Xxx-Pol - Vet Panel - 65° - 17.5 Dbi: Access Ports Description (Connectors)

880-960 / 1710-2170 / 1710-2170 MHz
5880100
● Triple band antenna, 6 connectors
5880000 5880000G
● Independent tilt on each band 0-10° / 0-12° / 0-12°
● Slimline profile for low wind load XXX-Pol | VET Panel | 65° | 17.5 dBi
● MET and RET versions, AISG1.1 or 3GPP/AISG2.0
● Single RET module to control all tilt angles
Model number options:

5880100 Manual Electrical Tilt Antenna
5880000 Remote Electrical Tilt Antenna (AISG1.1)
5880000G Remote Electrical Tilt Antenna (3GPP/AISG2.0)
Access Ports Description (Connectors)

The antenna has six connectors located at the bottom face, marked with colored rings.
Low Band (RED rings) 880-960 MHz ports 2 x 7/16 DIN Long Neck
1710-2170 MHz ports
High Band (WHITE rings) 2 x 7/16 DIN Ultra Long Neck
Pattern optimized for DCS1800
1710-2170 MHz ports
High Band (BLUE rings) 2 x 7/16 DIN Long Neck
Pattern optimized for UMTS2100
Electrical Characteristics Low Band (RED) High Band (WHITE) High Band (BLUE)
Frequency band 880-960 MHz 1710-1880 MHz 1900-2170 MHz 1710-1880 MHz 1900-2170 MHz
Polarization ±45° ±45° ±45°
Horizontal beamwidth 65° 65° 62° 65° 62°
Vertical beamwidth 7° 7° 7° 7° 7°
Gain
0° downtilt 17.0-17.5 dBi 16.5-16.7 dBi 16.7-17.2 dBi 16.5-16.9 dBi 16.9-17.3 dBi
Electrical downtilt 0-10° 0-12° 0-12°
Impedance 50Ω 50Ω 50Ω
VSWR < 1.4 < 1.4 < 1.4
Upper sidelobe rejection 18 dB typical 18 dB typical 18 dB typical
Front-to-Back ratio > 30 dB > 30 dB > 30 dB
Isolation between ports > 30 dB > 30 dB > 30 dB
Isolation between bands 45 dB typical 45 dB typical 45 dB typical
IM3 (2x20W carrier) < -110 dBm < -110 dBm < -110 dBm
Maximum power per port 200 W 160 W 160 W
Electrical Downtilt Control
Electrical downtilt can be controlled separately for low band (RED), high band (WHITE) and high band (BLUE). The three
tilt indicators are covered by a removable transparent cap.
Manual control: A colored knob at the end of the tilt indicator allows change of the tilt without need for a tool. Knob color
is identical to connector colors as defined above. To access the knob, the cap is removed by turning it counter clockwise.
It is re-installed by opposite rotation.
Remote control: The remote control of the electrical tilt is managed by a module (MDCU) totally inserted at the bottom
of the antenna. One single module controls individually the tilt of each band (no need of daisy chain cables between the
bands). For RET control, the transparent cap must be in place and locked.
This module does not add any additional length at the bottom of the antenna. The tilt angle indicator stays always visible
and the antenna still has manual tilt control (manual override).
RET module part number MDCU-A0002 Compliant to AISG1.1

MDCU-G0002 Compliant to 3GPP/AISG2.0
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
REV0809 www.amphenol-jaybeam.com B-56

880-960 / 1710-2170 / 1710-2170 MHz
5880100
5880000 5880000G
XXX-Pol | VET Panel | 65° | 17.5 dBi
Environmental
Operating temperature range -40° to +60° C -40° to +140° F
Environmental ETS 300 019
RoHS compliant Yes
Mechanical Characteristics
Dimensions HxWxD 2690 x 253 x 147 mm 105.9 x 10.0 x 5.8 in
Weight without brackets 27.5 kg 61 lbs
Survival wind speed 200 km/hr 124 mph
Operational wind speed 160 km/hr 100 mph
Wind load @ 160 km/hr (100 mph) Front: 580, Side: 480, Rear: 910 N Front: 130, Side: 108, Rear: 205 lbf
Shroud / Housing Outdoor plastic, RAL7035 / Aluminum
Packaging
Packing dimensions 2930 x 350 x 240 mm 115.4 x 13.8 x 9.4 in
Packing weight 35 kg 77 lbs
Packing volume 0.246 m3 8.7 ft3
Mounting Options (Installation accessories to be ordered separately)
Description: Part number: Fits pipe diameter: Weight:
Mounting bracket kit 0900393/00 48-115 mm 1.9-4.5 in 5.1 kg 11 lbs
Mounting bracket kit 0900501/00 70-150 mm 2.8-5.9 in 5.8 kg 13 lbs
Kit to add mech. downtilt (0-10°) 0900394/00 --- 3.1 kg 7 lbs
Wall mount with azimuth pan 0900395/00 --- 2.3 kg 5 lbs
Wall mount with mech. tilt & az. pan 0900533/00 --- 4.4 kg 10 lbs
Installation
Always attach antenna by the three mounting points. Do not install with the connectors facing upward.
Bottom View
Location of the MDCU for

RET control
Tilt indicator covered by a

transparent cap. Manual ad-
justment is accessed by re-
moving the cap. Knob color is
same as connectors.
For RET control, the cap must

be in place.
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
B-57 www.amphenol-jaybeam.com REV0809

Xxx-Pol - Vet Panel - 65° - 17.5 Dbi: Access Ports Description (Connectors)

Uploaded by

Copyright:

Available Formats

Xxx-Pol - Vet Panel - 65° - 17.5 Dbi: Access Ports Description (Connectors)

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Xxx-Pol - Vet Panel - 65° - 17.5 Dbi: Access Ports Description (Connectors)

Uploaded by

Copyright:

Available Formats

880-960 / 1710-2170 / 1710-2170 MHz

Model number options:

Access Ports Description (Connectors)

RET module part number MDCU-A0002 Compliant to AISG1.1

REV0809 www.amphenol-jaybeam.com B-56

Location of the MDCU for

Tilt indicator covered by a

For RET control, the cap must

B-57 www.amphenol-jaybeam.com REV0809

You might also like