Dual Operational Amplifiers Az4558
Dual Operational Amplifiers Az4558
Dual Operational Amplifiers Az4558
The AZ4558 consists of two high performance opera- · Internal frequency compensation
tional amplifiers. The IC features high gain, high input · Large DC voltage gain with 100 dB typical
resistance, excellent channel separation, wide range of · High input resistance with 5MΩ typical
operating voltage and internal frequency compensa-
· Low input noise voltage with 10nV/ HZ
tion. It is specifically suitable for applications in differ-
ential-in, differential-out as well as in potential-metric · Maximum power supply voltages: ± 18V
amplifiers and where gain and phase matched channels · Compatible with NJM 4558
are mandatory. The AZ4558 contains ± 18Vmaximum
power supply voltage. Applications
The AZ4558 is available in DIP-8 or SOIC-8 package. · Audio AC-3 decoded system
· Audio amplifier
Pin Configuration
SOIC-8/DIP-8
OUTPUT 1 1 8 VCC
INPUT 1- 2 7 OUTPUT 2
INPUT 1+ 3 6 INPUT 2-
Top View
- Input
150 Ω
+ Input 25 Ω
Output
25 Ω
10pF
87pF
7.1 KΩ 7.1 4.2 KΩ
KΩ 480 Ω
36 KΩ
V EE
Note: Stresses greater than those listed under "Absolute Maximum Ratings" may cause permanent damage to the
device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond
those indicated under "Recommended Operation Ratings" is not implied. Exposure to "Absolute Maximum Rat-
ings" for extended periods may affect device reliability.
Supply Voltage ±4 ± 18 V
120 30
25
o
RL=2K,TA=25 C
60 15
40 10
20 5
0 0
0 1 2 3 4 5 6 1 2 3 4 5 6
2x10 HZ 10 HZ 10 HZ 10 HZ 10 HZ 10 HZ 10 HZ 10 HZ 10 HZ 10 HZ 10 HZ 10 HZ 10 HZ
Frequency (HZ) Frequency (HZ)
Figure 4. Open Loop Voltage Gain vs. Frequency Figure 5. Maximum Output Voltage Swing vs. Frequency
3
30 10
Equivllent Input Noise Voltage (nV/(HZ) )
0.5
o
28 VCC=15V,VEE=-15V,TA=25 C
26 VCC=15V, VEE=-15V
Output Voltage Swing (V)
o
RS=50Ω,TA=25 C
24 2
10
22
20
18 1
10
16
14
12
0
10
0 1 2 3
0.1K 1K 10K 10 HZ 10 HZ 10 HZ 10 HZ
Load Resistance (kΩ) Frequency (HZ)
Figure 6. Maximum Output Voltage Swing Figure 7. Equivalent Input Noise Voltage vs. Frequency
vs. Load Resistance
80
1.2
70
1.1
VCC=15V V CC=15V
1.0 VEE=-15V 60 V EE=-15V
Offset Voltage (mV)
0.9
0.6 30
0.5
20
0.4
10
0.3
0.2 0
-25 0 25 50 75 100 125 -25 0 25 50 75 100 125
o o
Ambient Temperature ( C) Ambient Temperature ( C)
Figure 8. Input Offset Voltage vs. Temperature Figure 9. Input Bias Current vs. Temperature
Typical Application
R5 20K C1 10 µF
D1
R1 20K 1S1588
VIN
AZ4558 VO=VIN
AZ4558
D2
1S1588
R6 15K
R7 6.2K
DIP - 8
9.2±0.10 7.62±0.25
5°
6° 6°
0.7
1.46±0.31
3.30±0.30
4°
4°
φ3×0.15±0.05
0.254
2.54 0.28±0.07
0.457
10.0MAX
0.13MIN
6.60±0.50
R0.75
SOIC - 8
0.32
1.55±0.20
0.22±0.03
4.9±0.10
7°
8°
0.70±0.025
8°
0.2±0.10
7° D
6.00±0.20
D
20:1
0.20
φ0.8
4°
±4°
1.00
3.90±0.10
0.90
R0.15
R0.15
3°
±2°
0.42±0.09
http://www.aacmicro.com
USA: 1510 Montague Expressway, San Jose, CA 95131, USA Tel: 408-433-9888,Fax: 408-432-9888
China: 8th Floor, Zone B, 900 Yi Shan Road,Shanghai 200233, China Tel: 86-21-6495-9539, Fax: 86-21-6485-9673
Taiwan: 8F, No.50, Lane10, Kee Hu Road, Nei Hu, TaiPei 114, Taiwan Tel: 886-2-2657-8811, Fax: 886-2-2657-9090
IMPORTANT NOTICE
Advanced Analog Circuits Corporation reserves the right to make changes to its products or specifications at any time, without
notice, to improve design or performance and to supply the best possible product. Advanced Analog Circuits does not assume any
responsibility for use of any circuitry described other than the circuitry embodied in Advanced Analog Circuits' products. The
company makes no representation that circuitry described herein is free from patent infringement or other rights of Advanced Ana-
log Circuits Corporation.