S-CONCRETE Version 7.02

S-CONCRETE Version 7.
02
© Copyright 2006 Softek Services Ltd.
Consultant Information
r
kassem
#100 - 1234 Anywhere Place
Ph: 555-1234 Fax: 555-4321
Concrete Section
Job # A123.45
_________________________________________________________________
American Building Standards

ACI 318-02, "Building Code Requirements for Structural Concrete"
ACI 318R-02, "Commentary for ACI 318-02"
Design Aids, Manuals, and Handbooks

Notes on ACI 318-02, Portland Cement Association 2002
"ACI Detailing Manual - 1994", ACI Committee 315, American Concrete Institute, 1994
"CRSI Handbook", Concrete Reinforcing Steel Institute, 1992
Summary
Status Acceptable
Maximum 1.000
V & T Util 0.000
N vs M Util 0.987
_________________________________________________________________
Section Dimensions Material Properties Quantities (approx.)

Rectangular Column fc' = 30 MPa Concrete = 2877 kg/m
b = 550 mm fy (vert) = 500.0 MPa Steel = 118 kg/m
h = 2200 mm fy (ties) = 413.7 MPa
Wc = 2403 kg/m3
Ws = 8009 kg/m3
Poisson's Ratio = 0.2
hagg = 19 mm
Es = 199948 MPa
Ec = 27572 MPa
Gc = 11488 MPa
fr = 3.41 MPa
Gross Properties Effective Properties

Zbar = 0 mm Ae = 1210.0xE3 mm2
Ybar = 0 mm Ie (y-y) = 488033xE6 mm4
Ag = 1210.0xE3 mm2 Ie (z-z) = 30502xE6 mm4
Ig (y-y) = 488033xE6 mm4 Ase (Y) = 806667 mm2
Ig (z-z) = 30502xE6 mm4 Ase (Z) = 806667 mm2
Ashear (Y) = 806667 mm2 Je = 102785xE6 mm4
Ashear (Z) = 806667 mm2
Jg = 102785xE6 mm4
_________________________________________________________________
1
Vertical Bars Ties Miscellaneous
550 x 2200 Column Y10 Ties @ 400 mm Clear Cover = 40 mm
26H25 Vert # Legs (Z-Direction) = 2
As = 12763 mm2 # Legs (Y-Direction) = 8
Rho = 1.05 %
Tangential Splice
_________________________________________________________________
Factored Input Loads

LC N (kN) T (kNm) Vz (kN) My (kNm) Vy (kN) Mz (kNm)
1 -5145.0 0.0 0.0 8085.0 0.0 0.0
Factored Design Loads (with Minimum Moments)

LC Vz (kN) My (kNm) Vy (kN) Mz (kNm) Mres (kNm) Theta
1 0.0 8085.0 0.0 0.0 8085.0 180?
_________________________________________________________________
N vs M Results Axial Utilization Moment Utilization

GLC #1 Nu = -5145.0 kN Mu = 8085.0 kNm Mn = 9039.8 kNm
Status Acceptable ONn (max) = -19193.8 kN OMn = 8193.5 kNm Mp = 9773.0 kNm
Utilization 0.987 Utilization = 0.268 Utilization = 0.987
Maximum 1.000
Theta 180?
_________________________________________________________________
Shear and Torsion Utilization

GLC = ---
Status = Acceptable
Utilization = 0.000
Maximum = 1.000
Vertical Steel Area As/Ag

As = 12763 mm2 1.05 %
As (min) = 12100 mm2 Acceptable 1.00 %
As (max) = 48400 mm2 Acceptable 4.00 %
_________________________________________________________________
Tie Spacing Tie Diameter

S = 400 mm Diam. = 10.0 mm
S (max) = 400 mm Diam. (min) = 9.5 mm
Status = Acceptable Status = Acceptable
_________________________________________________________________
Vertical Steel Area Status As/Ag Vertical Bar Splice Type

As 12763 mm2 1.05 % Tangential Splice
As (min) 12100 mm2 Acceptable 1.00 % Status = Acceptable
As (max) 48400 mm2 Acceptable 4.00 %
Vertical Bar Spacing Vertical Bar Diameter Minimum Number of Vertical Bars
Ny = 2 Specified db (vert) = 25.0 mm #Bars = 26 Specified
Ny (max) = 5.8 Allowed db (min) = 15.9 mm #Bars = 4 Required
Nz = 13 Specified Status = Acceptable Status = Acceptable
Nz (max) = 24.6 Allowed
Status = Acceptable
_________________________________________________________________
2
Vertical Reinforcing Horizontal Reinforcing
fy (min) = 275.8 MPa fy (min) = 275.8 MPa
fy (vert) = 500.0 MPa fy (horz) = 413.7 MPa
fy (max) = 551.6 MPa fy (max) = 413.7 MPa
Concrete Strength Concrete Density

fc' (min) = 17.2 MPa Wc (min) = 1441.7 kg/m3
fc' = 30.0 MPa Wc = 2402.8 kg/m3
fc' (max) = 68.9 MPa Wc (max) = 2482.9 kg/m3
_________________________________________________________________
British Reinforcing Bars

Index Bar Designation Diameter (mm) Area (mm2)
1 H6 / Y6 6.0 28.3
2 H8 / Y8 8.0 50.3
3 H10 / Y10 10.0 78.5
4 H12 / Y12 12.0 113.1
5 H16 / Y16 16.0 201.1
6 H20 / Y20 20.0 314.2
7 H25 / Y25 25.0 490.9
8 H32 / Y32 32.0 804.2
9 H40 / Y40 40.0 1256.6
10 H50 / Y50 50.0 1963.5
_________________________________________________________________
List of Messages
No Messages...
_________________________________________________________________

S-CONCRETE Version 7.02

Uploaded by

Copyright:

Available Formats

S-CONCRETE Version 7.02

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

S-CONCRETE Version 7.02

Uploaded by

Copyright:

Available Formats

S-CONCRETE Version 7.

American Building Standards

Design Aids, Manuals, and Handbooks

Section Dimensions Material Properties Quantities (approx.)

Gross Properties Effective Properties

Factored Input Loads

Factored Design Loads (with Minimum Moments)

N vs M Results Axial Utilization Moment Utilization

Shear and Torsion Utilization

Vertical Steel Area As/Ag

Tie Spacing Tie Diameter

Vertical Steel Area Status As/Ag Vertical Bar Splice Type

Concrete Strength Concrete Density

British Reinforcing Bars

You might also like