200942315249490
200942315249490
Gear Pump Manufacturing (Pty) Ltd. (formerly Debex Cape) is a wholly owned subsidiary of Dosco
GPM Holdings, and a sister company to Dosco Precision Hydraulics, located in Johannesburg, and
ETS Foundry in Cape Town.
GPM, which is located at the southern tip of Africa in Cape Town, the mother city of the Republic of
South Africa, has been manufacturing its range of SAE mounted gear pumps since 1985.
GPM exports 70% of total production to 34 countries in North America, Europe, South East Asia
and Australasia.
The shareholders of Dosco GPM Holdings have committed the Group to a culture of Quality and
Service in an environment where continuous improvement is foremost.
STORES
Inventory
We have adopted the policy “If we don’t have it, we can’t sell it”
and therefore carry a large inventory at the plant in Cape Town
as well as at various distribution centers worldwide in order to get
the product closer to the client.
MACHINE SHOP
Porting and Assembly
Not only do we offer part sales, we also have porting and assembly
facilities in place to meet all your needs. Our staff concentrate
purely on gear pump and motor assembly and this focus ensures
consistently high quality products. .
TEST STAND
Technology & Testing
FOUNDRY
Foundry
The group invested in a new grey iron foundry in 2001. ETS
(Engineering Technology Services) is equipped with the latest
induction furnaces and uses resin bonded sand to produce its
moulds. The decision to employ these particular processes was
influenced by the groups commitment to the South Africa
environment. The foundries production is dedicated to the
requirements of GPM and has sufficient capacity to be able to
handle the expected growth of GPM into the year of 2008.
HOBBING
Quality Control
Customer Services
Computer Systems
Additional Services
All product listed herein is product manufactured and/or supplied by Gear Pump Manufacturing (Pty) Limited (“GPM”), a South African manufacturer and supplier of
replacement parts and components.
“Commercial Intertech” is a registered trademark or copyright of the Parker Hannifin Corporation (“Parker”). Any reference to this entity, its trademark, copyright,
product or reference number, is for product comparison and reference purposes only and as such, any referral thereto should not be construed as implying in any way
2 that Parker product is manufactured or supplied by GPM or that GPM is in any way associated with Parker.”
Manufactured in South Africa Copyright © 2005 Gear Pump Manufacturing (Pty) Limited All Rights Reserved. No part of this document may be reproduced in any form or manner without permission.
C o n t e n t s
Fasteners ...................................................................................................9
110 / 112.......................................................................................................10 - 12
120 .............................................................................................................13 - 16
125 .............................................................................................................17 - 19
215 .............................................................................................................32 - 35
230 .............................................................................................................36 - 39
250 .............................................................................................................40 - 43
265 .............................................................................................................44 - 47
Pump Identification.......................................................................................49
Porting..........................................................................................................50 - 51
Dump Pumps................................................................................................54
Warranty ......................................................................................................55
Contacts.......................................................................................................56
Pump & Motor
Specification
GEAR SIZE (IN) 0.50 0.75 1.00 1.25 1.50 1.75 2.00 2.25 2.50
130 DISPLACEMENT (CM3/REV) 16.00 24.10 32.20 40.30 48.30 56.40 64.50 72.60 80.00
131 130 PRESSURE RATING (BAR) 170 170 170 170 170 153 153 138 138
131 PRESSURE RATING (BAR) 205 205 205 205 205 170 170 153 153
GEAR SIZE (IN) 0.50 0.75 1.00 1.25 1.50 1.75 2.00 2.25 2.50
150 DISPLACEMENT (CM3/REV) 20.80 31.20 41.70 52.10 62.60 73.00 83.50 94.00 104.40
151 150 PRESSURE RATING (BAR) 170 170 170 170 170 135 135 135 135
125 151 PRESSURE RATING (BAR) 205 205 205 205 205 205 170 170 170
GEAR SIZE (IN) 0.75 1.00 1.25 1.50 1.75 2.00 2.25 2.50 2.75 3
175 DISPLACEMENT (CM3/REV) 50.30 67.10 84.00 100.60 117.50 134.30 151.00 168.00 184.50 200.00
176 175 PRESSURE RATING (BAR) 170 170 170 170 170 170 153 153 135 135
176 PRESSURE RATING (BAR) 205 205 205 205 205 170 170 170 135 135
* BUSHING RANGE 05 07 10 12 15 17 20 22 25 27 30
GEAR SIZE (IN) 0.50 0.75 1.00 1.25 1.50 1.75 2.00
215 DISPLACEMENT (CM3/REV) 10.00 15.00 20.00 25.00 30.20 35.30 40.00
PRESSURE RATING (BAR) 240 240 240 240 220 200 170
GEAR SIZE (IN) 0.50 0.75 1.00 1.25 1.50 1.75 2.00
230 DISPLACEMENT (CM3/REV) 16.00 24.00 32.30 40.30 48.30 56.30 64.40
PRESSURE RATING (BAR) 240 240 240 240 240 220 200
GEAR SIZE (IN) 0.50 0.75 1.00 1.25 1.50 1.75 2.00 2.25 2.50
250 DISPLACEMENT (CM3/REV) 20.80 31.20 41.60 52.00 62.50 73.00 83.40 94.00 103.00
PRESSURE RATING (BAR) 240 240 240 240 240 220 200 190 170
GEAR SIZE (IN) 0.75 1.00 1.25 1.50 1.75 2.00 2.25 2.50
265 DISPLACEMENT (CM3/REV) 44.00 59.00 73.50 88.00 102.00 118.00 132.60 147.00
PRESSURE RATING (BAR) 240 240 240 240 240 240 220 200
THE ABOVE DATA ARE AVERAGE RESULTS BASED ON A SERIES OF TESTS AND ARE NOT NECESSARILY REPRESENTATIVE
GP = PUMP
OF ANY SINGLE UNIT. GEAR PUMP MANUFACTURING RESERVES THE RIGHT TO AMEND THE TECHNICAL DATA WITHOUT NOTICE.
GM = MOTOR
GF = FLOW DIVIDER
GA = ADD A PUMP
GB = PIGGYBACK
GZ = PUMP / MOTOR COMBO
All product listed herein is product manufactured and/or supplied by Gear Pump Manufacturing (Pty) Limited (“GPM”), a South African manufacturer and supplier of
replacement parts and components.
“Commercial Intertech” is a registered trademark or copyright of the Parker Hannifin Corporation (“Parker”). Any reference to this entity, its trademark, copyright,
product or reference number, is for product comparison and reference purposes only and as such, any referral thereto should not be construed as implying in any way
2 that Parker product is manufactured or supplied by GPM or that GPM is in any way associated with Parker.”
Manufactured in South Africa Copyright © 2005 Gear Pump Manufacturing (Pty) Limited All Rights Reserved. No part of this document may be reproduced in any form or manner without permission.
Pa r t N u m b e r I d e n t i f i c a t i o n
X1 X2 X3 X4 X5 X6 X7 X8 X9
SEC 1 SEC SEC SEC SEC SEC 0
110 HOUSING 2 C101/151 0 PAD 0 PUMP 1 NORMAL 1 HOUSING 0
BEAR CARR 3 PAD 1 2 5/8" ROUND 1 MOTOR 2 SHORT 2 BEAR CARR 0
112 PEC 4 2 BOLT 2 2 3/4" A 2 HSG SIZE x HOUSING 0 PEC 0
GEAR SET 5 4 BOLT 3 4" B 3 BEAR CARR 0 BEAR CARR 0 DRIVE DIAMETER
113 CONT SHAFT 6 6 BOLT 4 5" C 4 PEC 0 PEC 0 5/8" 0
CONN SHAFT 7 2/4 BOLT 5 6" D 5 GEAR SIZE x DRIVE 3/4" 1
114 ACCESSORIES 8 HOUSING C101/151 6 CONT SHAFT 0 KEY 1 7/8" 2
PUMP 1 HSG SIZE x CONN SHAFT 0 6 SPLINE 0 1" 3
115 MOTOR 2 BEAR CARR 0 9 SPLINE 2 11/8" 4
BEAR CARR PEC 0 13 SPLINE 3 11/4" 5
120 1&1 1 GEAR SIZE x 14 SPLINE 4 13/4" 6
1&2 2 CONT SHAFT 0 15 SPLINE 5 CONT GEAR 0
125 PEC CONN SHAFT 0 CONT GEAR 0 CONN SHAFT 0
C101/151 0 CONN SHAFT
130 NORMAL 1 NORMAL 0
PORTED 2 30/30 330/330 1
131 TANDEM 3 330/315 2
MOTOR 4 50/50 350/350 3
137 C102 5 50/30 3
GEAR SET 350/315 4
150 INTEG NORM 1 350/330 5
INTEG SHORT 2 75/75 365/365 6
151 CONTI 3 365/315 7
CONTI SHAFT 365/330 8
175 NORMAL 1 365/350 9
SHORT 2
176 LONG 3
SPECIAL 4
215 CONN SHAFT
NORMAL 0
230 PIGGY BACK 1
250
ACCESSORIES ACCESSORIES ACCESSORIES ACCESSORIES ACCESSORIES
265 BEARING 0 BEARING BEARING 0 BEARING 0 BEARING 0
BUSH 0 ROLLER 1 BUSH 0 BUSH 0 BUSH 0
THRU PLATE 1 SHAFT 2 THRU PLATE 0 THRU PLATE 0 THRU PLATE 0
BOLT 2 ASSEMBLY 3 BOLT/STUD DIA BOLT/STUD LENGTH BOLT/STUD LENGTH
NUT 2 P25 BUSH 1/4" 4 SEE TABLE x 1/4" 1
STUD 2 SHAFT 3 5/16" 5 WASHER 0 3/8" 4
WASHER 2 CONN SHAFT 4 1/2" 1 RETAIN NUT 0 1/2" 2
RETAIN NUT 2 BUSH 0 9/16" 6 O-RING 0 3/4" 3
SNAP RING 3 THRUST PLATE 5/8" 2 BODY 0 WASHER 0
SPACER 4 WITH SEALS0 3/4" 3 SHAFT SEAL 0 RETAIN NUT 0
SEAL RETAIN 5 COMP 1 WASHER ID THRU PLATE SEALS O-RINGS
ROLL PIN 6 NON COMP 2 1/2" 1 CHANNEL 0 BACK\UP 0
DOWEL 6 MOTOR 3 5/8" 2 CHANN B/UP 1 SHAFT PUMP 1
SEAL 7 OEM 4 3/4" 3 OEM CHANN 2 RETAINER 2
PLUG/CHECK 8 RET NUT PUMP 0 THRUST 4 OEM B/UP 3 SHAFT MOTOR 3
GENERAL 9 RET NUT MOTOR1 RETAIN NUT 0 SIDE SEAL 4 SPOOL 4
KEY 9 BOLT 1 SHAFT SEAL SIDE B/UP 5 SHAFT SEAL 0
RING SEAL 9 STUD 2 PUMP INTEG 1 END SEAL 6 BODY 0
NUT 3 PUMP CONT 2 END B/UP 7 TH PL SEAL 0
X8 X8 WASH 4 MOTOR INTEG 3 POCKET 75 8 SPACER 0
STUDS BOLTS __ SNAP RING MOTOR CONT 4 POCKET 30/50 9 SPACER-1 1
9" A 3" A | SEC 1 WIPER 5 SPACER 0 SPACER-2 2
10" B 4" B | CONT SHAFT 2 THRU PLATE SEAL PLUG 0 PLUG 0
11" C 5" C | SPOOL 3 PUMP 1 CHECK 0 CHECK 0
12" D 6" D | SEALS MOTOR 2 SPRING 25X 0 GENERAL 0
13" E 7" E | SHAFT 1 POCKET 3 DETENT SPR 1 KEYS
14" F 8" F | BODY 2 BODY 0 SPOOL 2 1/4X3/8X11/4 1
15" G 0" G | THRU PLATE 3 O-RING 5 END CAP 3 1/4X3/8X1 2
16" H 1" H | O-RING 4 SPACERS DETENT RET 4 5/16X5/32X11/2 3
17" I 2" I | SPACER SPACER 0 DETENT BALL 5 DOWEL 0
18" J | SEAL 1 TA-1519-1 1 SPOOL END CA 6 ROLL PIN 0
19" K | CONT SHAFT 2 TA-1519-2 2 MOUNT BRACK 7 SEAL RETAINER
20" L | BEARING 3 TA-1519-3 3 SPOOL BRACK 8 NORMAL 0
21" M | SEAL BEARING 4 TA-1519-4 4 SLEEVE 9 DB-1669 1
22" N | PLUG 1 TA-1519-5 5 KEY 0 GA-1072 2
23" O | CHECK 2 TA-1519-6 6 DOWEL 0 GB-1669 3
24" P | GENERAL 0 TA-1519-7 7 ROLL PIN 0 SNAP RING 0
25" Q | KEY 2 TA-1519-8 8 SEAL RETAIN 0 RING SEAL 0
26" R | RV ASSEM 3 TA-1519-9 9 END CAP RET 1
27" S | DOWEL 0 PLUG 0 SNAP RING 0
28" T | ROLL PIN 1 CHECK 0 RING SEAL 0
29" U | SEAL RETAINER GENERAL 0
30" V | PUMP 0 KEY 0
| MOTOR 1 DOWEL 0
| ROLL PIN 0
| RING SEAL 1 SEAL RETAIN 0
| SNAP RING 0
| RING SEAL 0
|
All product listed herein is product manufactured and/or supplied by Gear Pump Manufacturing (Pty) Limited (“GPM”), a South African manufacturer and supplier of
replacement parts and components.
“Commercial Intertech” is a registered trademark or copyright of the Parker Hannifin Corporation (“Parker”). Any reference to this entity, its trademark, copyright,
product or reference number, is for product comparison and reference purposes only and as such, any referral thereto should not be construed as implying in any way
2 that Parker product is manufactured or supplied by GPM or that GPM is in any way associated with Parker.”
Manufactured in South Africa Copyright © 2005 Gear Pump Manufacturing (Pty) Limited All Rights Reserved. No part of this document may be reproduced in any form or manner without permission.
Q u i c k R e fe re n c e
SERIES OLD 20* 25* 31* 51* 76* 315* 330* 350* 365*
SERIES NEW 120 125 131 151 176 215 230 250 265
A SOLID SHAFT GEAR SET
3/4" KEY
7/8"
KEY 30 ADD-131-?? ADD-131-?? ADC-230-??
7/8"
KEY SHORT 66 ADK-215-??
1" KEY 43 AED-131-?? AED-131-?? ATD-151-?? AEC-230-?? ATF-250-??
11/4" KEY 11 ASD-151-?? AAL-176-?? ASF-250-?? AAG-265-??
9 SPLINE 5/8" SHORT 96 AZK-215-??
13 SPLINE 7/8" 25 ABD-131-?? ABD-131-?? AVD-151-?? ABC-230-?? AVF-250-??
13 SPLINE 7/8" SHORT 65 ABD-131-4-?? ABD-131-4-?? AVD-151-4-?? ABK-215-?? ABC-230-4-??
14 SPLINE 11/4" 07 APD-151-?? ANE-176-?? APF-250-?? ANG-265-??
14 SPLINE 11/4" SHORT 53 APD-151-4-??
15 SPLINE 1" 98 AAC-230-?? AAF-250-??
SPECIAL 17 SPLINE 11/8" (CASE) ACF-250-13
SPECIAL 14 SPLINE (CLARK) ACL-250-25
SPECIAL KEY 11/8" (JCB) AHC-230-??
SPECIAL 10 SPLINE (ING. RAND) AIR-265-07
SPECIAL TAPER 15/16" 7/8 " UNF ATH-131-17 ATH-230-17
SPECIAL TAPER KEYED ATK-215-??
C GEAR HOUSINGS
PUMP CRD-120-?? CMA-151-?? CRA-131-?? CMA-151-?? CSA-176-?? CRK-215-?? CRC-230-?? CMH-250-?? CSG-265-??
MOTOR CRD-120-?? CMA-151-?? CRA-131-?? CMA-151-?? CSA-176-?? CLK-215-?? CSC-230-?? CLF-250-?? CLG-265-??
