1/2 3 13/16 S P B F S 22220 S F S 220 4 1/2 8 11/16 11 5/8 13 1/8 15 1/4 4 3/8 1 3/4 1 3/4 6 2 3/8 3/16 3/4 71
4 7/8 4 3/16 S P B F S 22222 S F S 222 4 15/16 9 9/16 12 5/8 14 1/2 16 1/2 4 3/4 2 1 7/8 6 3/8 2 3/4 3/16 3/4 81
5 5/16 4 9/16 S P B F S 22224 S F S 224 5 1/4 10 1/4 13 1/4 14 1/2 16 1/2 4 3/4 2 1/8 1 15/16 7 3/8 2 3/4 3/16 3/4 90
5 7/8 4 15/16 S P B F S 22226 S F S 226 6 11 9/16 14 5/8 16 18 3/8 5 1/8 2 3/8 2 7/16 8 3 1/4 3/16 7/8 127
6 1/4 5 5/16 S P B F S 22228 S F S 228 6 11 3/4 16 17 1/8 20 1/8 5 7/8 2 3/8 2 1/8 7 3/4 3 3/8 3/16 1 149
6 5/8 5 3/4 S P B F S 22230 S F S 230 6 5/16 12 1/2 17 18 1/4 21 1/4 6 1/4 2 1/2 2 3/16 8 3/8 3 3/4 3/16 1 175
7 6 1/16 S P B F S 22232 S F S 232 6 11/16 13 5/16 17 3/8 19 1/4 22 6 1/4 2 5/8 2 3/16 8 3/4 3 3/4 3/16 1 210
7 7/16 6 7/16 S P B F S 22234 S F S 234 7 1/16 14 9/16 19 3/8 21 5/8 24 3/4 6 3/4 2 3/4 2 5/16 9 3/8 4 1/4 3/16 1 280
7 13/16 6 7/8 S P B F S 22236 S F S 236 7 1/2 15 1/2 20 7/8 23 5/8 26 3/4 7 1/8 3 2 9/16 9 11/16 4 5/8 3/16 1 305
8 3/8 7 1/4 S P B F S 22238 S F S 238 7 7/8 15 11/16 21 5/8 24 3/8 28 7 1/2 3 1/8 2 5/8 10 3/4 4 1/2 3/16 1 1/4 350
8 3/4 7 5/8 S P B F S 22240 S F S 240 8 1/4 17 3/16 22 1/2 25 29 1/2 8 3 3/8 2 11/16 10 13/16 5 3/16 1 1/4 42 0
9 9/16 8 5/16 S P B F S 22244 S F S 244 9 1/2 19 5/8 24 3/4 27 7/8 32 3/4 8 3/4 3 3/4 3 3/8 11 1/2 5 1/4 3/16 1 1/2 590
BMB-07 Roller.pmd 146 5/21/2007, 6:32 AM

Cylindrical
22200
22200 Adapter Mount Bearings
22200CKW33C3
22200 SERIES 2
ADAPTER 2
MOUNT 2
BEARINGS 0
0
CENTER GUIDANCE C
1-12 TAPER K
LUBE W
HOLES 3
AND GROOVE 3
ABMA C
INTERNAL CLEARANCE 3
Bearing Part B D W Wt.

Shaft Siz e Number L b s.
mm inches mm inches mm inches
2 7/16 22215CKW33C3 75 2.9528 130 5.1181 31 1.2205 3.9
2 1/2 22215CKW33C3 75 2.9528 130 5.1181 31 1.2205 3.9
2 11/16 22216CKW33C3 80 3.1496 140 5.5118 33 1.2992 4.6
2 3/4 22216CKW33C3 80 3.1496 140 5.5118 33 1.2992 4.6
2 15/16 22217CKW33C3 85 3.3465 150 5.9055 36 1.4173 5.9
3 22217CKW33C3 85 3.3465 150 5.9055 36 1.4173 5.9
3 3/16 22218CKW33C3 90 3.5433 160 6.2992 40 1.5748 7.5
3 7/16 22220CKW33C3 100 3.9370 180 7.0866 46 1.8110 11.1
3 1/2 22220CKW33C3 100 3.9370 180 7.0866 46 1.8110 11.1
3 11/16 22222CKW33C3 110 4.3307 200 7.8740 53 2.0866 15.9
3 15/16 22222CKW33C3 110 4.3307 200 7.8740 53 2.0866 15.9
4 22222CKW33C3 110 4.3307 200 7.8740 53 2.0866 15.9
4 3/16 22224CKW33C3 120 4.7244 215 8.4646 58 2.2835 19.8
4 7/16 22226CKW33C3 130 5.1181 230 9.0551 64 2.5197 24.8
4 1/2 22226CKW33C3 130 5.1181 230 9.0551 64 2.5197 24.8
4 15/16 22228CKW33C3 140 5.5118 250 9.8425 68 2.6772 31.3
5 22228CKW33C3 140 5.5118 250 9.8425 68 2.6772 31.3
5 3/16 22230CKW33C3 150 5.9055 270 10.6299 73 2.8740 39.5
5 7/16 22232CKW33C3 160 6.2992 290 11.4173 80 3.1496 50.2
5 1/2 22232CKW33C3 160 6.2992 290 11.4173 80 3.1496 50.2
5 15/16 22234CKW33C3 170 6.6929 310 12.2047 86 3.3858 62.0
6 22234CKW33C3 170 6.6929 310 12.2047 86 3.3858 62.0
6 7/16 22236CKW33C3 180 7.0866 320 12.5984 86 3.3858 64.8
6 1/2 22236CKW33C3 180 7.0866 320 12.5984 86 3.3858 64.8
6 15/16 22238CKW33C3 190 7.4803 340 13.3858 92 3.6220 78.5
7 22238CKW33C3 190 7.4803 340 13.3858 92 3.6220 78.5
7 3/16 22240CKW33C3 200 7.8740 360 14.1732 98 3.8583 94.0
7 1/2 22244CKW33C3 220 8.6614 400 15.7480 108 4.2520 130.0
7 15/16 22244CKW33C3 220 8.6614 400 15.7480 108 4.2520 130.0
8 22244CKW33C3 220 8.6614 400 15.7480 108 4.2520 130.0
BMB-07 Roller.pmd 147 5/21/2007, 6:32 AM

Adapter
22500
22500 Adapter Assemblies
SNW
S SLEEVE
N NUT
W WASHER
Shaft Siz e* Adapter Part Number C S T Wt.

L b s.
2 7/16 SNW15 X 2 7/16 3 7/8 2.296 43/64 2.3
2 1/2 SNW15 X 2 1/2 3 7/8 2.296 43/64 2.2
2 11/16 SNW16 X 2 11/16 4 5/32 2.376 43/64 2.4
2 3/4 SNW16 X 2 3/4 4 5/32 2.376 43/64 2.3
2 15/16 SNW17 X 2 15/16 4 13/32 2.486 45/64 2.9
3 SNW17 X 3 4 13/32 2.486 45/64 2.8
3 3/16 SNW18 X 3 3/16 4 21/32 2.646 25/32 3.1
3 7/16 SNW20 X 3 7/16 5 3/16 2.869 27/32 4.4
3 1/2 SNW20 X 3 1/2 5 3/16 2.869 27/32 4.2
3 11/16 SNW22 X 3 11/16 5 23/32 3.206 29/32 5.0
3 15/16 SNW22 X 3 15/16 5 23/32 3.206 29/32 4.8
4 SNW22 X 4 5 23/32 3.206 29/32 4.7
4 3/16 SNW24 X 4 3/16 6 1/8 3.466 15/16 6.7
4 7/16 SNW26 X 4 7/16 6 3/4 3.762 1 9.7
4 1/2 SNW26 X 4 1/2 6 3/4 3.762 1 9.5
4 15/16 SNW28 X 4 15/16 7 3/32 3.981 1 1/16 10.3
5 SNW28 X 5 7 3/32 3.981 1 1/16 10.1
5 3/16 SNW30 X 5 3/16 7 11/16 4.241 1 1/8 15.8
5 7/16 SNW32 X 5 7/16 8 1/16 4.578 1 3/16 15.6
5 1/2 SNW32 X 5 1/2 8 1/16 4.578 1 3/16 15.4
5 15/16 SNW34 X 5 15/16 8 21/32 4.847 1 7/32 19.4
6 SNW34 X 6 8 21/32 4.847 1 7/32 19.2
6 7/16 SNW36 X 6 7/16 9 1/16 5.038 1 1/4 20.5
6 1/2 SNW36 X 6 1/2 9 1/16 5.038 1 1/4 20.2
6 15/16 SNW38 X 6 15/16 9 15/32 5.261 1 9/32 23.4
7 SNW38 X 7 9 15/32 5.261 1 9/32 23.2
7 3/16 SNW40 X 7 3/16 9 27/32 5.484 1 11/32 30.7
7 1/2 SNW44 X 7 1/2 11 5.901 1 13/32 33.0
7 15/16 SNW44 X 7 15/16 11 5.901 1 13/32 32.3
8 SNW44 X 8 11 5.901 1 13/32 32.0
*Recommended shaft tolerances for adapter mounting:

2 7/16” +.000, -.003 4” - 6” +.000, -.005
2 1/2” - 4 incl. +.000, -.004 6” - 8” incl. +.000, -.006
BMB-07 Roller.pmd 148 5/21/2007, 6:32 AM

