PRODUCT

NEWS
Product Discontinuation
Notices August 1, 2011
Photoelectric Sensors No. 2011234E

Discontinuation Notice of Small/ flat Photoelectric Sensor

E3HF/ E3HS/ E3HT/ E3HC/ E3HQ series

Product Discontinuation Recommended Replacement

E3HF series
E3HS series E3T series
E3HT series
E3HC series
E3HQ series

Discontinuation date : The end of March, 2012

Caution on recommended replacement

- External form is changing.

- The E3T series cannot be used for the voltage input equipment as it is.
External resistance (4.7kΩ 1/4W) is necessary between brown and the black of the wiring connection
diagram.
- Response Time is shortening.
- In case of replacing E3HF series, maximum sensing distance is shortening.
- Replacement has no adjuster for sensing distance.
- Some products of light source are changed from Infrared to Red.

Difference from discontinued product

Body Dimen Wire Mounting Charact Operation Operation

Model
Color sions connection Dimensions eristics ratings methods
E3T-FT1[] * -- -- -- -- -- *

E3T-FD1[] * -- -- -- -- -- *

E3T-CT1[] * -- -- -- * * *

E3T-CD1[] * -- -- -- * * *
** : Fully compatible
* : The change is a little/Almost compatible
-- : Not compatible
- : No corresponding specification

OMRON Corporation
Industrial Automation Company
 Product Discontinuation and recommended replacement

Product discontinuation Recommended replacement

E3HC-1DE1 2M None
E3HC-1DE2 2M
E3HC-1E1 2M
E3HC-1E2 2M E3T-CT12 2M
E3HC-1L 2M None
E3HC-DS3E1 2M E3T-CD11 2M
E3HC-DS3E2 2M None
E3HF-1DE1 2M
E3HF-1DE1 5M
E3HF-1DE1-M6J 0.5M
E3HF-1DE2 2M
E3HF-1E1 10M
E3HF-1E1 2M E3T-FT11 2M
E3HF-1E1-M1J 0.3M E3T-FT11-M1TJ 0.3M
E3HF-1E2 2M E3T-FT12 2M
E3HF-1E2 5M E3T-FT12 5M
E3HF-1L 2M None
E3HF-1L 5M
E3HF-DS5E1 2M E3T-FD11 2M
E3HF-DS5E1 5M E3T-FD11 5M
E3HF-DS5E2 2M E3T-FD12 2M
E3HQ-CT11 2M None
E3HQ-CT11 5M
E3HQ-CT12 2M
E3HQ-CT12 5M
E3HQ-CT-L 2M
E3HS-1DE2 2M
E3HS-1E1 2M
E3HS-1E2 2M E3T-CT12 2M
E3HS-1E2 5M
E3HS-DS5E1 2M E3T-CD11 2M
E3HS-DS5E1 5M
E3HS-DS5E2 2M None
E3HT-1DE1 2M
E3HT-1DE2 2M
E3HT-1E1 2M
E3HT-1E1 5M
E3HT-1E2 2M E3T-CT12 2M
E3HT-1E2 5M
E3HT-1E2-30 2M None
E3HT-1L 2M
E3HT-1L 5M
E3HT-DS3E1 2M E3T-CD11 2M
E3HT-DS3E1 5M
E3HT-DS3E1-M1J 0.3M
E3HT-DS3E1-M1J 0.5M
E3HT-DS3E2 2M None
E3HT-DS3E2 5M
E3HT-DS3E2-M1J 0.5M

