13 - Servo Valve SV 10 - B (Boekwerk)

TESTO ITC KORINNA 28mm Allargato
HYDRAULIC PILOT CONTROL VALVES

SV -- SVP
Hydraulic pilot device for the remote proportional control of directional control valves or pumps.
Made of a cast iron body, a kinematic control kit with spring return, friction or detent and various control systems such as ergonomic
handles, handlevers, pedals, etc.
Each working section includes 2 off 3--way pressure reducing valves.
Reduced effort and high metering allow simple and precise operations.
Additional information
This catalogue shows the product in the most standard configurations.
Please contact Sales Dpt. for more detailed information or special request.
WARNING!
All specifications of this catalogue refer to the standard product at this date.
Walvoil, oriented to a continuous improvement, reserves the right to
discontinue, modify or revise the specifications, without notice.
WALVOIL IS NOT RESPONSIBLE FOR ANY DAMAGE CAUSED BY AN 10th edition September 2003:
INCORRECT USE OF THE PRODUCT. This edition supercedes all prior documents.
2 DFT010E
SV -- SVP
Contents
Contents
Working conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Handlever operating pilot control valve
SV01 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
SV10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
SV20 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
SV30 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Foot pedal operating pilot control valve
SVP500 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
SVP510 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
SV40 -- SV41 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
SV60 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Handwheel operating pilot control valve
SV70 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Cam operating pilot control valve
SV71 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Pressure control curves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Installation and maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
DFT010E 3
SV -- SVP
4 DFT010E
SV -- SVP
Working conditions
This catalogue shows technical specifications and diagrams measured with mineral oil of 46 mm2/s -- 46 cSt viscosity at 40°C tempera-
ture.
Minimum flow 5 l/min

Maximum flow 15 l/min
Maximum feeding pressure on inlet port P 100 bar 1450 psi
Maximum controlled pressure 64 bar 930 psi
Maximum backpressure on outlet port T 3 bar 43.5 psi
Maximum hysteresis 0,5 bar 7.25 psi
from 1.5 to 3 cm3/min from 0.09 to 0.18 in 3/min
Internal leakage (each curves) P=30bar, ν=46 mm 2/s, T=40°C
for each reducing valve for each reducing valve
Fluid Mineral oil
Fluid temperature --10° ÷ +80°C
Ambient temperature --40° ÷ +60°C
Viscosity 12 ÷ 400 mm2/s 12 ÷ 400 cSt
Max level of fluid contamination 15/12 -- ISO 4406
Tie rod tightening torque SV30 only 30 Nm 22.2 lb ft
Standard threads and fitting
BSP G1/4 30 Nm 22.1 lb/ft
tightening torque
M14x1,5 (UNI ISO 6149) 35 Nm 25.8 lb ft
9/16--18 UNF--2B (SAE6)
30 Nm 22.1 lb ft
(ISO 11926-- 1)
Weight SV01 3.8 kg 8.4 lb
SV10 -- SV11 2.1 kg -- 3 kg 4.6 lb -- 6.6 lb
SV20 4.3 kg 9.5 lb
SV30 see table on page 16
SV40 -- SV41 2.8 kg -- 3.6 kg 6.2 lb -- 7.9 lb
SV500 -- SVP510 4.2 kg -- 5.1 kg 9.3 lb -- 11.2 lb
SV60 1.7 kg 3.7 lb
SV70 1.3 kg 2.9 lb
Surface finish SV01 -- SV10 -- SV11 -- SV20 Body painted as standard, with one coat of Primer
SV30 -- SV40 -- SV41 black antirust paint
SV60 -- SV70 -- SV71 Phosphated body
SVP500 -- SVP510 Phosphated body and galvanized pedal
NOTE -- For different conditions please contact Sales Dept.
DFT010E 5
SV01 handlever operating pilot control valve
Dimensional data and hydraulic circuit
Movements
1
1--4 1--2
1
T
4 P 2
3.94
100
4 2
3
3--4 2--3
3
Monoblock joystick with 1 le- 100
ver and 4 work ports, for si- 3.94
multaneous operation of 2
sections.
Bottom P and T ports.
Handle is normally oriented Two simultaneously work ports Single work port
toward port 4.
27° 36’ 19° 42’
Hydraulic circuit
330
13
1 4 T P 3 2
10.2
0.40
Marking Production batch :

P02
5
WALVOIL production year (2002)

00001
83.3
3.28
P0200001 progressive number

WALVOIL
MADE IN ITALY
181010153
181010153
P0000001
MADE IN ITALY Code
6 DFT010E
handlever operating pilot control valve SV01
COrdering codes
Description example:
SV 01 -- B / 01 V001 - 001 A - .... .. -- .... .. -- .... .. -- <CRVN>
Body is painted as
standard, with one coat of
1. 2. 3. 4. Primer black antirust paint
1. Body kit
TYPE CODE DESCRIPTION
01-- B 5CO3014200 G 1/4 body kit 3.
2. Kinematic kits page 8
01 5ART310100 Spring return to neutral
02 5CIN100 With detent in neutral position
09 5CIN107 With cross movement selector
16 5POR361220 With microswitch for operation detection: needs
handle with type D joint
3. Handle series V with joint

Here below are listed some different configurations with mounting joint 3SOF110100
(type 1): for other configurations contact Sales Dept. or ask catalogue
code DHR001E.
Handle type V
V001 5IMP030010 Without switches (standard)
V101-- 045 5IMP031110 With nr.1 protected push--button and “horn”
symbol
V201-- 045 5IMP032011 With nr.1 protected push--button
V501-- 045 5IMP035000 With upper 3 positions (ON)/OFF/(ON)
spring return rocker switch
V041-- 045 5IMP030411 With front 3 positions ON/OFF/ON detent 2.
rocker switch
V051-- 045 5IMP030510 With front 3 positions (ON)/OFF/(ON) spring
return rocker switch
Handles type VT
VT021-- 3R2045-- 4R2045 5IMP030701 Nr.2 front 5A push--buttons
(L and R), red colour
4.
4. Pressure control valve page 27
Below are listed some types of avilable curves, for complete list see pages
from 27 to 30.
001 A 5CUR001MA With step, from 5.8 to 22 bar (84 to 319 psi)
010 A 5CUR010MA With step, from 3.25 to 15.4 bar (47 to 223 psi)
070 A 5CUR070MA With step, from 5.8 to 22.4 bar (84 to 325 psi)
075 A 5CUR075MA With step, from 5 to 15 bar (73 to 218 psi)
085 A 5CUR085MA With step, from 6 to 25 bar (87 to 363 psi)
103A 5CUR103MA Without step, from 6 to 30 bar (87 to 435 psi)
106A 5CUR106MA Without step, from 6 to 40 bar (87 to 580 psi) 1.
211A 5CUR211MA Piecewise with step, from 2 to 7 bar
(29 to 102 psi)
301A 5CUR301MA Piecewise without step, from 1.5 to 17.3 bar
(22 to 251 psi)
000 5CUR000 BSP replacing curves kit
DFT010E 7
Kinematic kits
Type 01 Type 02
Sprin return in neutral position. With lock in neutral position; unlock moving up handle.
Type 09 Type 16
Cross movement selector (to prevent contemporary move- With micro for movements detection.
ments).
8 DFT010E
Accessories
Optional handles
For SV01 remote control, series 10 and H handles are availble on request.
They are supplied with mounting joint or already assembled on joystick.
For informations, configurations and complete descriptions contact Sales Dept. or ask DHR001E catalogue.
Series 10
∅ 39
∅ 1.54
Available types
Type W: without switches
5.08
129
Type X: with upper spring return push--button

Type Z: with upper detent push--button
∅ 51.2
∅ 2.02 Type Y: with 3 positions spring return rocker switch
Type K: with upper protected spring return push--button
Type T: with 3 positions detent rocker switch
ATTENTION!
This handle needs code 3SOF1A6820 rubber bellow type as a re-
placement of standard type code 3SOF110100 (see page 7).
Series H
Holder plate
56 102
2.20 4.02
Available types
Type H: fitted up to 8 microswitch push--button, with rocker
switch and “dead man” switch
Type HM: fitted up to 4 push--buttons (100/200mA types), with
134
5.28
“dead man” and ON/OFF switches

“Dead man” Type HT: itted up to 4 push--buttons (5A types), with roker
switch switch, “dead man” and ON/OFF switches
Type HZ: with potentiometer, fitted up to 2 microswitch push--
button, “dead man” and ON/OFF switches
10
Ø56
0.39
Ø2.20
DFT010E 9
118
Hydraulic circuit 4.65
37 Ø 6.5
1.46 .26
T
P
1.65
2 1
42
2 1
6 106
0.24 4.17
Monoblock with 1 lever and

2 work ports.
Side P and T ports.
27° 36’ 27° 36’
SV11
In this type, feeding and
tank lines are bottomed by
means of a proper block.
60
2.36
13 34
11.5
292
0.51 1.34
0.24
0.98
25
P T 31.7
1.25
1.65
42
2.6
66
T
4.02
102
0.94
24
2.91
P
74
1.42
36
70
45.6 2.76
P--T bottomed block SV11 1.8
complete block Marking
Production batch : WALVOIL

P02 = production year (2002) P0200001
00001 = progressive number
181100042
Valve code
MADE IN ITALY
10 DFT010E
Ordering codes
SV 10 -- B / 01 G3 - 001 A - .... .. - <CRVN>
Body is painted as
1. 2. 3. 4. standard, with one coat of
Primer black antirust paint
1. Body kit
3.
10-- B 5CO3102200 G 1/4 body kit
11-- B 5CO3112200 Body kit with collector with bottom G 1/4
P and T ports

01 5CIN200000 Spring return to neutral
05 5CIN201000 With detent in position 1
07 5CIN203000 With detent in position 1 and 2
3. Handles with handlever

G3 5AST271216G Ogival with portlight (STANDARD)
D3 5AST271215D Spherical with portlight (Ø35)
JJ3 5AST271217J With spring return push--buttin switch (ON)/OFF
JL3 5AST271217L With 2 positions detent rocker switch ON/OFF 2.
JM3 5AST271217M With 3 pos. detent rocker switch ON/OFF/ON
JN3 5AST271217N With 2 pos. spring return rocker switch (OFF)/ON
JP3 5AST271217P With 3 pos. rocker switch, spring return in one
direction and detent in the other direction
(ON)/OFF/ON
JQ3 5AST271217Q With 3 pos. spring return rocker switch
(ON)/OFF/(ON)
2.+3. Kinematic kits with handlever page 12

For assembling reasons, the under listed kinematic kits must be supplied
complete with handle. Please contact our Sales Department for use with
different handles.
4.
02G3 5CIN204000 With detent in neutral and type G knob 11--B
03G3 5CIN208000 With friction and neutral sensing, G knob
03JJ3 5CIN210000 With friction and neutral sensing, J knob
03JQ3 5CIN215000 With friction and neutral sensing, Q knob
03JZ3 5CIN217000 With friction and neutral sensing, Z knob
10G3 5CIN218000 With friction and detent in neutral, G knob
11G3 5CIN219000 With detent in 3 positions, G knob
4. Pressure control cure page 27

from 27 to 30. 10--B
211A 5CUR211MA Piecewise with step, from 2 to 7 bar 1.
(29 to 102 psi)
301A 5CUR301MA Piecewise without step, from 1.5 to 17.3 bar
(22 to 251 psi)
DFT010E 11
Kinematic kits
With spring return With friction

Type 01 Type 03
Stop in any position and

Spring centered to neu- neutral sensing.
tral position. Available only complete
with handlever.
With detent
Type 05 Type 06 Type 07
Detent in position 1, spring centered to Detent in position 2, spring centered to Detent in position 1 and 2, spring cen-
neutral position. neutral position tered to neutral position
With detent in neutral position

Available only complete with handlever.
Type 02 Type 10 Type 11

With friction (stop in any position). Detent in positions 1 and 2.
12 DFT010E
Accessories
Optional handles
For SV10 remote control, series 10, V and H handles are availble on request; they are supplied with mounting joint or already as-
sembled on joystick.
The non--symmetrical handles (V and H series) are normally oriented toward 1 port; oil goes out from 1 port when the handle is
pushed forward (plugged ports are on the left--hand side).
For informations, configurations and complete descriptions contact Sales Dept. or ask DHR001E catalogue.
Series 10 Series V
43
∅ 39 66.5 1.69
2.62
∅ 1.54
5.08
129
145.5
5.73
Ø 56
∅ 51.2
Ø 2.20
∅ 2.02
Available types Available types

Type W: without switches Type V: available without switches or fitted with push--
Type X: with upper spring return push--button button or rocker switch (front of upper position)
Type Z: with upper detent push--button Type VM: fitted up to 4 (nr.1 upper and nr.3 front) push--
Type Y: with 3 positions spring return rocker switch buttons with 100/200mA current capability.
Type K: with upper protected spring return push--button Type VT: fitted up to 4 (nr.1 upper and nr.3 front) push--
Type T: with 3 positions detent rocker switch buttons with 5A current capability
Series H
56 102
2.20 4.02
Available types
Type H: fitted up to 8 microswitch push--button, with
rocker switch and “dead man” switch
Holder plate
Type HM: fitted up to 4 push--buttons (100/200mA types),
134
5.28
with “dead man” and ON/OFF switches

“Dead man” Type HT: fitted up to 4 push--buttons (5A types), with roker
switch switch, “dead man” and ON/OFF switches
Type HZ: with potentiometer, fitted up to 2 microswitch
push--button, “dead man” and ON/OFF switches
10
Ø56
0.39
Ø2.20
DFT010E 13
21 42
0.83 1.65
Ø 6.5
0.26
2 4
T
0.95
4.65
4.17
1.46
24
106
118
37
1 P 3
Monoblock with 2 lever and

4 work ports.
Bottom P and T ports.
0.24
44.5
6
1.75
119.5
T P
1 2 3 4
7.36
187
0.24
6
Marking
WALVOIL MADE IN ITALY WALVOIL MADE IN ITALY

P0200001 181200021
P0200001 181200021
4.01
102
Production batch : Valve code

P02 = production year (2002)
89
3.51
14 DFT010E
Codici di ordinazione
Description example: Body is painted as

standard, with one coat of
1st section 2nd section Primer black antirust paint
SV 20 -- B / 01 E -- 001 A -- .... A / 01 E - 001 A - .... A - <CRVN>
1. 2. 3. 4.
3.
1. Body kit
20-- B 5CO3104200 G 1/4 body kit

3. Handle with handlever 2.

E 5AST371215E Spherical with portlight (STANDARD)
D 5AST371216D Spherical Ø 35 mm / 1.38 in with portlight
G 5AST371217G Ogival with portlight
JJ 5AST371218J With spring return push--buttin switch
(ON)/OFF

different handles.
TYPE CODE DESCRIPTION 4.
03E 5CIN225000 With friction and neutral sensing, E knob
03G 5CIN226000 With friction and neutral sensing, G knob
4. Pressure control curve page 27

from 27 to 30
211A 5CUR211MA Piecewise with step, from 2 to 7 bar
(29 to 102 psi)
301A 5CUR301MA Piecewise without step, from 1.5 to 17.3 bar 1.
(22 to 251 psi)
DFT010E 15
T
2 4 6
4.65
0.94
1.46
118
24
37
106
4.17
1 3 5
P
6.5
0.26
6
0.24
21 42 42
0.83 1.65 1.65
It’s made by a monoblock 2

levers, 4 ports and a variable
number of single sections
with 2 ports.
Marking
WALVOIL MADE IN ITALY

P0200001 181330012
11.5
292
Production batch : Valve code


P0200001 181330012
Hydraulic circuit
T P
F
1 2 3 4 5 6 E
Hydraulic pilot control valve dimensions

E F Weight E F Weight
TYPE TYPE
mm in mm in kg lb mm in mm in kg lb
SV30/2 89 3.5 -- - 4,2 9.3 SV30/5 215 8.46 140 5.51 10,4 22.9
SV30/3 131 5.16 56 2.2 6,3 13.9 SV30/6 257 10.12 182 7.17 12,5 27.6
SV30/4 173 6.81 98 3.86 8,4 18.5 SV30/7 299 11.77 224 8.82 14,6 32.2
16 DFT010E
Ordering codes
Description example: 1 (Repeat for each section) 2 ... ... 10 (max)
SV 30 / n - B / 01 G3 - 001 A - .... A / .... / .... / .... / .... - <CRVN>

Body is painted as
n 1. 2. 3. 4. standard, with one coat of
number of sections Primer black antirust paint
3.
1. Body kit
1 Section (1.a)
30/1-- B 5CO3102201 G 1/4 body kit
2 Sections (1.b)
30/2-- B 5CO3104200 G 1/4 ports body kit with plug
From 3 to 10 sections
It’s made by a monoblock 4 ports and a variable number of single sections
with 2 ports.

06 5CIN202000 With detent in position 2 2.
3. Handle with handlever

For comploete list, refer to SV10 control valve at page 11
G3 5AST271216G Ogival with portlight (STANDARD)
D3 5AST271215D Spherical with portlight (Ø35)
4.
different handles.
1.a
02G3 5CIN204000 With detent in neutral and type G knob
03G3 5CIN208000 With friction and neutral sensing, G knob
03JJ3 5CIN210000 With friction and neutral sensing, J knob
03JQ3 5CIN215000 With friction and neutral sensing, Q knob
03JZ3 5CIN217000 With friction and neutral sensing, Z knob
10G3 5CIN218000 With friction and detent in neutral, G knob
11G3 5CIN219000 With detent in 3 positions, G knob

For complete list see pages from 27 to 30.
5. Assembling kits 5.
CODE DESCRIPTION
5TIR108056 Tie rod with nut for 3 sections
5TIR108140 Tie rod with nut for 5 sections 1.a
1.b
DFT010E 17
SVP500 foot pedal operating pilot control valve
15
0.37
0.59
9.5 T
1.57
1.65
2.6
66
40
42
9.5
.37
1 P 2
Monoblock flat rocker pedal

58 Ø9
with bottom P and T ports. 2.28 0.35
160
6.3
180
7.09
248
T P
6
0.24
13°
15°
1 2
0.24
97.4
3.83
78.1
3.08
13°
42.5
0.24 1.67
6
6.69
170
WALVOIL
P0200001
WALVOIL
181520003
P0200001
3.94
MADE IN ITALY
100
181520003
MADE IN ITALY
58
2.28
82.1 104 71.9
3.23 4.09 2.83
Valve code
Production batch :
18 DFT010E
foot pedal operating pilot control valve SVP500
Ordering codes
SVP 500 -- B / 01 - P130B x 2
1. 2.
3.
1. Body kit
500-- B 3CO3503200 G 1/4 body kit
2. Pressure control curves page 31

P030B 5CUR50030B Whithout step from 0 a 11.5 bar / 0 to 167 psi
P130B 5CUR50130B Whithout step from 5.8 to 23 bar / 84 to 334 psi
P117B 5CUR50117B Whithout step from 4 to 20 bar / 58 to 290 psi
P051B 5CUR50051B With step from 5 to 21 bar / 73 to 305 psi 2.
P006B 5CUR50006B With step from 5 to 16 bar / 73 to 232 psi
3. Kinematic kit
FOR CODE DESCRIPTION
SVP500 5CIN510 Flat rocker pedal
1.
DFT010E 19
SVP510 foot pedal operating pilot control valve
15
0.37
0.59
9.5
0.37
T
9.5
1.65
2.60
1.57
66
40
42
1 P 2
58 Ø9
2.28 Ø 0.35
160
6.30
180
7.09
Monoblock angled rocker
284
pedal with bottom P and T 11.2
ports.
154°
227.4
8.95
13°
301.5
91.3
3.59
11.9
13°
42.5
1.67
0.24
6
WALVOIL
P0200001
WALVOIL
181520006
Hydraulic circuit MADE IN ITALY
P0200001
3.94
100
T P
181520006
MADE IN ITALY
58
121.7 104 98.2

1 2 4.79 4.09 3.87
Codice
Production batch :
20 DFT010E
foot pedal operating pilot control valve SVP510
Ordering codes
SVP 510 -- B / 01 - P130B x 2
1. 2.
1. Body kit
510-- B 3CO3503200 G 1/4 body kit 3.

P030B 5CUR50030B Whithout step from 0 a 11.5 bar / 0 to 167 psi
P130B 5CUR50130B Whithout step from 5.8 to 23 bar / 84 to 334 psi
P117B 5CUR50117B Whithout step from 4 to 20 bar / 58 to 290 psi
3. Kinematic kit
FOR CODE DESCRIPTION 2.
SVP510 5CIN512 Angled rocker pedal
1.
DFT010E 21
SV40 foot pedal operating pilot control valve
1.67
42.5
P
2
2.95
160
75
6.3
1
T
Monoblock, 2 pedals and 2
work ports.
Side P and T ports.
12.5
0.49
33.5 58
Hydraulic circuit 1.32 2.28
Ø 5.5
0.22
T
P
1 2
SV41 217.5
Monoblock, 2 pedals and 2 8.56
102.5
work ports.
4.04
Side P and T ports.
0.39
60
10
2.36
13 34
WALVOIL
0.51 1.34 P0200001
7.01
178
181400004
MADE IN ITALY
0.98
25
T
P T
102
4.02
P
0.94
24
2.91
74
31.7 SV41
1.25 complete block Marking
1.42
36
Production batch : WALVOIL

P--T bottomed block 00001 = progressive number
181400004
Valve code MADE IN ITALY
22 DFT010E
foot pedal operating pilot control valve SV40
Ordering codes
SV 40 - B / 001 C - .... .. - <CRVN>
Body is painted as
1. 2. standard, with one coat of
Primer black antirust paint
3.
1. Body kits
40-- B 5CO3102200 G 1/4 body kit
41-- B 5CO3112200 Body kit with collector with bottom G 1/4
P and T ports

from 27 to 30.
001C 5CUR001MC With step, from 5.8 to 22 bar (84 to 319 psi)
016C 5CUR016MC With step, from 6 to 21.7 bar (87 to 315 psi)
022C 5CUR022MC With step, from 1 to 8 bar (15 to 116 psi)
056C 5CUR056MC With step, from 3.2 to 17.2 bar (46 to 249 psi)
068C 5CUR068MC With step, from 2 to 27.5 bar (29 to 399 psi) 2.
103C 5CUR103MC Without step, from 6 to 30 bar (87to 435 psi)
3. Kinematic kit
SV40-- SV41 5CIN400 Pedal kit
40--B
41--B
1.
DFT010E 23
SV60 foot pedal operating pilot control valve

180
7.09
102
0.2
4.02
Hydraulic circuit
5
T P
1.57
1.97
40
50
1
30 64
1.18 2.52 Ø 6.5
1 0.26
0.39
10
Monoblock, 1 pedal, 1 work
port with side P and T ports
Marking
160
6.3
WALVOIL
WALVOIL
Production batch : T P0200001
181600007
102
4.02

MADE IN ITALY
00001 = progressive number P

181600007
Valve code
MADE IN ITALY
1
Ordering codes
Description example: SV 60 -- B / 001 C

3.
1. 2.
1. Body kit
60-- B 3CO3701201 G 1/4 body kit
3. Kinematic kit
SV60 5CIN600 Pedal kit 2.

22--23--24.
016C 5CUR016MC With step, from 6 to 21.7 bar (87 to 315 psi) 1.
24 DFT010E
handwheel operating pilot control valve SV70
80 6.5
3.15 0.26
Hydraulic circuit
1.18
1.57
30
40
T P 1
57
2.24
6 68
0.24 2.68
0
9 2 1
0.16 Monoblock, handwheel

4
operated, 1 work port with
172.6
Marking side P and T ports.
6.8
WALVOIL WALVOIL
P0200001
Production batch 181700011
P0200001 MADE IN ITALY

4.02
102
P02 = production year (2002) T

00001 = progressiva number P
181700011
MADE IN ITALY
Code
Ordering codes
Description example: SV 70 - B / 001 C
3. 4.
3.
3. Body kit
70-- B 3CO3701201 G 1/4 body kit

22--23--24.
4. TYPE CODE DESCRIPTION
000 5CUR000 BSP replacing curves kitBSP
3.
3. Kinematic kit
SV70 5CIN700 Handwheel kit
DFT010E 25
SV71 cam operating pilot control valve
Hydraulic circuit
1.18
30
T P
42
1.65
57
2.24
38 9.5
1 1.5 0.37
1.22
31
Body kit with pressure
128.1
control curves and
5.04
protection plate.
Marcatura T WALVOIL
P0200001
181710004
Production batch: P
00001 = progressive number 181710004
MADE IN ITALY
Code 1 28.5
1.12
Ordering codes
Description example: SV 71 -- B / 001 C
5. 6.
5. Body kit
3.
71-- B 3CO3701201 G 1/4 body kit

22--23--24. 6.
5.
3. Kinematic kit
SV71 5CIN701 Protection plat
26 DFT010E
SV
Pressure control curve ordering codes
Description example: 5CUR 0 01 MA
1. 2. 3.
1. Curve types
TYPE DESCRIPTION TYPE DESCRIPTION
0 With Step 2 Piecewise with Step
1 Without Step 3 Piecewise without Step
3.
2. Progressive number
For complete list of available curves, refer to next pages.
3. Return spring
WORKING RANGE
TYPE CODE STANDARD APPLICATION
N lb
A 3MOL617420 from 13.7 to 27.4 from 3.08 to 6.16 SV01--SV10--SV11--SV20--SV30--SV70--SV71
B 3MOL617531 from 29.4 to 44.1 from 6.62 to 9.92
C 3MOL617451 from 73.5 to 135.2 from 16.5 to 3.42 SV40--SV41--SV60
DFT010E 27
SV
Pressure control curves with Step
Step value is the inlet pressure.
0.15 0.3 (in)

(bar) 30
360
(psi)
B
Output pressure 20 270
180
10
A 90
0
0 C 3 6 D 9
Pusher stroke (mm)
PRESSURE STROKE PRESSURE STROKE

TYPE A B C D TYPE A B C D
bar psi bar psi mm in mm in bar psi bar psi mm in mm in
001 5.8 84 22 319 1.8 0.07 8.5 0.33 038 22 319 37 537 1 0.04 8.5 0.33
002 6 87 22.5 326 2 0.08 6.5 0.26 039 2 29 8 116 0.8 0.03 6.8 0.27
003 5.5 80 28.5 413 1 0.04 8.5 0.33 040 6.6 96 20.7 300 1 0.04 8.5 0.33
004 4.9 71 18.9 274 1 0.04 8.5 0.33 041 8 116 20.7 300 1.8 0.07 8.5 0.33
005 15.1 219 27.4 397 1.2 0.05 6.5 0.26 042 2 29 13 189 1 0.04 8.5 0.33
007 6 87 37 537 1 0.04 8.5 0.33 043 3.2 47 11.7 170 1.8 0.07 8.5 0.33
008 9.8 142 26 377 1.8 0.07 8.5 0.33 044 5.8 84 22.5 326 1.6 0.06 7.2 0.28
010 3.25 47 15.4 223 1 0.04 8.5 0.33 048 7 102 22.1 321 1.2 0.05 7.5 0.29
012 14 203 29 421 1 0.04 8.5 0.33 049 6 87 21.6 313 1 0.04 7.5 0.29
013 3 44 10 145 1 0.04 8.5 0.33 053 8 116 20.7 300 1 0.04 8.5 0.33
014 3.2 46 17.2 247 2 0.08 8.5 0.33 056 3.2 47 17.2 250 1 0.04 8.5 0.33
016 6 87 21.7 315 2 0.08 6.3 0.25 057 1 15 13 189 1.8 0.07 8.5 0.33
017 5 73 12 174 1 0.04 8.5 0.33 061 1.5 22 8.5 124 1 0.04 8.5 0.33
018 5.9 86 12.9 187 1 0.04 8.5 0.33 064 0.5 7 18.4 267 1 0.04 8.5 0.33
019 0.5 7 11.4 165 1.8 0.07 8.5 0.33 065 2 29 20.5 297 1 0.04 8.5 0.33
020 4.3 62 15.2 220 1 0.04 8.5 0.33 068 2 29 27.5 399 1 0.04 8.5 0.33
021 6 87 16.3 236 1.6 0.06 7.2 0.28 069 3 44 10.5 152 0.5 0.02 8.5 0.33
022 1 15 8 116 1 0.04 8.5 0.33 070 5.8 84 22.4 325 1 0.04 8.5 0.33
023 2 29 11.5 167 1 0.04 8.5 0.33 073 4 58 18 261 1 0.04 8.5 0.33
024 5.8 84 19 276 1.8 0.07 7.2 0.28 074 5 73 25 363 2 0.08 7.8 0.31
025 5.8 84 19 276 0.9 0.04 6.5 0.25 075 5 73 15 218 1 0.04 8.5 0.33
026 6.5 94 14 203 1 0.04 8.5 0.33 077 5 73 26.9 390 1.2 0.05 8.5 0.33
027 3 44 9 131 2 0.08 8.5 0.33 080 4 58 11 160 1 0.04 8.5 0.33
028 5 73 21 305 1.1 0.04 8.7 0.34 081 8 116 14.5 210 1 0.04 7.5 0.29
029 2 29 11.5 167 2 0.08 8.5 0.33 082 8 116 22.2 322 1 0.04 8.5 0.33
030 0 0 13 189 0.5 0.02 8.5 0.33 083 0 0 64 928 1.5 0.06 8.5 0.33
031 5.8 84 19 276 1.6 0.06 7.2 0.28 084 5.7 83 24.2 351 1 0.04 8.5 0.33
032 3.4 49 29.4 426 1 0.04 8.5 0.33 085 6 87 25 363 0.9 0.04 8.5 0.33
033 5.8 84 19 276 1 0.04 8.5 0.33 086 4 58 16.5 239 0.8 0.03 7.5 0.29
037 5 73 21 305 1.2 0.05 6.5 0.26 088 5.8 84 17 247 1 0.04 8.5 0.33
28 DFT010E
SV
Pressure control curves without Step
0.15 0.3 (in)

B’ 30
(bar) 360
(psi)
Output pressure
20 270
180
10
A’ 90
0
0 C’ 3 6 9 D’
Pusher stroke (mm)
PRESSURE STROKE PRESSURE STROKE

TYPE A B C D TYPE A B C D
bar psi bar psi mm in mm in bar psi bar psi mm in mm in
101 4.4 64 19.8 287 0.4 0.02 9 0.35 136 5.8 84 23 334 1.8 0.07 9 0.35
103 6 87 30 435 2 0.08 9 0.35 150 8 116 15 217 2 0.08 9 0.35
104 8.2 119 55 798 1 004 9 0.35 151 0 0 40 580 1 0.04 5.4 0.21
105 2 29 8 116 2 0.08 9 0.35 152 3 44 23 334 0.9 0.03 9 0.35
106 6 87 40 580 0.9 0.03 9 0.35 154 2 29 15 217 0.9 0.03 9 0.35
107 4 58 19.4 281 0.4 0.02 9 0.35 162 0.7 10 30 435 1 0.04 9 0.35
111 5.5 80 25.5 370 0.9 0.03 9 0.35 163 1.4 20 11.5 167 1 0.04 9 0.35
113 5 73 21.7 315 1.2 0.05 9 0.35 166 4.3 62 15 217 1.6 0.06 9 0.35
114 4 58 10 145 2 0.08 9 0.35 167 5 73 18 261 2 0.08 9 0.35
128 0 0 64 928 2 0.08 9 0.35 169 9.8 142 21 305 1.1 0.05 7.4 0.29
134 5.8 84 23 334 1.6 0.06 9 0.35 175 5 73 16 232 1 0.04 9 0.35
135 5.8 84 23 334 0.9 0.03 9 0.35 178 6.5 94 17.8 258 1.1 0.05 7 0.27
179 6.5 94 17 246 1.1 0.05 9 0.35
DFT010E 29
SV
Piecewise pressure control curves with Step
0.15 0.3 (in)

30
(bar) 360
(psi)
270
Output pressure
20
C 180
10
B 90
A
0
0 D 3 6 E F9
Pusher stroke (mm)
PRESSURE STROKE
TYPE A B C D E F
bar psi bar psi bar psi mm in mm in mm in
201 1.5 22 8 116 15 218 2 0.08 7 0.28 8.5 0.33
211 2 29 7 102 20 290 1 0.04 5 0.20 8.5 0.33
215 4 58 7 102 10 145 1 0.04 7 0.28 8.5 0.33
Piecewise pressure control curves without Step
0.15 0.3
30
360
Output pressure (bar--psi)
20 270
C
180
10
B 90
A
0
0 D 3 6 E 9F
Pusher stroke (mm--in)
PRESSURE STROKE
TYPE A B C D E F
bar psi bar psi bar psi mm in mm in mm in
301 1.5 22 8 116 17.3 251 2 0.08 7 0.28 9 0.35
30 DFT010E
SVP
Pressure control curve ordering codes
Description example: 5CUR50 0 06 MC
1. 2. 3.
1. Curve types
TYPE DESCRIPTION TYPE DESCRIPTION
0 With Step 1 Without Step
3.
2. Progressive number
For complete list of available curves, refer to next page.
3. Return spring
WORKING RANGE
TYPE CODE STANDARD APPLICATION
N lb
B 3MOL617531 from 29.4 to 44.1 from 6.62 to 9.92
C 3MOL617451 from 73.5 to 135.2 from 16.5 to 3.42 SVP500--SVP510
DFT010E 31
SVP
Pressure control curves with Step
Step value is the inlet pressure.
0.15 0.3 (in)

(bar) 30
360
(psi)
B
270
Output pressure
20
180
10
A 90
0
0 C 3 6 D 9
Pusher stroke (mm)
PRESSURE STROKE
TYPE A B C D
bar psi bar psi mm in mm in
006 5 72.5 21 305 1.1 0.043 6.1 0.24
035 5 72.5 21 305 1.1 0.043 6.4 0.25
051 5 72.5 21 305 1.1 0.043 6.1 0.24
Pressure control curves without Step
0.15 0.3 (in)

B’ 30
(bar) 360
(psi)
Output pressure
20 270
180
10
A’ 90
0
0 C’ 3 6 9 D’
Pusher stroke (mm)
PRESSURE STROKE
TYPE A B C D
bar psi bar psi mm in mm in
117 4 58 20 290 0.5 0.020 6.5 0.26
130 5.8 84 23 334 0.9 0.035 6.4 0.25
32 DFT010E
SV -- SVP
Installation and maintenance
SV and SVP pilot control valves assembled and tested as per the technical specification of this catalogue.
Before the final installation on your equipment, follow the below recommendations:
-- the pilot valves must be assembled in horizontal position: in consideration of the mass of the kinematic and control kit, a max.
angle of 20° is allowed.
-- in order to prevent the possibility of water entering the rubber bellow, do not use high pressure wash down directly on the valve;
-- prior to painting, ensure plastic port plugs are tightly in place.
SV01 pilot control valve SVP500 pilot control valve
T
4 3 1
T P
P
2 2
1
Fitting tightening torque - Nm / lbft

THREADS TYPE All ports
BSP (ISO 228/1) G 1/4
With O--Ring seal 20 / 14.7
With copper washer 25 / 18.4
With steel and rubber washer 16 / 11.8
UN--UNF (ISO 11926--1) 9/16--18 (SAE 6)
METRICA (ISO 6149) M14x1.5
NOTE -- These torque are recommended. Assembly tightening torque depends on many factors, including lubrication, coating and
surface finish. The manufacturer shall be consulted.
DFT010E 33
SV -- SVP
Installation and maintenance
SV01 pilot control valve
SVP500 pilot control valve Pressure control curve
Callout NOTE -- All kinematic kits are lubricated with synthetic

base grease grade NLGI2
1) Valve body a) Pusher
2) Handle or foot pedal b) Pusher guide
3) Handle mounting joint c) Return spring
4) Kinematic kit d) Rod
5) Pressure control curve
6) Protective rubber bellow
Malfunction Cause Remedy

Low pump pressure and flow. Check the pump and circuit.
Inability to build pressure on ports. Check the correct fittings connections
Wrong fittings connection or tightening
and tight them to proper value.
Pressure control type is wrong. Replace with a suitable type.
The actuator of the directional control Remove the curve and replace; if
valve doesn’t reach the stroke end High leakage on pressure control curve. malfunction persists replace the pilot
control valve.
Excessive backpressure on outlet. Connect port T to another tank line.
Operation is difficult. Remove the curve and clean.
Curve rod is blocked. Check the rod conditions; if rod is
damaged replace it.
34 DFT010E
SV -- SVP
Notes
DFT010E 35
WALVOIL S.P.A.
42100 REGGIO EMILIA • ITALY • VIA ADIGE, 13/D
TEL. +39.0522.932411 • FAX +39.0522.300984
E--MAIL: INFO@WALVOIL.COM • HTTP: //WWW.WALVOIL.COM
SERVIZIO COMMERCIALE
TEL. +39.0522.932555 • FAX +39.0522.932455
D1409808I
DFT010E

13 - Servo Valve SV 10 - B (Boekwerk)

Uploaded by

Copyright:

Available Formats

13 - Servo Valve SV 10 - B (Boekwerk)

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

13 - Servo Valve SV 10 - B (Boekwerk)

Uploaded by

Copyright:

Available Formats

TESTO ITC KORINNA 28mm Allargato

HYDRAULIC PILOT CONTROL VALVES

Minimum flow 5 l/min

NOTE -- For different conditions please contact Sales Dept.

Dimensional data and hydraulic circuit

Marking Production batch :

WALVOIL production year (2002)

P0200001 progressive number

MADE IN ITALY Code

3. Handle series V with joint

Type X: with upper spring return push--button

“dead man” and ON/OFF switches

Dimensional data and hydraulic circuit

Monoblock with 1 lever and

27° 36’ 27° 36’

Production batch : WALVOIL

2. Kinematic kits page 12

3. Handles with handlever

2.+3. Kinematic kits with handlever page 12

4. Pressure control cure page 27

With spring return With friction

Stop in any position and

With detent in neutral position

Type 02 Type 10 Type 11

Available types Available types

with “dead man” and ON/OFF switches

Dimensional data and hydraulic circuit

Monoblock with 2 lever and

WALVOIL MADE IN ITALY WALVOIL MADE IN ITALY

Production batch : Valve code

Description example: Body is painted as

SV 20 -- B / 01 E -- 001 A -- .... A / 01 E - 001 A - .... A - <CRVN>

2. Kinematic kits page 12

3. Handle with handlever 2.

2.+3. Kinematic kits with handlever page 12

4. Pressure control curve page 27

Dimensional data and hydraulic circuit

It’s made by a monoblock 2

WALVOIL MADE IN ITALY

Production batch : Valve code

WALVOIL MADE IN ITALY

Hydraulic pilot control valve dimensions

Description example: 1 (Repeat for each section) 2 ... ... 10 (max)

SV 30 / n - B / 01 G3 - 001 A - .... A / .... / .... / .... / .... - <CRVN>

2. Kinematic kits page 12

3. Handle with handlever

4. Pressure control curve page 27

Dimensional data and hydraulic circuit

Monoblock flat rocker pedal

2. Pressure control curves page 31

Dimensional data and hydraulic circuit

121.7 104 98.2

2. Pressure control curve page 31

Dimensional data and hydraulic circuit

Production batch : WALVOIL

2. Pressure control curve page 27

Dimensional data and hydraulic circuit

P02 = production year (2002) P0200001