User Manual: Simpal-G4 3G Security Camera

SimPal-G4
3G Security Camera
User Manual
Manual version 1.3

SimPal-G4 3G Security Camera User Manual
FSimPal-G4 3G security Camera

Thank you for purchasing the SimPal camera. This camera is a remote controlled
image-capturing device consisting of a microphone, LED lights and a high quality 5
megal-pixel camera lens. The SimPal camera can capture images according to a
pre-programmed remote command and then send it to your multimedia messaging
(MMS) or e-mail via cellular network. You can control and change the camera settings
via SMS command.
MMS images sent from the SimPal camera can be viewed on your mobile phone. You
also can check the e-mail images in your mobile phone e-mail App.
The built-in high-light LED allows the camera to capture clear images even in dark
environment.
SimPal camera worked with encrypted 433MHz wireless sensors such as PIR-, door
magnet sensors. As soon as the wireless sensor triggers the camera alarm, you or your
families and/or your guards can thus receive the alarm message via SMS, MMS, Email
or standard calls, according to the pre-programmed. If you choose to purchase the
optional accessory -- an wireless siren, the SimPal camera can trigger the wireless
siren to emit loud voice when it alarms.
However, the camera can perform its duty well without any wireless sensor too. The
Camera has an integrated infrared body detector. It will therefore detect any
unauthorized entry into your house and notify you via SMS, MMS, standard calls or
E-mail.
All services and functions need to be supported by the GSM / WCDMA network and a
SIM card.
This brochure suits for SimPal-G4 model.
Details of the functioning and advanced operation of this camera are described in this
instruction manual.
2
CONTENTS
For your safety ........................................................................................................................... 5

Exception clause ....................................................................................................................... 5
Chapter 1 Structure instruction ........................................................................................................... 6
1.1 Package contents ................................................................................................................ 6
1.2 Products instructions ........................................................................................................... 6
1.4 Light indicator ...................................................................................................................... 7
Chapter 2 Installation .......................................................................................................................... 9
2.1 The antenna, temp sensor, SIM card and power adapter................................................... 9
2.2 The power adapter and battery ......................................................................................... 10
2.3 Install mounting bracket .................................................................................................... 11
2.4 Mounting the camera ......................................................................................................... 11
2.5 Power on/ off...................................................................................................................... 12
Chapter 3 Define the user and basic settings .................................................................................. 12
3.1 User authorization level ..................................................................................................... 12
3.2 Setup master number ........................................................................................................ 13
3.2.1 Register camera ........................................................................................................ 13
3.2.2 Change Master number ............................................................................................ 14
3.2.3 Change password ..................................................................................................... 14
3.3 Define User number .......................................................................................................... 14
3.3.1 Add User number ...................................................................................................... 14
3.3.2 Delete User number .................................................................................................. 14
3.4 Network parameter settings .............................................................................................. 15
3.4.1 MMS parameters setting ........................................................................................... 15
3.4.2 Cellular data parameters setting ............................................................................... 16
3.4.3 Email parameters setting .......................................................................................... 16
3.4.4Configure email SMTP parameters............................................................................ 16
3.4.5Configure receiving email address............................................................................. 17
Chapter 4 Operations and settings ................................................................................................... 18
4.1 Call the camera to listen in ................................................................................................ 18
4.2 Capture images ................................................................................................................. 18
4.2.1 Capture images to mobile phone .............................................................................. 18
4.2.2 Capture images to user’s E-mail address ................................................................. 18
4.2.3 Schedule send images .............................................................................................. 19
4.3 Arming or disarming SimPal camera ................................................................................. 20
4.3.1 Arming SimPal camera.............................................................................................. 20
4.3.2 Camera alarm............................................................................................................ 20
4.3.3 Disarming SimPal camera......................................................................................... 20
4.3.4 Schedule arming the camera .................................................................................... 20
4.5 Remote control .................................................................................................................. 21
4.5.1 Pair remote control .................................................................................................... 21
4.5.2 Remote control instruction ........................................................................................ 21
4.5.3 Un-pair remote control .............................................................................................. 22
3
4.6 PIR motion detection ......................................................................................................... 22
4.7 Wireless sensor accessories ............................................................................................. 22
4.7.1 Pair wireless sensor .................................................................................................. 22
4.7.2 Check sensor status.................................................................................................. 23
4.7.3 Removing sensor ...................................................................................................... 23
4.7.4 Temperature sensor .................................................................................................. 23
4.8 Image resolution ................................................................................................................ 23
4.9 Image quantity ................................................................................................................... 24
4.10 Beeper alert ..................................................................................................................... 24
4.11 SMS alert ......................................................................................................................... 24
4.12 Images alert ..................................................................................................................... 24
4.13 Voice call alert ................................................................................................................. 24
4.14 SMS alert to User ............................................................................................................ 25
4.15 Images alert to Users ...................................................................................................... 25
4.16 LED status indicator ........................................................................................................ 25
4.17 Night vision LED lights .................................................................................................... 25
4.18 Mains power failure alert ................................................................................................. 25
4.19 Unknown SMS forward .................................................................................................... 26
4.20 Check status .................................................................................................................... 26
4.21 Reboot the camera .......................................................................................................... 26
4.22 Reset to factory settings .................................................................................................. 26
Chapter 5 General troubleshooting .................................................................................................. 27
Chapter 6 Main technical parameters............................................................................................... 28
Appendix: SMS commands list ......................................................................................................... 29
4
1. Purchase a 3G SIM card (mobile phone card) from network service
operator and install it in the camera. This SIM card number is referred
as SimPal camera number on this brochure.
2. The user needs to activate the MMS, Cellular data functions and Caller
ID Presentation function of SIM card, and deactivate PIN code of the
SIM. Contact with GSM network service for support.
3. Change the original password at the beginning use. Be sure to keep
the password and SIM card number secret. Do not disclose this
information to anyone other than the authorized users in order to
ensure your safety.
For your safety

