1 - Resist MS 403 Eng

Safety data sheet
According to 1907/2006/EC (REACH), 2015/830/EU (THIS SDS IS JUST FOR INFORMATIVE

PURPOSE. THE SDS SHALL BE SUPPLIED IN AN OFFICIAL LANGUAGE OF THE COUNTRY
WHERE THE PRODUCT IS PLACED ON THE MARKET)
Resist MS 403 - Specjalistyczny preparat do czyszczenia

urządzeń elektroenergetycznych
SECTION 1: IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING

1.1 Product identifier: Resist MS 403 - Specjalistyczny preparat do czyszczenia urządzeń elektroenergetycznych
1.2 Relevant identified uses of the substance or mixture and uses advised against:
Relevant uses: Industrial cleaning solvent. For industrial user only.
Uses advised against: All uses not specified in this section or in section 7.3
1.3 Details of the supplier of the safety data sheet:
CT-CARD SP. Z O.O.
Farysa 15B
01-971 Warsaw - Poland
1.4 Emergency telephone number:
SECTION 2: HAZARDS IDENTIFICATION **

2.1 Classification of the substance or mixture:
CLP Regulation (EC) No 1272/2008:
Classification of this product has been carried out in accordance with CLP Regulation (EC) No 1272/2008.
Asp. Tox. 1: Aspiration hazard, Category 1, H304
Eye Irrit. 2: Eye irritation, Category 2, H319
Flam. Liq. 2: Flammable liquids, Category 2, H225
STOT SE 3: Specific toxicity causing drowsiness and dizziness, single exposure, Category 3, H336
2.2 Label elements:
Danger
Hazard statements:
Asp. Tox. 1: H304 - May be fatal if swallowed and enters airways
Eye Irrit. 2: H319 - Causes serious eye irritation
Flam. Liq. 2: H225 - Highly flammable liquid and vapour
STOT SE 3: H336 - May cause drowsiness or dizziness
Precautionary statements:
P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking
P261: Avoid breathing dust/fume/gas/mist/vapours/spray
P271: Use only outdoors or in a well-ventilated area
P304+P340: IF INHALED: Remove person to fresh air and keep comfortable for breathing
P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to
do. Continue rinsing
P370+P378: In case of fire: Extinguisher powder or CO2. In case of more serious fires, also alcohol-resistant foam and water
spray. Do not use a direct stream of water to extinguish
P403+P235: Store in a well-ventilated place. Keep cool
P501: Dispose of contents/container in accordance with regulations on hazardous waste or packaging and packaging waste
respectively
Supplementary information:
EUH066: Repeated exposure may cause skin dryness or cracking
2.3 Other hazards:
Product fails to meet PBT/vPvB criteria
** Changes with regards to the previous version
SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS **

- CONTINUED ON NEXT PAGE -
Date of compilation: 17/12/2020 Revised: 17/12/2020 Version: 2 (Replaced 1) Page 1/11

Safety data sheet

SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS ** (continued)

3.1 Substance:
Non-applicable
3.2 Mixture:
Chemical description: Alcohols
Components:
In accordance with Annex II of Regulation (EC) No 1907/2006 (point 3), the product contains:
Identification Chemical name/Classification Concentration
CAS: Non-applicable Hydrocarbons, C10-C13, n-alkanes, isoalkanes, cyclics, <2% aromatics⁽¹⁽ Self-classified
EC: 918-481-9
40 - <100 %
Index: Non-applicable
Regulation 1272/2008 Asp. Tox. 1: H304; EUH066 - Danger
REACH: 01-2119457273-39-
XXXX
CAS: 67-63-0 propan-2-ol⁽¹⁽ ATP CLP00
EC: 200-661-7
35 - <36 %
Index: 603-117-00-0
Regulation 1272/2008 Eye Irrit. 2: H319; Flam. Liq. 2: H225; STOT SE 3: H336 - Danger
REACH: 01-2119457558-25-
XXXX
⁽¹⁽ Substances presenting a health or environmental hazard which meet criteria laid down in Regulation (EU) No. 2015/830
To obtain more information on the hazards of the substances consult sections 11, 12 and 16.
SECTION 4: FIRST AID MEASURES

