Bosch Rexroth AG

Spare parts list Service Hydraulics

An den Kelterwiesen 14
72160 Horb
Part No.: R902542778 Germany
+49 (0)7451/92-1207
Designation: AL A10VNO 63 DRS /52R-VRC12K01

Status of version: 5/2017 Date: 22.11.2018

Page: 1

Pos. Part No. Designation Quantity

1 R902542779 GH A10VNO 63 OV /52R-VRC12K01 1 ST L

2 R902452082 CONTROL VALVE 1 ST L

L = Assembly group D = Sealing element

Security notice
Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Karl Tragl (Vorsitzender / President) , Dr. Markus Forschner; Dr. Steffen Haack; Dr. Bertram Hoffmann
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Werner Struth
 Bosch Rexroth AG
Spare parts list Service Hydraulics
An den Kelterwiesen 14
72160 Horb
Part No.: R902542779 Germany
+49 (0)7451/92-1207
Drawing no.: R902467848
Designation: GH A10VNO 63 OV /52R-VRC12K01

Status of version: 5/2017 Date: 22.11.2018

Page: 2

Pos. Part No. Designation Quantity

1 R902448764 ROTARY GROUP 1 ST L

2 R902438263 CONTROL PISTON 1 ST
3 R902439068 PISTON ROD 1 ST
5 R902456349 PUMP HOUSING 1 ST
6 R902504119 ANSCHLUSSPLATTE HA10VNO63/52R12K01/K& 1 ST
7 R902425069 SWASHPLATE 1 ST
8 R902417400 DRIVE SHAFT 1 ST
9 R902447576 SCREW PLUG 1 ST
10 R910928606 SPRING 1 ST
12 R910938955 ADJUSTMENT SHIM 1 ST
14 R910987963 STOP RING 1 ST
15 R910704946 TAPERED-ROLLER BEARING 1 ST

L = Assembly group D = Sealing element

Security notice
Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Karl Tragl (Vorsitzender / President) , Dr. Markus Forschner; Dr. Steffen Haack; Dr. Bertram Hoffmann
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Werner Struth
 Bosch Rexroth AG
Spare parts list Service Hydraulics
An den Kelterwiesen 14
72160 Horb
Part No.: R902542779 Germany
+49 (0)7451/92-1207
Drawing no.: R902467848
Designation: GH A10VNO 63 OV /52R-VRC12K01

Status of version: 5/2017 Date: 22.11.2018

Page: 3

16 R910704954 TAPERED-ROLLER BEARING 1 ST D

17 R902445112 BEARING-LINER 2 ST
20 R910985471 SHAFT SEAL RING 1 ST D
21 R910905440 O-RING 1 ST D
24 R910942133 SEAL RING 1 ST D
25 R902403814 RETAINING RING 1 ST D
27 R910514195 ZYL.SCHR.M 12X 80 -10.9 DIN 912 #130NM 4 ST
31 R909831318 DOUBLE BREAK-OFF PLUG 1 ST D
33 R902533908 CYLINDER PIN 1 ST
34 R910967343 SCREW PLUG 1 ST D
38 R910943529 SPLINED HUB 1 ST
39 R910357049 O-RING 1 ST D
40 R910993660 FLAT HEAD SCREW 2 ST

L = Assembly group D = Sealing element

Security notice
Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Karl Tragl (Vorsitzender / President) , Dr. Markus Forschner; Dr. Steffen Haack; Dr. Bertram Hoffmann
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Werner Struth
 Bosch Rexroth AG
Spare parts list Service Hydraulics
An den Kelterwiesen 14
72160 Horb
Part No.: R902542779 Germany
+49 (0)7451/92-1207
Drawing no.: R902467848
Designation: GH A10VNO 63 OV /52R-VRC12K01

Status of version: 5/2017 Date: 22.11.2018

Page: 4

L = Assembly group D = Sealing element

Security notice
Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Karl Tragl (Vorsitzender / President) , Dr. Markus Forschner; Dr. Steffen Haack; Dr. Bertram Hoffmann
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Werner Struth
 Bosch Rexroth AG
Spare parts list Service Hydraulics
An den Kelterwiesen 14
72160 Horb
Part No.: R902448764 Germany
+49 (0)7451/92-1207
Drawing no.: R902415868
Designation: ROTARY GROUP

Status of version: 5/2017 Date: 22.11.2018

Page: 5

Pos. Part No. Designation Quantity

1 R902448765 ROTARY GROUP 1 ST L

2 R902448714 CONTROL PLATE 1 ST

L = Assembly group D = Sealing element

Security notice
Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Karl Tragl (Vorsitzender / President) , Dr. Markus Forschner; Dr. Steffen Haack; Dr. Bertram Hoffmann
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Werner Struth
 Bosch Rexroth AG
Spare parts list Service Hydraulics
An den Kelterwiesen 14
72160 Horb
Part No.: R902448764 Germany
+49 (0)7451/92-1207
Drawing no.: R902415868
Designation: ROTARY GROUP

Status of version: 5/2017 Date: 22.11.2018

Page: 6

L = Assembly group D = Sealing element

Security notice
Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Karl Tragl (Vorsitzender / President) , Dr. Markus Forschner; Dr. Steffen Haack; Dr. Bertram Hoffmann
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Werner Struth
 Bosch Rexroth AG
Spare parts list Service Hydraulics
An den Kelterwiesen 14
72160 Horb
Part No.: R902448765 Germany
+49 (0)7451/92-1207
Drawing no.: R902456314
Designation: ROTARY GROUP

Status of version: 5/2017 Date: 22.11.2018

Page: 7

Pos. Part No. Designation Quantity

1 R902448331 PISTON, COMPLETE 9 ST

2 R902448079 CYLINDER 1 ST
4 R902536898 RUECKZUGPLATTE A10VNO 63 SINTERED 1 ST
6 R902436450 RETAINING BALL 1 ST
7 R902436331 DRUCKFEDER 32,00 4,50 28,33 66& 1 ST
9 R902400725 PRESSURE PIN 3 ST
10 R902400726 SEEGER-V-RING 1 ST
11 R902400727 BACK-UP PLATE 1 ST

L = Assembly group D = Sealing element

Security notice
Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Karl Tragl (Vorsitzender / President) , Dr. Markus Forschner; Dr. Steffen Haack; Dr. Bertram Hoffmann
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Werner Struth
 Bosch Rexroth AG
Spare parts list Service Hydraulics
An den Kelterwiesen 14
72160 Horb
Part No.: R902448765 Germany
+49 (0)7451/92-1207
Drawing no.: R902456314
Designation: ROTARY GROUP

Status of version: 5/2017 Date: 22.11.2018

Page: 8

L = Assembly group D = Sealing element

Security notice
Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Karl Tragl (Vorsitzender / President) , Dr. Markus Forschner; Dr. Steffen Haack; Dr. Bertram Hoffmann
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Werner Struth
 Bosch Rexroth AG
Spare parts list Service Hydraulics
An den Kelterwiesen 14
72160 Horb
Part No.: R902452082 Germany
+49 (0)7451/92-1207
Drawing no.: R902452070
Designation: CONTROL VALVE

Status of version: 5/2017 Date: 22.11.2018

Page: 9

Pos. Part No. Designation Quantity

1 R902452069 CONTROL VALVE 1 ST L

2 R902434482 GASKET 1 ST D
3 R910900443 SOCKET-HEAD SCREW 4 ST D
4 R910764647 SCREW PLUG 1 ST D

L = Assembly group D = Sealing element

Security notice
Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Karl Tragl (Vorsitzender / President) , Dr. Markus Forschner; Dr. Steffen Haack; Dr. Bertram Hoffmann
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Werner Struth
 Bosch Rexroth AG
Spare parts list Service Hydraulics
An den Kelterwiesen 14
72160 Horb
Part No.: R902452082 Germany
+49 (0)7451/92-1207
Drawing no.: R902452070
Designation: CONTROL VALVE

Status of version: 5/2017 Date: 22.11.2018

Page: 10

L = Assembly group D = Sealing element

Security notice
Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Karl Tragl (Vorsitzender / President) , Dr. Markus Forschner; Dr. Steffen Haack; Dr. Bertram Hoffmann
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Werner Struth
 Bosch Rexroth AG
Spare parts list Service Hydraulics
An den Kelterwiesen 14
72160 Horb
Part No.: R902452069 Germany
+49 (0)7451/92-1207
Drawing no.: R902452068
Designation: CONTROL VALVE

Status of version: 5/2017 Date: 22.11.2018

Page: 11

Pos. Part No. Designation Quantity

1 R902434572 VALVE HOUSING 1 ST

2 R902420112 VALVE PISTON 1 ST D
3 R910920595 SPRING COLLAR 1 ST
4 R902449500 SPRING COLLAR 1 ST
5 R902451578 ADJUSTING PIECE 1 ST L
6 R902451580 ADJUSTING PIECE 1 ST L
7 R910900362 SHIM 1 ST D
8 R902451582 ORIFICE 1 ST
10 R910920596 SPRING 1 ST
11 R910707031 SPRING 1 ST
15 R910925518 ORIFICE 1 ST
17 R910933812 SCREW PLUG 2 ST

L = Assembly group D = Sealing element

Security notice
Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Karl Tragl (Vorsitzender / President) , Dr. Markus Forschner; Dr. Steffen Haack; Dr. Bertram Hoffmann
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Werner Struth
 Bosch Rexroth AG
Spare parts list Service Hydraulics
An den Kelterwiesen 14
72160 Horb
Part No.: R902452069 Germany
+49 (0)7451/92-1207
Drawing no.: R902452068
Designation: CONTROL VALVE

Status of version: 5/2017 Date: 22.11.2018

Page: 12

18 R910900311 VALVE PISTON 1 ST D

23 R910642827 BONDED SEAL RING 2 ST D

L = Assembly group D = Sealing element

Security notice
Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Karl Tragl (Vorsitzender / President) , Dr. Markus Forschner; Dr. Steffen Haack; Dr. Bertram Hoffmann
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Werner Struth
 Bosch Rexroth AG
Spare parts list Service Hydraulics
An den Kelterwiesen 14
72160 Horb
Part No.: R902452069 Germany
+49 (0)7451/92-1207
Drawing no.: R902452068
Designation: CONTROL VALVE

Status of version: 5/2017 Date: 22.11.2018

Page: 13

L = Assembly group D = Sealing element

Security notice
Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Karl Tragl (Vorsitzender / President) , Dr. Markus Forschner; Dr. Steffen Haack; Dr. Bertram Hoffmann
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Werner Struth
 Bosch Rexroth AG
Spare parts list Service Hydraulics
An den Kelterwiesen 14
72160 Horb
Part No.: R902451578 Germany
+49 (0)7451/92-1207
Drawing no.: R902451579
Designation: ADJUSTING PIECE

Status of version: 5/2017 Date: 22.11.2018

Page: 14

Pos. Part No. Designation Quantity

1 R902448797 SCREW PLUG 1 ST

3 R902445453 THREADED BOLT 1 ST
10 R910934194 HEXAGON NUT 1 ST
11 R910946269 BACKUP RINMG 1 ST
20 R910080519 O-RING 1 ST
21 R910919314 O-RING 1 ST D

L = Assembly group D = Sealing element

Security notice
Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Karl Tragl (Vorsitzender / President) , Dr. Markus Forschner; Dr. Steffen Haack; Dr. Bertram Hoffmann
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Werner Struth
 Bosch Rexroth AG
Spare parts list Service Hydraulics
An den Kelterwiesen 14
72160 Horb
Part No.: R902451578 Germany
+49 (0)7451/92-1207
Drawing no.: R902451579
Designation: ADJUSTING PIECE

Status of version: 5/2017 Date: 22.11.2018

Page: 15

L = Assembly group D = Sealing element

Security notice
Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Karl Tragl (Vorsitzender / President) , Dr. Markus Forschner; Dr. Steffen Haack; Dr. Bertram Hoffmann
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Werner Struth
 Bosch Rexroth AG
Spare parts list Service Hydraulics
An den Kelterwiesen 14
72160 Horb
Part No.: R902451580 Germany
+49 (0)7451/92-1207
Drawing no.: R902451581
Designation: ADJUSTING PIECE

Status of version: 5/2017 Date: 22.11.2018

Page: 16

Pos. Part No. Designation Quantity

1 R902474069 SCREW PLUG 1 ST

3 R902445453 THREADED BOLT 1 ST
4 R902417465 SHIM 1 ST
10 R910934194 HEXAGON NUT 1 ST
11 R910946269 BACKUP RINMG 1 ST
20 R910080519 O-RING 1 ST
21 R910919322 O-RING 1 ST D

L = Assembly group D = Sealing element

Security notice
Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Karl Tragl (Vorsitzender / President) , Dr. Markus Forschner; Dr. Steffen Haack; Dr. Bertram Hoffmann
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Werner Struth
 Bosch Rexroth AG
Spare parts list Service Hydraulics
An den Kelterwiesen 14
72160 Horb
Part No.: R902451580 Germany
+49 (0)7451/92-1207
Drawing no.: R902451581
Designation: ADJUSTING PIECE

Status of version: 5/2017 Date: 22.11.2018

Page: 17

L = Assembly group D = Sealing element

Security notice
Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Karl Tragl (Vorsitzender / President) , Dr. Markus Forschner; Dr. Steffen Haack; Dr. Bertram Hoffmann
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Werner Struth