Bosch Rexroth AG

Spare parts list Service Hydraulics

Glockeraustrasse 4

Material number: R992001595 89275 Elchingen

Germany
Drawing: R902063535
+49 (0)7308/82-2126
Designation: AXIAL-PISTON PUMP
A8VO200LA1S/63R1-NZG05F04X-S

Status of version: 06/2024 Date: 08.07.2024

Page: 1

Pos. Material number Designation Quantity

1 R902078533 AXIAL-PISTON PUMP 1 UNIT L

2 R902090411 CONTROL 1 UNIT L
5 R902075486 FLANGE 1 UNIT L
6 R902042397 CONNECTION PLATE 1 UNIT L
7 R902090487 HYDRAULIC LINE 1 UNIT L
8 R902090488 HYDRAULIC LINE 1 UNIT L
98 R902221388 SEAL KIT 1 UNIT

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R992001595 89275 Elchingen

Germany
Drawing: R902063535
+49 (0)7308/82-2126
Designation: AXIAL-PISTON PUMP
A8VO200LA1S/63R1-NZG05F04X-S

Status of version: 06/2024 Date: 08.07.2024

Page: 2

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902078533 89275 Elchingen

Germany
Drawing: R902033132
+49 (0)7308/82-2126
Designation: AXIAL-PISTON PUMP

Status of version: 06/2024 Date: 08.07.2024

Page: 3

Pos. Material number Designation Quantity

2 R902077332 ROTARY GROUP 1 UNIT L

3 R902075459 ROTARY GROUP 1 UNIT L
4 R902047182 HYDRAULIC GEAR PUMP 1 UNIT L
5 R902047183 PUMP HOUSING 1 UNIT
7 R902110457 TOOTHED WHEEL 1 UNIT
8 R902086580 PLUG-IN SHAFT 1 UNIT
20 R909083415 RETAINING RING 1 UNIT
21 R909831662 ROTARY SHAFT LIP-TYPE SEAL 1 UNIT D
22 R909083430 SHIM RING 1 UNIT D
23 R909153364 SCREW PLUG 1 UNIT D
24 R909151694 SCREW PLUG 3 UNIT D
25 R902601069 CYL. ROLLER BEARING 2 UNIT
27 R902601143 PARALLEL KEY 1 UNIT

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902078533 89275 Elchingen

Germany
Drawing: R902033132
+49 (0)7308/82-2126
Designation: AXIAL-PISTON PUMP

Status of version: 06/2024 Date: 08.07.2024

Page: 4

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902077332 89275 Elchingen

Germany
Drawing: RA75646075
+49 (0)7308/82-2126
Designation: ROTARY GROUP

Status of version: 06/2024 Date: 08.07.2024

Page: 5

Pos. Material number Designation Quantity

1 R902075457 ROTARY GROUP 1 UNIT L

2 R902209832 DRIVE SHAFT 1 UNIT L

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902077332 89275 Elchingen

Germany
Drawing: RA75646075
+49 (0)7308/82-2126
Designation: ROTARY GROUP

Status of version: 06/2024 Date: 08.07.2024

Page: 6

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902075457 89275 Elchingen

Germany
Drawing: RA87713325
+49 (0)7308/82-2126
Designation: ROTARY GROUP

Status of version: 06/2024 Date: 08.07.2024

Page: 7

Pos. Material number Designation Quantity

1 R902042247 CYLINDER 1 UNIT

2 R902050516 CONTROL LENS, RIGHT-HAND ROTATION 1 UNIT
3 R902080908 CENTER PIN 1 UNIT
4 R902031949 PISTON 7 UNIT
6 R902073933 SPRING DISK 1 UNIT L
7 R909418513 DISC SPRING 4 UNIT
11 R902033027 RETAINING PLATE 1 UNIT
12 R902602395 PAN-HEAD SCREW 14 UNIT