Cylindrical
22200
22200 Cylindrical Bore Bearings
22200CW33C3
22200 2
SERIES 2
CYLINDRICAL 2
MOUNT 0
BEARING 0
CENTER GUIDANCE C
LUBE HOLES W
AND 3
GROOVE 3
ABMA C
INTERNAL CLEARANCE 3
CYLINDRICAL BORE BEARINGS - 222 SERIES

SHAFT SIZE BEARING B D W
PART Wt.
S2 S3 NO. MM INCHES MM INCHES MM INCHES L b s.
3 5/8 3 22216CW33C3 80 3.1496 140 5.5118 33 1.2992 4.5
3 15/16 3 3/16 22217CW33C3 85 3.3465 150 5.9055 36 1.4173 5.6
4 1/8 3 3/8 22218CW33C3 90 3.5433 160 6.2992 40 1.5748 7.2
4 1/2 3 13/16 22220CW33C3 100 3.9370 180 7.0866 46 1.8110 10.5
4 7/8 4 3/16 22222CW33C3 110 4.3307 200 7.8740 53 2.0866 15.5
5 5/16 4 9/16 22224CW33C3 120 4.7244 215 8.4646 58 2.2835 19
5 7/8 4 15/16 22226CW33C3 130 5.1181 230 9.0551 64 2.5197 24.5
6 1/4 5 5/16 22228CW33C3 140 5.5118 250 9.8425 68 2.6772 31.0
6 5/8 5 3/4 22230CW33C3 150 5.9055 270 10.6299 73 2.8740 39.5
7 6 1/16 22232CW33C3 160 6.2992 290 11.4173 80 3.1496 49.5
7 7/16 6 7/16 22234CW33C3 170 6.6929 310 12.2047 86 3.3858 63.0
7 13/16 6 7/8 22236CW33C3 180 7.0866 320 12.5984 86 3.3858 65.0
8 3/8 7 1/4 22238CW33C3 190 7.4803 340 13.3858 92 3.6220 80.5
8 3/4 7 5/8 22240CW33C3 200 7.7840 360 14.1732 98 3.8583 96.0
9 9/16 8 5/16 22244CW33C3 220 8.6614 400 15.7480 108 4.2520 135
BMB-07 Roller.pmd 149 5/21/2007, 6:32 AM

22200 CYLINDRICAL
BORE LOCKNUT/WASHER
ANW
A PACKAGE OF
N LOCKNUT
W WASHER
LOCKNUT/LOCKWASHER PACKAGES and SHAFT DIMENSIONS
B Bearing Bore K e yw ay F G L P
Bearing L o ckn u t an d Threads Thread Thread Bearing Thread
L o ckw ash er J H K P er Relief Length S eat Relief
Siz e P ackag e Depth + Width Full Inch +1/64" + 1/64" +0" Dia.
MM INCHES
1/64" + 1/64" Depth -0" -0" -1/64" + .010"
-0" -0" Length
16 AN16/W16 P kg . 80 3.1496 1/8 3/8 15/16 12 5/32 11/16 1 9/32 3 1/32
17 AN17/W17 P kg . 85 3.3465 1/8 3/8 31/32 12 5/32 23/32 1 13/32 3 13/64
18 AN18/W18 P kg . 90 3.5433 5/32 3/8 1 1/16 12 5/32 13/16 1 9/16 3 25/64
20 AN20/W20 P kg . 100 3.9370 5/32 3/8 1 3/16 12 5/32 7/8 1 25/32 3 25/32
22 AN22/W22 P kg . 110 4.3307 3 /16 3/8 1 17/32 12 5/32 29/32 2 1/16 4 3/16
24 AN24/W24 P kg . 120 4.7244 3/16 3/8 1 1/14 12 5/32 15/16 2 1/4 4 37/64
26 AN26/W26 P kg . 130 5.1181 3/16 1/2 1 5/16 12 5/32 1 2 1/2 4 31/32
28 AN28/W28 P kg . 140 5.5118 3/16 5/8 1 3/8 12 5/32 1 1/16 2 21/32 5 23/64
30 AN30/W30 P kg . 150 5.9055 7/32 5/8 1 1/2 12 5/32 1 1/8 2 27/32 5 3/4
32 AN32/W32 P kg . 160 6.2992 15/64 5/8 1 9/16 8 1/4 1 3/16 3 1/8 6 3/32
34 AN34/W34 P kg . 170 6.6929 15/16 3/4 1 19/32 8 1/4 1 7/32 3 11/32 6 15/32
36 AN36/W36 P kg . 180 7.0866 15/64 3/4 1 5/8 8 1/4 1 1/4 3 11/32 6 7/8
38 AN38/W38 P kg . 190 7.4803 15/64 3/4 1 21/32 8 1/4 1 9/32 3 19/32 7 9/32
40 AN40/W40 P kg . 200 7.8740 15/64 7/8 1 23/32 8 1/4 1 11/32 3 13/16 7 21/32
44 AN44/W44 P kg . 220 8.6614 3/8 1 1/16 1 9/16 8 1/4 1 3/8 4 7/32 8 7/16
THREAD DIAMETER SHAFT DIAMETER

Bearing S1 S2 S3
Size MAJOR A PITCH MINOR
Bearing Seat Backing Shoulder Shaft Extension Shaft Fillet
Max.
MAX. MIN. MAX. MIN. MAX. MAX. MIN. MAX. MIN. MAX. MIN.
16 3.137 3.1258 3.0829 3.0770 3.0348 3.1511 3.1504 3.625 3.621 3.000 2.996 .079
17 3.340 3.3288 3.2859 3.2800 3.2378 3.3484 3.3475 3.938 3.934 3.188 3.184 .079
18 3.527 3.5158 3.4729 3.4655 3.4248 3.5452 3.5443 4.125 4.120 3.375 3.371 .079
20 3.918 3.9068 3.8639 3.8565 3.8158 3.9389 3.9380 4.500 4.495 3.813 3.809 .079
22 4.325 4.3138 4.2709 4.2626 4.2228 4.3332 4.3323 4.875 4.870 4.188 4.183 .079
24 4.716 4.7048 4.6619 4.6536 4.6138 4.7269 4.7260 5.313 5.308 4.563 4.558 .079
26 5.106 5.0948 5.0519 5.0436 5.0038 5.1209 5.1199 5.875 5.870 4.938 4.933 .098
28 5.497 5.4858 5.4429 5.4346 5.3948 5.5146 5.5136 6.250 6.244 5.313 5.308 .098
30 5.888 5.8768 5.8339 5.8256 5.7858 5.9090 5.9080 6.625 6.619 5.750 5.745 .098
32 6.284 6.2688 6.2028 6.1937 6.1306 6.3027 6.3017 7.000 6.994 6.063 6.057 .098
34 6.659 6.6438 6.5778 6.5687 6.5056 6.6964 6.6954 7.438 7.432 6.438 6.432 .118
36 7.066 7.0508 6.9848 6.9757 6.9126 7.0901 7.0891 7.813 7.807 6.875 6.869 .118
38 7.472 7.4568 7.3908 7.3817 7.3186 7.4845 7.4833 8.375 8.368 7.250 7.244 .118
40 7.847 7.8318 7.7658 7.7544 7.6936 7.8742 7.8770 8.750 8.743 7.625 7.619 .118
44 8.628 8.6128 8.5468 8.5347 8.4746 8.6662 8.6644 9.563 9.556 8.313 8.306 .118
BMB-07 Roller.pmd 150 5/21/2007, 6:32 AM

22500 TACONITE SEALS & ENDCOVERS
22500/22200
EC END
END E
COVERS C
COVERS
Dim. For use w ith Housing Part No.

Part Number E n d C o ver
L
Part No. 22500 Series 22200 Series
SPBT22515 X 2 7/16 EC 4.750
SPBT22515 X 2 1/2 EC 4.750 ST515 -
EC-15
SPBT22516 X 2 11/16 EC 5.375 S F 515 -
SPBT22516 X 2 3/4 EC 5.375 ST516 -
EC-16
SPBT22517 X 2 15/16 EC 5.375 S F 516 -
S P B T 22517 X 3 E C 5.375 ST517 ST216
SPBT22518 X3 3/16 EC EC-17
6.250 S F 517 S F 216
SPBT22520 X 3 7/16 EC 6.000 ST518 ST218
SPBT22520 X3 1/2 EC 6.250 EC-18
S F 518 S F 218
SPBF22515 X 2 7/16 EC 4.750 ST520 -
SPBF22515 X 2 1/2 EC 4.750 EC-20
S F 520 -
SPBF22516 X 2 11/16 EC 5.375 EC-22 S F 522 -
SPBF22516 X 2 3/4 EC 5.375
EC-24 S F 524 S F 222
SPBF22517 X 2 15/16 EC 5.375
EC-26 S F 526 S F 224
S P B F 22517 X 3 E C 5.375
SPBF22518 X 3 3/16 EC 6.250 E-28 S F 528 S F 226
SPBF22520 X 3 7/16 EC 6.000 EC-30 S F 530 S F 228
SPBF22520 X 3 1/2 EC 6.250 EC-32 S F 532 -
SPBF22522 X 3 11/16 EC 6.500 EC-34 S F 534 S F 232
SPBF22522 X 3 15/16 EC 6.500 EC-36 S F 536 S F 234
S P B F 22522 X 4 E C 6.500 EC-38 S F 538 S F 236
SPBF22524 X 4 3/16 EC 7.375 EC-40 S F 540 S F 238
SPBF22526 X 4 7/16 EC 8.000 EC-44 S F 544 -
SPBF22526 X 4 1/2 EC 8.000
SPBF22528 X 4 15/16 EC 7.500
S P B F 22528 X 5 E C 7.500
SPBF22530 X 5 3/16 EC 8.375
SPBF22532 X 5 7/16 EC 8.750
SPBF22532 X 5 1/2 EC 8.750
SPBF22534 X 5 15/16 EC 9.625
S P B F 22534 X 6 E C 9.625
SPBF22536 X 6 7/16 EC 10.000
SPBF22536 X 6 1/2 EC 10.000
SPBF22538 X 6 15/16 EC 10.750
S P B F 22538 X 7 E C 10.750
SPBF22540 X 7 3/16 EC 11.250
SPBF22544 X 7 1/2 EC 12.000
SPBF22544 X 7 15/16 EC 12.000
S P B F 22544 X 8 E C 12.000
S P B F 22544 X 8 E C 12.000
BMB-07 Roller.pmd 151 5/21/2007, 6:32 AM