2
Body color

Product discontinuation Recommendable replacement

E3HF series: Black E3T-F series: Black

E3HC series: Silver E3T-C[] series: Silver

E3HS series: Silver
E3HT series: Silver

Wire connection

Product discontinuation Recommendable replacement

E3HF/ E3HS/ E3HT/ E3HC series E3T series

Receiver of Through beam / Reflective

Emitter of Through beam

3
 Mounting dimensions

Product discontinuation Recommendable replacement

E3HF/ E3HS/ E3HT/ E3HC series E3T series

E3HF E3T-FT, E3T-FD

E3HS E3T-CT

E3T-CD

E3HT
Not determined

E3HC

4
Dimensions

Product discontinuation Recommendable replacement

E3HF-1E[] E3T-FT1[]
Emitter: E3HF-1L
Receiver: E3HF-1DE[]

Emitter Emitter

Receiver Receiver

5
 Dimensions

Product discontinuation Recommendable replacement

E3HF-DS5E[] E3T-FD1[]

E3HS-1E[] E3T-CT1[]
Emitter and Receiver Emitter

Receiver

6
Dimensions

Product discontinuation Recommendable replacement

E3HS-DS5E[] E3T-CD1[]

E3HT-1E[] E3T-CT1[]
Emitter and Receiver Emitter

Receiver

7
 Dimensions

Product discontinuation Recommendable replacement

E3HT-DS3E[] E3T-CD1[]

E3T-CT1[]
E3HC-1E[] Emitter
Emitter and Receiver

Receiver

E3HC-DS3E E3T-CD1[]

8
Characteristics

Product discontinuation Recommendable replacement

Items Models E3HF-1E[] E3T-FT1[]
Sensor type Through Beam Through Beam
Sensing distance 700 mm 500 mm
Standard sensing Opaque, 3.7 mm dia. min. Opaque, 1.3 mm dia. min.
object
Differential travel - -
Directional angle Emitter/Receiver: 3 to 20° for each Emitter: 3 to 25°, Receiver: 3° min.
Light source Infrared LED (950 nm) Red LED (650 nm)
(wavelength)
Power supply voltage 12 to 24 VDC ±10%, ripple (p-p): 10% 12 to 24 VDC ±10%, ripple (p-p): 10%
max. max.
Current consumption Emitter/ Receiver: 20 mA max. for each Tatal: 30 mA max. (Emitter: 10 mA max.,
Receiver: 20 mA max).
Control output Load power supply voltage: 24 VDC Load power supply voltage: 26.4 VDC
max., Load current: 80 mA (Residual max. Load current: 50 mA max. (residual
voltage: 1 V max.), NPN voltage output voltage: 2 V max. for load current of 10 to
type, Light-ON/Dark-ON (depends on 50 mA, 1 V max. for load current of less
model) than 10 mA) , Open-collector output
Protection Circuit Power supply reverse polarity protection, Power supply/Output reverse polarity
Output short-circuit protection protection, Output short-circuit protection
Response time Operate or reset: 5 ms max. for each Operate or reset: 1 ms max. for each
Sensitivity adjustment - -
Ambient illuminance Incandescent lamp: 3,000 lx, Sunlight Incandescent lamp: 5,000 lx, Sunlight
10,000 lx 10,000 lx
Ambient temperature Operating: -25 to 55 degree C, Operating: -25 to 55 degree C,
Storage: -30 to 70°C Storage: -30 to 70°C
(with no icing or condensation) (with no icing or condensation)
Ambient humidity Operating: 35% to 85%, Operating: 35% to 85%,
Storage: 35% to 95% Storage: 35% to 95%
(with no icing or condensation) (with no icing or condensation)
Insulation resistance 20 MΩ min. at 500 VDC 20 MΩ min. at 500 VDC
Dielectric strength 500 VAC at 50/60 Hz for 1 minute 1000 VAC at 50/60 Hz for 1 minute
Vibration resistance Destruction: 10 to 55 Hz, 1.5-mm double 10 to 2,000 Hz, 1.5 mm double amplitude
(destruction) amplitude for 2 hours each in X, Y, and Z or 300 m/s2 for 0.5 hours each
directions
Shock resistance Destruction: 500 m/s2 for 3 times each in Destruction: 1,000 m/s2 for 3 times each
(destruction) X, Y, and Z directions in X, Y, and Z directions
Degree of protection IEC IP64 IP67 (IEC 60529)
Connection method Pre-wired models (standard length: 2 m) Pre-wired models (standard length: 2 m)
Weight (packed state) Approx. 110 g Approx. 40 g
Mate Case ABS PBT (polybutylene terephthalate)
rial Displaying - Denatured polyarylate
window
Lens Methacrylic resin Denatured polyarylate
Mounting - -
Bracket
Hexagon Nut - -
toothed - -
washer
Accessories Slits (width :0.5mm, 1mm, 2mm), Instruction sheet, Mounting screws (M2 ×
Instruction sheet 8), Nuts, Spring washers, Flat washers

