Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 138 views

    Axe Microprocess 5 Digital Panel Meter: Key Introduce Operation Manual

    Uploaded by

    MOREE
    This document summarizes the features and operation of an AXE MICROPROCESS 5 DIGITAL PANEL METER. It has the following key capabilities: - Measures various input signals including DC, AC, temperature, and load cells. - Provides accuracy of 0.05% full scale and can display values from -19999 to 19999. - Saves settings in EEPROM memory which retains data for about 10 years. - Allows modifying settings like decimal point, display range, and average via password protected menus. - Provides concise operation instructions and error messages.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Axe Microprocess 5 Digital Panel Meter: Key Introduce Operation Manual

    Uploaded by

    MOREE
    138 views3 pages
    This document summarizes the features and operation of an AXE MICROPROCESS 5 DIGITAL PANEL METER. It has the following key capabilities: - Measures various input signals including DC, AC, temperature, and load cells. - Provides accuracy of 0.05% full scale and can display values from -19999 to 19999. - Saves settings in EEPROM memory which retains data for about 10 years. - Allows modifying settings like decimal point, display range, and average via password protected menus. - Provides concise operation instructions and error messages.

    Original Title

    MMS-H-EH

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document summarizes the features and operation of an AXE MICROPROCESS 5 DIGITAL PANEL METER. It has the following key capabilities: - Measures various input signals including DC, AC, temperature, and load cells. - Provides accuracy of 0.05% full scale and can display values from -19999 to 19999. - Saves settings in EEPROM memory which retains data for about 10 years. - Allows modifying settings like decimal point, display range, and average via password protected menus. - Provides concise operation instructions and error messages.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    138 views3 pages

    Axe Microprocess 5 Digital Panel Meter: Key Introduce Operation Manual

    Uploaded by

    MOREE
    This document summarizes the features and operation of an AXE MICROPROCESS 5 DIGITAL PANEL METER. It has the following key capabilities: - Measures various input signals including DC, AC, temperature, and load cells. - Provides accuracy of 0.05% full scale and can display values from -19999 to 19999. - Saves settings in EEPROM memory which retains data for about 10 years. - Allows modifying settings like decimal point, display range, and average via password protected menus. - Provides concise operation instructions and error messages.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 3

    AXE MICROPROCESS 5 DIGITAL PANEL METER (Low Power)(24*48mm) MMS-H Series

    ■ Features
    ◎ Measuring DCA/DCV/ACA/ACV/Potentiometer/Pt-100/Transmitter/Load Cell/Resistor….etc
    ◎ Accuracy 0.05% F.S.±1 digit ◎
    EEPROM Saving, data safekeeping about 10 years
    ◎ Display range -19999~19999 can be modified ◎
    Man-machine interface ,easy to operate
    ◎ Decimal point can be modified ◎
    M Modified inside parameter, must have pass code
    ◎ Display average can be modified(1~99) ◎
    CE Certification
    ■ Name Of Parts
    Display

    
    ENT   
    E Set-value down (Display
    DSPAN DZERO
    zero adjustment call out)

    Parameter ENTER (Function call out) Set-value up (Display span adjustment call out)
    Cursor shift

    Key Introduce Operation Manual


    Key Function 1.In normal display the key function is call out parameter setting page
    2.In parameter setting page the key function is data enter and go to next page
    Key Function In parameter setting page the parameter mark & data is alternate display. If need modify data can
    press shift key into setting procedure. The display is lock parameter data this time must let off key
    about 0.2 sec press again the cursor (twinkle express) is cycle moving left/right. (key response
    about 0.2 sec)
    Key Function In parameter setting page the parameter mark & data is alternate display. If need modify data can
    press up key into setting procedure. The display is lock parameter data this time must let off key
    about 0.2 sec press again the parameter data will increment. (key response about 0.2 sec)
    Key Function Into parameter setting page, the parameter mark & data is alternate display, If need modify data
    can press down key into setting procedure, The display is lock parameter data, this time must let
    off key about 0.2 sec, press again the parameter data will decrement. (Key Response about 0.2 sec)
    &Key Function  
    In setting group or setting page press & key return normal display, but if in setting page the
    modify data will be lost
    No Key in anything In setting page no key in anything about 2 minutes return normal display
    Step Parameter Mark Description Parameter Mark Operation Manual
    1
    Normal display
      Press /FUNC key into P.COD setting page
    in 5 digit pass code with && key
    2
    P.COD(Pass code input page)
     1.Key
    2.Press key, the pass code is right, into DP setting page, otherwise
     return to normal display
    3 DP(Decimal Point)  1. Decide decimal point position with & key (0 to 4)
    Default=0  2. Press key enter data and into DSPL setting page
    4 DSPL(Display Low Scale)  1.Decide display low scale with && key (-19999~19999)
    Default=0  2.Presskey enter data and into DSPH setting page
    5 DSPH(Display High Scale)  1.Decide display high scale with && key (-19999~19999)
    Default=99999  2.Presskey enter data and into AVG setting page
    6 AVG (Average)  1.Decide display Average times with && key (1~99)
    Default=5  2.Presskey enter data and into LCUT setting page
    7 LCUT (Low Cut)  1.Decide display low cut with && key (0~99)
    Default=0  2.Presskey enter data and into CODE setting page
    8 CODE(Pass Code)  1.Decide Pass code with &&key (0~19999)
    Default=0  2.Presskey enter data and return to normal display
    Step Parameter mark description Parameter mark Operation manual
    9 Normal display  Press /DZERO key about 3 sec, into DZERO adjustment page
    9-1 DZERO(Display Zero Adjust  1.Adjustment display zero with  or  key
    )Default=0  2.Press  key enter data and return to normal display
    Step Parameter mark description Parameter mark Operation manual
    10 Normal display  Press /DSPAN key about 3 sec, into DSPAN adjustment page
    10-1 DSPAN(Display Span Adjust  1.Adjustment display span with  or  key
    )Default=0  2.Press  key enter data and return to normal display
    Appendix Error Mark Description Error Mark Analyze & Description
    1 Input over error detect  Input signal over range (120%)
    2 Input under error detect  Input signal under range (-20%)
    3 Display over error detect  Display over range(99999)
    4 Display under error detect  Display under range(-19999)
    5 A/D Converter error detect  1. Input signal over range (180%)
    2. Inside circuit damage
    Please moving input signal if still display ADER, please contact us
    6 EEPROM error detect  1.External interference when EEPROM read/write
     2.EEPROM write over 100 million times(guarantee 10 years)
     Please power reset, if still display E-00,doing following step:

      
    1. E-00 & No alternate display for inquire reset EEPROM
    2. Decide Yes with or key, press key return normal display
    3.EEPROM was reset, Please follow step 1~10 set again
    MMS-H Calibrate Step

    Step Parameter Mark Description Parameter Mark Operation Manual


    1 Normal display  1.Press & key about 3sec.,into INLO setting page
    2 INLO(Input low calibrate  1.Input low signal and press  key read calibrate value
    setting page)  2.Wait display stability ,press  key enter data and into
    INHI setting page
    3 INHI(Input high calibrate  1.Input high signal and press  key read calibrate value
    setting page)  2.Wait display stability , Press  key enter data and into
    DP setting page

    You might also like