22500 Taconite & End
TE Cover Combinations
E END COVER
C AND ONE STANDARD
LABYRINTH SEAL
T TACONITE
E AND END COVER
T TACONITE
C SEALS
DIMENSIONS DIMENSIONS
* Part Number * Part Number
L O L O
SPBT22516 X 2 7/16 TE 5 13/16 3 7/8 S P B F 22522 X 3 15/16 TE 7 9/16 5 3/4
SPBT22516 X 2 11/16 TE 6 7/16 4 1/2 S P B F 22524 X 4 3/16 TE 8 1/2 6
SPBT22517 X 2 15/16 TE 6 7/16 4 3/4 S P B F 22526 X 4 7/16 TE 9 3/16 6 1/4
SPBT22518 X 3 3/16 TE 6 13/16 5 S P B F 22528 X 4 15/16 TE 8 3/4 6 3/4
SPBT22520 X 3 7/16 TE 7 5/16 5 1/4 S P B F 22532 X 5 7/16 TE 10 7 3/8
SPBF22515 X 2 7/16 TE 5 13/16 3 7/8 S P B F 22534 X 5 15/16 TE 10 3/4 7 3/4
SPBF22516 X 2 11/16 TE 6 7/16 4 1/2 S P B F 22536 X 6 7/16 TE 11 3/16 8 1/4
SPBF22517 X 2 15/16 TE 6 7/16 4 3/4 S P B F 22538 X 6 15/16 TE 12 3/16 8 7/8
SPBF22518 X 3 3/16 TE 6 13/16 5 S P B F 22544 X 7 15/16 TE 13 7/16 9 7/8
SPBF22520 X 3 7/16 TE 7 5/16 5 1/4
Components included - When ordering part number SPBT22515 X 2 7/16 TE, for example, all of the following components are furnished:
1 - ST515 Housing 1 - 2215CWK33C3 Bearing
1 - SNW x 2 7/16 Adapter assembly 1 - TC515207 Taconite Seal
1 - EC15 End cover
Components are packaged individually.
* Not available from stock - contact Browning for delivery.
TC
DIMENSIONS DIMENSIONS
* Part Number * Part Number
L O L O
S P B T 22515 X 2 7/16 TC 6 7/8 3 7/8 S P B F 22522 X 3 15/16 TC 8 11/16 5 3/4
S P B T 22516 X 2 11/16 TC 7 1/2 4 1/2 S P B F 22524 X 4 3/16 TC 9 11/16 6
S P B T 22517 X 2 15/16 TC 7 1/2 4 3/4 S P B F 22526 X 4 7/16 TC 10 7/16 6 1/4
S P B T 22518 X 3 3/16 TC 7 15/16 5 S P B F 22528 X 4 15/16 TC 10 1/16 6 3/4
S P B T 22520 X 3 7/16 TC 8 7/16 5 1/4 S P B F 22532 X 5 7/16 TC 11 5/16 7 3/8
S P B F 22515 X 2 7/16 TC 6 7/8 3 7/8 S P B F 22534 X 5 15/16 TC 11 15/16 7 3/4
S P B F 22516 X 2 11/16 TC 7 1/2 4 1/2 S P B F 22536 X 6 7/16 TC 12 7/16 8 1/4
S P B F 22517 X 2 15/16 TC 7 1/2 4 3/4 S P B F 22538 X 6 15/16 TC 13 11/16 8 7/8
S P B F 22518 X 3 3/16 TC 7 15/16 5 S P B F 22544 X 7 15/16 TC 14 15/16 9 7/8
S P B F 22520 X 3 7/16 TC 8 7/16 5 1/4
Components included - When ordering part number SPBT22515 X 2 7/16 TE, for example, all of the following components are furnished:
1 - ST515 Housing 1 - 22215CWK33C3 Bearing
1 - SNW x 2 7/16 Adapter assembly 1 - TC515207 Taconite Seal
Components are packaged individually.
* Not available from stock - contact Browning for delivery.
BMB-07 Roller.pmd 152 5/21/2007, 6:32 AM

22200 Series
T2000-2 BOLT
TAKE-UP FRAME T
22200 2
SPHERICAL 0
BEARING 0
BEARING SERIES 0
SHAFT DIA CODE A
TWO BOLT MOUNTINGS 2
SHAFT FRAME Dimensions In Inches

UNIT
DIA. PART TRAVEL N WT.
IN NO. A B C D E F G H J K L M
N o. Dia.
1 7/16 12T2000A2 12 29 31 2 1/2 4 1/2 6 3/16 11/16 5 1/4 4 11 8 1/2 6 5/8 0 2 9/16 55
18T2000A2 18 35 37 2 1/2 4 1/2 6 3/16 11/16 5 1/4 4 11 8 1/2 6 5/8 0 2 9/16 60
24T2000A2 24 41 43 2 1/2 4 1/2 6 3/16 11/16 5 1/4 4 11 8 1/2 6 5/8 0 2 9/16 65
30T2000A2 30 47 49 2 1/2 4 1/2 6 3/16 11/16 5 1/4 4 11 8 1/2 6 5/8 0 2 9/16 69
36T2000A2 36 53 55 2 1/2 4 1/2 6 3/16 11/16 5 1/4 4 11 8 1/2 6 5/8 0 2 9/16 75
1 11/16 12T2000B2 12 29 31 2 1/2 4 1/2 6 3/16 11/16 5 1/4 4 11 8 1/2 6 3/4 0 2 9/16 55
18T2000B2 18 35 37 2 1/2 4 1/2 6 3/16 11/16 5 1/4 4 11 8 1/2 6 3/4 0 2 9/16 60
24T2000B2 24 41 43 2 1/2 4 1/2 6 3/16 11/16 5 1/4 4 11 8 1/2 6 3/4 0 2 9/16 65
30T2000B2 30 47 49 2 1/2 4 1/2 6 3/16 11/16 5 1/4 4 11 8 1/2 6 3/4 0 2 9/16 69
36T2000B2 36 53 55 2 1/2 4 1/2 6 3/16 11/16 5 1/4 4 11 8 1/2 6 3/4 0 2 9/16 75
1 15/16 12T2000C2 12 29 31 2 1/2 4 1/2 6 3/16 11/16 5 1/4 4 11 8 1/2 7 5/8 0 2 11/16 55
18T2000C2 18 35 37 2 1/2 4 1/2 6 3/16 11/16 5 1/4 4 11 8 1/2 7 5/8 0 2 11/16 60
24T2000C2 24 41 43 2 1/2 4 1/2 6 3/16 11/16 5 1/4 4 11 8 1/2 7 5/8 0 2 11/16 65
30T2000C2 30 47 49 2 1/2 4 1/2 6 3/16 11/16 5 1/4 4 11 8 1/2 7 5/8 0 2 11/16 69
36T2000C2 36 53 55 2 1/2 4 1/2 6 3/16 11/16 5 1/4 4 11 8 1/2 7 5/8 0 2 11/16 75
2 3/16 18T2000D2 18 38 3/4 41 1/4 3 5 1/8 7 1/16 11/16 6 1/4 4 3/4 13 1/4 10 3/8 8 7/8 0 2 3/4 86
24T2000D2 24 44 3/4 47 1/4 3 5 1/8 7 1/16 11/16 6 1/4 4 3/4 13 1/4 10 3/8 8 7/8 0 2 3/4 88
30T2000D2 30 50 3/4 53 1/4 3 5 1/8 7 1/16 11/16 6 1/4 4 3/4 13 1/4 10 3/8 8 7/8 0 2 3/4 90
36T2000D2 36 56 3/4 59 1/4 3 5 1/8 7 1/16 11/16 6 1/4 4 3/4 13 1/4 10 3/8 8 7/8 0 2 3/4 96
2 7/16 18T2000E2 18 38 3/4 41 1/4 3 5 1/8 7 1/16 11/16 6 1/4 4 3/4 13 1/4 10 3/8 8 7/8 0 2 3/4 86
24T2000E2 24 44 3/4 47 1/4 3 5 1/8 7 1/16 11/16 6 1/4 4 3/4 13 1/4 10 3/8 8 7/8 0 2 3/4 88
30T2000E2 30 50 3/4 53 1/4 3 5 1/8 7 1/16 11/16 6 1/4 4 3/4 13 1/4 10 3/8 8 7/8 0 2 3/4 90
36T2000E2 36 56 3/4 59 1/4 3 5 1/8 7 1/16 11/16 6 1/4 4 3/4 13 1/4 10 3/8 8 7/8 0 2 3/4 96
2 11/16 18T2000F2 18 41 1/2 44 1/4 3 6 8 5/8 13/16 7 5 14 1/4 11 3/4 10 7/16 0 2 7/8 138
24T2000F2 24 47 1/2 50 1/4 3 6 8 5/8 13/16 7 5 14 1/4 11 3/4 10 7/16 0 2 7/8 148
30T2000F2 30 53 1/2 56 1/4 3 6 8 5/8 13/16 7 5 14 1/4 11 3/4 10 7/16 0 2 7/8 155
36T2000F2 36 59 1/2 62 1/4 3 6 8 5/8 13/16 7 5 14 1/4 11 3/4 10 7/16 0 2 7/8 168
48T2000F2 48 71 1/2 74 1/4 3 6 8 5/8 13/16 7 5 14 1/4 11 3/4 10 7/16 0 2 7/8 185
2 15/16 18T2000G2 18 41 1/2 44 1/4 3 6 8 5/8 13/16 7 5 14 1/4 11 3/4 10 7/16 0 2 7/8 138
24T2000G2 24 47 1/2 50 1/4 3 6 8 5/8 13/16 7 5 14 1/4 11 3/4 10 7/16 0 2 7/8 148
30T2000G2 30 53 1/2 56 1/4 3 6 8 5/8 13/16 7 5 14 1/4 11 3/4 10 7/16 0 2 7/8 155
36T2000G2 36 59 1/2 62 1/4 3 6 8 5/8 13/16 7 5 14 1/4 11 3/4 10 7/16 0 2 7/8 168
48T2000G2 48 71 1/2 74 1/4 3 6 8 5/8 13/16 7 5 14 1/4 11 3/4 10 7/16 0 2 7/8 185
3 3/16 18T2000H2 18 43 1/4 46 3 6 8 5/8 13/16 7 6 16 12 5/8 11 0 2 7/8 150
24T2000H2 24 49 1/4 52 3 6 8 5/8 13/16 7 6 16 12 5/8 11 0 2 7/8 160
30T2000H2 30 55 1/4 58 3 6 8 5/8 13/16 7 6 16 12 5/8 11 0 2 7/8 170
36T2000H2 36 61 1/4 64 3 6 8 5/8 13/16 7 6 16 12 5/8 11 0 2 7/8 180
48T2000H2 48 73 1/4 76 3 6 8 5/8 13/16 7 6 16 12 5/8 11 0 2 7/8 200
3 7/16 18T2000J2 18 43 1/4 46 3 6 8 5/8 13/16 7 6 16 12 5/8 12 3/8 0 2 1 150
24T2000J2 24 49 1/4 52 3 6 8 5/8 13/16 7 6 16 12 5/8 12 3/8 0 2 1 160
30T2000J2 30 55 1/4 58 3 6 8 5/8 13/16 7 6 16 12 5/8 12 3/8 0 2 1 170
36T2000J2 36 61 1/4 64 3 6 8 5/8 13/16 7 6 16 12 5/8 12 3/8 0 2 1 180
48T2000J2 48 73 1/4 76 3 6 8 5/8 13/16 7 6 16 12 5/8 12 3/8 0 2 1 200
*”P” = “G” + “R” = shaft height of manufacturer’s pillow block.

