Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 81 views

    Hyundai Welding Co., LTD

    Uploaded by

    Gerry Dan Chanliongco
    1. ST-308L is an extra-low carbon stainless steel filler rod for TIG welding with pure argon gas. 2. It is designed for welding 18% Cr-8% Ni stainless steel and produces a weld metal with ferrite that gives it excellent crack resistance. 3. The weld bead and weldability are good and it has extremely excellent corrosion resistance and resistance to intergranular corrosion.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Hyundai Welding Co., LTD

    Uploaded by

    Gerry Dan Chanliongco
    81 views4 pages
    1. ST-308L is an extra-low carbon stainless steel filler rod for TIG welding with pure argon gas. 2. It is designed for welding 18% Cr-8% Ni stainless steel and produces a weld metal with ferrite that gives it excellent crack resistance. 3. The weld bead and weldability are good and it has extremely excellent corrosion resistance and resistance to intergranular corrosion.

    Original Title

    ST-308L

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    1. ST-308L is an extra-low carbon stainless steel filler rod for TIG welding with pure argon gas. 2. It is designed for welding 18% Cr-8% Ni stainless steel and produces a weld metal with ferrite that gives it excellent crack resistance. 3. The weld bead and weldability are good and it has extremely excellent corrosion resistance and resistance to intergranular corrosion.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    81 views4 pages

    Hyundai Welding Co., LTD

    Uploaded by

    Gerry Dan Chanliongco
    1. ST-308L is an extra-low carbon stainless steel filler rod for TIG welding with pure argon gas. 2. It is designed for welding 18% Cr-8% Ni stainless steel and produces a weld metal with ferrite that gives it excellent crack resistance. 3. The weld bead and weldability are good and it has extremely excellent corrosion resistance and resistance to intergranular corrosion.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 4

    Rev.

    00

    ST-308L

    HYUNDAI WELDING CO., LTD.


    ST-308L

    AWS A5.9 ER308L


     Specification
    JIS Z3321 YS308L

    EN ISO 14343-A W 19 9 L

     Applications ST-308L is designed for welding of extra-low carbon 18% Cr-8% Ni


    And 18% Cr-8% Ni stainless steel.

     Characteristics 1.SM-308L is a filler rod for TIG welding with pure Ar gas.
    on Usage
    2. As the weld metal contains ferrite, its crack resistibility is excellent.
    3. Both its bead appearance and weldability are good.
    4. The corrosion resistibility and intergranular corrosion, resistibility
    are extremely excellent. Furthermore, resistance to corrosion and
    mechanical properties are good.

     Note on Usage Use 100% Ar gas

     Packing Size(mm) 1.2 1.6 2.0 2.4 3.2


    Length(mm) 1000
    ST-308L
    Mechanical Properties
    & Chemical Composition of All Weld Metal

     Welding Conditions Method by AWS Spec.

    Groove angle = 45˚


    Diameter(mm) : 2.4mm

    Shielding Gas : 100% Ar

    Flow Rate(ℓ /min.) : 20~25


    12mm
    Amp./ Volt. : 160~240

    Pre-Heat(℃) : R.T .
    5mm Interpass Temp.(℃) : 150±15

    6.5mm Polarity : DC(-)

    [ Joint Preparation & Layer Details ]

     Mechanical Properties of All weld metal

    CVN Impact test


    Consumable Tensile Test
    (Joule)

    TS(MPa) El(%) 0℃ -196℃


    ST-308L
    632.1 53.6 126 46.7

     Chemical Analysis of the wire(wt%)

    Shielding Chemical Composition (%)


    Consumable
    Gas C Si Mn P S Ni Cr Mo Cu

    ST-308L 100% Ar 0.026 0.37 1.85 0.024 0.013 9.69 20.40 0.20 0.21

    AWS A5.9 0.30~ 1.0~ 9.0~ 19.5~


    ≤0.03 ≤0.03 ≤0.03 ≤0.75 ≤0.75
    ER308L 0.65 2.5 11.0 22.0

    This information is provided solely for the purpose of confirming product conformance with applicable standards. The serviceability of a product or
    structure utilizing this type of information is and must be the sole responsibility of the builder/user. Many variables beyond the control of HYUNDAI
    WELDING CO., LTD. affect the results obtained in applying this type of information. These variables include, but are not limited to, welding procedure,
    shielding gas, plate chemistry and temperature, weldment design, fabrication methods and service requirements.
    ST-308L
    Mechanical Properties
    & Chemical Composition of All Weld Metal

     δ – Ferrite No.

    Diagram FERITSCOPE MP-30 *


    Consumable Shielding Gas
    Schaeffler Delong WRC(1992) (FISCHER)

    ST-308L 100% Ar 10.3 11.4 12.6 8.5

    This information is provided solely for the purpose of confirming product conformance with applicable standards. The serviceability of a product or
    structure utilizing this type of information is and must be the sole responsibility of the builder/user. Many variables beyond the control of HYUNDAI
    WELDING CO., LTD. affect the results obtained in applying this type of information. These variables include, but are not limited to, welding procedure,
    shielding gas, plate chemistry and temperature, weldment design, fabrication methods and service requirements.

    You might also like