9
 Characteristics

Product discontinuation Recommendable replacement

Items Models E3HF-DS5E[] E3T-FD1[]
Sensor type Diffuse Reflective Diffuse Reflective
Sensing distance 50 mm (White paper 30 × 30 mm) 5 to 30 mm (50 × 50 mm white paper)
Standard sensing - -
object
Differential travel 20% max. of sensing distance 6 mm max.
Directional angle - -
Light source Infrared LED (950 nm) Red (650 nm)
(wavelength)
Power supply voltage 12 to 24 VDC ±10%, ripple (p-p): 10% 12 to 24 VDC ±10%, ripple (p-p) 10%
max max.
Current consumption 30 mA max. 20 mA max.
Control output Load power supply voltage: 24 VDC Load power supply voltage: 26.4VDC
max., Load current: 80 mA (residual max. Load current: 50 mA max. (residual
voltage: 1 V max.), NPN voltage output voltage: 2 V max. for load current of 10 to
type, Light-ON/Dark-ON (depends on 50 mA, 1 V max. for load current of less
model) than 10 mA), Open-collector output
Protection Circuit Power supply reverse polarity protection, Power supply and output reverse polarity
Output short-circuit protection, Mutual protection, Output short-circuit
interference prevention protection, Mutual interference
prevention
Response time Operate or reset: 3 ms max. for each Operate or reset: 1 ms max. for each
Sensitivity adjustment Single-turn adjuster None
Ambient illuminance Incandescent lamp: 3,000 lx, Sunlight Incandescent lamp: 5,000 lx, max.,
10,000 lx Sunlight: 10,000 lx max.
Ambient temperature Operating: -25 to 55 degree C, Operating: -25 to +55 degree C,
Storage: -30 to 70 degree C Storage: -40 to +70 degree C
(with no icing or condensation) (with no icing or condensation)
Ambient humidity Operating: 35% to 85%, Operating: 35% to +85%,
Storage: 35% to 95% Storage: 35% to +95%
(with no icing or condensation) (with no icing or condensation)
Insulation resistance 20 MΩ min. at 500 VDC 20 MΩ min. at 500 VDC
Dielectric strength 500 VAC at 50/60 Hz for 1 minute 1,000 VAC, 50/60 Hz for 1 min.
Vibration resistance 10 to 55 Hz, 1.5-mm double amplitude for 10 to 2,000 Hz, 1.5-mm double amplitude
(destruction) 2 hours each in X, Y, and Z directions or 300 m/s2 for 0.5 hours each in X, Y,
and Z directions
Shock resistance 500 m/s2 for 3 times each in X, Y, and Z 1,000 m/s2 3 times each in X, Y, and Z
(destruction) directions directions
Degree of protection IEC IP64 IP67 (IEC 60529)
Connection method Pre-wired models (standard length: 2 m) Pre-wired (standard length: 2 m)
Weight (packed state) Approx. 70 g Approx. 20 g
Mate Case ABS PBT (polybutylene terephthalate)
rial Displaying - Denatured polyarylate
window
Lens Methacrylic resin Denatured polyarylate
Mounting - -
Bracket
Hexagon Nut - -
toothed - -
washer
Accessories Screwdriver for adjustment, Instruction Instruction manual, Phillips, screws(M2 ×
sheet 8), Nuts, Spring washers, Flat washers *

10
Characteristics

Product discontinuation Recommendable replacement

Items Models E3HS-1E[] E3T-CT1[]
Sensor type Thorough Beam Thorough Beam
Sensing distance 1m 1m
Standard sensing Opaque, 5.1-mm dia. min. Opaque, 4 mm dia. min.
object
Differential travel - -
Directional angle Emitter/ Receiver: 3 to 25degree C for Receiver: 2 degree
each
Light source Infrared LED (950 nm) Red (630 nm)
(wavelength)
Power supply voltage 12 to 24 VDC ±10%, ripple (p-p): 10% 12 to 24 VDC ±10%, ripple (p-p): 10%
max. max.
Current consumption Emitter/Receiver: 20 mA max. for each Total: 30 mA max. (Emitter: 15 mA max.,
Receiver: 15 mA max)
Control output Load power supply voltage: 24 VDC Load power supply voltage: 30 VDC
max., Load current: 80 mA (residual max., Load current: 80 mA (Residual
voltage: 1.2 V max.) voltage: 1 V max.),
NPN voltage output type Open collector output type
Light-ON/Dark-ON (depends on model)
Protection Circuit Power supply reverse polarity protection, Power supply reverse polarity protection,
Output short-circuit Protection Output short-circuit protection
Response time Operate or reset: 5 ms max. for each Operate or reset: 0.5 ms max.
Sensitivity adjustment - -
Ambient illuminance Incandescent lamp: 3,000 lx, Sunlight Incandescent lamp: 3,000 lx max.
10,000 lx
Ambient temperature Operating: -25 to 55°C, Operating: -25 to 55°C,
Storage: -30 to 70°C Storage: -30 to 70°C
(with no icing or condensation) (with no icing or condensation)
Ambient humidity Operating: 35% to 85%, Storage: 35% to Operating or Storage: 35% to+85% (with
95% (with no icing or condensation) no icing or condensation)
Insulation resistance 20 MΩ min. at 500 VDC 20 MΩ min. at 500 VDC
Dielectric strength 500 VAC at 50/60 Hz for 1 minute AC500V, 50/60 Hz for 1 min.
Vibration resistance 10 to 55 Hz, 1.5-mm double amplitude for Destruction: 10 to 55 Hz, 1.5-mm double
(destruction) 2 hours each in X, Y, and Z directions amplitude for 2 hours each in X, Y, and Z
directions
Shock resistance 500 m/s2 for 3 times each in X, Y, and Z 500 m/s2 for 3 times each in X, Y, and Z
(destruction) directions directions
Degree of protection IEC IP65 IP65 (IEC 60529)
Connection method Pre-wired models (standard length: 2 m) Pre-wired models (standard length: 2 m)
Weight (packed state) Approx. 120 g Approx. 60 g
Mate Case SUS304 SUS303
rial Displaying - Poly Sulfone
window
Lens Methacrylic resin Poly Sulfone
Mounting SUS304 -
Bracket
Hexagon Nut - SUS303
toothed - SUS303
washer
Accessories Mounting Bracket (with screws), Instruction sheet, Hexagon Nut, Toothed
Stoppers, Instruction sheet washer

11
 Characteristics

Product discontinuation Recommendable replacement

Items Models E3HS-DS5E[] E3T-CD1[]
Sensor type Diffuse-reflective Diffuse-reflective
Sensing distance 50 mm (White paper 30 × 30 mm) 3 to 50 mm (100 × 100 mm white paper)
Standard sensing - -
object
Differential travel 20% max. of sensing distance 15% max of the sensing Distance
Directional angle - -
Light source Infrared LED (950 nm) Infrared (870 nm)
(wavelength)
Power supply voltage 12 to 24 VDC ±10%, ripple (p-p) 10% 12 to 24 VDC ±10%, ripple (p-p) 10%
max. max.
Current consumption 30 mA max. 20 mA max.
Control output Load power supply voltage: 24 VDC Load power supply voltage: 30 VDC max.
max., Load current: 80 mA (residual Load current: 80 mA max.
voltage: 1.2 V max.) (residual voltage: 1 V max.)
NPN voltage output type Open-collector output
Light-ON/Dark-ON (depends on model)
Protection Circuit Power supply reverse polarity protection, Power supply reverse polarity protection,
Output short-circuit protection, Mutual Output short-circuit protection
interference prevention
Response time Operate or reset: 3 ms max. for each Operate or reset: 0.5 ms max.
Sensitivity adjustment Single-turn adjuster Single-turn adjuster
Ambient illuminance Incandescent lamp: 3,000 lx, Sunlight Incandescent lamp: 3,000 lx max.
10,000 lx
Ambient temperature Operating: -25 to 55°C, Operating: -25 to +55°C
Storage: -30 to 70°C Storage: -30 to +70°C
(with no icing or condensation) (with no icing or condensation)
Ambient humidity Operating: 35% to 85%, Storage: 35% to Operating or Storage: 35% to +85% (with
95% (with no icing or condensation) no icing or condensation)
Insulation resistance 20 MΩ min. at 500 VDC 20 MΩ min. at 500 VDC
Dielectric strength 500 VAC at 50/60 Hz for 1 minute 500 VAC, 50/60 Hz for 1 min.
Vibration resistance 10 to 55 Hz, 1.5-mm double amplitude for 10 to 55Hz, 1.5-mm double amplitude for
(destruction) 2 hours each in X, Y, and Z directions 2 hours each in X, Y, and Z directions
Shock resistance 500 m/s2 for 3 times each in X, Y, and Z 500 m/s2 for 3 times each in X, Y, and Z
(destruction) directions directions
Degree of protection IEC IP65 IP65 (IEC 60529)
Connection method Pre-wired models (standard length: 2 m) Pre-wired (standard length: 2 m)
Weight (packed state) Approx. 80 g Approx. 40 g
Mate Case Stainless steel (SUS304) SUS303
rial Displaying - Epoxy
window
Lens Methacrylic resin Polysulfone
Mounting Stainless steel (SUS304) -
Bracket
Hexagon Nut - SUS303
toothed - SUS303
washer
Accessories Mounting Bracket (with screws), Instruction manual, Hexagonal nuts,
Screwdriver for adjustment, Stoppers, Toothed washers, Adjustment driver
Instruction sheet

12
Characteristics

Product discontinuation Recommendable replacement

Items Models E3HT-1E[] E3T-CT1[]
Sensor type Thorough Beam Thorough Beam
Sensing distance 1m 1m
Standard sensing Opaque, 6.25-mm dia. min. Opaque, 4 mm dia. min.
object
Differential travel - -
Directional angle Emitter/Receiver: 10 to 25° for Each Receiver: 2 degree
Light source Infrared LED (950 nm) Red (630 nm)
(wavelength)
Power supply voltage 12 to 24 VDC ±10%, ripple (p-p): 10% 12 to 24 VDC ±10%, ripple (p-p): 10%
max. max.
Current consumption Emitter: 25 mA max. Total: 30 mA max. (Emitter: 15 mA max.,
Receiver: 15 mA max. Receiver: 15 mA max)
Control output Load power supply voltage: 24 VDC Load power supply voltage: 30 VDC
max., Load current: 80 mA (Residual max., Load current: 80 mA (Residual
voltage: 1 V max.), voltage: 1 V max.),
NPN voltage output type, Open collector output type
Light-ON/Dark-ON (depends on model)
Protection Circuit Power supply reverse polarity protection, Power supply reverse polarity protection,
Output short-circuit protection Output short-circuit protection
Response time Operate or reset: 5 ms max. for each Operate or reset: 0.5 ms max.
Sensitivity adjustment - -
Ambient illuminance Incandescent lamp: 3,000 lx, Sunlight Incandescent lamp: 3,000 lx max.
10,000 lx
Ambient temperature Operating: -25 to 55°C, Operating: -25 to 55°C,
Storage: -30 to 70°C Storage: -30 to 70°C
(with no icing or condensation) (with no icing or condensation)
Ambient humidity Operating: 35% to 85%, Storage: 35% to Operating or Storage: 35% to+85% (with
95% (with no icing or condensation) no icing condensation)
Insulation resistance 20 MΩ min. at 500 VDC 20 MΩ min. at 500 VDC
Dielectric strength 500 VAC at 50/60 Hz for 1 minute AC500V, 50/60 Hz for 1 min.
Vibration resistance Destruction: 10 to 55 Hz, 1.5-mm double Destruction: 10 to 55 Hz, 1.5-mm double
(destruction) amplitude for 2 hours each in X, Y, and Z amplitude for 2 hours each in X, Y, and Z
directions directions
Shock resistance Destruction: 500 m/s2 for 3 times each in 500 m/s2 for 3 times each in X, Y, and Z
(destruction) X, Y, and Z directions directions
Degree of protection IEC IP66 IP65 (IEC 60529)
Connection method Pre-wired models (standard length: 2 m) Pre-wired models (standard length: 2 m)
Weight (packed state) Approx. 130 g Approx. 60 g
Mate Case Brass SUS303
rial Displaying - Poly Sulfone
window
Lens Methacrylic resin Poly Sulfone
Mounting - -
Bracket
Hexagon Nut - SUS303
toothed - SUS303
washer
Accessories Instruction sheet Instruction sheet, Hexagon Nut, Toothed
washer

13
 Characteristics

Product discontinuation Recommendable replacement

Items Models E3HT-DS3E[] E3T-CD1[]
Sensor type Diffuse-reflective Diffuse-reflective
Sensing distance 35 mm (White paper 30 × 30 mm) 3 to 50 mm (100 × 100 mm white paper)
Standard sensing - -
object
Differential travel 20% max. of sensing distance 15% max of the sensing Distance
Directional angle - -
Light source Infrared LED (940 nm) Infrared (870 nm)
(wavelength)
Power supply voltage 12 to 24 VDC ±10%, ripple (p-p): 10% 12 to 24 VDC ±10%, ripple (p-p) 10%
max. max.
Current consumption 30 mA max. 20 mA max.
Control output Load power supply voltage: 24 VDC Load power supply voltage: 30 VDC max.
max., Load current: 80 mA (Residual Load current: 80 mA max. (Residual
voltage: 1 V max.) voltage: 1 V max.)
NPN voltage output type Open-collector output
Light-ON/Dark-ON (depends on model)
Protection Circuit Power supply reverse polarity protection, Power supply reverse polarity protection,
Output short-circuit protection, Output short-circuit protection
Mutual interference prevention
Response time Operate or reset: 3 ms max. for each Operate or reset: 0.5 ms max.
Sensitivity adjustment - Single-turn adjuster
Ambient illuminance Incandescent lamp: 3,000 lx, Sunlight Incandescent lamp: 3,000 lx max.
10,000 lx
Ambient temperature Operating: -25 to 55°C, Operating: -25 to +55°C,
Storage: -30 to 70°C Storage: -30 to +70°C,
(with no icing or condensation) (with no icing or condensation)
Ambient humidity Operating: 35% to 85%, Storage: 35% to Operating or Storage: 35% to +85% (with
95% (with no icing or condensation) no icing or condensation)
Insulation resistance 20 MΩ min. at 500 VDC 20 MΩ min. at 500 VDC
Dielectric strength 500 VAC at 50/60 Hz for 1 minute 500 VAC, 50/60 Hz for 1 min.
Vibration resistance Destruction: 10 to 55 Hz, 1.5-mm double 10 to 55Hz, 1.5-mm double amplitude for
(destruction) amplitude for 2 hours each in X, Y, and Z 2 hours each in X, Y, and Z directions
directions
Shock resistance Destruction: 500 m/s2 for 3 times each in 500 m/s2 for 3 times each in X, Y, and Z
(destruction) X, Y, and Z directions directions
Degree of protection IEC IP66 IP65 (IEC 60529)
Connection method Pre-wired (standard length: 2 m) Pre-wired (standard length: 2 m)
Weight (packed state) Approx. 80 g Approx. 40 g
Mate Case Brass SUS303
rial Displaying - Epoxy
window
Lens Methacrylic resin Polysulfone
Mounting - -
Bracket
Hexagon Nut - SUS303
toothed - SUS303
washer
Accessories Instruction sheet Instruction manual, Hexagonal nuts,
Toothed washers, Adjustment driver

14
Characteristics

Product discontinuation Recommendable replacement

Items Models E3HC-1E[] E3T-CT1[]
Sensor type Thorough Beam Thorough Beam
Sensing distance 1m 1m
Standard sensing Opaque, 6.25-mm dia. min. Opaque, 4 mm dia. min.
object
Differential travel - -
Directional angle Emitter/Receiver: 10 to 25° for Each Receiver: 2 degree
Light source Infrared LED (950 nm) Red (630 nm)
(wavelength)
Power supply voltage 12 to 24 VDC ±10%, ripple (p-p): 10% 12 to 24 VDC ±10%, ripple (p-p): 10%
max. max.
Current consumption Emitter: 25 mA max. Total: 30 mA max. (Emitter: 15 mA max.,
Receiver: 15 mA max. Receiver: 15 mA max)
Control output Load power supply voltage: 24 VDC Load power supply voltage: 30 VDC
max., Load current: 80 mA (Residual max., Load current: 80 mA (Residual
voltage: 1 V max.) voltage: 1 V max.),
NPN voltage output type Open collector output type
Light-ON/Dark-ON (depends on model)
Protection Circuit Power supply reverse polarity protection, Power supply reverse polarity protection,
Output short-circuit protection Output short-circuit protection
Response time Operate or reset: 5 ms max. for each Operate or reset: 0.5 ms max.
Sensitivity adjustment - -
Ambient illuminance Incandescent lamp: 3,000 lx, Sunlight Incandescent lamp: 3,000 lx max.
10,000 lx
Ambient temperature Operating: -25 to 55°C, Operating: -25 to 55°C,
Storage: -30 to 70°C Storage: -30 to 70°C
(with no icing or condensation) (with no icing or condensation)
Ambient humidity Operating: 35% to 85%, Storage: 35% to Operating or Storage: 35% to+85% (with
95% (with no icing or condensation) no icing or condensation)
Insulation resistance 20 MΩ min. at 500 VDC 20 MΩ min. at 500 VDC
Dielectric strength 500 VAC at 50/60 Hz for 1 minute AC500V, 50/60 Hz for 1 min.
Vibration resistance Destruction: 10 to 55 Hz, 1.5-mm double Destruction: 10 to 55 Hz, 1.5-mm double
(destruction) amplitude for 2 hours each in X, Y, and Z amplitude for 2 hours each in X, Y, and Z
directions directions
Shock resistance Destruction: 500 m/s2 for 3 times each in 500 m/s2 for 3 times each in X, Y, and Z
(destruction) X, Y, and Z directions directions
Degree of protection IEC IP66 IP65 (IEC 60529)
Connection method Pre-wired (standard length: 2 m) Pre-wired (standard length: 2 m)
Weight (packed state) Approx. 110 g Approx. 60 g
Mate Case SUS304 SUS303
rial Displaying - Poly Sulfone
window
Lens Methacrylic resin Poly Sulfone
Mounting SUS304 -
Bracket
Hexagon Nut - SUS303
toothed - SUS303
washer
Accessories Mounting bracket (with screws), Instruction sheet, Hexagon Nut, Toothed
Instruction sheet washer

15
 Characteristics

Product discontinuation Recommendable replacement

Items Models E3HC-DS3E[] E3T-CD1[]
Sensor type Diffuse-reflective Diffuse-reflective
Sensing distance 35 mm (White paper 30 × 30 mm) 3 to 50 mm (100 × 100 mm white paper)
Standard sensing - -
object
Differential travel 20% max. of sensing distance 15% max of the sensing Distance
Directional angle - -
Light source Infrared LED (940 nm) Infrared (870 nm)
(wavelength)
Power supply voltage 12 to 24 VDC ±10%, ripple (p-p): 10% 12 to 24 VDC ±10%, ripple (p-p) 10%
max. max.
Current consumption 30 mA max. 20 mA max.
Control output Load power supply voltage: 24 VDC Load power supply voltage: 30 VDC max.
max., Load current: 80 mA (Residual Load current: 80 mA max.
voltage: 1 V max.) (Residual voltage: 1 V max.)
NPN open collector output type Open-collector output
Light-ON/Dark-ON (depends on model)
Protection Circuit Power supply reverse polarity protection, Power supply reverse polarity protection,
Output short-circuit protection, Mutual Output short-circuit protection
interference prevention
Response time Operate or reset: 3 ms max. for each Operate or reset: 0.5 ms max.
Sensitivity adjustment - Single-turn adjuster
Ambient illuminance Incandescent lamp: 3,000 lx, Sunlight Incandescent lamp: 3,000 lx max.
10,000 lx
Ambient temperature Operating: -25 to 55°C, Operating: -25 to +55°C
Storage: -30 to 70°C Storage: -30 to +70°C
(with no icing or condensation) (with no icing or condensation)
Ambient humidity Operating: 35% to 85%, Storage: 35% to Operating or Storage: 35% to +85% (with
95% (with no icing or condensation) no condensation)
Insulation resistance 20 MΩ min. at 500 VDC 20 MΩ min. at 500 VDC
Dielectric strength 500 VAC at 50/60 Hz for 1 minute 500 VAC, 50/60 Hz for 1 min.
Vibration resistance Destruction: 10 to 55 Hz, 1.5-mm double 10 to 55Hz, 1.5-mm double amplitude for
(destruction) amplitude for 2 hours each in X, Y, and Z 2 hours each in X, Y, and Z directions
directions
Shock resistance Destruction: 500 m/s2 for 3 times each in 500 m/s2 for 3 times each in X, Y, and Z
(destruction) X, Y, and Z directions directions
Degree of protection IEC IP66 IP65 (IEC 60529)
Connection method Pre-wired (standard length: 2 m) Pre-wired (standard length: 2 m)
Weight (packed state) Approx. 75 g Approx. 40 g
Mate Case SUS304 SUS303
rial Displaying - Epoxy
window
Lens Methacrylic resin Polysulfone
Mounting SUS304 -
Bracket
Hexagon Nut - SUS303
toothed - SUS303
washer
Accessories Mounting bracket (with screws) Instruction sheet, Hexagon Nut Toothed
Instruction sheet washers, Adjustment driver

16
Operation ratings
Operation Characteristic

Product discontinuation Recommendable replacement

Parallel Operating Range

<Through-beam> <Through-beam>

E3HF-1E[] E3T-FT1[]

E3HS-1E[]
E3T-CT1[]

E3HT-1E[], E3HC-1E[]

17
 Operation ratings
Operation Characteristic

Product discontinuation Recommendable replacement

< Diffuse-reflective > < Diffuse-reflective >

E3HF-DS5E[] E3T-FD1[]

E3T-CD1[]
E3HS-DS5E[]

E3HT-DS3E[], E3HC-DS3E[]

18