Other pillow block mounting hole patterns are available on request.
Type of manufacturer’s pillow block and number of mounting holes should be stated on purchase order.
For sizes of take-up frames not listed, contact the Browning Engineering Department.
BMB-07 Roller.pmd 153 5/21/2007, 6:32 AM

22200 Series
T2000-4 BOLT
T TAKE-UP FRAME
2 22200
0 SPHERICAL
0 BEARING
0 SERIES
A SHAFT PIN CODE
4 FOUR BOLT MOUNTING
SHAFT FRAME Dimensions In Inches

DIA. PART TRAVEL UNIT
N WT.
IN NO. A B C D E F G H J K L M
N o. Dia.
2 3/16 18T2000D4 18 38 3/4 41 1/4 3 5 1/8 7 1/16 11/16 6 1/4 4 3/4 13 1/4 10 3/8 8 7/8 2 4 5/8 86
24T2000D4 24 44 3/4 47 1/4 3 5 1/8 7 1/16 11/16 6 1/4 4 3/4 13 1/4 10 3/8 8 7/8 2 4 5/8 88
30T2000D4 30 50 3/4 53 1/4 3 5 1/8 7 1/16 11/16 6 1/4 4 3/4 13 1/4 10 3/8 8 7/8 2 4 5/8 90
36T2000D4 36 56 3/4 59 1/4 3 5 1/8 7 1/16 11/16 6 1/4 4 3/4 13 1/4 10 3/8 8 7/8 2 4 5/8 96
2 7/16 18T2000E4 18 38 3/4 41 1/4 3 5 1/8 7 1/16 11/16 6 1/4 4 3/4 13 1/4 10 3/8 8 7/8 1 7/8 4 5/8 86
24T2000E4 24 44 3/4 47 1/4 3 5 1/8 7 1/16 11/16 6 1/4 4 3/4 13 1/4 10 3/8 8 7/8 1 7/8 4 5/8 88
30T2000E4 30 50 3/4 53 1/4 3 5 1/8 7 1/16 11/16 6 1/4 4 3/4 13 1/4 10 3/8 8 7/8 1 7/8 4 5/8 90
36T2000E4 36 56 3/4 59 1/4 3 5 1/8 7 1/16 11/16 6 1/4 4 3/4 13 1/4 10 3/8 8 7/8 1 7/8 4 5/8 96
2 11/16 18T2000F4 18 41 1/2 44 1/4 3 6 8 5/8 13/16 7 5 14 1/4 11 3/4 10 7/16 2 1/8 4 3/4 138
24T2000F4 24 47 1/2 50 1/4 3 6 8 5/8 13/16 7 5 14 1/4 11 3/4 10 7/16 2 1/8 4 3/4 148
30T2000F4 30 53 1/2 56 1/4 3 6 8 5/8 13/16 7 5 14 1/4 11 3/4 10 7/16 2 1/8 4 3/4 155
36T2000F4 36 59 1/2 62 1/4 3 6 8 5/8 13/16 7 5 14 1/4 11 3/4 10 7/16 2 1/8 4 3/4 168
48T2000F4 48 71 1/2 74 1/4 3 6 8 5/8 13/16 7 5 14 1/4 11 3/4 10 7/16 2 1/8 4 3/4 185
2 15/16 18T2000G4 18 41 1/2 44 1/4 3 6 8 5/8 13/16 7 5 14 1/4 11 3/4 10 7/16 2 1/8 4 3/4 138
24T2000G4 24 47 1/2 50 1/4 3 6 8 5/8 13/16 7 5 14 1/4 11 3/4 10 7/16 2 1/8 4 3/4 148
30T2000G4 30 53 1/2 56 1/4 3 6 8 5/8 13/16 7 5 14 1/4 11 3/4 10 7/16 2 1/8 4 3/4 155
36T2000G4 36 59 1/2 62 1/4 3 6 8 5/8 13/16 7 5 14 1/4 11 3/4 10 7/16 2 1/8 4 3/4 168
48T2000G4 48 71 1/2 74 1/4 3 6 8 5/8 13/16 7 5 14 1/4 11 3/4 10 7/16 2 1/8 4 3/4 185
3 3/16 18T2000H4 18 43 1/4 46 3 6 8 5/8 13/16 7 6 16 12 5/8 11 2 1/8 4 3/4 150
24T2000H4 24 49 1/4 52 3 6 8 5/8 13/16 7 6 16 12 5/8 11 2 1/8 4 3/4 160
30T2000H4 30 55 1/4 58 3 6 8 5/8 13/16 7 6 16 12 5/8 11 2 1/8 4 3/4 170
36T2000H4 36 61 1/4 64 3 6 8 5/8 13/16 7 6 16 12 5/8 11 2 1/8 4 3/4 180
48T2000H4 48 73 1/4 76 3 6 8 5/8 13/16 7 6 16 12 5/8 11 2 1/8 4 3/4 200
3 7/16 18T2000J4 18 43 1/4 46 3 6 8 5/8 13/16 7 6 16 12 5/8 12 3/8 2 3/8 4 7/8 150
24T2000J4 24 49 1/4 52 3 6 8 5/8 13/16 7 6 16 12 5/8 12 3/8 2 3/8 4 7/8 160
30T2000J4 30 55 1/4 58 3 6 8 5/8 13/16 7 6 16 12 5/8 12 3/8 2 3/8 4 7/8 170
36T2000J4 36 61 1/4 64 3 6 8 5/8 13/16 7 6 16 12 5/8 12 3/8 2 3/8 4 7/8 180
48T2000J4 48 73 1/4 76 3 6 8 5/8 13/16 7 6 16 12 5/8 12 3/8 2 3/8 4 7/8 200
3 15/16 18T2000K4 18 47 1/4 50 3 6 8 5/8 13/16 7 7 1/4 20 14 5/8 13 9/16 2 3/4 4 7/8 177
24T2000K4 24 53 1/4 56 3 6 8 5/8 13/16 7 7 1/4 20 14 5/8 13 9/16 2 3/4 4 7/8 187
30T2000K4 30 59 1/4 62 3 6 8 5/8 13/16 7 7 1/4 20 14 5/8 13 9/16 2 3/4 4 7/8 197
36T2000K4 36 65 1/4 68 3 6 8 5/8 13/16 7 7 1/4 20 14 5/8 13 9/16 2 3/4 4 7/8 207
48T2000K4 48 77 1/4 80 3 6 8 5/8 13/16 7 7 1/4 20 14 5/8 13 9/16 2 3/4 4 7/8 226
4 7/16 18T2000M4 18 53 55 1/2 4 7 10 1/4 15/16 7 3/4 8 1/2 23 1/2 17 1/2 15 5/16 3 1/4 4 1 280
24T2000M4 24 59 61 1/2 4 7 10 1/4 15/16 7 3/4 8 1/2 23 1/2 17 1/2 15 5/16 3 1/4 4 1 296
30T2000M4 30 65 67 1/2 4 7 10 1/4 15/16 7 3/4 8 1/2 23 1/2 17 1/2 15 5/16 3 1/4 4 1 306
36T2000M4 36 71 73 1/2 4 7 10 1/4 15/16 7 3/4 8 1/2 23 1/2 17 1/2 15 5/16 3 1/4 4 1 318
48T2000M4 48 83 85 1/2 4 7 10 1/4 15/16 7 3/4 8 1/2 23 1/2 17 1/2 15 5/16 3 1/4 4 1 345
4 15/16 18T2000N4 18 53 55 1/2 4 7 10 1/4 15/16 7 3/4 8 1/2 23 1/2 17 1/2 16 9/16 3 3/8 4 1 1/8 280
24T2000N4 24 59 61 1/2 4 7 10 1/4 15/16 7 3/4 8 1/2 23 1/2 17 1/2 16 9/16 3 3/8 4 1 1/8 296
30T2000N4 30 65 67 1/2 4 7 10 1/4 15/16 7 3/4 8 1/2 23 1/2 17 1/2 16 9/16 3 3/8 4 1 1/8 306
36T2000N4 36 71 73 1/2 4 7 10 1/4 15/16 7 3/4 8 1/2 23 1/2 17 1/2 16 9/16 3 3/8 4 1 1/8 318
48T2000N4 48 83 85 1/2 4 7 10 1/4 15/16 7 3/4 8 1/2 23 1/2 17 1/2 16 9/16 3 3/8 4 1 1/8 345
*”P” = “G” + “R” = shaft height of manufacturer’s pillow block.