4.1 Description of first aid measures:
The symptoms resulting from intoxication can appear after exposure, therefore, in case of doubt, seek medical attention for
direct exposure to the chemical product or persistent discomfort, showing the SDS of this product.
By inhalation:
Remove the person affected from the area of exposure, provide with fresh air and keep at rest. In serious cases such as
cardiorespiratory failure, artificial resuscitation techniques will be necessary (mouth to mouth resuscitation, cardiac massage,
oxygen supply, etc.) requiring immediate medical assistance.
By skin contact:
Remove contaminated clothing and footwear, rinse skin or shower the person affected if appropriate with plenty of cold water
and neutral soap. In serious cases see a doctor. If the product causes burns or freezing, clothing should not be removed as this
could worsen the injury caused if it is stuck to the skin. If blisters form on the skin, these should never be burst as this will
increase the risk of infection.
By eye contact:
Rinse eyes thoroughly with lukewarm water for at least 15 minutes. Do not allow the person affected to rub or close their eyes.
If the injured person uses contact lenses, these should be removed unless they are stuck to the eyes, in which case this could
cause further damage. In all cases, after cleaning, a doctor should be consulted as quickly as possible with the SDS of the
product.
By ingestion/aspiration:
Request medical assistance immediately, showing the SDS of this product. Do not induce vomiting, but if it does happen keep
the head down to avoid aspiration. In the case of loss of consciousness do not administer anything orally unless supervised by a
doctor. Rinse out the mouth and throat, as they may have been affected during ingestion. Keep the person affected at rest.
4.2 Most important symptoms and effects, both acute and delayed:
Acute and delayed effects are indicated in sections 2 and 11.
4.3 Indication of any immediate medical attention and special treatment needed:
Non-applicable
SECTION 5: FIREFIGHTING MEASURES

5.1 Extinguishing media:
If possible use polyvalent powder fire extinguishers (ABC powder), alternatively use foam or carbon dioxide extinguishers (CO⁽).
IT IS RECOMMENDED NOT to use full jet water as an extinguishing agent.

Safety data sheet

SECTION 5: FIREFIGHTING MEASURES (continued)

5.2 Special hazards arising from the substance or mixture:
As a result of combustion or thermal decomposition reactive sub-products are created that can become highly toxic and,
consequently, can present a serious health risk.
5.3 Advice for firefighters:
Depending on the magnitude of the fire it may be necessary to use full protective clothing and self-contained breathing apparatus
(SCBA). Minimum emergency facilities and equipment should be available (fire blankets, portable first aid kit,...) in accordance
with Directive 89/654/EC.
Additional provisions:
Act in accordance with the Internal Emergency Plan and the Information Sheets on actions to take after an accident or other
emergencies. Eliminate all sources of ignition. In case of fire, cool the storage containers and tanks for products susceptible to
combustion, explosion or BLEVE as a result of high temperatures. Avoid spillage of the products used to extinguish the fire into an
aqueous medium.
SECTION 6: ACCIDENTAL RELEASE MEASURES

6.1 Personal precautions, protective equipment and emergency procedures:
Isolate leaks provided that there is no additional risk for the people performing this task. Evacuate the area and keep out those
without protection. Personal protection equipment must be used against potential contact with the spilt product (See section 8).
Above all prevent the formation of any vapour-air flammable mixtures, through either ventilation or the use of an inert medium.
Destroy any source of ignition. Eliminate electrostatic charges by interconnecting all the conductive surfaces on which static
electricity could form, and also ensuring that all surfaces are connected to the ground.
6.2 Environmental precautions:
This product is not classified as hazardous to the environment. Keep product away from drains, surface and underground water.
6.3 Methods and material for containment and cleaning up:
It is recommended:
Absorb the spillage using sand or inert absorbent and move it to a safe place. Do not absorb in sawdust or other combustible
absorbents. For any concern related to disposal consult section 13.
6.4 Reference to other sections:
See sections 8 and 13.
SECTION 7: HANDLING AND STORAGE

7.1 Precautions for safe handling:
A.- Precautions for safe manipulation
Comply with the current legislation concerning the prevention of industrial risks. Keep containers hermetically sealed. Control
spills and residues, destroying them with safe methods (section 6). Avoid leakages from the container. Maintain order and
cleanliness where dangerous products are used.
B.- Technical recommendations for the prevention of fires and explosions
Transfer in well ventilated areas, preferably through localized extraction. Fully control sources of ignition (mobile phones,
sparks,…) and ventilate during cleaning operations. Avoid the existence of dangerous atmospheres inside containers, applying
inertization systems where possible. Transfer at a slow speed to avoid the creation of electrostatic charges. Against the
possibility of electrostatic charges: ensure a perfect equipotential connection, always use groundings, do not wear work
clothes made of acrylic fibres, preferably wearing cotton clothing and conductive footwear. Comply with the essential security
requirements for equipment and systems defined in Directive 2014/34/EC (ATEX 100) and with the minimum requirements for
protecting the security and health of workers under the selection criteria of Directive 1999/92/EC (ATEX 137). Consult section
10 for conditions and materials that should be avoided.
C.- Technical recommendations to prevent ergonomic and toxicological risks
Do not eat or drink during the process, washing hands afterwards with suitable cleaning products.
D.- Technical recommendations to prevent environmental risks
It is recommended to have absorbent material available at close proximity to the product (See subsection 6.3)
7.2 Conditions for safe storage, including any incompatibilities:
A.- Technical measures for storage

Safety data sheet

SECTION 7: HANDLING AND STORAGE (continued)

Minimum Temp.: 5 ºC
Maximum Temp.: 30 ºC
Maximum time: 6 Months
B.- General conditions for storage
Avoid sources of heat, radiation, static electricity and contact with food. For additional information see subsection 10.5
7.3 Specific end use(s):
Except for the instructions already specified it is not necessary to provide any special recommendation regarding the uses of this
product.
SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION

8.1 Control parameters:
Substances whose occupational exposure limits have to be monitored in the workplace
There are no occupational exposure limits for the substances contained in the product
DNEL (Workers):
Short exposure Long exposure
Identification Systemic Local Systemic Local

propan-2-ol Oral Non-applicable Non-applicable Non-applicable Non-applicable
CAS: 67-63-0 Dermal Non-applicable Non-applicable 888 mg/kg Non-applicable
EC: 200-661-7 Inhalation Non-applicable Non-applicable 500 mg/m³ Non-applicable
DNEL (General population):

Short exposure Long exposure
Identification Systemic Local Systemic Local

propan-2-ol Oral Non-applicable Non-applicable 26 mg/kg Non-applicable
CAS: 67-63-0 Dermal Non-applicable Non-applicable 319 mg/kg Non-applicable
EC: 200-661-7 Inhalation Non-applicable Non-applicable 89 mg/m³ Non-applicable
PNEC:
Identification
propan-2-ol STP 2251 mg/L Fresh water 140,9 mg/L
CAS: 67-63-0 Soil 28 mg/kg Marine water 140,9 mg/L
EC: 200-661-7 Intermittent 140,9 mg/L Sediment (Fresh water) 552 mg/kg
Oral 0,16 g/kg Sediment (Marine water) 552 mg/kg
8.2 Exposure controls:
A.- General security and hygiene measures in the work place
As a preventative measure it is recommended to use basic Personal Protective Equipment, with the corresponding <<CE
marking>> in accordance with Directive 89/686/EC. For more information on Personal Protective Equipment (storage, use,
cleaning, maintenance, class of protection,…) consult the information leaflet provided by the manufacturer. For more
information see subsection 7.1.
All information contained herein is a recommendation which needs some specification from the labour risk prevention services
as it is not known whether the company has additional measures at its disposal.
B.- Respiratory protection
Pictogram PPE Labelling CEN Standard Remarks
Replace when there is a taste or smell of the

Filter mask for gases and contaminant inside the face mask. If the
EN 405:2001+A1:2009
vapours contaminant comes with warnings it is
Mandatory recommended to use isolation equipment.
respiratory tract
protection
C.- Specific protection for the hands

Safety data sheet

SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION (continued)
The Breakthrough Time indicated by the

EN ISO 374-1:2016 manufacturer must exceed the period during which
NON-disposable chemical
EN 16523-1:2015 the product is being used. Do not use protective
protective gloves
EN 420:2003+A1:2009 creams after the product has come into contact
Mandatory hand with skin.
protection
"As the product is a mixture of several substances, the resistance of the glove material can not be predicted in advance with
total reliability and has therefore to be checked prior to the application"
D.- Ocular and facial protection
EN 166:2001
Clean daily and disinfect periodically according to
EN 167:2001
Face shield the manufacturer´s instructions. Use if there is a
EN 168:2001
risk of splashing.
Mandatory face EN ISO 4007:2018
protection
E.- Body protection
EN 1149-1,2,3
EN 13034:2005+A1:2009
Disposable clothing for EN ISO 13982-
protection against chemical 1:2004/A1:2010 For professional use only. Clean periodically
Mandatory complete risks, with antistatic and EN ISO 6529:2013 according to the manufacturer´s instructions.
body protection fireproof properties EN ISO 6530:2005
EN ISO 13688:2013
EN 464:1994
Safety footwear for

EN ISO 13287:2012
protection against chemical
EN ISO 20345:2011 Replace boots at any sign of deterioration.
risk, with antistatic and heat
EN 13832-1:2019
Mandatory foot resistant properties
protection
F.- Additional emergency measures
Emergency measure Standards Emergency measure Standards
ANSI Z358-1 DIN 12 899

ISO 3864-1:2011, ISO 3864-4:2011 ISO 3864-1:2011, ISO 3864-4:2011
Emergency shower Eyewash stations
Environmental exposure controls:

In accordance with the community legislation for the protection of the environment it is recommended to avoid environmental
spillage of both the product and its container. For additional information see subsection 7.1.D
Volatile organic compounds:
With regard to Directive 2010/75/EU, this product has the following characteristics:
V.O.C. (Supply): 100 % weight
V.O.C. density at 20 ºC: 766,98 kg/m³ (766,98 g/L)
Average carbon number: 6,9
Average molecular weight: 105,54 g/mol
SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES

9.1 Information on basic physical and chemical properties:
For complete information see the product datasheet.
Appearance:
Physical state at 20 ºC: Liquid
Appearance: Not available
*Not relevant due to the nature of the product, not providing information property of its hazards.

Safety data sheet

SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES (continued)

Colour: Not available
Odour: Soft
Odour threshold: Non-applicable *
Volatility:
Boiling point at atmospheric pressure: 135 ºC
Vapour pressure at 20 ºC: 2768 Pa
Vapour pressure at 50 ºC: 13957,93 Pa (13,96 kPa)
Evaporation rate at 20 ºC: Non-applicable *
Product description:
Density at 20 ºC: 767 kg/m³
Relative density at 20 ºC: 0,767
Dynamic viscosity at 20 ºC: 1,43 cP
Kinematic viscosity at 20 ºC: 1,87 cSt
Kinematic viscosity at 40 ºC: Non-applicable *
Concentration: Non-applicable *
pH: Non-applicable *
Vapour density at 20 ºC: 788 - 800 kg/m³
Partition coefficient n-octanol/water 20 ºC: Non-applicable *
Solubility in water at 20 ºC: Non-applicable *
Solubility properties: Soluble with difficulty
Decomposition temperature: >61 ºC
Melting point/freezing point: Non-applicable *
Explosive properties: Non-applicable *
Oxidising properties: Non-applicable *
Flammability:
Flash Point: 12 ºC
Flammability (solid, gas): Non-applicable *
Autoignition temperature: >200 ºC
Lower flammability limit: Not available
Upper flammability limit: Not available
Explosive:
Lower explosive limit: 2 g/m³
Upper explosive limit: Non-applicable *
9.2 Other information:
Surface tension at 20 ºC: Non-applicable *
Refraction index: Non-applicable *
*Not relevant due to the nature of the product, not providing information property of its hazards.
SECTION 10: STABILITY AND REACTIVITY

10.1 Reactivity:
No hazardous reactions are expected because the product is stable under recommended storage conditions. See section 7.
10.2 Chemical stability:
Chemically stable under the conditions of storage, handling and use.
10.3 Possibility of hazardous reactions:

Safety data sheet

SECTION 10: STABILITY AND REACTIVITY (continued)

Under the specified conditions, hazardous reactions that lead to excessive temperatures or pressure are not expected.
10.4 Conditions to avoid:
Applicable for handling and storage at room temperature:
Shock and friction Contact with air Increase in temperature Sunlight Humidity
Not applicable Not applicable Risk of combustion Avoid direct impact Not applicable
10.5 Incompatible materials:

Acids Water Oxidising materials Combustible materials Others
Avoid strong acids Not applicable Avoid direct impact Not applicable Avoid alkalis or strong bases
10.6 Hazardous decomposition products:

See subsection 10.3, 10.4 and 10.5 to find out the specific decomposition products. Depending on the decomposition conditions,
complex mixtures of chemical substances can be released: carbon dioxide (CO2), carbon monoxide and other organic
compounds.
SECTION 11: TOXICOLOGICAL INFORMATION **

11.1 Information on toxicological effects:
Dangerous health implications:
In case of exposure that is repetitive, prolonged or at concentrations higher than the recommended occupational exposure limits,
adverse effects on health may result, depending on the means of exposure:
A- Ingestion (acute effect):
- Acute toxicity : Based on available data, the classification criteria are not met, as it does not contain substances classified
as dangerous for consumption. For more information see section 3.
- Corrosivity/Irritability: Based on available data, the classification criteria are not met, as it does not contain substances
classified as dangerous for this effect. For more information see section 3.
B- Inhalation (acute effect):
- Acute toxicity : Based on available data, the classification criteria are not met, as it does not contain substances classified
as dangerous for inhalation. For more information see section 3.
- Corrosivity/Irritability: Based on available data, the classification criteria are not met, as it does not contain substances
C- Contact with the skin and the eyes (acute effect):
- Contact with the skin: Based on available data, the classification criteria are not met, as it does not contain substances
classified as dangerous for skin contact. For more information see section 3.
- Contact with the eyes: Produces eye damage after contact.
D- CMR effects (carcinogenicity, mutagenicity and toxicity to reproduction):
- Carcinogenicity: Based on available data, the classification criteria are not met, as it does not contain substances classified
as dangerous for the effects mentioned. For more information see section 3.
IARC: propan-2-ol (3)
- Mutagenicity: Based on available data, the classification criteria are not met, as it does not contain substances classified as
dangerous for this effect. For more information see section 3.
- Reproductive toxicity: Based on available data, the classification criteria are not met, as it does not contain substances
E- Sensitizing effects:
- Respiratory: Based on available data, the classification criteria are not met, as it does not contain substances classified as
dangerous with sensitising effects. For more information see section 3.
- Cutaneous: Based on available data, the classification criteria are not met, as it does not contain substances classified as
dangerous for this effect. For more information see section 3.
F- Specific target organ toxicity (STOT) - single exposure:
Exposure in high concentration can interfere with the central nervous system causing headache, dizziness, vertigo, nausea,
vomiting, confusion, and in serious cases, loss of consciousness.
G- Specific target organ toxicity (STOT)-repeated exposure:
- Specific target organ toxicity (STOT)-repeated exposure: Based on available data, the classification criteria are not met, as
it does not contain substances classified as dangerous for this effect. For more information see section 3.
- Skin: Repeated exposure may cause skin dryness or cracking


Safety data sheet

SECTION 11: TOXICOLOGICAL INFORMATION ** (continued)

H- Aspiration hazard:
The consumption of a considerable dose can cause pulmonary damage.
Other information:
Non-applicable
Product-specific toxicological information:
Acute toxicity Genus
LD50 oral 2000 mg/kg
LD50 dermal 2000 mg/kg
LC50 inhalation 5 mg/L (48 h) Rat
Specific toxicology information on the substances:
Identification Acute toxicity Genus
propan-2-ol LD50 oral 5280 mg/kg Rat
CAS: 67-63-0 LD50 dermal 12800 mg/kg Rat
EC: 200-661-7 LC50 inhalation 72,6 mg/L (4 h) Rat
SECTION 12: ECOLOGICAL INFORMATION **

