Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 325 views

    Test Report For: CT Primary Injection Test

    Uploaded by

    Ahmed Fathy
    This document summarizes the results of a CT primary injection test on bay W502 of the Toshka 3 GIS substation. The test was performed according to approved schematics and involved injecting 300A of current into the CT cores and measuring the secondary readings. Core 1 is used for distance protection, Core 2 is used for bus bar and backup protection, and Core 3 is used for metering. Secondary readings were taken for each core and phase and found to match the injected primary current within the specified tolerances.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd

    Test Report For: CT Primary Injection Test

    Uploaded by

    Ahmed Fathy
    325 views4 pages
    This document summarizes the results of a CT primary injection test on bay W502 of the Toshka 3 GIS substation. The test was performed according to approved schematics and involved injecting 300A of current into the CT cores and measuring the secondary readings. Core 1 is used for distance protection, Core 2 is used for bus bar and backup protection, and Core 3 is used for metering. Secondary readings were taken for each core and phase and found to match the injected primary current within the specified tolerances.

    Original Title

    D07

    Copyright

    © © All Rights Reserved

    Available Formats

    DOCX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document summarizes the results of a CT primary injection test on bay W502 of the Toshka 3 GIS substation. The test was performed according to approved schematics and involved injecting 300A of current into the CT cores and measuring the secondary readings. Core 1 is used for distance protection, Core 2 is used for bus bar and backup protection, and Core 3 is used for metering. Secondary readings were taken for each core and phase and found to match the injected primary current within the specified tolerances.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    325 views4 pages

    Test Report For: CT Primary Injection Test

    Uploaded by

    Ahmed Fathy
    This document summarizes the results of a CT primary injection test on bay W502 of the Toshka 3 GIS substation. The test was performed according to approved schematics and involved injecting 300A of current into the CT cores and measuring the secondary readings. Core 1 is used for distance protection, Core 2 is used for bus bar and backup protection, and Core 3 is used for metering. Secondary readings were taken for each core and phase and found to match the injected primary current within the specified tolerances.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    of 4

    Main Contractor: Owner: Consultant: Project Name:

    Toshka 3 (220/66/22 KV) GIS S/S


    Date: Page:
    SEP, 2021 1 of 4
    Vendor: Document Number:

    Sieyuan
    Title.

    CT PRIMARY INJECTION TEST

    Test Report

    for

    220 KV GIS CT Primary Injection

    Company MADKOUR WITNESSED BY (EETC)


    Name
    Signature
    Date
    Main Contractor: Owner: Consultant: Project Name:
    Toshka 3 (220/66/22 KV) GIS S/S
    Date: Page:
    SEP, 2021 2 of 4
    Vendor: Document Number:

    Sieyuan
    Title.

    CT PRIMARY INJECTION TEST

    Bay: W502 (AL ALMAIN-1)


    Test Procedure:
     Check that all circuits are closed and tightened.
     Inject primary current on the CT terminals.
     Take the secondary readings on each circuit.
     Check core identification by shorting each core and check absence of secondary
    current on the circuit.
     All the mentioned measuring points are according to the approved schematics.

    Core No. CT Ratio Class


    1 1250-2500/1 0.5M5
    2 1250-2500/1 5P30
    3 1250-2500/1 5P30
    4 1250-2500/1 5P30

    Company MADKOUR WITNESSED BY (EETC)


    Name
    Signature
    Date
    Main Contractor: Owner: Consultant: Project Name:
    Toshka 3 (220/66/22 KV) GIS S/S
    Date: Page:
    SEP, 2021 3 of 4
    Vendor: Document Number:

    Sieyuan
    Title.

    CT PRIMARY INJECTION TEST

    CORE-1: Used for Distance Protection Relay


     Injected Current = 300 A

    Measured
    Phase Reading in Relay (F301)
    Current (A)
    R I1
    S I2
    T I3
    N N

    CORE-2: Used for Bus Bar and Backup Protection


     Injected Current = 300 A

    Measured Reading in Relay Measured


    Phase Reading in Relay (A301)
    Current (A) (A201) Current (A)

    R I1 I1
    S I2 I2
    T I3 I3
    N N N

    Company MADKOUR WITNESSED BY (EETC)


    Name
    Signature
    Date
    Main Contractor: Owner: Consultant: Project Name:
    Toshka 3 (220/66/22 KV) GIS S/S
    Date: Page:
    SEP, 2021 4 of 4
    Vendor: Document Number:

    Sieyuan
    Title.

    CT PRIMARY INJECTION TEST

    CORE-3: Used for Metering


     Injected Current = 300 A

    Reading in Measured Reading in Measured


    Phase
    Multi-Meter (P101) Current (A) Multi-Meter (P50) Current (A)
    R I1 I1
    S I2 I2
    T I3 I3
    N - - - -

    Reading in Measured
    Phase
    Energy Meter (P302) Current (A)
    R I1
    S I2
    T I3
    N - -

    Company MADKOUR WITNESSED BY (EETC)


    Name
    Signature
    Date

    You might also like