Other pillow block mounting hole patterns are available on request.
Type of manufacturer’s pillow block and number of mounting holes should be stated on purchase order.
For sizes of take-up frames not listed, contact the Browning Engineering Department.
BMB-07 Roller.pmd 154 5/21/2007, 6:32 AM

Spherical Roller Bearings 22200 and 22500 Series
This chart displays the Browning 22200 and 22500 Series Spherical Roller Bearing’s load capacity for a given L10 life, speed and shaft size.
Values in the table represent loads at ideal conditions. For combined load determination, see THE BEARING SELECTION SECTION, page 269.
Areas designated by “-” exceed maximum speed value.
Match Bore Size

L10 REVOLUTIONS PER MINUTE
Size Rating Hours 50 100 150 250 500 750 1000 1500 1750 2000 2500 3000 3500
5000 13966 13966 13966 13966 10609 9394 8618 7631 7286 7000 6546 6198 —
10000 13966 13966 12367 10609 8618 7631 7000 6198 5918 5685 5317 5034 —
22215 47,700 30000 12367 10045 8894 7631 6198 5488 5034 4458 4256 4089 3824 3621 —
50000 10609 8618 7631 6546 5317 4708 4319 3824 3652 3508 3281 3106 —
100000 8618 7000 6198 5317 4319 3824 3508 3106 2966 2849 2665 2523 —
5000 15550 15550 15550 14540 11811 10458 9593 8494 8111 7792 7288 6900 —
10000 15550 15550 13767 11811 9593 8494 7792 6900 6588 6329 5919 5604 —
22216 53,100 30000 13767 11182 9901 8494 6900 6109 5604 4962 4738 4552 4257 4031 —
50000 11811 9593 8494 7288 5919 5241 4808 4257 4065 3905 3652 3458 —
100000 9593 7792 6900 5919 4808 4257 3905 3458 3302 3172 2967 2809 —
5000 16134 16134 16134 15088 12255 10852 9954 8814 8416 8086 7562 7159 —
10000 16134 16134 14285 12255 9954 8814 8086 7159 6836 6567 6142 5815 —
22217 55,100 30000 14285 11603 10274 8814 7159 6339 5815 5149 4917 4723 4418 4183 —
50000 12255 9954 8814 7562 6142 5439 4989 4418 4218 4052 3790 3588 —
100000 9954 8086 7159 6142 4989 4418 4052 3588 3426 3292 3078 2915 —
5000 21405 21405 21405 20017 16259 14397 13206 11694 11165 10727 10032 — —
10000 21405 21405 18952 16259 13206 11694 10727 9498 9069 8713 8149 — —
22218 73,100 30000 18952 15394 13630 11694 9498 8410 7715 6831 6523 6267 5861 — —
50000 16259 13206 11694 10032 8149 7215 6619 5861 5596 5376 5028 — —
100000 13206 10727 9498 8149 6619 5861 5376 4760 4545 4367 4084 — —
5000 27965 27965 27965 26151 21241 18808 17253 15277 14587 14014 — — —
10000 27965 27965 24759 21241 17253 15277 14014 12409 11848 11383 — — —
22220 95,500 30000 24759 20111 17807 15277 12409 10988 10079 8925 8521 8187 — — —
50000 21241 17253 15277 13107 10646 9427 8647 7657 7311 7024 — — —
100000 17253 14014 12409 10646 8647 7657 7024 6219 5938 5705 — — —
5000 30745 30745 30745 28752 23354 20679 18969 16797 16038 15408 — — —
10000 30745 30745 27222 23354 18969 16797 15408 13643 13027 12515 — — —
22222 105,000 30000 27222 22111 19579 16797 13643 12081 11082 9813 9369 9001 — — —
50000 23354 18969 16797 14410 11705 10364 9507 8418 8038 7722 — — —
100000 18969 15408 13643 11705 9507 8418 7722 6838 6529 6272 — — —
5000 35430 35430 35430 33134 26913 23831 21860 19356 18482 — — — —
10000 35430 35430 31370 26913 21860 19356 17756 15722 15012 — — — —
22224 121,000 30000 31370 25480 22562 19356 15722 13922 12770 11308 10797 — — — —
50000 26913 21860 19356 16606 13488 11944 10956 9701 9263 — — — —
100000 21860 17756 15722 13488 10956 9701 8899 7880 7524 — — — —
5000 41580 41580 41580 38884 31584 27966 25654 22716 21689 — — — —
10000 41580 41580 36814 31584 25654 22716 20837 18451 17617 — — — —
22226 142,000 30000 36814 29903 26478 22716 18451 16338 14987 13270 12671 — — — —
50000 31584 25654 22716 19488 15829 14016 12857 11385 10870 — — — —
100000 25654 20837 18451 15829 12857 11385 10443 9247 8829 — — — —
5000 46850 46850 46850 43813 35587 31511 28906 25595 — — — — —
10000 46850 46850 41481 35587 28906 25595 23479 20790 — — — — —
22228 160,000 30000 41481 33693 29834 25595 20790 18409 16887 14952 — — — — —
50000 35587 28906 25595 21959 17836 15793 14487 12828 — — — — —
100000 28906 23479 20790 17836 14487 12828 11767 10420 — — — — —
5000 55930 55930 55930 52302 42482 37617 34506 30554 — — — — —
10000 55930 55930 49518 42482 34506 30554 28028 24818 — — — — —
22230
191,000 30000 49518 40221 35614 30554 24818 21975 20158 17850 — — — — —
50000 42482 34506 30554 26213 21292 18853 17294 15313 — — — — —
100000 34506 28028 24818 21292 17294 15313 14047 12438 — — — — —
5000 65885 65885 65885 61612 50045 44313 40649 35993 — — — — —
10000 65885 65885 58333 50045 40649 35993 33017 29236 — — — — —
225,000
22232 30000 58333 47381 41954 35993 29236 25887 23747 21027 — — — — —
50000 50045 40649 35993 30879 25082 22209 20373 18039 — — — — —
100000 40649 33017 29236 25082 20373 18039 16548 14653 — — — — —
5000 73790 73790 73790 69006 56050 49630 45527 — — — — — —
10000 73790 73790 65333 56050 45527 40312 36979 — — — — — —
252,000
22234 30000 65333 53067 46989 40312 32744 28994 26596 — — — — — —
50000 56050 45527 40312 34585 28092 24874 22817 — — — — — —
100000 45527 36979 32744 28092 22817 20204 18534 — — — — — —
5000 77600 77600 77600 69006 56050 49630 45527 — — — — — —
10000 77600 77600 65333 56050 45527 40312 36979 — — — — — —
22236 265,000 30000 65333 53067 46989 40312 32744 28994 26596 — — — — — —
50000 56050 45527 40312 34585 28092 24874 22817 — — — — — —
100000 45527 36979 32744 28092 22817 20204 18534 — — — — — —
5000 73198 73198 73198 68458 55605 49237 45165 — — — — — —
10000 73198 73198 64814 55605 45165 39993 36686 — — — — — —
22238 250,000 30000 64814 52645 46616 39993 32484 28764 26385 — — — — — —
50000 55605 25654 22716 19488 15829 14016 12857 — — — — — —
100000 45165 36686 32484 27869 22636 20044 18386 — — — — — —
5000 96045 96045 96045 89817 72954 64598 59257 — — — — — —
10000 96045 96045 85036 72954 59257 52470 48132 — — — — — —
22240 328,000 30000 85036 69071 61160 52470 42619 37738 34617 — — — — — —
50000 72954 59257 52470 45015 36564 32376 29699 — — — — — —
100000 59257 48132 42619 36564 29699 26297 24123 — — — — — —
5000 115960 115960 115960 108437 88079 77991 — — — — — — —
10000 115960 115945 102666 88079 71542 63348 — — — — — — —
22244 396,000 30000 102666 83390 73839 63348 51455 45561 — — — — — — —
50000 88079 71542 63348 54347 44144 39088 — — — — — — —
100000 71542 58110 51455 44144 35856 31749 — — — — — — —
BMB-07 Roller.pmd 155 5/21/2007, 6:32 AM

