CHANGES DETAILS DATE WRITTEN APPROVED

Modificationof User servicedatasheet 2016.06.24 J.G.Han D.K.JI

DL220-5
CONTENTS PAGE

1. GENERAL SPECIFICATION ........................................................................ 2

2. SPECIFICATION COMPARISON ................................................................. 3
3. ENGINE SYSTEM ....................................................................................... 4
4. HYDRAULIC SYSTEM ................................................................................ 6
5. DRIVE MECHANISM
5.1 TRAVEL SYSTEM ................................................................................ 9
5.2 BRAKE SYSTEM................................................................................ 14
5.3 STEERING SYSTEM.......................................................................... 15
6. HYDRAULIC CYLINDERS ......................................................................... 16
7. FRONT
7.1 FRONT LINKAGE PIN SIZES ............................................................. 16
7.2 OPTION PIPING................................................................................. 17
8. DIMENSIONS AND WORKING RANGE .................................................... 18
9. PERFORMANCE DATA ............................................................................. 21
10. NOISE LEVEL ......................................................................................... 22
11. USER SERVICE DATA............................................................................. 22
12. SUB GROUP WEIGHTS .......................................................................... 23
13. LIFTING CAPACITY ................................................................................ 24

MODEL DL220-5 DOCUMENT No 1/23

D
DOOO
OSSAAN
N IIN
NFFR
RAAC
COOR
REE C
COO..,, LLTTD
D..
 1. GENERAL SPECIFICATION
[DL220-5]
ITEMS UNIT EUST NAST
OPERATING WEIGHT kg(lb) 12,790(28,197) 12,420(27,381)
RATED POWER (Gross) kW(hp)/rpm 119(160)/2,100
ENGINE
RATED POWER (Net) kW(hp)/rpm 119(160)/2,100
(SAE J1995 Gross)
MAX. POWER (Gross) kW(hp)/rpm 119(160)/2,100
(SAE J1349 Net)
MAX. TORQUE (Gross) N.m(lbf.ft)/rpm 735(542)/1,400
SYSTEM PRESSURE (WORK/STEER) bar(psi) 250(3,626)/195(2,828)
km/h 7.0/12.8/24.2/39
FORWARD (1/2/3/4)
TRAVEL SPEED (MPH) (4.3/8.0/15.0/29.2)
REVERSE (1/2/3) km/h (MPH) 7.4/13.5/25.4 (4.6/8.4/15.8)
FRONT SPEED (RAISE/DUMP/LOWER) sec 6.0/1.2/3.5
GRADEABILITY %( º) 58 (30)

TIRE SIZE - 20.5R25

BUCKET CAPACITY (SAE HEAPED) m3(yd3) 2.2 (BOT) 2.3 (BOC)

DUMP HEIGHT AT 45° H mm(ft in) 2,755 (9') 2,825 (9'3")
DUMP REACH AT 45° I mm(ft in) 1,130 (3'8") 1,065 (3'6"')
MAX. DUMP ANGLE (fully raised) L deg 48° ←
WORKING RANGE MAX. TILT ANGLE (on ground) deg 42° ←
MAX. TILT ANGLE (fully raised) M deg 59° ←
MAX. TILT ANGLE (at carry) K deg 48° ←
BUCKET HINGE HEIGHT J mm(ft in) 3,860 (12'8") ←
DIGGING DEPTH (0° level) mm(ft in) 95 (4") 90 (4")
OVERALL LENGTH A mm(ft in) 7,540(24’9”) 7,445(24’5”)
OVERALL WIDTH (bucket) B mm(ft in) 2,550 (8'4") ←
TRAVEL OVERALL HEIGHT C mm(ft in) 3,280 (10'9") ←
DIMENSION GROUND CLEARANCE G mm(ft in) 435 (1'5") ←
WHEEL BASE E mm(ft in) 3,010 (9'11") ←
TREAD F mm(ft in) 1,930 (6'4") ←
BREAKOUT FORCE kN(lbf) 101 (22,706) 102 (22,931)
MAX. STEERING ANGLE deg 40º
5,475/5,975 5,475/5,950
TURNING RADIUS (Tire edge/ Bucket edge) O/P mm(ft in)
(18’ /19’7”) (18’/19’6”)
SOUND LEVEL In CAB (ISO 6396) dB(A) 71 / 72 LpA
(Measured / Guaranteed) EXTERNAL (ISO6395) dB(A) 102/ 103 LwA
FUEL TANK CAPACITY Liter(USgal) 222 (58.6)
· EUST : (NAST) + LIS + EMR + Rear View Camera + Full Fender
· ROPS/FOPS Cabin is Standard.
· Every dimensions, weights, and performance data based on SAE J732C and SAE742B.

MODEL DL220-5 DOCUMENT No 2/23

D
DOOO
OSSAAN
N IIN
NFFR
RAAC
COOR
REE C
COO..,, LLTTD
D..
 2. SPECIFICATION COMPARISON
CAT J/DEERE VOLVO
ITEMS UNIT
930M 544K L70H
OPERATING WEIGHT ton 13.99 13 13.45
MODEL - C7.1 ACERT PVX 6068 D6J
EMISSION CONTROL - TIER 4F TIER 4i TIER 4F
FUEL CONTROL - ELEC. ELEC. ELEC.
ENGINE
Displacement Liter 7.1 6.8 5.7
(SAE J1995)

RATED POWER (Gross) kW/rpm 119/1,600 121/1,800 127/1,400~1,700

MAX. TORQUE (Gross) N.m 804 683 853

SYSTEM PRESSURE (WORK/STEER) bar 280/241 251/251 260/210

TRAVEL SPEED FORWARD km/h 1-13/13/27/40 7.2/11.9/22.8/35.7 7/14/27/44

REVERSE (1/2/3) km/h 1-13/13/27/40 7.2/12.6/24.1 7/14/27/44

FRONT SPEED (RAISE/DUMP/LOWER) sec 5.7/1.7/2.7 5.8/1.2/3.2 5.1/1.3/2.7
TIRE SIZE - 20.5R25(L3) 20.5-25(L3) 20.5R25
BREAKOUT FORCE kN 124 101 98.8
BUCKET CAPACITY (SAE HEAPED) m3 2.3 BOC 2.3 BOC 2.3 BOC
DUMP HEIGHT AT 45° mm 2,828 2,760 2,830
DUMP REACH AT 45° mm 1,064 990 1,060
MAX. DUMP ANGLE (fully raised) deg 49 49 46
WORKING
MAX. TILT ANGLE (on ground) deg - - 43
RANGE
MAX. TILT ANGLE (fully raised) deg 54 55 56
MAX. TILT ANGLE (at carry) deg 45 42 48
BUCKET HINGE HEIGHT mm 3,907 3,820 3,870
DIGGING DEPTH (0° level) mm 100 95 101
OVERALL LENGTH mm 7,530 7,430 7,370
OVERALL WIDTH (bucket) mm 2,550 2,540 2,650

TRAVEL OVERALL HEIGHT mm 3,340 3,240 3,280

DIMENSION GROUND CLEARANCE mm 397 400 450

WHEEL BASE mm 3,000 2,930 3,000

TREAD mm 1,930 1,950 1,930

MAX. STEERING ANGLE deg 40 40 40
TURNING RADIUS (Tire edge/ Bucket edge) mm 5,402/5,945 5,000/- -
SOUND LEVEL in CAB (ISO 6396) dB(A) 68 - 68
EXTERNAL SOUND LEVEL(ISO6395, 2000/14/EC) dB(A) - - 104
FUEL TANK CAPACITY Liter 195 325 222

MODEL DL220-5 DOCUMENT No 3/23

D
DOOO
OSSAAN
N IIN
NFFR
RAAC
COOR
REE C
COO..,, LLTTD
D..
 3. ENGINE SYSTEM
1) ENGINE
EMISSION U.S. EPA TIER 4 (EU Stage IV)
MAKER & MODEL Doosan DL06P
MAX POWER at SAEJ1995 gross 119 kW ( 160 hp) / 2,100 RPM
MAX TORQUE at SAEJ1995 gross 735 N.m ( 542 lb.f) / 1,400 RPM
FUEL CONSUMPTION (min. ~ rated) 152 ~ 168 g/ps.hr
TURBO CHARGED, WATER COOLED
TYPE
EXHAUST GAS RECIRCULATION, DIRECT INJECTION
INJECTION SYSTEM COMMON RAIL
AFTER TREATMENT DOC, SCR
DISPLACEMENT 5.9 liter (360 in3)
No. OF CYLINDER 6
BORE DIA. & STROKE Φ100x125 mm
HIGH IDLE SPEED 2,290 +- 50 rpm
LOW IDLE SPEED 800 +-20 rpm
STARTING MOTOR 24 V x 6 kW

2) ALTERNATOR
VOLTAGE 24 V
RATING AMPERES 80 A

3) BATTERY
SYSTEM VOLTAGE 24 V
QUANTITY 12 V x 2
CAPACITY (AMP) 100 AH
COLD CRANKING AMPERES 900 CCA

4) AIR CLEANER
TYPE DRY, DOUBLE ELEMENT
FILTRATION AREA 9 m2 (7.6 + 1.4)
SIZE (WIDTH X HEIGHT) 208.5mm x 489.5mm
INITIAL AIR RESTRICTION 200mm H2O at 12.5m3/min AIR FLOW

5) PRE CLEANER
AIR RESTRICTION RATE 90 H2O at 25.8 m3 /mm
AIR CONTAMINANTS 84% (A.C COARSE DUST)

MODEL DL220-5 DOCUMENT No 4/23

D
DOOO
OSSAAN
N IIN
NFFR
RAAC
COOR
REE C
COO..,, LLTTD
D..
 6) FAN (Driven by hydraulic motor)
TYPE SUCKER, 8 BLADE, PLASTIC
SIZE Φ711mm (28inch)
RPM AT RATED ENGINE RPM 500~1,500 MAX. (CONTINUOUS)

6) ENGINE PERFORMANCE CUREVE

CONDITION(SAE J1995) SPECIFICATION
ATMOSPHERIC PRESSURE 760 mmHg (25.7℃)
WARMING UP SUFFICIENT
COOLING FAN NOT INSTALLED
ALTERNATOR NOT INSTALLED
AIR CLEANER INSTALLED
MUFFLER INSTALLED

MODEL DL220-5 DOCUMENT No 5/23

D
DOOO
OSSAAN
N IIN
NFFR
RAAC
COOR
REE C
COO..,, LLTTD
D..
 4. HYDRAULIC SYSTEM
1) MAIN PUMP
TYPE VARIABLE DISPLACEMENT AXIAL PISTON PUMP
QUANTITY 1
DISPLACEMENT 74 cc/rev
MAX. FLOW RATE 155 L/min ( 40.9 GPM)
TANK PRESSURIZING DEVICE SEMI PRESSURIZED (AIR BREATHER)
PUMP CUT-OFF PRESSURE 250±5 bar (3,626 psi)

2) CONTROL VALVE
CLOSED-CENTER(LS) HYDRAULIC SYSTEMS WITH VARIABLE
TYPE
PUMPS, PILOT CONTROL w/ FLOAT SPOOL
QUANTITY OF SPOOLS 2
SPOOL ARRANGEMENT ARM - BUCKET
OVERLOAD RELIEF OF BUCKET 280±5 bar (4,061±72 psi)
OVERLOAD RELIEF OF ARM 310±5 bar (4,496±72 psi)

3) REMOTE CONTROL VALVE (STD)

PILOT OPERATED JOYSTICK
TYPE WITH 3rd LEVER VALVE, FNR SWITCH
(DETENT COILS- ARM RAISE/FLOAT, BUCKET CROWD)
PRESSURE 16.8 bar AT 7.25mm ( 246.9 psi AT 0.285 inch)
STROKE CHARACTER 30 bar ( 435 psi) AT DETENT

4) REMOTE CONTROL VALVE (OPT)

PILOT OPERATED FINGER TIP
TYPE LEVER (2 or 3 LEVER) WITH FNR SWITCH
(DETENT COILS- ARM RAISE/FLOAT, BUCKET CROWD)
PRESSURE 16.5 bar AT 7.5 mm ( 239 psi AT 0.295 inch)
STROKE CHARACTER 30 bar ( 435 psi) AT DETENT

5) BRAKE & PILOT & FAN MOTOR SUPPLY VALVE

BRAKE CHARGING 100 ~ 160 bar (1,450 ~ 2,320 psi)
PILOT REDUCING PRESSURE MAX. 30 bar ( 435 psi)
SOLENOID VALVE Q'TY PILOT CUT-OFF-1
SOLENOID VOLTAGE DC 24V

MODEL DL220-5 DOCUMENT No 6/23

D
DOOO
OSSAAN
N IIN
NFFR
RAAC
COOR
REE C
COO..,, LLTTD
D..
 6) ACC. BLOCK
SOLENOID VALVE Q'TY PARKING -1
SOLENOID VOLTAGE DC 24V

7) HYDRAULIC FAN MOTOR

DISPLACEMENT 19 cc/rev
MAX. PRESSURE 210 bar (3,045 psi)
COOLING FAN RPM 400 ~ 1,500 RPM

8) AIR BREATHER
RELIEF PRESSURE 0.46±0.04 bar (6.7psi)
VACUUM RELIEF 0.04 ~ 0.05 bar (0.6 ~ 0.7psi)

9) ACCUMULATOR ; BRAKE
TYPE BLADDER (cc OIL IS FILLED WITH NITROGEN GAS)
CHARGE PRESSURE, VOLUME (Service) 30±1bar, 0.75 L ( 435 psi, 0.2 USgal)

10) ACCUMULATOR ; PILOT

TYPE BLADDER
CHARGE PRESSURE, VOLUME 15±1 bar, 0.32 L ( 217.6psi, 0.1 USgal)

11) ACCUMULATOR ; LIS

TYPE PISTON TYPE
CHARGE PRESSURE, VOLUME 15±1 bar, 3 L ( 217.6psi, 0.8USgal)

12) FILTERS ; RETURN

TYPE GLASS FIBER
FILTERATION 10 µ

13) DC MOTOR-PUMP ; EMERGENCY STEER

13-1) PUMP
TYPE GEAR, BUILT IN CHECK & RELIEF
THEORETICAL DISPLACEMENT 16 cc/rev
RELIEF PRESSURE 62 bar ( 899psi)
ALLOWABLE SPEED 3,000 rpm

MODEL DL220-5 DOCUMENT No 7/23

D
DOOO
OSSAAN
N IIN
NFFR
RAAC
COOR
REE C
COO..,, LLTTD
D..
 13-2) ELECTRIC MOTOR

24V DC, DOUBLE TERMINAL, WATER SEALED,

TYPE MEDIUM DUTY w/ FOOT MOUNTING BRACKET
BUILT IN STARTER SWITCH

13-3) EMERGENCY STEER CIRCUIT

MODEL DL220-5 DOCUMENT No 8/23

D
DOOO
OSSAAN
N IIN
NFFR
RAAC
COOR
REE C
COO..,, LLTTD
D..
 5. DRIVE MECHANISM
5.1 TRAVELING SYSTEM
1) TRANSMISSION
4SPEED FULL AUTO (STANDARD)
TYPE POWER-SHIFT, COUNTERSHAFT,
ENGINE DIRECT MOUNTED
TORQUE CONVERTER STATOR FIXED WHEEL STATOR
TORQUE CONVERTER STALL RATIO 2.664
TORQUE CONVERTER SIZE 300 mm
CHARGING PUMP FLOW 82.8 l/min at 2,300rpm
HYDRAULIC PUMP P.T.O RATIO 1
POWER SHIFT CONTROL PRESSURE 16 + 2 bar
CONVERTER SAFETY RELIEF PRESSURE: 11 bar
CONVERTER OUTPUT LIMIT TORQUE Max 1198 N.m (884 lbf.ft)
MAX. ROTATING SPEED (TM OUPUT) 3,716 rpm
ELECTRIC SHIFT WITH PROPORTIONAL
SHIFT CONTROL
VALVE, SOLENOID VALVES (DC 24 V)
CONTROL UNIT EST – 37A
FRONT – 6C MECHANICS
OUTPUT FLANGE
REAR –6C MECHANICS
CONTROL CIRCUIT 4SPEED

2) PROPELLER SHAFT
FRONT ARTIC REAR
MAX. ALLOWABLE TORQUE 3,433 N.m (2,532.4 lbf.ft)
MIN. JOINT ANGLE 23°/23° 23°/23° 10°/10°
MAX. PHASE MISALIGNMENT ±1.3° ±1.3° ±1.5°
MAX. ALLOWABLE SPEED 5,000 rpm 5,000 rpm 5,000 rpm
COUPLING DIMENSION 6C 6C 6C

MODEL DL220-5 DOCUMENT No 9/23

D
DOOO
OSSAAN
N IIN
NFFR
RAAC
COOR
REE C
COO..,, LLTTD
D..
MODEL DL220-5 DOCUMENT No 10/23
D
DOOO
OSSAAN
N IIN
NFFR
RAAC
COOR
REE C
COO..,, LLTTD
D..
 3) DIFFERENTIAL HYDRAULIC LOCK (OPT)
ACTUATION PRESSURE TO AXLE 16 bar + 4 bar

MODEL DL220-5 DOCUMENT No 11/23

D
DOOO
OSSAAN
N IIN
NFFR
RAAC
COOR
REE C
COO..,, LLTTD
D..
 3) FRONT AXLE
FULLY FLOATING PLANETARY-TYPE
TYPE HUB DRIVE FIXED MOUNTING
LSD 30%(STANDARD), DHL(OPTION)
OVERALL REDUCTION RATIO 21.527
AXLE LOAD (EMPTY ) 5,616 kg (12,381 lb)
AXLE LOAD (BREAKOUT ) 21,955 kg (48,402 lb)
WHEEL BOLT P.C.D Φ425mm
BRAKE TYPE WET DISC
BRAKE TORQUE per WHEEL 14,209 N.m at 55.8 bar
DRIVE FLANGE 6C MECHANICS

4) REAR AXLE
FULLY FLOATING PLANETARY-TYPE
TYPE HUB DRIVE FIXED MOUNTING
LSD 30%(STANDARD), OPEN(OPTION)
OVERALL REDUCTION RATIO 21.527
AXLE LOAD (EMPTY ) 7,075 kg (15,598 lb)
AXLE LOAD (EXCAVATING ) 9,264 kg (20,424 lb)
WHEEL BOLT P.C.D Φ425mm
BRAKE TYPE WET DISC
BRAKE TORQUE per WHEEL 14,209 N.m at 55.8 bar
DRIVE FLANGE 6C MECHANICS

5) TIRE & WHEEL

TYPE TYPE TUBELESS, SINGLE
20.5-R25 (L3),
TIRE SPEC.
20.5-R25 16PR (L3)
RIM SPEC. 17.00/1.7 x 25
DISC OFFSET 28mm

6) TRAVELING PERFORMANCE (REFER TO NEXT PAGE)

MAX. SPEED 39 km/h ( 24.2 MPH)
MAX. TRACTIVE EFFORT 11.2 ton ( 24,796 lb)
GRADEABILITY 30° (58%)

MODEL DL220-5 DOCUMENT No 12/23

D
DOOO
OSSAAN
N IIN
NFFR
RAAC
COOR
REE C
COO..,, LLTTD
D..
 l 4WG - Gear ratio : 4.012/2.174/1.088/0.619

MODEL DL220-5 DOCUMENT No 13/23

D
DOOO
OSSAAN
N IIN
NFFR
RAAC
COOR
REE C
COO..,, LLTTD
D..
5.2 BRAKE SYSTEM
1) FAN & BRAKE PUMP
TYPE VARIABLE DISPLACEMENT AXIAL PISTON PUMP
DISPLACEMENT 18 cc/rev
MAX. SUPPLY FLOW 37.8 L/min ( 10GPM)

2) SERVICE BRAKE PEDAL VALVE (DUAL)

SYSTEM FULL HYDRAULIC, SEPARATE DUAL LINE
BRAKE PRESSURE 60±3 bar ( 870 psi)
PEDAL FORCE 25±2kg at 60 bar, 160mm RAD.

3) PARKING BRAKE
SPRING-APPLIED HYDRAULIC-RELEASED,
TYPE SLIDING CALIPER DISC BRAKE ON THE
FACE OF TRANSMISSION
RELEASE PRESSURE 100 bar (1,450 psi)
MAX. CLAMPING FORCE
34 kN (7,644 lbf)
(1mm CLEARANCE)
MAX. STATIC CIRUMFERENTIAL FORCE 25.16 kN (5,656 lbf)

4) BRAKE PERFORMANCE
BRAKING DISTANCE 10.2 m at 35 km/h (33'6" at 21.7 MPH)

MODEL DL220-5 DOCUMENT No 14/23

D
DOOO
OSSAAN
N IIN
NFFR
RAAC
COOR
REE C
COO..,, LLTTD
D..
 5.3 STEERING SYSTEM
1) PUMP
TYPE VARIABLE DISPLACEMENT AXIAL PISTON PUMP
QUANTITY 1
DISPLACEMENT 74 cc/rev
MAX. FLOW RATE 155 L/min ( 40.9 GPM)

2) STEERING UNIT
TYPE LOAD SENSING, NON REACTION
DISPLACEMENT 630 cc/rev

3) PRIORITY VALVE
TYPE INTERNAL PILOT DYNAMIC SIGNAL

4) ACCUMULATOR; STEER
TYPE BLADDER (cc OIL IS FILLED WITH NITROGEN GAS)
CHARGE PRESSURE, VOLUME 35±1 bar, 0.16 L ( 507 psi, 0.04 USgal)

5) STEERING CYLINDER
CUSHION STROKE 30 mm (1")

MODEL DL220-5 DOCUMENT No 15/23

D
DOOO
OSSAAN
N IIN
NFFR
RAAC
COOR
REE C
COO..,, LLTTD
D..
 6. HYDRAULIC CYLINDERS
[DL220-5]
UNIT LIFT BUCKET STEER
QUANTITY - 2 1 2
BORE mm(ft in) 115 (5") 130 (5") 70 (3")
ROD DIA. mm(ft in) 75 (3") 80 (3") 45 (2")
STROKE mm(ft in) 790 (2'7") 515 (1'8") 425 (1'5")
CLOSED LENGTH mm(ft in) 1,255 (4'1") 955 (3'2") 795 (2'7")
RETRACTING CUSHION - X X O
EXTENDING CUSHION - X X X

7. FRONT
1) FRONT LINKAGE PIN SIZES
[DL220-5]

POINT UNIT DIA. LENGTH

A mm(ft in) 80 (3") 255 (10")
B mm(ft in) 65 (3") 250 (10")
C mm(ft in) 80 (3") 216 (9")
D mm(ft in) 65 (3") 150 (6")
E mm(ft in) 80 (3") 168 (7")
F mm(ft in) 90 (4") 290 (11")
G mm(ft in) 80 (3") 164 (6")
H mm(ft in) 80 (3") 180 (7")
I mm(ft in) 70 (3") 209 (8")

MODEL DL220-5 DOCUMENT No 16/24

D
DOOO
OSSAAN
N IIN
NFFR
RAAC
COOR
REE C
COO..,, LLTTD
D..
2) OPTION PIPING(Log Fork)

MODEL DL220-5 DOCUMENT No 17/24

D
DOOO
OSSAAN
N IIN
NFFR
RAAC
COOR
REE C
COO..,, LLTTD
D..
 8. DIMENSIONS AND WORKING RANGE
[DL220-5]

MODEL DL220-5 DOCUMENT No 18/24

D
DOOO
OSSAAN
N IIN
NFFR
RAAC
COOR
REE C
COO..,, LLTTD
D..
MODEL DL220-5 DOCUMENT No 19/24
D
DOOO
OSSAAN
N IIN
NFFR
RAAC
COOR
REE C
COO..,, LLTTD
D..
Loader type General purpose (Z-BAR) High Lift
Bucket mount PIN ON PIN ON PIN ON PIN ON
Bolt-on Bolt-on
Configuration Unit Teeth Teeth
edge edge
m3 2.2 2.3 1.9 2.0
Capacity heaped ISO/SAE
yd3 2.9 3.0 2.5 2.6
General General General General
Tooth type
Purpose Purpose Purpose Purpose
mm 2,550 2,550 2,550 2,550
Bucket width B
ft in 8'4" 8'4" 8'4" 8'4"
kN 102 101 113 112
Breakout force
lbf 22,931 22,706 25,403 25,180
kg 9,705 9,630 8,880 8,805
Static tipping load (straight)
lb 21,395 21,230 19,577 19,412
kg 8,570 8,505 7,840 7,775
Static tipping load (at full turn)
lb 18,894 18,750 17,284 17,141
Dump height (at 45˚) mm 2,755 2,825 3,200 3,270
H
(at fully raised) ☞1) ft in 9' 9'3" 10'6" 11'9"
Dump reach (at 45˚) mm 1,130 1,065 1,100 1,040
I
(at fully raised) ☞1) ft in 3'8” 3'6" 3'7" 3'5"
Dump height (at max. dump) mm 720 810 830 910
(at max. reach) ☞1) ft in 2'4" 2'8" 2'9" 3'
Dump reach (at max. dump) mm 1,490 1,455 1,860 1,820
(at max. reach) ☞1) ft in 4’11” 4'9" 6'1” 6'
mm 95 90 205 200
Digging depth
ft in 4" 4" 8" 8"
mm 3,860 3,860 4,300 4,300
Height at bucket pivot point J
ft in 12'8" 12'8" 14'1" 14'1"
Max. tilt angle at carry position deg 48 48 51 51
Max. tilt angle at fully raised M deg 59 59 61 61
Max. tilt angle on ground K deg 42 42 43 43
Max. tilt angle at max. reach deg 59 59 58 58
Max. dump angle at max. reach L deg 65 65 60 60
Max. dump angle on ground deg 64 64 63 63
Max. dump angle at fully raised deg 48 48 46 46
mm 5,475 5,475 5,475 5,475
External radius at tire side O
ft in 18' 18' 18' 18'
mm 5,975 5,950 6,130 6,100
External radius at bucket edge Q
ft in 19'7" 19'6" 20'1" 20'
mm 3,010 3,010 3,010 3,010
Wheel base E
ft in 9'11" 9'11" 9'11" 9'11"
mm 2,460 2,460 2,460 2,460
Width at tyres
ft in 8'1" 8'1" 8'1" 8'1"
mm 1,930 1,930 1,930 1,930
Tread F
ft in 6'4" 6'4" 6'4" 6'4"
mm 435 435 435 435
Ground clearance G
ft in 1'5" 1'5" 1'5" 1'5"
mm 7,540 7,445 7,995 7,905
Overall length A
ft in 24’9” 24’5” 26’3” 25’11”
mm 3,280 3,280 3,280 3,280
Overall height C
ft in 10'9" 10'9" 10'9" 10'9"
Tyre size 20.5R25 L3
kg 12,365 12,420 12,775 12,835
Operating weight
lb 27,260 27,381 28,164 28,296
☞1) Measured to the tip of the bucket teeth

MODEL DL220-5 DOCUMENT No 20/24

D
DOOO
OSSAAN
N IIN
NFFR
RAAC
COOR
REE C
COO..,, LLTTD
D..
 9. PERFORMANCE DATA
1) PRESSURE SETS
WORKING (PUMP CUT-OFF) 250 ± 5 bar (3,626 ± 72 psi)
STEERING RELIEF (LS PORT SIDE) 175 ± 10 bar (2,538 ± 145 psi)
(STEER PUMP SIDE) 195 ± 10 bar (2,828 ± 145 psi)
PILOT CONTROL 30 ± 2 bar (435 ± 29 psi)
BRAKE ACCUMULATOR CHARGING 100 ~ 160 bar (1,450 ~ 2,320 psi)
SERVICE BRAKE 60 ± 3 bar (870 ± 43 psi)
FAN MOTOR MAX. 160 ± 10 bar (2,320 ± 145 psi)
PARKING BRAKE RELEASE 100 ± 5 bar (1,450 ± 72 psi)
T/M SELECTION PRESSURE 16 + 2 bar (232 + 29 psi)

2) SPEED & FORCE

OPERATION UNIT SPEED-FORCE REMARKS
UP (Z-bar) SEC 6 ± 0.5
ARM
DOWN (Z-bar) SEC 3.5 ± 0.4
CROWD (Z-bar) SEC 1.9 ± 0.3 Max. Height
BUCKET
DUMP (Z-bar) SEC 1.2 ± 0.3
STEERING LOCK TO LOCK TURN 4.3
HIGH RPM 2,290 ± 50 (On machine)
E/G RPM
LOW RPM 800 ± 20 (On machine)
HYDRAULIC STALL RPM 1,930
E/G RPM CONVERTER STALL RPM 2,017
T/C + HYD. STALL RPM 1,560
COOLING FAN E/G HIGH RPM 500~1500
TRAVEL SPEED (1/2/3/4) km/h 7.0/12.8/24.2/39
BRAKING DISTANCE m 10.2 m at 35 km/h
MAX. TRACTIVE EFFORT ton 11.2
BREAKOUT FORCE kN 102
PAYLOAD ton 4.25
STATIC TIPPING LOAD (straight) ton 9.63
STATIC TIPPING LOAD (full turn) ton 8.5

MODEL DL220-5 DOCUMENT No 21/24

D
DOOO
OSSAAN
N IIN
NFFR
RAAC
COOR
REE C
COO..,, LLTTD
D..
 10. NOISE LEVEL
EXTERNAL (Measured / Guaranteed) (LWA) 102/ 103 dB(A) (ISO 6395)
OPERATOR’S CABIN (Measured / Guaranteed) (LPA) 71 / 72 dB(A) (ISO 6396)

11. USER SERVICE DATA

Service interval [hours]
No. Items to check Service Qty.
10 50 250 500 1000 1500 2000 4500
1 Front Joint Pin Grease 4 F100 W10
2 Front Joint Pin Grease 9 F100 W10
3 Articulation Pin Grease 2
4 Rear Axle Pivot Grease 3
5 Steering Cylinder Grease 4
6 Front Propeller Soft Bearing Grease 1
1)
7 Fuel Tank Diesel 235(222) L V D
2) 3)
8 Hydraulic Oil Tank Hydraulic Oil 120(85) L V
9 Hydraulic Oil Sampling - V
10 Engine Oil Pan Engine Oil 27 L V
4)
11 Radiator Coolant 31.4 L V
5)
12 Front Axle Axle Gear Oil 23 L F
5)
13 Rear Axle Axle Gear Oil 23 L F
14 Transmission Transmission Oil 40 L V F
15 Fuel Filter Cartridge 1
16 Engine Oil Filter Cartridge 1 F
17 Transmission Filter Cartridge 1 F
18 Full Flow Filter Element 1 F
19 Oil Suction Filter Strainer 1 C
20 Fan, Brake and Pilot Filter Element -
Air Cleaner (Outer) Element 1 C
21
Air Cleaner (Inner) Element 1
22 Turbo Precleaner Case 1 Check Frequently and then clean with air
Air Conditioner Filter (Outer) Cartridge 1 C
23
Air Conditioner Filter (Inner) Cartridge 1 C
24 Centrifugal Oil Cleaner Case -
25 Water Separator Cartridge 1 D
26 Air Breather Filter Element 1
27 Fuel Cap Filter Element 1
28 DEF(AdBlue) Filter Element 1
29 DEF(AdBlue) Tank DEF-AdBlue 31.5 L Refill urea when urea light turns on
30 Oil Bath Precleaner(Option) Engine Oil - V,C
31 DEF(AdBlue) Breather Filter Cartridge 1
V: Maintenance and Refill
C: Cleaning
D: Drain Water

MODEL DL220-5 DOCUMENT No 22/24

D
DOOO
OSSAAN
N IIN
NFFR
RAAC
COOR
REE C
COO..,, LLTTD
D..
F: First Time Exchange Only
F100: Every 10 Hours For First 100 Hours
W10: Every 10 Hours If Operating In Water
: Replacement On Every Interval
1) Total Tank Capacity(max. possible refueling volume)
2) Total Tank Capacity(Level)
3) For Korea, replace every 4,000 hours
4) For Korea, replace every 6,000 hours
5) For Korea, first time exchange at 200 hr

12. SUB GROUP WEIGHTS

ITEM UNIT WEIGHT REMARKS
COUNTERWEIGHT kg(lb) 554(1221)
FRONT FRAME kg(lb) 1,159(2,555)
REAR FRAME kg(lb) 1,124(2,478)
OIL TANK kg(lb) 105(231) w/o Oil
FUEL TANK kg(lb) 200(441) w/o Oil
DPF kg(lb) 40(88)
ENGINE kg(lb) 753(1,660) w/Cac pipe& Oil
TRANSMISSION kg(lb) 398(877) w/o Oil, w/o Lock-up
AXLE_FRONT kg(lb) 770(1,698) w/ Oil
AXLE_REAR kg(lb) 780(1,720) w/ Oil
TIRE(20.5-25 16PR) at Each Tire kg(lb) 209(461)
TIRE (20.5R25VMT, L3) at Each Tire kg(lb) 236(520)
RIM( x 25) at Each Rim kg(lb) 115(254)
PROPELLER SHAFTS (3EA) kg(lb) 60(132)
RADIATOR kg(lb) 154(340) w/o Water
MAIN PUMP kg(lb) 45(99)
CONTROL VALVE kg(lb) 30(66) 3 SP MCV 기준
COVER GROUP kg(lb) 332(732)
AXLE PIVOT SUPPORT_FRONT kg(lb) 69(152)
AXLE PIVOT SUPPORT_REAR kg(lb) 116(256)
CABIN ASS'Y (ROPS) kg(lb) 835(1,840)
LOADER ARM ASS'Y kg(lb) 787(1,735)
TILT LEVER ASS'Y kg(lb) 212(467)
2.2 m3 BUCKET ASS'Y (w/ Edge) kg(lb) 844(1,861)
LINK kg(lb) 43(95)
CYLINDER_ARM kg(lb) 102(225)
CYLINDER_BUCKET kg(lb) 107(236)

MODEL DL220-5 DOCUMENT No 23/24

D
DOOO
OSSAAN
N IIN
NFFR
RAAC
COOR
REE C
COO..,, LLTTD
D..
 13. LIFTING CAPACITY (kgf)
BUCKET UNIT 2.2 ㎥ BOT 2.3 ㎥ BOC
Lifting Capacity to Max.Height Kgf (lbf) 6,710 (14,795) 6,665 (14,695)

MODEL DL220-5 DOCUMENT No 24/24

D
DOOO
OSSAAN
N IIN
NFFR
RAAC
COOR
REE C
COO..,, LLTTD
D..