A08 SMD
A08 SMD
A08 SMD
, LTD
U74AHC1G08 CMOS IC
5
DESCRIPTION
4
The U74AHC1G08 is a high-speed Si-gate CMOS device which
provides the 2-input AND function. SOT-25
1
2
FEATURES 3
ORDERING INFORMATION
Order Number
Package Packing
Normal Lead Free Plating
U74AHC1G08-AF5-R U74AHC1G08L-AF5-R SOT-25 Tape Reel
U74AHC1G08-AL5-R U74AHC1G08L-AL5-R SOT-325 Tape Reel
U74AHC1G08L-AF5-R
(1)Packing Type (1) R: Tape Reel
(2)Package Type (2) AF5: SOT-25, AL5: SOT-353
(3)Lead Plating (3) L: Lead Free Plating, Blank: Pb/Sn
MARKING
3 2 1
A08
Lead Plating
4 5
www.unisonic.com.tw 1 of 5
Copyright © 2005 Unisonic Technologies Co., Ltd QW-R502-064,A
U74AHC1G08 CMOS IC
PIN CONFIGURATION
GND B A
3 2 1
4 5
Y VCC
1 1
A A
4 Y & 4 Y
B 2 B 2
STATIC CHARACTERISTICS
TA=25℃ -40~85℃
PARAMETER SYMBOL TEST CONDITIONS VCC(V) UNIT
MIN TYP MAX MIN MAX
2.0 1.5 1.5
High-Level Input
VIH 3.0 2.1 2.1 V
Voltage
5.5 3.85 3.85
2.0 0.5 0.5
Low-Level Input
VIL 3.0 0.9 0.9 V
Voltage
5.5 1.65 1.65
2.0 1.9 2.0 1.9
IOH=-50μA 3.0 2.9 3.0 2.9
High-Level Output
VOH 4.5 4.4 4.5 4.4 V
Voltage
IOH=-4mA 3.0 2.58 2.48
IOH=-8mA 4.5 3.94 3.8
2.0 0.1 0.1
IOL=50μA 3.0 0.1 0.1
Low-Level Output
VOL 4.5 0.1 0.1 V
Voltage
IOL=4mA 3.0 0.36 0.44
IOL=8mA 4.5 0.36 0.44
Input Leakage Current VIN=VCC or GND 0~5.5 ±0.1 ±1 μA
Quiescent Supply VIN=VCC or GND
5.5 1 10 μA
Current IOUT=0
Input Capacitance VIN=VCC or GND 5 4 10 10 pF
OPERATING CHARACTERISTICS
PARAMETER SYMBOL TEST CONDITIONS TYP UNIT
Power Dissipation Capacitance Cpd No load, f=1MHz, VCC=5 18 pF
Output
CL (Note2)
VCC
UTC assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or
other parameters) listed in products specifications of any and all UTC products described or contained
herein. UTC products are not designed for use in life support appliances, devices or systems where
malfunction of these products can be reasonably expected to result in personal injury. Reproduction in
whole or in part is prohibited without the prior written consent of the copyright owner. The information
presented in this document does not form part of any quotation or contract, is believed to be accurate
and reliable and may be changed without notice.