Bearings
INTERCHANGE
BALL BEARING HEAD-TO-HEAD
OVERVIEW PAGES154-161
Take some time to review the first half of this section to convince yourself
that Browning ball bearings are the best general purpose mounted
ball bearing available. You will see that Browning Ball Bearings consist
of all the necessary design features required for typical operation. When
Browning goes “head-to-head” with other brands it is clear that Browning
has all the value added extras. This is why Browning ball bearings
perform reliably and you can be confident about the same dependable
manufacturing known for over a hundred years. Let us take you to a
new level of value and dependability you can count on! Take Browning
“head-to-head” and you will see for yourself . . . we are winning!
DODGE SC vs. BROWNING VPS Pg 158
FAFNIR YAS vs. BROWNING VPS Pg 160
MB C-25 vs. BROWNING VPS Pg 162
LINK-BELT P3-U200N vs. BROWNING VPS Pg 164
EPT does not assume responsibility for the accuracy of this document. The information contained
herein is based upon current published data available at the time of printing. All interchanges
should be compared with actual current manufacturing drawings. See EPT standard terms and
conditions at the back of the catalog. For more information, contact Applications Engineering at
219-465-2211.
* The following trade names, trademarks and/or registered trademarks are used in this material
by EPT/Emerson Power Transmission Corporation for comparison purposes only, are NOT
owned or controlled by EPT/Emerson Power Transmission Corporation and are believed to be
owned by the following parties: AMI: Asahi Seiko Co., Ltd.; Boston: IMO Industries, Inc. Dodge:
Reliance Electric Industrial Company; Fafnir: Timken U.S. Corporation; Hub City: Hub City,
Inc.; Link-Belt: Link-Belt Construction Equipment Company, L.P., L.L.L.P.; MB and Rexnord:
Rexnord Corporation; Miether: Alco Industries, Inc.; Moline: Moline Bearing Company; NTN:
NTN Corporation; NSK: NSK Ltd. Corporation; Peer: Peer Bearing Company; Poly-V: RM
Engineered Products, Inc.; RHP: NSK Europe Limited Corporation; Royersford: Royersford
Foundry & Machine Co., Inc.; SKF: SKF USA, Inc.; Torrington TDC: The Torrington Company.
Emerson Power Transmission is not affiliated with any of the foregoing companies.
BROWNING, SEALMASTER, and MULTI-TRAP are registered trademarks of Emerson Power

Transmission.
156
BMB-07 Roller.pmd 156 5/21/2007, 6:32 AM

ALPHA-NUMERIC BALL AND ROLLER BEARING
INTERCHANGE BY PART DESCRIPTION OR PART NUMBER
PAGES 166-259
This interchange section matches units by five characteristics:
1. Series (light duty, intermediate duty, normal duty, medium duty)
2. Housing material (cast iron, malleable or ductile, stamped steel)
3. Housing style (pillow block, two bolt flange, tapped base, etc.)
4. Bore size (size)
5. Critical dimension by housing (see table below)
Example
Brow ning Part# Note Code
Part# Description Siz e Manufacturer
Description
023206 3" D odge PB-950NE-3 L,M,1,4
More #’s More #’s More #’s More #’s More #’s
YTU 7/8 7/8 Fafnir VTWS-214 =
ZA-2211 2 11/16" Rexnord SPB-1000NE-2 11/16 G,X
The part number The The manufacturer The Browning part The note code
or part description bore of the unit in description that identifies slight
of the unit to size column one replaces the unit differences between
interchange in column one units (See Table
below for details)
CRITICAL DIMENSIONS
Pillow Block 2 Bolt Flange 3 Bolt Flange 4 Bolt Flange
Tapped Base Flange Cartridge Take-up Cartridge

and Bolt Tap
NOTE CODE
The note code identifies slight differences between interchanged units. Browning Manufacturing does not assume responsibility for the accuracy
of this document. The information contained herein is based upon current published data available at the time of printing. All interchanges should
be compared with actual, current manufacturing drawings. See EPT standard terms and conditions at the back of this catalog. For more information,
contact Applications Engineering at 219-465-2211.
A Bolt Centers or OD within 1/64 S Slot Width within 1/8
B Bolt Centers or OD within 1/16 T Bolt Tap Differs
C OD Within 1/8 U Slot Spacing within 1/64
D Bolt Centers greater than 1/8 V Slot Spacing within 1/16
E Bolt Circle within 1/64 W Bolt Spacing Maximum within 1/64
F Bolt Spacing Minimum within 1/64 X Bolt Spacing Maximum within 1/8
G Bolt Spacing Minimum within 1/8 Y Bolt Spacing Maximum within 1/4
H Bolt Spacing Minimum within 1/4 Z Bolt Spacing Maximum within 1/2
J Bolt Spacing Minimum within 1/2 $ Bolt Spacing Short Dimension within 1/64
K Pilot within 1/64 $$ Bolt Spacing Short Dimension within 1/16
L Bolt Spacing Minimum Greater than ½ = EXACT
M Bolt Spacing Maximum Greater than ½ 1 Different Locking Devices
N Base to Center with 1/64 2 Different Rolling Elements
P Base to Center with 1/16 3 Only One Has a Split Housing
Q Slot Width within 1/16 4 Different Housing Materials
R Slot Width within 1/64 Black Ball Bearings
Red Roller Bearings
BMB-07 Roller.pmd 157 5/21/2007, 6:32 AM

Bearings
DODGE FEATURES
PRODUCT COMPARISION
BROWNING BOA™ DODGE BROWNING Dodge DODGE 65° LOCKING
Set Screw Eccentric Concentric Set ScrewEccentric Concentric AH/NK AH/NK
200 Series 200 Series 200 Series
V PS VPE VPB P2B-SC P2B-SXR P2B-DL/DLAH VPS AH P2B-SCAH
VPLS VPLE VPLB P2B-SCB P2B-SXRB P2B-DLB VPLS AH P2B-SCBAH
VTBS VTBE VTBB TB-SC - TB-DL VF2S AH F2B-SCAH
- - - - - - VF4S AH F4B-SCAH
- - - - - -
VF2S VF2E VF2B F2B-SC F2B-SXR F2B-DL VPS NK P2B-SCNP
VF4S VF4E VF4B F4B-SC F4B-SXR F4B-DL VPE NK -
- - - - - - VPLS NK P2B-SCBNP
VFBS - VFBB FB-SC - FB-DL VPLE NK -
DODGE INNER
- - - - - - VTBS NK TB-SCNP
VTWS VTWE - WSTU-SC WSTU-SXR - VF2S NK F2B-SCNP
- - - - - - VF4S NK F4B-SCNP
- - - - - - VFBS NK* FB-SCNP
- - - - - - VTWS NK WSTU-SCNP
VS VE VB INS-SC INS-SXR INS-DL VTNS NK* NSTU-SCNP
- - - - - -
V ER - - - - -
300 Series 300 Series 300Series
VPS - VPB P2B-SCM - P2B-DLM VPS AH P2B-SCMAH
VF2S - VF2B F2B-SCM - F2B-DLM VF2S AH F2B-SCMAH
VF4S - VF4B F4B-SCM - F4B-DLM VF4S AH F4B-SCMAH
VFCS - VFCB FC-SCM - FC-DLM
VTWS - VTWB WSTU-SCM - - DODGE SEAL
- - - - - -
- - - - - -
VS - VB INS-SCM - INS-DLM
100 Series 100 Series
VPS VPE - P2B-VSC P2B-SXV -
VPLS VPLE - P2B-VSCB P2B-SXVB -
- - - - - -
VF2S VF2E - F2B-VSC F2B-SXV -
VF4S VF4E - F4B-VSC F4B-SXV -
VTWS VTWE - WSTU-VSC WSTU-SXV -
- - - - - -
DODGE SCREW
VPS-M VPE-M - - - -
VF2S-M VF2E-M - LFT-SC - -
VF3S-M VF3E-M - LF-SC - -
SSPS SSPE - P2B-SL P2B-SLX -
SSF2S SSF2E - F2B-SL F2B-SLX -
SSF3TS SSF3TE - - - -
SSRPS SSRPE - - - -
RUBRS RUBRE RUBRB - - -
SLS SLE - - - -
LS
VS
LE
VE
-
-
-
INS-VSC
-
INS-SXV
-
-
CUP POINT
DODGE HOUSING
Based on Browning complete offering.
Browning vs. Dodge

