ROTARY DRILLING

BITS AND DRILL STRING TOOLS

 HEALTH AND SAFETY
INFORMATION
Safety is fundamental to us at Sandvik. Please make Consider safety when planning your schedule. Take
sure that you read and follow this information in five minutes before the start of a task to consider the
order to stay within safety guidelines. possible hazards. Perform a quick risk assessment.
Plan and apply the appropriate control measures.
SAFE WORK PROCEDURES Ensure that you have the correct resources to perform
Appropriate personal protective equipment (PPE) the task.
should be worn when working with or around rotary
tools or rock drilling. These include: Go to App store on your iOS device and search for:
- Safety helmet Sandvik Mining & Rock Technology Take Five then
- Hearing protection download the app for your own safe convenient use.
- Safety glasses
- Protective and high visibility clothing
- Safety boots
- And any site-specific PPE as required

2 Rock Tools | ROTARY DRILLING BITS AND DRILL STRING TOOLS

ROUTES OF EXPOSURE PRECAUTIONARY STATEMENTS
Grinding or heating hardmetal blanks or hardmetal - Do not breathe the dust
products will produce dust or fumes with dangerous - Wear protective gloves/protective clothing/eye
ingredients that can be inhaled or swallowed, or which protection
might come in contact with the skin or eyes. - In case of inadequate ventilation, wear respiratory
protection
ACUTE TOXICITY - Avoid release into the environment
The dust is toxic by inhalation. Inhalation may cause
irritation and inflammation in the airways. Skin contact IF INHALED: If breathing is difficult, remove the victim to
can cause irritation and rash. Sensitized people may fresh air and keep them at rest in a position comfortable
experience an allergic reaction. for breathing. If they are experiencing respiratory
symptoms: Call a POISON CENTER or doctor/physician.
CHRONIC TOXICITY
Repeated inhalation of aerosols containing cobalt may DISASSEMBLY OF HOT BIT, ROD, COUPLING,
cause obstruction in the airways. Prolonged inhalation SLEEVE, SHANKADAPTER AND INTERGRAL STEEL
of increased concentrations may cause lung fibrosis or - Ensure that products have cooled down before
lung cancer. Cobalt is a potent skin sensitizer. Repeated disassembling
or prolonged contact can cause sensitization. - Never work on hot parts
- Consider the appropriate hand protection (gloves)
CLASSIFICATION for the handling of warm parts
Following hazard classification according to GHS/CLP
applies to the hardmetal powder (3 % ≤ Co < 10 %): CLEANING OF RODS
- Acute Inhalation 3, H331: Toxic if inhaled A particular hazard exists with cleaning rods if the rods
- Carcinogenicity 1B, H350i, May cause cancer by contain explosives. Sandvik rock tools should never be
inhalation used in a hole that has been filled with explosives.
- Repr. 2, H361f; Suspected of damaging fertility
- STOT RE 1, H372: Causes damage to lungs through DEALING WITH WORN PARTS
prolonged or repeated exposure through inhalation Worn parts should be removed and disposed of appro-
- Resp. Sens. 1B, H334 : May cause allergy or asthma priately. Consider recycling any used drill bits. Please
symptoms or breathing difficulties if inhaled contact your local Sandvik representative for support
- Skin Sens.1, H317: May cause an allergic skin reaction. and further information regarding the recycling process.
- Aquatic Acute 1, H400: Very toxic to aquatic life
- Aquatic Chronic 2, H411: Toxic to aquatic life, with STORING
long lasting effects. All products should be stored in a dry place and in their
original packaging until they are required for use.

GENERAL
The products in this catalog are designed for drilling
holes in rock, and should only be used for this purpose.

ROTARY DRILLING BITS AND DRILL STRING TOOLS | Rock Tools 3

4 Rock Tools | ROTARY DRILLING BITS AND DRILL STRING TOOLS
CONTENTS

SANDVIK A TOTAL SOLUTION PROVIDER 6

ROTARY DRILL BITS OFFERING 8

BENEFITS BY APPLICATION 11

CUTTING STRUCTURE SELECTION GUIDE 15

SPECIFICATIONS 16

THE RIGHT DRILL STRING FOR ALL YOUR NEEDS 18

HIGH PERFORMANCE DRILL STRING TOOLS 20

PERFORMANCE TIPS 27

ROTARY DRILLING BITS AND DRILL STRING TOOLS | Rock Tools 5

 SANDVIK A TOTAL SOLUTION
PROVIDER
MORE THAN JUST BITS We are pleased to offer customers on site support
We pride ourselves on being your total solutions including training for the appropriate use of all our
provider and preferred partner of choice. In line with products for your application.
this value, our high performance drilling tools provide
longer life and the lowest overall operating costs. Great When you purchase our products you receive much
performing products backed by our global reach of more than a drill bit or a drill string tool. The Sandvik
experienced and dedicated personnel make us the experience includes service and support during and
natural choice as your drilling solutions provider. after the sale. Although we have a global footprint, our
service is local by design. Our sales and product spe-
We offer a variety of services designed to improve your cialists are stationed in your communities so we can
drilling process. These include: understand your needs and deliver solutions efficiently
- Drilling performance audits and recommendations and responsively. Your local Sandvik team is supported
- On-site support and services by applications engineers / drillmasters who work
- Drill rig audits including air, weight and rotation together with a focus to improve your drilling operation.
speed measurement
- Product selection and a staged plan of product
development and improvement
- Dull bit evaluation
- Classroom training
- Performance feedback

6 Rock Tools | ROTARY DRILLING BITS AND DRILL STRING TOOLS

ROTARY DRILLING BITS AND DRILL STRING TOOLS | Rock Tools 7
 ROTARY DRILL BITS OFFERING
Our bits are built for rock breaking. Choosing the correct drill bit is fundamental to successful and
economical drilling. Important factors to consider include the rock compressive strength, abrasiveness,
homogeneity, the desired penetration rate, the capabilities and characteristics of the drill rig, and previous
drilling experience at the mine.

Sandvik roller cone bits are optimized for service life at the maximum possible penetration rate for the
drilling conditions. Carbide insert grade, shape & size, and cutting structure designs are selected to achieve
the optimal balance between productivity and bit life. There is never a compromise on quality. To achieve
long life, the bearings must withstand the high axial and radial forces that are generated during drilling.
The bearing design, geometry and material selection are critical factors that go into the development of
new bits.

RR240
New for 2021, the updated RR240 product line has evolved into one of the best
performing air bearing bits in the surface mining industry. The new RR240 range
combines the best of our RR321, RR221 and RR222 air bearing products. Specific
designs have been improved with updated features to maximize bit life and operational
penetration rates in challenging environments.

AIR-BEARING TECHNOLOGY
Patented air bearing technology is optimized for high hours and maximum durability
by using advanced materials and metallurgy. This yields higher load capacity, longer
bit life, and lower cost per meter drilled.

RR240 AIR BEARING

RR240 AVAILABILITY SELECTION CHART

Softest Formation Hardest Formation

Most Aggressive Bit CUTTING STRUCTURE TYPE Least Aggressive Bit

BIT SIZE APPROX. WT.

mm inch kg / lb MT-1 X05 X10 X20 X30 X40 X47 X50 X60 X70
159 6 ¼” 21 / 46 X X
171 6 ¾" 22 / 49 X X X X X
200 7 ⅞" 35 / 78 X X X X X X
216 8 ½" 36 / 81 X X X
229 9" 43 / 96 X X X X X X
251 9 ⅞" 60 / 134 X X X X X X X
270 10 ⅝" 67 / 150 X X X X X X
311 12 ¼" 98 / 216 X X X X
349 13 ¾" 133 / 294 X
406 16" 213 / 470 X
Note:
1. Working ranges of bit types overlap, please consult your Sandvik product specialist for recommendations.
2. T
 he sizes and types listed in the table above reflect the standard bits that were available at the time we published this brochure.
Because we are continually adding new bit sizes and types to our product line, please consult with your Sandvik representative for the most current offerings.

8 Rock Tools | ROTARY DRILLING BITS AND DRILL STRING TOOLS

ROTARY DRILLING BITS AND DRILL STRING TOOLS | Rock Tools 9
 RR440
For 20 years, the RR440 Charger™ has been the benchmark of the mining industry.
It is powered by the proven Charger™ bearing technology, with cutting structure
improvements and feature optimization to maximize performance in the most
challenging drilling applications.

RR440 CHARGER™ QX2 DUAL-SEAL BEARING TECHNOLOGY

The patented QX2 bearing uses “dual seal” technology combined with Phinodal
bearing sleeves to dramatically increase weight and rotation speed capacities.
Kevlar™ coated excluder seal protects the primary seal from cuttings and debris,
making this system virtually bulletproof. The QX2 bearing delivers class leading
bearing performance, allowing drillers to to apply more weight and drill faster,
lowering your total drilling costs.
RR440 SEALED JOURNAL BEARING

RR440 AVAILABILITY SELECTION CHART

Softest Formation Hardest Formation

Most Aggressive Bit CUTTING STRUCTURE TYPE Least Aggressive Bit

BIT SIZE APPROX. WT.

mm inch kg/lb 07QX2 17QX2 20QX2 25QX2 30QX2 35QX2 37QX2 39QX2 40QX2 45QX2 50QX2 60QX2
200 7 ⅞ 35 / 77 X X
229 9 43 / 94 X X X X
251 9 ⅞ 60 / 130 X X X X X X X
270 10 ⅝ 67 / 148 X X X X X X X X X X
311 12 ¼ 98 / 216 X X X X X X X
349 13 ¾ 133 / 294 X X
406 16 213 / 470 X X
Note:
1. Working ranges of bit types overlap, please consult your Sandvik product specialist for recommendations.
2. T he sizes and types listed in the table above reflect the standard bits that were available at the time we published this brochure. Because we are continually adding
new bit sizes and types to our product line, please consult with your Sandvik representative for the most current offerings.

10 Rock Tools | ROTARY DRILLING BITS AND DRILL STRING TOOLS

BENEFITS BY APPLICATION
INTERIOR ROW INSERTS
Interior row inserts are critical for high bit life and sustained pene-
trations rate. We select the best inserts for your application specific
products.

RR240 RR440
Chisel TCI (tungsten carbide insert) provides durability and faster cutting action for soft and
 
medium-soft formations.

The unique geometry of the vector shaped interior row inserts attack the rock at the angle of

cone rotation to maximize insert penetration in soft and medium-soft formations

Sculptured inserts increase the strength by increasing cross-sectional area and by

eliminating sharp edges that cause stress risers which can lead to insert breakage. Ideal for 
soft and medium-soft formations.

Tough conical top inserts in hard rock formations and abrasive rock conditions have a
 
geometrical shape that optimizes both strength and wear resistance.

GAGE ROW INSERTS

We offer a range of gage row insert shapes suited to all drilling
applications. Insert selection is optimized for all bits in our
product range.
RR240 RR440
The chisel gage insert performs well in soft homogenous drilling conditions.  
Radial Bow chisel is a good choice in soft to medium-soft formations.  
The crest geometry of QX gage inserts present a large cross-sectional area to the rock,

creating large bottom-hole craters at the bit gage maximzing life and penetration rates.

The SWIC shape coupled with proprietary TCI grades increases gage contact in medium
 
hard abrasive drilling conditions.

Ollon, double conical and relief gage SWIC are shapes for medium-hard to hard
 
formations.
Conical inserts offer both strength and wear resistance in hard, abrasive rock.  

PATENTED TRUCUT GAGE CUTTING TECHNOLOGY

Trucut gage cutting technology uses a combination of SRT
semi-round top inserts on the gage, and patented off gage
inserts. These inserts cut the wall more efficiently, minimizing
breakage and extending bit life and penetration rates.
RR240 RR440
Trucut gage cutting technology 

ROTARY DRILLING BITS AND DRILL STRING TOOLS | Rock Tools 11

 HEEL ROW CUTTING AND REAMING TECHNOLOGY
A range of heel row configurations are available depending on the bit
design and application. These reduce gage wear and extend bit life.

RR240 RR440
Standard  
Shot-gunned  
Dual Heel   Standard Shotgunned Dual heel row

REMOVABLE AIR TUBES

Non-metallic removable air tubes allow cleaning of formation
from the air passages, if needed. This extends bit life and reduces
costs.

RR240 RR440
Non-metallic removable air tubes 

BACKFLOW VALVES Open Closed

Backflow Valve Backflow Valve
Backflow valves are a check valve limiting ingress of water and
cuttings to the bit body. This increases bit life and reduces the
incidences of bearing failure.

RR240 RR440
Back Flow Valve  

CONE WEAR PROTECTION, PATENTED RIDGE CUTTER TECHNOLOGY

Cone wear protection and patented ridge cutter features are used
to prevent excessive cone erosion and remove un-cut rock ridges
where needed in specific bit types.

RR240 RR440
Patented process applies special material to
 
minimize cone wear.

Ridge cutter cutters are rows of small diameter

inserts positioned between the main cutting 
inserts.

12 Rock Tools | ROTARY DRILLING BITS AND DRILL STRING TOOLS

LEG AND SHIRTAIL PROTECTION
Leg protection can be customized to drilling conditions, extending bit
life and increase your productivity. 3/3 leg protection is designed for
drilling wet and or dirty hole conditions where unstable hole conditions
require backreaming.

RR240 RR440
Full 3/3 leg protection for maximum wear life and
 
product performance in all applications

ASYMMETRIC LEG DESIGN

Asymetrical design of leg forgings protects the key bit components and
allows for improved bailing of drill cuttings. Combined with the prefer-
ential orientation of the nozzles, results in highly efficient bottom hole
cleaning, increasing your bit life and penetration rates.

RR240 RR440
Optimized Leg design  

PIN VENT PRESSURE COMPENSATION SYSTEM

The pin vent pressure compensation system equalizes the internal bit
pressure and external ambient pressure to prevent the ingress of cut-
tings and loss of lubricant. This optimizes seal life, extends bit life, and
reduces your downtime.

RR240 RR440
Pin Vent pressure compensation system 

HARD FACED HEEL ROW

On selected products, mainly for softer applications, a new hard faced
heel row configuration is used. This feature provides superior wear
resistance in softer but abrasive applications. It is especially effective in
rock types where heel row insert loss is primary failure mode.

RR240 RR440
Hard Faced Heel Row  

ROTARY DRILLING BITS AND DRILL STRING TOOLS | Rock Tools 13

 JET NOZZLES
Nozzles are used to regulate air flow, directing sufficient air to the bearings,
whilst ensuring good bottom hole cleaning and an acceptable bailing velocity
for the drilling environment. With correct nozzle selection, about 30 % of the air
will be directed to the bearings (air bearing bits only) with the remainder used
for hole cleaning. To achieve this, Sandvik recommends that the internal air
pressure should be between 35 – 40 PSI in all our rotary bits.

RR240 RR440

Optimized nozzle design & location  

ADVANCED MILLTOOTH CUTTING STRUCTURE DESIGNS

Milled teeth cutting structure bit designs are for maximizing penetration
rates in very soft formations. These designs use advanced hard facing
materials for optimal tooth life, bit durability and superior wear resistance.
These products have a new bit type designation, MT-1.

RR240 RR440

Advanced milltooth bit designs  

BIT THREAD CONNECTION OPTIONS

Rotary bit sizes are supplied with a default thread type which is size dependent
and consistent globally. Sandvik also supplies key bits with an alternative BECO
thread option when required.

BIT SIZE STANDARD PIN ALTERNATIVE PIN

mm inch CONNECTION CONNECTION*
159 6¼ 3 ½" API n/a
171 6¾ 3 ½" API n/a
187 7⅜ 3 ½" API n/a
200 7⅞ 4 ½" API 4 ½" BECO
216 8½ 4 ½" API n/a
229 9 4 ½" API 4 ½" BECO
251 9⅞ 6 ⅝" API 6" BECO
270 10 ⅝ 6 ⅝" API 6" BECO
311 12 ¼ 6 ⅝" API 6" BECO
349 13 ¾ 6 ⅝" API 6" BECO
406 16 7" BECO n/a
* A lternative pin connection options are only available on selected bits. Consult with your Sandvik represent-
ative for further details.

14 Rock Tools | ROTARY DRILLING BITS AND DRILL STRING TOOLS

CUTTING STRUCTURE
SELECTION GUIDE

SHALE, SILTSTONE STEPS NOTE

SANDSTONE 1. Locate ROCK COMPRESSIVE For faster drilling, use the next smaller
STRENGTH value. bit number. If insert breakage is
LIMESTONE, DOLOMITE encountered, use the next larger bit
GNEISS 2. M
 ove vertically down to the number.
SLATE FORMATION DESCRIPTION
LINE that best describes the EXAMPLE
GRANITE, MARBLE rock formation. Rock compressive strength 35,000
BASALT pounds per square inch and rock
3. M
 ove horizontally across to breaks easily – an S40s rock bit type is
DIABAS E the ROCK BIT TYPE. the best first selection.
DIORITE, GABBRO, QUARTZITE
RHYOLITE, TACONITE, BANDED IRON FORMATIONS

0 69 138 207 276 345 414 483 MPa

0 703 1406 2109 2812 3515 4218 4921 kg/cm2

0 10,000 20,000 30,000 40,000 50,000 60,000 70,000 psi

ROCK STRENGTH (UCS*) FASTEST DRILLING

RR240 RR440
X05
X10 05QX2
X20 07QX2
17QX2 25QX2
20QX2
X30
ROC X40 30QX2
R HOM K BRE
X47
BR OCK OGE AK 35QX2
OK BR
EN EA
KS NOU S EASIL 37QX2
FO MO SM Y
EL R M ATE 40QX2
AT DE RIAL X50
AS RO I O RA 39QX2
TI CK NO TE 45QX2
C RS LY
CH BRE EM EA
SIL
X60 50QX2
AR AK I-A Y
AC SW BR
FORMATION TE ITH
AS
IVE
55QX2
RI DI X70
DESCRIPTION ST
IC FF
S, IC
LINES VE UL
RY TY 60QX2
AB
RA
SI
VE

* Unconfined Compressive Strength

SLOWEST DRILLING

ROTARY DRILLING BITS AND DRILL STRING TOOLS | Rock Tools 15

 SPECIFICATIONS
RR240 GUIDELINES FOR WEIGHT-ON-BIT AND ROTATION SPEED*
BIT SIZE
mm (inches) WOB/RPM MT-1 X05/S05 X07/S07 X10/S10 S15/S17 X20/S20
171 - 187 lb (1 000's) 4 - 16 8 - 16
(6 ¾" - 7 ⅜")
tonnes 2-7 4-7
rpm 80 - 180 80 - 160
200 - 229 lb (1 000's) 8 - 16 8 - 16 8 - 16 10 - 24 12 - 33 12 - 33
(7 ⅞" - 9")
tonnes 4-7 4-7 4-7 5 - 11 5 - 15 6 - 15
rpm 90 - 160 90 - 180 90 - 160 80 - 150 80 - 150 80 - 150
251 lb (1 000's) 8 - 20 10 - 24 13 - 27 13 - 33 18 - 45
(9 ⅞")
tonnes 4 - 10 5 - 11 6 - 12 6 - 15 8 - 21
rpm 90 - 180 80 - 160 80 - 150 80 - 140 80 - 130
270 lb (1 000's) 8 - 20 13 - 27 13 - 33 18 - 45
(10 ⅝")
tonnes 4 - 10 6 - 12 6 - 15 8 - 21
rpm 90 - 180 80 - 150 80 - 140 80 - 130
311 lb (1 000's) 15 - 38 20 - 70
(12 ¼")
tonnes 7 - 17 9 - 31
rpm 80 - 150 70 - 120
349 lb (1 000's)
(13 ¾")
tonnes
rpm
406 lb (1 000's)
(16")
tonnes
rpm
* Consult with your Sandvik representative for the best operating parameters for your site conditions. Legacy products have been included for customer reference.

RR440 GUIDELINES FOR WEIGHT-ON-BIT AND ROTATION SPEED*

BIT SIZE
mm (inches) WOB/RPM MTX-1 07QX2 17QX2 20QX2 25QX2
lb (1 000's)
171 to 187
tonnes
(6 ¾" - 7 ⅜")
rpm
lb (1 000's) 9 - 20 9 - 30 14 - 37 14 - 39
200 to 229
tonnes 4-9 4 - 14 6 - 17 6- 18
(7 ⅞" - 9")
rpm 90 - 160 90 - 160 80 - 150 80 - 130
lb (1 000's) 14 - 37 20 - 50 20 - 55
251 to 270
tonnes 6 - 17 9 - 22 9 - 25
(9 ⅞" - 10 ⅝")
rpm 80 - 160 80 - 150 80 - 130
lb (1 000's)
311
tonnes
(12 ¼")
rpm
lb (1 000's)
349
tonnes
(13 ¾")
rpm
lb (1 000's)
406
tonnes
(16")
rpm
* Consult with your Sandvik representative for the best operating parameters for your site conditions. Legacy products have been included for customer reference.

16 Rock Tools | ROTARY DRILLING BITS AND DRILL STRING TOOLS

X30/S30 X40/S40 X47/S47 X50/S50 X60/S60 X70
10 - 33 12 - 42 12 - 42 20 - 45
5 -15 5 - 19 5 - 19 9 - 21
75 - 120 60 - 110 60 -110 60 - 100
16 - 35 20 - 40 20 - 40 20 - 50 25 - 55 25 - 55
7 - 16 9 - 18 9 - 18 9 - 23 11 - 25 11 - 25
75 - 120 70 - 110 60 - 110 60 - 110 60 - 100 60 - 100
18 - 50 20 - 55 25 - 75 25 - 75 25 - 80
8 - 23 9 - 25 11 - 34 11 - 34 11 - 36
75 - 120 60 - 110 60 - 90 60 - 90 60 - 90
18 - 50 25 - 60 30 - 80 25 - 85
8 - 23 11 - 27 14 - 36 11 - 39
75 - 120 60 - 110 60 - 100 60 - 90
25 - 75 27 - 85 40 - 95 40 - 110
11 - 34 12 - 38 18 - 50 18 - 50
70 - 120 60 - 110 60 - 90 60 - 90
23 - 80 30 - 90 40 - 110 50 - 120
10 - 36 14 - 40 18 - 50 23 - 54
70 - 120 60 - 110 60 - 90 50 - 85
40 - 100 50 - 120
18 - 44 23 - 54
60 - 100 50 - 85

30QX2 35QX2 37QX2 39QX2 40QX2 45QX2 50QX2 60QX2

10 - 40 18 - 47
4 - 18 8 - 21
75 - 120 60 - 110
20 - 50 20 - 50 20 - 65
9 - 23 9 - 23 9 - 30
60 - 120 60 - 120 60 - 100
20 - 60 25 - 70 25 - 75 30 - 85 35 - 85 40 - 95
9 - 27 11 - 31 11 - 34 14 - 38 16 - 38 18 - 43
70 - 120 70 - 120 65 - 110 65 - 100 60 - 100 60 - 90
25 - 75 27 - 85 30 - 95 30 - 100 30 - 100 40 - 110 50 - 120
11 - 34 12- 38 14 - 43 14 - 44 14 - 44 18 - 50 23 - 54
75 - 125 70 - 120 65 - 110 60 - 110 60 - 110 60 - 90 60 - 90
25 - 85 30 - 100 40 - 110
11 - 38 14 - 44 18 - 50
70 - 120 60 - 110 60 - 90
40 - 120 40 - 120
18 - 54 18 - 54
70 - 110 60 - 100

ROTARY DRILLING BITS AND DRILL STRING TOOLS | Rock Tools 17

 THE RIGHT DRILL STRING
FOR ALL YOUR NEEDS
ENGINEERED FOR EFFICIENCY HIGH QUALITY ASSURANCE STANDARDS
Our rotary drill string products and services maximize Our Quality Assurance program is committed to main-
productivity and minimize operating costs. Longer tool taining the highest standards in our manufacturing
service life means less downtime for you. process, delivering only superior products.
- Stringent material specifications and verification
HIGH PERFORMANCE FOR APPLICATION EXCELLENCE - Welding process control and ultrasonic weld
Our high-performance drill string components withstand inspection
extreme torsional and axial loads, efficiently handling the - Precise pipe straightness specifications and verifi-
hard rock and abrasive formations in surface mines. cation
- Thorough inspections and product testing by highly
We offer: skilled product specialists
- Extensive in-house engineering expertise - Raw material traceability
- Leading technology and intellectual property
developments MATERIALS AND RELIABILITY TESTING
- State-of-the-art manufacturing with premium Our engineers are industry-leading materials experts
quality materials who excel in the science of maximizing product reli-
- Certified quality process with rigorous product ability at materials and reliability labs in key locations
testing around the world.
- Efficient and reliable delivery times
- A thorough understanding of drilling and
applications

18 Rock Tools | ROTARY DRILLING BITS AND DRILL STRING TOOLS

 Shock cushion sub

Top (spindle) sub

starter pipe

Premium drill pipe

Rotary deck bushing

Bit sub

Rotary bit

ROTARY DRILLING BITS AND DRILL STRING TOOLS | Rock Tools 19

 HIGH PERFORMANCE
DRILL STRING TOOLS
SANDVIK DRILL PIPE

DESCRIPTION BENEFIT
The drill pipe transmits extreme - Complete product traceability
torsional and axial loads to the - Versatility in various pipe sizes
drilling tools. Because it encounters - Manufactured to the highest
various abrasive and hardness con- quality assurance standards
ditions, the drill pipe’s durability and - Optimized combination of
reliability are crucial to the drilling design, tube quality and hard
operation. facing materials
- Available in a variety of lengths

SEAM-LESS TUBING

DESCRIPTION BENEFIT
Sandvik drill pipe bodies are - The best value grades for specific
manufactured from an optimum applications
combination of premium quality, - Available in a range of high
heat-treated seamless tubing and quality material grades to opti-
hard facing material. mize your applications

RP416 & RP412

DESCRIPTION BENEFIT
The RP416 series is designed for RP416
hard abrasive formations that - More durable than a standard,
cause the body of the pipe to wear hot rolled, seamless carbon tube
out before the tool joints - Wear-resistant mid-body tube
- Special heat-treated and
Sandvik’s RP412 series premium quenched alloy
grade pipe is typically required in
non-abrasive formations when the RP412
tool joints wear out before the tube. - Premium wear quality
- ST52 hotrolled, seamless carbon
tube

20 Rock Tools | ROTARY DRILLING BITS AND DRILL STRING TOOLS

TOOL JOINTS

DESCRIPTION BENEFIT
Sandvik tool joints are fitted to the - Fast make-up of drill bit to pipe
tube body using a proprietary pro- - Better seating of threads due to
cess that ensures concentricity and accuracy of axial alignment
axial alignment. - Premium grade or modified
heat-treated material for maxi-
mum wear resistance

HARD MATERIAL WEAR PROTECTION (OPTION)

DESCRIPTION BENEFIT
Hard material wear protection can - Better wear on tool joint
be a cost-effective option when - Longer component life
applied either radially or axially on
the tool joints as well as the lower
portion of the tube.

DRILL PIPE AVAILABILITY SELECTION CHART

This selection guide recommends pipe grades appro- material. Consult your Sandvik product specialist for
priate for various rock hardness and abrasiveness, and specific recommendations for your drilling application.
suggests conditions for applying optional hard facing

SUGGESTED USE OF HARD FACING MATERIAL

LEAST ABRASIVE MOST ABRASIVE

HARDEST
ROCK SPECIAL ALLOY
ULTRA PREMIUM
RP416 SERIES

NY BILD KOMMER!
PREMIUM
RP412 SERIES

SOFTEST
ROCK

SUGGESTED USE OF HARD FACING MATERIAL

ROTARY DRILLING BITS AND DRILL STRING TOOLS | Rock Tools 21

 SANDVIK BLASTHOLE DRILL PIPE SIZES

(O.D.) OUTER WALL TUBE WEIGHT PIN BOX SET RECOMMENDED SUGGESTED
DIAMETER THICKNESS APPROX. WEIGHT CONNECTIONS BIT SIZE RANGE

mm in mm in kg/m lb/ft kg lb
101.6 4 12.7 ½ 28 19 27.2 60 2 ⅜" API REG - API IF 4 ⅝" through 5 ⅛"
114 4½ 7.33 /
5 16 19 13 59 130 3 ½" API REG - 2 ⅞" API IF - 3" BECO 4 ⅝" through 5 ⅛"
114 4½ 12.7 ½ 31 21 59 130 3 ½" API REG - 2 ⅞" API IF - 3" BECO 5 ⅝" through 6 ¼"
114 4½ 19.05 ¾ 45 30 59 130 3 ½" API REG - 2 ⅞" API IF - 3" BECO 5 ⅝” through 6 ¼”
127 5 19.05 ¾ 51 34 72.6 160 3 ½" BECO 5 ⅝" through 6 ¼"
139.7 5½ 19.05 ¾ 57 38 81.6 180 3 ½" BECO 6 ¼" through 6 ¾"
152.4 6 19.05 ¾ 63 42 108.9 240 4" BECO 6 ¾" through 7 ⅞"
152.4 6 25.4 1 79 53 108.9 240 4" BECO 7 ⅜" through 7 ⅞"
158.75 6 ¼ 19.05 ¾ 65 44 113.4 250 4" BECO 7 ⅜" through 7 ⅞"
165.1 6½ 19.05 ¾ 68 46 124.7 275 4 ½" BECO 7 ⅜" through 7 ⅞"
165.1 6½ 25.4 1 88 59 124.7 275 4 ½" BECO 7 ⅞"
177.8 7 19.05 ¾ 74 50 152 335 4 ½" BECO - 5 ¼" BECO 7 ⅞"
177.8 7 25.4 1 95 64 152 335 4 ½" BECO - 5 ¼" BECO 9"
193.67 7 ⅝ 22.2 ⅞ 94 63 181.4 400 5 ¼" BECO 9"
193.67 7 ⅝ 25.4 1 106 71 181.4 400 5 ¼" BECO 9" through 9 ⅞"
219 8⅝ 25.4 1 122 82 235.9 520 6" BECO 9" through 9 ⅞"
219 8⅝ 38.1 1½ 170 114 235.9 520 6" BECO 9 ⅞" through 11"
235 9¼ 25.4 1 131 88 267.6 590 6" BECO 9 ⅞" through 11"
235 9¼ 38.1 1½ 185 124 267.6 590 6" BECO 10 ⅝" through 11"
273 10 ¾ 25.4 1 155 104 340.2 750 8" BECO 10 ⅝" through 11"
273 10 ¾ 31.7 1¼ 189 127 340.2 750 8” BECO 12 ¼" through 13 ¾"
273 10 ¾ 38.1 1½ 220 148 340.2 750 8" BECO 12 ¼" through 13 ¾"
324 12 ¾ 25.4 1 189 127 585.1 1290 8" BECO 13 ¾" through 15"
340 13 ⅜ 31.7 1¼ 243 163 635 1400 10" BECO 15" through 17 ½"
340 13 ⅜ 38.1 1½ 286 192 635 1400 10" BECO 15" through 17 ½"

22 Rock Tools | ROTARY DRILLING BITS AND DRILL STRING TOOLS

 ROTARY SUBS AND ADAPTER

DESCRIPTION BENEFIT
Sandvik subs are used to connect - Optimum hard material wear
the various components through- protection on bit subs
out the entire drill string, from the - Hard face material in the 58 to 60
drill bit to the rotary head. Rockwell C range
- Special alloy material
- Bit (bottom) subs, top (spin-
dle) subs, cross-over subs,
thread-saver subs available
- Changes from one thread form
to another and reduce wear to
component threads
- Hard facing available on all subs
(option)

STABILIZERS

DESCRIPTION BENEFIT
Sandvik RP424 welded blade RP424
stabilizers are used to stabilize and - Minimizes rough bores, spiral
control hole deviation. Sandvik bores, ledges and crooked holes
RP424 welded blade stabilizers are - Faster bit performance reduces
used to stabilize and control hole re-drill time
deviation. It provides more reaming - Best for soft to medium forma-
and cutting action than a bit sub. tions in wet or dry conditions
For maximum rate of penetration, - Integral welded blade design
partner the RP424 with Sandvik’s with no moving parts
roller cone bits. - Specialized tungsten carbide
pad design
- Specific gage tolerances opti-
mize performance and extend
bit life
- Wide selection for various hole
and drill string sizes

24 Rock Tools | ROTARY DRILLING BITS AND DRILL STRING TOOLS

DECK BUSHINGS

DESCRIPTION BENEFIT RP434

Sandvik deck bushings run RP432 - Triple race ball bearing design
smoothly and provide extended, - Static and non-rotating with a ensures longer bearing life
trouble-free operation. They cen- solid body and no moving parts - Transmits less vibration through
tralize the drill pipe over the hole, - Replaceable wear sleeves the drill string to the rotary head
prevent misalignment of the bit and tack-welded into place - Less torque and drill pipe diame-
drill string and extend the life of the - High alloy, heat treated materials ter gouging and scraping
bit and drill string. The RP432 static provide longer service life - Smooth and quiet drill cab at-
deck bushing is not suggested for - Used when the drilling appli­ mosphere
use when rotary drilling. cation is down-the-hole (DTH) - More cost effective than static
- Available for all makes and bushings
models of drill rigs

SHOCK SUBS

DESCRIPTION BENEFIT
The shock absorber decreases RP500 Shock Cushion Sub
drilling cost, increases drilling effi- - Improves safety benefiting from - Reduces wear and damage to
ciency and enhances performance, fully sealed and maintenance threaded connections
lowering maintenance costs and free features - Provides improved bottom hole
smoothing operating conditions. Its - Minimizes shock/vibration from contact between bit and rock
inner cushion pads deaden blows, the bottom of the hole by trans- drilled
protecting the bit and lengthening ferring through the drill string - Increases drill string compo-
the life of the rotary head. - Provides rotary head and mast nents and drill bit performance
protection by reducing transfer and life
of shock and vibration

ROTARY DRILLING BITS AND DRILL STRING TOOLS | Rock Tools 25

 BIT SUBS

PIN CONNECTION OUTER DIAMETER (OD) STANDARD LENGTH SUB WEIGHT WEIGHT PER UNIT
inch mm inch mm inch lbs kgs lbs/ft kgs/m
2 ⅜ API REG 89 3 1/2 457 18 45 20 30 45
2 ⅜ API REG 102 4 457 18 60 27 40 60
2 ⅞ IF 114 4½ 457 18 70 32 46 69
3 ½ API REG 114 4½ 610 24 97 44 48 71
3 ½ API REG 127 5 610 24 122 55 61 91
3 ½ BECO 127 5 610 24 117 53 59 88
3 ½ BECO 140 5½ 610 24 145 66 73 109
4 or 4 ½ BECO 159 6¼ 610 24 176 80 88 131
4 or 4 ½ BECO 165 6½ 610 24 194 88 97 144
4 ½ BECO 178 7 610 24 230 104 115 171
5 ¼ BECO 191 7½ 610 24 270 123 134 199
5 ¼ BECO 194 7⅝ 781 30 ¾ 344 156 134 199
6 BECO 219 8⅝ 781 30 ¾ 434 197 170 253
6 BECO 235 9¼ 813 32 531 241 200 298
7 BECO 245 9⅝ 889 35 628 285 215 320
8 BECO 273 10 ¾ 889 35 743 337 255 380
8 BECO 311 12 ¼ 1067 42 1215 551 347 768
10 BECO 324 12 ¾ 1067 42 1308 593 374 557
10 BECO 340 13 ⅜ 1067 42 1462 663 418 622

STABILIZERS

HOLE SIZE BODY DIAMETER STANDARD LENGTH RP424 RP427

mm inch mm inch mm inch lbs kgs lbs kgs
159 6¼ 127 5 673 26 ½ 144 65 130 59
172 6¾ 140 5½ 673 26 ½ 210 95 163 74
199 7⅞ 159 - 178 6¼-7 673 26 ½ 250 113 220 100
229 9 194 7⅝ 724 28 ½ 350 159 290 132
250 9⅞ 219 8⅝ 781 30 ¾ 470 213 400 181
270 10 ⅝ 219 - 235 8⅝-9¼ 781 30 ¾ 520 236 460 209
279 11 235 - 245 9¼-9⅝ 781 30 ¾ 580 263 510 231
311 12 ¼ 273 10 ¾ 781 30 ¾ 790 358 650 295
349 13 ¾ 311 12 ¼ 1041 42 1130 513 1030 467
381 15 340 13 ⅜ 1041 42 1540 699 1350 612

DECK BUSHINGS

OD NOMINAL RP432 STATIC WEIGHT RP434 ROTARY WEIGHT TYPICAL PIPE OD TYPICAL BIT DATA
mm inch lbs kgs lbs kgs mm inch mm inch
191 7½ 55 - 110 25 - 50 50 - 105 23 - 48 102 - 114 4-4½ 121 - 165 4¾-6½
254 10 90 - 165 41 - 75 85 - 160 39 - 73 114 - 178 4½-7 143 - 229 5⅝-9
279 11 140 - 170 64 - 77 135 - 165 61 - 75 138 - 178 5½-7 171 - 229 6¾-9
305 12 125 - 155 57 - 70 120 - 150 54 - 68 152 - 178 6-7 187 - 229 7⅜-9
330 13 150 - 225 68 - 102 145 - 220 66 - 100 178 - 235 7-9¼ 229 - 279 9 - 11
381 15 170 - 330 77 - 150 160 - 320 73 - 145 194 - 273 7 ⅝ - 10 ¾ 229 - 311 9 - 12 ¼
406 16 195 - 360 89 - 163 185 - 350 84 - 159 219 - 273 8 ⅝ - 10 ¾ 251 - 311 9 ⅞ - 12 ¼
438 17 ¼ 360 - 400 163 - 181 350 - 390 159 - 177 273 - 340 10 ¾ - 13 ⅜ 311 - 406 12 ¼- 16
483 19 460 - 510 209 - 231 450 - 500 204 - 227 311 - 340 12 ¼ - 13 ⅜ 349 - 406 13 ¾ - 16
Approximate weight. Actual depends on inside diameter of deck opening.

26 Rock Tools | ROTARY DRILLING BITS AND DRILL STRING TOOLS

PERFORMANCE
TIPS
ROTARY DRILLING - BEST PRACTICE CHECKLIST
1. Always make up and break out bits carefully. 10. In softer rock, use lower down pressure and higher
2. Only grease the bottom ⅓rd of bit or pipe threads. rotary speeds.
3. Internal bit air pressure should be 35 - 40 PSI. 11. Do not use more water than is necessary to control
4. Always break in a new bit by drilling at a reduced dust and maintain the hole wall condition.
weight and rotation for the first hole. 12. Maintain rotation and bailing air while tripping into
5. To collar or start a new hole, reduce down pressure or out of a hole.
and rotation speed. 13. Near bit stabilization, deck centralizers, and shock
6. Always switch on the bailing air before the bit starts subs can help bit life and drill longevity. Keep these
drilling the hole and keep the air on until the bottom tools in good condition to maximize performance
of the collar is reached. and replace promptly when worn out.
7. Re-establish the bottom hole pattern with reduced 14. Always clean, dry and lubricate a bit before an idle
down pressure and rotation when drilling is inter- period and ensure the cones turn freely.
rupted. 15. Before reusing a bit that has been idle, make sure
8. Never drill an old hole with a new bit. This can pinch all cones turn freely.
the cones, damaging the bearings and prematurely 16. Bent drill steel will reduce drill bit life.
destroying the bit. 17. Record accurate drill data and note drilling issues.
9. As rock hardness increases, decrease rotary speed This information can be used to develop improved
and increase down pressure. drilling tools.

THREAD GREASE
Use Sandvik thread grease on all threaded connections
to extend thread life and prevent galling, corrosive con-
ditions and difficulty breaking connections.

WEIGHT PART
(kg) NO.
Can 4,5 795-1960
Can 18 795-1961
Low temp. Can 18 795-1963
Barrel 50 795-1967

EXAMPLE OF BIT MARKINGS

Sometimes our part numbers and serial numbers are
confused which can lead to poor data capture. Below is
an example of typical pin stamping with the key details 4.
identified. 3.

1. Serial number - H029186036 2.

2. Part number - 0038199-02
3. Type - S07 1.
4. Size - 9”

ROTARY DRILLING BITS AND DRILL STRING TOOLS | Rock Tools 27

 ROCKTECHNOLOGY.SANDVIK

C1-1139:02/ENG © SANDVIK MINING AND ROCK SOLUTIONS 2021. SANDVIK IS A TRADEMARK OWNED BY THE SANDVIK GROUP OF COMPANIES.