Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 89 views

    Mod. Ct/Ev Mod. Ctc/Ev: Cooling Tower Apparatus

    Uploaded by

    essam ess
    This document describes a cooling tower apparatus that consists of a transparent packed tower. Water is pumped to the top of the tower and distributed over the packing before being collected at the bottom. Air is blown through the tower by a fan to cool the water through evaporation. Sensors measure parameters like temperature and pressure throughout the process. The equipment is used to study fluid dynamics, operational parameters, and cooling performance under different conditions.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Mod. Ct/Ev Mod. Ctc/Ev: Cooling Tower Apparatus

    Uploaded by

    essam ess
    89 views4 pages
    This document describes a cooling tower apparatus that consists of a transparent packed tower. Water is pumped to the top of the tower and distributed over the packing before being collected at the bottom. Air is blown through the tower by a fan to cool the water through evaporation. Sensors measure parameters like temperature and pressure throughout the process. The equipment is used to study fluid dynamics, operational parameters, and cooling performance under different conditions.

    Original Title

    Item 456 ( 70-1)CT-24B-E-EV-1

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document describes a cooling tower apparatus that consists of a transparent packed tower. Water is pumped to the top of the tower and distributed over the packing before being collected at the bottom. Air is blown through the tower by a fan to cool the water through evaporation. Sensors measure parameters like temperature and pressure throughout the process. The equipment is used to study fluid dynamics, operational parameters, and cooling performance under different conditions.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    89 views4 pages

    Mod. Ct/Ev Mod. Ctc/Ev: Cooling Tower Apparatus

    Uploaded by

    essam ess
    This document describes a cooling tower apparatus that consists of a transparent packed tower. Water is pumped to the top of the tower and distributed over the packing before being collected at the bottom. Air is blown through the tower by a fan to cool the water through evaporation. Sensors measure parameters like temperature and pressure throughout the process. The equipment is used to study fluid dynamics, operational parameters, and cooling performance under different conditions.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 4

    COOLING TOWER APPARATUS

    EV
    Mod. CT/EV manual
    Mod. CTc/EV manual with data logging

    INTRODUCTION
    This equipment has been designed to experience with the
    construction principles and operational characteristics of
    cooling towers and it mainly consists of a packed tower of
    transparent metacrylate.

    The water heated in a tank is pumped to the top of the tower


    and its flow rate is measured by a variable area flowmeter; then
    the water is distributed onto the packing uniformly to avoid any
    “channeling” phenomenon.
    CHEMICAL ENGINEERING

    The cooled water is collected at the tower bottom and then it


    is sent again to the heated tank.
    An additional tank will keep the level of heated tank constant
    compensating the water lost by evaporation.

    A forced air flow is blown by a centrifugal fan onto the column


    bottom; the flow rate of air can be controlled by an air lock and
    measured by a diaphragm at the column top.
    After leaving the packing, the air will cross a demister.

    The heated tank is equipped with 3 electric heaters and with a


    safety thermostat.
    Process temperatures are measured by digital thermometers;
    a differential pressure gauge will measure the pressure drops
    on the packing and on the diaphragm.

    TRAINING PROGRAM
    This unit enables to deepen
    the following issues:
    • Fluodynamics of different packings with different flow rates
    of air and water
    • Measurement of operational parameters in steady-state
    conditions
    • Representation of the state of the system on psychrometric
    chart and energy balance
    • Effect of the packing surface on the approach to wet bulb
    and on the pressure drops
    • Performance with different cooling loads and inlet
    24B-E-EV-CT-1

    temperatures

    ELETTRONICA VENETA S.P.A. - 31045 Motta di Livenza (TV) Italy - Via Postumia 16 - Tel. +39 0422 765 802 - Fax +39 0422 861 901 - E-mail: export@elettronicaveneta.com EV 14
    TECHNICAL SPECIFICATIONS:
    • Rectangular tower of Plexiglas; height of 550 mm
    EV

    • 3 packings of different specific surface (92, 131 and


    235 m2/m3) being included in the tower and easily
    interchangeable
    • Additional water tank of Plexiglas, with capacity of 1 litre
    • Centrifugal fan, with max. flow rate of 1340 m3/h and
    maximum head of 80 mmH2O
    • Tank of AISI 304 stainless steel for hot water, with capacity
    of 9 litres and 3 electric heaters of 500 W
    • Pump for water, Qmax = 3 m3/h, Hmax = 5 m H2O
    • Switchboard IP55, complying with EC standards and
    including digital thermostat, fan controls, resistors
    and ELCB

    Power supply: 230 Vac 50 Hz single-phase - 2,6 kVA


    (Other voltage and frequency on request)
    Dimensions: 100 × 650 × 1400 mm
    Weight: 72 kg
    CHEMICAL ENGINEERING

    For Mod. CT/EV only


    • 6 digital thermometers with Liquid-Crystal Display (LCD)
    • Flowmeter, with range of 20-200 l/h
    • Inclined manometer, with range of 0-60 mm H2O

    For Mod. CTc/EV only


    • 4 thermoresistances Pt100 with sheath of AISI 304
    stainless steel
    • 2 digital thermohygrometers
    • Flowmeter with transmitter
    • Electronic transmitter of differential pressure
    • Interface for the connection with a PC included in the
    switchboard
    • Data acquisition software for Windows

    REQUIRED
    UTILITIES (PROVIDED BY THE CUSTOMER)
    • Distilled water: 10 litres + 2 l/h

    ACCESSORIES (NOT INCLUDED)


    • Personal Computer running Windows
    (for mod. CTc/EV only)
    24B-E-EV-CT-1

    SUPPLIED WITH
    THEORETICAL – EXPERIMENTAL
    HANDBOOK

    EV 15 ELETTRONICA VENETA S.P.A. - 31045 Motta di Livenza (TV) Italy - Via Postumia 16 - Tel. +39 0422 765 802 - Fax +39 0422 861 901 - E-mail: export@elettronicaveneta.com

    You might also like