This product is a wireless signal transmission device. Keep it away from
electronic equipment likely to interfere with the wireless signals, in order to
avoid signals interference.
Switch off your SimPal camera and mobile phone when entering areas marked
"Explosive", "Might explode", "Closed wireless transceiver devices" etc.
Do not cast this product in a fire, as this may cause the battery to explode.
This product should only be operated from power approved by the product
manufacturer. The use of any other types of power may damage the product.
Keep the product and its accessories out of the children reach.
Exception clause
We operate on a policy of continuous development. We reserve the right to
make changes and improvements to any of the products described in this
document without prior notice.
For the latest product information, please visit: http://www.simpal.cn. We don’t
guarantee for the document veracity, reliability or any content except regulate in
proper laws. Including no guarantee for product suitable market or suitable
area promise.
Use only this product according to the law. Respect one another’s privacy.
Neither monitor another’s home nor private. We hold no responsibility for the
illegal use of this product.
We hold no responsibility for any loss of data or income; or any special,
incidental, consequential or indirect damages howsoever caused.
5
The contents of this document are provided “as is”. Except as required by
applicable law, no warranties of any kind, either expressed or implied, including,
but not limited to the accuracy, reliability or contents of this document. We
reserve the right to revise this document or withdraw it at any time without prior
notice.
Chapter 1 Structure instruction

1.1 Package contents
1. Remote camera 1 unit
2. Power adapter(12V/1A) 1 pcs
3. GSM antenna 1 pcs
4. Temperature sensor 1 pcs
5. User manual 1 pcs
6. Mounting bracket 1 set
7. Remote control and wireless sensor Optional
1.2 Products instructions
6
Figure 1: SimPal camera instructions

Tip: Keep the camera lens clean to insure best imaging quality.
1.4 Light indicator

Color Action Status
Flash slowly Searching the network.
Red Flash quickly Sensor alarm, infrared body detector alarm.
Constant Light Not installed SIM card, or the remote camera damaged.
7
Constant Light Armed status.

Arming command received. SimPal camera will enter
Flash twice per
arming mode after 20 seconds.
2 seconds
Green The camera is at the alarm-suspension situation.
Flash slowly Disarmed status.
Flash quickly Processing data.
Light 2 seconds Successfully reset factory setting, or loading sensor.
Orange Flash Loading remote control status.
Red and Two color lights
Loading sensor
Green alternately
Note: Slow flash 1 time per second, quick flash 2 times per second.
8
Chapter 2 Installation
2.1 The antenna, temp sensor, SIM card and power adapter
Installing the antenna

 Mount the supplied antenna into the Antenna Connector on the camera.
Installing the SIM card
 Remove the Battery Compartment Cover from the rare of SimPal camera and a
SIM card holder will be found.
9
 Open the SIM card holder.

 Insert the SIM card carefully into the card holder. Make sure that the golden
connectors on the card are facing downwards.
 Close the SIM card holder.
 Get back the Battery Compartment Cover of SimPal camera.
2.2 The power adapter and battery
Connecting to the power adapter
 Connect the plug to the power interface of the SimPal camera and then connect
the adapter to an AC power.
The built-in rechargeable Lithium battery

10
 The camera will notify the user when the power changes. For example, if the
power adapter is disconnected or failure of the AC power occurs, SimPal camera
will notify the user “External power cut. The device is operating on battery.”
 If SimPal camera is again connected to the external power, or the AC power is
available again, the notification will be sent to the user, i.e.” The device is now
resuming the use of external power source.”
 Low battery: The configure setting can not be saved when SimPal camera is
operating on low battery.
2.3 Install mounting bracket
 The camera has a bottom

bracket by which it can stand on the
table.
Fold-out stand
2.4 Mounting the camera

SimPal camera can be mounted on a wall (vertically with the screws) or put down on
any suitable horizontal surface.
How to choose the Installing place:
In order to capture better image quality, avoid any areas where bright light will
be irradiated directly into the lens of the camera on the camera.
In order to avoid backlighting photography, it is suggested that the camera is
located at the place where can look down the monitoring place with the
minimum angel 30°.
11
The GSM network’s signal strength may affect the image, live voice quality and
images transmission speed. Therefore, upon installation, the user should
ensure that SimPal camera is located in an area with a strong network signal.
After installation, the user should perform a test-run by taking several images
and sending it to the user’s mobile phone. This allows the user to check the
image quality of the camera. The position of SimPal camera can then be
adjusted until a satisfactory image quality level is reached.
2.5 Power on/ off