HEAD-TO-HEAD...
...AND WINNING
BMB-07 Roller.pmd 158 5/21/2007, 6:32 AM

BROWNING FEATURES
BROWNING 120° LOCKING
Browning 120° set screw
Browning vs. Dodge
HEAD-TO-HEAD...
locking provides a
balanced three point
contact for the highest
...AND WINNING
concentricity available with
set screw locking. For truly
concentric clamping see
BOA™ page 52.
BROWNING INNER FEATURE COMPARISION

Browning’s wider inner ring Browning Dodge
contributes to higher shaft
stability, quieter operation Inner Length 1.6875 1.531
and reduced vibration.
Inner Hardening Zone Hardening Zone Hardening
Set Screw Spacing 120° 65°
Precision
Set Screw Type Ground Diamond Cup Point
Faceted
BROWNING SEAL
Shielded Single Shielded Single
Sealing Lip Contacts Lip Contacts
The Browning shielded
single lip contact seal is Flinger Yes No
proven as an effective
barrier to contamination. Retainer Type Ball Riding Ball Riding
The auxiliary flinger is a
value added extra. The
Retainer Material Nylon Nylon
flinger “slings” debris away Outer Width 0.748 0.748
from the sealing area as it
spins with the inner ring to Rivet in Outer Rivet in Outer
Anti-Rotation Race Race
increase seal life.
Grease Groove Grease Groove
BROWNING SCREW Lube Method in Housing in Outer Race
The Browning set screw Ball Grade 10 10
has precision ground
threads and a diamond Lithium Complex Lithium Complex
Grease NLGI #2 NLGI #2
faceted point. This anchors
the shaft to the bearing for Housing Base Semi-Solid Semi-Solid
superior shaft hold and
minimal set screw back out. Other Locks Eccentric/BOA Eccentric/D-LOK
Available
DIAMOND Ballpath Finishing Honed Honed

Based on 1 7/16” normal duty set screw pillow blocks.
BROWNING
HOUSING
The rugged semi-solid base
design provides an
excellent mounting
foundation. This is integral
to prevent sheet metal
“buckling.”
Ball and Roller Bearing Interchange Tables Pg 166
BMB-07 Roller.pmd 159 5/21/2007, 6:32 AM

Bearings
PRODUCT COMPARISON
FAFNIR FEATURES
Set Screw
Browning
Eccentric
BOA™
Concentric Set Screw
Fafnir
Eccentric
FAFNIR 90° LOCKING
VPS VPE VPB YAS/RASC RAS
VPLS VPLE VPLB YAK RAK
VTBS VTBE VTBB - -
- - - - -
- - - - -
VF2S VF2E VF2B YCJT/RCJTC RCJT
VF4S VF4E VF4B YCJ/RCJC RCJ
- - - - -
VFBS - VFBB - -
- - - - -
VTWS
-
VTWE
-
-
-
YTU
-
RTU
-
FAFNIR
-
-
-
-
-
-
-
-
-
RCH
ANTI-ROTATION
VS VE VB GY-KRRB G-KRRB
- - - - -
?
VER - - ER -
VPS - VPB - RAKH
VF2S - VF2B YCJTM -
VF4S - VF4B YCJM -
VFCS - VFCB - -
FAFNIR SEAL
VTWS - VTWB - -
- - - - -
- - - - -
VS - VB - G-KRRB
VPS VPE - SAS VAS
VPLS VPLE - - VAK
- - - - -
VF2S VF2E - SCJT VCJT
VF4S VF4E - SCJ VC J
VTWS VTWE - - VTU
- - - - -
VPS-M VPE-M - - -
FAFNIR HOUSING
VF2S-M VF2E-M - GVFTD/GRFTD
VF3S-M VF3E-M - - GVRFD/GVFDR
SSPS SSPE - - PB
SSF2S SSF2E - - RAT
SSF3S SSF3E - - RA/RR
SSF4S SSF4E - - RR
SSF3TS SSF3TE - - RATR
SSRPS SSRPE - - RPB
RUBRS RUBRE RUBRB - RCSM
SLS SLE - - GRA-RR
LS LE - - -
VS VE - GYA-RRB GRA-RRB
FAFNIR HARDENING
Browning vs. Fafnir
HEAD-TO-HEAD...
...AND WINNING
BMB-07 Roller.pmd 160 5/21/2007, 6:32 AM

BROWNING FEATURES
Browning vs. Fafnir
HEAD-TO-HEAD...
locking provides a
...AND WINNING
BOA™ page 52.
BROWNING ANTI-ROTATION FEATURE COMPARISON

The Browning anti-rotation
rivet prevents outer ring Browning FAFNIR
creep or rotation within the
housing. This reduces heat Inner Length 1.6875 1.6875
buildup and prolongs useful Inner Hardening Zone Hardening Case Carburized
bearing life.
Precision Standard Cup
Set Screw Type Ground Diamond Point
Faceted
BROWNING SEAL Sealing Single Lip Single Lip Contact
The Browning shielded Contact
single lip contact seal is
proven as an effective
Flinger Yes No
barrier to reduce Retainer Type Ball Riding Ball Riding
contamination. The auxiliary
flinger is a value added Retainer Material Nylon Nylon
extra. The flinger “slings”
debris away from the sealing Outer Width 0.748 0.748
area as it spins with the inner
ring to increase seal life. Anti-Rotation Rivet in Outer None
BROWNING HOUSING
Grease Groove Grease Groove
Lube Method in Housing in Housing
The rugged, semi solid base Ball Grade 10 10
design provides an excellent
Lithium Complex
mounting foundation. This is Grease NLGI #2
Polyurea
integral to help prevent
sheet metal “buckling.” Housing Base Semi-Solid Hollow
Other Locks Eccentric/BOA™ Eccentric
Available
Ballpath Finishing Honed Honed
BROWNING HARDENING Based on 1 7/16” normal duty set screw pillow blocks.
The Browning inner ring

zone hardening creates a
hard ballpath to maximize
steel integrity. The inner ring
extensions remain softer to
allow for post heat treat
drilling and tapping where
set screw holes do not
distort. The softer steel
mates closely to the
inimitable precision ground Ball and Roller Bearing Interchange Tables Pg 166
set screws.
BMB-07 Roller.pmd 161 5/21/2007, 6:32 AM

Bearings
PRODUCT COMPARISON MB FEATURES
Browning BOA™ MB
Set Screw Eccentric
200 Series
Concentric Set Screw Eccentric
200 Series
Concentric MB 45° LOCKING
VPS VPE VPB - - KC-45
VPLS VPLE VPLB - - KCL-45
VTBS VTBE VTBB TBC-25 - -
- - - - - -
- - - - - -
VF2S VF2E VF2B - - -
VF4S VF4E VF4B - - -
- - - - - -
VFBS - VFBB MFB - -
- - - - - -
MB INNER
VTWS VTWE - - - -
- - - - - -
- - - - - -
- - - - - -
VS VE VB MB-25 - KMB-25/KMB-45
EXP-VS EXP-VE EXP-VB - - -
VER - - ER - -
VPS - VPB C-35 - KC-55
VF2S - VF2B FC2-35 - KFC2-35/KFC2-55
VF4S - VF4B FC4-35 - KFC4-35/KFC4-55
VFCS - VFCB PFC4-35 - -
MB SEAL
VTWS - VTWB TC-35 - -
- - - - - -
- - - - - -
VS - VB MB-35 - KMB-35/KMB-55
VPS VPE - C-25 - -
VPLS VPLE - CL-25 - -
- - - - -
VF2S VF2E - FC2-25 - -
VF4S VF4E - FC4-25 - -
VTWS VTWE - TC-25 - -
- - - - - -
VPS-M VPE-M - - - -
VF2S-M
VF3S-M
VF2E-M
VF3E-M
-
-
-
-
-
-
-
-
MB SCREW
SSPS SSPE - PS - -
SSF2S SSF2E - FPS2 - -
SSF3S SSF3E - FPS3 - -
SSF4S SSF4E - TFPS3 - -
SSF3TS SSF3TE - - - -
SSRPS SSRPE - - - -
RUBRS RUBRE RUBRB RER - -
SLS SLE - MSL/MSLN - -
INTERNALLY KNURLED
LS LE - - - -
VS VE - MB-25 - -
NOTE: CHECK LENGTH-THRU-BORE FOR MB 25 SERIES
(BETWEEN 100 & 200)
MB HARDENING
Browning vs. MB
HEAD-TO-HEAD...
...AND WINNING
BMB-07 Roller.pmd 162 5/21/2007, 6:32 AM

BROWNING FEATURES

Browning vs. MB
HEAD-TO-HEAD...
locking provides a
...AND WINNING
BOA™ page 52.
BROWNING INNER FEATURE COMPARISON