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902075457 89275 Elchingen

Germany
Drawing: RA87713325
+49 (0)7308/82-2126
Designation: ROTARY GROUP

Status of version: 06/2024 Date: 08.07.2024

Page: 8

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902073933 89275 Elchingen

Germany
Drawing:
+49 (0)7308/82-2126
Designation: SPRING DISK

Status of version: 06/2024 Date: 08.07.2024

Page: 9

Pos. Material number Designation Quantity

1 R902045069 SPRING DISK 1 UNIT

2 R902073946 SPRING DISK 1 UNIT
3 R902045070 SPRING DISK 1 UNIT
4 R902073947 SPRING DISK 1 UNIT
5 R902045071 SPRING DISK 1 UNIT
6 R902073948 SPRING DISK 1 UNIT
7 R902073949 SPRING DISK 1 UNIT
8 R902101944 SPRING DISK 1 UNIT

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902209832 89275 Elchingen

Germany
Drawing: RA75687473
+49 (0)7308/82-2126
Designation: DRIVE SHAFT

Status of version: 06/2024 Date: 08.07.2024

Page: 10

Pos. Material number Designation Quantity

1 R902077316 DRIVE SHAFT 1 UNIT

2 R902279208 SHIM RING 1 UNIT L
3 R902200176 SUPPORTING DISC 1 UNIT L
4 R902602389 RETAINING RING 1 UNIT
5 R909157648 TAPERED-ROLLER BEARING UNIT 1 UNIT
6 R909151103 TAPERED-ROLLER BEARING 1 UNIT

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902209832 89275 Elchingen

Germany
Drawing: RA75687473
+49 (0)7308/82-2126
Designation: DRIVE SHAFT

Status of version: 06/2024 Date: 08.07.2024

Page: 11

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902279208 89275 Elchingen

Germany
Drawing:
+49 (0)7308/82-2126
Designation: SHIM RING

Status of version: 06/2024 Date: 08.07.2024

Page: 12

Pos. Material number Designation Quantity

1 R902031915 SHIM RING 1 UNIT

2 R902031914 SHIM RING 1 UNIT
3 R902031913 SHIM RING 1 UNIT

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902200176 89275 Elchingen

Germany
Drawing:
+49 (0)7308/82-2126
Designation: SUPPORTING DISC

Status of version: 06/2024 Date: 08.07.2024

Page: 13

Pos. Material number Designation Quantity

1 R902031630 SUPPORTING DISC 1 UNIT

2 R902031631 SUPPORTING DISC 1 UNIT
3 R902031632 SUPPORTING DISC 1 UNIT
4 R902031633 SUPPORTING DISC 1 UNIT
5 R902031634 SUPPORTING DISC 1 UNIT
6 R902031635 SUPPORTING DISC 1 UNIT
7 R902031636 SUPPORTING DISC 1 UNIT
8 R902031637 SUPPORTING DISC 1 UNIT
9 R902283487 SUPPORTING DISC 1 UNIT
10 R902283488 SUPPORTING DISC 1 UNIT

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902075459 89275 Elchingen

Germany
Drawing: RA75711507
+49 (0)7308/82-2126
Designation: ROTARY GROUP

Status of version: 06/2024 Date: 08.07.2024

Page: 14

Pos. Material number Designation Quantity

1 R902283338 ROTARY GROUP 1 UNIT L

2 R902209834 DRIVE SHAFT 1 UNIT L

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902075459 89275 Elchingen

Germany
Drawing: RA75711507
+49 (0)7308/82-2126
Designation: ROTARY GROUP

Status of version: 06/2024 Date: 08.07.2024

Page: 15

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902283338 89275 Elchingen

Germany
Drawing: RA87713325
+49 (0)7308/82-2126
Designation: ROTARY GROUP

Status of version: 06/2024 Date: 08.07.2024

Page: 16

Pos. Material number Designation Quantity

1 R902042247 CYLINDER 1 UNIT

2 R902050517 CONTROL LENS, LEFT-HAND ROTATION 1 UNIT
3 R902080908 CENTER PIN 1 UNIT
4 R902031949 PISTON 7 UNIT
6 R902073933 SPRING DISK 1 UNIT L
7 R909418513 DISC SPRING 4 UNIT
11 R902033027 RETAINING PLATE 1 UNIT
12 R902602395 PAN-HEAD SCREW 14 UNIT

