Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 939 views

    User Manual of Y Axis Rotary Roller

    Uploaded by

    Alex Riva
    This document provides instructions for assembling and using a Y-axis rotary roller accessory for laser engraving cylindrical objects. It includes diagrams and steps for assembling the roller frame, motor, pulleys and bearings. It also provides guidance on installation with cantilever and frame laser engravers, including connecting the roller to the engraver with an extension cable and adjusting the laser focus. Safety precautions are noted, including the importance of wearing laser eye protection.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    User Manual of Y Axis Rotary Roller

    Uploaded by

    Alex Riva
    939 views12 pages
    This document provides instructions for assembling and using a Y-axis rotary roller accessory for laser engraving cylindrical objects. It includes diagrams and steps for assembling the roller frame, motor, pulleys and bearings. It also provides guidance on installation with cantilever and frame laser engravers, including connecting the roller to the engraver with an extension cable and adjusting the laser focus. Safety precautions are noted, including the importance of wearing laser eye protection.

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides instructions for assembling and using a Y-axis rotary roller accessory for laser engraving cylindrical objects. It includes diagrams and steps for assembling the roller frame, motor, pulleys and bearings. It also provides guidance on installation with cantilever and frame laser engravers, including connecting the roller to the engraver with an extension cable and adjusting the laser focus. Safety precautions are noted, including the importance of wearing laser eye protection.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    939 views12 pages

    User Manual of Y Axis Rotary Roller

    Uploaded by

    Alex Riva
    This document provides instructions for assembling and using a Y-axis rotary roller accessory for laser engraving cylindrical objects. It includes diagrams and steps for assembling the roller frame, motor, pulleys and bearings. It also provides guidance on installation with cantilever and frame laser engravers, including connecting the roller to the engraver with an extension cable and adjusting the laser focus. Safety precautions are noted, including the importance of wearing laser eye protection.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 12
    At a glance
    Powered by AI
    The Y-axis Rotary Roller is used for laser engraving cylindrical objects and must be used with a laser engraver. It can be used with different brands of laser engravers but compatibility is not guaranteed.

    You assemble the frame and motor, idle pulley, roller bearings, timing belt pulleys and insert the timing belt. Adjust positions and tighten screws.

    Place the object on the roller, connect it to the laser engraver with an extension cable by unplugging the Y motor cable. Adjust position and focus then start engraving, making sure the laser spot is aligned with the cylinder apex.

    User Manual of

    Y Axis Rotary Roller

    Dongguan Ortur Intelligent Technologies Co., Ltd.


    (EN)Address: No. 56 Maxin Road, Changping Town, Dongguan 523565, Guangdong Province, China

    (FR)Adresse: No. 56 Route Maxin, Changping Town, Dongguan 523565, Province de Guangdong, Chine

    (DE)Adresse: 56 Maxin Road, Stadt Changping, Dongguan 523565, Provinz Guangdong, China

    (IT)Indirizzo: No. 56 Maxin Road, Città Changping, Dongguan 523565, Provincia del Guangdong, Cina

    (ES)Dirección: 56 Maxin Road, Ciudad Changping, Dongguan 523565, Provincia de Guangdong, China

    1
    Brief Introduction

     This Y-axis Rotary Roller is used for laser engraving on cylindrical


    objects.

     This Y-axis Rotary Roller is an accessory part of Laser Engraver,


    cannot be used alone.

    Attention

     This Y-axis Rotary Roller could be used with other brands of laser
    engraver, but it does not guarantee a perfect match.

     If user modifies the Y-axis Rotary Roller without permission, we would


    not be responsible.

    1
    Assembly Procedure

    1. Assemble the Frame and Motor by 4 x M3*8 screws and 4

    x M5*10 screws

    M5*10 Screw ×4Pcs


    M3*8 Screw ×4Pcs

    2. Assemble the Idle Pulley

    Bearing ×4Pcs M5 Nut ×2Pcs

    5.3mm Spacer ×2Pcs

    M5 Locknut ×2Pcs
    2
    M5*20 Screw ×2Pcs
    3. Assemble Roller

    Bearing ×2Pcs

    Bearing ×2Pcs

    M5*10 Screw ×4Pcs


    M5 Nut ×4Pcs

    Note: The screws here should not be tightened for


    now, and the installation gap should be reserved.

    M5 Nut ×4Pcs

    M5*10 Screw ×4Pcs

    3
    4. Assemble Timing Belt Pulleys.

    25 Teeth Timing Belt Pulley ×2Pcs

    16 Teeth Timing Belt Pulley ×1Pc

    5. Last Step.

    Insert the timing belt, adjust the


    position of each Timing Belt Pulley,
    and use the hex wrench to tighten the
    internal fixing screw.

    4
    The distance between the two rollers can be adjusted
    according to actual needs

    5
    Setting Procedure
    Turn off the Automatic Home function. (Please skip this step

    if your laser engraver does not have this function.)

    1.Turn on the laser engraver, open


    the LaserGRBL software on
    computer, and connect the laser
    engraver.
    2.Unlock the laser engraver.

    2.Unlock the laser engraver.

    6
    3.Open Grbl Configuration.

    4. Change the value here to 0, to turn off


    the Automatic Return to Origin function.

    7
    5.Write data to the main 6.Close the window.
    board.
    1. The installation method for marching with
    cantilever laser engraver：

    1.1. Place the subject as shown in the figure below, and connect with

    the laser engraver by a 500MM extension cable.

    Heighten the laser


    engraver according to
    the height of the object. Unplug the Y Motor Cable, and
    connect this Y Motor Cable and
    the Y-axis Rotary Roller by the
    extension cable.

    8
    1.2. Adjust the position and laser focus, then start engraving.

    WARNING: Must wear eye protection (Laser goggles) before

    operating laser !!!

    The laser spot should be aligned with


    the apex of the cylinder object.

    9
    2. The installation method for marching with
    frame laser engraver：

    2.1. Place the subject as shown in the figure below, and connect with

    the laser engraver

    Heighten the laser


    engraver according to the
    height of the object.

    Unplug the Y Motor Cable, and


    connect this Y Motor Cable and
    the Y-axis Rotary Roller by the
    10 extension cable.
    2.2. Adjust the position and laser focus, then start engraving.

    PS. DO wear eye protection (Laser goggles) before operating laser !!!

    The laser spot should be aligned with


    the apex of the cylinder object.

    11

    You might also like