Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

Multi-Component Air Quality Monitor: Dimensions (MM)

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

ETL 3000

MULTI-COMPONENT AIR QUALITY MONITOR

The ETL3000 is the innovative air quality monitoring solution


designed and manufactured by Unitec for indicative measurement
(as defined by European Directive 2008/50/EC).
The ETL3000 is a multiparametric station equipped with
522 Unitec SENS-IT sensors for continuous gas monitoring with
370
210 high precision and accuracy, featured by easy use and very low
DIMENSIONS (mm) ownership costs. The IP55 case permits easy and direct outdoor
installation (no cooling system or air treatment are required!).
HIGH QUALITY DATA WITH UNITEC SENS-IT SENSORS The Unitec SENS-IT gas sensors are based on proprietary
technology and can monitor continuously gas pollutants
GAS PARAMETERS: CO, NO2 , O3, C6H6, CH4, SO2 , H2S, NH3, VOC, CO2
in outdoor applications ensuring excellent sensitivity and
FEATURES

DIRECT OUTDOOR INSTALLATION


selectivity (also at ppb levels), with no needs of frequent
EASY TO INSTALL, CONFIGURE AND SET UP maintenance or calibration. Each SENS-IT sensor is specific for
LOW PRICE a single gas and independently connected to the datalogger with
LOW POWER CONSUMPTION plug-in connector, for easy in-field replacement. The ETL3000
is equipped with internal datalogger which handles all activities,
LOW MAINTENANCE AND OWNERSHIP COSTS
including continuously data acquisition (1 data set per second),
hourly average storage and data transmission. Many options are
URBAN AIR QUALITY
APPLICATIONS

available: weather stations, GSM modem, UMTS modem (for


ROADSTREET POLLUTION
VPN connection), noise meter, solar panel kit, ecc.
INDUSTRIAL AREA AIR QUALITY Different software solutions are also available for data download,
FENCELINE MONITORING data export, unit configuration, geolocalization, real-time

LANDFILL MONITORING
visualization, ecc. A mounting kit is always supplied, suitable for
any pole diameter.
ETL 3000 PARAMETERS RANGE PRECISION RESOLUTION

CO 0.1-80 ppm 0.2 ppm 0.1 ppm

NO2 10-250 ppb 10 ppb 1 ppb


SENS-IT
(TF-MOS – Thick Film Metal O3 10-250 ppb 10 ppb 1 ppb
Oxide Semiconductor)
C6H 6 0.1-30 ppb 0.2 ppb 0.1 ppb

CH4 1-1,500 ppm 5 ppm 1 ppm

NH3 7-100 ppm 0.3 ppm 0.1 ppm

SENS-IT SO2 5-10,000 ppb 20 ppb 1 ppb


(EC - Electrochemical
Technology) H2S 2 -3,000 ppb 15 ppb 1 ppb

VOC 0.6-25 ppm 0.1 ppm 0.1 ppm

SENS-IT
CO2 10-5,000 ppm 50 ppm 1 ppm
(IR - Infrared Technology)

GENERAL SPECIFICATIONS
-20°C to +50°C
OPERATING CONDITIONS
10 to 95% RH, non-condensing

DIMENSIONS 370 x 522 (h) x 210 mm

WEIGHT ~ 10 Kg

REV. 02AB - Due to continuous product development, the technical specifications can be changed without previous notification.
EXECUTION IP55 – ready for outdoor installation - (no cooling system or air treatment is required)

POWER SUPPLY 220 V, 110V, 12V (different power kits available)

POWER CONSUMPTION Max 30 W (depends on configuration)

LCD Display
Flash memory
DATA LOGGER Frequency of readings: 1 sec
Storage of 60’ or 15’ averages
Output RS232, ASCII string

OPTIONS
Modem GSM
REMOTE COMMUNICATION
Modem UMTS with VPN functionalities

WEATHER STATIONS Wind direction, Wind speed, Temperature, Humidity, Pressure, Rainfall, Solar radiation, UV radiation

Solar panels, battery, regulator for 24 hours autonomy. This kit is designed to power an ETL3000 with
SOLAR PANEL KIT
up to 5 sensors, modem GSM and meteorological station.

NOISE METER Class 1 with 60 dB dynamic range

@COM3000 (data download, export and unit configuration)


SOFTWARE ETL BAR (real time visualization)
ETL TOTEM (data download, visualization and geolocalization)

UNITEC srl
VIA A. VOLTA, 25/B TEL. +39 049 9006921 WWW.UNITEC-SRL.COM
35030 VEGGIANO (PD) - ITALY FAX +39 049 9006935 INFO@UNITEC-SRL.COM

You might also like