Power on:
Operation Indicator light Status
Red light on 1 seconds, then off
Turn the power 20 seconds..
switch to “On”
Red light flashing slowly for about
position.
5 seconds.
A “Beep…” tone will be heard.
Green light flash slowly, or SimPal camera is
green light be on constantly. disarmed, or armed.
Power off:
Turn the power switch to downside “Off” position.
Chapter 3 Define the user and basic settings

3.1 User authorization level
There are two levels, each with a different authorization level, namely Master,
Families.
Table 3.1 the difference in authority for Master, Families users:
User Type
Master Families
Functions
Change authority, password YES NO
Receive SMS YES YES
Receive MMS YES YES

Alarm
Receive alarm calling YES YES
Get images by E-mail YES YES
12
User Type
Master Families
Functions
Receive emergency calling YES YES
Call the camera to listen in live voice YES YES
Get images by sending SMS command YES YES
Get images by E-mail YES YES
Set remote camera by SMS command YES NO
Add, modify or delete sensor YES NO
 Note
 Any MMS enabled mobile phone can receive the images captured by SimPal
camera by sending SMS command with password.
 Any SMS enabled mobile phone can control SimPal camera with the password
command.
All the settings of SimPal camera can be set or adjusted via a SMS command.
About the SMS Command:
1） SMS command format: #code#content#.
2） The password must be a four-digit number.
3） The original password is 1234.
4） The maximum digits that are allows for the phone number is sixteen.
5） SimPal camera will reply to the user after it receives the SMS command.
 Note
 The “#” symbol must not be ignored when typing an SMS command.
 No allow any space within the commands.
3.2 Setup master number

Master user has all the rights of changing camera settings and receives alarm
messages from camera. In order to enable all the functions on the camera, the Master
user must store his/ her mobile number in the camera’s memory. Only one Master’s
mobile number (Master number) is allowed for a camera.
3.2.1 Register camera

SimPal camera is being used for the first time, or SimPal camera has been reset, the
13
master number need to be programmed into the camera, in order to ensure activation.
The following methods can be used:
Master send following SMS (text message) to camera from your mobile phone (the
phone number will be the Master number) to:
Setup master number: #00# (1)
If the camera reply master number already exists, please refer the Reset Factory
Setting parts to delete old master number.
3.2.2 Change Master number

Master user sends following SMS message in order to:
Change Master number: #14#NewMasterNumber# (2)
3.2.3 Change password

In order to ensure your privacy and safety during the use of this camera, change the
password once start to use SimPal camera.
Master user sends following SMS message to:
Change the password: #18#oldpassword#newpassword#
(3)
 The password is a four digit number.
 The original password is 1234.
3.3 Define User number

User number has the authority to listen in on the camera, capture images, and receive
notification when the integrated infrared body detector be triggered. User’s mobile
number and emails are set by the Master number. The User should remember and
safeguard the camera’s SIM number.
3.3.1 Add User number

Add User number: #07#User-mobile-number# (4)
 Up to 4 user numbers can be stored on one camera.
Add User email address: #07#User-e-mail# (5)
 Up to 4 user email email can be stored on one camera.
3.3.2 Delete User number

14
Delete user number: #27#user-mobile-number# (6)

Delete user e-mail: #27#user- e-mail#
Delete all user numbers and Emails: #27# (7)
3.4 Network parameter settings
3.4.1 MMS parameters setting

Camera already preset most operator MMS settings on the firmware. Users needn’t to
setup the MMS parameters. But if the GSM operator changes the MMS parameters or
the local MMS settings do not preset on the firmware, users will receive SMS when they
request MMS images: Sorry, the network is busy, MMS sending failed. Master number
can setup the MMS parameters manually by following two methods.
Method 1:
User sends following SMS to:

Auto select MMS setting from firmware: #54# (8)
Manual select MMS settings from firmware: #54#Network code# (9)
Network code is the MCC+MNC of this operator, such as 46001. If do not included
network code in this command, only send #54#, it will auto configure the setting
according SIM card MCC+MNC.
Method 2:
Six MMS parameters be requested on the camera. Master send following SMS
commands to camera.
Configure MMS parameter settings:

#25#MMSC#Proxy IP#ProxyPort#ProxyPort2#APN#Username#Pssaword#type# (10)
The command included parameters:

 MMSC means MMS center, for example: http://mmsc.
 Proxy IP: The IP address for MMS, For example: 139.7.29.17
 Proxy Port: for example:9201 or 80
 Proxy Port2: for example: 80 or 8080
 APN
 User Name
 Password
15
 Type: name is this setting, normally the type is “mms”
If the User name and Password is empty, only leave blank and separate with #.
Get the current operative network parameter settings: #25# (11)
3.4.2 Cellular data parameters setting

Camera already preset most operator cellular data settings in firmware, but if can not
connect the network, user can set up the GPRS parameters manually.
Method 1:
Manual select from another list of firmware, Master send following SMS to
Manual select Cellular data settings: #54# (8)
Method 2:
SMS command configure Cellular data (GPRS) parameter settings:
#24#APN#Username#Password#MCC#MNC# proxy#port#type# (12)
For example: #24#live.vodafone.com###505#03##80#default#
If the User name and Password is empty, only leave blank and separate with #.
Normally the type is “default”.
Check Cellular data (GPRS) parameter settings: #24# (13)
3.4.3 Set-up e-mail

SimPal camera support SMTP protocol sending images e-mail, need to set-up
outbound email account and receipt email account. Images e-mail sender will be
outbound email; receiver will be receipt e-mail. Suggest to set both outbound and
receipt same e-mail address, it will lower chance of e-mail delay.
3.4.4Configure outbound e-mail

#26#e-mail#password#SMTP#SMTP port#Type#tls# (14)
16
E-mail: The email address is use to sending e-mail,

Password: This is the password to log in email account, need to fill with letter or
number.
SMTP: Simple Mail Transfer Protocol. Request activate e-mail SMPT service by
log-in web and check e-mail settings.
SMTP port: the port for SMTP.
Type: setting email SMTP or SMTPS protocol. 0 means SMTP, 1 means SMTPS.
Tls: this is encryption of hotmail and outlook, only hotmail or outlook need to activated
this function. 0 means deactivated TLS, 1 means activated TLS.
Some e-mail setting as following:

 Gmail: the SMTP port is 465, and need to select SMTPS, deactivated TLS.
#26#simpaltest@gmail.com# PASSWORD#smtp.gmail.com#465#1#0#
 Outlook, Hotmail: the SMTP port is 587, and select SMTP, activated TLS.
#26#sim.pal@outlook.com#PASSWORD#smtp.live.com#587#0#1#
 Company email: It need to switch the SMTP server to IP address, and select SMTP,
deactivated TLS.
#26#sales@simpal.cn#PASSWORD#218.85.138.181#25#0#0#
It will send one confirm email after configure the sending email successfully.
Two public testing e-mail accounts can be use on your camera, the setting details as
following:
Testing e-mail 1:
#26#gsmcam@qq.com#simpal509#smpt.qq.com#465#1#0#
Testing e-mail 2:
#26#alarmcam@qq.com#509alarmcam#smpt.qq.com#465#1#0#
Check email SMTP parameters: #26# (15)

It will reply current email settings by sending this command.
3.4.5Configure receiving email address

Master sending following SMS to set email address which use to receive alarm from
17
camera. Only allow to set one email for master number.
Configure receiving email address: #09#email# (16)

Delete email address: #09# (17)
Chapter 4 Operations and settings

4.1 Call the camera to listen in
Master or Users calls SimPal camera number, it will answer calling automatically. Then
you can listen in the live audio of the monitoring area. Only one line can be connected
to SimPal camera at a time.
4.2 Capture images

Authority:
Master/ User send SMS to the camera to get the image and send by MMS or email.
4.2.1 Capture images to mobile phone

Method ：
The user sends following SMS message in order to:
Capture image and send to the user mobile by MMS:
For Master and Users： #03# (18)
Capture one image and send to other user number:
For Master: #03#Phone-Number# (19)
4.2.2 Capture images to user’s E-mail address

Need to configure email settings before using this function. The camera will sending
images email via Cellular data. It will charge cellular data cost by network operator.
Capture image and send to user email: #05# (20)

Capture image and send to other email address #05#email# (21)
18
4.2.3 Schedule send images

Master sends following SMS message in order to:
Set schedule to auto-send images parameters:
#43#Mode#WorkDay#StartTime#EndTime#IntervelTime#. (22)
 Mode: the parameter is 0 and 1, 0 means sending images to email, 1
means sending images by MMS.
 WorkDay: one digit, the values lie in the range of “0” to “9”.
The following table contains the descriptions of each value:
Value Corresponding day
0 Everyday
1 Monday
2 Tuesday
3 Wednesday
4 Thursday
5 Friday
6 Saturday
7 Sunday
8 Monday to Friday
9 Weekend
 StartTime and EndTime: Be consists of 4 digits (hh:mm) and works on a 24

hour clock. For example: 0000 means time 00:00(hh:mm), 2359 means time
23:59(hh:mm). the EndTime can be earlier than StartTime, it will set as end of
next day.
 IntervalTime: This consists of 2 or 3 digits and has values in the range of “5” to
“480” minutes.
For example: #43#0#0#2100#0800#10# The camera will reply SMS following:
Schedule capture images function: OFF
Receive mode: Email
Everyday
Time: 21:00-08:00
Interval: 10 minutes.
Activate schedule send images: #06#1# (23)
Master sending this command to activate Schedule sending images functions.
Deactivate schedule send images: #06#0# (24)
19
4.3 Arming or disarming SimPal camera
4.3.1 Arming SimPal camera

 When user arm the SimPal camera, the built-in infrared body detector (PIR) will
start working and detecting body heat. SimPal camera will automatically send
alarm message or making a phone call once it be triggered.
 SimPal camera has 30 seconds alarm-suspension period after it be armed. The
user can leave the camera place during this time to avoid misalarm.
Method 1:
Arming SimPal camera manually: #01# (25)
Method 2:
Master or User number calling the camera number, hand up before it answer the calling.
By this method, camera will switch from Arm and Disarm mode.
4.3.2 Camera alarm

Once the camera be triggered, the LED will flash fast in green, then turn red and flash
fast. It will sending alarm SMS, MMS, Email or make voice calling according to the
setting. After it finish alarm process, camera will enter 30 seconds alarm-suspension
period and then it can alarm again.
4.3.3 Disarming SimPal camera

SimPal camera in disarm mode, all loaded Normal wireless sensor, built-in infrared
body detector will not working. 24 Hours sensor and remote control still working in
disarm mode.
Method 1:
Disarming SimPal camera manually: #02# (26)
Method 2:
Calling the camera, hand up before it answer the calling. It will send SMS to notify
camera Disarm.
4.3.4 Schedule arming the camera

Enable schedule arms the camera: #04#1# (27)
Set time period to arm the camera:
20
#41#WorkDay#StartTime#EndTime#
(28)
Disable schedule arm the camera: #04#0# (29)
 WorkDay: The value description is same with command 21.
 StartTime and EndTime: Be consists of 4 digits (hh:mm) and works on a 24

hour clock. For example: 0000 means time 00:00(hh:mm), 2359 means time
23:59(hh:mm). the EndTime can be earlier than StartTime, it will set as end of
next day.
4.5 Remote control
4.5.1 Pair remote control

User can buy Remote control separately and use with SimPal camera, remote control
to arm, disarm or make emergency alarm by pressing remote control buttons, user
should pair remote control before use. A camera can pair up to 5 remote controls.
Camera indicator Operations Status
Green, flashing or 1. Press and hold the Reset Indicator light turns to orange
constantly light. key for 2 seconds (Learning mode)
2. Press any button on the
SimPal will emit a “Beep” tone
remote control (with battery
Orange, flashing and indicator will turn green for
inside) to send a signal to
2S. (Added successfully.)
SimPal.
3. Repeat step2 to load
Orange, flashing
another new remote control.
4. Press the Reset key to exit Indicator light turns green,
Orange, flashing the learning mode or waiting flashing or constantly light. (Exit
for 15 seconds to auto-exit. learning mode)
4.5.2 Remote control instruction

There are three buttons on the remote control:
A. Arm SimPal camera :When is pressed, the indicator light on SimPal

camera will turn green. This indicates that SimPal camera is in armed mode.
B. Disarm SimPal camera :When is pressed, the indicator light on SimPal

camera will slowly flash green. This indicates that SimPal camera is in disarmed mode.
21
C. Emergency button :When is pressed, the indicator light on SimPal

camera will rapidly flash green. Then SimPal camera will dial the master user’s number.
Live audio stream can be heard upon answering the emergency call.
4.5.3 Un-pair remote control

Remove all remote controls from the camera: #29# (30)
4.6 PIR motion detection

Activate built-in infrared body detector (default): #17#1# (31)
Deactivate built-In infrared body detector: #17#0# (32)
4.7 Wireless sensor accessories

Optional 433MHz wireless sensor, such as wireless PIR detector, wireless door magnet,
wireless smoke detector etc. can be set as an alarm sensor of the camera. Up to 15pcs
wireless sensors and wireless panic buttons can be pair with SimPal camera.
There are two types wireless sensor for camera:
Alarm sensor: sensor only alarm when the camera in arm mode, normally, door sensor,
infrared sensors work as alarm sensor.
Emergency sensor: sensor will always alarm once the sensor triggered even the
camera disarm, normally smoke detector, gas detector, panic button work as
emergency sensor.
4.7.1 Pair wireless sensor

1. Power on the wireless sensor.
2. Master sends following SMS message to make SimPal camera enter loading
mode:
Pairing Alarm sensor: #08#1#Sensor-name# (33)
Pairing Emergency sensor: #08#2#Sensor-name# (34)
 Sensor-name is used for identify different sensors affiliated with each camera. It
can be numbers and letters.
 Up to 9 characters can be included in the Sensor-name.
 Sensor alarm way will be same as built-in PIR motion sensor setting.
3. When SimPal camera received the SMS command, it will emit a BEEP tone and
the indicator will flash red and green alternately. SimPal camera will then send a
22
notification SMS to request trigger wireless sensor.

4. Make the sensor work and transmit signal to be studied by SimPal camera.
5. When SimPal camera receives the sensor signal, it will emit a Beep tone and
send a notification message via SMS: *** sensor paired successfully.
4.7.2 Check sensor status

Master sends following SMS message to SimPal camera:
Check paired sensors: #08# (35)
Camera will reply SMS and list all sensors which already paired with this
camera.
4.7.3 Removing sensor

Master sends following SMS message to SimPal camera:
Remove one sensors: #28#Sensor-name# (36)
Remove all sensors: #28# (37)
 Sensor-name should be the existing sensor which the user wants to remove.
4.7.4 Temperature sensor

A range of temperature can be pre-set onto the camera. In this case, if the
surroundings temperature is detected out of the pre-set temperature range, the SimPal
camera will auto-send the SMS alarm message to user’s mobile phone.
This feature depends on the temperature sensor.
The Master sends following SMS message in order to:
Check temperature reading: #15# (38)
Activate temperature monitoring: #15#1# (39)
Set limits of temperature: #16#MinTemp#MaxTemp# (40)
 MinTemp and MaxTemp: The values can be set within the range of -10 to 50
centigrade degree.
Deactivate temperature monitoring: #15#0# (41)
4.8 Image resolution

The Master sends following SMS message to SimPal camera in order to:
Change the image size: #22#value# (42)
 If the value is 1, the image size is 320 ×240(pixels). It’s for a standard small
screen mobile phone. The size of one MMS image file is about 35K.
23
 If the value is 2, the image size is 800×480(pixels). The size of one MMS image
file is about 65K.
 If the value is 3, the image size is 1280 × 768(pixels). The size of one image file
is about 170K.
4.9 Image quantity

The Master sends following SMS message to SimPal camera in order to:
Set image quantity at alarm: #21#quantity# (43)
Quantity can be 1-5 images. All images will display in one MMS or one e-mail content.
4.10 Beeper alert

SimPal camera will emit a Beep tone upon alarm activation. The Master sends
following SMS message to SimPal camera in order to set:
Activate beep alert: #30#1# (44)
Deactivate beep alert (Default): #30#0# (45)
4.11 SMS alert

The Master sends following SMS message to SimPal camera in order to set:
Activate SMS alert upon alarm triggering: #11#0# (46)
Deactivate SMS alert upon alarm (Default): #11#1# (47)
4.12 Images alert

Activate MMS alert upon alarm triggering(Default): #12#1# (48)
Activate e-mail alert upon alarm triggering: #12#2# (49)
Deactivate images alert: #12#0# (50)
4.13 Voice call alert

Deactivate voice call alert upon alarm triggering(Default): #13#0# (51)
Activate voice call alert upon alarm triggering: #13#1# (52)
SimPal camera will call the Master and User’s numbers for not more than 3 times. If it
is still no one answers the call, SimPal camera will then exit dialing mode automatically.
24
4.14 SMS alert to User

Master sends following SMS message to SimPal camera in order to set:
Activate SMS alert to Users: #32#0# (53)
Deactivate SMS alert to Users (default): #32#1# (54)
4.15 Images alert to Users

Activate images alert to Users: #33#1# (55)
Deactivate images alert to Users (Default): #33#0# (56)
The images notification may be MMS or Email images, the setting depend on camera
setting, If Master set alarm with MMS, it will send MMS to Users , if Master set alarm
with Email, it will sending e-mail images to Users.
4.16 LED status indicator

LED status indicator will display in different ways to show the working status. It can be
turns off to make SimPal camera private and avoid to be found easily.
Turn off LED status indicator: #31#0# (57)
Turn on LED status indicator (Default): #31#1# (58)
4.17 Night vision LED lights

There are 10pcs LED light help lighting when capture images in dark environment.
Master sending following SMS to set
Night vision LED lighting: #20#mode# (59)

Mode represent LED working mode, There are three mode of LED lighting:
1 means “Auto mode”, LED will auto turn on when camera detect dark environment.
2 means “Constantly ON”, LED will always lighting when camera make photo
shooting.
0 means “OFF”. LED will always OFF
4.18 Mains power failure alert

The Master sending following SMS to set
25
Activate SMS alert at power failure (default): #35#1# (60)

Deactivate SMS alert at power failure: #35#0# (61)
4.19 Unknown SMS forward

The camera default sending unknown SMS to Master number, Master can receive SMS
about the camera SIM card credit change from operator.
Activate unknown SMS forward (default): #50#1# (61)

Deactivate unknown SMS forward: #50#0# (62)
4.20 Check status

Check the present settings and work status of SimPal camera:
 For master and Users: #10# (63)
Check firmware, IMEI and GSM signal of SimPal camera:

For Master user: #40# (64)
4.21 Reboot the camera

The network cellular data sometimes unable to connect, it needs to restart the camera
to initialize network settings. The maser sendings following SMS message in order to:
Reboot the camera: #42#password# (65)
4.22 Reset to factory settings

You can reset the camera to factory setting if forgot the master number or camera do
not work normally.
After reset factory setting, camera will delete all settings; you need to setup master
number from beginning.
Method 1: Reset by pressing setting button
 Make SimPal camera in working mode and registered network.
 Remove the battery cover; the setting button is near the DC power connector.
 Keep pressing the setting button for 5 seconds, camera will beep ring..
 Then the camera reset to factory setting successfully.
Method 2: Reset by SMS command
26
Master sends following SMS message to SimPal camera in order to:

Reset the camera: #19#password# (66)
Reset MMS, data and e-mail settings:

Master sending following SMS message to reset camera advanced settings, it will
clean all storage setting and reset MMS, data and e-mail related settings. After this
command, User may need to set up network, MMS and e-mail parameters again. Use
this command with caution, request to connect external power, this command will make
camera system initialization, do not allow to turn off camera during initialization, it may
destroy camera system and make camera not working. Camera indicator will stay in
constant RED for 10 minutes before return to normal status. After 10 minutes, if the
camera still is not working, need to manually reboot camera.
Reset MMS, data and e-mail settings: #49#password# (67)
Chapter 5 General troubleshooting
No. General Trouble Possible Reason Solution

Can’t start camera Other master is already set in the Reset to factory default
1
(Indicator is working) camera. setting.
Caller ID presentation or MMS,
Contact network provider to
All functions disable Cellular data functions of the SIM
2 active SIM card function. Pay
(Indicator is working) card do not active, insufficient fee of
for the card.
the SIM card.
SIM card no install properly:
Indicator constant light
3 Can’t find or identify the SIM card. Power off the camera and
in red color.
check it again.
Camera didn’t Switch off the power, check
4 response of any SimPal camera work abnormally. SIM card, or reset factory
operation. setting.
Place the camera at other
Network signal weak or network
After starting the place with strong signal and
busy.
camera, indicator try again.
5 flashed in red color
SIM card PIN code actives. Close the PIN code.
and can not turn to
green. Contact with local operator to
SIM card invalid.
check of it.
Remote control can’t Connect external power to
Camera low power.
work. Or action slowly. recharge the battery.
6
Or control distance Change remote control
Remote control low power.
range shortened. battery.
27
No. General Trouble Possible Reason Solution
Two remote controls work
Try only one remote control.
simultaneously.
The remote control or sensor
Exit the loading status.
already studies successfully.
Can’t add new remote
The sensor quantity is already Delete old sensors before add
7 control or wireless
reaches its max number. new sensor.
sensor
Didn’t set master user number Set master number before
add sensor.
Can’t start the camera Battery runs out of power. Connect the camera to
after long time supply external AC power and charge
8
with the battery. for at least one hour, then,
restart camera.
Note: If the problem can’t be solved with above guidelines, contact to your local
distributor or after service center.
Chapter 6 Main technical parameters

Power adaptor Input: 100V～240V/50Hz Output: 12V 1A DC
Operating temperature -10℃～+45℃
Store temperature -20℃～+60℃
Relative humidity 10-90%，without condensation
Working band GSM 850/900/1800/1900MHZ WCDMA /HSUPA 2100MHz
(850/1900 Mhz Optional)
Wireless sensor receiving band 433MHz
Max. wireless sensors 15 units
Remote control receiving band 433MHz
Effective distant of the remote control 20 meters (wide area)
Image format JPEG
Image resolution 320×240, 800×480, 1280×768
Camera pixel 5.0 Megal pixel
Camera Shooting angel 68 degree
Best shooting distance at night ≤5meters
Detect distance of build-in PIR sensor ≤5 meters
Listen in distance ≤5meters
Lithium battery (Inner) 1200mAh
Battery standby time 12 hours（Affected by network）
28
Appendix: SMS commands list

