Bosch Rexroth AG

Spare parts list Service Hydraulics

Glockeraustrasse 4

Material number: R902226059 89275 Elchingen

Germany
Drawing: R902210466
+49 (0)7308/82-2126
Designation: AXIAL-PISTON PUMP
A4VG145EP0DP0X0/40NRND6T11FA1S3BS00-S

Status of version: 08/2023 Date: 08.08.2023

Page: 1

Pos. Material number Designation Quantity

1 R902222670 ROTARY GROUP 1 UNIT L

2 R902188474 CONTROL 1 UNIT L
3 R902188461 PUMP HOUSING 1 UNIT L
4 R902252460 INTERNAL GEAR PUMP 1 UNIT L
5 R902197397 CONTROL MODULE 1 UNIT L
6 R902108693 BEARING FLANGE 1 UNIT L
98 R902095819 SEAL KIT 1 UNIT

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902226059 89275 Elchingen

Germany
Drawing: R902210466
+49 (0)7308/82-2126
Designation: AXIAL-PISTON PUMP
A4VG145EP0DP0X0/40NRND6T11FA1S3BS00-S

Status of version: 08/2023 Date: 08.08.2023

Page: 2

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902222670 89275 Elchingen

Germany
Drawing: R902108547
+49 (0)7308/82-2126
Designation: ROTARY GROUP

Status of version: 08/2023 Date: 08.08.2023

Page: 3

Pos. Material number Designation Quantity

1 R902244362 DRIVE SHAFT 1 UNIT L

2 R902279602 CRADLE 1 UNIT L
3 R902121230 ROTARY GROUP 1 UNIT L
4 R902097904 SEAL KIT 1 UNIT
5 R902132688 CONTROL PLATE, RIGHT-HAND ROTATION 1 UNIT

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902222670 89275 Elchingen

Germany
Drawing: R902108547
+49 (0)7308/82-2126
Designation: ROTARY GROUP

Status of version: 08/2023 Date: 08.08.2023

Page: 4

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902244362 89275 Elchingen

Germany
Drawing: R902108866
+49 (0)7308/82-2126
Designation: DRIVE SHAFT

Status of version: 08/2023 Date: 08.08.2023

Page: 5

Pos. Material number Designation Quantity

1 R902246813 DRIVE SHAFT 1 UNIT

10 R902603909 CYL. ROLLER BEARING 1 UNIT
11 R909084416 RETAINING RING 1 UNIT

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902244362 89275 Elchingen

Germany
Drawing: R902108866
+49 (0)7308/82-2126
Designation: DRIVE SHAFT

Status of version: 08/2023 Date: 08.08.2023

Page: 6

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902279602 89275 Elchingen

Germany
Drawing: R902201274
+49 (0)7308/82-2126
Designation: CRADLE

Status of version: 08/2023 Date: 08.08.2023

Page: 7

Pos. Material number Designation Quantity

1 R902279501 CRADLE 1 UNIT

2 R902130301 SLIDER 1 UNIT
3 R902273737 BEARING SHELL PAIR 1 UNIT
4 R902603577 CAGE PAIR 1 UNIT

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902279602 89275 Elchingen

Germany
Drawing: R902201274
+49 (0)7308/82-2126
Designation: CRADLE

Status of version: 08/2023 Date: 08.08.2023

Page: 8

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902121230 89275 Elchingen

Germany
Drawing: R902118841
+49 (0)7308/82-2126
Designation: ROTARY GROUP

Status of version: 08/2023 Date: 08.08.2023

Page: 9

Pos. Material number Designation Quantity

1 R902114100 CYLINDER 1 UNIT

2 R902118530 PISTON PAD 9 UNIT
11 R902188088 CUP-SPRING STACK 1 UNIT
20 R902096234 SHIM RING 1 UNIT
20 R902096235 SHIM RING 1 UNIT
20 R902096236 SHIM RING 1 UNIT
20 R902096237 SHIM RING 1 UNIT
24 R902205415 RETAINING PLATE 1 UNIT
25 R902240835 RETAINING BALL 1 UNIT
27 R902081969 WASHER 2 UNIT
29 R902096389 COMPRESSION SPRING 1 UNIT
41 R909151260 RETAINING RING 1 UNIT