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902209834 89275 Elchingen

Germany
Drawing: RA75604845
+49 (0)7308/82-2126
Designation: DRIVE SHAFT

Status of version: 06/2024 Date: 08.07.2024

Page: 17

Pos. Material number Designation Quantity

1 R902073917 DRIVE SHAFT 1 UNIT

2 R902279209 SHIM RING 1 UNIT L
3 R902200176 SUPPORTING DISC 1 UNIT L
4 R902602389 RETAINING RING 1 UNIT
5 R902601626 TAPERED-ROLLER BEARING UNIT 1 UNIT
6 R909151103 TAPERED-ROLLER BEARING 1 UNIT

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902209834 89275 Elchingen

Germany
Drawing: RA75604845
+49 (0)7308/82-2126
Designation: DRIVE SHAFT

Status of version: 06/2024 Date: 08.07.2024

Page: 18

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902279209 89275 Elchingen

Germany
Drawing:
+49 (0)7308/82-2126
Designation: SHIM RING

Status of version: 06/2024 Date: 08.07.2024

Page: 19

Pos. Material number Designation Quantity

1 R909651586 SHIM RING 1 UNIT

2 R909651587 SHIM RING 1 UNIT
3 R909651588 SHIM RING 1 UNIT
4 R909651589 SHIM RING 1 UNIT
5 R909651590 SHIM RING 1 UNIT

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902047182 89275 Elchingen

Germany
Drawing: R902075173
+49 (0)7308/82-2126
Designation: HYDRAULIC GEAR PUMP

Status of version: 06/2024 Date: 08.07.2024

Page: 20

Pos. Material number Designation Quantity

1 0510525081 HYDRAULIC GEAR PUMP 1 UNIT L

10 R909083058 SOCKET HEAD CAP SCREW 2 UNIT

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902047182 89275 Elchingen

Germany
Drawing: R902075173
+49 (0)7308/82-2126
Designation: HYDRAULIC GEAR PUMP

Status of version: 06/2024 Date: 08.07.2024

Page: 21

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902090411 89275 Elchingen

Germany
Drawing: R902088702
+49 (0)7308/82-2126
Designation: CONTROL

Status of version: 06/2024 Date: 08.07.2024

Page: 22

Pos. Material number Designation Quantity

1 R909610429 COVER 2 UNIT L

2 R902090412 CONTROL MODULE 1 UNIT L
10 R902030556 CONTROL HOUSING 1 UNIT
11 R902031863 SEAL 1 UNIT D
12 R909921021 POSITIONING PISTON 2 UNIT
13 R909425458 POSITIONING STUD 2 UNIT
14 R909444578 SPRING DISK 2 UNIT
15 R909432558 COMPRESSION SPRING 2 UNIT
16 R902086612 PISTON 2 UNIT
17 R909445016 SETSCREW 2 UNIT
26 R909083716 HEXAGON SCREW 2 UNIT
37 R910921092 PISTON RING 4 UNIT D
42 R909083136 SOCKET HEAD CAP SCREW 8 UNIT

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902090411 89275 Elchingen

Germany
Drawing: R902088702
+49 (0)7308/82-2126
Designation: CONTROL

Status of version: 06/2024 Date: 08.07.2024

Page: 23

Pos. Material number Designation Quantity

43 R909083142 SOCKET HEAD CAP SCREW 4 UNIT

44 R913007909 STRAIGHT PIN 2 UNIT
45 R909831318 DOUBLE BREAK-OFF PLUG 1 UNIT
46 R909831319 DOUBLE BREAK-OFF PLUG 1 UNIT

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902090411 89275 Elchingen

Germany
Drawing: R902088702
+49 (0)7308/82-2126
Designation: CONTROL

Status of version: 06/2024 Date: 08.07.2024

Page: 24

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R909610429 89275 Elchingen

Germany
Drawing: R902238032
+49 (0)7308/82-2126
Designation: COVER

Status of version: 06/2024 Date: 08.07.2024

Page: 25

Pos. Material number Designation Quantity

1 R902283287 COVER 1 UNIT

10 R909150108 O-RING 1 UNIT D
11 R909085709 O-RING 1 UNIT D
12 R909083116 SOCKET HEAD CAP SCREW 4 UNIT
13 R909151692 SCREW PLUG 1 UNIT D
14 R902224081 SETSCREW 1 UNIT
15 R909152459 SEALING NUT 1 UNIT D

