Environmental Profile Sheet

The imageRUNNER ADVANCE 6575i/6565i/6555i models incorporate Canon technologies,

each with a strong environmental focus at every stage of the product life cycle–Produce, Use,
and Recycle. These technologies, which focus on Energy Conservation, Resource Conservation,
and Pollution Prevention, form the foundation of Canon’s Environmental Management System.

Energy Resource Pollution

Conservation Conservation Prevention
In order to help reduce dependence on petroleum-based materials, Canon uses
100% recycled plastics* and bio-based plastics on certain exterior parts.
A variety of sleep recovery triggers, including motion sensing, help
encourage the use of Sleep Mode, which minimizes power consumption.
Power consumption in Sleep Mode is as low as 0.90 W!
Low Typical Electricity Consumption (TEC) values, which measure power consumption
during a one-week period.
Power consumption is reduced by utilizing White LED array technology in its
Color Image Reader versus using a traditional Xenon tube!
Induction Heating (IH) technologies help reduce power consumption and limit the
warm-up period.
pO Toner with a low melting point helps reduce fusing temperature requirements.
All suppliers are required to meet Canon’s stringent Green Procurement policy and
environmental terms. This helps Canon exceed the tough European Union’s RoHS Directive,
which controls/restricts the use of certain hazardous substances.
Each system is equipped with paper-, toner-, and energy-saving features that help to
cut costs and conserve resources.
Long-life parts and high-yield supplies help maximize uptime and help reduce the
amount of materials consumed during the product life cycle.

Canon. The Natural

Partner for Business.

* Excluding a small amount of additives to improve physical properties.

 Environment-Related Specifications

System Type Dimensions (W x D x H)
Monochrome Laser Multifunctional 26-3/8” x 30-5/8” x 48”
(670 mm x 779 mm x 1220 mm)
Functions
Standard: Print (UFR II, PCL® 6, Installation Space (W x D)
Adobe® PostScript® 3™), Basic (Stack Bypass Extended + Cassette Drawers open +
Copy, Scan, Send, Store Copy Tray): 60-3/8” x 53-1/4” (1533 mm x 1353 mm)
Optional: Fax (Up to 4 lines) Fully Configured (Booklet Finisher + Paper Deck + Insertion
and Folding Unit + Puncher Unit + Cassette Drawers open):
Operation Panel
94-3/4” x 53-1/4” (2407 mm x 1353 mm)
Standard: 10.1” TFT LCD WSVGA
Color Flat-panel
Weight
Approx. 515.9 lb. (234 kg)*
Optional: 10.4” TFT LCD SVGA
Color Upright-panel Noise Levels
Warm-up Time Standby: 58 dB or Less
From Power On: 30 Seconds Copying/Printing: 75 dB or Less
From Sleep Mode: 30 Seconds Recycled Content
Power Requirements 120 V AC, 60 Hz, 16 A Recycled Primary Package (%)** Approx. 20%

Power Consumption Post-consumer Waste:*** 0.8%

Maximum: 2,100 W Secondary Waste Materials: ✝

0.0%

Sleep Mode: 0.90 W or Less Recycled PETE Product:✝ ✝ 0.0%

Copying/Printing: 1,395.9 W Recycled Paper Support

Copy Ready (Standby): 237 W 100% Post-consumer Content: Yes
Plug-in Environmental Standards Compliance
Quick Startup Mode “OFF”: 0.30 W ENERGY STAR® Certified
Quick Startup Mode “ON”: 0.45 W EPEAT® Gold
One Week TEC EU RoHS Compliant===
6575i: 6.3 kWh Ecomark▲
6565i: 5.8 kWh Blue Angel===
6555i: 5.2 kWh Environment-conscious Features
One Year TEC Two-sided, Copy Sample, Confirmation/Cancel, Image Combination,
ID Card Copy, Secured Print, Job Forwarding, Department ID
6575i: 327.6 kWh
Management, Access Management System, Authentication
6565i: 301.6 kWh (Universal Login Manager), Standard Duplex Driver, Auto/Weekly
6555i: 270.4 kWh Sleep Timer, Auto/Weekly Shutdown Timer, Staple-Free Stapling

British Thermal Units (BTU)

* Including consumables.
Maximum (BTU/Hr.): 6,934 ** Percentage based on weight of recycled content.
*** The percentage of plastics the device contains that’s
Copying/Printing (BTU/Hr.): 4,763 derived from recycled plastic materials (by weight).
= The percentage of reused waste material.
Copy-Ready (Standby) (BTU/Hr.): 810 ==
The percentage of recycled PETE material.
===
This regulation is for the EU model product.
Plug NEMA 5-20 ▲
This regulation is for the Japanese model.

USA.CANON.COM/ENERGYSTAR

As an ENERGY STAR Partner, Canon U.S.A., Inc. has qualified these model as meeting the ENERGY
STAR energy efficiency criteria through an EPA recognized certification body. ENERGY STAR and
the ENERGY STAR mark are registered U.S. marks. PostScript® 3™ is either a registered trademark
or trademark of Adobe Systems Incorporated in the United States and/or other countries. PCL
6 is a trademark of Hewlett Packard Company. Canon, imageRUNNER, and the GENUINE logo are
registered trademarks of Canon Inc. in the United States and may also be registered trademarks
or trademarks in other countries. All other referenced product names and marks are trademarks
of their respective owners. Specifications and availability subject to change without notice. Not
responsible for typographical errors.
©2017 Canon U.S.A., Inc. All rights reserved.

0517R1-6500SRSEPS-PDF-IH