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902121230 89275 Elchingen

Germany
Drawing: R902118841
+49 (0)7308/82-2126
Designation: ROTARY GROUP

Status of version: 08/2023 Date: 08.08.2023

Page: 10

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902188474 89275 Elchingen

Germany
Drawing: R902108834
+49 (0)7308/82-2126
Designation: CONTROL

Status of version: 08/2023 Date: 08.08.2023

Page: 11

Pos. Material number Designation Quantity

1 R902108831 POSITIONING PISTON 1 UNIT L

2 R902188473 COVER 1 UNIT L
3 R902188471 COVER 1 UNIT L
4 R902108786 BUSHING 2 UNIT
6 R909157477 HEXAGON NUT 1 UNIT
8 R909157169 RETAINING RING 2 UNIT
9 R909156280 O-RING 2 UNIT D

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902188474 89275 Elchingen

Germany
Drawing: R902108834
+49 (0)7308/82-2126
Designation: CONTROL

Status of version: 08/2023 Date: 08.08.2023

Page: 12

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902108831 89275 Elchingen

Germany
Drawing: RA60280840
+49 (0)7308/82-2126
Designation: POSITIONING PISTON

Status of version: 08/2023 Date: 08.08.2023

Page: 13

Pos. Material number Designation Quantity

1 R902108784 POSITIONING PISTON 1 UNIT

2 R902105710 ROD 1 UNIT
5 R902029756 RING 2 UNIT
5 R902105868 RING 2 UNIT
5 R902043149 RING 2 UNIT
5 R902029757 RING 2 UNIT
5 R902020498 RING 2 UNIT
5 R902020497 RING 2 UNIT
5 R902020496 RING 2 UNIT
5 R902020495 RING 2 UNIT
5 R902020494 RING 2 UNIT
5 R902020493 RING 2 UNIT
6 R902600767 LOCATING RING 2 UNIT

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902108831 89275 Elchingen

Germany
Drawing: RA60280840
+49 (0)7308/82-2126
Designation: POSITIONING PISTON

Status of version: 08/2023 Date: 08.08.2023

Page: 14

Pos. Material number Designation Quantity

7 R902108785 SPRING DISK 4 UNIT

8 R902095243 SPACER BUSHING 2 UNIT
8 R902095239 SPACER BUSHING 2 UNIT
8 R902095240 SPACER BUSHING 2 UNIT
8 R902095241 SPACER BUSHING 2 UNIT
8 R902095242 SPACER BUSHING 2 UNIT
9 R902108787 COMPRESSION SPRING 2 UNIT
15 R902280441 RETAINING RING 2 UNIT
19 R909086333 O-RING 1 UNIT D

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902108831 89275 Elchingen

Germany
Drawing: RA60280840
+49 (0)7308/82-2126
Designation: POSITIONING PISTON

Status of version: 08/2023 Date: 08.08.2023

Page: 15

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902188473 89275 Elchingen

Germany
Drawing: R902188472
+49 (0)7308/82-2126
Designation: COVER

Status of version: 08/2023 Date: 08.08.2023

Page: 16

Pos. Material number Designation Quantity

1 R902188470 COVER 1 UNIT

5 R909083088 SOCKET HEAD CAP SCREW 3 UNIT
6 R909085360 O-RING 1 UNIT D
8 R909151694 SCREW PLUG 1 UNIT D

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902188473 89275 Elchingen

Germany
Drawing: R902188472
+49 (0)7308/82-2126
Designation: COVER

Status of version: 08/2023 Date: 08.08.2023

Page: 17

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902188471 89275 Elchingen

Germany
Drawing: R902188472
+49 (0)7308/82-2126
Designation: COVER

Status of version: 08/2023 Date: 08.08.2023

Page: 18

Pos. Material number Designation Quantity

1 R902188469 COVER 1 UNIT

5 R909083088 SOCKET HEAD CAP SCREW 3 UNIT
6 R909085360 O-RING 1 UNIT D
8 R909151694 SCREW PLUG 1 UNIT D

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902188461 89275 Elchingen

Germany
Drawing: R902130492
+49 (0)7308/82-2126
Designation: PUMP HOUSING

Status of version: 08/2023 Date: 08.08.2023

Page: 19

Pos. Material number Designation Quantity

1 R902188459 PUMP HOUSING 1 UNIT L

2 R902215854 PRESSURE RELIEF VALVE 1 UNIT L
3 R902215854 PRESSURE RELIEF VALVE 1 UNIT L
4 R902228577 PRESSURE RELIEF VALVE 1 UNIT L
5 R902096368 PRESSURE CUT-OFF VALVE 1 UNIT L
6 R902115312 SHUTTLE VALVE 1 UNIT L

