DRAN30/60 SERIES

AC - DC DIN RAIL MOUNTABLE POWER SUPPLY

INDUSTRIAL CONTROL EQUIPMENT

FEATURES
‧UNIVERSAL INPUT 85~264VAC
‧SHORT CIRCUIT PROTECTION
‧INTERNAL INPUT FILTER
‧3 YEARS WARRANTY

R R R

HH H
EN 61558-1

Class I, Div 2 UL 1310 UL 60950-1

EN 61558-2-16 a
IND. CONT. EQ.
UL 508 UL 62368-1 EN 62368-1

MODEL LIST
DRAN 60- 24 x
Wattage BLANK : SPRING TERMINAL TYPE
05 : 05V OUT 24 : 24V OUT A : SCREW TERMINAL TYPE
12 : 12V OUT 48 : 48V OUT

MODEL LIST
INPUT OUTPUT OUTPUT OUTPUT EFF. EFF.
MODEL NO. (min.) (typ.)
VOLTAGE WATTAGE VOLTAGE CURRENT
Single Output Models
DRAN30-05(A) 85~264 VAC 30 WATTS + 5 VDC 6A 77% 79%
DRAN30-12(A) 85~264 VAC 30 WATTS + 12 VDC 2.5 A 82% 84%
DRAN30-24(A) 85~264 VAC 30 WATTS + 24 VDC 1.25 A 83% 86%
DRAN30-48(A) 85~264 VAC 30 WATTS + 48 VDC 0.625A 83% 86%
DRAN60-05(A) 85~264 VAC 50 WATTS + 5 VDC 10 A 77% 79%
DRAN60-12(A) 85~264 VAC 60 WATTS + 12 VDC 5A 84% 86%
DRAN60-24(A) 85~264 VAC 60 WATTS + 24 VDC 2.5 A 86% 89%
DRAN60-48(A) 85~264 VAC 60 WATTS + 48 VDC 1.25 A 86% 89%

SPECIFICATION
All Specifications Typical At Nominal Line, Full Load, 25oC Unless Otherwise Noticed
GENERAL Conditions min. typ. max. unit
Characteristics Conditions min. typ. max. unit
Switching frequency Vi nom, Io nom 55 135 KHz
Isolation voltage Input-Output 3,000 / 4,242 VAC / VDC
Input-PE 1,768 / 2,500 VAC / VDC
Output-PE 500 / 710 VAC / VDC
Isolation resistance Input-Output, @ 500VDC 100 MΩ
Ambient temperature Operating at Vi nom -40 + 71 o
C
o o
Derating (see derating curve) Vi nom, from +61 C to +71 C 2.5 % / oC
Storage temperature Non operational -40 + 85 o
C
Relative humidity Vi nom, Io nom 20 95 % RH
Temperature coefficient Vi nom, Io min ± 0.03 % / oC

www.chinfa.com sales@chinfa.com
2024.02.26 P1
 DRAN30/60 SERIES
SPECIFICATION
All Specifications Typical At Nominal Line, Full Load, 25oC Unless Otherwise Noticed
GENERAL Conditions min. max. unit
Characteristics Conditions min. typ. max. unit
MTBF DRAN30 5V 612,000 Hours
Bellcore Issue 6 @40oC, GB 12V 640,000 Hours
24V 665,000 Hours
48V 675,000 Hours
DRAN60 5V 532,000 Hours
Bellcore Issue 6 @40oC, GB 12V 556,000 Hours
24V 580,000 Hours
48V 596,000 Hours
Altitude during operation EN 62368-1 5,000 m
Dimension Spring & Screw terminal type L90 x W40.5 x D114 mm
Cooling Free air convection
Installation position Vertical ( other direction may derating using )
Pollution degree 2

INPUT SPECIFICATIONS
Characteristics Conditions min. typ. max. unit
Rated input voltage Io nom 100 240 VAC
Absolute input max. range Ta min ... Ta max, AC in 85 264 VAC
Io nom DC in 90 375 VDC
Input current Vi : 115 / 230 VAC, Io nom DRAN30 560 / 330 mA
Vi : 115 / 230 VAC, Io nom DRAN60 1,060 / 590 mA
Rated input current Vi : 85 VAC, Io nom DRAN30 / 60 800 / 1,500 mA
Line frequency Vi nom, Io nom 47 63 Hz
Inrush current Vi : 115 / 230 VAC , Io nom DRAN30 20 / 40 A
DRAN60 30 / 60 A
Power dissipation DRAN30 / DRAN60 series 5V 8.5 / 12.5 W
Vi : 230 VAC, Io nom 12V 5.6 / 9.0 W
24V 5.5 / 8.8 W
48V 4.9 / 7.8 W
Leakage current Input-Output 0.25 mA
Input-PE 3.5 mA

OUTPUT SPECIFICATIONS
Characteristics Conditions min. typ. max. unit
Output voltage accuracy Vi nom, Io max 0 +1 %
(Adjusted before shipment)
Minimum load Vi nom 0 %
Line regulation Io nom, Vi min ...Vi max ± 0.5 %
Load regulation Vi nom, Io min ...Io nom ± 0.5 %
Voltage trim range DRAN30 & DRAN60 series 5V 5 5.5 VDC
Vi nom, 0.8 Io nom 12V 12 14 VDC
24V 24 28 VDC
48V 48 55 VDC
Rated continuous loading DRAN30 series 5V 6 A @ 5Vdc / 5.4 A @ 5.5 Vdc
Vi nom 12V 2.5 A @ 12Vdc / 2.1 A @ 14 Vdc
24V 1.25 A @ 24Vdc / 1.05 A @ 28 Vdc
48V 0.625 A @ 48Vdc / 0.54 A @ 55 Vdc
DRAN60 series 5V 10 A @ 5Vdc / 9.0 A @ 5.5 Vdc
Vi nom 12V 5 A @ 12Vdc / 4.25 A @ 14 Vdc
24V 2.5 A @ 24Vdc / 2.1 A @ 28 Vdc
48V 1.25 A @ 48Vdc / 1.08 A @ 55 Vdc
Hold up time Vi : 115 / 230 VAC , Io nom 20 / 30 ms
Turn on time Vi nom, Io nom 2,000 ms
Vi nom, Io nom with Capacitor load 2,000 ms

www.chinfa.com sales@chinfa.com
2024.02.26 P2
 DRAN30/60 SERIES
SPECIFICATION
All Specifications Typical At Nominal Line, Full Load, 25oC Unless Otherwise Noticed
OUTPUT SPECIFICATIONS
Characteristics Conditions min. typ. max. unit
Rise time Vi nom, Io nom 150 ms
Vi nom, Io nom with Capacitor load 500 ms
Fall time Vi nom, Io nom 150 ms
Transient recovery time Vi nom, 1~0.5 Io nom 2 ms
Ripple & noise Vi nom, Io nom, BW = 20MHz 50 mV
Power back immunity DRAN30 & DRAN60 5V 7.5 VDC
Vi nom, Io nom 12V 18 VDC
1 second 24V 35 VDC
48V 63 VDC
Capacitor load Vi nom, Io nom DRAN30 / 60 3,500 / 7,000 μF
DC ON indicator threshold Vi nom, Io nom 5V 3.5 4.5 VDC
at start up (Green LED) 12V 9.0 10.8 VDC
24V 18 21.6 VDC
48V 37 43 VDC
Efficiency Vi nom, Io nom, Po / Pi Up to 89%, See model list and typ efficiency curve

CONTROL AND PROTECTION

Characteristics Conditions min. typ. max. unit
Input fuse T2A / 250VAC internal
Internal surge voltage protection IEC 61000-4-5 Varistor
Rated over load protection Vi nom (see typ current limited curve) 110 150 %
Power Rdy (for 24V model only) Threshold voltage of contact closed (at start up) 18.8 19.6 VDC
Over voltage protection Vi nom, 0.8 Io nom (Auto Recovery) 5V 6.0 6.8 VDC
12V 15 16.5 VDC
24V 30 33 VDC
48V 60 66 VDC
Output short circuit Fold forward
Degree of protection IP20

APPROVALS AND STANDARDS

UL / cUL UL 508 Listed
UL 60950-1, UL 1310 Class 2 Power (only 5V and DRAN60-12(A) w/o Class 2) Recognized
ISA 12.12.01(Class I, Division 2, Groups A, B, C and D)
TUV EN 62368-1
EN IEC 61558-1, EN 61558-2-16 (meet EN 60204-1)
cTUVUs UL 62368-1
CE BS EN / EN 61000-6-3, BS EN / EN 55032 Class B, BS EN / EN 61000-3-2, BS EN / EN 61000-3-3
BS EN / EN 61000-6-2, BS EN / EN 55035, BS EN / EN 61000-4-2 Level 4, BS EN / EN 61000-4-3 Level 3
BS EN / EN 61000-4-4 Level 4, BS EN / EN 61000-4-5 L-N Level 3, L / N-FG Level 4
BS EN / EN 61000-4-6 Level 3, BS EN / EN 61000-4-8 Level 4, BS EN / EN 61000-4-11
DD ENV / ENV 50204 Level 2, BS EN / EN 61204-3, CISPR 32

