Catalogue Complet en

E IN FRA
AD
M
NC
E
FA B R I C
SE
AI
TI
Ç
A
ON FRAN
PRODUCT CATALOG
AIRCRAFT WARNING LIGHTS
& AIRFIELD EQUIPMENT
DELTA BOX | PRODUCT CATALOG |
Summary
OVERVIEW OF DELTA BOX PRODUCT RANGE 4
COMPANY PROFILE 8
OBSTRUCTION LIGHTING & NAVIGATION AIDS TO WARN OBSTACLE 12
ICAO RECOMMANDATIONS (ANNEX 14, CHAPTER 6) 14
LOW INTENSITY LIGHTS 18

LOW INTENSITY LIGHT TYPE A 18
LOW INTENSITY LIGHT TYPE B 20
LOW INTENSITY LIGHT TYPE A (TWINY) AND TYPE B (TWINY) 22
SOLAR LOW INTENSITY LIGHT TYPE A 24
SOLAR LOW INTENSITY LIGHT TYPE B 26
EXPLOSION PROOF LOW INTENSITY LIGHT 28
6.6A LOW INTENSITY LIGHT 30
INFRARED LOW INTENSITY LIGHT 31
MEDIUM INTENSITY LIGHTS 32

MEDIUM INTENSITY LIGHT TYPE A 32
MEDIUM INTENSITY LIGHT TYPE B 34
MEDIUM INTENSITY LIGHT TYPE C 36
MEDIUM INTENSITY LIGHT TYPE A&B 38
MEDIUM INTENSITY LIGHT TYPE A&C 40
EXPLOSION PROOF MEDIUM INTENSITY LIGHT TYPE B 42
INFRARED MEDIUM INTENSITY LIGHT TYPE B 44
INFRARED MODULE FOR MEDIUM INTENSITY LIGHTS 45
HIGH INTENSITY LIGHTS 46

HIGH INTENSITY LIGHT TYPE A 46
HIGH INTENSITY LIGHT TYPE B 48
POWER SUPPLY UNITS 50

CONTROL PANELS 50
SAFEBOX (UNINTERRUPTIBLE POWER SUPPLY) 52
NAVIGATION AIDS FOR HIGH VOLTAGE LINES 54

CONDUCTOR MARKING LIGHT (INDUCTION) 54
AIRCRAFT WARNING SPHERES 56
2
AIRPORT & HELIPADS EQUIPMENT 58
WIND DIRECTTION INDICATORS 60

ICAO (STNA) WIND DIRECTION INDICATORS 60
FAA WIND DIRECTION INDICATORS 62
SIMPLE WIND DIRECTION INDICATOR 64
WINDSOCKS FOR WIND DIRECTION INDICATOR 65
LED PRODUCTS FOR AIRFIELD LIGHTING 66

PORTABLE BEACONS FOR TEMPORARY & EMERGENCY WARNING OF WORKS AREAS 66
TRONCATED CONES AND DIHEDRAL BEACONS FOR UNPAVED AIRPORTS 68
RUNWAY & TAXIWAY EDGE BEACONS 68
LED PRODUCTS FOR HELIPADS & HELIDECKS 69

FATO & TLOF LIGHTS 69
MORSE CODE BEACON (H BEACON) 70
FLOODLIGHT FOR INFRASTRUCTURE LIGHTING 71
PILOT CONTROL LIGHTING UNIT FOR DISTANCE MONITORING 72
3
CONTROL PANELS & SAFEBOX
Control Panel Page Input Output Maximum Number of Lights
AAMB-10AF-75W 50 230V 48V 25 LBIA or 12 LBIB or 1LMIB/C
AAMB-10AF-500W 50 230V 48V 160 LBIA or 80 LBIB or 1LMIA or 6LMIB/C
AAMB-10AF-1000W 50 230V 48V 3 LMIA or 3LMIAB or 12 LMIB/C
AAMM-10AF 50 230V 230V TO BE DETERMINED ACCORDING TO THE INSTALLATION
AA-A400CO48-10AF 50 400V 48V 1 LMIA or 1 LMIAB or 6 LMIB or C
SAFEBOX Number of batteries Battery

Page Input / Output Maximum Number of Lights
(Power Supply Cabinet + 12 hours back-up) 12V capacity
SBMCBI4-10 52 230V/48V 4 7Ah 10 LBIA or 4 LBIB
SBMCBI8-20 52 230V/48V 4 12Ah 20 LBIA or 8 LBIB
SBMCMI1 52 230V/48V 4 24Ah 1 LMIA or 4 SMIB
SBMMMI1 52 230V/230V 4 24Ah 1 LMIA or 4 SMIB
OBSTRUCTION LIGHTS
Horizontal
References Luminous Intensity Power Supply Version Available options
Beam Spread
Dry
Low Intensity Lights Page Type A: 10 cd Type B: 32 cd 12V 24V 48V 230V Solar Simple Twiny Atex 360° 180° Photocell
Contact
LBIA00CC 18 • • • • •
LBIA01AC 18 • • •
LBIA11AC 18 • • •
LBIA01BC 18 • • •
LBIA11BC 18 • • •
LBIA00MC 18 • • •
LBIA01MC 18 • • •
LBIA11MC 18 • • •
LBIATWCB 22 • • •
LBIATWMB 22 • • •
SOLBIA10C 24 • • •
SOLBIA11C 24 • • •
SOLBIATW 24 • • •
LBIA00CX 28 • • • • • •
LBIA11BX 28 • • • •
LBIA00MX 28 • • • •
LBIA11MX 28 • • • •
LBIB00DC 20 • • • •
LBIB01AC 20 • • •
LBIB11AC 20 • • •
LBIB01BC 20 • • •
LBIB11BC 20 • • •
LBIB00MC 20 • • •
LBIB01MC 20 • • •
LBIB11MC 20 • • •
LBIBTWCB 22 • • •
LBIBTWMB 22 • • •
4
OBSTRUCTION LIGHTS
Horizontal
References Luminous Intensity Power Supply Version Available options
Beam Spread
Dry
Low Intensity Lights Page Type A: 10 cd Type B: 32 cd 12V 24V 48V 230V Solar Simple Twiny Atex 360° 180° Photocell
Contact
SOLBIB10C 26 • • •
SOLBIB11C 26 • • •
SOLBIBTWC 28 • • •
LBIB00BX 28 • • • •
LBIB11BX 28 • • • •
LBIB00MX 28 • • • •
LBIB11MX 28 • • • •
Dry
Medium Intensity Lights Page Day: 20 000cd Night: 2 000cd 12V 24V 48V 230V Solar Simple Twiny Atex 360° 180° Photocell
Contact
LMIA01BB 32 • • •
LMIA11BB 32 • • •
LMIA01MB 32 • • •
LMIA11MB 32 • • •
LMIA01BB-180° 32 • • •
LMIA11BB-180° 32 • • •
LMIA01MB-180° 32 • • •
LMIA11MB-180° 32 • • •
SMIB01AB 34 • • •
SMIB11AB 34 • • •
SMIB01BB 34 • • •
SMIB11BB 34 • • •
SMIB01MB 34 • • •
SMIB11MB 34 • • •
SMIB01AX 42 • • • •
SMIB11AX 42 • • • •
SMIB01BX 42 • • • •
SMIB11BX 42 • • • •
SMIB11MX 42 • • • •
LMIC01BB 36 • • •
LMIC11BB 36 • • •
LMIC01MB 36 • • •
LMIC11MB 36 • • •
LMIC01BB-180° 36 • • •
LMIC11BB-180° 36 • • •
LMIC01MB-180° 36 • • •
LMIC11MB-180° 36 • • •
LMIAB01BB 38 • • •
LMIAB11BB 38 • • •
LMIAB01MB 38 • • •
LMIAB11MB 38 • • •
LMIAB01BB-180° 38 • • •
LMIAB11BB-180° 38 • • •
LMIAB01MB-180° 38 • • •
LMIAB11MB-180° 38 • • •
LMIAC01BB 40 • • •
LMIAC11BB 40 • • •
LMIAC01MB 40 • • •
LMIAC11MB 40 • • •
Day: WHITE FLASH
Dry
High Intensity Lights Page Twilight: WHITE FLASH 12V 24V 48V 230V Solar Simple Twiny Atex 360° 120° Photocell
Contact
Night: WHITE FLASH
LHIA-TF 46 • • •
LHIB-TF 48 • • •
5
HIGH VOLTAGE LINES MARKING & SIGNALING RUNWAY BEACONS
Cable Diameter (in mm) Color Portable Beacon Page Color(s) Batteries
Conductor
Page
Marking Light BPLBIAR 66 Red 1 x 12V 7Ah
7 to 13 14 to 21 22 to 29 30 to 36 37 to 40 Red
BPLBIAB 66 White 1 x 12V 7Ah
LBIA00HT 54 • • • • •
BPLBIABL 66 Blue 1 x 12V 7Ah
LBIB00HT 54 • • • • • BPLBIAR&B (and) 66 Red and Blue 1 x 12V 7Ah
BPLBIAR/B (or) 66 Red or Blue 1 x 12V 7Ah

Cable Diameter (in mm) Color
Warning BPLBIAV 66 Green 1 x 12V 7Ah
Page
Spheres
10 to 15 15 to 20 20 to 26 26 to 29 31 to 33
BPLBIAR&V (and) 66 Red andGreen 1 x 12V 7Ah
WS60R-d07 56 • Red BPLBIAR/V (or) 66 Red or Green 1 x 12V 7Ah
WS60R-d12 56 • Red BPLBIAO 66 Orange 1 x 12V 7Ah
WS60R-d18 56 • Red Mini Portable Beacon
WS60R-d23 56 • Red BPMLBIAR1 66 Red 1 x 12V 1.2Ah
WS60R-d29 56 • Red BPMLBIAR2 66 Red 2 x 12V 1.2Ah
BPMLBIAW1 66 White 1 x 12V 1.2Ah

WS60W-d07 56 • White
BPMLBIAW2 66 White 2 x 12V 1.2Ah
BMPLBIAR/B1 66 Red and / or Blue 1 x 12V 1.2Ah
BPMLBIAR/B2 66 Red and / or Blue 2 x 12V 1.2Ah
BMPLBIARV1 66 Red and / or Green 1 x 12V 1.2Ah
BPMLBIARV2 66 Red and / or Green 2 x 12V 1.2Ah
WS60O-d07 56 • Orange
Truncated cones & dihedral beacons
WS60O-d12 56 • Orange
BPTRY 68 Yellow
WS60O-d18 56 • Orange BPTRW 68 White
WS60O-d23 56 • Orange BPDIEDRE 68 Red and White
WS60O-d29 56 • Orange BR-COMP 68 Orange
ICAO WIND DIRECTION INDICATORS (STNA)

Windvane Tiltable
References Mast Height Mast Color Preform Windsock Lighting Power Supply
Diameter option
Red & 60 90 100 Length Top-mast Windsock
STNA Masts Page 3m 4m 6m 7,40m Orange Inclued Inclued 230V 6.6A Solar
White cm cm cm in Cm beacon lighting
STNABG60 60
• • Option
•
STNABG60E2L 60
• • Option
• •
STNABG60E6L 60
• • Option
• •
STNABG60ESL 60
• • Option
• •
STNABG60C2L 60
• • Option
• 240
•
STNABG60C6L 60
• • Option
• 240
•
STNABG60CSL 60
• • Option
• 240
•
STNABG90 60
• • Option
•
STNABG90E2L 60
• • Option
• •
STNABG90E6L 60
• • Option
• •
STNABG90ESL 60
• • Option
• •
STNABG90C2L 60
• • Option
• 360
•
STNABG90C6L 60
• • Option
• 360
•
STNABG90CSL 60
• • Option
• 360
•
STNABG100 60
• • Option
•
STNABG100E2L 60
• • Option
• •
STNABG100E6L 60
• • Option
• •
STNABG100ESL 60
• • Option
• •
STNABG100C2L 60
• • Option
• 450
•
STNABG100C6L 60
• • Option
• 450
•
STNABG100CSL 60
• • Option
• 450
•
6
FAA WIND DIRECTION INDICATORS
References Mast Height Mast Color Windvane Diameter Preform Windsock Lighting Power Supply Tiltable Option
Top-mast Windsock
FAA MASTS Page 3m 6m Red & White Orange 45 60 90 Inclued Inclued beacon lighting
230V 6.6A Solar With
FAA3-BG45 62 • Option • •
FAA3-BG45-E2L 62 • Option • • •
FAA3-BG45-ESL 62 • Option • • •
FAA3-BG45-C2L 62 • Option • • •
FAA3-BG45-CSL 62 • Option • • •
SIMPLE WIND DIRECTION INDICATORS

WINDVANE TILTABLE
REFERENCES MAST HEIGHT MAST COLOR PREFORM WINDSOCK LIGHTING POWER SUPPLY
DIAMETER MAST
Length Top-mast Windsock
SIMPLE MASTS Page 3m 4m 6m 7,40m 30 40 50 With With 230V 6.6A Solar With
in Cm beacon ligthing
MASBG30 64 • White •
MASFG30 64 • White •
7
E IN FRA
AD
NC
THE COMPANY
COMPANY
E
FA B R I C
SE
AI
TI
Ç
A
ON FRAN
Delta-Box, the French manufacturer of aircraft warning lights, has been

supplying beaconing systems for over 25 years.
Part of the Indelec Group since 2004, leaders in the design & manufacture
of lightning protection systems; at Delta-Box we design and assemble
our full range of beaconing at our production facility in Douai, in the north
of France.
We manage in-house the development and production processes of our
aircraft warning systems and associated software, which in turn allows
us to innovate and propose alternative solutions.
All our products fully comply with the ICAO rules and are approved by
the French Civil Aviation Authority.
DELTA BOX IN NUMBERS :

• Innovative SME into a Group of 200 employees
• Production facility of 1,000 m2
• Annual sales of €3,000,000 of which 50% is export
• Present in more than 80 countries through a network of agents and distributors
• More than 7,000 beaconing units shipped to 5 continents each year
Delta-Box‘s key strengths are in its recognised know-how, its reactivity

and response to the technical and business needs of its clients.
8
DELTA BOX | PRODUCT CATALOG |
9
DELTA BOX | Catalogue 2019/2020 |
EXPORT MARKET
AN INTERNATIONAL
DIMENSION
50% Delivery A network
of global turnover in more than 80 countries of local dealers
Paris Airports
France
Reykjavik Airport HV Line

Island Berveslag Siberia
Norway
Solar station
Canada Ostanskinskaya Tower
Russia
Cristo de las Novas

Mexico
HV Line Marina Bay

Peru Singapor
Sidra Hospital
HV Line Qatar
Chili
Rades Bridge
Tunisia Heart of Doha
Qatar
Juventus Stadium Causeway bridge

Italia Kuweit
References
LEGENDE
Dealers
10
PERMANENT
INVESTMENT
IN RESEARCH
AND DEVELOPMENT DELTA BOX’s expertise in obstruction lighting
systems is the result of more than 25 years’
experience in development, manufacture and
installation of its products and from resolving on-
site and installation problems for its customers.
Pioneer in the use of LED technology, DELTA BOX

has its own research and development team, as
well as relationships with institutions involved in
applied research. This enables the company to
offer advanced state-of-the-art technology to its
clients.
Our commercial and technical departments work

together to provide customized solutions for each
project that take account of the speciﬁc conditions
and constraints.
In addition, we also provide broad expertise to
customers regarding:
• wireless data communication,
• autonomous and safety power supplies such as

battery, solar station, fuel cell…
• light-signaling devices,
• speciﬁc types of lighting.
SCOPES
OF APPLICATION
Airport Building Stack Structure
Wind Turbine Pylon HV Line Crane
11
OBSTRUCTION LIGHTING
& NAVIGATION AIDS TO
WARN OBSTACLES
12
13
THE INTERNATIONAL CIVIL AVIATION
ORGANISATION (ICAO)
RECOMMANDATIONS ON OBSTACLE WARNING
ANNEX 14 – CHAPTER 6 – 7TH EDITION, JULY 2016
GENERAL PRINCIPLES & RECOMMANDATIONS

i All obstacles as per ICAO definition should be marked and/or lighted.
i By day, the beaconing by lighting can replace the beaconing by marking.
i By night, all obstacles must be beaconed with warning lights

i The type of warning light depends on the size (height, width and length) and on the form of the object:
• Low Intensity Lights for obstacles below 45 meters

• Medium Intensity Lights for obstacles between 45 and 150 meters
• High Intensity Lights for obstacles above 150 meters

i The number and arrangements of low-, medium-, or high-intensity lights at each level to be marked shall be such that the object is indicated
from every angle in azimuth.
i Where a light is shielded in any direction by another part of the object that contributes to the definition of the obstacle, additional lights shall be
provided, in such way to retain the general definition of the object to be lighted.
OBSTACLE LOWER THAN 45M OBSTACLE BETWEEN 45M & 150M OBSTACLE ABOVE 150M
Beaconing by night only Beaconing by night only (with red & white marking) Beaconing day & night
(with red & white marking) Medium Intensity Ligths type B or C at the top and intermediate High Intensity Lights type B for transmission towers
Low Intensity Lights type A or B levels (if the obstacle is above 105m) High Intensity Lights type A for any other obstacle
+
Beaconing day & night Low Intensity Lights type B at intermediate levels
The maximum distance between each level of high
(without red & white marking) intensity lights must not exceed 105 meters. Above,
Medium Intensity Lights type A + Low Intensity type A or B Beaconing day & night (without red & white marking)
additional levels of lights are required.
Medium Intensity Lights type A, A&B or A&C at the top and
intermediate levels (if the obstacle is above 105m)
+
Low Intensity type B (except when Medium Intensity Lights
type A are used) at intermediate levels (if the obstacle is above
105m)
Peak Intensity (Cd) at given background luminance

Type of Light Color Type of signal
Day Twilight Night
(Above à 500 cd/m2) (50-500 cd/m2) (Below à 50 cd/m2)
Type A Red Steady - - 10
Low Intensity
Type B Red Steady - - 32
Type A White Flashing (20-60 fpm) 20 000 20 000 2 000
Medium Intensity Type B Red Flashing (20-60 fpm) - - 2 000
Type C Red Steady - - 2 000
Type A White Flashing (20-60 fpm) 200 000 20 000 2 000
High Intensity
Type B White Flashing (20-60 fpm) 100 000 20 000 2 000
14
Low Intensity Light type A or B High Intensity Light type A
(Type B mandatory for the beaconing of intermediary levels)
LEGENDE
Medium Intensity Light type A High Intensity Light type B
Medium Intensity Light type B Low Intensity Induction Light type A or B
Medium Intensity Light type A&B Aircraft Warning Sphere 600mm (orange, white or red)
Medium Intensity Light type A + Low Intensity Light type B
Medium Intensity Lights

type A&B if antenna > 12m
X1

FOR TELECOM PYLONS
Day X3
Night
X1 X1
105m max
X1 X1 X3
X2 / 180° X2 / 180°
X1
X1
X3
X3
105m max
X3
0 - 45m 45 - 105m 105 - 150m > 150m

FOR WIND TURBINES X2
X1
X3
0 - 150m 150 - 315m

15
FOR CRANES
X1
X1
X1 X1
X1 X1
X1 X1
X1 X1 X1 X1
X1 X1
X3 X3
X1 X1
X1 X1
X3/180° X3/180°
X3 X3
X3 X3
0 - 45m 45 - 105m 105 - 150m

FOR BUILDINGS
X3
105m max
X4/180° X4/180°
X4/180° X4/180°
X4 X4
X4
X4/180° X4
105m max
X4/180° X4/180°
X4 X4
X4 X4
0 - 45m 45 - 105m 105 - 150m > 150m
16
Low Intensity Light type A or B High Intensity Light type A
(Type B mandatory for the beaconing of intermediary levels)
LEGENDE
Medium Intensity Light type A High Intensity Light type B
Medium Intensity Light type B Low Intensity Induction Light type A or B
Medium Intensity Light type A&B Aircraft Warning Sphere 600mm (orange, white or red)
Medium Intensity Light type A + Low Intensity Light type B
AIRCRAFT WARNING LIGHTS X3
FOR INDUSTRIAL STACKS
105m max
X3 / 180°
X3 / 180°
X3
X3 / 180°
X3
105m max
X3 / 180°
0 - 45m 45 - 105m 105 - 150m 105 - 150m
WARNING LIGHTS & SPHERES

FOR HIGH VOLTAGE LINES
BEACONING OF THE CABLES BEACONING OF THE TOWER

m
30
m
30
X3
10 mn.
mi
70 mx. X3
ma
10 mn.
mi
X3
17
LOW INTENSITY OBSTRUCTION LIGHT
Type A
RED STEADY BURN – 10 CD NIGHT
01. DESCRIPTION
The LEDEO BIA is a low intensity light based on multi-LEDs technology.
Dedicated to a night beaconing (red steady burning), it is a long lifetime
beacon (100 000 hours), with a very low consumption (<2W). The LEDEO
BIA can be provided with a photocell for an automatic switch ON / OFF,
and a dry contact for failure alarm. It can be solar power supplied for areas
where it is difficult to bring power supply, and it is designed for an easy
installation.
02. ADVANTAGES
• Long life time > 10 years
• Multi-LEDs technology
• Low consumption < 2W
• Integrated photocell and dry contact (in option)
• DELTA BOX exclusive self-test when the photocell is integrated
• No maintenance
• 2-year warranty
03. APPLICATIONS
Rules concerning aircraft beaconing are established by the ICAO (Annex
14, Chapter 6). Low intensity beacons can be installed on structures up
to 45m in height. According to the rules, an uninterruptible power supply
cabinet has to be installed to insure a 12 hours beaconing in case of power
supply failure.
04. MODELS
REFERENCE VOLTAGE PHOTOCELL DRY CONTACT
LBIA00CC 12 to 48V DC Not included Not included
LBIA01AC 24V DC Not included Included
LBIA11AC 24V DC Included Included
LBIA01BC 48V DC Not included Included
LBIA11BC 48V DC Included Included
LBIA00MC 110-240V AC Not included Not included
LBIA01MC 110-240V AC Not included Included
LBIA11MC 110-240V AC Included Included
SCOPE OF APPLICATIONS Pylon Airport Building Stack

05. CHARACTERISTICS
DIMENSIONS
12, 24, 48V DC 240V AC
LUMINOUS
Luminous source Red LEDS
Horizontal / Vertical beam 360° / 10°
Luminous intensity > 10 Cd
MTBF 100 000 hours
ELECTRICAL
Voltage 12, 24, 48V DC 110 to 240V AC
Operating temperature -55°C to +55°C
Consumption < 2 Watts max.
Current Imax To 12V: l=200mA I < 10mA
To 24V: I=100mA
To 48V: I=50mA
Protection class IP66
Cable 2 meters
MECHANICAL
Body material Composite
Lens material Polycarbonate with bird spike Drilling
Mounting M6 screw (included)
Height / Width 170mm / 120mm
Screw spacing 50mm
Weight < 1 Kg WIRING
ENVIRONMENTAL
Humidity 100%
Frost -60°C
Wind speed 240 Km/h
CERTIFICATIONS
CE EN60947-1
CEI60364, NF C15-100
2014 / 35 / UE
OACI Annex 14, Volume I, Chapter 6
Quality ISO 9001 ; 2015
WARRANTY
Warranty period 2 years With dry contact Without dry contact
AVAILABLE VERSIONS
ZAMAC BOX ZAMAC BOX + UPS AVAILABLE ACCESSORIES FOR
INSTALLATION
Light mounted on a Light mounted on a
ZAMAC aluminum box, ZAMAC aluminum • Stainless steel mounting
with 2 adjustable arms box, with 2 adjustable
• Driving box
for more flexibility during arms for more flexibility
• Power supply
installation. Includes during installation, and
• Safety power supply
cable gland and terminal a battery kit for 12 hours
• Solar kit
block. of autonomy. Includes
cable gland and terminal
block.
HV Line Crane Structure Wind Turbine

Type B
01. DESCRIPTION
The LEDEO BIB is a low intensity light based on multi-LEDs technology.
Dedicated to a night beaconing (red steady burning), it is a long lifetime
beacon (100 000 hours), with a very low consumption (<6W). The LEDEO
BIB can be provided with a photocell for an automatic switch ON / OFF,
and a dry contact for failure alarm. It can be solar power supplied for areas
where it is difficult to bring power supply, and it is designed for an easy
installation.
02. ADVANTAGES
• No maintenance
• 2-year warranty
03. APPLICATIONS
to 45 meter in height. For structures > 45m, it is necessary to mark the
highest level with Medium Intensity light and to install at the intermediate
level the Low Intensity Type B. According to the rule, an uninterruptible
power supply cabinet has to be installed to insure a 12 hours beaconing in
case of power supply failure.
04. MODELS
LBIB00DC 24 to 48V DC Not included Not included
LBIB01AC 24V DC Not included Included
LBIB11AC 24V DC Included Included
LBIB01BC 48V DC Not included Included
LBIB11BC 48V DC Included Included
LBIB00MC 110-240V AC Not included Not included
LBIB01MC 110-240V AC Not included Included
LBIB11MC 110-240V AC Included Included
SCOPE OF APPLICATIONS Pylon

Airport Building Stack
05. CHARACTERISTICS
DIMENSIONS
24-48V DC 230V AC
LUMINOUS
MTBF 100 000 hours
ELECTRICAL
Voltage 24, 48V DC 110 to 240V AC
Consumption < 6 Watts max. ( Ø cutting )
Current Imax To 24V: I=220mA I < 23mA

To 48V: I=110mA
Cable 2 meters
MECHANICAL
Body material Aluminum
Lens material Polycarbonate with bird spike
Height / Width 245mm / 120mm Drilling
Screw spacing 50mm

Weight < 1,5 Kg
WIRING
ENVIRONMENTAL
Humidity 100%
Frost -60°C
Wind speed 240 Km/h
CERTIFICATIONS
CE EN60947-1
CEI60364, NF C15-100
2014 / 35 / UE
FAA Compliant FAA L-810
WARRANTY
Warranty period 2 years With dry contact Without dry contact
AVAILABLE VERSIONS AVAILABLE ACCESSORIES FOR

ZAMAC BOX ZAMAC BOX + UPS
INSTALLATION
Light mounted on a Light mounted on a • Stainless steel mounting

ZAMAC aluminum box, ZAMAC aluminum box, • Driving box
with 2 adjustable arms with 2 adjustable arms • Power supply
for more flexibility during for more flexibility during • Safety power supply
installation. Includes installation, and a battery
• Solar kit
cable gland and terminal kit for 12 hours of auton-
block. omy. Includes cable
gland and terminal block

TWINY AND DOUBLE
RED STEADY BURN – 10 CD NIGHT (TYPE A) OR 32 CD NIGHT (TYPE B)
01. DESCRIPTION
The LEDEO TWINY and LEDEO DOUBLE is a one block low intensity
TYPE A beacon with 2 light bulbs. Thanks to DELTA BOX exclusive redundant
technology, one bulb can serve as a back-up (TWINY version). For specific
applications, the 2 bulbs can also operate at the same time (DOUBLE
version). Each version is available with solar power supply as an option. The
Multi-LEDs technology offers a long lifetime (100 000 hours). The specific
design of the box is the most convenient solution on the market for flexible
installation: the mounting frame is part of the box and the light position can
be adjusted in the desired position.
02. ADVANTAGES
• Low consumption
TYPE B • No maintenance
• 2-year warranty
03. APPLICATIONS
supply failure.
04. MODELS
REFERENCE VOLTAGE PHOTOCELL DRY CONTACT MODE
LBIATWCB 48V DC Included Included Twiny
LBIATWMB 110-240V AC Included Included Twiny
LBIADBCB 48V DC Included Included Double
LBIADBMB 110-240V AC Included Included Double
LBIBTWCB 48V DC Included Included Twiny
LBIBTWMB 110-240V AC Included Included Twiny
LBIBDBCB 48V DC Included Included Double
LBIBDBMB 110-240V AC Included Included Double

05. CHARACTERISTICS
DIMENSIONS
TYPE A TYPE B
LUMINOUS
Luminous intensity > 10 Cd > 32 Cd
MTBF 100 000 hours
ELECTRICAL
Voltage 48V DC or 110 to 240V AC
Consumption Twiny < 2 Watts < 6 Watts
Double < 4 Watts < 12 Watts
Current Imax In 48V: I <50mA In 48V: I < 110mA
186 186
4x
4x
8,5
8,5
Twiny
In 230V: I <10mA In 230V: I < 23mA
In 48V: I <100mA In 48V: I < 220mA
Double
In 230V: I <20mA In 230V: I < 46mA
236
236
MECHANICAL
Body material (box) Composite Aluminum
Height / Width 420mm / 240mm 477mm / 240mm
Weight < 5 Kg < 8 Kg
WIRING
ENVIRONMENTAL
Humidity 100%
Frost -60°C
Wind speed 240 Km/h
CERTIFICATIONS
CE EN60947-1
CEI60364, NF C15-100
2014 / 35 / UE
FAA Compliant FAA L-810 (Type B)
WARRANTY
Warranty period 2 years

ZAMAC BOX + UPS INSTALLATION
Light mounted on a ZAMAC aluminum box, with 2 adjustable arms
• Stainless steel mounting
for more flexibility during installation, and a battery kit for 12 hours of
autonomy. Includes cable gland and terminal block. • Driving box
• Power supply
• Solar kit
• Iron plate and thread rod

SOLAR TYPE A – SINGLE AND TWINY
01. DESCRIPTION
The SOLEOBIA and SOLEOBIA TWINY are environmentally friendly
SOLEO TYPE A - SINGLE systems, dedicated to an autonomous night beaconing (red steady
burning). The long life LEDs (100 000 hours) enable to have a maintenance
free system, and the solar station is dimensioned for more than 120 hours
of autonomy. The device is provided with a photocell for an automatic
switch ON / OFF and a dry contact for failure alarm. It is also available
with a 110-240V input as back-up power supply. The TWINY version is
equipped with a second light bulb and with the exclusive redundant DELTA
BOX system, which automatic test is launched every day. In case of failure
of one light bulb, the second light bulb automatically switches on. The
specific design of the box is the most convenient solution on the market
for installation: the mounting frame is part of the box and its arms can be
adjusted in horizontal or vertical position.
02. ADVANTAGES
• Proven solar technology and dimensionning
• Autonomous system (no need for other power supply)
• 2-year warranty
SOLEO TYPE A - TWINY • Zamac box with epoxy powder painting
• Available with cable between the lights and the solar unit for an easier
accessibility to the box and panels.
03. APPLICATIONS
supply failure.
04. MODELS
REFERENCE VOLTAGE PHOTOCELL DRY CONTACT TYPE
SOLBIA10C Solar Included Not Included Single
SOLBIA11C Solar Included Included Single
SOLBIATWC Solar Included Included Twiny

05. CHARACTERISTICS
LUMINOUS DIMENSIONS
MTBF 100 000 hours
ELECTRICAL
Voltage Solar
Solar panel 10 Watts Monocrystalline
Battery 2x AGM 12V 7Ah
Autonomy 120 hours (without charging)
MECHANICAL 186
4x
8,5
Body material Zamac
Lens material Composite
Mounting M8 screw (in option) 236

Weight < 11 Kg
Solar panel dimensions 345mm x 245 mm
ENVIRONMENTAL Drilling
Humidity 100%
Frost -60°C
Wind speed 240 Km/h
AVAILABLE ACCESSORIES FOR
INSTALLATION
CERTIFICATIONS
CE EN60947-1
CEI60364, NF C15-100
2014 / 35 / UE
• Specific stainless steel mounting
WARRANTY • Iron plate and thread rod
AVAILABLE VERSIONS
UNCOUPLED BULB 230V BACK-UP REINFORCED
Can be provided with 5 to The ZAMAC box is provided Available with a 20W solar
20m of cable between the with a 110-240V input for a panel for areas with low sun
bulb and solar unit, to ease back-up power supply. exposure
maintenance operations.

SOLAR TYPE B – SINGLE AND TWINY
01. DESCRIPTION
The SOLEOBIB and SOLEOBIB TWINY are environmentally friendly
SOLEO TYPE B - SINGLE systems, dedicated to an autonomous night beaconing (red steady
burning). The long life LEDs (100 000 hours) enable to have a maintenance
free system, and the solar station is dimensioned for more than 60 hours of
autonomy. The device is provided with a photocell for an automatic switch
ON / OFF and a dry contact for failure alarm. It is also available with a 110-
240V input as back-up power supply. The TWINY version is equipped with
a second light bulb, and with the exclusive redundant DELTA BOX system,
which automatic test is launched every day. In case of failure of one light
bulb, the second light bulb automatically switches on. The specific design
of the box is the most convenient solution on the market for installation: the
mounting frame is part of the box and its arms can be adjusted in horizontal
or vertical position.
02. ADVANTAGES
• Proven solar technology and dimensionning
• Autonomous system (no need for other power supply)
• 2-year warranty
• Zamac box with epoxy powder painting
SOLEO TYPE B - TWINY • Available with cable between the lights and the solar unit for an easier
accessibility to the box.
03. APPLICATIONS
supply failure.
04. MODELS
REFERENCE VOLTAGE PHOTOCELL DRY CONTACT TYPE
SOLBIB10C Solar Included Not Included Single
SOLBIB11C Solar Included Included Single
SOLBIBTWC Solar Included Included Twiny

05. CHARACTERISTICS
LUMINOUS DIMENSIONS
MTBF 100 000 hours
ELECTRICAL
Voltage Solar
Solar panel 1 x 20 Watts Monocrystalline
Battery 2 x AGM 12V 7Ah
Autonomy 60 hours (without charging)
MECHANICAL 186
4x
8,5
Body material Zamac
Lens material Aluminum
Mounting M8 screw (in option) 236
Height 480mm
Weight < 15 Kg
Solar panel dimensions 525 mm x 325 mm
ENVIRONMENTAL Drilling
Humidity 100%
Frost -60°C
Wind speed 240 Km/h INSTALLATION
CERTIFICATIONS
CE EN60947-1
CEI60364, NF C15-100
2014 / 35 / UE
• Specific stainless steel mounting
Quality ISO 9001 ; 2015 • Iron plate and thread rod
WARRANTY
AVAILABLE VERSIONS
UNCOUPLED BULB 230V BACK-UP REINFORCED
Can be provided with 5 to The ZAMAC box is provided Available with a 30W solar
20m of cable between the with a 110-240V input for a panel for areas with low sun
bulb and solar unit, to ease back-up power supply. exposure
maintenance operations.

EXPLOSION PROOF
01. DESCRIPTION
The LEDEO BIA / LEDEO BIB ATEX version is a low intensity beacon
particularly adapted to dangerous environments. With an explosion proof
body and a Multi-LEDs technology, it is dedicated to the night beaconing
of obstacles in industrial areas. The beacon has a long lifetime (100 000
hours) and a very low consumption: <2W for the type A and <6W for the
type B. It can be provided with a photocell for an automatic switch ON/
OFF and with a dry contact for failure alarm.
02. ADVANTAGES
• IP Class 66 Explosion proof body
• Low consumption between 2W (type A) and 6W (type B)
• No maintenance
• 2-year warranty
03. APPLICATIONS
to 45 meters in height. According to the rules, an uninterruptible power
supply cabinet must be installed to insure a 12 hours beaconing in case
of power supply failure.
04. MODELS
Low intensity explosion proof TYPE A Low intensity explosion proof TYPE B
REFERENCE VOLTAGE PHOTOCELL DRY CONTACT REFERENCE VOLTAGE PHOTOCELL DRY CONTACT
LBIA00CX 12, 24, 48V DC Not included Not Included LBIB00CX 24, 48V DC Not included Not Included
LBIA01CX 12, 24, 48V DC Not included Included LBIB11CX 24, 48V DC included Included
LBIA11CX 12, 24, 48V DC Included Included LBIB01CX 24, 48V DC Not included Included
LBIA00MX 110-240V AC Not included Not included LBIB00MX 110-240V AC Not included Not included
LBIA01MX 110-240V AC Not included Included LBIB01MX 110-240V AC Not included Included
LBIA11MX 110-240V AC Included Included LBIB11MX 110-240V AC Included Included

05. CHARACTERISTICS
WIRING
TYPE A TYPE B
LUMINOUS
24V, 48 V DC
MTBF 100 000 hours
ELECTRICAL
Consumption < 2 Watts max. < 6 Watts max
Current Imax In 12V: I < 200mA
In 24V: I < 100mA In 24V: I < 220mA
In 48V: I < 50mA In 48V: I < 110mA
In 230V: I = 10mA In 230V: I = 23mA

With dry contact Without dry contact
Cable 2 meters
MECHANICAL
230 V DC
Lens material Borosilicate Glass
Mounting M8 screw (in option)
Height / Width 260mm / 205mm 24V, 48 V DC
Weight < 10 Kg
ENVIRONMENTAL
Humidity 100%
Frost -60°C
Wind speed 240 Km/h
CERTIFICATIONS
CE EN60947-1
CEI60364, NF C15-100
2014 / 35 / UE
OACI Annex 14, Volume I, Chapter 6 With dry contact Without dry contact
WARRANTY
Warranty period 2 years AVAILABLE ACCESSORIES FOR
INSTALLATION

• Driving box
• Power supply
• Solar kit

OBSTRUCTION LOW INTENSITY LIGHT
TYPE A & B – 6.6A
03. CHARACTERISTICS
TYPE A TYPE B
LUMINOUS
MTBF 100 000 hours
ELECTRICAL
Supply voltage 6.6A
Consumption < 2 Watts max. < 6 Watts max.
Cable 0,5 meters
01. DESCRIPTION MECHANICAL

The LEDEO BIA 6.6A is a low intensity beacon
equipped with LEDs technology, directly connected
to the 6.6A loop of airports thanks to the integrated
isolating transformer. Dedicated to night beaconing
Screw spacing 50mm
(steady red), it offers exceptional advantages in
terms of longevity (100 000 hours), robustness Weight < 2 Kg
and energy consumption (<2W). The double male ENVIRONMENTAL

and female secondary FAA connector allows the Humidity 100%
connection in series of multiple beacons, without Frost -60°C
any additional isolating transformer. Colors Wind speed 240 Km/h
available: blue, orange, red, white, green
CERTIFICATIONS
CE EN60947-1
CEI60364, NF C15-100
02. ADVANTAGES 2014 / 35 / UE
• Directly connectable to the 6.6A loop OACI Annex 14, Volume I, Chapter 6
• Double male and female secondary FAA connectors for FAA Compliant FAA L-810
connection in series / or primary loop male connection. Quality ISO 9001; 2015
• Long Life Time > 10 years
• No maintenance
• 2 year-warranty 04. MODELS
LBIA06C 6.6A Not included Not included
LBIB06C 6.6A Not included Not included

OBSTRUCTION LOW INTENSITY LIGHT
TYPE B - INFRARED
RED STEADY BURN – 32 CD NIGHT + INFRARED STEADY BURN
03. CHARACTERISTICS
48V DC 110-240V AC
LUMINOUS
Luminous intensity red > 32 Cd
Luminous intensity infra-red 3 mW/sr min between +5° / +90°
25 mW/sr min between 0° / +5°
60 mW/sr max between -90° / +90°
3 mW/sr min between +5° / +90°
Wave length infra-red LEDS 860 nm 100% relative intensity
MTBF 100 000 hours
ELECTRICAL
01. DESCRIPTION Consumption < 10,5 Watts max.

Current Imax I =45mA I < 220Ma
The LEDEO BIB Infrared (IR) is a low intensity Protection class IP66
light based on multi-LEDs technology. In addition Cable 2 meters
to the red LEDs for a night beaconing (red steady MECHANICAL
burning), it is provided with infrared LEDs to Box material Aluminum
enable visibility with night vision glasses. It is a Lens material Polycarbonate with bird spike
long lifetime beacon (100 000 hours), with a low Mounting M6 screw (included)
consumption (<10,5W). The LEDEO BIB IR can Height / Width 245mm / 120mm
be provided with a photocell for an automatic Screw spacing 50mm
switch ON / OFF, and a dry contact for failure Weight < 1,5 Kg
alarm. It can be solar power supplied for areas ENVIRONMENTAL

where it is difficult to bring power supply, and it Humidity 100%
is designed for an easy installation. Frost -60°C

Wind speed 240 Km/h
CERTIFICATIONS
02. ADVANTAGES CE EN60947-1
CEI60364, NF C15-100
• Long life time > 10 years 2014 / 35 / UE
• Multi-LEDs red & infra-red technology to OACI Annex 14, Volume I, Chapter 6
operate with night vision glasses FAA Compliant FAA L-810
• Low consumption < 10,5W Quality ISO 9001 ; 2015

• DELTA BOX exclusive self-test when the 04. MODELS
photocell is integrated REFERENCE VOLTAGE PHOTOCELL DRY CONTACT
• No maintenance LBIBIR00BC 48V DC Not included Not included

• 2-year warranty LBIBIR01BC 48V DC Not included Included
LBIBIR11BC 48V DC Included Included
LBIBIR00MC 110-240V AC Not included Not included
LBIBIR01MC 110-240V AC Not included Included
LBIBIR11MC 110-240V AC Included Included

MEDIUM INTENSITY OBSTRUCTION LIGHT
TYPE A
WHITE FLASH (20 000 CD DAY / 20 000 CD TWILIGHT / 2 000 CD NIGHT)
01. DESCRIPTION
The LEDEOMIA is a medium intensity light equipped with multi-LEDs
technology, developed with an aluminum design for a natural fresh cooling
system. Dedicated to a day and night beaconing, it has a long life time (100
000 hours), a robust design, and a low consumption (starting from 40W).
The LEDEOMIA is provided with a photocell for an automatic switch ON /
OFF, and a dry contact for failure alarm. Moreover, it can be solar power
supplied and has been designed for an easy installation.
02. ADVANTAGES
• Integrated synchronization wire (optical fiber, GPS and TCPIP available)
• Average consumption <40W
• DELTA BOX exclusive self-test included with photocell
• No maintenance
• 2-year warranty
• IP66
03. APPLICATIONS
14, Chapter 6). Medium Intensity lights can be installed on structures from
45 to 150 meters tall, with an intermediary level of marking. According to
the rules, an uninterruptible power supply cabinet has to be installed to
insure a 12 hours of beaconing in case of power supply failure.
04. MODELS
LMIA01BB* 48V DC Not included included
LMIA11BB 48V DC Included Included
LMIA01MB* 110-240V AC Not included included
LMIA11MB 110-240V AC Included Included
* to be used with an external DELTA BOX photocell

05. CHARACTERISTICS
DIMENSIONS
LUMINOUS
Luminous source White flash LEDS
Luminous intensity 20 000 Cd Day
2 000 Cd Night
Flash frequency 20 to 60 fpm
Iron plate and thread rod in option
MTBF 100 000 hours
ELECTRICAL
Voltage 48V DC / 110 to 240V AC
186
Consumption < 40 Watts at 20 fpm
4x
8,5
Current Imax In 48V: I = 4 400mA
In 230V: I < 1 000mA
236
MECHANICAL
Box material Zamac
Body lamp material Aluminum
Lens material Polycarbonate
Drilling
Weight < 17 Kg WIRING
ENVIRONMENTAL
Humidity 100%
Frost -60°C
Wind speed 240 Km/h
CERTIFICATIONS
CE EN60947-1
CEI60364, NF C15-100
2014 / 35 / UE
WARRANTY

180° VERSION INSTALLATION
The number of LEDs is divided by two for beacons that need to flash
only over a 180° horizontal beam. It enables to decrease the power • Power supply cabinet
consumption. • UPS System
• Solar kit
• Type "L" fixation mountings

TYPE B
RED FLASH (2 000 CD NIGHT)
01. DESCRIPTION
The LEDEO SMIB is a medium intensity light with multi-LEDs technology,
developed with a zamac design for a natural fresh cooling system.
Dedicated to a night beaconing, it is a long life time system (100 000 hours),
very strong with a low consumption (6W at 20 flashes/minute). The LEDEO
SMIB is provided with a photocell for an automatic switch ON/OFF, and a
dry contact for failure alarm. Moreover, it can be solar power supplied. It
has been designed for an easy installation.
02. ADVANTAGES
• Multi-LEDs
• Low consumption 6W (20 flashes/minute)
• No maintenance
• IP66
• Light and compact design for an easy installation
• External LED for visual diagnostic
• Modulation of consumption according to exterior T°C
• Connection box integrated in the light
• 2-year warranty
03. MODELS
SMIB01AB 24V DC Not included Included
SMIB11AB 24V DC Included Included
SMIB01BB 48V DC Not included Included
SMIB11BB 48V DC Included Included
SMIB01MB 110-240V AC Not included included
SMIB11MB 110-240V AC Included Included

04. CHARACTERISTICS
DIMENSIONS
LUMINOUS
Luminous source Red flash LEDS
Luminous intensity 2 000 Cd Night
MTBF 100 000 hours
ELECTRICAL
Voltage 24V DC / 48V DC / 110 to 240V AC
Current Imax In 48V: I = 1.5 A Fixation mountings in option
In 230V: I < 400 mA

MECHANICAL
WIRING
Box material Zamac
Height / Width
284mm / 235mm
(with fixation mountings)
Weight < 5 Kg
ENVIRONMENTAL
Humidity 100%
Frost -60°C
Wind speed 240 Km/h
CERTIFICATIONS
CE EN60947-1
CEI60364, NF C15-100
2014 / 35 / UE
WARRANTY AVAILABLE ACCESSORIES FOR

Warranty period 2 years INSTALLATION
• Power supply cabinet

• UPS System
• Solar kit

TYPE C
RED STEADY BURN (2 000 CD NIGHT)
01. DESCRIPTION
The LEDEO MIC is a medium intensity beacon equipped with the multi-
LEDs technology. Dedicated to a night (red steady burning) beaconing,
it is a long lifetime beacon (100 000 hours), very robust and with a low
consumption (<50W). A photocell and a dry contact can be provided
either in the light or deported in a control cabinet (safety power supply or
conventional control panel). It can be solar power supplied and has been
designed for an easy installation.
02. ADVANTAGES
• Low consumption <50W
• No maintenance
• 2-year warranty
• IP66
03. MODELS
LMIC00BB 48V DC Not included Not included
LMIC01BB 48V DC Not included Included
LMIC11BB 48V DC Included Included
LMIC00MB 110-240V AC Not included Not included
LMIC01MB 110-240V AC Not included Included
LMIC11MB 110-240V AC Included Included
SCOPE OF APPLICATIONS Pylon

Airport Building Stack
04. CHARACTERISTICS
DIMENSIONS
LUMINOUS
Luminous source Red steady burning LEDS
Luminous intensity 2 000 Cd
MTBF 100 000 hours
ELECTRICAL
Consumption < 50 Watts
Current Imax To 48V: I = 1 500 mA
Protection class To 230V: I < 350 mA
IP66
MECHANICAL
Box material Zamac
Weight < 16 Kg
ENVIRONMENTAL
Humidity 100%
WIRING
Frost -60°C
Wind speed 240 Km/h
CERTIFICATIONS
CE EN60947-1
CEI60364, NF C15-100
2014 / 35 / UE
WARRANTY

AVAILABLE VERSIONS INSTALLATION
180° VERSION
• Power supply
The number of LEDs is divided by two for beacons that need to flash
• UPS System
only over a 180° horizontal beam. It enables to decrease the power
• Solar kit
consumption.

DUAL TYPE A & B
WHITE FLASH (20 000 CD DAY / 20 000 CD TWILIGHT) + RED FLASH (2 000 CD NIGHT)
01. DESCRIPTION
The LEDEO MIAB is a medium intensity beacon equipped with the multi-
LEDs technology. Dedicated to a day (white flash) and night (red flash)
beaconing, it is a long life beacon (100 000 hours), very robust and with a
low consumption (<40W). A photocell and a dry contact can be provided
02. ADVANTAGES
• Integrated synchronization wired, optical fiber, GPS and TCPIP available
• Multi-LEDs
• No maintenance
• 2-year warranty
• IP66
03. APPLICATIONS
14, Chapter 6). Medium Intensity lights can be installed on structures
from 45 to 150 meters tall, with an intermediary level of marking.
According to the rules, an uninterruptible power supply cabinet has to
be installed to insure a 12 hours of beaconing in case of power supply
failure.
04. MODELS
LMIAB01BB* 48V DC Not included Included
LMIAB11BB 48V DC Included Included
LMIAB01MB* 110-240V AC Not included Included
LMIAB11MB 110-240V AC Included Included

05. CHARACTERISTICS
DIMENSIONS
LUMINOUS
Luminous source White / Red flash LEDS
2 000 Cd Night
MTBF 100 000 hours
ELECTRICAL
Consumption (day mode) < 40 Watts at 20 fpm 186
4x
8,5
Consumption (night mode) < 15 Watts at 20 fpm
Current Imax (day mode) In 48V: I = 4 400mA
In 230V: I < 1 000mA
Current Imax (night mode) In 48V: I = 1 400mA
236
In 230V: I < 350mA
MECHANICAL
Box material Zamac
Drilling
Height / Width 410mm / 410mm WIRING
Weight < 18 Kg
ENVIRONMENTAL
Humidity 100%
Frost -60°C
Wind speed 240 Km/h
CERTIFICATIONS
CE EN60947-1
CEI60364, NF C15-100
2014 / 35 / UE
FAA Compliant FAA L-864 / L-865
WARRANTY
180° VERSION
• Power supply
The number of LEDs is divided by two for beacons that need to flash • UPS System
only over a 180° horizontal beam. It enables to decrease the power • Solar kit
consumption. • Type "L" fixation mountings

DUAL TYPE A & C
WHITE FLASH (20 000 CD DAY / 20 000 CD TWILIGHT) + RED STEADY BURN (2 000 CD NIGHT)
01. DESCRIPTION
The LEDEO MIAC is a medium intensity beacon equipped with the multi-
LEDs technology. Dedicated to a day (white flash) and night (red flash)
beaconing, it is a long life beacon (100 000 hours), very robust and with a
low consumption (<50W). A photocell and a dry contact can be provided
02. ADVANTAGES
• No maintenance
• 2-year warranty
• Zamac box with epoxy power painting
• IP66
03. APPLICATIONS
04. MODELS
LMIAC01BB* 48V DC Not included Included
LMIAC11BB 48V DC Included Included
LMIAC01MB* 110-240V AC Not included Included
LMIAC11MB 110-240V AC Included Included

05. CHARACTERISTICS
DIMENSIONS
LUMINOUS
Luminous source White flashing / Red steady burning LEDS
20 000 Cd (Day, white)
Luminous intensity
2 000 Cd (Night, red)
MTBF 100 000 hours
ELECTRICAL
Consumption < 50 Watts 186
4x
8,5
Current Imax (day mode) In 48V: I = 4 400mA
In 230V: I < 1 000mA
Current Imax (night mode) In 48V: I = 1 400mA
In 230V: I < 350mA
236
MECHANICAL
Box material Zamac
Body lamp material Aluminum Drilling
Height / Width 410mm / 410mm WIRING
Weight < 18 Kg
ENVIRONMENTAL
Humidity 100%
Frost -60°C
Wind speed 240 Km/h
CERTIFICATIONS
CE EN60947-1
CEI60364, NF C15-100
2014 / 35 / UE
FAA Compliant FAA L-864 / L-865
WARRANTY
180° VERSION
• Power supply
The number of LEDs is divided by two for beacons that need to flash • UPS System
only over a 180° horizontal beam. It enables to decrease the power • Solar kit
consumption.

OBSTRUCTION MEDIUM INTENSITY LIGHT
EXPLOSION PROOF
RED FLASH – 2 000 CD NIGHT (TYPE B)
01. DESCRIPTION
The SMIB ATEX version is a medium intensity beacon particularly adapted
to dangerous environments. With an explosion proof body and a Multi-
LEDs technology, it is dedicated to the night beaconing of obstacles in
industrial areas. The beacon has a long lifetime (100 000 hours) and a very
low consumption (<6W).
The SMIB ATEX can be provided with a photocell for an automatic switch
ON/OFF, and a dry contact for failure alarm. It has been designed for an
easy installation.
02. ADVANTAGES
• Explosion proof capsule cap (IP Class IP67)
• Connection box integrated to the light
• No maintenance
• 2-year warranty
03. APPLICATIONS
04. MODELS
SMIB01AX 24V DC Not included Included
SMIB11AX 24V DC Included Included
SMIB01BX 48V DC Not included Included
SMIB11BX 48V DC Included Included
SMIB01MX 230V AC Not included Included
SMIB11MX 230V AC Included Included

05. CHARACTERISTICS
WIRING
LUMINOUS
Luminous source Red flashing LEDS
MTBF 100 000 hours
ELECTRICAL
Lightning protection Integrated
Consumption 6 Watts at 20 fpm

Current Imax
In 24V: I = 3 A
In 48V: I = 1,5 A
In 230V: I = 0,32 A
MECHANICAL
Body material Aluminum cast
Lens material Borosilicate Glass
Weight < 14 Kg
ENVIRONMENTAL
Humidity 100% AVAILABLE ACCESSORIES FOR
INSTALLATION
Frost -60°C
Wind speed 240 Km/h

CERTIFICATIONS • Driving box
CE • Power supply
EN60947-1
CEI60364, NF C15-100 • Safety power supply
2014 / 35 / UE • Solar kit
WARRANTY

TYPE B
RED FLASH (2 000 CD NIGHT) + INFRARED
03. CHARACTERISTICS
LUMINOUS
Luminous source Red flash LEDS
MTBF 100 000 hours
ELECTRICAL
Consumption 7 Watts at 20 fpm
Current Imax In 48V: 1,8 A
In 230V: 0,4 A
01. DESCRIPTION Protection class IP66
The LEDEO SMIB IR is a medium intensity combining MECHANICAL

Red & Infrared LEDs and provided with a base Box material Zamac
designed for a natural fresh cooling. Dedicated to a Lens material Polycarbonate
night beaconing (red flash), it is a long life time system Mounting M6 screw (included)
(100 000 hours), with a robust design and a low Height / Width 284mm / 235mm
consumption (7W at 20 flashes/minute). The LEDEO Weight < 5 Kg
SMIB IR is provided with a photocell for an automatic ENVIRONMENTAL
switch ON/OFF, and a dry contact for failure alarm. It Humidity 100%
can be solar power supplied and has been designed Frost -60°C
for an easy installation. Wind speed 240 Km/h
CERTIFICATIONS
02. ADVANTAGES CE EN60947-1

CEI60364, NF C15-100
2014 / 35 / UE
• Provided with IR technology for visibility with night
vision glasses
• Integrated synchronization wire (optical fiber, GPS
and TCPIP available)
• Long life time > 10 years WARRANTY
• Low consumption 7W (20 flashes/minute)
• DELTA BOX exclusive self-test included with
photocell
04. MODELS
• No maintenance REFERENCE VOLTAGE PHOTOCELL DRY CONTACT
• Zamac box with epoxy powder painting SMIBIR01AB 24V DC Not included Included
• IP66
SMIBIR11AB 24V DC Included Included
• Light and compact design for an easy installation
SMIBIR01BB 48V DC Not included Included
SMIBIR11BB 48V DC Included Included
• Connection box integrated in the light SMIBIR01MB 110-240V AC Not included Included
• 2-year warranty SMIBIR11MB 110-240V AC Included Included

OBSTRUCTION LIGHT
INFRARED MODULE FOR MEDIUM & HIGH INTENSITY LIGHTS
02. CHARACTERISTICS
LUMINOUS
Luminous intensity 500 mW/sr min between 0° / +2°
1 000 mW/sr max between -90° / +90°
Wave length infra-red LEDS 860 nm 100% relative intensity

MTBF 100 000 hours
ELECTRICAL
Voltage 48V
Consumption < 5 Watts max.
Current Imax I =100mA
Cable 2 meters
MECHANICAL
01. DESCRIPTION Body material Composite
The LMIR is based on infrared technology. Used as Lens material Polycarbonate with bird spike
an additional device in combination with a medium Mounting M6 screw (included)

or high intensity light, the IR technology enables Height / Width 170mm / 120mm
visibility with night vision glasses. It is a long life Weight < 1 Kg
beacon (100 000 hours), very strong, with a low ENVIRONMENTAL
consumption (<5W). The LMIR is directly powered Humidity 100%
by the obstruction light and will follow the same flash
Frost -60°C
and frequency than the light.
Wind speed 240 Km/h
DIMENSIONS CERTIFICATIONS
CE EN60947-1
CEI60364, NF C15-100
2014 / 35 / UE
Drilling

HIGH INTENSITY OBSTRUCTION LIGHT
TYPE A
WHITE FLASH – 200 000 CD DAY / 20 000 CD TWILIGHT / 2 000 CD NIGHT
01. DESCRIPTION
The LEDEO HIA is a high intensity light with multi-LEDs technology,
developed with an aluminum frame for a natural fresh cooling system.
Dedicated to a day, twilight and night marking, it is a long life system,
with a modular conception to reduce the weight of the flash head. The
LEDEO HIA is provided with a control panel including the photocell for an
automatic switch ON / OFF, and a dry contact for failure alarm. It has been
02. ADVANTAGES
• 120° horizontal beam spread
• Long life time up to 10 years
• Aluminum design for natural cooling system
• Low Consumption <150W at 40 fpm
• Mounting frame included
• No maintenance
• 2-year warranty
03. APPLICATIONS
14, Chapter 6). High intensity beacons can be installed on structures higher
than 150 meters in height. According to the rules, an uninterruptible power
supply cabinet must be installed to insure 12 hours of beaconing in case
04. MODELS
LHIA-TF 110-240V Not included Not included
AA-LHIA-A230 110-240V Included Included

05. CHARACTERISTICS
DIMENSIONS
LUMINOUS
20 000 Cd Twilight
2 000 Cd Night
MTBF 100 000 hours
ELECTRICAL
Voltage 110 to 240V AC

Current Imax In 48V: I < 18A (120°)
In 230V: I < 4A (120°)
MECHANICAL
Lens material Glass
Height / Length 500mm / 640mm
Weight < 20 Kg
ENVIRONMENTAL
Humidity 100% AVAILABLE ACCESSORIES FOR
Frost -60°C INSTALLATION
Wind speed 240 Km/h
• Power supply
CERTIFICATIONS
• UPS System
CE EN60947-1
• Solar kit
CEI60364, NF C15-100
• GPS Synchronization, Optical Fiber
2014 / 35 / UE
WARRANTY

HIGH INTENSITY OBSTRUCTION LIGHT
TYPE B
WHITE FLASH – 100 000 CD DAY / 20 000 CD TWILIGHT / 2 000 CD NIGHT
01. DESCRIPTION
The LEDEO HIB is a high intensity light with multi-LEDs technology,
developed with an aluminum frame for a natural fresh cooling system.
Dedicated to a day, twilight and night marking, it is a long life system, with
a modular conception to reduce the weight of the flash head. The LEDEO
HIB is provided with a control panel including the photocell for an automatic
switch ON / OFF, and a dry contact for failure alarm. It has been designed
for an easy installation.
02. ADVANTAGES
• 120° horizontal beam spread
• Long life time up to 10 years
• Low Consumption <75W at 40 fpm
• Mounting frame included
• No maintenance
• 2-year warranty
03. APPLICATIONS
14, Chapter 6). High intensity beacons can be installed on structures higher
than 150 meters in height. According to the rules, an uninterruptible power
supply cabinet must be installed to insure 12 hours of beaconing in case
04. MODELS
LHIB-TF 110-240V Not included Not included
AA-LHIB-A230 110-240V Included Included

05. CHARACTERISTICS
DIMENSIONS
LUMINOUS

20 000 Cd Twilight
2 000 Cd Night
MTBF 100 000 hours
ELECTRICAL

Current Imax In 48V: I < 8,5A (120°)
In 230V: I < 2A (120°)
MECHANICAL
Lens material Glass
Height / Length 370mm / 640mm AVAILABLE ACCESSORIES FOR

Weight < 15 Kg INSTALLATION
WEIGHT
Humidity 100%
• Power supply
Frost -60°C • UPS System
• Solar kit
Wind speed 240 Km/h • GPS Synchronization, Optical Fiber
CERTIFICATIONS
CE EN60947-1
CEI60364, NF C15-100
2014 / 35 / UE
WARRANTY

OBSTRUCTION LIGHT POWER SUPPLY
POWER SUPPLY CONTROL PANEL
230V/48V – 230V/230V – 400V/48V
01. DESCRIPTION
Our range of control panels is designed to power supply any Obstruction
Light, on any type of installation. It integrates all the necessary electric
protections. The beacons can be wired in series or in a star configuration.
In standard version, the control panel is equipped with an ON/OFF switch,
an input lightning protection and one default visual indicator for the Main
Power Supply. In option, it is possible to have additional default visual
indicators and buttons or switches.
02. ADVANTAGES
• Cabling customized by DELTA BOX in its factory to match the
requirements of your project
• IP66 Structure
• 2-year Warranty
• Input Lightning Protection
• Painted Steel
* The visual elements are for guidance only. The size of the power supply control panel can change depending on the options needed.

03. CHARACTERISTICS
Reference AAMB–10AF-75W AAMB – I0AF-500W AAMB– I0AF-1000W AAMM-10AF AA-A400C048-10AF
APPLICATIONS
Maximum number of 160 L.I. type A
25 L.I. type A To be determined
beacons 80 L.I. type B 3 M.I. type A or AB 1 M.I. type A or AB 6
12 L.I. type B according to the
L.I. = Low Intensity 1 M.I. type A or AB 12 M.I. type B or C M.I. type B or C
1 M.I. type B or C installation
M.I. = Medium Intensity 6 M.I. type B or C
TECHNICAL CHARACTERISTICS
ELECTRICAL
Input Standard Voltage 110-240V 400V
Output Standard Voltage 48V 110-240V 48V
Functioning Temperature -55°C à +55°C
MECHANICAL
Type of Control Panel 1 1 or 2 3 1 or 2 2
Control Panel Material Painted Steel Polyester Painted Steel Polyester
Fixation With exterior legs
ENVIRONMENTAL
Humidity 80%
Wind Speed 160 Km/h
CERTIFICATIONS
CE EN60947-1 ; CEI60364, NF C15-100 ; 2014 / 35 / UE
WARRANTY
Warranty Period 2 years
DIMENSIONS AND WEIGHT

TYPE 1 TYPE 2 TYPE 3
300x300x210mm – 7 kg 380x380x210mm – 10 kg 500x400x260mm – 6 kg

TYPE 4 TYPE 5 TYPE 6
TYPE 4* TYPE 5* TYPE 6*
600x600x250mm – 16 kg 700x500x250mm – 31 kg 1000x760x300mm – 56 kg
* For customized applications

OBSTRUCTION LIGHT POWER SUPPLY
SAFEBOX
UNINTERRUPTIBLE POWER SUPPLY
01. DESCRIPTION
Our Uninterruptible Power Supply cabinet is dedicated to ensure 12
hours of autonomy in case of main power supply failure. The SAFEBOX
is a UPS solution optimized for obstruction lights based on high quality
batteries. The SAFEBOX is available with a 110-240V input and a 48V
or 110-240V output. In standard version, it is equipped with an ON/OFF
switch, an input lightning protection and one default visual indicator for the
Main Power Supply. In option, it is possible to have additional default visual
indicators and buttons or switches.
02. ADVANTAGES
• Compact
• IP66 structure
• Functional status and charging indication on the front of the cabinet
• 12 hours autonomy
• 2-year warranty
03. MODELS
REFERENCE POWER SUPPLY BATTERY PACK CAPACITY
SBMCBI4-10 230V / 48V 4 Batteries 12V 7Ah 10 LBIA or 4 LBIB
SBMCBI8-20 230V / 48V 4 Batteries 12V 12Ah 20 LBIA or 8 LBIB
SBMCMI1 230V / 48V 4 Batteries 12V 24Ah 1 LMIA or 4 SMIB
SBMMMI1 230V / 230V 4 Batteries 12V 24Ah 1 LMIA or 4 SMIB

04. CHARACTERISTICS
MODELS & TECHNICAL CHARACTERISTICS
Reference SBMCBI4-10 SBMCBI8-20 SBMCMI1 SBMCMI2 SBMCMI3 SBMMMI1 SBMMMI2 SBMMMI3
ELECTRICAL
Input Voltage 110-240V (48V or 400V available)
Output Voltage 48V 110-240V
Operating T°C -10°C à +55°C
Autonomy 12 hours
Battery AGM
MECHANICAL (CABINET)
Body Material Polyester Painted Steel
Mounting With external mounting bracket (not included)
Dimensions 580x460x290 (mm) 700x500x290 (mm)
Weight 20 kg 24 kg 37 kg 55 kg
MECHANICAL (BATTERY PACK)
Body Material Aluminum
Number of rack 1 1 1 2 1 1 2 1
Dimensions per rack Integrated in
Integrated in the cabinet 645x250x260 825x405x305 645x250x260 825x405x305
(mm) the cabinet
Total Weight 8,8 kg 15,2 kg 40 kg 80 kg 140 kg 40 kg 80 kg 140 kg

Protection class IP 66
ENVIRONMENTAL
Humidity 80%
Wind Speed 160 Km/h
CERTIFICATIONS
CE EN60947-1 ; CEI60364, NF C15-100 ; 2014 / 35 / UE
WARRANTY
Warranty 2 years (excluding batteries)
DIMENSIONS OF THE CABINET
Pack of 4 batteries 12V 24Ah Pack of 4 batteries 12V 100Ah
Cabinet

CONDUCTOR MARKING LIGHT
LOW INTENSITY TYPE A & B
01. DESCRIPTION
The LEDEO BHT is a one assembly low intensity light dedicated to the
beaconing of high voltage lines. It operates with a current transformer that
uses the electro-magnetic field of the line to power up the LEDs. It is an
autonomous and long lifetime system (100 000 hours), which design has
been proven worldwide. With only one reference serving all the power line
capacities, its compact design and light weight allow the quickest and
easiest installation on the market.
02. ADVANTAGES
• Self-powered and autonomous system
• Proven design in operation worldwide
• Self-centered on the conductor cable thanks to a specific nut
• Product completely filled with resin to avoid vibration issues on the electronics
• Only 1 reference for all line voltage capacities
• No corona effect
• Installation time reduced
• No maintenance required
• 2-year warranty
03. APPLICATIONS
The LEDEO BHT complies with the ICAO regulations as it is power supplied
by the magnetic field around the cable of the high voltage line. The light
can be used for beaconing high voltage lines up to 500kV. The installation
specifications for high voltage overhead cables are mainly dealing with the
intervals between two beacons:
• 70 meters for sensitive specification location in the vicinity of an airport
• 105 meters for other locations
Moreover, the light must be installed at more than 10 meters from the
closest supporting tower.
04. MODELS
LBIA00HT 1kV to 500kV Not included Not included
LBIB00HT 1kV to 500kV Not included Not included
SCOPE OF APPLICATIONS HV Line

05. CHARACTERISTICS
INSTALLATION
TYPE A TYPE B
LUMINOUS
MTBF 100 000 hours
ELECTRICAL
Voltage 1kV to 500kV
Current Imin 7A
Current 10A
Current Imax 1000A
MECHANICAL
Body material ABS
Mounting Fixation nuts
Weight < 6 Kg
ENVIRONMENTAL
Humidity 100%
Frost -60°C
Wind speed 240 Km/h
CERTIFICATIONS
CE EN60947-1
CEI60364, NF C15-100
2014 / 35 / UE

DIMENSIONS
WARRANTY
HV Line
AIRCRAFT WARNING SPHERES
RED - WHITE - ORANGE
01. DESCRIPTION
Our warning sphere is a diurnal marking ball installed on high voltage
lines and pylon stays. Very light and resistant to severe weather conditions
(extreme cold or high solar exposure), the warning sphere is available in
red, white or orange.
The sphere can be adapted on any diameter of Earth cable and thanks to
its silicon clamping system, does not require any armor rod to be fixed on
the cable.
02. ADVANTAGES
• Exclusive silicon clamping system to ensure stability on the line
• Proven design in operation worldwide, no damage to the cable
• Weather resistant (extreme cold and high solar exposure)
• Physical property retention after UV exposure
• Color stability
• Practical toughness and rigidity
• Dimensional stability
• Adaptable to any diameter of cable or conductor
03. MODELS
JAW 07MM JAW 12MM JAW 18MM
REFERENCE* COLOR (CABLE FROM (CABLE FROM (CABLE FROM
10 TO 15MM) 15 TO 20MM) 20 TO 26.4MM)
WS60R-d07 RED
WS60R-d12 RED
WS60R-d18 RED
WS60W-d07 WHITE
WS60W-d12 WHITE
WS60W-d18 WHITE
WS60O-d07 ORANGE
WS60O-d12 ORANGE
WS60O-d18 ORANGE
* More références are available for cables of smaller or bigger diameter
SCOPE OF APPLICATIONS HV Line

04. CHARACTERISTICS
AIRPORT & HELIPADS
EQUIPMENT
INSTALLATION
MECHANICAL
Body material Composite
Color Red, White, Orange
Mounting Screws (Included)
Diameter 600mm
Thickness 3mm
Weight < 5 Kg
ENVIRONMENTAL
Humidity 100%
Frost -60°C
Wind speed 240 Km/h
CERTIFICATIONS
CE EN60947-1
CEI60364, NF C15-100
2014 / 35 / UE
WARRANTY
DIMENSIONS
HV Line
AIRPORT EQUIPMENT
STNA (ICAO) WIND DIRECTOR INDICATOR
7.40 METERS
01. DESCRIPTION
The STNA WDI is our ICAO compliant mast. This tilting mast measures
7,40 Meters and is equipped with 3 braces to ensure its stability. The
standard wind vanes are 60 or 100 cm diameter, but other diameters are
also available. The wind vane support is equipped with two auto-lubricated
Teflon rings to allow its rotation. This system is very resistant to wear
phenomena, and doesn’t require any maintenance, therefore offering an
exceptional long life time.
In option, the WDI can be manufactured in stainless steel, aluminum or fiber

glass. A frangible ring can be added at the bottom of the pole for frangibility,
and different power supply versions are available (solar, 230V, 6.6A).
02. MODELS
WIND POLE
POWER + INTERNAL OBSTACLE WIND
REFERENCE VANE WWIND
SUPPLY LIGHTING LIGHT SOCK
DIAM. VANE
STNABG60 60 cm
STNABG60M 60 cm
STNABG100 100 cm
STNABG100M 100 cm
STNABG60E2L 60 cm 230V
STNABG100E2L 100 cm 230V
STNABG60E6L 60 cm 6,6A
STNABG100E6L 100 cm 6,6A
STNABG60C2L 60 cm 230V
STAINLESS STEEL WINDVANE
STNABG100C2L 100 cm 230V
STNABG60C6L 60 cm 6,6A
LEDs Obstacle Light STNABG100C6L 100 cm 6,6A
REFERENCE DESIGNATION
LBIA-HMA-6.6A Low intensity Obstacle Light Type A for WDI 6.6A
LBIA-HMA-C048 Low intensity Obstacle Light Type A for WDI 110-240V

Internal light
LMA00BB Windsock internal lighting
MA-FRANGIBLE Frangible part at the bottom of the mast

03. CHARACTERISTICS
DIMENSIONS
MECHANICAL
Height 7.40 meters
Tiltable part Yes
Protection Galvanized steel + White epoxy paint
Paint Red & White
Mounting Anchorage Block (Included)
Helipads: Diameter 60cm or 90cm

Wind vane
Airports: Diameter 100cm
Braces 3 x 120°
Anchorage Block 600 x 600 x 800 mm
ENVIRONMENTAL
Humidity 100%
Frost -60°C
Wind speed 160 Km/h
CERTIFICATIONS Concrete Foundations
CE EN60947-1
CEI60364, NF C15-100
2014 / 35 / UE
WARRANTY
ELECTRICAL
Power supply 6.6A / 230V / 24V (Solar)

Consumption 3 Watts (obstacle light)
8 Watts (internal light)
Protection Class IP66
OPTIONS
Reinforced mast
Obstacle Light
External lighting by 4 Leds
Floodlights (230V or 6.6A)
Consumption < 4 x 5.2 W
Frangibility of the mast
Solar power supply

Stainless steel / Aluminum /
Fiber Glass manufacture
Hoist (in option)

AIRPORT EQUIPMENT
FAA WIND DIRECTION INDICATOR
3 OR 6 METERS
01. DESCRIPTION
Our FAA WDI is compliant to the FAA rules. It is manufactured in galvanized
steel with an orange paint and is available in 3 or 6 meters. The 3M WDI
is tiltable at the base of the mast and the 6M WDI is tiltable in the middle
of the mast.
3 diameters of preformed wind vane are proposed together with the

suitable windsocks. The wind vane support is equipped with two auto-
lubricated teflon rings to allow its rotation. This system is very resistant to
wear phenomena, and doesn’t require any maintenance, therefore offering
an exceptional life time.
Various options are available such as the windsock lighting (internal or

external) and the topmast Obstacle Light. These options can operate
under different power supplies: 24-48V, 230V, Solar but also in 6,6 A.
02. MODELS
WIND VANE DIAMETER
REFERENCE 3 METERS 6 METERS
CM INCHES
FAA3-BG30 30 12’
FAA3-BG45 45 18’
FAA3-BG60 60 24’
3 METERS
FAA6-BG45 45 18’
FAA6-BG60 60 24’
FAA6-BG90 90 36’
6 METERS
Hoist (in option) Exter nal Lighting + Obstacle Light Solar power supply

03. CHARACTERISTICS
DIMENSIONS
MECHANICAL
Height 3 or 6 meters
FAA WDI of 3 meters
Tiltable part location Base (3 meters WDI) or Middle (6 meters WDI)
Protection Galvanized steel
Paint Orange
Mounting Anchorage Block (Included)
Preformed wind vane 30 / 60 / 90 cm
Braces No
ENVIRONMENTAL
Humidity 100%
Frost -60°C
Wind speed 160 Km/h
CERTIFICATIONS
FAA Compliant
Warranty 1 year
FAA WDI of 6 meters
ELECTRICAL
Power supply 6.6A / 230V / 2V (Solar)

3 Watts (obstacle light)
Consumption
30 Watts (external light)
OPTIONS
Reinforced mast
Obstacle Light
External lighting by 4 Leds
Floodlights (230V or 6.6A)
Consumption < 4 x 5.2 W
Paint Red & White or Yellow
Frangibility of the mast
Solar power supply

Stainless steel / Aluminum /
Fiber Glass manufacture
INSTALLATION
• Windsock
• Solar power supply

AIRPORT EQUIPMENT
SIMPLE WIND DIRECTION INDICATOR
4 METERS
01. DESCRIPTION
The Simple Mast consists in a 4 meters pole that can be
fixed, provided with braces, or tiltable. 2 mounting frames
in “U” enable an easy and quick installation. In its standard
version, the mast is in galvanized steel painted in white
color.
It is provided with a stainless steel wind vane to be installed

at the top of the mast. The wind vane support is equipped
with two auto-lubricated Teflon rings to allow its rotation.
This system is very resistant to wear phenomena, and
doesn’t require any maintenance, therefore offering an
exceptional long life time. Three diameters of wind vanes
are available with their suitable windsocks.
02. MODELS
WIND VANE
REFERENCE TILTABLE FIXED
DIAMETER
MASBG30 30 cm
MASBG40 40 cm
03. CHARACTERISTICS MASBG50 50 cm
MECHANICAL
MASFG30 30 cm
Height 4 meters
MASFG40 40 cm
Tiltable part Fixed or tiltable
MASFG50 50 cm
Protection Galvanized steel
Paint White
Mounting In « U » DIMENSIONS
Wind vane 30 / 40 / 50 cm
Braces 3 x 120°
ENVIRONMENTAL
Humidity 100%
Frost -60°C
Wind speed 240 Km/h
CERTIFICATIONS
FAA Compliant
Warranty 1 year
Pylon Airport Building Stack

AIRPORT EQUIPMENT
WINDSOCKS FOR WIND DIRECTION INDICATOR
03. MODELS
DIMENSIONS DIMENSIONS
REFERENCE COLOUR
(CM) (INCH)
DBM-SE-30-120-RB 30 x 120 12’ x 47’ Red and white
DBM-SE-30-120-OR 30 x 120 12’ x 47’ Orange

01. DESCRIPTION
Our windsocks are in compliance with the DBM-SE-30-180-OR 30 x 180 12’ x 71’ Orange
International Civil Aviation rules. The windsocks

are handmade in France with a high quality fabric, DBM-SE-40-250-OR 45 x 250 18’ x 99’ Orange
qualified with 160g/m2. With a specific U.V treatment

the color fastness is warranted. DBM-SE-50-225-OR 50 x 225 20’ x 89’ Orange
They offer high resistance to the weather and to the

sun. The standard colors available are red and white, DBM-SE-60-240-OR 60 x 240 24’ x 95’ Orange
or orange. More colors are available. Your logo can

be added. DBM-SE-90-360-OR 90 x 360 36’ x 141’ Orange
DBM-SE-100-450-OR 100 x 450 40’ x 178’ Orange

02. CHARACTERISTICS
WINDSOCKS
Dye Colourfast
Assembly In 5 sections
Mounting By synthetic clamp collars
Grammage 160g/m²

AIRPORT EQUIPMENT
PORTABLE BEACON & MINI PORTABLE BEACON
EMERGENCY & TEMPORARY CLOSING OF RUNWAYS, TAXIWAYS AND SERVICE AREAS
01. DESCRIPTION
Our portable beacon range is a solution for temporary marking or
PORTABLE BEACON emergency closing, based on multi-LEDs technology. The whole system
is autonomous and includes charger (portable beacon only) and battery.
Different monitoring options are available.
02. ADVANTAGES
• Multi-LEDs
• Independent system
• Blinking of the light when the level of load of the battery is low
• 2 year warranty (excluding battery)
• Zamac box with epoxy pauder painting
• No maintenance
• Available in bi-colors (ex: Red AND Blue, Red OR Blue) for runway
closing and taxiway beacons
• Can be connected to 6.6A (without batteries)
• Available with remote control
03. MODELS
MODEL REFERENCE COLOR BATTERY AUTONOMY
BPLBIAR Red 1 x 12V 7Ah 80h
BPLBIAB White 1 x 12V 7Ah 80h
MINI PORTABLE BEACON BPLBIABL Blue 1 x 12V 7Ah 80h
BPLBIAR&B Red AND Blue 1 x 12V 7Ah 80h

Portable
BPLBIAR/B Red OR Blue 1 x 12V 7Ah 80h
BPLBIAV Green 1 x 12V 7Ah 80h
BPLBIAR&V Red AND Green 1 x 12V 7Ah 80h
BPLBIAR/V Red OR Green 1 x 12V 7Ah 80h
BPMLBIAR1 Red 1 x 12V 1,2Ah 20h
BPMLBIAR2 Red 2 x 12V 1,2Ah 40h
BPMLBIAW1 White 1 x 12V 1,2Ah 20h
BPMLBIAW2 White 2 x 12V 1,2Ah 40h

Mini
BPMLBIAR/B1 Red OR Blue 1 x 12V 1,2Ah 20h
BPMLBIAR/B2 Red OR Blue 2 x 12V 1,2Ah 40h
BPMLBIARV1 Red AND Green 1 x 12V 1,2Ah 20h
BPMLBIARV2 Red AND Green 2 x 12V 1,2Ah 40h

04. CHARACTERISTICS
DIMENSIONS
PORTABLE MINI PORTABLE
BEACON BEACON MINI PORTABLE BEACON
LUMINOUS
Luminous source Red / White / Blue / Green / Orange
MTBF 100 000 hours
ELECTRICAL
Functioning temperature -10°C to +55°C
Autonomy 20 hours (1 battery)
80 hours
40 hours (2 batteries)
Loading time 7 hours 1.5 hours per battery
Battery AGM 12V 7Ah AGM 12V 1,2Ah
MECHANICAL
Body material Zamac Aluminum
PORTABLE BEACON
Lamp material Composite
Height 420mm 222mm
Weight < 5 Kg < 2,5 Kg
ENVIRONMENTAL
Humidity 100%
Frost -60°C
186
4x
Wind speed 240 Km/h

8,5
CERTIFICATIONS
CE EN60947-1
CEI60364, NF C15-100
236
2014 / 35 / UE
WARRANTY
TRANSPORTATION TRAILER
INSTALLATION
• Specific trailer (40 or 60 beacons)

• Remote control
• Can be piloted via PCL
• Plug to recharge serveral beacons

AIRPORT EQUIPMENT
RUNWAY AND TAXIWAY EDGE BEACON
01. DESCRIPTION
The LEDEO BDP range answers different needs of elevated beaconing:
• Taxiway edge and traffic lanes
• Runway closing
• Runway edge
The LED technology offers strong performances in terms of life time

(100 000 hours). It is designed for an easy installation.
02. ADVANTAGES
• Long life time > 10 ans
• Multi-LED technology
• Multi-use: available in various colors
• Enables a day & night beaconing (reflecting base in option)
• The exclusive design of DELTA BOX isolating transformer allows
continuity of the loop in case of failure of one or several lights
• Maintenance free: no replacement of the light bulb needed
• FAA connection, depending on your need:
o 2 FAA input & output plugs with connectors type 1 & 7
o 2 FAA input & output plugs with connectors type 6
• 2-year warranty
03. MODELS
REFERENCE COLOR VOLTAGE WIRING
BDP-W-230 White 110 to 240V AC Secondary
BDP-B-230 Blue 110 to 240V AC Secondary
BDP-G-230 Green 110 to 240V AC Secondary
BDP-O-230 Amber 110 to 240V AC Secondary
BDP-R-230 Red 110 to 240V AC Secondary
BDP-W-6.6 White 6.6A Secondary
BDP-B-6.6 Blue 6.6A Secondary
BDP-G-6.6 Green 6.6A Secondary
BDP-O-6.6 Amber 6.6A Secondary
BDP-R-6.6 Red 6.6A Secondary

04. CHARACTERISTICS
LUMINOUS
Colors Blue White Green Amber Red
Luminous source LEDs
Horizontal beam 360° or 180°
Vertical beam 0-6° 6-75° 2-10°
Luminous intensity (in candelas) 2 0.2 > 15 10 to 30 7.5 to 25 2.5
MTBF 100 000 hours
ELECTRICAL
Voltage 110 to 240V AC / 6.6A
MECHANICAL
Body material Plastic
Mounting Tripod – 2’’GAZ BSP (not inclued)
Height 328mm
Weight 6 Kg
ENVIRONMENTAL
Humidity 100%
Frost -40°C
Wind speed 160 Km/h
CERTIFICATIONS
CE EN60947-1
CEI60364, NF C15-100
2014 / 35 / UE
OACI Annex 14, Volume I
WARRANTY
Warranty 2 years
DIMENSIONS

INSTALLATION
• Connection FAA style 6

• Connection FAA style 1 and 7
to connect in series
• Tripod 2’’GAZ BSP

AIRPORT EQUIPMENT
TRUNCATED CONE AND DIHEDRAL BEACON
TRUNCATED CONE 01. DESCRIPTION

These composite beacons are dedicated to the signaling of runways and
roads located within Airports and Airfields. They are studied to avoid any
damage to the engine in case of shock. White truncated cones to delimit
the runways and yellow for traffic lanes.
02. MODELS
REFERENCE DESIGNATION COLOUR
BPTRY Truncated cone Yellow
BPTRW Truncated cone White
ACCESSORIES AVAILABLES
• Fixation
DIHEDRAL CONE 01. DESCRIPTION

These composite beacons are dedicated to the signaling of runways and
roads located within Airports and Airfields. They are studied to avoid any
damage to the engine in case of shock. This dihedral beacon is red and
white to mark the extremities of runways. This beacon is delivered with 2
frangible pickets treated with Carbonyl as well as with 4 holding nuts.
02. MODELS
REFERENCE DESIGNATION COLOUR
BPDIEDRE Dihedral Cone Red and white

AIRPORT EQUIPMENT
FATO & TLOF LIGHTS
INSET LED LIGHTS
01. ADVANTAGES
• Long lifetime >10 years
• Optimized light output due to patented optics concept
• Compact and low propulsion
• Maximum resistance
• 2-year warranty
02. APPLICATIONS
REFERENCE VOLTAGE COLOR
TLOF - G - AB 24V Green
TLOF - G - MB 230V Green
DIMENSIONS FATO - W - AB 24V White
FATO - W - MB 230V White
TLOF BASE - -
FATO BASE - -
03. CHARACTERISTICS
TLOF FATO
LUMINOUS
Luminous source Green LEDS White LEDS
MTBF 100 000 hours
ELECTRICAL
Voltage Available in 24V or 230V
Consumption < 6.5W < 12.5W
MECHANICAL
Mounting Full flush or semi-flush
SHALLOW BASE
Height / Width 52,5mm / 120mm
ENVIRONMENTAL
Humidity 100%
Frost -60°C
Wind speed 240 Km/h
CERTIFICATIONS
CE EN60947-1
CEI60364, NF C15-100
2014 / 35 / UE

HELIPORT EQUIPMENT
WHITE FLOODLIGHT
01. DESCRIPTION
The WHITE FLOODLIGHT is a light of 10.000 cd intensity with
multi-LEDs technology, developed with an aluminum design for
a natural fresh cooling system. It has been designed for an easy
installation.
02. ADVANTAGES
• Lifetime >10 years
• Multi – LEDs 04. CHARACTERISTICS
• Reflector for beam optimization LUMINOUS
• Shortened time of installation
Luminous Source LEDs
• No maintenance
Colour White
• 2-year warranty
• Integrated radiator for a natural cooling MTBF 100 000 hours
• One single bloc, with electronics embedded ELECTRICAL

• Protection Class: IP66 Tension 110-240V
• Frangible
Functioning
Temperature -55°C à +55°C
03. MODELS Consumption < 17 Watts max

MECHANICAL
P-TLOF-LED 110-240V Not included Not included
Body lamp material Aluminium
Lens Material Glass

DIMENSIONS Fixation M8 screw – On ground
Height 156 mm
Width 158.5 mm
Weight < 3 Kg
ENVIRONMENTAL
Humidity 100%
Frost -60°C
Wind Speed 240 Km/h
CERTIFICATIONS
EN60947-1
CE CEI60364, NF C15-100
2014 / 35 / UE
WARRANTY
OPTIONS
Solar Power Supply 

HELIPAD EQUIPMENT
PCL
RUNWAY LIGHTING REMOTE CONTROL BY RADIOFREQUENCY
01. DESCRIPTION
Our Pilot Control Lighting (PCL) system allows a remote control
of the ON/OFF of our beacons, dedicated to small airports and
helidecks. The system is provided with a push button feature that
the pilot will use on the radiofrequency of the helicopter or aircraft.
02. ADVANTAGES
• Quick and easy installation
• Integrated in a waterproof cabinet with electric protection
• Modular system
• Manual turn ON with dry contact available on terminal block
• Set up of the frequency through computer software
• Easy to use
03. APPLICATIONS
Our system allows to remote control the ignition of the runway
lighting through radiofrequency and is ICAO / FAA L854 compliant.
04. OPERATION
Our runway lighting control system has 3 outputs protected by a type
II circuit-breaker. In standard, 3 clicks on the pilot radio in less than
5 seconds initiates the beacon for a period of 15 minutes. The set of
functionalities is programmable via a PC software supplied with the
ELECTRICAL PCL kit.
Power supply 110V-240V

05. MODELS
Consumption < 15 Watts max REFERENCE POWER SUPPLY PHOTOCELL DRY CONTACT
MECHANICAL HELI-PCL 110-240V - Option
Body material Painted steel
Height 328mm
Width 330mm
Weight < 7 Kg
ACCESSORIES INCLUDED
Antenna +
antenna cable
2 meters
WARRANTY

HELIPORT EQUIPMENT
MORSE CODE HELIPAD LIGHT
LMIH
01. DESCRIPTION
The LEDEOMIH is a heliport white light, monobloc,
given LED technology. It offers significant advantages in
terms of lifetime (100 000 hours), sturdiness and energy
consumption. The ruling of the light can be achieved
through a deported command system (UPS, control
panel). The photocell for automatic night ignition and the
dry contact are both in option. Our heliport beacon gives
out series of 4 flashes, every 1.2 second (Morse H Code
– in standard other code are possible). Its compact design
facilitates its installation.
05. CHARACTERISTICS
LUMINOUS
02. ADVANTAGES
Horizontal beam spread 360° • Lifetime > 10 years
Vertical beam spread 0° to 10° • Multi-LEDs technology
Luminous Intensity > 1 700 Cd at 0° • Low Consumption
> 2 500 Cd between 1,5° & 2,5°
• No Maintenance
> 1 700 Cd between 3° & 4°
• 2-year warranty
> 750 Cd between 5° & 7°
> 250 Cd between 8° et 10° • Zamac box with epoxy paint
Flash frequency Morse H Code • Wiring on terminal block, cable gland output
MTBF 100 000 hours
ELECTRICAL
Voltage 240V AC / 50 Hertz
03. APPLICATIONS
Operating temperature -55°C to +55°C It is recommended to install a Morse Code Helipad Light
Current Imax In 230V: I < 500mA on a Heliport: When visual guidance on a long distance
Protection class IP66 is ruled necessary and when that visual guidance is not
MECHANICAL handled by other means. When it is difficult identifying the
Box material Zamac Helideck because of the surrounding lights.
Lens material Polycarbonate The heliport light will be placed on the helipad or next to it,
Mounting M8 screw (in option) preferably on a lifted point in a way that the pilots are not
dazzled at low distance.
Weight < 16 Kg
ENVIRONMENTAL
Humidity 100% 04. MODELS
Frost -60°C
Wind speed 240 Km/h REFERENCE VOLTAGE PHOTOCELL DRY CONTACT
CERTIFICATIONS
CE EN60947-1
LMIH00MB 110-240V Not included Not included
CEI60364, NF C15-100
2014 / 35 / UE
OACI Annex 14, Volume I, Chapter 5 LMIH11MB 110-240V Included Included
WARRANTY





Catalogue Complet en

Uploaded by

Copyright:

Available Formats

Catalogue Complet en

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Catalogue Complet en

Uploaded by

Copyright:

Available Formats

E IN FRA

OBSTRUCTION LIGHTING & NAVIGATION AIDS TO WARN OBSTACLE 12

ICAO RECOMMANDATIONS (ANNEX 14, CHAPTER 6) 14

LOW INTENSITY LIGHTS 18

MEDIUM INTENSITY LIGHTS 32

HIGH INTENSITY LIGHTS 46

POWER SUPPLY UNITS 50

NAVIGATION AIDS FOR HIGH VOLTAGE LINES 54

WIND DIRECTTION INDICATORS 60

LED PRODUCTS FOR AIRFIELD LIGHTING 66

LED PRODUCTS FOR HELIPADS & HELIDECKS 69

AAMB-10AF-75W 50 230V 48V 25 LBIA or 12 LBIB or 1LMIB/C

AAMB-10AF-500W 50 230V 48V 160 LBIA or 80 LBIB or 1LMIA or 6LMIB/C

AAMB-10AF-1000W 50 230V 48V 3 LMIA or 3LMIAB or 12 LMIB/C

AAMM-10AF 50 230V 230V TO BE DETERMINED ACCORDING TO THE INSTALLATION

AA-A400CO48-10AF 50 400V 48V 1 LMIA or 1 LMIAB or 6 LMIB or C

SAFEBOX Number of batteries Battery

SBMCBI4-10 52 230V/48V 4 7Ah 10 LBIA or 4 LBIB

SBMCBI8-20 52 230V/48V 4 12Ah 20 LBIA or 8 LBIB

SBMCMI1 52 230V/48V 4 24Ah 1 LMIA or 4 SMIB

SBMCMI2 52 230V/48V 8 24Ah 2 LMIA or 8 SMIB

SBMCMI3 52 230V/48V 4 100Ah 4 LMIA or 16 SMIB

SBMMMI1 52 230V/230V 4 24Ah 1 LMIA or 4 SMIB

SBMMMI2 52 230V/230V 8 24Ah 2 LMIA or 8 SMIB

SBMMMI3 52 230V/230V 4 100Ah 4 LMIA or 16 SMIB

BPLBIAR/B (or) 66 Red or Blue 1 x 12V 7Ah

WS60R-d12 56 • Red BPLBIAO 66 Orange 1 x 12V 7Ah

WS60R-d18 56 • Red Mini Portable Beacon

WS60R-d23 56 • Red BPMLBIAR1 66 Red 1 x 12V 1.2Ah

WS60R-d29 56 • Red BPMLBIAR2 66 Red 2 x 12V 1.2Ah

BPMLBIAW1 66 White 1 x 12V 1.2Ah

WS60O-d18 56 • Orange BPTRW 68 White

WS60O-d23 56 • Orange BPDIEDRE 68 Red and White

WS60O-d29 56 • Orange BR-COMP 68 Orange

ICAO WIND DIRECTION INDICATORS (STNA)

SIMPLE WIND DIRECTION INDICATORS

Delta-Box, the French manufacturer of aircraft warning lights, has been

DELTA BOX IN NUMBERS :

• More than 7,000 beaconing units shipped to 5 continents each year

Delta-Box‘s key strengths are in its recognised know-how, its reactivity

Reykjavik Airport HV Line

Cristo de las Novas

HV Line Marina Bay

Juventus Stadium Causeway bridge

Pioneer in the use of LED technology, DELTA BOX

Our commercial and technical departments work

• autonomous and safety power supplies such as

• speciﬁc types of lighting.

Airport Building Stack Structure

Wind Turbine Pylon HV Line Crane

ANNEX 14 – CHAPTER 6 – 7TH EDITION, JULY 2016

GENERAL PRINCIPLES & RECOMMANDATIONS

i By night, all obstacles must be beaconed with warning lights

• Low Intensity Lights for obstacles below 45 meters

• High Intensity Lights for obstacles above 150 meters

Peak Intensity (Cd) at given background luminance

Medium Intensity Light type A High Intensity Light type B

Medium Intensity Light type B Low Intensity Induction Light type A or B

Medium Intensity Light type A + Low Intensity Light type B