Browning’s wider inner ring
contributes to higher shaft Browning MB
stability, quieter operation
and reduced vibration. Inner Length 1.6875 1.5625
Inner Hardening Zone Hardening Case Carburized
Precision
Set Screw Type Ground Diamond Internally Knurled
Faceted
BROWNING SEAL Sealing Single Lip Unshielded Single
The Browning shielded Contact Lip Contact
proven as an effective Flinger Yes Yes
barrier to reduce
Retainer Type Ball Riding Ball Riding
contamination. The auxiliary
flinger is a value added Retainer Material Nylon Metal
extra. The flinger “slings”
debris away from the sealing Outer Width 0.748 0.766
area as it spins with the inner
ring to increase seal life. Anti-Rotation Rivet in Outer Rivet in Outer
BROWNING SCREW Lube Method Grease Groove

in Housing
Grease Groove
in Housing
The Browning set screw
Ball Grade 10 10
threads and a diamond Lithium Complex
Grease NLGI #2
Lithium Base
the shaft to the bearing for
Housing Base Semi-Solid Solid
minimal set screw back-out. Other Locks Eccentric/BOA™ Centrik Lok
Available
DIAMOND Ballpath Finishing Honed Honed
BROWNING HARDENING
Based on 1 7/16” normal duty set screw pillow blocks (MB-25 series).
The Browning inner ring

zone hardening creates a
hard ballpath to maximize
steel integrity. The inner ring
extensions remain softer to
allow for post heat treat
drilling and tapping where
set screw holes do not
distort. The softer steel
mates closely to the
inimitable, precision ground Ball and Roller Bearing Interchange Tables Pg 166
set screws.
BMB-07 Roller.pmd 163 5/21/2007, 6:32 AM

Bearings
LINK-BELT FEATURES
PRODUCT COMPARISON LINK-BELT 90°
Browning BOA™ Link-Belt
Set Screw Eccentric Concentric Set Screw Eccentric
VPS VPE VPB P3-U200N P3-Y200N
VPLS VPLE VPLB PL3-U200N PL3-Y200N
VTBS VTBE VTBB - -
- - - - -
- - - - -
VF2S VF2E VF2B FX3-U200N FX3-Y200N
VF4S VF4E VF4B F3-U200N F3-Y200N
-
VFBS
-
-
-
VFBB
-
FB3-U200N
-
- LINK-BELT
-
VTWS
-
VTWE
-
-
-
TH3-U200N
-
-
ANTI-ROTATION
- - - - -
- - - - -
?
- - - - -
VS VE VB UG2B-NL YG2B-NL
- - - - -
VER - - -
VPS - VPB - -
LINK-BELT SEAL
VF2S - VF2B - -
VF4S - VF4B - -
VFCS - VFCB - -
VTWS - VTWB - -
- - VTNB - -
- - - - -
VS - VB - -
V PS VPE - P3-S200E* P3-W200U
VPLS VPLE - PL3-S200E PL3-W200U
- - - - -
VF2S VF2E - FX3-S200E FX3-W200U
VF4S VF4E - F3-S200E F3-W200U
VTWS
-
VTWE
-
-
-
-
-
-
-
LINK-BELT HOUSING
VPS-M VPE-M - - -
VF2S-M VF2E-M - FX-UG200N FX-YG200N
VF3S-M VF3E-M - F-UG200N** F-YG200N**
SSPS SSPE - - -
SSF2S SSF2E - MST MST
SSF3S SSF3E - MS*** MS***
SSF4S SSF4E - MSC*** MSC***
SSF3TS SSF3TE - MSTR*** MSTR***
SSRPS SSRPE - - -
RUBRS RUBRE RUBRB - -
SLS SLE - SB200EL WB200UL
LINK-BELT SCREW
LS LE - - W200UL
VS VE - SG-EL WG2B-UL
*SPRING LOCKING COLLAR
**3-BOLT ONLY
***BEARINGS NOT INCLUDED
Browning vs. Link-Belt

HEAD-TO-HEAD... INTERNALLY KNURLED
... AND WINNING
BMB-07 Roller.pmd 164 5/21/2007, 6:32 AM

BROWNING FEATURES
BROWNING 120° LOCKING Browning vs. Link-Belt
HEAD-TO-HEAD...
locking provides a
...AND WINNING
BOA™ page 52.
FEATURE COMPARISON
BROWNING Browning LINK-BELT
ANTI-ROTATION Inner Length 1.6875 1.766
The Browning anti-rotation
rivet prevents outer ring Inner Hardening Zone Hardened Zone Hardened
creep or rotation within the
housing. This reduces heat Set Screw Spacing 120° 90°
build up and prolongs use- Precision
ful bearing life. Set Screw Type Ground Diamond Internally Knurled
Faceted
Single Lip
BROWNING SEAL Sealing Single Lip Contact
Contact
The Browning shielded
Flinger Yes No
proven as an effective bar- Retainer Type Ball Riding Ball Riding
rier to reduce contamina-
tion. The auxiliary flinger is Retainer Material Nylon Polymeric
a value added extra. The
flinger “slings” debris away Outer Width 0.748 .669
from the sealing area as it
spins with the inner ring to
Anti-Rotation Rivet in Outer None
increase seal life. Grease Groove Grease Groove
Lube Method in Housing in Housing
BROWNING HOUSING Ball Grade 10 10
The rugged semi-solid base
design provides an Lithium Complex Lithium Complex
excellent mounting
Grease NLGI #2 NLGI #2
foundation. This is integral
to help prevent sheet metal
Housing Base Semi-Solid Hollow
“buckling.” Other Locks Eccentric/BOA™ Eccentric
Available
Ballpath Finishing Honed Honed
Based on 1 7/16” normal duty set screw pillow blocks.
BROWNING SCREW
The Browning set screw
threads and a diamond
the shaft to the bearing for
minimal set screw back-out.
DIAMOND Ball and Roller Bearing Interchange Tables Pg 166
BMB-07 Roller.pmd 165 5/21/2007, 6:32 AM

Catalogo Brownings General

Uploaded by

Copyright:

Available Formats

Catalogo Brownings General

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Catalogo Brownings General

Uploaded by

Copyright:

Available Formats

Roller Bearing Family of Products

BROWNING offers a broad and complete line

100 See page 156 for trademark acknowledgments.

BMB-07 Roller.pmd 100 5/21/2007, 6:31 AM

ROLLER BEARING CONTENTS

TAPERED ROLLER BEARINGS

SPHERICAL ROLLER BEARINGS

BALL & ROLLER BEARING INTERCHANGE TABLES ........ 166

See page 156 for trademark acknowledgments. 101

BMB-07 Roller.pmd 101 5/21/2007, 6:31 AM

Dimensionally Tapered Roller Bearings

One Piece Ductile

BMB-07 Roller.pmd 102 5/21/2007, 6:31 AM

E920 SETSCREW LOCK HOUSING

900 SEALS - CENTRAP labyrinth seals contain an angled

PBE920 Pillow Blocks ......... 110

See page 156 for trademark acknowledgments. 103

BMB-07 Roller.pmd 103 5/21/2007, 6:31 AM

Load Rating Tables: Page 114 Dimensional Interchange

104 See page 156 for trademark acknowledgments.

BMB-07 Roller.pmd 104 5/21/2007, 6:31 AM

Dimensional Interchange Load Rating Tables: Page 114

See page 156 for trademark acknowledgments. 105

BMB-07 Roller.pmd 105 5/21/2007, 6:31 AM

Load Rating Tables: Page 114 Dimensional Interchange

106 See page 156 for trademark acknowledgments.

BMB-07 Roller.pmd 106 5/21/2007, 6:32 AM

Housing S PB T S 22 500 X 2 7/16”

BMB-07 Roller.pmd 107 5/21/2007, 6:32 AM

Load Rating Tables: Page 114

108 See page 156 for trademark acknowledgments.

BMB-07 Roller.pmd 108 5/21/2007, 6:32 AM

Adjustment* Dimensions In Inches

See page 156 for trademark acknowledgments. 109

BMB-07 Roller.pmd 109 5/21/2007, 6:32 AM

PBE920 Tapered Roller Bearings

110 See page 156 for trademark acknowledgments.

BMB-07 Roller.pmd 110 5/21/2007, 6:32 AM

See page 156 for trademark acknowledgments. 111

BMB-07 Roller.pmd 111 5/21/2007, 6:32 AM

112 See page 156 for trademark acknowledgments.

BMB-07 Roller.pmd 112 5/21/2007, 6:32 AM

SHAFT FRAME Adjustment* Dimensions In Inches Bolts Req'd

BMB-07 Roller.pmd 113 5/21/2007, 6:32 AM

Match Bore Size

BMB-07 Roller.pmd 114 5/21/2007, 6:32 AM

Match Bore Size

See page 156 for trademark acknowledgments. 115

BMB-07 Roller.pmd 115 5/21/2007, 6:32 AM

116 See page 156 for trademark acknowledgments.

BMB-07 Roller.pmd 116 5/21/2007, 6:32 AM

Browning 950/970 Series ductile

BMB-07 Roller.pmd 117 5/21/2007, 6:32 AM

Expansion and Non-Expansion

118 See page 156 for trademark acknowledgments.

BMB-07 Roller.pmd 118 5/21/2007, 6:32 AM

Expansion and Non-Expansion

SHAFT Dimensions In Inches UNIT

BMB-07 Roller.pmd 119 5/21/2007, 6:32 AM