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R909610429 89275 Elchingen

Germany
Drawing: R902238032
+49 (0)7308/82-2126
Designation: COVER

Status of version: 06/2024 Date: 08.07.2024

Page: 26

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902090412 89275 Elchingen

Germany
Drawing: R902042296
+49 (0)7308/82-2126
Designation: CONTROL MODULE

Status of version: 06/2024 Date: 08.07.2024

Page: 27

Pos. Material number Designation Quantity

1 R902090413 CONTROL MODULE 1 UNIT L

3 R902036859 CONTROL HOUSING 1 UNIT
4 R909449944 CONTROL PISTON 2 UNIT
5 R909449344 SPRING BUSH 2 UNIT
6 R909651102 COMPRESSION SPRING 2 UNIT
7 R909420992 SETSCREW 2 UNIT
8 R902033447 SPRING DISK 2 UNIT
9 R909432511 SPRING DISK 2 UNIT
10 R909432560 COMPRESSION SPRING 2 UNIT
11 R909432559 COMPRESSION SPRING 2 UNIT
15 R909435552 SCREW PLUG 2 UNIT
16 R909421402 SETSCREW 2 UNIT
17 R902221507 SPRING DISK 2 UNIT

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902090412 89275 Elchingen

Germany
Drawing: R902042296
+49 (0)7308/82-2126
Designation: CONTROL MODULE

Status of version: 06/2024 Date: 08.07.2024

Page: 28

Pos. Material number Designation Quantity

18 R909410091 COMPRESSION SPRING 2 UNIT

19 R909432906 COMPRESSION SPRING 2 UNIT
20 R909418698 SPRING DISK 2 UNIT
21 R902288685 CONTROL PISTON 2 UNIT
22 R909431037 CONTROL SLEEVE 2 UNIT
25 R902600655 O-RING 4 UNIT D
27 R909151810 O-RING 2 UNIT
28 R909153364 SCREW PLUG 2 UNIT D
30 R909152425 SEALING NUT 4 UNIT D
31 R909083052 SOCKET HEAD CAP SCREW 6 UNIT
32 R909831319 DOUBLE BREAK-OFF PLUG 12 UNIT
33 R909083797 O-RING 2 UNIT
34 R909087626 BACKUP RING 2 UNIT

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902090412 89275 Elchingen

Germany
Drawing: R902042296
+49 (0)7308/82-2126
Designation: CONTROL MODULE

Status of version: 06/2024 Date: 08.07.2024

Page: 29

Pos. Material number Designation Quantity

35 R909156494 NOZZLE 2 UNIT

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902090412 89275 Elchingen

Germany
Drawing: R902042296
+49 (0)7308/82-2126
Designation: CONTROL MODULE

Status of version: 06/2024 Date: 08.07.2024

Page: 30

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902090413 89275 Elchingen

Germany
Drawing: R902094502
+49 (0)7308/82-2126
Designation: CONTROL MODULE

Status of version: 06/2024 Date: 08.07.2024

Page: 31

Pos. Material number Designation Quantity

1 R902090399 CONTROL HOUSING 1 UNIT

2 R909432554 CONTROL PISTON 2 UNIT
3 R909436677 CONTROL SLEEVE 2 UNIT
5 R909431195 PIN 2 UNIT
16 R909086730 O-RING 2 UNIT D
17 R902600655 O-RING 2 UNIT D
19 R909083027 SOCKET HEAD CAP SCREW 6 UNIT
20 R909831318 DOUBLE BREAK-OFF PLUG 6 UNIT
22 R909084149 STRAIGHT PIN 2 UNIT
25 R909151979 SCREW PLUG 2 UNIT