Authori
Category Function Command
zation
Register camera (1) #00# Master
Change Master number (2) #14#NewMasterNumber# Master
Change password (3) #18#oldpassword#newpassword# Master
Define the Add User number (4) #07#User-number# Master
user Add User e-mail (5) #07#E-mail#
Delete User number (6) #27#User=number# Master
Delete all User number and
(7) #27# Master
e-mail
Manual select MMS and
(8) #54#
data settings
Select certain network
(9)#54#MCC+MNC#
setting
(10) #25#MMScenter#
Network Manual set MMS parameters ProxyIP#ProxyPort#ProxyPort2#APN#Usernam Master
parameter e#Password#mms#
settings Check MMS parameters (11) #25# Master
(12)
Set Cellular data parameters #24#APN#Username#Password#MCC#MNC#p Master
roxy#port#default#
Check Cellular data
(13) #24# Master
parameters
Set outbound e-mail (14) #26#email#password#STMP#SMTP
Master
parameters port#SSL#tls#
Email Check e-mail parameters (15) #26# Master
settings Set receipt e-mail account (16) #09#email# Master
Delete receipt e-mail
(17) #09# Master
account
Master
Request image by MMS (18) #03#
User
Send MMS image to other Master
Capturing (19) #03#number#
phone number User
images
Request image via e-mail (20) #05# Master
Send image e-email to other Master
(21) #05#Email#
e-mail address User
(22)
Schedule Set calendar send images #43#Mode#WorkDay#StartTime#EndTime#Inte Master
send rvelTime#
images Activate calendar image
(23) #06#1# Master
function
29
Authori
zation
Deactivate calendar images
(24) #06#0# Master
function
Master
Arm camera (25) #01#
User
Master
Disarm camera (26) #02#
Arming or User
disarming Activate calendar arm
(27) #04#1# Master
SimPal camera
camera Set calendar arm camera
(28) #41#WorkDay#StartTime#EndTime# Master
parameters
Deactivate calendar arm
(29) #04#0# Master
camera
Remote
Un-pair remote control (30) #29# Master
control
Activate PIR motion
Infrared (31) #17#1# Master
detection (default)
body
Deactivate PIR motion
detector (32) #17#0# Master
detection
Pairing alarm sensor (33) #08#1#sensor# Master
Pairing emergency sensor (34) #08#2#sensor# Master
Check paired sensor (35) #08# Master
Un-pairing wireless sensor (36) #28#sensor# Master
Un-paring all sensors (37) #28# Master
Wireless Master
Check temperature reading (38) #15#
sensor User
Activate temperature
(39) #15#1# Master
monitoring
Set limits of temperature (40) #16#MinTemp#MaxTemp# Master
Deactivate temperature
(41) #15#0# Master
monitoring
Image resolution (42) #22#value# Master
Image
Image quantity (43) #21#quantity# Master
Activate beeper alert (44) #30#1# Master
Deactivate beeper alert
(45) #30#0# Master
(default)
Alarm Deactivate SMS alert (46) #11#0# Master
settings Activate SMS alert (default) (47) #11#1# Master
Activate MMS alert (default) (48) #12#1# Master
Activate e-mail alert (49) #12#2# Master
Deactivate image alert (50) #12#0# Master
Calling Deactivate voice call alert (51) #13#0# Master
30
Authori
zation
alarm (default)
setting Activate voice call alert (52) #13#1# Master
Deactivate SMS alert to
(53) #32#0# Master
Users (default)
User alert Activate SMS alert to Users (54) #32#1# Master
function Activate images alert to
(55) #33#1# Master
setting Users
Deactivate images alert to
(56) #33#0# Master
Users (default)
Deactivate LED status
(57) #31#0# Master
Indicator indicator
light Activate LED status indicator
(58) #31#1# Master
(default)
Night vision Set night vision LED lighting
(59) #20#mode# Master
LED setting mode
Activate SMS alert at power
Mains (60) #35#1# Master
failure (default)
power
Deactivate SMS alert at
faialure alert (61) #35#0# Master
power failure
Activate unknown SMS
Unknown (62) #50#1# Master
forward (default)
SMS
Deactivate unknown SMS
forwarding (63) #50#0# Master
forward
Check status (64) #10# Master
Check
Check firmware version,
status (65) #40# Master
IMEI and network signal
Reboot Reboot camera (66) #42#password# Master
Reset Reset factorysettings (67) #19#password# Master
factory Reset MMS, data and e-mail
(68) #49#password# Master
setting settings
31

User Manual: Simpal-G4 3G Security Camera

Uploaded by

Copyright:

Available Formats

User Manual: Simpal-G4 3G Security Camera

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

User Manual: Simpal-G4 3G Security Camera

Uploaded by

Copyright:

Available Formats

SimPal-G4

Manual version 1.3

FSimPal-G4 3G security Camera

This brochure suits for SimPal-G4 model.

For your safety ........................................................................................................................... 5

For your safety

Chapter 1 Structure instruction

1.2 Products instructions

Figure 1: SimPal camera instructions

1.4 Light indicator

Red Flash quickly Sensor alarm, infrared body detector alarm.

Constant Light Armed status.

Installing the antenna

Installing the SIM card

 Open the SIM card holder.

2.2 The power adapter and battery

Connecting to the power adapter

The built-in rechargeable Lithium battery

2.3 Install mounting bracket

 The camera has a bottom

2.4 Mounting the camera

2.5 Power on/ off

Chapter 3 Define the user and basic settings

Receive SMS YES YES

Receive MMS YES YES

Get images by E-mail YES YES

Call the camera to listen in live voice YES YES

Get images by sending SMS command YES YES

Get images by E-mail YES YES

Set remote camera by SMS command YES NO

Add, modify or delete sensor YES NO

3.2 Setup master number

3.2.1 Register camera

3.2.2 Change Master number

3.2.3 Change password

3.3 Define User number

3.3.1 Add User number

3.3.2 Delete User number

Delete user number: #27#user-mobile-number# (6)

3.4 Network parameter settings

3.4.1 MMS parameters setting

User sends following SMS to:

Configure MMS parameter settings:

The command included parameters:

3.4.2 Cellular data parameters setting

Manual select Cellular data settings: #54# (8)

Check Cellular data (GPRS) parameter settings: #24# (13)

3.4.3 Set-up e-mail

3.4.4Configure outbound e-mail

E-mail: The email address is use to sending e-mail,

Some e-mail setting as following:

Check email SMTP parameters: #26# (15)

3.4.5Configure receiving email address

camera. Only allow to set one email for master number.

Configure receiving email address: #09#email# (16)

Chapter 4 Operations and settings

4.2 Capture images

4.2.1 Capture images to mobile phone

4.2.2 Capture images to user’s E-mail address