CCC GB4943.1, GB/T9254.1, GB17625.1

Vibration resistance meet IEC 60068-2-6 (Mounting on rail : 10-500 Hz, 2G, along X, Y, Z each Axis, 60 min for each Axis )
Shock resistance meet IEC 60068-2-27 (15G, 11ms, 3 Axis, 6 Faces, 3 times for each Face)

PHYSICAL CHARACTERISTICS
Case size 90 x 40.5 x 114 mm (3.6 x 1.59 x 4.49 inches)
Case material Plastic
Weight DRAN30 : 270 g DRAN60 : 340 g
Packing DRAN30 : 0.35 kg ; 40 / 15 kg / 2.16 CUFT DRAN60 : 0.41 kg ; 40 / 17.5 kg / 2.16 CUFT

www.chinfa.com sales@chinfa.com
2024.02.26 P3
 DRAN30/60 SERIES
MECHANISM & PIN CONFIGURATION
mm [inch]
CONSTRUCTION
Easy snap-on mounting onto the DIN-Rail
(TS35/7.5 or TS35/15), unit sits safeIy and
40.50 [1.59] 40.50 [1.59] 114.00 [4.49] firmly on the rail.
54321 54321
INSTALLATION
Ventilation / Cooling
Normal convection
-- ++ Rdy -- ++ Rdy All sides 25mm free space
For cooling recommended
Vout ADJ. Vout ADJ. Connector size range
90.00 [3.60]
90.00 [3.60]

Spring terminal:
DC ON DC ON
AWG24-14 (0.2~2mm2 ) flexible / solid cable,
10 m/m stripping at cable end recommends
Screw terminal:
AWG26-12 (0.2~2.5mm2 ) flexible / solid cable,
connector can withstand torque at maximum 5
N L N L pound-inches.
4-5 m/m stripping at cable end recommends
Use copper conductors only, 60 / 75oC
6 7 8 6 7 8
GENERAL TOLERANCE
0.00[0.00] - 30.00[1.18] ±0.30[0.01]
30.00[1.18] - 120.00[4.72] ±0.50[0.02]

PIN ASSIGNMENT
PIN NO. Designation Description
1 RDY DC OK output for relay (not connect except 24V model)
2 + Positive output terminal
OUT

3 + Positive output terminal

4 - Negative output terminal
5 - Negative output terminal
6 Ground this terminal to minimize high-frequency emissions
IN

7 N Input terminals (neutral conductor, no polarity at DC input)

8 L Input terminals (phase conductor, no polarity at DC input)
Vout ADJ. Trimmer-potentiometer for Vout adjustment
OTHER

DC ON Operation indicator LED

Fig. 1 Rdy connection

RL > 700ohm

Rdy 2.2K
Rdy
0.5W

5.1V
- Vout 0.3W
- Vout
a ) Relay b ) 5V signal

CIRCUIT SCHEMATIC
‧Block diagram

L Fuse Vo +
Inrush Current
Line Switching
Limiter and Rectifier
Filter Device
Rectifier
N Vo -

PWM
Controller Opto - Reference &
Isolation Error Amp. Vout
Y ADJ.
Opto - Over Voltage
Isolation Detection
Y
DC ON
Output Level (Green LED)
1)
Detection RDY
Y (Open Collector)
Note: 1) for 24V Model Only
www.chinfa.com sales@chinfa.com
2024.02.26 P4
 DRAN30/60 SERIES
TYP. CURRENT LIMITED CURVE
DRAN30-24(A)
Output Voltage [ % ]

100

75
230 Vac
115 Vac
50

25

0
120 130 140 150 160 170 180 190
Output Current [ % ]

DRAN60-24(A)
Output Voltage [ % ]

100

75
230 Vac
115 Vac
50

25

0
110 120 130 140 150 160 170 180 190
Output Current [ % ]

DERATING CURVE

100
Power out [ % ]

75

Safe Operating Area

0
-40 61 71
o
Temperature [ C ]

TYP. EFFICIENCY CURVE

DRAN30-24(A) DRAN60-24(A)
95 95
90 90
85 85
80 80
EFFICIENCY [ % ]

EFFICIENCY [ % ]

75 75
70 70
65 65
60 60
55 230 Vac 55 230 Vac
50 115 Vac 50 115 Vac
45 45
40 40

10 25 50 75 100 10 25 50 75 100
Power out [ % ] Power out [ % ]

www.chinfa.com sales@chinfa.com
2024.02.26 P5