E PORT END COVERS 120 125 131 151 176 215 230 250 265
STANDARD EXD-120 EZA-151 EXA-131 EZA-151 EYA-176
PORTED EUK-215 EUC-230 EWF-250 EWG-265
PORTED 4 PORT EXA-131-4 EZA-151-4 EUK-215-4 EWF-250-4 EWG-265-4
TANDEM EXK-215 EXC-230 EZF-250 EYG-265
MOTOR EUK-215-M EUC-230-M EUF-250-M EWG-265-M
FAN MOTOR EPK-215-M
FORD EFD-230
MOTOR EYG-265-M
PIGGYBACK STD EDC-131-24 EPB-176/131
PIGGYBACK CW EPB-230/215 CW EPB-250/215 CW EPB-265/230 CW
PIGGYBACK CCW EPB-230/215 CCW EPB-250/215 CCW EPB-265/230 CCW
ADD A PUMP 2 BOLT A CW EAAP-250 2BA CW EAAP-265 2BA CW
ADD A PUMP 2 BOLT A CCW EAAP-250 2BA CCW EAAP-265 2BA CCW
ADD A PUMP 2 BOLT B CW EAAP-250 2BB CW EAAP-265 2BB CW
ADD A PUMP 2 BOLT B CCW EAAP-250 2BB CCW EAAP-265 2BB CCW
Q u i c k R e fe re n c e
SERIES OLD 20* 25* 31* 51* 76* 315* 330* 350* 365*
SERIES NEW 120 125 131 151 176 215 230 250 265
F BEARING CARRIERS
STANDARD FVD-120 FKB-125 FVA-131 FTA-151 FZA-176
1 OUTLET FYK-215-1 FWC-230-1 FTF-250-1 FZG-265-1
2 OUTLET FYK-215-2 FWC-230-2 FTF-250-2 FZG-265-2
MOTOR FWC-230-M FTF-250-M FZG-265-M
3" SUCTION FZG-265-3
WITH DRAIN + PLUG FVA-131-11 FTA-151-11 FZA-176-11
G THRUST PLATES
PUMP GAA-131 GY-151 GAA-131 GY-151 GBA-176 GCI-215 GCI-230 GCI-250 GCI-265
MOTOR GM-215 GM-230 GM-250 GM-265
DRY VALVE BI ROTATION GBA-176 DV BI
DRY VALVE UNI ROTATION GBA-176 DV UNI
I CONNECTING SHAFTS
STANDARD IZA-131 ITA-125 IZA-131 IYA-151 IAB-176 IZK-215 IZC-230 IYF-250 IAG-265
ADD A PUMP TO 9 SPLINE IAAP-250/9SPL IAAP-265/9SPL
ADD A PUMP TO 13 SPLINE IAAP-250/13SPL IAAP-265/13SPL
ADD A PUMP TO 15 SPLINE IAAP-265/15SPL
PIGGYBACK IAF-131/131 IAD-151/131 IAH-176/131 IPB-230/215 IPB-250/215 IPB-265/230
J LOOSE SHAFTS
3/4" KEY JAV-131 JAV-131
7/8" KEY JAK-131 JWB-125 JAK-131 JCK-230
7/8" KEY WITH EXT THREAD JAX-131 JAX-131
1" KEY JED-131 JED-131 JAE-151 JGD-215 JCD-230
1 1/8" KEY JMT-131 JMT-131 JGT-151
1 1/4" KEY JAW-131 JRB-125 JAW-131 JAF-151 JAL-176 JCW-230
1 1/4" KEY LONG JAL-176-LONG
1 3/4" KEY UCHIDA JUC-176
CAT 910 TAPER W/RUFF JCA-131 JCA-131
6 SPLINE JAM-131 JHC-125 JAM-131 JAN-151
9 SPLINE 5/8" JAI-131 JAI-131
13 SPLINE 7/8" JAJ-131 JVB-125 JAJ-131 JAD-151
13 SPLINE 7/8" SHORT JAJ-131-SH JAJ-131-SH
13 SPLINE 1 3/4" JAS-176-SHD
14 SPLINE 1 1/4" JAH-131 JPB-125 JAH-131 JAG-151 JAS-176 JCH-230
14 SPLINE 1 1/4" LONG JAG-151-LONG JAS-176-LONG
15 SPLINE 1" JAU-131 JAU-131 JAT-151 JFG-250
17 SPLINE KOMATSU JKG-265
K BEARINGS/BUSHES
NEEDLE ROLLER KY-131 KS-151 KY-131 KS-151 KR-176
BUSHES KBUSH-215 KBUSH-230 KBUSH-250 KBUSH-265
SHAFT BALL BEARING KX-131-40 KX-125-8 KX-131-40 KX-151-58 KX-176-59 KX-215-215 KX-131-40 KX-151-58 KX-176-59
L SEALS
BODY SEALS LUB-120-239 LUB-151-244 LUB-131-242 LUB-151-244 LUB-176-252 LUB-215-239 LUB-131-242 LUB-250-244 LUB-265-250
MOTOR BODY SEAL LUB-215-239M
PUMP SEAL STANDARD LX-131-16 LX-125-13 LX-131-16 LX-151-17 LX-176-10 LX-215 LX-131-16 LX-151-17 LX-176-10
MOTOR SEAL STANDARD LX-131-9 LX-125-3 LX-131-9 LX-151-8 LX-176-1 LX-215-M LX-131-9 LX-151-8 LX-176-1
PUMP SEAL LOOSE SHAFT LX-131-18 LX-131-18 LX-131-18
MOTOR SEAL LOOSE SHAFT LX-131-11 LX-131-11 LX-131-11
PUMP SEAL VITON LX-131V-16 LX-125V-13 LX-131V-16 LX-151V-17 LX-176V-10 LX-131V-16 LX-151V-17 LX-176V-10
All product listed herein is product manufactured and/or supplied by Gear Pump Manufacturing (Pty) Limited (“GPM”), a South African manufacturer and supplier of
replacement parts and components.
“Commercial Intertech” is a registered trademark or copyright of the Parker Hannifin Corporation (“Parker”). Any reference to this entity, its trademark, copyright,
product or reference number, is for product comparison and reference purposes only and as such, any referral thereto should not be construed as implying in any way
2 that Parker product is manufactured or supplied by GPM or that GPM is in any way associated with Parker.”
Manufactured in South Africa Copyright © 2005 Gear Pump Manufacturing (Pty) Limited All Rights Reserved. No part of this document may be reproduced in any form or manner without permission.
Q u i c k R e fe re n c e
SERIES OLD 20* 25* 31* 51* 76* 315* 330* 350* 365*
SERIES NEW 120 125 131 151 176 215 230 250 265
M RETAINERS
SEAL RETAINER MOTOR MAV-125 MRA-176
SEAL RETAINER PUMP MGA-125 MRA-176
RETAINER NUT PUMP MW-125
RETAINER NUT MOTOR MLA-125
SEAL RETAINER TELLTALE MNA-230-1 MPA-250 MTT-265
N DOWELS
STANDARD NDOWEL-131 NDOWEL-131 NDOWEL-176 NDOWEL-215 NDOWEL-131 NDOWEL-131 NDOWEL-265
MOTOR NDOWEL-265M
P O-RINGS/POCKET SEALS
RETAINER O-RING PL-125-26 PL-176-164
POCKET SEAL PBA-131-2 PBA-131-2 PBA-131-2 PBA-176-3
PIGGYBACK PL-PB131-30 PL-PB176-159
Q SPACERS
SEAL SPACER QSA-125
INTERNAL SPACER QTA-125-?
BEARING SPACER QVB-131-2 QGB-125 QVB-131-2 QVB/AC-151 QVB-176
SHAFT SPACER QTB-131 QDB-125 QTB-131 QAF-176
SEAL SPACER MOTOR QAE-131 QAE-131 QAC-151 QAE-215
PIGGYBACK QAK-PB131 QAK-PB176
S SNAP RINGS/CIRCLIPS
SHAFT SX-131-100 SX-125-13 SX-131-100 SX-151-125 SX-176-137 SX-131-100 SX-151-125 SX-176-137
SHAFT END COVER SX-131-206 SX-131-206 SX-151-283 SX-176-315 SX-215 SX-131-206 SX-151-283 SX-176-315
V FASTENERS
BOLTS VBOLT 9/16" X? VBOLT 5/8" X ? VBOLT 5/8" X ? VBOLT 5/8" X ? VBOLT 5/8" X ? VBOLT 1/2" X ? VBOLT 5/8" X ? VBOLT 5/8" X ? VBOLT 5/8" X ?
NUTS VNUT 9/16" VNUT 5/8" VNUT 5/8" VNUT 5/8" VNUT 5/8" VNUT 1/2" VNUT 5/8" VNUT 5/8" VNUT 5/8"
WASHERS VWASHER 9/16" VWASHER 5/8" VWASHER 5/8" VWASHER 5/8" VWASHER 5/8" VWASHER 1/2" VWASHER 5/8" VWASHER 5/8" VWASHER 5/8"
STUDS VSTUD 9/16" X? VSTUD 5/8 X ? VSTUD 5/8 X ? VSTUD 5/8 X ? VSTUD 5/8 X ? VSTUD 1/2 X ? VSTUD 5/8 X ? VSTUD 5/8 X ? VSTUD 5/8 X ?
W SMALL PARTS
PLUG DRAIN WX-131-11 WX-131-11 WX-131-11 WX-131-11 WX-131-11
PLUG SHAFT END COVER WT-131-1391 WT-131-1391 WT-131-1391 WT-131-1391 WT-131-1391 WT-131-1391 WT-131-1391 WT-131-1391 WT-131-1391
CHECK VALVES WM-131-1391 WM-131-1391 WM-131-1391 WM-131-1391 WM-131-1391 WM-131-1391 WM-131-1391 WM-131-1391 WM-131-1391
Fa s t e n e r s
05 07 10 12 15 17 20 22 25 27 30 THREAD
BOLT FOR SINGLE 4.00 4.25 4.50 4.75 5.00 5.25 5.50 9
120 /16 " UNC
STUD FOR TANDEM ADD ON BEARING CARRIER WIDTH (2.50) PLUS HOUSING WIDTH TO BOLT LENGTH
BOLT FOR SINGLE 4.00 4.25 4.50 4.75 5.00 5.25 5.50 5.75 6.00 5
131 8 " UNC
STUD FOR TANDEM ADD ON BEARING CARRIER WIDTH (2.50) PLUS HOUSING WIDTH TO BOLT LENGTH
BOLT FOR SINGLE 3.75 4.00 4.25 4.50 4.75 5.00 5.25 5.50 5.75 5
151 8 " UNC
STUD FOR TANDEM ADD ON BEARING CARRIER WIDTH (2.88) PLUS HOUSING WIDTH TO BOLT LENGTH
BOLT FOR SINGLE 5.00 5.25 5.50 5.75 6.00 6.25 6.50 6.75 7.00 7.25 5
176 8 " UNC
STUD FOR TANDEM ADD ON BEARING CARRIER WIDTH (3.00) PLUS HOUSING WIDTH TO BOLT LENGTH
BOLT FOR SINGLE 2.75 3.00 3.25 3.50 3.75 4.00 4.25 1
215 2 " UNC
STUD FOR TANDEM ADD ON BEARING CARRIER WIDTH (2.62) PLUS HOUSING WIDTH TO BOLT LENGTH
BOLT FOR SINGLE 3.75 4.00 4.25 4.50 4.75 5.00 5.25 5
230 8 " UNC
STUD FOR TANDEM ADD ON BEARING CARRIER WIDTH (3.50) PLUS HOUSING WIDTH TO BOLT LENGTH
BOLT FOR SINGLE 3.75 4.00 4.25 4.50 4.75 5.00 5.25 5.50 5.75 5
250 8 " UNC
STUD FOR TANDEM ADD ON BEARING CARRIER WIDTH (3.50) PLUS HOUSING WIDTH TO BOLT LENGTH
BOLT FOR SINGLE 4.75 5.00 5.25 5.50 5.75 6.00 6.25 6.50 5
265 8 " UNC
STUD FOR TANDEM ADD ON BEARING CARRIER WIDTH (4.00) PLUS HOUSING WIDTH TO BOLT LENGTH
All product listed herein is product manufactured and/or supplied by Gear Pump Manufacturing (Pty) Limited (“GPM”), a South African manufacturer and supplier of
replacement parts and components.
“Commercial Intertech” is a registered trademark or copyright of the Parker Hannifin Corporation (“Parker”). Any reference to this entity, its trademark, copyright,
product or reference number, is for product comparison and reference purposes only and as such, any referral thereto should not be construed as implying in any way
2 that Parker product is manufactured or supplied by GPM or that GPM is in any way associated with Parker.”
Manufactured in South Africa Copyright © 2005 Gear Pump Manufacturing (Pty) Limited All Rights Reserved. No part of this document may be reproduced in any form or manner without permission.
SERIES 1 1 0 / 1 1 2
All product listed herein is product manufactured and/or supplied by Gear Pump Manufacturing (Pty) Limited (“GPM”), a South African manufacturer and supplier of
replacement parts and components.
“Commercial Intertech” is a registered trademark or copyright of the Parker Hannifin Corporation (“Parker”). Any reference to this entity, its trademark, copyright,
product or reference number, is for product comparison and reference purposes only and as such, any referral thereto should not be construed as implying in any way
2 that Parker product is manufactured or supplied by GPM or that GPM is in any way associated with Parker.”
Manufactured in South Africa Copyright © 2005 Gear Pump Manufacturing (Pty) Limited All Rights Reserved. No part of this document may be reproduced in any form or manner without permission.
SERIES 1 1 0 / 1 1 2
CODE GPM unique no. Description Factory No. Part No. Reference* Used
GEAR HOUSING
CC-110-15 hsg 110 Housing -15 0455-074-500 110-2115-00 314 8215 100 common
C CC-110-20 hsg
CC-101-25 hsg
110 Housing -20
110 Housing -25
0455-073-500
0455-072-500
110-2120-00
110-2125-00
314 8220 100
314 8225 100
common
common
THRUST PLATES
GC-110 tp 110 Thrust Plate 0455-075-500 110-8120-00 391 2185 016 110
G GY-151 tp 151 Thrust Plate 0450-036-500 151-1400-00 112
BEARINGS
K KS-151 roller brg 151/125 Roller Bearing 0425-118-200 151-8010-00 391 0381 059 common
SEALS
LX-151-3 motor seal 125 Shaft Seal Motor C 0455-199-200 125-8714-00 110
L LUB-151-244 bs 125/151 Body Seal 0425-117-200 151-8720-00 391 2884 021 common
LX-151-8 motor seal 151 Shaft Seal Motor I 0450-101-200 151-8713-00 391 2883 115 112
RING SEALS
O ONB-151-1 ring seal 151 Ring Seal 0450-038-200 151-8910-00 391 2585 009 common
O-RINGS
P PBA-131-2 ps 131/151 Pocket Seal for 2 plates 0430-107-200 XXX-8743-90 391 2882 051 common
SPACERS
Q QVB/AC-151 spacer 151 Bearing Spacer 0450-039-200 151-8440-00 391 3383 087 112
KEYS
R RX-13 key 290 Key 1/4" x 3/8" x 1 1/4" 0425-130-200 XXX-8920-01 391 1781 021 110
SNAP RINGS
SX-151-283 snap ring 151 Snap Ring SEC 0450-103-200 151-8310-00 391 2686 065 112
S SX-110-283 snap ring 110 Snap Ring SEC 0455-196-200 110-8310-00 110
V VBOLT 5/8" X 7.50" ext thrd 290 Bolt 5/8" UNC 0455-185-200 110
VSTUD 5/8" X 07.5" 290 Stud 5/8" unc 07.5" 0484-075-500 XXX-8222-X2 391 1425 110 112
VWASHER 5/8" 290-131/151/230/250 5/8" washer 0450-177-500 XXX-8242-00 391 3784 028 common
VNUT 5/8" 290-5/8" Nut 0455-176-200 XXX-8230-00 391 1451 076 common
All product listed herein is product manufactured and/or supplied by Gear Pump Manufacturing (Pty) Limited (“GPM”), a South African manufacturer and supplier of
replacement parts and components.
“Commercial Intertech” is a registered trademark or copyright of the Parker Hannifin Corporation (“Parker”). Any reference to this entity, its trademark, copyright,
product or reference number, is for product comparison and reference purposes only and as such, any referral thereto should not be construed as implying in any way
2 that Parker product is manufactured or supplied by GPM or that GPM is in any way associated with Parker.”
Manufactured in South Africa Copyright © 2005 Gear Pump Manufacturing (Pty) Limited All Rights Reserved. No part of this document may be reproduced in any form or manner without permission.
SERIES 1 1 0 / 1 1 2
CODE GPM unique no. Description Factory No. Part No. Reference* Used
GENERAL
WGP-110-MB 110 Mounting Bracket 0455-096-200 110-8900-70 314 0100 005 110
All product listed herein is product manufactured and/or supplied by Gear Pump Manufacturing (Pty) Limited (“GPM”), a South African manufacturer and supplier of
replacement parts and components.
“Commercial Intertech” is a registered trademark or copyright of the Parker Hannifin Corporation (“Parker”). Any reference to this entity, its trademark, copyright,
product or reference number, is for product comparison and reference purposes only and as such, any referral thereto should not be construed as implying in any way
2 that Parker product is manufactured or supplied by GPM or that GPM is in any way associated with Parker.”
Manufactured in South Africa Copyright © 2005 Gear Pump Manufacturing (Pty) Limited All Rights Reserved. No part of this document may be reproduced in any form or manner without permission.
SERIES 1 2 0
All product listed herein is product manufactured and/or supplied by Gear Pump Manufacturing (Pty) Limited (“GPM”), a South African manufacturer and supplier of
replacement parts and components.
“Commercial Intertech” is a registered trademark or copyright of the Parker Hannifin Corporation (“Parker”). Any reference to this entity, its trademark, copyright,
product or reference number, is for product comparison and reference purposes only and as such, any referral thereto should not be construed as implying in any way
2 that Parker product is manufactured or supplied by GPM or that GPM is in any way associated with Parker.”
Manufactured in South Africa Copyright © 2005 Gear Pump Manufacturing (Pty) Limited All Rights Reserved. No part of this document may be reproduced in any form or manner without permission.
SERIES 1 2 0
CODE GPM unique no. Description Factory No. Part No. Reference*
B BV-131-15 gs
BV-131-17 gs
131 Gear Set -15
131 Gear Set -17
0330-015-100
0330-016-100
131-5315-00
131-5317-00
312 2815 000
312 2817 000
BV-131-20 gs 131 Gear Set -20 0330-017-100 131-5320-00 312 2820 000
BV-131-22 gs 131 Gear Set -22 0330-018-100 131-5322-00 312 2822 000
BV-131-25 gs 131 Gear Set -25 0330-019-100 131-5325-00 312 2825 000
GEAR HOUSINGS
CRD-120-05 hsg 120 Housing -05 0420-005-501 120-2105-00 308 8005 100
CRD-120-07 hsg 120 Housing -07 0420-007-501 120-2107-00 308 8007 100
C CRD-120-10 hsg
CRD-120-12 hsg
120 Housing -10
120 Housing -12
0420-010-501
0420-012-501
120-2110-00
120-2112-00
308 8010 100
308 8012 100
CRD-120-15 hsg 120 Housing -15 0420-015-501 120-2115-00 308 8015 100
CRD-120-17 hsg 120 Housing -17 0420-017-501 120-2117-00 308 8017 100
CRD-120-20 hsg 120 Housing -20 0420-020-501 120-2120-00 308 8020 100
D DED-120 4b4" sec 120 SEC 4 Bolt 4" B 0420-042-501 120-1331-00 308 5030 201
DFD-120 6b sec 120 SEC 6 Bolt Round 0420-043-501 120-1411-10 308 5043 201
DGD-120 2b4" sec 120 SEC 2 Bolt 4" B 0420-040-501 120-1231-10 308 5020 201
DGD-120 2b4" sh sec 120 SEC 2 Bolt 4" B Short 0420-048-501 120-1231-20 308 5029 205
DWD-120 2b3 1/4" sec 120 SEC 2 Bolt 3º" A 0420-041-501 120-1221-10 308 5020 204
E EXD-120 pec 120 PEC port end cover 0420-030-501 120-4100-00 308 3100 100
BEARING CARRIERS
All product listed herein is product manufactured and/or supplied by Gear Pump Manufacturing (Pty) Limited (“GPM”), a South African manufacturer and supplier of
replacement parts and components.
“Commercial Intertech” is a registered trademark or copyright of the Parker Hannifin Corporation (“Parker”). Any reference to this entity, its trademark, copyright,
product or reference number, is for product comparison and reference purposes only and as such, any referral thereto should not be construed as implying in any way
2 that Parker product is manufactured or supplied by GPM or that GPM is in any way associated with Parker.”
Manufactured in South Africa Copyright © 2005 Gear Pump Manufacturing (Pty) Limited All Rights Reserved. No part of this document may be reproduced in any form or manner without permission.
SERIES 1 2 0
CODE GPM unique no. Description Factory No. Part No. Reference*
THRUST PLATES
CONNECTING SHAFT
CONTINENTAL SHAFTS
JAH-131 14spl cds 131 1 1/4" 14 Spl Shaft 0430-054-500 131-6100-45 312 1135 133
JAI-131 9spl cds 131 5/8" 9 Spl Shaft 0430-061-500 131-6100-20 312 1000 200
JAJ-131 13spl cds 131 7/8" 13 Spl Shaft 0430-051-500 131-6100-32 312 1135 138
JAJ-131 13spl sh cds 131 7/8" 13 Spl Shaft Short 0430-052-500 131-6200-32 SPECIAL
JAK-131 7/8" key cds 131 7/8" Key Shaft 0430-059-500 131-6100-12 312 1500 300
JAM-131 6spl cds 131 6 Spl Shaft 0430-068-500 131-6400-03 312 1000 003
J JAU-131 15spl cds 131 1" 15 Spl Shaft 0430-063-500 131-6100-53 SPECIAL
JAV-131 3/4" key cds 131 3/4" Key Shaft 0430-057-500 131-6100-11 312 1135 152
JAW-131 1 1/4" key cds 131 1 1/4" Key Shaft 0430-067-500 131-6100-15 SPECIAL
JAX-131 7/8" thrd cds 131 7/8" Key Threaded Shaft 0430-058-500 131-6400-12 312 1135 171
JED-131 1" key cds 131 1" Key Shaft 0430-060-500 131-6100-13 312 1500 400
JMT-131 1 1/8" key cds 131 1 1/8" Key Shaft 0430-056-500 131-6100-14 SPECIAL
BEARINGS
KX-131-40 shaft brg 131/230 Shaft Bearing 0430-105-200 131-8020-00 391 0381 040
K KY-131 roller brg 131 Roller Bearing 0430-104-200 131-8010-00 391 0381 068
SEALS
LUB-120-239 bs 120 Body Seal 0420-108-200 120-8720-00 391 2884 019
LX-131-11 motor seal 131 Shaft Seal Motor C 0430-121-200 131-8713-00 391 2883 126
RING SEALS
O OLB-131-1 ring seal 131 Ring Seal 0430-036-200 131-8910-00 391 2585 006
O-RINGS
P PBA-131-2 ps 131/151 Pocket Seal for 2 plates 0430-107-200 XXX-8743-90 391 2882 051
SPACERS
QAE-131 s/spacer 131 Seal Spacer 0430-041-500 131-8410-00 391 3381 040
Q QTB-131 shaft spacer 131 Shaft Spacer 0430-066-500 131-8420-00 312 0100 002
QVB-131-2 brg spacer 131 Bearing Spacer 0430-042-500 131-8430-02 391 3383 069
KEYS
RX-113 key 290 Key 0451-010-200 XXX-8920-04 391 1781 020
RX-13 key 290 Key 1/4" x 3/8" x 1 1/4" 0425-130-200 XXX-8920-01 391 1781 021
RX-16 key 290 Key 1/4" x 1/4" x 1 1/4" 0425-132-200 XXX-8920-05 391 1781 082
RX-17 key 290 Key 1/4" x 3/8" x 1 " 0430-122-200 XXX-8920-02 391 1781 025
R RX-18 key
RX-19 key
290 Key 1/4" x 1/4" x 1"
290 Key 5/16" x 5/16" x 1 1/2"
0430-123-200
0425-133-200
XXX-8920-05
XXX-8920-06
391 1781 085
391 1781 083
RX-20 key 290 Key 19 x 1.25 .28 0415-140-200 XXX-8920-04 391 1781 027
RX-38 key 290 Key 5/16" x 15/32" x 1 1/2" 0425-129-200 XXX-8920-03 391 1781 045
RX-54 key 290 Key 5/16" x 5/16" x 1 1/4" 0430-124-200 XXX-8920-07 391 1781 007
SNAP RINGS
SX-131-100 snap ring 131/230 Snap Ring Shaft 0425-109-200 XXX-8320-00 391 2685 011
S SX-131-206 snap ring 131/230 Snap Ring SEC 0425-110-200 XXX-8310-00 391 2686 063
All product listed herein is product manufactured and/or supplied by Gear Pump Manufacturing (Pty) Limited (“GPM”), a South African manufacturer and supplier of
replacement parts and components.
“Commercial Intertech” is a registered trademark or copyright of the Parker Hannifin Corporation (“Parker”). Any reference to this entity, its trademark, copyright,
product or reference number, is for product comparison and reference purposes only and as such, any referral thereto should not be construed as implying in any way
2 that Parker product is manufactured or supplied by GPM or that GPM is in any way associated with Parker.”
Manufactured in South Africa Copyright © 2005 Gear Pump Manufacturing (Pty) Limited All Rights Reserved. No part of this document may be reproduced in any form or manner without permission.
SERIES 1 2 0
CODE GPM unique no. Description Factory No. Part No. Reference*
GENERAL
WM-1391-K check valve 290 Check Valve SEC 0431-001-200 XXX-8820-00 391 3681 001
W WT-131-1391 plug 290 Plug SEC 0431-002-200 XXX-8810-00 391 2286 004
WX-131-11 plug 290 Plug 1/4" npt 0475-111-200 XXX-8810-00 391 2281 010
All product listed herein is product manufactured and/or supplied by Gear Pump Manufacturing (Pty) Limited (“GPM”), a South African manufacturer and supplier of
replacement parts and components.
“Commercial Intertech” is a registered trademark or copyright of the Parker Hannifin Corporation (“Parker”). Any reference to this entity, its trademark, copyright,
product or reference number, is for product comparison and reference purposes only and as such, any referral thereto should not be construed as implying in any way
2 that Parker product is manufactured or supplied by GPM or that GPM is in any way associated with Parker.”
Manufactured in South Africa Copyright © 2005 Gear Pump Manufacturing (Pty) Limited All Rights Reserved. No part of this document may be reproduced in any form or manner without permission.
SERIES 1 2 5
All product listed herein is product manufactured and/or supplied by Gear Pump Manufacturing (Pty) Limited (“GPM”), a South African manufacturer and supplier of
replacement parts and components.
“Commercial Intertech” is a registered trademark or copyright of the Parker Hannifin Corporation (“Parker”). Any reference to this entity, its trademark, copyright,
product or reference number, is for product comparison and reference purposes only and as such, any referral thereto should not be construed as implying in any way
2 that Parker product is manufactured or supplied by GPM or that GPM is in any way associated with Parker.”
Manufactured in South Africa Copyright © 2005 Gear Pump Manufacturing (Pty) Limited All Rights Reserved. No part of this document may be reproduced in any form or manner without permission.
SERIES 1 2 5
CODE GPM unique no. Description Factory No. Part No. Reference*
B BKA-125-15 gs
BKA-125-17 gs
125 Gear Set -15
125 Gear Set -17
0325-015-100
0325-016-100
125-5315-00
125-5317-00
303 2815 000
303 2817 000
BKA-125-20 gs 125 Gear Set -20 0325-017-100 125-5320-00 303 2820 000
BKA-125-22 gs 125 Gear Set -22 0325-018-100 125-5322-00 303 2822 000
BKA-125-25 gs 125 Gear Set -25 0325-019-100 125-5325-00 303 2825 000
GEAR HOUSINGS
CMA-151-05 hsg 151 Housing -05 0425-005-501 151-2105-00 313 8205 100
CMA-151-07 hsg 151 Housing -07 0425-007-501 151-2107-00 313 8207 100
CMA-151-10 hsg 151 Housing -10 0425-010-501 151-2110-00 313 8210 100
CMA-151-12 hsg 151 Housing -12 0425-012-501 151-2112-00 313 8212 100
C CMA-151-15 hsg 151 Housing -15 0425-015-501 151-2115-00 313 8215 100
CMA-151-17 hsg 151 Housing -17 0425-017-501 151-2117-00 313 8217 100
CMA-151-20 hsg 151 Housing -20 0425-020-501 151-2120-00 313 8220 100
CMA-151-22 hsg 151 Housing -22 0425-022-501 151-2122-00 313 8222 100
CMA-151-25 hsg 151 Housing -25 0425-025-501 151-2125 00 313 8225 100
BEARING CARRIERS
THRUST PLATES
CONNECTING SHAFT
CONTINENTAL SHAFTS
JHB-125 7/8" key cds 125 7/8" Key Shaft 0425-053-500 125-6100-12 303 1135 012
JHC-125 6spl cds 125 1" 6 Spl Shaft 0425-052-500 125-6100-02 303 1135 013
BEARINGS
KS-151 roller brg 151/125 Roller Bearing 0425-118-200 151-8010-00 391 0381 059
All product listed herein is product manufactured and/or supplied by Gear Pump Manufacturing (Pty) Limited (“GPM”), a South African manufacturer and supplier of
replacement parts and components.
“Commercial Intertech” is a registered trademark or copyright of the Parker Hannifin Corporation (“Parker”). Any reference to this entity, its trademark, copyright,
product or reference number, is for product comparison and reference purposes only and as such, any referral thereto should not be construed as implying in any way
2 that Parker product is manufactured or supplied by GPM or that GPM is in any way associated with Parker.”
Manufactured in South Africa Copyright © 2005 Gear Pump Manufacturing (Pty) Limited All Rights Reserved. No part of this document may be reproduced in any form or manner without permission.
SERIES 1 2 5
CODE GPM unique no. Description Factory No. Part No. Reference*
RETAINERS
MAV-125 s/retainer 125 Seal Retainer Motor 0425-071-500 125-8510-00 391 2584 024
MGA-125 s/retainer 125 Seal Retainer Pump 0425-070-500 125-8500-00 391 3281 004
M MLA-125 retainer 125 Retainer Nut Motor 0425-072-500 125-8210-00 391 2581 001
MW-125 retainer 125 Retainer Nut Pump 0425-037-500 125-8200-00 391 2581 009
RING SEALS
OAH-125 shaft bush 125 Drive Shaft Bush 0425-046-200 125-8030-00 391 0481 002
O OAR-125 shaft bush 125 Conn Shaft Bush 0425-047-200 125-8040-00 391 0481 003
0-RINGS
PL-125-109 o/ring 125 Shaft 0425-105-200 125-8745-01 391 2881 203
PR-125-8 o/ring 125 Shaft Motor 0425-106-200 125-8745-03 391 2881 261
P PL-125-26 o/ring 125 Retainer 0425-104-200 125-8745-02 391 2881 120
PBA-131-2 ps 125 Pocket Seal 0430-107-200 150-8743-90 391 2882 051
SPACERS
QDB-125 s/spacer 125 Shaft Spacer 0425-057-500 125-8420-00 391 2585 001
QGB-125 brg spacer 125 Bearing Spacer 0425-075-500 125-8430-00 391 3381 007
QSA-125 s/spacer 125 Seal Spacer 0425-038-500 125-8410-00 391 2584 016
QTA-125-1 spacer 125 Internal Spacer 0425-060-500 125-8431-00 391 3383 002
Q QTA-125-2 spacer
QTA-125-3 spacer
125 Internal Spacer
125 Internal Spacer
0425-061-500
0425-062-500
125-8432-00
125-8433-00
391 3383 003
391 3383 004
QTA-125-4 spacer 125 Internal Spacer 0425-063-500 125-8434-00 391 3383 005
QTA-125-5 spacer 125 Internal Spacer 0425-064-500 125-8435-00 391 3383 006
QTA-125-6 spacer 125 Internal Spacer 0425-065-500 125-8436-00 391 3383 007
QTA-125-7 spacer 125 Internal Spacer 0425-066-500 125-8437-00 391 3383 008
QTA-125-8 spacer 125 Internal Spacer 0425-067-500 125-8438-00 391 3383 009
QTA-125-9 spacer 125 Internal Spacer 0425-068-500 125-8439-00 391 3383 010
QYA-125-1 shaft spacer 125 Shaft Spacer 0425-056-500 125-8420-00 391 3383 015
KEYS
RX-113 key 290 Key 0451-010-200 XXX-8920-04 391 1781 020
RX-13 key 290 Key 1/4" x 3/8" x 1 1/4" 0425-130-200 XXX-8920-01 391 1781 021
R RX-17 key 290 Key 1/4" x 3/8" x 1 " 0430-122-200 XXX-8920-02 391 1781 025
RX-20 key 290 Key .19 x 1.25 .28 0415-140-200 XXX-8920-04 391 1781 027
RX-38 key 290 Key 5/16" x 15/32" x 1 1/2" 0425-129-200 XXX-8920-03 391 1781 045
RX-54 key 290 Key 5/16" x 5/16" x 1 1/4" 0430-124-200 XXX-8920-07 391 1781 007
SNAP RINGS
S SX-125-13 snap ring 125 Snap Ring Shaft Type 2 0425-111-200 125-8320-00 391 2688 012
GENERAL
WA-125-182 spring 125 Spring 0425-114-200 125-8900-00 391 3581 176
WEB-125 thrust washer 125 Thrust Washer 0425-112-200 125-8244-00 391 3785 005
All product listed herein is product manufactured and/or supplied by Gear Pump Manufacturing (Pty) Limited (“GPM”), a South African manufacturer and supplier of
replacement parts and components.
“Commercial Intertech” is a registered trademark or copyright of the Parker Hannifin Corporation (“Parker”). Any reference to this entity, its trademark, copyright,
product or reference number, is for product comparison and reference purposes only and as such, any referral thereto should not be construed as implying in any way
2 that Parker product is manufactured or supplied by GPM or that GPM is in any way associated with Parker.”
Manufactured in South Africa Copyright © 2005 Gear Pump Manufacturing (Pty) Limited All Rights Reserved. No part of this document may be reproduced in any form or manner without permission.
SERIES 1 3 1
All product listed herein is product manufactured and/or supplied by Gear Pump Manufacturing (Pty) Limited (“GPM”), a South African manufacturer and supplier of
replacement parts and components.
“Commercial Intertech” is a registered trademark or copyright of the Parker Hannifin Corporation (“Parker”). Any reference to this entity, its trademark, copyright,
product or reference number, is for product comparison and reference purposes only and as such, any referral thereto should not be construed as implying in any way
2 that Parker product is manufactured or supplied by GPM or that GPM is in any way associated with Parker.”
Manufactured in South Africa Copyright © 2005 Gear Pump Manufacturing (Pty) Limited All Rights Reserved. No part of this document may be reproduced in any form or manner without permission.
SERIES 1 3 1
CODE GPM unique no. Description Factory No. Part No. Reference*
B BV-131-15 gs
BV-131-17 gs
131 Gear Set -15
131 Gear Set -17
0330-015-100
0330-016-100
131-5315-00
131-5317-00
312 2815 000
312 2817 000
BV-131-20 gs 131 Gear Set -20 0330-017-100 131-5320-00 312 2820 000
BV-131-22 gs 131 Gear Set -22 0330-018-100 131-5322-00 312 2822 000
BV-131-25 gs 131 Gear Set -25 0330-019-100 131-5325-00 312 2825 000
GEAR HOUSINGS
CRA-131-05 hsg 131 Housing -05 0430-005-501 131-2105-00 312 8205 100
CRA-131-07 hsg 131 Housing -07 0430-007-501 131-2107-00 312 8207 100
CRA-131-10 hsg 131 Housing -10 0430-010-501 131-2110-00 312 8210 100
CRA-131-12 hsg 131 Housing -12 0430-012-501 131-2112-00 312 8212 100
C CRA-131-15 hsg
CRA-131-17 hsg
131 Housing -15
131 Housing -17
0430-015-501
0430-017-501
131-2115-00
131-2117-00
312 8215 100
312 8217 100
CRA-131-20 hsg 131 Housing -20 0430-020-501 131-2120-00 312 8220 100
CRA-131-22 hsg 131 Housing -22 0430-022-501 131-2122-00 312 8222 100
CRA-131-25 hsg 131 Housing -25 0430-025-501 131-2125-00 312 8225 100
BEARING CARRIERS
FVA-131 bc 131 Bearing Carrier 0430-031-501 131-3100-00 312 7740 100
F FVA-131-11 bc 131 BC with 1/4" npt drain 0430-029-500 131-3100-10
All product listed herein is product manufactured and/or supplied by Gear Pump Manufacturing (Pty) Limited (“GPM”), a South African manufacturer and supplier of
replacement parts and components.
“Commercial Intertech” is a registered trademark or copyright of the Parker Hannifin Corporation (“Parker”). Any reference to this entity, its trademark, copyright,
product or reference number, is for product comparison and reference purposes only and as such, any referral thereto should not be construed as implying in any way
2 that Parker product is manufactured or supplied by GPM or that GPM is in any way associated with Parker.”
Manufactured in South Africa Copyright © 2005 Gear Pump Manufacturing (Pty) Limited All Rights Reserved. No part of this document may be reproduced in any form or manner without permission.
SERIES 1 3 1
CODE GPM unique no. Description Factory No. Part No. Reference*
THRUST PLATES
CONNECTING SHAFT
IAF-131/131 cs 131 Connecting shaft PB 131/131 0430-055-500 131-7100-00 312 1133 002
I IZA-131 cs 131 Connecting Shaft 0430-038-500 131-7000-00 312 1133 001
CONTINENTAL SHAFTS
JAH-131 14spl cds 131 1 1/4" 14 Spl Shaft 0430-054-500 131-6100-45 312 1135 133
JAI-131 9spl cds 131 5/8" 9 Spl Shaft 0430-061-500 131-6100-20 312 1000 200
JAJ-131 13spl cds 131 7/8" 13 Spl Shaft 0430-051-500 131-6100-32 312 1135 138
JAJ-131 13spl sh cds 131 7/8" 13 Spl Shaft Short 0430-052-500 131-6200-32 SPECIAL
JAK-131 7/8" key cds 131 7/8" Key Shaft 0430-059-500 131-6100-12 312 1500 300
BEARINGS
KX-131-40 shaft brg 131/230 Shaft Bearing 0430-105-200 131-8020-00 391 0381 040
K KY-131 roller brg 131 Roller Bearing 0430-104-200 131-8010-00 391 0381 068
SEALS
LUB-131-242 bs 131/230 Body Seal 0430-108-200 131-8720-00 391 2884 050
LX-131-11 motor seal 131 Shaft Seal Motor C 0430-121-200 131-8713-00 391 2883 126
LX-131-16 pump seal 131 Shaft Seal Pump I 0430-102-200 131-8711-00 391 2883 058
L LX-131-18 pump seal 131 Shaft Seal Pump C 0475-110-200 131-8712-00 391 2883 107
LX-131-9 motor seal 131 Shaft Seal Motor I 0430-101-200 131-8714-00 391 2883 119
LX-131V-16 viton seal 131 Viton seal 0430-098-200 131-8711-10
LX-131V-18 viton seal 131 Viton seal 0430-099-200 131-8712-10
DOWEL PINS
RING SEALS
O OLB-131-1 ring seal 131 Ring Seal 0430-036-200 131-8910-00 391 2585 006
0 - RINGS
PBA-131-2 ps 131/151 Pocket Seal for 2 plates 0430-107-200 XXX-8743-90 391 2882 051
P PL-PB131/131-30 o/ring 131 O-ring PB 131/131 0430-109-200 131-8745-05 391 2881 124
SPACERS
QAE-131 s/spacer 131 Seal Spacer 0430-041-500 131-8410-00 391 3381 040
QAK-PB131/131 spacer 131 Spacer PB 131/131 0430-074-500 131-8440-00 391 2584 063
Q QTB-131 shaft spacer 131 Shaft Spacer 0430-066-500 131-8420-00 312 0100 002
QVB-131-2 brg spacer 131 Bearing Spacer 0430-042-500 131-8430-02 391 3383 069
KEYS
RX-113 key 290 Key 0451-010-200 XXX-8920-04 391 1781 020
RX-13 key 290 Key 1/4" x 3/8" x 1 1/4" 0425-130-200 XXX-8920-01 391 1781 021
RX-16 key 290 Key 1/4" x 1/4" x 1 1/4" 0425-132-200 XXX-8920-05 391 1781 082
R RX-17 key 290 Key 1/4" x 3/8" x 1" 0430-122-200 XXX-8920-02 391 1781 025
RX-18 key 290 Key 1/4" x 1/4" x 1" 0430-123-200 XXX-8920-05 391 1781 085
RX-19 key 290 Key 5/16" x 5/16" x 1 1/2" 0425-133-200 XXX-8920-06 391 1781 083
RX-20 key 290 Key .19 x 1.25 .28 0415-140-200 XXX-8920-04 391 1781 027
RX-38 key 290 Key 5/16" x 15/32" x 1 1/2" 0425-129-200 XXX-8920-03 391 1781 045
RX-54 key 290 Key 5/16" x 5/16" x 1 1/4" 0430-124-200 XXX-8920-07 391 1781 007
All product listed herein is product manufactured and/or supplied by Gear Pump Manufacturing (Pty) Limited (“GPM”), a South African manufacturer and supplier of
replacement parts and components.
“Commercial Intertech” is a registered trademark or copyright of the Parker Hannifin Corporation (“Parker”). Any reference to this entity, its trademark, copyright,
product or reference number, is for product comparison and reference purposes only and as such, any referral thereto should not be construed as implying in any way
2 that Parker product is manufactured or supplied by GPM or that GPM is in any way associated with Parker.”
Manufactured in South Africa Copyright © 2005 Gear Pump Manufacturing (Pty) Limited All Rights Reserved. No part of this document may be reproduced in any form or manner without permission.
SERIES 1 3 1
CODE GPM unique no. Description Factory No. Part No. Reference*
SNAP RINGS
SX-131-100 snap ring 131/230 Snap Ring Shaft 0425-109-200 XXX-8320-00 391 2685 011
S SX-131-206 snap ring 131/230 Snap Ring SEC 0425-110-200 XXX-8310-00 391 2686 063
GENERAL
WM-1391-K check valve 290 Check Valve SEC 0431-001-200 XXX-8820-00 391 3681 001
W WT-131-1391 plug
WX-131-11 plug
290 Plug SEC
290 Plug 1/4" npt
0431-002-200
0475-111-200
XXX-8810-00
XXX-8810-00
391 2286 004
391 2281 010 7
All product listed herein is product manufactured and/or supplied by Gear Pump Manufacturing (Pty) Limited (“GPM”), a South African manufacturer and supplier of
replacement parts and components.
“Commercial Intertech” is a registered trademark or copyright of the Parker Hannifin Corporation (“Parker”). Any reference to this entity, its trademark, copyright,
product or reference number, is for product comparison and reference purposes only and as such, any referral thereto should not be construed as implying in any way
2 that Parker product is manufactured or supplied by GPM or that GPM is in any way associated with Parker.”
Manufactured in South Africa Copyright © 2005 Gear Pump Manufacturing (Pty) Limited All Rights Reserved. No part of this document may be reproduced in any form or manner without permission.
SERIES 1 5 1
All product listed herein is product manufactured and/or supplied by Gear Pump Manufacturing (Pty) Limited (“GPM”), a South African manufacturer and supplier of
replacement parts and components.
“Commercial Intertech” is a registered trademark or copyright of the Parker Hannifin Corporation (“Parker”). Any reference to this entity, its trademark, copyright,
product or reference number, is for product comparison and reference purposes only and as such, any referral thereto should not be construed as implying in any way
2 that Parker product is manufactured or supplied by GPM or that GPM is in any way associated with Parker.”
Manufactured in South Africa Copyright © 2005 Gear Pump Manufacturing (Pty) Limited All Rights Reserved. No part of this document may be reproduced in any form or manner without permission.
SERIES 1 5 1
CODE GPM unique no. Description Factory No. Part No. Reference*
B BMA-151-15 gs 151 Gear Set -15 0350-015-100 151-5315-00 313 2815 000
BMA-151-17 gs 151 Gear Set -17 0350-016-100 151-5317-00 313 2817 000
BMA-151-20 gs 151 Gear Set -20 0350-017-100 151-5320-00 313 2820 000
BMA-151-22 gs 151 Gear Set -22 0350-018-100 151-5322-00 313 2822 000
BMA-151-25 gs 151 Gear Set -25 0350-019-100 151-5325-00 313 2825 000
GEAR HOUSINGS
CMA-151-05 hsg 151 Housing -05 0425-005-501 151-2105-00 313 8205 100
CMA-151-07 hsg 151 Housing -07 0425-007-501 151-2107-00 313 8207 100
CMA-151-10 hsg 151 Housing -10 0425-010-501 151-2110-00 313 8210 100
CMA-151-12 hsg 151 Housing -12 0425-012-501 151-2112-00 313 8212 100
C CMA-151-15 hsg
CMA-151-17 hsg
151 Housing -15
151 Housing -17
0425-015-501
0425-017-501
151-2115-00
151-2117-00
313 8215 100
313 8217 100
CMA-151-20 hsg 151 Housing -20 0425-020-501 151-2120-00 313 8220 100
CMA-151-22 hsg 151 Housing -22 0425-022-501 151-2122-00 313 8222 100
CMA-151-25 hsg 151 Housing -25 0425-025-501 151-2125 00 313 8225 100
All product listed herein is product manufactured and/or supplied by Gear Pump Manufacturing (Pty) Limited (“GPM”), a South African manufacturer and supplier of
replacement parts and components.
“Commercial Intertech” is a registered trademark or copyright of the Parker Hannifin Corporation (“Parker”). Any reference to this entity, its trademark, copyright,
product or reference number, is for product comparison and reference purposes only and as such, any referral thereto should not be construed as implying in any way
2 that Parker product is manufactured or supplied by GPM or that GPM is in any way associated with Parker.”
Manufactured in South Africa Copyright © 2005 Gear Pump Manufacturing (Pty) Limited All Rights Reserved. No part of this document may be reproduced in any form or manner without permission.
SERIES 1 5 1
CODE GPM unique no. Description Factory No. Part No. Reference*
E EZA-151 pec
EZA-151-4 port pec
151 PEC
151 PEC 4 PORT Ported
0450-033-501
0450-034-501
151-4100-00
151-4200-00
313 3120 100
313 3420 100
BEARING CARRIERS
FTA-151 bc 151 Bearing Carrier 0450-031-501 151-3100-00 313 7740 100
F FTA-151-11 bc 151 BC with 1/4" npt drain 0450-030-500 151-3100-10
THRUST PLATES
CONNECTING SHAFTS
CONTINENTAL SHAFTS
JAD-151 13spl cds 151 7/8" 13 Spl Shaft 0450-062-500 151-6100-32 313 1000 300
JAE-151 1"key cds 151 1" Key Shaft 0450-061-500 151-6100-13 313 1500 400
JAF-151 1 1/4"key cds 151 1 1/4" Key Shaft 0450-049-500 151-6100-15 313 1500 500
JAG-151 14spl cds 151 1 1/4" 14 Spl Shaft 0450-050-500 151-6100-45 313 1135 194
BEARINGS
KS-151 roller brg 151/125 Roller Bearing 0425-118-200 151-8010-00 391 0381 059
K KX-151-58 shaft brg 151/250 Shaft Bearing 0450-102-200 151-8020-00 391 0381 077
SEALS
LUB-151-244 bs 125/151 Body Seal 0425-117-200 151-8720-00 391 2884 021
LX-151-17 pump seal 151 Shaft Seal Pump 0430-103-200 151-8711-00 391 2883 103
L LX-151-8 motor seal 151 Shaft Seal Motor I 0450-101-200 151-8713-00 391 2883 115
LX-151V-17 viton seal 151 Viton seal 0450-099-200 151-8711-10
DOWEL PINS
RING SEALS
O ONB-151-1 ring seal 151 Ring Seal 0450-038-200 151-8910-00 391 2585 009
0-RINGS
P PBA-131-2 ps 131/151 Pocket Seal for 2 plates 0430-107-200 XXX-8743-90 391 2882 051
SPACERS
QAC-151 s/spacer 151 Seal Spacer 0450-040-500 151-8410-00 391 3383 087
Q QVB/AC-151 spacer
QVB-151-1 brg spacer
151 Bearing Spacer
151 Bearing Spacer
0450-039-200
0450-039-500
151-8440-00
151-8430-01
391 3383 087
391 3383 087
KEYS
RX-113 key 290 Key 0451-010-200 XXX-8920-04 391 1781 020
RX-13 key 290 Key 1/4" x 3/8" x 1 1/4" 0425-130-200 XXX-8920-01 391 1781 021
RX-16 key 290 Key 1/4" x 1/4" x 1 1/4" 0425-132-200 XXX-8920-05 391 1781 082
RX-17 key 290 Key 1/4" x 3/8" x 1 " 0430-122-200 XXX-8920-02 391 1781 025
R RX-18 key
RX-19 key
290 Key 1/4" x 1/4" x 1"
290 Key 5/16" x 5/16" x 1 1/2"
0430-123-200
0425-133-200
XXX-8920-05
XXX-8920-06
391 1781 085
391 1781 083
RX-20 key 290 Key .19 x 1.25 .28 0415-140-200 XXX-8920-04 391 1781 027
RX-38 key 290 Key 5/16" x 15/32" x 1 1/2" 0425-129-200 XXX-8920-03 391 1781 045
RX-54 key 290 Key 5/16" x 5/16" x 1 1/4" 0430-124-200 XXX-8920-07 391 1781 007
SNAP RINGS
SX-151-125 snap ring 151 Snap Ring Shaft 0450-104-200 151-8320-00 391 2685 040
S SX-151-283 snap ring 151 Snap Ring SEC 0450-103-200 151-8310-00 391 2686 065
All product listed herein is product manufactured and/or supplied by Gear Pump Manufacturing (Pty) Limited (“GPM”), a South African manufacturer and supplier of
replacement parts and components.
“Commercial Intertech” is a registered trademark or copyright of the Parker Hannifin Corporation (“Parker”). Any reference to this entity, its trademark, copyright,
product or reference number, is for product comparison and reference purposes only and as such, any referral thereto should not be construed as implying in any way
2 that Parker product is manufactured or supplied by GPM or that GPM is in any way associated with Parker.”
Manufactured in South Africa Copyright © 2005 Gear Pump Manufacturing (Pty) Limited All Rights Reserved. No part of this document may be reproduced in any form or manner without permission.
SERIES 1 5 1
CODE GPM unique no. Description Factory No. Part No. Reference*
GENERAL
WM-1391-K check valve 290 Check Valve SEC 0431-001-200 XXX-8820-00 391 3681 001
W WT-131-1391 plug
WX-131-11 plug
290 Plug SEC
290 Plug 1/4" npt
0431-002-200
0475-111-200
XXX-8810-00
XXX-8810-00
391 2286 004
391 2281 010
All product listed herein is product manufactured and/or supplied by Gear Pump Manufacturing (Pty) Limited (“GPM”), a South African manufacturer and supplier of
replacement parts and components.
“Commercial Intertech” is a registered trademark or copyright of the Parker Hannifin Corporation (“Parker”). Any reference to this entity, its trademark, copyright,
product or reference number, is for product comparison and reference purposes only and as such, any referral thereto should not be construed as implying in any way
2 that Parker product is manufactured or supplied by GPM or that GPM is in any way associated with Parker.”
Manufactured in South Africa Copyright © 2005 Gear Pump Manufacturing (Pty) Limited All Rights Reserved. No part of this document may be reproduced in any form or manner without permission.
SERIES 1 7 6
All product listed herein is product manufactured and/or supplied by Gear Pump Manufacturing (Pty) Limited (“GPM”), a South African manufacturer and supplier of
replacement parts and components.
“Commercial Intertech” is a registered trademark or copyright of the Parker Hannifin Corporation (“Parker”). Any reference to this entity, its trademark, copyright,
product or reference number, is for product comparison and reference purposes only and as such, any referral thereto should not be construed as implying in any way
2 that Parker product is manufactured or supplied by GPM or that GPM is in any way associated with Parker.”
Manufactured in South Africa Copyright © 2005 Gear Pump Manufacturing (Pty) Limited All Rights Reserved. No part of this document may be reproduced in any form or manner without permission.
SERIES 1 7 6
CODE GPM unique no. Description Factory No. Part No. Reference*
A AAL-176-30 gs
ANE-176-10 gs
176 1 1/4" Key Gear Set -30
176 1 1/4" 14 Spl Gear Set -10
0475-098-100
0475-060-100
176-5130-15
176-5110-45
316 2930 750
316 2910 250
ANE-176-12 gs 176 1 1/4" 14 Spl Gear Set -12 0475-061-100 176-5112-45 316 2912 250
ANE-176-15 gs 176 1 1/4" 14 Spl Gear Set -15 0475-062-100 176-5115-45 316 2915 250
ANE-176-17 gs 176 1 1/4" 14 Spl Gear Set -17 0475-063-100 176-5117-45 316 2917 250
ANE-176-20 gs 176 1 1/4" 14 Spl Gear Set -20 0475-064-100 176-5120-45 316 2920 250
ANE-176-22 gs 176 1 1/4" 14 Spl Gear Set -22 0475-065-100 176-5122-45 316 2922 250
ANE-176-25 gs 176 1 1/4" 14 Spl Gear Set -25 0475-066-100 176-5125-45 316 2925 250
ANE-176-27 gs 176 1 1/4" 14 Spl Gear Set -27 0475-067-100 176-5127-45 316 2927 250
ANE-176-30 gs 176 1 1/4" 14 Spl Gear Set -30 0475-068-100 176-5130-45 316 2930 250
GEAR HOUSINGS
CSA-176-07 hsg 176 Housing -07 0475-009-501 176-2107-00 316 8207 100
CSA-176-10 hsg 176 Housing -10 0475-010-501 176-2110-00 316 8210 100
CSA-176-12 hsg 176 Housing -12 0475-012-501 176-2112-00 316 8212 100
CSA-176-15 hsg 176 Housing -15 0475-015-501 176-2115-00 316 8215 100
C CSA-176-17 hsg
CSA-176-20 hsg
176 Housing -17
176 Housing -20
0475-017-501
0475-020-501
176-2117-00
176-2120-00
316 8217 100
316 8220 100
CSA-176-22 hsg 176 Housing -22 0475-022-501 176-2122-00 316 8222 100
CSA-176-25 hsg 176 Housing -25 0475-025-501 176-2125-00 316 8225 100
CSA-176-27 hsg 176 Housing -27 0475-027-501 176-2127-00 316 8227 100
CSA-176-30 hsg 176 Housing -30 0475-030-501 176-2130-00 316 8230 100
BEARING CARRIERS
FZA-176 bc 176 Bearing Carrier 0475-034-501 176-3100-00 316 7740 100
F FZA-176-11 bc 176 BC with 1/4" npt drain 0475-036-500 176-3100-10
THRUST PLATES
GBA-176 dv bi tp 176 Thrust Plate 0475-074-500 176-8110-00 391 2185 040
G GBA-176 dv uni tp
GBA-176 tp
176 Thrust Plate
176 Thrust Plate
0475-075-500
0475-076-500
176-8150-00
176-8120-00
391 2185 072
391 2185 020
All product listed herein is product manufactured and/or supplied by Gear Pump Manufacturing (Pty) Limited (“GPM”), a South African manufacturer and supplier of
replacement parts and components.
“Commercial Intertech” is a registered trademark or copyright of the Parker Hannifin Corporation (“Parker”). Any reference to this entity, its trademark, copyright,
product or reference number, is for product comparison and reference purposes only and as such, any referral thereto should not be construed as implying in any way
2 that Parker product is manufactured or supplied by GPM or that GPM is in any way associated with Parker.”
Manufactured in South Africa Copyright © 2005 Gear Pump Manufacturing (Pty) Limited All Rights Reserved. No part of this document may be reproduced in any form or manner without permission.
SERIES 1 7 6
CODE GPM unique no. Description Factory No. Part No. Reference*
CONNECTING SHAFT
IAB-176 cs 176 Connecting Shaft 0475-071-500 176-7000-00 316 1133 001
I IAH-176/131 cs 176 Connecting Shaft PB176/131 0475-087-500 176-7520-00 316 1133 003
CONTINENTAL SHAFTS
JAL-176 1 1/4"key cds 176 1 1/4" Key Shaft 0475-080-500 176-6100-15 316 1135 147
JAS-176 14spl cds 176 1 1/4" 14 Spl Shaft 0475-081-500 176-6100-45 316 1135 148
J JAS-176-SHD 13spl cds 176 1 3/4" 13 Spl Shaft 0475-082-500 176-6400-36 316 1000 701
JUC-176 45mm key cds 176 45mm Key Shaft 0475-086-500 176-6400-17 SPECIAL
BEARINGS
KR-176 roller brg 176 Roller Bearing 0475-108-200 176-8010-00 391 0381 060
K KX-176-59 shaft brg 176/265 Shaft Bearing 0475-104-200 176-8020-00 391 0381 078
SEALS
LUB-176-252 bs 176 Body Seal 0475-107-200 176-8720-00 391 2884 024
RETAINERS
M MRA-176 s/retainer 176 Seal Retainer 0475-072-500 176-8500-00 391 2584 082
DOWEL PINS
RING SEALS
O OWB-176-1 ring seal 176 Ring Seal 0475-035-200 176-8910-00 391 2585 011
0-RINGS
PBA-176 DV plate seal 176 Thrust Plate Seal 0475-073-200 176-8734-00 391 2885 040
PBA-176-3 ps 176 Pocket Seal for 2 plates 0475-106-200 176-8743-80 391 2882 084
P PL-176-164 o/ring 176 O-ring Retainer 0475-103-200 176-8745-02 391 2881 457
PL-PB176/131-159 o/ring 176 O-ring PB 176/131 0475-109-200 176-8745-05 391 2881 253
SPACERS
QAF-176 s/spacer 176 Shaft Spacer 0475-084-500 176-8420-00 391 3381 039
Q QAL-PB176/131 spacer
QVB-176 brg spacer
176 Spacer PB 176/131
176 Bearing Spacer
0475-109-500
0475-077-500
176-8440-00
176-8430-00
391 2585 013
391 3383 018
KEYS
RX-113 key 290 Key 0451-010-200 XXX-8920-04 391 1781 020
RX-13 key 290 Key 1/4" x 3/8" x 1 1/4" 0425-130-200 XXX-8920-01 391 1781 021
RX-16 key 290 Key 1/4" x 1/4" x 1 1/4" 0425-132-200 XXX-8920-05 391 1781 082
RX-17 key 290 Key 1/4" x 3/8" x 1 " 0430-122-200 XXX-8920-02 391 1781 025
R RX-18 key
RX-19 key
290 Key 1/4" x 1/4" x 1"
290 Key 5/16" x 5/16" x 1 1/2"
0430-123-200
0425-133-200
XXX-8920-05
XXX-8920-06
391 1781 085
391 1781 083
RX-20 key 290 Key .19 x 1.25 .28 0415-140-200 XXX-8920-04 391 1781 027
RX-38 key 290 Key 5/16" x 15/32" x 1 1/2" 0425-129-200 XXX-8920-03 391 1781 045
RX-54 key 290 Key 5/16" x 5/16" x 1 1/4" 0430-124-200 XXX-8920-07 391 1781 007
SNAP RINGS
SX-176-137 snap ring 176 Snap Ring Shaft 0475-115-200 176-8320-00 391 2685 029
S SX-176-315 snap ring 176 Snap Ring SEC 0475-105-200 176-8310-00 391 2686 025
All product listed herein is product manufactured and/or supplied by Gear Pump Manufacturing (Pty) Limited (“GPM”), a South African manufacturer and supplier of
replacement parts and components.
“Commercial Intertech” is a registered trademark or copyright of the Parker Hannifin Corporation (“Parker”). Any reference to this entity, its trademark, copyright,
product or reference number, is for product comparison and reference purposes only and as such, any referral thereto should not be construed as implying in any way
2 that Parker product is manufactured or supplied by GPM or that GPM is in any way associated with Parker.”
Manufactured in South Africa Copyright © 2005 Gear Pump Manufacturing (Pty) Limited All Rights Reserved. No part of this document may be reproduced in any form or manner without permission.
SERIES 1 7 6
CODE GPM unique no. Description Factory No. Part No. Reference*
V VBOLT 5/8" X 4.75" 290 Bolt 5/8" UNC 0425-161-200 XXX-8212-B3 391 1401 341
VBOLT 5/8" X 5.00" 290 Bolt 5/8" UNC 0425-154-200 XXX-8212-B0 391 1401 295
VBOLT 5/8" X 5.25" 290 Bolt 5/8" UNC 0425-159-200 XXX-8212-C1 391 1401
VBOLT 5/8" X 5.50" 290 Bolt 5/8" UNC 0425-155-200 XXX-8212-B2 391 1401 362
VBOLT 5/8" X 5.75" 290 Bolt 5/8" UNC 0425-162-200 XXX-8212-C3 391 1401 334
VBOLT 5/8" X 6.00" 290 Bolt 5/8" UNC 0425-156-200 XXX-8212-D0 391 1401 405
VBOLT 5/8" X 6.25" 290 Bolt 5/8" UNC 0425-166-200 XXX-8212-D1 391 1401
VBOLT 5/8" X 6.50" 290 Bolt 5/8" UNC 0425-157-200 XXX-8212-D2 391 1401 363
VBOLT 5/8" X 6.75" 290 Bolt 5/8" UNC 0425-163-200 XXX-8212-D3 391 1401 528
VBOLT 5/8" X 7.00" 290 Bolt 5/8" UNC 0425-158-200 XXX-8212-E0 391 1401 409
VBOLT 5/8" X 8.00" 290 Bolt 5/8" UNC 0425-164-200 XXX-8212-F0 391 1401 473
VBOLT 5/8" X 9.00" 290 Bolt 5/8" UNC 0425-165-200 XXX-8212-J0 391 1401 374
VNUT 5/8" 290-5/8" Nut 0455-176-200 XXX-8230-00 391 1451 076
VROD 5/8" 290 Tie Rod 5/8" unc 0425-140-200 XXX-8222-00 SPECIAL
VSTUD 5/8"" X 06"-11" 290 Stud 5/8" unc 06"-11" 0484-060-110 XXX-8222-01 SPECIAL
VSTUD 5/8" X 11"-16" 290 Stud 5/8" unc 11"-16" 0484-110-160 XXX-8222-02 SPECIAL
VSTUD 5/8" X 16"-21" 290 Stud 5/8" unc 16"-21" 0484-160-210 XXX-8222-03 SPECIAL
VSTUD 5/8" X 21"-26" 290 Stud 5/8" unc 21"-26" 0484-210-260 XXX-8222-04 SPECIAL
VWASHER 5/8" 290-131/151/230/250 5/8" washer 0450-177-500 XXX-8242-00 391 3784 028
GENERAL
WM-1391-K check valve 290 Check Valve SEC 0431-001-200 XXX-8820-00 391 3681 001
W WT-131-1391 plug
WX-131-11 plug
290 Plug SEC
290 Plug 1/4" npt
0431-002-200
0475-111-200
XXX-8810-00
XXX-8810-00
391 2286 004
391 2281 010
All product listed herein is product manufactured and/or supplied by Gear Pump Manufacturing (Pty) Limited (“GPM”), a South African manufacturer and supplier of
replacement parts and components.
“Commercial Intertech” is a registered trademark or copyright of the Parker Hannifin Corporation (“Parker”). Any reference to this entity, its trademark, copyright,
product or reference number, is for product comparison and reference purposes only and as such, any referral thereto should not be construed as implying in any way
2 that Parker product is manufactured or supplied by GPM or that GPM is in any way associated with Parker.”
Manufactured in South Africa Copyright © 2005 Gear Pump Manufacturing (Pty) Limited All Rights Reserved. No part of this document may be reproduced in any form or manner without permission.
SERIES 2 1 5
All product listed herein is product manufactured and/or supplied by Gear Pump Manufacturing (Pty) Limited (“GPM”), a South African manufacturer and supplier of
replacement parts and components.
“Commercial Intertech” is a registered trademark or copyright of the Parker Hannifin Corporation (“Parker”). Any reference to this entity, its trademark, copyright,
product or reference number, is for product comparison and reference purposes only and as such, any referral thereto should not be construed as implying in any way
2 that Parker product is manufactured or supplied by GPM or that GPM is in any way associated with Parker.”
Manufactured in South Africa Copyright © 2005 Gear Pump Manufacturing (Pty) Limited All Rights Reserved. No part of this document may be reproduced in any form or manner without permission.
SERIES 2 1 5
CODE GPM unique no. Description Factory No. Part No. Reference*
A ADK-215-15 gs
ADK-215-17 gs
215 7/8" Key Gear Set -15
215 7/8" Key Gear Set -17
0315-075-100
0315-076-100
215-5215-12
215-5217-12
326 2915 930
326 2917 930
ADK-215-20 gs 215 7/8" Key Gear Set -20 0315-077-100 215-5220-12 326 2920 930
ATK-215-03 gs 215 7/8" Taper Gear Set -03 0315-120-100 215-5203-92 326 2903 604
ATK-215-05 gs 215 7/8" Taper Gear Set -05 0315-121-100 215-5205-92 326 2905 604
ATK-215-06 gs 215 7/8" Taper Gear Set -06 0315-122-100 215-5206-92 326 2906 604
ATK-215-07 gs 215 7/8" Taper Gear Set -07 0315-123-100 215-5207-92 326 2907 604
ATK-215-08 gs 215 7/8" Taper Gear Set -08 0315-124-100 215-5208-92 326 2908 604
ATK-215-10 gs 215 7/8" Taper Gear Set -10 0315-125-100 215-5210-92 326 2910 604
ATK-215-11 gs 215 7/8" Taper Gear Set -11 0315-126-100 215-5211-92 326 2911 604
ATK-215-12 gs 215 7/8" Taper Gear Set -12 0315-127-100 215-5212-92 326 2912 604
ATK-215-13 gs 215 7/8" Taper Gear Set -13 0315-128-100 215-5213-92 326 2913 604
ATK-215-15 gs 215 7/8" Taper Gear Set -15 0315-129-100 215-5215-92 326 2915 604
ATK-215-16 gs 215 7/8" Taper Gear Set -16 0315-130-100 215-5216-92 326 2916 604
ATK-215-17 gs 215 7/8" Taper Gear Set -17 0315-131-100 215-5217-92 326 2917 604
ATK-215-18 gs 215 7/8" Taper Gear Set -18 0315-132-100 215-5218-92 326 2918 604
ATK-215-20 gs 215 7/8" Taper Gear Set -20 0315-133-100 215-5220-92 326 2920 604
GEAR HOUSINGS
CRK-215-03 hsg 215 Housing -03 0415-003-500 215-2103-00 326 8103 100
CRK-215-05 hsg 215 Housing -05 0415-005-500 215-2105-00 326 8105 100
CRK-215-06 hsg 215 Housing -06 0415-006-500 215-2106-00 326 8106 100
CRK-215-07 hsg 215 Housing -07 0415-007-500 215-2107-00 326 8107 100
CRK-215-08 hsg 215 Housing -08 0415-008-500 215-2108-00 326 8108 100
CRK-215-10 hsg 215 Housing -10 0415-010-500 215-2110-00 326 8110 100
CRK-215-11 hsg 215 Housing -11 0415-011-500 215-2111-00 326 8111 100
CRK-215-12 hsg 215 Housing -12 0415-012-500 215-2112-00 326 8112 100
CRK-215-13 hsg 215 Housing -13 0415-013-500 215-2113-00 326 8113 100
CRK-215-15 hsg 215 Housing -15 0415-015-500 215-2115-00 326 8115 100
CRK-215-16 hsg 215 Housing -16 0415-016-500 215-2116-00 326 8116 100
CRK-215-17 hsg 215 Housing -17 0415-017-500 215-2117-00 326 8117 100
CRK-215-18 hsg 215 Housing -18 0415-018-500 215-2118-00 326 8118 100
CRK-215-20 hsg 215 Housing -20 0415-020-500 215-2120-00 326 8120 100
CLK-215-03 motor hsg 215 M Housing -03 0415-060-500 215-2203-00 326 8203 100
CLK-215-05 motor hsg 215 M Housing -05 0415-061-500 215-2205-00 326 8205 100
All product listed herein is product manufactured and/or supplied by Gear Pump Manufacturing (Pty) Limited (“GPM”), a South African manufacturer and supplier of
replacement parts and components.
“Commercial Intertech” is a registered trademark or copyright of the Parker Hannifin Corporation (“Parker”). Any reference to this entity, its trademark, copyright,
product or reference number, is for product comparison and reference purposes only and as such, any referral thereto should not be construed as implying in any way
2 that Parker product is manufactured or supplied by GPM or that GPM is in any way associated with Parker.”
Manufactured in South Africa Copyright © 2005 Gear Pump Manufacturing (Pty) Limited All Rights Reserved. No part of this document may be reproduced in any form or manner without permission.
SERIES 2 1 5
CODE GPM unique no. Description Factory No. Part No. Reference*
C CLK-215-17 motor hsg 215 M Housing -17 0415-071-500 215-2217-00 326 8217 100
CLK-215-18 motor hsg 215 M Housing -18 0415-072-500 215-2218-00 326 8218 100
CLK-215-20 motor hsg 215 M Housing -20 0415-073-500 215-2220-00 326 8220 100
BEARING CARRIERS
FYK-215-1 bc 215 Bearing Carrier 1 in 1 out 0415-080-500 215-3100-00 326 7600 100
F FYK-215-2 bc 215 Bearing Carrier 1 in 2 out 0415-030-500 215-3200-00 326 7800 100
THRUST PLATES
GM-215 motor tp 215 Thrust Plate Motor 0415-037-500 215-8130-00 391 2185 070
G GCI-215 pump tp 215 Thrust Plate Pump 0415-036-500 215-8140-00 391 2185 063
H HM-215-MSS tps 215 Thrust Plate M Seal S 0415-012-200 215-8732-40 391 2881 997
HCI-215-CS tps 215 Thrust Plate Seal 0415-010-200 215-8731-20 391 2883 168
HCI-215-CSBU tps 215 Thrust Plate Seal B/Up 0415-011-200 215-8731-30 391 2883 169
CONNECTING SHAFT
CONTINENTAL SHAFTS
J JGD-215 1" key cds 215 1" Key Shaft 0415-050-500 215-6100-13
BEARINGS / BUSHES
KX-215-215 shaft brg 215 Bearing 0415-107-200 215-8020-00 391 0381 105
K KBUSH-215 215 Bush 0415-001-200 215-8000-00 391 0482 206
SEALS
LUB-215-239M bs 215 Body Seal motor 0415-109-200 215-8720-00 391 2881 429
LUB-215-239 bs 215 Body Seal pump 0415-108-200 215-8720-00 391 2881 968
L LX-215-M motor seal 215 Shaft Seal Motor 0415-106-200 215-8713-00 391 2883 156
LX-215 pump seal 215 Shaft Seal Pump 0415-105-200 215-8711-00 391 2883 151
DOWEL PINS
SPACERS
Q QAE-215 ms/spacer 215 Seal spacer motor 0415-090-500 215-8410-10 391 3384 913
All product listed herein is product manufactured and/or supplied by Gear Pump Manufacturing (Pty) Limited (“GPM”), a South African manufacturer and supplier of
replacement parts and components.
“Commercial Intertech” is a registered trademark or copyright of the Parker Hannifin Corporation (“Parker”). Any reference to this entity, its trademark, copyright,
product or reference number, is for product comparison and reference purposes only and as such, any referral thereto should not be construed as implying in any way
2 that Parker product is manufactured or supplied by GPM or that GPM is in any way associated with Parker.”
Manufactured in South Africa Copyright © 2005 Gear Pump Manufacturing (Pty) Limited All Rights Reserved. No part of this document may be reproduced in any form or manner without permission.
SERIES 2 1 5
CODE GPM unique no. Description Factory No. Part No. Reference*
KEYS
RX-113 key 290 Key 0451-010-200 XXX-8920-04 391 1781 020
RX-20 key 290 Key .19 x 1.25 .28 0415-140-200 XXX-8920-04 391 1781 027
RX-16 key 290 Key 1/4" x 1/4" x 1 1/4" 0425-132-200 XXX-8920-05 391 1781 082
RX-18 key 290 Key 1/4" x 1/4" x 1" 0430-123-200 XXX-8920-05 391 1781 085
R RX-17 key
RX-13 key
290 Key 1/4" x 3/8" x 1 "
290 Key 1/4" x 3/8" x 1 1/4"
0430-122-200
0425-130-200
XXX-8920-02
XXX-8920-01
391 1781 025
391 1781 021
RX-38 key 290 Key 5/16" x 15/32" x 1 1/2" 0425-129-200 XXX-8920-03 391 1781 045
RX-19 key 290 Key 5/16" x 5/16" x 1 1/2" 0425-133-200 XXX-8920-06 391 1781 083
RX-54 key 290 Key 5/16" x 5/16" x 1 1/4" 0430-124-200 XXX-8920-07 391 1781 007
SNAP RINGS
S SX-215 snap ring 215 Circlip motor 0415-111-200 215-8310-00 391 2686 016
V VBOLT 1/2" X 5.00" 215 Bolt 1/2" UNC 0415-149-200 215-8211-C0 391 1407 007
VBOLT 1/2" X 5.50" 215 Bolt 1/2" UNC 0415-150-200 215-8211-C2 391 1407 009
VBOLT 1/2" X 5.75" 215 Bolt 1/2" UNC 0415-151-200 215-8211-C3 391 1407 010
VBOLT 1/2" X 6.00" 215 Bolt 1/2" UNC 0415-152-200 215-8211-D0 391 1407 011
VBOLT 1/2" X 6.25" 215 Bolt 1/2" UNC 0415-153-200 215-8211-D1 391 1407 012
VBOLT 1/2" X 6.50" 215 Bolt 1/2" UNC 0415-154-200 215-8211-D2 391 1401 013
VBOLT 1/2" X 6.75" 215 Bolt 1/2" UNC 0415-155-200 215-8211-D3 391 1401 014
VBOLT 1/2" X 7.00" 215 Bolt 1/2" UNC 0415-156-200 215-8211-E0 391 1401 015
VBOLT 1/2" X 7.50" 215 Bolt 1/2" UNC 0415-157-200 215-8211-E2 391 1407 016
VSTUD 1/2" X 06"-11" 215 Stud 1/2" 06"-11" 0482-060-110 215-8221-01 SPECIAL
VSTUD 1/2" X 11"-16" 215 Stud 1/2" 11"-16" 0482-110-160 215-8221-02 SPECIAL
VSTUD 1/2" X 16"-21" 215 Stud 1/2" 16"-21" 0482-160-210 215-8221-03 SPECIAL
VSTUD 1/2" X 21"-26" 215 Stud 1/2"" 21""-26""" 0482-210-260 215-8221-04 SPECIAL
GENERAL
WM-1391-K check valve 290 Check Valve SEC 0431-001-200 XXX-8820-00 391 3681 001
W WX-131-11 plug 290 Plug 1/4" npt 0475-111-200 XXX-8810-00 391 2281 010
WT-131-1391 plug 290 Plug SEC 0431-002-200 XXX-8810-00 391 2286 004
All product listed herein is product manufactured and/or supplied by Gear Pump Manufacturing (Pty) Limited (“GPM”), a South African manufacturer and supplier of
replacement parts and components.
“Commercial Intertech” is a registered trademark or copyright of the Parker Hannifin Corporation (“Parker”). Any reference to this entity, its trademark, copyright,
product or reference number, is for product comparison and reference purposes only and as such, any referral thereto should not be construed as implying in any way
2 that Parker product is manufactured or supplied by GPM or that GPM is in any way associated with Parker.”
Manufactured in South Africa Copyright © 2005 Gear Pump Manufacturing (Pty) Limited All Rights Reserved. No part of this document may be reproduced in any form or manner without permission.
SERIES 2 3 0
All product listed herein is product manufactured and/or supplied by Gear Pump Manufacturing (Pty) Limited (“GPM”), a South African manufacturer and supplier of
replacement parts and components.
“Commercial Intertech” is a registered trademark or copyright of the Parker Hannifin Corporation (“Parker”). Any reference to this entity, its trademark, copyright,
product or reference number, is for product comparison and reference purposes only and as such, any referral thereto should not be construed as implying in any way
2 that Parker product is manufactured or supplied by GPM or that GPM is in any way associated with Parker.”
Manufactured in South Africa Copyright © 2005 Gear Pump Manufacturing (Pty) Limited All Rights Reserved. No part of this document may be reproduced in any form or manner without permission.
SERIES 2 3 0
CODE GPM unique no. Description Factory No. Part No. Reference*
B BVC-230-10 gs 230 Gear Set -10 0333-013-100 230-5310-00 324 2810 000
BVC-230-12 gs 230 Gear Set -12 0333-014-100 230-5312-00 324 2812 000
BVC-230-15 gs 230 Gear Set -15 0333-015-100 230-5315-00 324 2815 000
BVC-230-17 gs 230 Gear Set -17 0333-016-100 230-5317-00 324 2817 000
BVC-230-20 gs 230 Gear Set -20 0333-017-100 230-5320-00 324 2820 000
GEAR HOUSINGS
CRC-230-05 hsg 230 Housing -05 0433-005-500 230-2105-00 324 8105 100
CRC-230-07 hsg 230 Housing -07 0433-007-500 230-2107-00 324 8107 100
CRC-230-10 hsg 230 Housing -10 0433-010-500 230-2110-00 324 8110 100
CRC-230-12 hsg 230 Housing -12 0433-012-500 230-2112-00 324 8112 100
C CRC-230-15 hsg
CRC-230-17 hsg
230 Housing -15
230 Housing -17
0433-015-500
0433-017-500
230-2115-00
230-2117-00
324 8115 100
324 8117 100
CRC-230-20 hsg 230 Housing -20 0433-020-500 230-2120-00 324 8120 100
CSC-230-05 motor hsg 230 M Housing -05 0433-070-500 230-2205-00 324 8205 100
CSC-230-07 motor hsg 230 M Housing -07 0433-071-500 230-2207-00 324 8207 100
CSC-230-10 motor hsg 230 M Housing -10 0433-072-500 230-2210-00 324 8210 100
CSC-230-12 motor hsg 230 M Housing -12 0433-073-500 230-2212-00 324 8212 100
CSC-230-15 motor hsg 230 M Housing -15 0433-074-500 230-2215-00 324 8215 100
CSC-230-17 motor hsg 230 M Housing -17 0433-075-500 230-2217-00 324 8217 100
CSC-230-20 motor hsg 230 M Housing -20 0433-076-500 230-2220-00 324 8220 100
All product listed herein is product manufactured and/or supplied by Gear Pump Manufacturing (Pty) Limited (“GPM”), a South African manufacturer and supplier of
replacement parts and components.
“Commercial Intertech” is a registered trademark or copyright of the Parker Hannifin Corporation (“Parker”). Any reference to this entity, its trademark, copyright,
product or reference number, is for product comparison and reference purposes only and as such, any referral thereto should not be construed as implying in any way
2 that Parker product is manufactured or supplied by GPM or that GPM is in any way associated with Parker.”
Manufactured in South Africa Copyright © 2005 Gear Pump Manufacturing (Pty) Limited All Rights Reserved. No part of this document may be reproduced in any form or manner without permission.
SERIES 2 3 0
CODE GPM unique no. Description Factory No. Part No. Reference*
D DNC-230 2b5" sec 230 SEC 2 Bolt 5" C 0433-055-500 230-1241-10 SPECIAL
DEC-230 4b4" sec 230 SEC 4 Bolt 4" B 0433-040-500 230-1331-10 324 5133 201
DPC-230 4b5" sec 230 SEC 4 Bolt 5" C 0433-041-500 230-1341-10 324 5133 202
E EUC-230 ported pec 230 PEC Ported 0433-033-500 230-4200-00 324 3110 100
EXC-230 tandem pec 230 PEC Tandem 0433-031-500 230-4300-00 324 3100 100
BEARING CARRIERS
FWC-230-1 bc 230 Bearing Carrier 1-1 0433-080-500 230-3100-00 324 7600 100
F FWC-230-2 bc 230 Bearing Carrier 1-2 0433-030-500 230-3200-00 324 7800 100
FWC-230-M motor bc 230 Bearing Carrier Motor 0433-082-500 230-3400-00 324 7800 100
THRUST PLATES
GM-230 motor tp 230 Thrust Plate Motor 0433-037-500 230-8130-00 391 2185 065
G GCI-230 pump tp 230 Thrust Plate Pump 0433-036-500 230-8140-00 391 2185 056
H HM-230-MES tps 230 Thrust Plate M Seal E 0433-013-200 230-8732-60 391 2881 930
HM-230-MSS tps 230 Thrust Plate M Seal S 0433-012-200 230-8732-40 391 2881 931
HCI-230-CS tps 230 Thrust Plate Seal 0433-010-200 230-8731-20 391 2883 166
CONNECTING SHAFT
CONTINENTAL SHAFTS
JCH-230 14spl cds 230 1 1/4" 14 Spl Shaft 0433-060-500 230-6100-45 324 1000 500
JCW-230 1 1/4"cds 230 1 1/4" Key Shaft 0433-067-500 230-6100-15 324 1500 501
J JCD-230 1"key cds 230 1" Key Shaft 0433-057-500 230-6100-13 324 1500 400
JCK-230 7/8"key cds 230 7/8" Key Shaft 0433-059-500 230-6100-12 324 1500 300
BEARINGS / BUSHES
KX-131-40 shaft brg 131/230 Shaft Bearing 0430-105-200 131-8020-00 391 0381 040
K KBUSH-230 230 Bush 0433-001-200 230-8000-00 391 0482 306
SEALS
LX-131-11 motor seal 131 Shaft Seal Motor C 0430-121-200 131-8713-00 391 2883 126
LX-131-9 motor seal 131 Shaft Seal Motor I 0430-101-200 131-8714-00 391 2883 119
L LX-131-18 pump seal 131 Shaft Seal Pump C 0475-110-200 131-8712-00 391 2883 107
LX-131-16 pump seal 131 Shaft Seal Pump I 0430-102-200 131-8711-00 391 2883 058
LX-131V-16 viton seal 131 Viton seal 0430-098-200 131-8711-10
LX-131V-18 viton seal 131 Viton seal 0430-099-200 131-8712-10
LUB-131-242 bs 131/230 Body Seal 0430-108-200 131-8720-00 391 2884 050
RETAINERS
M MNA-230-1 s/retainer tt 230 Seal Retainer Telltale 0433-081-500 230-8500-00 391 2584 037
DOWEL PINS
SPACERS
QVB-131-2 brg spacer 131 Bearing Spacer 0430-042-500 131-8430-02 391 3383 069
Q QAE-131 s/spacer
QTB-131 shaft spacer
131 Seal Spacer
131 Shaft Spacer
0430-041-500
0430-066-500
131-8410-00
131-8420-00
391 3381 040
312 0100 002
All product listed herein is product manufactured and/or supplied by Gear Pump Manufacturing (Pty) Limited (“GPM”), a South African manufacturer and supplier of
replacement parts and components.
“Commercial Intertech” is a registered trademark or copyright of the Parker Hannifin Corporation (“Parker”). Any reference to this entity, its trademark, copyright,
product or reference number, is for product comparison and reference purposes only and as such, any referral thereto should not be construed as implying in any way
2 that Parker product is manufactured or supplied by GPM or that GPM is in any way associated with Parker.”
Manufactured in South Africa Copyright © 2005 Gear Pump Manufacturing (Pty) Limited All Rights Reserved. No part of this document may be reproduced in any form or manner without permission.
SERIES 2 3 0
CODE GPM unique no. Description Factory No. Part No. Reference*
KEYS
RX-113 key 290 Key 0451-010-200 XXX-8920-04 391 1781 020
RX-20 key 290 Key .19 x 1.25 .28 0415-140-200 XXX-8920-04 391 1781 027
RX-16 key 290 Key 1/4" x 1/4" x 1 1/4" 0425-132-200 XXX-8920-05 391 1781 082
RX-18 key 290 Key 1/4" x 1/4" x 1" 0430-123-200 XXX-8920-05 391 1781 085
R RX-17 key
RX-13 key
290 Key 1/4" x 3/8" x 1 "
290 Key 1/4" x 3/8" x 1 1/4"
0430-122-200
0425-130-200
XXX-8920-02
XXX-8920-01
391 1781 025
391 1781 021
RX-38 key 290 Key 5/16" x 15/32" x 1 1/2" 0425-129-200 XXX-8920-03 391 1781 045
RX-19 key 290 Key 5/16" x 5/16" x 1 1/2" 0425-133-200 XXX-8920-06 391 1781 083
RX-54 key 290 Key 5/16" x 5/16" x 1 1/4" 0430-124-200 XXX-8920-07 391 1781 007
SNAP RINGS
SX-131-206 snap ring 131/230 Snap Ring SEC 0425-110-200 XXX-8310-00 391 2686 063
S SX-131-100 snap ring 131/230 Snap Ring Shaft 0425-109-200 XXX-8320-00 391 2685 011
GENERAL
WM-1391-K check valve 290 Check Valve SEC 0431-001-200 XXX-8820-00 391 3681 001
W WT-131-1391 plug 290 Plug SEC 0431-002-200 XXX-8810-00 391 2286 004
All product listed herein is product manufactured and/or supplied by Gear Pump Manufacturing (Pty) Limited (“GPM”), a South African manufacturer and supplier of
replacement parts and components.
“Commercial Intertech” is a registered trademark or copyright of the Parker Hannifin Corporation (“Parker”). Any reference to this entity, its trademark, copyright,
product or reference number, is for product comparison and reference purposes only and as such, any referral thereto should not be construed as implying in any way
2 that Parker product is manufactured or supplied by GPM or that GPM is in any way associated with Parker.”
Manufactured in South Africa Copyright © 2005 Gear Pump Manufacturing (Pty) Limited All Rights Reserved. No part of this document may be reproduced in any form or manner without permission.
SERIES 2 5 0
All product listed herein is product manufactured and/or supplied by Gear Pump Manufacturing (Pty) Limited (“GPM”), a South African manufacturer and supplier of
replacement parts and components.
“Commercial Intertech” is a registered trademark or copyright of the Parker Hannifin Corporation (“Parker”). Any reference to this entity, its trademark, copyright,
product or reference number, is for product comparison and reference purposes only and as such, any referral thereto should not be construed as implying in any way
2 that Parker product is manufactured or supplied by GPM or that GPM is in any way associated with Parker.”
Manufactured in South Africa Copyright © 2005 Gear Pump Manufacturing (Pty) Limited All Rights Reserved. No part of this document may be reproduced in any form or manner without permission.
SERIES 2 5 0
CODE GPM unique no. Description Factory No. Part No. Reference*
B BMF-250-15 gs
BMF-250-17 gs
250 Gear Set -15
250 Gear Set -17
0335-015-100
0335-016-100
250-5315-00
250-5317-00
323 2815 000
323 2817 000
BMF-250-20 gs 250 Gear Set -20 0335-017-100 250-5320-00 323 2820 000
BMF-250-22 gs 250 Gear Set -22 0335-018-100 250-5322-00 323 2822 000
BMF-250-25 gs 250 Gear Set -25 0335-019-100 250-5325-00 323 2825 000
GEAR HOUSINGS
CMH-250-05 hsg 250 Housing -05 0435-005-500 250-2105-00 323 8105 100
CMH-250-07 hsg 250 Housing -07 0435-007-500 250-2107-00 323 8107 100
CMH-250-10 hsg 250 Housing -10 0435-010-500 250-2110-00 323 8110 100
CMH-250-12 hsg 250 Housing -12 0435-012-500 250-2112-00 323 8112 100
C CMH-250-15 hsg 250 Housing -15 0435-015-500 250-2115-00 323 8115 100
CMH-250-17 hsg 250 Housing -17 0435-017-500 250-2117-00 323 8117 100
CMH-250-20 hsg 250 Housing -20 0435-020-500 250-2120-00 323 8120 100
CMH-250-22 hsg 250 Housing -22 0435-022-500 250-2122-00 323 8122 100
CMH-250-25 hsg 250 Housing -25 0435-025-500 250-2125-00 323 8125 100
CLF-250-05 motor hsg 250 M Housing -05 0435-070-500 250-2205-00 323 8205 100
CLF-250-07 motor hsg 250 M Housing -07 0435-071-500 250-2207-00 323 8207 100
CLF-250-10 motor hsg 250 M Housing -10 0435-072-500 250-2210-00 323 8210 100
CLF-250-12 motor hsg 250 M Housing -12 0435-073-500 250-2212-00 323 8212 100
CLF-250-15 motor hsg 250 M Housing -15 0435-074-500 250-2215-00 323 8215 100
All product listed herein is product manufactured and/or supplied by Gear Pump Manufacturing (Pty) Limited (“GPM”), a South African manufacturer and supplier of
replacement parts and components.
“Commercial Intertech” is a registered trademark or copyright of the Parker Hannifin Corporation (“Parker”). Any reference to this entity, its trademark, copyright,
product or reference number, is for product comparison and reference purposes only and as such, any referral thereto should not be construed as implying in any way
2 that Parker product is manufactured or supplied by GPM or that GPM is in any way associated with Parker.”
Manufactured in South Africa Copyright © 2005 Gear Pump Manufacturing (Pty) Limited All Rights Reserved. No part of this document may be reproduced in any form or manner without permission.
SERIES 2 5 0
CODE GPM unique no. Description Factory No. Part No. Reference*
C CLF-250-22 motor hsg 250 M Housing -22 0435-077-500 250-2222-00 323 8222 100
CLF-250-25 motor hsg 250 M Housing -25 0435-078-500 250-2225-00 323 8225 100
D DDB-250 4" combo sec 250 SEC 2/4 Bolt 4" B 0435-044-500 250-1531-10 323 5153 201
DDB-250 5" combo sec 250 SEC 2/4 Bolt 5" C 0435-045-500 250-1541-10 323 5153 202
DHF-250 4b4" sec 250 SEC 4 Bolt 4" B 0435-040-500 250-1331-10 323 5133 201
DKF-250 4b5" sec 250 SEC 4 Bolt 5" C 0435-041-500 250-1341-10 323 5133 202
BEARING CARRIERS
FTF-250-1 bc 250 Bearing Carrier 1-1 0435-080-500 250-3100-00 323 7600 100
F FTF-250-2 bc 250 Bearing Carrier 1-2 0435-030-500 250-3200-00 323 7800 100
THRUST PLATES
GM-250 motor tp 250 Thrust Plate Motor 0435-037-500 250-8130-00 391 2185 068
G GCI-250 pump tp 250 Thrust Plate Pump 0435-036-500 250-8140-00 391 2185 057
CONNECTING SHAFT
IPB-250/215 cs 250 Connecting shaft PB 250/215 0435-110-500 250-7100-40 323 1133 006
IAAP-250/13spl cs 250 Connecting shaft 250/13spl 0435-151-500 250-7220-00 323 1133 003
I IAAP-250/9spl cs 250 Connecting shaft 250/9spl 0435-150-500 250-7210-00 323 1133 002
IYF-250 cs 250 Connecting Shaft 0435-001-500 250-7000-00 323 1133 001
CONTINENTAL SHAFTS
J JFG-250 15spl cds 250 1" 15 Spl Shaft 0435-050-500 250-6100-53 SPECIAL
BEARINGS / BUSHES
KAAP-250/265 brg 250 Bearing 250/265 0435-160-200 250-8021-00 391 0381 099
K KX-151-58 shaft brg 151/250 Shaft Bearing 0450-102-200 151-8020-00 391 0381 077
KBUSH-250 250 Bush 0435-001-200 250-8000-00 391 0482 308
SEALS
LUB-151-244 bs 125/151 Body Seal 0425-117-200 151-8720-00 391 2884 021
LX-151-17 pump seal 151 Shaft Seal Pump 0430-103-200 151-8711-00 391 2883 103
RETAINERS
M MPA-250 s/retainer tt 250 Seal Retainer Telltale 0435-081-500 250-8500-00 391 2584 050
All product listed herein is product manufactured and/or supplied by Gear Pump Manufacturing (Pty) Limited (“GPM”), a South African manufacturer and supplier of
replacement parts and components.
“Commercial Intertech” is a registered trademark or copyright of the Parker Hannifin Corporation (“Parker”). Any reference to this entity, its trademark, copyright,
product or reference number, is for product comparison and reference purposes only and as such, any referral thereto should not be construed as implying in any way
2 that Parker product is manufactured or supplied by GPM or that GPM is in any way associated with Parker.”
Manufactured in South Africa Copyright © 2005 Gear Pump Manufacturing (Pty) Limited All Rights Reserved. No part of this document may be reproduced in any form or manner without permission.
SERIES 2 5 0
CODE GPM unique no. Description Factory No. Part No. Reference*
DOWEL PINS
SPACERS
QVB/AC-151 spacer 151 Bearing Spacer 0450-039-200 151-8440-00 391 3383 087
KEYS
RX-113 key 290 Key 0451-010-200 XXX-8920-04 391 1781 020
RX-20 key 290 Key .19 x 1.25 .28 0415-140-200 XXX-8920-04 391 1781 027
RX-16 key 290 Key 1/4" x 1/4" x 1 1/4" 0425-132-200 XXX-8920-05 391 1781 082
RX-18 key 290 Key 1/4" x 1/4" x 1" 0430-123-200 XXX-8920-05 391 1781 085
R RX-17 key
RX-13 key
290 Key 1/4" x 3/8" x 1 "
290 Key 1/4" x 3/8" x 1 1/4"
0430-122-200
0425-130-200
XXX-8920-02
XXX-8920-01
391 1781 025
391 1781 021
RX-38 key 290 Key 5/16" x 15/32" x 1 1/2" 0425-129-200 XXX-8920-03 391 1781 045
RX-19 key 290 Key 5/16" x 5/16" x 1 1/2" 0425-133-200 XXX-8920-06 391 1781 083
RX-54 key 290 Key 5/16" x 5/16" x 1 1/4" 0430-124-200 XXX-8920-07 391 1781 007
SNAP RINGS
SAAP250/265 snap ring 250 Snap Ring 250/265 0435-161-200 250-8340-00 391 2686 019
S SX-151-283 snap ring 151 Snap Ring SEC 0450-103-200 151-8310-00 391 2686 065
SX-151-125 snap ring 151 Snap Ring Shaft 0450-104-200 151-8320-00 391 2685 040
GENERAL
WM-1391-K check valve 290 Check Valve SEC 0431-001-200 XXX-8820-00 391 3681 001
W WT-131-1391 plug 290 Plug SEC 0431-002-200 XXX-8810-00 391 2286 004
All product listed herein is product manufactured and/or supplied by Gear Pump Manufacturing (Pty) Limited (“GPM”), a South African manufacturer and supplier of
replacement parts and components.
“Commercial Intertech” is a registered trademark or copyright of the Parker Hannifin Corporation (“Parker”). Any reference to this entity, its trademark, copyright,
product or reference number, is for product comparison and reference purposes only and as such, any referral thereto should not be construed as implying in any way
2 that Parker product is manufactured or supplied by GPM or that GPM is in any way associated with Parker.”
Manufactured in South Africa Copyright © 2005 Gear Pump Manufacturing (Pty) Limited All Rights Reserved. No part of this document may be reproduced in any form or manner without permission.
SERIES 2 6 5
All product listed herein is product manufactured and/or supplied by Gear Pump Manufacturing (Pty) Limited (“GPM”), a South African manufacturer and supplier of
replacement parts and components.
“Commercial Intertech” is a registered trademark or copyright of the Parker Hannifin Corporation (“Parker”). Any reference to this entity, its trademark, copyright,
product or reference number, is for product comparison and reference purposes only and as such, any referral thereto should not be construed as implying in any way
2 that Parker product is manufactured or supplied by GPM or that GPM is in any way associated with Parker.”
Manufactured in South Africa Copyright © 2005 Gear Pump Manufacturing (Pty) Limited All Rights Reserved. No part of this document may be reproduced in any form or manner without permission.
SERIES 2 6 5
CODE GPM unique no. Description Factory No. Part No. Reference*
B BPG-265-17 gs
BPG-265-20 gs
265 Gear Set -17
265 Gear Set -20
0365-015-100
0365-016-100
265-5317-00
265-5320-00
322 2817 000
322 2820 000
BPG-265-22 gs 265 Gear Set -22 0365-017-100 265-5322-00 322 2822 000
BPG-265-25 gs 265 Gear Set -25 0365-018-100 265-5325-00 322 2825 000
GEAR HOUSING
CSG-265-07 hsg 265 Housing -07 0465-007-500 265-2107-00 322 8107 100
CSG-265-10 hsg 265 Housing -10 0465-010-500 265-2110-00 322 8110 100
CSG-265-12 hsg 265 Housing -12 0465-012-500 265-2112-00 322 8112 100
CSG-265-15 hsg 265 Housing -15 0465-015-500 265-2115-00 322 8115 100
CSG-265-17 hsg 265 Housing -17 0465-017-500 265-2117-00 322 8117 100
CSG-265-20 hsg 265 Housing -20 0465-020-500 265-2120-00 322 8120 100
CSG-265-22 hsg 265 Housing -22 0465-022-500 265-2122-00 322 8122 100
C CSG-265-25 hsg
CLG-265-07 motor hsg
265 Housing -25
265 M Housing -07
0465-025-500
0465-071-500
265-2125-00
265-2207-00
322 8125 100
322 8207 100
CLG-265-10 motor hsg 265 M Housing -10 0465-072-500 265-2210-00 322 8210 100
CLG-265-12 motor hsg 265 M Housing -12 0465-073-500 265-2212-00 322 8212 100
CLG-265-15 motor hsg 265 M Housing -15 0465-074-500 265-2215-00 322 8215 100
CLG-265-17 motor hsg 265 M Housing -17 0465-075-500 265-2217-00 322 8217 100
CLG-265-20 motor hsg 265 M Housing -20 0465-076-500 265-2220-00 322 8220 100
CLG-265-22 motor hsg 265 M Housing -22 0465-078-500 265-2222-00 322 8222 100
CLG-265-25 motor hsg 265 M Housing -25 0465-079-500 265-2225-00 322 8225 100
All product listed herein is product manufactured and/or supplied by Gear Pump Manufacturing (Pty) Limited (“GPM”), a South African manufacturer and supplier of
replacement parts and components.
“Commercial Intertech” is a registered trademark or copyright of the Parker Hannifin Corporation (“Parker”). Any reference to this entity, its trademark, copyright,
product or reference number, is for product comparison and reference purposes only and as such, any referral thereto should not be construed as implying in any way
2 that Parker product is manufactured or supplied by GPM or that GPM is in any way associated with Parker.”
Manufactured in South Africa Copyright © 2005 Gear Pump Manufacturing (Pty) Limited All Rights Reserved. No part of this document may be reproduced in any form or manner without permission.
SERIES 2 6 5
CODE GPM unique no. Description Factory No. Part No. Reference*
BEARING CARRIERS
FZG-265-1 bc 265 Bearing Carrier 1-1 0465-031-500 265-3100-00 322 7600 100
FZG-265-M motor bc 265 Bearing Carrier 1-1 motor 0465-038-500 265-3110-00 322 7700 100
F FZG-265-2 bc 265 Bearing Carrier 1-2 0465-030-500 265-3200-00 322 7800 100
FZG-265-3 bc 265 Bearing Carrier 3" inlet 0465-032-500 265-3300-00
TRUST PLATES
GM-265 motor tp 265 Thrust Plate Motor 0465-037-500 265-8130-00 391 2185 060
G GCI-265 pump tp 265 Thrust Plate Pump 0465-036-500 265-8140-00 391 2185 055
CONNECTING SHAFT
IPB-265/230 cs 265 Connecting shaft PB 265/230 0465-110-500 265-7100-80 322 1133 002
IAAP-265/13spl cs 265 Connecting shaft 265/13spl 0465-151-500 265-7220-00 322 1133 004
I IAAP-265/15spl cs 265 Connecting shaft 265/15spl 0465-152-500 265-7240-00 322 1133 009
IAAP-265/9spl cs 265 Connecting shaft 265/9spl 0465-150-500 265-7210-00 322 1133 003
IAG-265 cs 265 Connecting Shaft 0465-045-500 265-7000-00 322 1133 001
CONTINENTAL SHAFTS
BEARINGS / BUSHES
KAAP-250/265 brg 250 Bearing 250/265 0435-160-200 250-8021-00 391 0381 099
SEALS
LX-176V-10 viton seal 176 Viton seal 0475-099-200 176-8711-10
LX-176-1 motor seal 176/265 Shaft Seal Motor I 0475-102-200 176-8713-00 391 2883 094
L LX-176-10 pump seal 176/265 Shaft Seal Pump I 0475-101-200 176-8711-00 391 2883 052
LUB-265-250 bs 265 Body Seal 0465-107-200 265-8720-00 391 2884 052
RETAINERS
M MTT-265 s/retainer tt 265 Seal Retainer Telltale 0465-081-500 265-8500-00 391 2584 097
DOWEL PINS
NDOWEL-265 265 Dowel Hollow 0465-060-500 265-8600-00 391 2082 062
N NDOWEL-265M 265 Dowel Hollow motor 0465-061-500 176-8600-00 391 2082 069
SPACERS
QVB-176 brg spacer 176 Bearing Spacer 0475-077-500 176-8430-00 391 3383 018
Q QAF-176 s/spacer 176 Shaft Spacer 0475-084-500 176-8420-00 391 3381 039
KEYS
RX-20 key 290 Key .19 x 1.25 .28 0415-140-200 XXX-8920-04 391 1781 027
RX-16 key 290 Key 1/4" x 1/4" x 1 1/4" 0425-132-200 XXX-8920-05 391 1781 082
RX-18 key 290 Key 1/4" x 1/4" x 1" 0430-123-200 XXX-8920-05 391 1781 085
RX-17 key 290 Key 1/4" x 3/8" x 1" 0430-122-200 XXX-8920-02 391 1781 025
R RX-13 key
RX-38 key
290 Key 1/4" x 3/8" x 1 1/4"
290 Key 5/16" x 15/32" x 1 1/2"
0425-130-200
0425-129-200
XXX-8920-01
XXX-8920-03
391 1781 021
391 1781 045
RX-19 key 290 Key 5/16" x 5/16" x 1 1/2" 0425-133-200 XXX-8920-06 391 1781 083
RX-54 key 290 Key 5/16" x 5/16" x 1 1/4" 0430-124-200 XXX-8920-07 391 1781 007
SNAP RINGS
SAAP250/265 snap ring 250 Snap Ring 250/265 0435-161-200 250-8340-00 391 2686 019
SX-176-315 snap ring 176 Snap Ring SEC 0475-105-200 176-8310-00 391 2686 025
S SX-176-137 snap ring 176 Snap Ring Shaft 0475-115-200 176-8320-00 391 2685 029
SX-215 snap ring 215 Circlip motor 0415-111-200 215-8310-00 391 2686 016
All product listed herein is product manufactured and/or supplied by Gear Pump Manufacturing (Pty) Limited (“GPM”), a South African manufacturer and supplier of
replacement parts and components.
“Commercial Intertech” is a registered trademark or copyright of the Parker Hannifin Corporation (“Parker”). Any reference to this entity, its trademark, copyright,
product or reference number, is for product comparison and reference purposes only and as such, any referral thereto should not be construed as implying in any way
2 that Parker product is manufactured or supplied by GPM or that GPM is in any way associated with Parker.”
Manufactured in South Africa Copyright © 2005 Gear Pump Manufacturing (Pty) Limited All Rights Reserved. No part of this document may be reproduced in any form or manner without permission.
SERIES 2 6 5
CODE GPM unique no. Description Factory No. Part No. Reference*
V VBOLT 5/8" X 6.25 290 Bolt 5/8" UNC 0425-166-200 XXX-8212-D1 391 1401
VBOLT 5/8" X 6.5 290 Bolt 5/8" UNC 0425-157-200 XXX-8212-D2 391 1401 363
VBOLT 5/8" X 6.75" 290 Bolt 5/8" UNC 0425-163-200 XXX-8212-D3 391 1401 528
VBOLT 5/8" X 7.00" 290 Bolt 5/8" UNC 0425-158-200 XXX-8212-E0 391 1401 409
VBOLT 5/8" X 8.00" 290 Bolt 5/8" UNC 0425-164-200 XXX-8212-F0 391 1401 473
VBOLT 5/8" X 9.00" 290 Bolt 5/8" UNC 0425-165-200 XXX-8212-J0 391 1401 374
VSTUD 5/8" X 06"-11" 290 Stud 5/8" unc 06"-11" 0484-060-110 XXX-8222-01 SPECIAL
VSTUD 5/8" X 11"-16" 290 Stud 5/8" unc 11"-16" 0484-110-160 XXX-8222-02 SPECIAL
VSTUD 5/8" X 16"-21" 290 Stud 5/8" unc 16"-21" 0484-160-210 XXX-8222-03 SPECIAL
VSTUD 5/8" X 21"-26" 290 Stud 5/8" unc 21"-26" 0484-210-260 XXX-8222-04 SPECIAL
VROD 5/8" 290 Tie Rod 5/8" unc 0425-140-200 XXX-8222-00 SPECIAL
VWASHER 5/8" 290-131/151/230/250 5/8" washer 0450-177-500 XXX-8242-00 391 3784 028
VNUT 5/8" 290-5/8" Nut 0455-176-200 XXX-8230-00 391 1451 076
GENERAL
WM-1391-K check valve 290 Check Valve SEC 0431-001-200 XXX-8820-00 391 3681 001
W WT-131-1391 plug 290 Plug SEC 0431-002-200 XXX-8810-00 391 2286 004
All product listed herein is product manufactured and/or supplied by Gear Pump Manufacturing (Pty) Limited (“GPM”), a South African manufacturer and supplier of
replacement parts and components.
“Commercial Intertech” is a registered trademark or copyright of the Parker Hannifin Corporation (“Parker”). Any reference to this entity, its trademark, copyright,
product or reference number, is for product comparison and reference purposes only and as such, any referral thereto should not be construed as implying in any way
2 that Parker product is manufactured or supplied by GPM or that GPM is in any way associated with Parker.”
Manufactured in South Africa Copyright © 2005 Gear Pump Manufacturing (Pty) Limited All Rights Reserved. No part of this document may be reproduced in any form or manner without permission.
Pump Builder
Step 1 Step 2 Step 3 Step 4 Step 5 Step 6 Step 7 Step 8 Step 9 Step 10 Step 11 Step 12 Step 13 Step 14 Step 15 Step 16 Step 11 Step 12
Housing Housing Pec Bearing Housing Housing
Unit Type Series Stages and rotation Shaft Type Shaft Dimension Mounting Type Mounting Dimension Case Drain Case Drain Position Extended Studs code Ports Port End Cover type Ports Bearing Carrier Type Carriers code Ports
GP pump 114 A one-cw 1 solid standard A A spline 9 1 standard with bearing A 2 bolt A 3 1/4” A none A none A none 03 1 blank - no ports A blank - no ports 03
GM motor 115 B one-ccw 2 solid short type 2 B B spline 13 2 standard without bearing B 2 bolt B 4” B 1/4” npt B sec 3 o clock B drive side - top 05 2 1 port - suction - side B common suction only 05
GF flow divider 120 C one-bi 3 solid special C C spline 14 3 short type 2 (no bearing) C 2 bolt C 5” C 1/4” bspp C sec 6 o clock C Idler side - bottom 06 3 1 port - suction - rear C suction only 06
GA add a pump 125 D two-cw 4 continental standard D BB spline 15 4 short type 2 (no bearing) D 4 bolt B 4” D 1/4” odt D sec 9 o clock 07 4 1 port - pressure - side D pressure only 07
GB piggyback 130 E two-ccw 5 continental short E A keyed 5/8" and seal spacer E 4 bolt C 5” E 3/8” odt E sec 12 o clock 08 5 1 port - pressure - rear E 1 suction 1 pressure 08
GZ pump / motor 131 F two-bi 6 continental long F B keyed 7/8" 5 standard with bearing F 4 bolt D 6” F 3/16” telltale F pec drive 10 6 2 ports - suction - side F 1 suction 2 pressures 10
150 G 7 G and seal spacer G G G 11 G 11
three-cw continental special BB keyed 1" 6 bolt round special/other pec idler - pressure - side 131 / piggyback
151 6 standard with bearing spacer 12 12
H three-ccw 8 flow divider H C keyed 1 1/4" H pad mount 7 2 ports - suction - rear H 151 / piggyback
175 7 standard with bearing spacer 13 13
J three-bi 9 pump / motor J BB spline 6 J pad mount clutch - pressure - rear J 176 / piggyback
and seal spacer
176 K four-cw K Spline 8 K flow divider 15 8 2 ports - suction - side K 230 / 215 piggyback 15
8 standard with telltale seal
215 L four-ccw L Spline 10 retainer L 2/4 bolt B 4” 16 - pressure - rear L 250 / 215 piggyback 16
230 M four-bi M Spline 11 9 flowdivider M 2/4 bolt C 5” 17 9 2 ports - suction - rear M 265 / 230 piggyback 17
250 N five-cw N Spline 17 0 special / other N 3 bolt uni 18 - pressure - side N 2 bolt A add a pump 9 spl 18
265 P five-ccw P Spline 13 1 3/4" P 4 bolt din 20 0 4 ports - suction - side & rear P 2 bolt A add a pump 13 spl 20
131 / 131 411 Q five-bi Q Keyed 3/4" Q fan motor 22 - pressure - side & rear Q 2 bolt A add a pump 15 spl 22
151 / 131 412 R six-cw R Keyed 7/8" threaded R pump / motor 25 R 2 bolt B add a pump 9 spl 25
176 / 131 413 S six-ccw S Keyed 1 1/8" S special / other 27 S 2 bolt B add a pump 13 spl 27
176 / 151 414 T six-bi T Keyed 45mm 30 T 2 bolt B add a pump 15 spl 30
230 / 215 421 U Taper 1:4 U special / other
250 / 215 422 V Taper 1:5 V common suction/1 pressure
265 / 230 423 W Taper 7/8" W pump / motor
250 / 2A 511 X Special / other
250 / 2B 512 Y flow divider
265 / 2A 521 Z pump / motor
2 65 / 2B 522
housings blank sfu sfm odt bspp npt mixed port end covers blank sfu sfm odt bspp npt mixed bearing carriers blank sfu sfm odt bspp npt mixed bearing carriers blank sfu sfm odt bspp npt mixed
porting porting porting 1 in 2 out porting
blank blank c blank blank e blank blank f blank blank blank g
1/2" blank 1/2" blank eua ema eoa eba c/suction blank fff 1" 1/2" 1/2" gua gma goa gba ga-
1/2" 1/2" cnb ca- 1/2" 1/2" eob ebb ena ea- 1/2" 3/4" fua fma foa fba fa- 1" 3/4" 1/2" gub gmb gob gbb gb-
3/4" blank cua cma coa cba cnc 5/8" blank eoc 3/4" blank fub fmb fob fbb 1" 5/8" 5/8" goc gc-
3/4" 3/4" cub cmb cob cbb cnd cb- 3/4" blank euw emu eod ebc enb 3/4" 5/8" foc fb- 1" 3/4" 5/8" god gd-
7/8" blank coc cbc 3/4" 1/2" eub emb eoe ebd eb- 3/4" 3/4" fud fmc fod fbc fc- 1" 3/4" 3/4" guc gmc goe gbc ge-
1" blank cuc cmc cod cbd cne 3/4" 5/8" eof ec- 3/4" 7/8" fok 1" 1" 3/4" gof gbd gf-
1" 3/4" cud cmd coe cbe cnf cc- 3/4" 3/4" euc emc eog ebe enc ed- 1" blank fue fmd foe fbd fna 1" 7/8" 7/8" gog gbe gg-
1" 7/8" cof cd- 7/8" blank eoh ebf 1" 5/8" fof fd- 1" 1" 7/8" goh gbf gh-
1" 1" cuf cme cog cbf cng ce- 7/8" 1/2" eud emd eoj ebg ee- 1" 3/4" fuf fme fog fbe fnb fe- 1" 1" 1" gud gmd goi gbh gi-
1 1/4" blank cue cmf coh cbg cnh 7/8" 5/8" eok ef- 1" 7/8" foh fbf fg- 1 1/4" 1/2" 1/2" gue gme goj ghj gj-
To build a part number for a single pump complete Steps 1-14 1 1/4"
1 1/4"
3/4"
1"
cuf cmg coj
cug cmh cok
cbh cnj cf-
cbj cnk cg-
7/8"
7/8"
3/4"
7/8"
eol
eom
ebh
ebj
eg-
eh-
1"
1 1/4"
1"
blank
fug fmf
fuh fmg
foi
foj
fbg
fbh
fnc
fnd
fh- 1 1/4"
1 1/4"
5/8"
3/4"
5/8"
1/2" guf gmf
gok
gol gbk
gk-
gl-
1 1/4" 1 1/4" cuh cmj col cbk cnl ch- 1" blank euf eme eon ebk 1 1/4" 1/2" fuj fmh fol fbj fi- 1 1/4" 3/4" 5/8" gom gm-
and add Steps 15, 16, 11, 12 for each additional section 1 1/2" blank cuj cmk com cnm 1" 1/2" eug emf ebw ej- 1 1/4" 5/8" fom fj- 1 1/4" 3/4" 3/4" gon gn-
1 1/2" 3/4" con cnn ci- 1" 5/8" eoo ek- 1 1/4" 3/4" ful fmj fon fbk fne fk- 1 1/4" 1" 3/4" goo gbl go- Mixed Porting
1 1/2" 1" cuk cml coo cbl cno cj- 1" 3/4" euh emg eop ebl end el- 1 1/4" 7/8" foo fbl fl- 1 1/4" 7/8" 7/8" gop gbm gp-
1 1/2" 1 1/4" cul cmm cop cbm cnp ck- 1" 7/8" eoq ebm em- 1 1/4" 1" fum fmk fop fbm fnf fm- 1 1/4" 1" 7/8" goq gbn gq- sfu-odt 1
1 1/2" 1 1/2" cum cmn coq cbn cnr cl- 1" 1" euj emh eor ebn ene en- 1 1/4" 1 1/4" fun fml foq fbn fng fn- 1 1/4" 1" 7/8" gor gbo gr- sfu-bspp 2
2" blank cun cbo 1 1/4" blank euk emj eos ebo 1 1/2" blank fuo fmm for fbo 1 1/4" 1" 1" gug gmg gos gbq gs- sfu-npt 3
2" 1" cup cbp cm- 1 1/4" 5/8" eot eo- 1 1/2" 3/4" fup fmn fos fbp fo- 1 1/4" 1 1/4" 1" guh gmh got gbr gt- sfm-odt 4
2" 1 1/4" cuq cmp cbq cn- 1 1/4" 3/4" eou ebp enf ep- 1 1/2" 7/8" fot fbq fp- 1 1/4" 1 1/4" 1 1/4" gui gmi gou gbs gu- sfm-bspp 5
2" 1 1/2" cur cmq cbr co- 1 1/4" 7/8" eov ebq eq- 1 1/2" 1" fuq fmo fou fbr fnh fq- 1 1/2" 3/4" 3/4" gov gbt gv- sfm-npt 6
2" 2" cus cmr cbs cp- 1 1/4" 1" eul emk eow ebr eng er- 1 1/2" 1 1/4" fur fmp fov fbs fr- 1 1/2" 7/8" 7/8" gow gbu gw- odt-bspp 7
2 1/2" 1 1/4" cut cbt cq- 1 1/4" 1 1/4" eum eml eox ebs es- 1 1/2" 1 1/2" fus fmq fow fbt fnj fs- 1 1/2" 1" 7/8" gox gbv gx- odt-npt 8
2 1/2" 1 1/2" cuw cms cbu cr- 1 1/2" blank eun emm ebt 2" 1" fut fmr fox fbu ft- 1 1/2" 1" 1" guj gmj goy gbw gy- bspp-npt 9
2 1/2" 2" cux cbv cs- 1 1/2" 1" euo emn eoy ebu et- 2" 1 1/4" fuu fms foy fbv fu- 1 1/2" 1 1/4" 1" guk gmk goz gbx gz-
special special spl 1 1/2" 1 1/4" eup emo eoz ebv eu- 2" 1 1/2" fuv fmt foz fbw fv- 1 1/2" 1 1/4" 1 1/4" gul gml hoa gby ha-
1 1/2" 1 1/2" euq emp ev- 2" 2" fuw fmu fw- 1 1/2" 1 1/2" 1" gum gmm hob gbz hb-
2" blank eur emq ew- 2 1/2" 1" fux fmv fx- 1 1/2" 1 1/2" 1 1/4" gun gmn hoc hba hc-
2" 1" eus emr ex- 2 1/2" 1 1/4" fuy fmw fy- 1 1/2" 1 1/2" 1 1/2" guo gmo hod hbb hd-
2" 1 1/4" eut ems ey- 2 1/2" 1 1/2" fuz fmx fz- 2" 1" 1" gup gmp hoe hbc he-
2" 1 1/2" euv emt ez- special special spl 2" 1 1/4" 1" guq gmq hof hbd hf-
All product listed herein is product manufactured and/or supplied by Gear Pump Manufacturing (Pty) Limited (“GPM”), a South African manufacturer and supplier of special special spl 2" 1 1/4" 1 1/4" gur gmr hog hbe hg-
replacement parts and components. 2" 1 1/2" 1" gus gms hoh hbf hh-
“Commercial Intertech” is a registered trademark or copyright of the Parker Hannifin Corporation (“Parker”). Any reference to this entity, its trademark, copyright, 2" 1 1/2" 1 1/4" gut gmt hoj hbg hj-
product or reference number, is for product comparison and reference purposes only and as such, any referral thereto should not be construed as implying in any way 2" 1 1/2" 1 1/2" guu gmu hok hbh hk-
2 that Parker product is manufactured or supplied by GPM or that GPM is in any way associated with Parker.” 2 1/2" 1" 1" guv gmv hl-
2 1/2" 1 1/4" 1" guw gmw hm-
Manufactured in South Africa Copyright © 2005 Gear Pump Manufacturing (Pty) Limited All Rights Reserved. No part of this document may be reproduced in any form or manner without permission. 2 1/2" 1 1/4" 1 1/4" gux gmx hn-
2 1/2" 1 1/2" 1" guy gmy ho-
2 1/2" 1 1/2" 1 1/4" guz gmz hp-
2 1/2" 1 1/2" 1 1/2" hua hma hq-
special special special spl
P u m p I d e n t i f i c a t i o n
A
B
SCREW IN RETAINER X
INTERNAL
120 131 125 151 176 215 230 250 265
DOWEL PINS X X X X X X X
GEAR DIAMETER 53.30 53.30 60.83 60.83 76.10 44.50 53.30 60.83 76.10
ROLLER BEARING OD 43.00 43.00 49.00 49.00 59.00
ID 27.00 27.00 32.00 32.00 38.10
BUSH OD 27.10 30.30 37.00 42.30
ID 24.30 27.40 33.20 38.50
ROTATION
TO DETERMINE ROTATION VIEW PUMP AS SHOWN. LOOK AT SHAFT END COVER OF PUMP WITH THE
DRIVE SHAFT AT THE TOP. NOTE THE LOCATION OF THE PORTS.
All product listed herein is product manufactured and/or supplied by Gear Pump Manufacturing (Pty) Limited (“GPM”), a South African manufacturer and supplier of
replacement parts and components.
“Commercial Intertech” is a registered trademark or copyright of the Parker Hannifin Corporation (“Parker”). Any reference to this entity, its trademark, copyright,
product or reference number, is for product comparison and reference purposes only and as such, any referral thereto should not be construed as implying in any way
2 that Parker product is manufactured or supplied by GPM or that GPM is in any way associated with Parker.”
Manufactured in South Africa Copyright © 2005 Gear Pump Manufacturing (Pty) Limited All Rights Reserved. No part of this document may be reproduced in any form or manner without permission.
P o r t i n g
BUSHING PUMP PORTING SUITABILITY
BEARING CARRIER 1 INLET 1 OUTLET BEARING CARRIER 1 INLET 2 OUTLET PORT END COVER - PUMP PORT END COVER - MOTOR
215 230 250 265 215 230 250 265 215 230 250 265 215 230 250 265
SFU /SFM
B 1/2" X X X X X X X X X X X X X X X
3/4" X X X X X X X X X X X X X X X
1" X X X X X X X X X X X X X X X X
A 11/4" X X X X X X X X X X X X X X X
11/2" X X X X X X X X X X X
2" X X X X X X X X
21/2" X X X X
ODT
1/2 " X X X X X X X X X X X X X X X X
3/4 " X X X X X X X X X X X X X X X X
7/8 " X X X X X X X X X X X X X X X X
1" X X X X X X X X X X X X X X X X
11/4" X X X X X X X X X X X X X X X
11/2" X X X X X X X X X X X X X X
2" X X X X
NPT
1/2" X X X X X X X X X X X X X X X X
3/4" X X X X X X X X X X X X X X X X
1" X X X X X X X X X X X X X X X X
11/4" X X X X X X X X X X X X X X X
11/2" X X X X X X X X X X X X X X
2" X X X X
BSP
1/2" X X X X X X X X X X X X X X X X
3/4" X X X X X X X X X X X X X X X X
1" X X X X X X X X X X X X X X X X
11/4" X X X X X X X X X X X X X X X
11/2" X X X X X X X X X X X X X X
2" X X X X
PORT IDENTIFICATION
PORT ID A B PORT HOLE BOLT HOLE BOLT HOLE
MM MM MM THREAD THREAD (UNC) THREAD (METRIC)
SFU / SFM
B 1/2" 12.70 38.00 17.00 5/16" X 18 M8 X 1.25
3/4" 19.05 47.63 22.22 3/8 " X 16 M10 X 1.5
1" 25.40 53.37 26.19 3/8" X 16 M10 X 1.5
A 11/4" 31.75 58.75 30.17 7/16" X 14 M10 X 1.5
11/2" 38.10 69.85 36.53 1/2" X 13 M12 X 1.75
2" 50.80 76.20 44.45 1/2" X 13 M12 X 1.75
21/2" 63.50 88.90 50.80 1/2" X 13 M12 X 1.75
ODT
1/2 " 17.50 3/4" X 16 UNF
All product listed herein is product manufactured and/or supplied by Gear Pump Manufacturing (Pty) Limited (“GPM”), a South African manufacturer and supplier of
replacement parts and components.
“Commercial Intertech” is a registered trademark or copyright of the Parker Hannifin Corporation (“Parker”). Any reference to this entity, its trademark, copyright,
product or reference number, is for product comparison and reference purposes only and as such, any referral thereto should not be construed as implying in any way
2 that Parker product is manufactured or supplied by GPM or that GPM is in any way associated with Parker.”
Manufactured in South Africa Copyright © 2005 Gear Pump Manufacturing (Pty) Limited All Rights Reserved. No part of this document may be reproduced in any form or manner without permission.
P o r t i n g
131 151 131 151 176 131 151 176 131 151 176 131 151 176 131 151 176
SFU / SFM
1/2 " X X X X X X
3/4 " X X X X X X
1" X X X X X X X X X X X X
11/4" X X X X X X X X X X
11/2" X X X X X X
2" X
21/2"
ODT
1/2 " X X X X X X X X
3/4 " X X X X X X X X X X
7/8 " X X X X X X X
1" X X X X X X X X X X X X X
11/4" X X X X X X X X
11/2" X X X X
NPT
1/2 " X X X X
3/4 " X X X X X X X X X
1" X X X X X X X X X X
11/4" X X X X X X X
11/2" X X
BSP
1/2 " X X X X
3/4 " X X X X X X X X X
1" X X X X X X X X X X
11/4" X X X X X X X
11/2" X X
131 151 176 131 151 176 131 151 176 176 176 151 176
SFU / SFM
1/2 " X X
3/4 " X X
1" X X X X X
11/4" X X X X X X X X X X X X X
11/2" X X X X X X X X X X X X X
2" X X X X X X X X X X X X X
21/2" X X X X X X
ODT
1/2 " X X X X
3/4 " X X X X X X
7/8 " X X X X
1" X X X X X X X
11/4" X X X X X X X X X
11/2" X X X X X X X X
NPT
1/2 " X X X X
3/4 " X X X X X X
1" X X X X X X X X X X
11/4" X X X X X X X X X
11/2" X X X X X X X X
BSP
1/2 "
X X X X
3/4 "
X X X X X X
1" X X X X X X X X X X
11/4" X X X X X X X X X
11/2" X X X X X X X X
All product listed herein is product manufactured and/or supplied by Gear Pump Manufacturing (Pty) Limited (“GPM”), a South African manufacturer and supplier of
replacement parts and components.
“Commercial Intertech” is a registered trademark or copyright of the Parker Hannifin Corporation (“Parker”). Any reference to this entity, its trademark, copyright,
product or reference number, is for product comparison and reference purposes only and as such, any referral thereto should not be construed as implying in any way
2 that Parker product is manufactured or supplied by GPM or that GPM is in any way associated with Parker.”
Manufactured in South Africa Copyright © 2005 Gear Pump Manufacturing (Pty) Limited All Rights Reserved. No part of this document may be reproduced in any form or manner without permission.
P T O T r u c k P u m p s
All product listed herein is product manufactured and/or supplied by Gear Pump Manufacturing (Pty) Limited (“GPM”), a South African manufacturer and supplier of
replacement parts and components.
“Commercial Intertech” is a registered trademark or copyright of the Parker Hannifin Corporation (“Parker”). Any reference to this entity, its trademark, copyright,
product or reference number, is for product comparison and reference purposes only and as such, any referral thereto should not be construed as implying in any way
2 that Parker product is manufactured or supplied by GPM or that GPM is in any way associated with Parker.”
Manufactured in South Africa Copyright © 2005 Gear Pump Manufacturing (Pty) Limited All Rights Reserved. No part of this document may be reproduced in any form or manner without permission.
P T O T r u c k P u m p s
PTO TRUCK PUMP DIMENSIONS Manufactured in South Africa
(MM)
• Working Pressure up to 300 BAR • High Strength Steel Gears • Quality Compacted Graphite Bodies
• Heavy Duty Bushing Design • Pressure Balanced Thrust Plates • Interchangeable Parts
FRAME GP265
PART NUMBER GP3-073 GP3-080 GP3-088 GP3-102 GP3-118 GP3-132 GP3-147
GEAR SIZE (IN) 1.25 1.38 1.50 1.75 2.00 2.25 2.50
DISPLACEMENT (CM3/REV) 73 80 88 102 118 132 147
PRESSURE (BAR) 270 270 270 240 240 220 200
INLET PORT (BSPP) 1.25 1.25 1.25 1.25 1.25 1.50 1.50
OUTLET PORT (BSPP x 2) 1.00 1.00 1.00 1.00 1.00 1.00 1.00
WEIGHT (KG) - UNI / DIN 13.0 / 14.0 13.5 / 14.5 14.0 / 16.0 14.0 / 16.0 14.5 / 16.5 15.0 / 16.5 15.5 / 16.5
THE ABOVE DATA ARE AVERAGE RESULTS BASED ON A SERIES OF TESTS AND ARE NOT NECESSARILY REPRESENTATIVE OF ANY SINGLE UNIT. GEAR PUMP MANUFACTURING RESERVES THE RIGHT TO AMEND THE TECHNICAL DATA WITHOUT NOTICE.
All product listed herein is product manufactured and/or supplied by Gear Pump Manufacturing (Pty) Limited (“GPM”), a South African manufacturer and supplier of
replacement parts and components.
“Commercial Intertech” is a registered trademark or copyright of the Parker Hannifin Corporation (“Parker”). Any reference to this entity, its trademark, copyright,
product or reference number, is for product comparison and reference purposes only and as such, any referral thereto should not be construed as implying in any way
2 that Parker product is manufactured or supplied by GPM or that GPM is in any way associated with Parker.”
Manufactured in South Africa Copyright © 2005 Gear Pump Manufacturing (Pty) Limited All Rights Reserved. No part of this document may be reproduced in any form or manner without permission.
D u m p P u m p s
(MM)
THE ABOVE DATA ARE AVERAGE RESULTS BASED ON A SERIES OF TESTS AND ARE NOT NECESSARILY REPRESENTATIVE OF ANY SINGLE UNIT. GEAR
PUMP MANUFACTURING RESERVES THE RIGHT TO AMEND THE TECHNICAL DATA WITHOUT NOTICE.
All product listed herein is product manufactured and/or supplied by Gear Pump Manufacturing (Pty) Limited (“GPM”), a South African manufacturer and supplier of
replacement parts and components.
“Commercial Intertech” is a registered trademark or copyright of the Parker Hannifin Corporation (“Parker”). Any reference to this entity, its trademark, copyright,
product or reference number, is for product comparison and reference purposes only and as such, any referral thereto should not be construed as implying in any way
2 that Parker product is manufactured or supplied by GPM or that GPM is in any way associated with Parker.”
Manufactured in South Africa Copyright © 2005 Gear Pump Manufacturing (Pty) Limited All Rights Reserved. No part of this document may be reproduced in any form or manner without permission.
W a r r a n t y
Limitations
This warranty is expressly in lieu of any other warranties expressed or implied including
any warranty of fitness for a particular purpose. The purchasers’ sole and exclusive remedy
under this warranty shall be limited to the repair, replacement or exchange of warranted
products at our option, F.O.B. GPM factory.
No special, incidental, consequential or other damage shall be recoverable. GPM shall not
be liable for consequential damages or contingent liabilities including, but not limited to
loss of life, personal injury, loss of crops, loss due to fire or water damage, loss of business
income, down time cost and trade or other commercial loss arising out of the failure of the
product. GPM will in no event be liable for any sum in excess of the price received by it
for the product for which liability is claimed or asserted.
All product listed herein is product manufactured and/or supplied by Gear Pump Manufacturing (Pty) Limited (“GPM”), a South African manufacturer and supplier of
replacement parts and components.
“Commercial Intertech” is a registered trademark or copyright of the Parker Hannifin Corporation (“Parker”). Any reference to this entity, its trademark, copyright,
product or reference number, is for product comparison and reference purposes only and as such, any referral thereto should not be construed as implying in any way
2 that Parker product is manufactured or supplied by GPM or that GPM is in any way associated with Parker.”
Manufactured in South Africa Copyright © 2005 Gear Pump Manufacturing (Pty) Limited All Rights Reserved. No part of this document may be reproduced in any form or manner without permission.
Manufacturing Facility - Cape Town, South Africa Remanufacturing Facility - Gauteng, South Africa
Gear Pump Distributors (UK) Ltd +44 (0) 1527 880 396 +44 (0) 1527 880 397
Unit 14, Aston Fields Trading Estate e-mail: stevek@gearpumps.co.uk
18 Sugarbrook Road, Bromsgrove lenj@gearpumps.co.uk
Worcestershire B60 3DW
ASSOCIATED COMPANIES
ENGINEERING
GEAR PUMP TECHNOLOGY
HOLDINGS MANUFACTURING SERVICES FLOW TECHNOLOGY
(Pty) Ltd PRECISION
HYDRAULICS (Pty) Ltd SYSTEMS
PROPERTIES
GEAR PUMP MANUFACTURING
DISTRIBUTORS TECHNOLOGY SERVICES
All product listed herein is product manufactured and/or supplied by Gear Pump Manufacturing (Pty) Limited (“GPM”), a South African manufacturer and supplier of
replacement parts and components.
“Commercial Intertech” is a registered trademark or copyright of the Parker Hannifin Corporation (“Parker”). Any reference to this entity, its trademark, copyright,
product or reference number, is for product comparison and reference purposes only and as such, any referral thereto should not be construed as implying in any way
2 that Parker product is manufactured or supplied by GPM or that GPM is in any way associated with Parker.”
Manufactured in South Africa Copyright © 2005 Gear Pump Manufacturing (Pty) Limited All Rights Reserved. No part of this document may be reproduced in any form or manner without permission.