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902090413 89275 Elchingen

Germany
Drawing: R902094502
+49 (0)7308/82-2126
Designation: CONTROL MODULE

Status of version: 06/2024 Date: 08.07.2024

Page: 32

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902075486 89275 Elchingen

Germany
Drawing: R909732203
+49 (0)7308/82-2126
Designation: FLANGE

Status of version: 06/2024 Date: 08.07.2024

Page: 33

Pos. Material number Designation Quantity

1 R902110463 TOOTHED WHEEL 1 UNIT

2 R902036535 FLANGE 1 UNIT
10 R909086950 O-RING 1 UNIT D
11 R909085479 DEEP-GROOVE BALL BEARING 1 UNIT
12 R909150669 DEEP-GROOVE BALL BEARING 1 UNIT
13 R902602259 SOCKET HEAD CAP SCREW 4 UNIT
14 R909154589 O-RING 1 UNIT D

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902075486 89275 Elchingen

Germany
Drawing: R909732203
+49 (0)7308/82-2126
Designation: FLANGE

Status of version: 06/2024 Date: 08.07.2024

Page: 34

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902042397 89275 Elchingen

Germany
Drawing: R902033418
+49 (0)7308/82-2126
Designation: CONNECTION PLATE

Status of version: 06/2024 Date: 08.07.2024

Page: 35

Pos. Material number Designation Quantity

1 R902033414 CONNECTION PLATE 1 UNIT

2 R909426804 VALVE SPOOL 1 UNIT
3 R902030583 COMPRESSION SPRING 1 UNIT
4 R909409509 SCREW PLUG 1 UNIT
5 R909080511 WASHER 1 UNIT
10 R909083041 SOCKET HEAD CAP SCREW 2 UNIT
11 R909083753 O-RING 2 UNIT
12 R909083760 O-RING 1 UNIT
13 R900727801 PRESSURE REDUCING VALVE 2 UNIT
14 R909831318 DOUBLE BREAK-OFF PLUG 1 UNIT

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902042397 89275 Elchingen

Germany
Drawing: R902033418
+49 (0)7308/82-2126
Designation: CONNECTION PLATE

Status of version: 06/2024 Date: 08.07.2024

Page: 36

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902090487 89275 Elchingen

Germany
Drawing: R909731659
+49 (0)7308/82-2126
Designation: HYDRAULIC LINE

Status of version: 06/2024 Date: 08.07.2024

Page: 37

Pos. Material number Designation Quantity

1 R902090427 PIPE 1 UNIT

2 R909156779 THREADED FASTENER 2 UNIT L
5 R909152842 DOUBLE CLAMP 1 UNIT
6 R909083023 SOCKET HEAD CAP SCREW 1 UNIT
7 R909083611 HEXAGON NUT 1 UNIT

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902090487 89275 Elchingen

Germany
Drawing: R909731659
+49 (0)7308/82-2126
Designation: HYDRAULIC LINE

Status of version: 06/2024 Date: 08.07.2024

Page: 38

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R909156779 89275 Elchingen

Germany
Drawing:
+49 (0)7308/82-2126
Designation: THREADED FASTENER

Status of version: 06/2024 Date: 08.07.2024

Page: 39

Pos. Material number Designation Quantity

1 R909156348 O-RING 2 UNIT D

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902090488 89275 Elchingen

Germany
Drawing: R909731659
+49 (0)7308/82-2126
Designation: HYDRAULIC LINE

Status of version: 06/2024 Date: 08.07.2024

Page: 40

Pos. Material number Designation Quantity

1 R902090428 PIPE 1 UNIT

2 R909156779 THREADED FASTENER 2 UNIT L
5 R909152842 DOUBLE CLAMP 1 UNIT
6 R909083023 SOCKET HEAD CAP SCREW 1 UNIT
7 R909083611 HEXAGON NUT 1 UNIT

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner