Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 52 views

    Specifications: 2008 Ford Edge SE 2008 Ford Edge SE

    Uploaded by

    Carlos Velázquez

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Specifications: 2008 Ford Edge SE 2008 Ford Edge SE

    Uploaded by

    Carlos Velázquez
    52 views6 pages

    Original Title

    Fuel Charging

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    52 views6 pages

    Specifications: 2008 Ford Edge SE 2008 Ford Edge SE

    Uploaded by

    Carlos Velázquez

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 6

    2008 Ford Edge SE

    2008 ENGINE PERFORMANCE Fuel Charging & Controls - 3.5L - Edge & MKX

    2008 ENGINE PERFORMANCE

    Fuel Charging & Controls - 3.5L - Edge & MKX

    SPECIFICATIONS
    Material
    Item Specification Fill Capacity
    Motorcraft SAE 5W-20 Premium
    Synthetic Blend Motor Oil
    XO-5W20-QSP (US); Motorcraft
    WSS-M2C930-A -
    SAE 5W-20 Super Premium
    Motor Oil CXO-5W20-LSP12
    (Canada); or equivalent

    TORQUE SPECIFICATIONS
    Description Nm lb-in
    Fuel rail bolts 10 89
    Throttle Body (TB) bolts 10 89

    DESCRIPTION AND OPERATION


    FUEL CHARGING AND CONTROLS

    Sequential Multi-Port Fuel Injection (SFI)

    The fuel charging and controls system consists of the:

     Throttle Body (TB).


     fuel injectors.
     fuel rail.

    The fuel charging and controls system is:

     a Sequential Multi-Port Fuel Injection (SFI) system.


     pulse-width modulated.
     Mass Air Flow (MAF) controlled.

    Fuel is metered into each intake port in a sequential firing order. Fuel injectors pulse to follow engine firing
    order, in accordance with engine demand, on a tuned intake manifold.

    The basic fuel requirement of the engine is determined from the data supplied to the PCM by the MAF sensor,
    which measures the amount of air being drawn into the engine.

    Microsoft
    Friday, September 25, 2009 11:25:32
    11:25:28 AM Page 1 © 2005 Mitchell Repair Information Company, LLC.
    2008 Ford Edge SE
    2008 ENGINE PERFORMANCE Fuel Charging & Controls - 3.5L - Edge & MKX

    The various sensors detect any changes in the operating conditions and send signals to the PCM. This permits
    the PCM to control the opening duration (pulse width) of the fuel injectors and maintain optimum exhaust
    emission control and engine performance for all operating conditions.

    Throttle Body (TB)

    The TB:

     controls air supply to the intake manifold by electronically positioning the throttle plate.
     is not adjustable.

    Fuel Injectors

    The fuel injectors:

     are electronically operated by the PCM.


     atomize the fuel as the fuel is delivered.
     each have an internal solenoid that opens a needle valve, which injects fuel into the intake port in the
    cylinder head.
     are deposit resistant.

    Fuel Rail

    The fuel rail:

     receives fuel from the fuel supply tube.


     delivers fuel to the fuel injectors.

    DIAGNOSTIC TESTS
    FUEL CHARGING AND CONTROLS

    Refer to the Introduction - Gasoline Engines article.

    REMOVAL AND INSTALLATION


    THROTTLE BODY

    Microsoft
    Friday, September 25, 2009 11:25:28 AM Page 2 © 2005 Mitchell Repair Information Company, LLC.
    2008 Ford Edge SE
    2008 ENGINE PERFORMANCE Fuel Charging & Controls - 3.5L - Edge & MKX

    Fig. 1: Exploded View Of Throttle Body With Torque Specification


    Courtesy of FORD MOTOR CO.

    Item Part Number Description


    Electronic throttle control electrical
    1 14A464
    connector (part of 12B637)
    2 W503285 Throttle body (TB) bolt (4 required)
    3 9E926 TB
    4 9E936 TB gasket

    REMOVAL AND INSTALLATION

    CAUTION: The throttle body (TB) must be removed from the vehicle to be cleaned. Do
    not hold the throttle plate open with any object that could scratch the bore
    or plate while servicing or cleaning the TB.

    1. Remove the air cleaner outlet pipe. For additional information, refer to INTAKE AIR DISTRIBUTION
    AND FILTERING article.
    2. Disconnect the electronic throttle control electrical connector.
    3. Remove the 4 bolts and the throttle body (TB).
     Discard the TB gasket.

     To install, tighten to 10 Nm (89 lb-in).

    NOTE: Install a new TB gasket.


    Microsoft
    Friday, September 25, 2009 11:25:28 AM Page 3 © 2005 Mitchell Repair Information Company, LLC.
    2008 Ford Edge SE
    2008 ENGINE PERFORMANCE Fuel Charging & Controls - 3.5L - Edge & MKX

    4. To install, reverse the removal procedure.

    FUEL RAIL AND FUEL INJECTOR - EXPLODED VIEW

    Fig. 2: Exploded View Of Fuel Rail & Fuel Injector With Torque Specification
    Courtesy of FORD MOTOR CO.

    Item Part Number Description


    Fuel tube-to-fuel rail quick connect
    1 9J279
    coupling
    Fuel injector electrical connector (6
    2 14A464
    required) (part of 12B637)
    3 W503279 Fuel rail bolt (4 required)
    4 9F792 Fuel rail

    Microsoft
    Friday, September 25, 2009 11:25:28 AM Page 4 © 2005 Mitchell Repair Information Company, LLC.
    2008 Ford Edge SE
    2008 ENGINE PERFORMANCE Fuel Charging & Controls - 3.5L - Edge & MKX

    5 9N976 Fuel injector clip (6 required)


    6 9F593 Fuel injector (6 required)
    Upper fuel injector O-ring seal (6
    7 9229
    required)
    Lower fuel injector O-ring seal (6
    8 9229
    required)

    1. For additional information, refer to the procedures in this article.

    FUEL RAIL

    Material
    Item Specification
    Motorcraft SAE 5W-20 Premium Synthetic Blend
    Motor Oil
    XO-5W20-QSP (in Canada Motorcraft SAE 5W-20 WSS-M2C930-A
    Super Premium Motor Oil CXO-5W20-LSP12) or
    equivalent

    REMOVAL

    WARNING: Do not smoke, carry lighted tobacco or have an open flame of any type
    when working on or near any fuel-related component. Highly flammable
    mixtures are always present and may be ignited. Failure to follow these
    instructions may result in serious personal injury.

    WARNING: Before working on or disconnecting any of the fuel tubes or fuel system
    components, relieve the fuel system pressure to prevent accidental
    spraying of fuel. Fuel in the fuel system remains under high pressure,
    even when the engine is not running. Failure to follow this instruction
    may result in serious personal injury.

    1. Disconnect the battery ground cable. For additional information refer to BATTERY, MOUNTING AND
    CABLES article.
    2. Release the fuel system pressure. For additional information, refer to FUEL SYSTEM - GENERAL
    INFORMATION article.
    3. Remove the upper intake manifold. For additional information, refer to ENGINE - 3.5L article.
    4. Disconnect the fuel tube-to-fuel rail quick connect coupling. For additional information, refer to FUEL
    SYSTEM - GENERAL INFORMATION article.
    5. Disconnect the 6 fuel injector electrical connectors.
    6. Remove the 4 fuel rail bolts.
    7. Remove the fuel rail and injectors as an assembly.
    8. Remove the 6 fuel injector clips and the 6 fuel injectors.

    Microsoft
    Friday, September 25, 2009 11:25:28 AM Page 5 © 2005 Mitchell Repair Information Company, LLC.
    2008 Ford Edge SE
    2008 ENGINE PERFORMANCE Fuel Charging & Controls - 3.5L - Edge & MKX

     Remove and discard the 12 fuel injector O-ring seals.

    INSTALLATION

    CAUTION: Use O-ring seals that are made of special fuel-resistant material. The
    use of ordinary O-rings seals can cause the fuel system to leak. Do
    not reuse the O-ring seals.

    NOTE: The upper and lower O-ring seals are not interchangeable.

    NOTE: Install new fuel injector O-ring seals and lubricate them with clean engine
    oil.

    1. Install the 6 fuel injectors and the 6 fuel injector clips into the fuel rail.
    2. Install the fuel rail and fuel injectors as an assembly.
    3. Install the 4 fuel rail bolts.
     Tighten to 10 Nm (89 lb-in).

    4. Connect the 6 fuel injector electrical connectors.


    5. Connect the fuel tube-to-fuel rail quick connect coupling. For additional information, refer to FUEL
    SYSTEM - GENERAL INFORMATION article.
    6. Install the upper intake manifold. For additional information, refer to ENGINE - 3.5L article.
    7. Connect the battery ground cable. For additional information, refer to BATTERY, MOUNTING AND
    CABLES article.

    Microsoft
    Friday, September 25, 2009 11:25:28 AM Page 6 © 2005 Mitchell Repair Information Company, LLC.

    You might also like