12.1 Toxicity:
Product-specific aquatic toxicity:
Acute toxicity Species Genus
LC50 1000 mg/L (96 h) Daphnia galeata Crustacean
EC50 1000 mg/L (48 h) Oncorhynchus mykiss Fish
EC50 1000 mg/L (72 h) Pseudokirchneriella subcapitata Algae
Substance-specific aquatic toxicity:

Identification Acute toxicity Species Genus
propan-2-ol LC50 9640 mg/L (96 h) Pimephales promelas Fish
CAS: 67-63-0 EC50 13299 mg/L (48 h) Daphnia magna Crustacean
EC: 200-661-7 EC50 1000 mg/L (72 h) Scenedesmus subspicatus Algae
12.2 Persistence and degradability:
Identification Degradability Biodegradability
propan-2-ol BOD5 1.19 g O2/g Concentration 100 mg/L
CAS: 67-63-0 COD 2.23 g O2/g Period 14 days
EC: 200-661-7 BOD5/COD 0.53 % Biodegradable 86 %
12.3 Bioaccumulative potential:
Identification Bioaccumulation potential
propan-2-ol BCF 3
CAS: 67-63-0 Pow Log 0.05
EC: 200-661-7 Potential Low
12.4 Mobility in soil:
Identification Absorption/desorption Volatility
propan-2-ol Koc 1.5 Henry 8,207E-1 Pa·m³/mol
CAS: 67-63-0 Conclusion Very High Dry soil Yes
EC: 200-661-7 Surface tension 2,24E-2 N/m (25 ºC) Moist soil Yes
12.5 Results of PBT and vPvB assessment:
Product fails to meet PBT/vPvB criteria
12.6 Other adverse effects:
Not described


Safety data sheet

SECTION 13: DISPOSAL CONSIDERATIONS

13.1 Waste treatment methods:
Waste class (Regulation (EU) No
Code Description
1357/2014)
07 06 04* other organic solvents, washing liquids and mother liquors Dangerous
Type of waste (Regulation (EU) No 1357/2014):

HP3 Flammable, HP5 Specific Target Organ Toxicity (STOT)/Aspiration Toxicity, HP4 Irritant — skin irritation and eye damage
Waste management (disposal and evaluation):
Consult the authorized waste service manager on the assessment and disposal operations in accordance with Annex 1 and Annex
2 (Directive 2008/98/EC). As under 15 01 (2014/955/EC) of the code and in case the container has been in direct contact with
the product, it will be processed the same way as the actual product. Otherwise, it will be processed as non-dangerous residue.
We do not recommended disposal down the drain. See paragraph 6.2.
Regulations related to waste management:
In accordance with Annex II of Regulation (EC) No 1907/2006 (REACH) the community or state provisions related to waste
management are stated
Community legislation: Directive 2008/98/EC, 2014/955/EU, Regulation (EU) No 1357/2014
SECTION 14: TRANSPORT INFORMATION **

Transport of dangerous goods by land:
With regard to ADR 2019 and RID 2019:
14.1 UN number: UN1987
14.2 UN proper shipping name: ALCOHOLS, N.O.S. (propan-2-ol)
14.3 Transport hazard class(es): 3
Labels: 3
14.4 Packing group: II
14.5 Environmental hazards: No
14.6 Special precautions for user
Special regulations: 274, 601, 640D
Tunnel restriction code: D/E
Physico-Chemical properties: see section 9
Limited quantities: 1L
14.7 Transport in bulk according Non-applicable
to Annex II of Marpol and
the IBC Code:
Transport of dangerous goods by sea:
With regard to IMDG 39-18:
Labels: 3
Special regulations: 274
EmS Codes: F-E, S-D
Limited quantities: 1L
Segregation group: Non-applicable
the IBC Code:


Safety data sheet

SECTION 14: TRANSPORT INFORMATION ** (continued)

Transport of dangerous goods by air:
With regard to IATA/ICAO 2020:
Labels: 3
the IBC Code:
SECTION 15: REGULATORY INFORMATION

15.1 Safety, health and environmental regulations/legislation specific for the substance or mixture:
Candidate substances for authorisation under the Regulation (EC) No 1907/2006 (REACH): Non-applicable
Substances included in Annex XIV of REACH ("Authorisation List") and sunset date: Non-applicable
Regulation (EC) No 1005/2009, about substances that deplete the ozone layer: Non-applicable
Article 95, REGULATION (EU) No 528/2012: propan-2-ol (Product-type 1, 2, 4)
REGULATION (EU) No 649/2012, in relation to the import and export of hazardous chemical products: Non-applicable
Seveso III:
Lower-tier Upper-tier
Section Description
requirements requirements
P5c FLAMMABLE LIQUIDS 5000 50000
Limitations to commercialisation and the use of certain dangerous substances and mixtures (Annex XVII REACH,
etc ….):
Non-applicable
Specific provisions in terms of protecting people or the environment:
It is recommended to use the information included in this safety data sheet as a basis for conducting workplace-specific risk
assessments in order to establish the necessary risk prevention measures for the handling, use, storage and disposal of this
product.
Other legislation:
The product could be affected by sectorial legislation
- Regulation (EC) No 1223/2009 of the European Parliament and of the Council of 30 November 2009 on cosmetic products
- Regulation (EC) No 648/2004 of the European Parliament and of the Council of 31 March 2004 on detergents
- Commission Regulation (EC) No 907/2006 of 20 June 2006 amending Regulation (EC) No 648/2004 of the European Parliament
and of the Council on detergents, in order to adapt Annexes III and VII
- Commission Regulation (EC) No 551/2009 of 25 June 2009 amending Regulation (EC) No 648/2004 of the European Parliament
and of the Council on detergents, in order to adapt Annexes V and VI thereto (surfactant derogation)
15.2 Chemical safety assessment:
The supplier has not carried out evaluation of chemical safety.
SECTION 16: OTHER INFORMATION **

Legislation related to safety data sheets:
This safety data sheet has been designed in accordance with ANNEX II-Guide to the compilation of safety data sheets of
Regulation (EC) No 1907/2006 (Regulation (EC) No 2015/830)
Modifications related to the previous Safety Data Sheet which concerns the ways of managing risks.:


Safety data sheet

SECTION 16: OTHER INFORMATION ** (continued)

COMPOSITION/INFORMATION ON INGREDIENTS (SECTION 3, SECTION 11, SECTION 12):
· New declared substances
Hydrocarbons, C10-C13, n-alkanes, isoalkanes, cyclics, <2% aromatics
propan-2-ol (67-63-0)
CLP Regulation (EC) No 1272/2008 (SECTION 2, SECTION 16):
· Pictograms
· Hazard statements
· Precautionary statements
· Supplementary information
TRANSPORT INFORMATION (SECTION 14):
· UN number
· Packing group
Texts of the legislative phrases mentioned in section 2:
H225: Highly flammable liquid and vapour
H319: Causes serious eye irritation
H336: May cause drowsiness or dizziness
H304: May be fatal if swallowed and enters airways
Texts of the legislative phrases mentioned in section 3:
The phrases indicated do not refer to the product itself; they are present merely for informative purposes and refer to the
individual components which appear in section 3
Asp. Tox. 1: H304 - May be fatal if swallowed and enters airways
Eye Irrit. 2: H319 - Causes serious eye irritation
Flam. Liq. 2: H225 - Highly flammable liquid and vapour
STOT SE 3: H336 - May cause drowsiness or dizziness
Advice related to training:
Minimal training is recommended in order to prevent industrial risks for staff using this product and to facilitate their
comprehension and interpretation of this safety data sheet, as well as the label on the product.
Principal bibliographical sources:
http://echa.europa.eu
http://eur-lex.europa.eu
Abbreviations and acronyms:
ADR: European agreement concerning the international carriage of dangerous goods by road
IMDG: International maritime dangerous goods code
IATA: International Air Transport Association
ICAO: International Civil Aviation Organisation
COD: Chemical Oxygen Demand
BOD5: 5-day biochemical oxygen demand
BCF: Bioconcentration factor
LD50: Lethal Dose 50
LC50: Lethal Concentration 50
EC50: Effective concentration 50
Log-POW: Octanol-water partition coefficient
Koc: Partition coefficient of organic carbon
The information contained in this safety data sheet is based on sources, technical knowledge and current legislation at European and state level, without being able to guarantee its accuracy. This
information cannot be considered a guarantee of the properties of the product, it is simply a description of the security requirements. The occupational methodology and conditions for users of
this product are not within our awareness or control, and it is ultimately the responsibility of the user to take the necessary measures to obtain the legal requirements concerning the
manipulation, storage, use and disposal of chemical products. The information on this safety data sheet only refers to this product, which should not be used for needs other than those specified.
- END OF SAFETY DATA SHEET -

1 - Resist MS 403 Eng

Uploaded by

Copyright:

Available Formats

1 - Resist MS 403 Eng

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

1 - Resist MS 403 Eng

Uploaded by

Copyright:

Available Formats

Safety data sheet

According to 1907/2006/EC (REACH), 2015/830/EU (THIS SDS IS JUST FOR INFORMATIVE

Resist MS 403 - Specjalistyczny preparat do czyszczenia

SECTION 1: IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING

SECTION 2: HAZARDS IDENTIFICATION **

** Changes with regards to the previous version

SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS **

** Changes with regards to the previous version

Date of compilation: 17/12/2020 Revised: 17/12/2020 Version: 2 (Replaced 1) Page 1/11

Resist MS 403 - Specjalistyczny preparat do czyszczenia

SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS ** (continued)

** Changes with regards to the previous version

SECTION 4: FIRST AID MEASURES

SECTION 5: FIREFIGHTING MEASURES

- CONTINUED ON NEXT PAGE -

Date of compilation: 17/12/2020 Revised: 17/12/2020 Version: 2 (Replaced 1) Page 2/11

Resist MS 403 - Specjalistyczny preparat do czyszczenia

SECTION 5: FIREFIGHTING MEASURES (continued)

SECTION 6: ACCIDENTAL RELEASE MEASURES

SECTION 7: HANDLING AND STORAGE

- CONTINUED ON NEXT PAGE -

Date of compilation: 17/12/2020 Revised: 17/12/2020 Version: 2 (Replaced 1) Page 3/11

Resist MS 403 - Specjalistyczny preparat do czyszczenia

SECTION 7: HANDLING AND STORAGE (continued)

SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION

Identification Systemic Local Systemic Local

DNEL (General population):

Identification Systemic Local Systemic Local

Replace when there is a taste or smell of the

- CONTINUED ON NEXT PAGE -

Date of compilation: 17/12/2020 Revised: 17/12/2020 Version: 2 (Replaced 1) Page 4/11

Resist MS 403 - Specjalistyczny preparat do czyszczenia

SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION (continued)

Pictogram PPE Labelling CEN Standard Remarks

The Breakthrough Time indicated by the

Safety footwear for

ANSI Z358-1 DIN 12 899

Environmental exposure controls:

SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES

- CONTINUED ON NEXT PAGE -

Date of compilation: 17/12/2020 Revised: 17/12/2020 Version: 2 (Replaced 1) Page 5/11

Resist MS 403 - Specjalistyczny preparat do czyszczenia

SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES (continued)

SECTION 10: STABILITY AND REACTIVITY

- CONTINUED ON NEXT PAGE -

Date of compilation: 17/12/2020 Revised: 17/12/2020 Version: 2 (Replaced 1) Page 6/11

Resist MS 403 - Specjalistyczny preparat do czyszczenia

SECTION 10: STABILITY AND REACTIVITY (continued)

10.5 Incompatible materials:

10.6 Hazardous decomposition products:

SECTION 11: TOXICOLOGICAL INFORMATION **

** Changes with regards to the previous version

Date of compilation: 17/12/2020 Revised: 17/12/2020 Version: 2 (Replaced 1) Page 7/11

Resist MS 403 - Specjalistyczny preparat do czyszczenia

SECTION 11: TOXICOLOGICAL INFORMATION ** (continued)

** Changes with regards to the previous version

SECTION 12: ECOLOGICAL INFORMATION **

Substance-specific aquatic toxicity:

** Changes with regards to the previous version