Professional Documents
Culture Documents
GS Inverter Series8-12KW: Specifications
GS Inverter Series8-12KW: Specifications
Specifications
Model
GS8KW GS10KW GS12KW
Parameters
Nominal Power 8KW 10KW 12KW
Input Voltage Waveform Sinusoidal (utility or generator)
AC Nominal input Voltage 230Vac ±10%rms
Input Low Line Disconnect 184Vac±4%(Normal) or 135Vac±4%(Wide)
High Line Disconnect 263Vac±4%(Normal) or 263Vac±4%(Wide)
Max AC input Voltage Max 270Vac
Frequency 50Hz:41-54Hz, 60Hz:51-64Hz
Output Voltage Waveform Sine wave
AC
Power Factor 0.9~1.0
output
Nominal
Nominal Output
Output Voltage (V) 230Vac ±10%rms
Frequency (Hz) 50Hz ± 0.3Hz, 60Hz ± 0.3Hz
Rated Charge Current 60A
PV Inputopen
Max.PV Voltage range
circuit 60-110VDC
Solar array voltage 110VDC
charger Charger mode
PV Low Voltage MPPT
Re-connect
PV Low Voltage PV≥ Bat.V+3V
Disconnect PV≦Bat.V
Efficiency ≥ 97%
AC Nominal Charger 35A/50A/70A(According to the inverter model)
Charger Current 5 stages adjustable charging current
Over charge Protection Bat.V≥ 62.0VDC battery beeps 0.5s every 1s & fault after 60s
Efficiency(Battery Mode) ≥ 87%
Efficiency
Efficiency (Line Mode) >98%
Battery Nominal DC input Voltage 48VDC
Voltage Low Battery Alarm 42VDC±1.2VDC
High DC input
64VDC±1.2VDC
Alarm & Fault
Transfer
20ms(max)
Time 110%<load<150%,beeps 0.5s every 1s,and Fault after 60s off
Over-Load Protection the output,load>150%,beeps 0.5s every 1s,and Fault after 20s
System Output Short Circuit
Current limit (Fault after 10s)
Parameter Protection
Surge Rating(10s) 1:3(VA)
Power Saver Load≤ 25W(Enabled on "P/S auto"Setting of Remote control)
Protections Low battery, over charging, over load, over temp
Operating Temperature
0℃ to 40℃
Range
Storage Temperature ﹣15℃~60℃
General Operation humidity 5% to 95%(non-condensing)
Specifications
Audible Noise 60dB max
cooling Forced air,variable speed fan
Dimension(L*W*H) 627*416*204mm
Net Weight(kg) 52.5 58.5 66.5