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902188461 89275 Elchingen

Germany
Drawing: R902130492
+49 (0)7308/82-2126
Designation: PUMP HOUSING

Status of version: 08/2023 Date: 08.08.2023

Page: 20

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902188459 89275 Elchingen

Germany
Drawing: RA89294230
+49 (0)7308/82-2126
Designation: PUMP HOUSING

Status of version: 08/2023 Date: 08.08.2023

Page: 21

Pos. Material number Designation Quantity

1 R902188458 PUMP HOUSING 1 UNIT

12 R909151979 SCREW PLUG 1 UNIT
13 R909151979 SCREW PLUG 1 UNIT
14 R909151979 SCREW PLUG 1 UNIT
15 R909151979 SCREW PLUG 1 UNIT
16 R909151979 SCREW PLUG 1 UNIT
17 R909151979 SCREW PLUG 1 UNIT
18 R909151979 SCREW PLUG 1 UNIT
20 R902603224 SCREW PLUG 1 UNIT
21 R909153815 SCREW PLUG 1 UNIT
22 R909151694 SCREW PLUG 1 UNIT
23 R909151694 SCREW PLUG 1 UNIT
24 R909153861 SCREW PLUG 1 UNIT

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902188459 89275 Elchingen

Germany
Drawing: RA89294230
+49 (0)7308/82-2126
Designation: PUMP HOUSING

Status of version: 08/2023 Date: 08.08.2023

Page: 22

Pos. Material number Designation Quantity

25 R909151692 SCREW PLUG 1 UNIT

27 R909153861 SCREW PLUG 1 UNIT
28 R902602898 SCREW PLUG 1 UNIT
29 R909831319 DOUBLE BREAK-OFF PLUG 2 UNIT
30 R909831320 DOUBLE BREAK-OFF PLUG 1 UNIT
34 R902105998 BUSHING 1 UNIT
35 R902105999 BUSHING 1 UNIT
37 R902095075 BUSHING 1 UNIT
43 R902078448 DOUBLE BREAK-OFF PLUG 1 UNIT
45 R909153862 SCREW PLUG 1 UNIT
46 R902210320 ECCENTRIC SCREW 1 UNIT
47 R909152975 SEALING NUT 1 UNIT

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902188459 89275 Elchingen

Germany
Drawing: RA89294230
+49 (0)7308/82-2126
Designation: PUMP HOUSING

Status of version: 08/2023 Date: 08.08.2023

Page: 23

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902215854 89275 Elchingen

Germany
Drawing:
+49 (0)7308/82-2126
Designation: PRESSURE RELIEF VALVE

Status of version: 08/2023 Date: 08.08.2023

Page: 24

Pos. Material number Designation Quantity

1 R902281064 PRESSURE RELIEF VALVE 1 UNIT L

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902281064 89275 Elchingen

Germany
Drawing: R902133814
+49 (0)7308/82-2126
Designation: PRESSURE RELIEF VALVE

Status of version: 08/2023 Date: 08.08.2023

Page: 25

Pos. Material number Designation Quantity

1 R902215897 SCREW PLUG 1 UNIT

2 R902272944 VALVE PLATE 1 UNIT
3 R902133905 VALVE STEM 1 UNIT
4 R902133881 EXPANSION PIECE 1 UNIT
5 R909921948 COMPRESSION SPRING 1 UNIT
6 R902215853 COMPRESSION SPRING 1 UNIT
7 R902133904 SETSCREW 1 UNIT
9 R902600900 O-RING 1 UNIT D
10 R909086432 O-RING 1 UNIT

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902281064 89275 Elchingen

Germany
Drawing: R902133814
+49 (0)7308/82-2126
Designation: PRESSURE RELIEF VALVE

Status of version: 08/2023 Date: 08.08.2023

Page: 26

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902228577 89275 Elchingen

Germany
Drawing: R902228785
+49 (0)7308/82-2126
Designation: PRESSURE RELIEF VALVE

Status of version: 08/2023 Date: 08.08.2023

Page: 27

Pos. Material number Designation Quantity

1 R902228578 SCREW PLUG 1 UNIT

2 R902228579 ADJUSTING SCREW 1 UNIT
3 R902089073 VALVE SPOOL 1 UNIT
4 R902089071 SPRING DISK 1 UNIT
5 R902113637 COMPRESSION SPRING 1 UNIT
8 R902600900 O-RING 1 UNIT D
9 R909087405 SEALING NUT 1 UNIT D

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902228577 89275 Elchingen

Germany
Drawing: R902228785
+49 (0)7308/82-2126
Designation: PRESSURE RELIEF VALVE

Status of version: 08/2023 Date: 08.08.2023

Page: 28

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902096368 89275 Elchingen

Germany
Drawing: R902094189
+49 (0)7308/82-2126
Designation: PRESSURE CUT-OFF VALVE

Status of version: 08/2023 Date: 08.08.2023

Page: 29

Pos. Material number Designation Quantity

1 R902106756 SCREW PLUG 1 UNIT

2 R902090832 SLEEVE 1 UNIT
3 R902133932 CONTROL PISTON 1 UNIT
4 R902106757 SPRING DISK 2 UNIT
5 R902254609 COMPRESSION SPRING 1 UNIT
6 R909432167 ADJUSTING SCREW 1 UNIT
10 R909830863 O-RING 1 UNIT
11 R909152707 SEALING NUT 1 UNIT

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902096368 89275 Elchingen

Germany
Drawing: R902094189
+49 (0)7308/82-2126
Designation: PRESSURE CUT-OFF VALVE

Status of version: 08/2023 Date: 08.08.2023

Page: 30

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902115312 89275 Elchingen

Germany
Drawing: R902115311
+49 (0)7308/82-2126
Designation: SHUTTLE VALVE

Status of version: 08/2023 Date: 08.08.2023

Page: 31

Pos. Material number Designation Quantity

1 R902133862 SHUTTLE VALVE 1 UNIT L

2 R902228516 STOP 1 UNIT
3 R910294829 SOCKET HEAD CAP SCREW 1 UNIT

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902115312 89275 Elchingen

Germany
Drawing: R902115311
+49 (0)7308/82-2126
Designation: SHUTTLE VALVE

Status of version: 08/2023 Date: 08.08.2023

Page: 32

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902133862 89275 Elchingen

Germany
Drawing: R902133863
+49 (0)7308/82-2126
Designation: SHUTTLE VALVE

Status of version: 08/2023 Date: 08.08.2023

Page: 33

Pos. Material number Designation Quantity

1 R902239025 SCREW PLUG 1 UNIT

2 R902105118 PISTON 1 UNIT
3 R902120762 SLEEVE 1 UNIT
4 R909083734 O-RING 1 UNIT
5 R909083749 O-RING 1 UNIT

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902133862 89275 Elchingen

Germany
Drawing: R902133863
+49 (0)7308/82-2126
Designation: SHUTTLE VALVE

Status of version: 08/2023 Date: 08.08.2023

Page: 34

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902252460 89275 Elchingen

Germany
Drawing: RA72869574
+49 (0)7308/82-2126
Designation: INTERNAL GEAR PUMP

Status of version: 08/2023 Date: 08.08.2023

Page: 35

Pos. Material number Designation Quantity

1 R902252456 HOUSING 1 UNIT L

2 R902269156 THROUGH DRIVE SHAFT 1 UNIT
3 R902105731 FLANGE 1 UNIT
4 R909083085 SOCKET HEAD CAP SCREW 4 UNIT
6 R913009671 STRAIGHT PIN 2 UNIT
7 2917850097 STRAIGHT PIN 1 UNIT
8 R913058594 O-RING 1 UNIT D
13 R913044774 O-RING 1 UNIT D

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902252460 89275 Elchingen

Germany
Drawing: RA72869574
+49 (0)7308/82-2126
Designation: INTERNAL GEAR PUMP

Status of version: 08/2023 Date: 08.08.2023

Page: 36

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902252456 89275 Elchingen

Germany
Drawing: RA61188702
+49 (0)7308/82-2126
Designation: HOUSING

Status of version: 08/2023 Date: 08.08.2023

Page: 37

Pos. Material number Designation Quantity

1 R913053886 WHEEL SET 1 UNIT

2 R902146552 HOUSING 1 UNIT
3 R902095075 BUSHING 1 UNIT
4 R902114238 WEAR PLATE 1 UNIT
5 R913007069 HOLDING PLUG 2 UNIT

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902252456 89275 Elchingen

Germany
Drawing: RA61188702
+49 (0)7308/82-2126
Designation: HOUSING

Status of version: 08/2023 Date: 08.08.2023

Page: 38

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902197397 89275 Elchingen

Germany
Drawing: R902197398
+49 (0)7308/82-2126
Designation: CONTROL MODULE

Status of version: 08/2023 Date: 08.08.2023

Page: 39

Pos. Material number Designation Quantity

1 R902102339 BASIC UNIT 1 UNIT L

2 R902603456 PROPORTIONAL SOLENOID 2 UNIT

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902197397 89275 Elchingen

Germany
Drawing: R902197398
+49 (0)7308/82-2126
Designation: CONTROL MODULE

Status of version: 08/2023 Date: 08.08.2023

Page: 40

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902102339 89275 Elchingen

Germany
Drawing: R902102340
+49 (0)7308/82-2126
Designation: BASIC UNIT

Status of version: 08/2023 Date: 08.08.2023

Page: 41

Pos. Material number Designation Quantity

1 R902115124 HOUSING 1 UNIT

3 R902115126 CONTROL PISTON 1 UNIT
4 R902168368 LEVER PAIR 1 UNIT
6 R902272777 ECCENTRIC PIN 1 UNIT
7 R902068165 COMPRESSION SPRING 1 UNIT
8 R902044854 WASHER 1 UNIT
9 R902113682 FEEDBACK LEVER 1 UNIT
10 R902603825 SEAL 1 UNIT D
11 R902097197 COVER 1 UNIT
12 R902168261 EXTENSION SPRING 1 UNIT
13 R902097155 SEAL 1 UNIT D
14 R902603686 SEALING PLUG 2 UNIT
15 R909083028 SOCKET HEAD CAP SCREW 4 UNIT

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902102339 89275 Elchingen

Germany
Drawing: R902102340
+49 (0)7308/82-2126
Designation: BASIC UNIT

Status of version: 08/2023 Date: 08.08.2023

Page: 42

Pos. Material number Designation Quantity

16 R913009677 STRAIGHT PIN 2 UNIT

21 R902601243 SOCKET HEAD CAP SCREW 1 UNIT
23 R902064222 WASHER 1 UNIT
23 R902051256 WASHER 1 UNIT
23 R902051255 WASHER 1 UNIT
23 R902051254 WASHER 1 UNIT
23 R902051253 WASHER 1 UNIT
23 R902051252 WASHER 1 UNIT
24 R909086301 O-RING 1 UNIT D
26 R902105435 WASHER 1 UNIT
26 R902105436 WASHER 1 UNIT
26 R902105437 WASHER 1 UNIT
26 R902105438 WASHER 1 UNIT

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902102339 89275 Elchingen

Germany
Drawing: R902102340
+49 (0)7308/82-2126
Designation: BASIC UNIT

Status of version: 08/2023 Date: 08.08.2023

Page: 43

Pos. Material number Designation Quantity

26 R902105439 WASHER 1 UNIT

26 R902105440 WASHER 1 UNIT
98 R992SP0026 SEAL KIT 1 UNIT

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902102339 89275 Elchingen

Germany
Drawing: R902102340
+49 (0)7308/82-2126
Designation: BASIC UNIT

Status of version: 08/2023 Date: 08.08.2023

Page: 44

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902108693 89275 Elchingen

Germany
Drawing: R902108694
+49 (0)7308/82-2126
Designation: BEARING FLANGE

Status of version: 08/2023 Date: 08.08.2023

Page: 45

Pos. Material number Designation Quantity

1 R902121353 BEARING FLANGE 1 UNIT

10 R909157434 O-RING 1 UNIT D
11 R902603583 SOCKET HEAD CAP SCREW 8 UNIT
12 R913009672 STRAIGHT PIN 2 UNIT

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902108693 89275 Elchingen

Germany
Drawing: R902108694
+49 (0)7308/82-2126
Designation: BEARING FLANGE

Status of version: 08/2023 Date: 08.08.2023

Page: 46

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner